Professional Documents
Culture Documents
English
Installation Manual
Manuel dinstallation
Franais
MULTIMEDIA NAVIGATION RECEIVER
RECEPTEUR DE NAVIGATION MULTIMEDIA
AVIC-8000NEX
AVIC-7000NEX
AVIC-6000NEX
AVIC-5000NEX
AVIC-X8610BS
<CRD4769-A>1
Black plate (2,1)
Contents
2 En
<CRD4769-A>2
Black plate (3,1)
Section
Precautions 01
English
Your new product and this Important safeguards
manual WARNING
! The navigation features of this product Pioneer does not recommend that you install
(and the rear view camera option if pur- this product yourself. This product is de-
chased) are intended solely to aid you in signed for professional installation only. We
the operation of your vehicle. It is not a sub- recommend that only authorized Pioneer ser-
stitute for your attentiveness, judgment vice personnel, who have special training
and care when driving. and experience in mobile electronics, set up
! Never use this product to route to hospi- and install this product. NEVER SERVICE
tals, police stations, or similar facilities in THIS PRODUCT YOURSELF. Installing or
an emergency. Please call the appropriate servicing this product and its connecting
emergency number. cables may expose you to the risk of electric
! Do not operate this product, any applica- shock or other hazards, and can cause da-
tions, or the rear view camera option (if pur- mage to this product that is not covered by
chased) if doing so will divert your attention warranty.
in any way from the safe operation of your
vehicle. Always observe safe driving rules ! Read this manual fully and carefully before
and follow all existing traffic regulations. If installing this product.
you experience difficulty in operating this ! Keep this manual handy for future refer-
product or reading the display, park your ence.
vehicle in a safe location and apply the ! Pay close attention to all warnings in this
parking brake before making the necessary manual and follow the instructions care-
adjustments. fully.
! This manual explains how to install this ! This product may in certain circumstances
product in your vehicle. Operation of this display inaccurate position of your vehicle,
product is explained in the separate man- the distance of objects shown on the
uals. screen, and compass directions. In addi-
! Do not install this product where it may (i) tion, the system has certain limitations, in-
obstruct the drivers vision, (ii) impair the cluding the inability to identify one-way
performance of any of the vehicles operat- streets, temporary traffic restrictions and
ing systems of safety features, including potentially unsafe driving areas. Please ex-
airbags, hazard lamp buttons, or (iii) impair ercise your own judgment in the light of ac-
the drivers ability to safely operate the vehi- tual driving conditions.
cle. In some cases, it may not be possible ! As with any accessory in your vehicles in-
to install this product because of the vehi- terior, this product should not divert your
cle type or the shape of the vehicle interior. attention from the safe operation of your
! Model icons shown in this manual indicate vehicle as it may result in serious injury or
that the description is intended for the death. If you experience difficulty in operat-
models indicated by the icons. ing the system or reading the display,
If the following icon is shown, the descrip- please make adjustments while safely
tion is applied only to the model shown. parked.
e.g.) ! Please remember to wear your seat belt at
all times while operating your vehicle. If
8000NEX
you are in an accident, your injuries can be
considerably more severe if your seat belt
is not properly buckled.
En 3
<CRD4769-A>3
Black plate (4,1)
Section
01 Precautions
4 En
<CRD4769-A>4
Black plate (5,1)
Section
Connection 02
English
Precautions before damaged, resulting in a short circuit or
malfunction and permanent damage to
connecting the system the product.
! Do not cut the GPS antenna cable to
WARNING
shorten it or use an extension to make it
Do not take any steps to tamper with or dis-
longer. Altering the antenna cable could
able the parking brake interlock system
result in a short circuit or malfunction.
which is in place for your protection. Tamper-
! Do not shorten any leads. If you do, the
ing with or disabling the parking brake inter-
protection circuit (fuse holder, fuse resis-
lock system could result in serious injury or
tor or filter, etc.) may fail to work properly.
death.
! Never feed power to other electronic pro-
ducts by cutting the insulation of the
CAUTION power supply lead of this product and tap-
! If you decide to perform the installation ping into the lead. The current capacity of
yourself, and have special training and ex- the lead will be exceeded, causing over-
perience in the mobile electronics instal- heating.
lations, please carefully follow all of the
steps in the installation manual.
! Secure all wiring with cable clamps or
electrical tape. Do not allow any bare wir-
Before installing this product
ing to remain exposed. ! Use this unit with a 12-volt battery and ne-
! Do not directly connect the yellow lead of gative grounding only. Failure to do so may
this product to the vehicle battery. If the result in a fire or malfunction.
lead is directly connected to the battery, ! To avoid shorts in the electrical system, be
engine vibration may eventually cause sure to disconnect the () battery cable be-
the insulation to fail at the point where fore installation.
the wire passes from the passenger com-
partment into the engine compartment. If
the yellow leads insulation tears as a re-
sult of contact with metal parts, short-cir-
cuiting can occur, resulting in
considerable danger.
! It is extremely dangerous to allow cables
to become wound around the steering col-
umn or shift lever. Be sure to install this
product, its cables, and wiring away in
such so that they will not obstruct or hin-
der driving.
! Make sure that the cables and wires will
not interfere with or become caught in
any of the vehicles moving parts, espe-
cially the steering wheel, shift lever, park-
ing brake, sliding seat tracks, doors, or
any of the vehicles controls.
! Do not route wires where they will be ex-
posed to high temperatures. If the insula-
tion heats up, wires may become
En 5
<CRD4769-A>5
Black plate (6,1)
Section
02 Connection
ACC O O
F F
OF
OF
N
N
STAR
STAR
T T
6 En
<CRD4769-A>6
Black plate (7,1)
Section
Connection 02
English
Parts supplied
Parts marked (*) are supplied with AVIC-
8000NEX, AVIC-7000NEX and AVIC-6000NEX.
Lock tie*
En 7
<CRD4769-A>7
Black plate (8,1)
Section
02 Connection
Yellow
To terminal supplied with power regardless of
ignition switch position.
Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Note
When a subwoofer is connected to this product
instead of a rear speaker, change the rear output
setting in the initial setting. (Refer to Operation
Manual.) The subwoofer output of this product is With a two-speaker system, do not connect anything
monaural. to the speaker leads that are not connected to
speakers.
White Gray
Front speaker Front speaker
White/black Gray/black
Left Right
Green Violet
Rear speaker or Rear speaker or
subwoofer (4 ) subwoofer (4 )
Green/black Violet/black
When using a subwoofer of 70 W (2 ), be sure to connect with violet and violet/black leads of this
product. Do not connect anything with green and green/black leads.
Green Violet
8 En
<CRD4769-A>8
Black plate (9,1)
Section
Connection 02
English
This product
14 cm (5-1/2 in.)
Yellow/black (MUTE)
If you use equipment with a mute
function, connect that equipment to
the Audio Mute lead. If not, keep the
Power supply Audio Mute lead free of any
connections.
Power cord
Fuse (10 A)
Note
Audio source will be set to mute or attenuate, while
the following sounds will not be muted or
attenuated. For details, refer to Operation Manual.
Voice guidance of the navigation
Incoming ring tone and incoming voice of the
cellular phone that is connected to this product
via Bluetooth wireless technology
En 9
<CRD4769-A>9
Black plate (10,1)
Section
02 Connection
WARNING
IMPROPER CONNECTION MAY RESULT IN SERIOUS DAMAGE OR INJURY INCLUDING
ELECTRICAL SHOCK, AND INTERFERENCE WITH THE OPERATION OF THE VEHICLES ANTILOCK
BRAKING SYSTEM, AUTOMATIC TRANSMISSION AND SPEEDOMETER INDICATION.
CAUTION
It is strongly suggested that the speed pulse wire be connected for accuracy of navigation
and better performance.
Note
The position of the speed detection circuit and the position of the parking brake switch
vary depending on the vehicle model. For details, consult your authorized Pioneer dealer
or an installation professional.
WARNING
LIGHT GREEN LEAD AT POWER CONNECTOR IS
DESIGNED TO DETECT PARKED STATUS AND MUST
BE CONNECTED TO THE POWER SUPPLY SIDE OF THE
PARKING BRAKE SWITCH. IMPROPER CONNECTION
OR USE OF THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS INJURY OR
DAMAGE.
Ground side
10 En
<CRD4769-A>10
Black plate (11,1)
Section
Connection 02
English
This product
Power supply
Power cord
Note
When you use a rear view camera, please make
sure to connect this lead. Otherwise you cannot
switch to the rear view camera picture.
En 11
<CRD4769-A>11
Black plate (12,1)
Section
02 Connection
Antenna jack
Vehicle antenna
GPS antenna
3.55 m (11 ft. 8 in.)
Microphone
WARNING
To avoid the risk of accident and the potential violation of applicable laws, this
product should never be used while the vehicle is being driven except for
navigation purposes. And, also rear displays should not be in a location where it
is a visible distraction to the driver.
In some countries, the viewing of images on a display inside a vehicle even by
persons other than the driver may be illegal. Where such regulations apply they
must be obeyed and this products video source should not be used.
12 En
<CRD4769-A>12
Black plate (13,1)
Section
Connection 02
English
Connecting to separately sold power amp
Power amp
(sold separately)
Rear outputs RCA cables
(REAR OUTPUT) (sold separately)
Power amp
(sold separately)
15 cm (5-7/8 in.)
Power amp
(sold separately)
Front outputs
(FRONT OUTPUT)
This product
Power cord
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
Front speaker Rear speaker Subwoofer
Notes
You can change the RCA output of the subwoofer depending on your subwoofer
system. (Refer to Operation Manual.)
The subwoofer output of this product is monaural.
En 13
<CRD4769-A>13
Black plate (14,1)
Section
02 Connection
USB port 1
This product
HDMI port
USB cable
1.5 m (4 ft. 11 in.) iPhone with
Lightning connector
USB port 2
iPhone with
Lightning connector
14 En
<CRD4769-A>14
Black plate (15,1)
Section
Connection 02
English
Note Connecting an iPhone with
! When you connect the High Speed HDMI 30-pin connector
Cable, use the lock tie to fix it securely.
Notes
= For details, refer to Securing the High
Speed HDMI Cable on page 18. ! For details on how to connect an external de-
vice using a separately sold cable, refer to the
manual for the cable.
Connecting via the RGB input ! For details concerning the connection, opera-
5000NEX X8610BS tions and compatibility of iPhone, refer to Op-
eration Manual.
The following cables are required for the con-
nection.
! VGA/USB interface cable for iPod / iPhone Connecting via the AUX input
(CD-IV202AV) (sold separately) The USB interface cable for iPod / iPhone (CD-
! USB interface cable for iPod / iPhone (CD- IU201V) (sold separately) is required for the
IU52) (sold separately) connection.
! Lightning to VGA Adapter (Apple Inc. pro-
ducts) (sold separately) USB port 1
This product
USB port 1 This product
iPhone with
Lightning connector
iPhone with
30-pin connector
USB cable
1.5 m
VGA/USB interface cable (4 ft. 11 in.)
for iPod / iPhone
(CD-IV202AV) (sold separately)
En 15
<CRD4769-A>15
Black plate (16,1)
Section
02 Connection
Notes
! For details on how to connect an external de-
vice using a separately sold cable, refer to the
manual for the cable.
! For details concerning the connection and op-
RGB input
erations of Android device, refer to Operation
Manual.
! When you connect the High Speed HDMI
iPhone with
30-pin connector Cable, use the lock tie to fix it securely.
= For details, refer to Securing the High
Speed HDMI Cable on page 18.
16 En
<CRD4769-A>16
Black plate (17,1)
Section
Connection 02
English
Connecting an Android device Connecting the MirrorLink
with an MHL port device
This product The USB interface cable for use with Mirror-
Link devices (CD-MU200) (sold separately) is
required for the connection.
This product
USB cable
(supplied with
CD-AH200)
USB port 2
Note
For details on how to connect an external device
using a separately sold cable, refer to the manual
for the cable.
En 17
<CRD4769-A>17
Black plate (18,1)
Section
02 Connection
1 Hook
2 Lock tie
3 High Speed HDMI Cable
p Do not tighten up the lock tie more than
necessary.
18 En
<CRD4769-A>18
Black plate (19,1)
Section
Connection 02
English
Connecting a rear view camera Rear view camera
When this product is used with a rear view (ND-BC6)
(sold separately)
camera, it is possible to automatically switch
from the video to rear view image when the
shift lever is moved to REVERSE (R). Camera
View mode also allows you to check what is To video output
behind you while driving.
RCA cable
(supplied with ND-BC6)
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR
This product
IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
! The screen image may appear reversed.
! The rear view camera is used as an aid to
keep an eye on trailers, or backing into a tight Brown (BC IN) Power supply
parking spot. Do not use this function for en-
Power cord
tertainment purposes.
! Objects in rear view may appear closer or
more distant than in reality.
! Please note that the image area shown by the
Violet/white
rear view camera may differ slightly when full- (REVERSE-GEAR SIGNAL
screen images are displayed when backing INPUT)
and when checking the rear of the vehicle
while moving forward.
Notes
! This mode is available when the rear view
camera setting is set to On. (For details,
refer to Operation Manual.)
! Connect this product to the rear view camera
only. Do not connect to any other
equipment.
En 19
<CRD4769-A>19
Black plate (20,1)
Section
02 Connection
Using AV input
You can connect an external video component
or external camera to this product.
Yellow
Red, white (VIDEO INPUT
(AUDIO INPUT) OR CAMERA
INPUT)
Yellow
(VIDEO INPUT
To audio outputs To video output
OR CAMERA
INPUT)
To video output
Note
This mode is available when the setting of AV
input is set to Source. (For details, refer to Op-
External camera eration Manual.)
(sold separately)
Note
This mode is available when the setting of AV
input is set to Camera. (For details, refer to Op-
eration Manual.)
20 En
<CRD4769-A>20
Black plate (21,1)
Section
Connection 02
English
Using an AUX input
CAUTION
This product Be sure to use a mini-jack AV cable (CD-RM10)
(sold separately) for wiring. If you use other
AUX input cables, the wiring position might differ resulting
in disturbed images and sounds.
OK
L: Left audio (White)
L R:
L Right audio (Red)
V: Video (Yellow)
V G R R G V G: Ground
Mini-jack AV cable
(CD-RM10) Mini-jack extension
(sold separately) cable
2 m (6 ft. 7 in.)
RCA cables
(sold separately)
External video
component
(sold separately)
Notes
! This mode is available when the setting of
AUX input is set to On. (For details, refer to
Operation Manual.)
! When connecting an external video compo-
nent using a mini-jack AV cable, use a sepa-
rately sold AUX extension cable as necessary.
En 21
<CRD4769-A>21
Black plate (22,1)
Section
02 Connection
This product
Yellow (V OUT)
Rear audio
output
HDMI port
Notes
When using a rear display
! For details concerning the operations of HDMI
device, refer to Operation Manual.
connected to rear video output
! When you connect the High Speed HDMI WARNING
Cable, use the lock tie to fix it securely. NEVER install the rear display in a location
= For details, refer to Securing the High that enables the driver to watch the video
Speed HDMI Cable on page 18. source while driving.
This products rear video output is for connection
of a display to enable passengers in the rear
seats to watch the video source.
22 En
<CRD4769-A>22
Black plate (23,1)
Section
Installation 03
English
Precautions before ! Do not install this product where it may (i)
obstruct the drivers vision, (ii) impair the
installation performance of any of the vehicles oper-
ating systems or safety features, includ-
CAUTION
ing airbags, hazard lamp buttons or (iii)
! Never install this product in places where,
impair the drivers ability to safely oper-
or in a manner that:
ate the vehicle.
Could injure the driver or passengers if
! Install this product between the drivers
the vehicle stops suddenly.
seat and front passenger seat so that it
May interfere with the drivers opera-
will not be hit by the driver or passenger if
tion of the vehicle, such as on the floor
the vehicle stops quickly.
in front of the drivers seat, or close to
! Never install this product in front of or
the steering wheel or shift lever.
next to the place in the dashboard, door,
! Make sure there is nothing behind the
or pillar from which one of your vehicles
dashboard or paneling when drilling holes
airbags would deploy. Please refer to your
in them. Be careful not to damage fuel
vehicles owners manual for reference to
lines, brake lines, electronic components,
the deployment area of the frontal air-
communication wires or power cables.
bags.
! When using screws, do not allow them to
! Failure to follow all of these precautions
come into contact with any electrical lead.
may result in serious injury or death.
Vibration may damage wires or insulation,
leading to a short circuit or other damage
to the vehicle.
! To ensure proper installation, be sure to To avoid electromagnetic
use the supplied parts in the manner spe- interference
cified. If any parts are not supplied with
In order to prevent interference, set the follow-
this product, use compatible parts in the
ing items as far as possible from this product,
manner specified after you have the parts
other cables or leads:
compatibility checked by your dealer. If
! FM, AM antenna and its lead
parts other than supplied or compatible
! GPS antenna and its lead
ones are used, they may damage internal
In addition, you should lay or route each an-
parts of this product or they may work
tenna lead as far as possible from other anten-
loose and the product may become de-
na leads. Do not bind, lay or route them
tached.
together, or cross them. Electromagnetic
! It is extremely dangerous to allow cables
noise will increase the potential for errors in
to become wound around the steering col-
the vehicles location display.
umn or shift lever. Be sure to install this
product, its cables, and wiring away in
such so that they will not obstruct or hin-
der driving. Before installing
! Make sure that leads cannot get caught in ! Consult with your nearest dealer if installa-
a door or the sliding mechanism of a seat, tion requires drilling holes or other modifi-
resulting in a short circuit. cations of the vehicle.
! Please confirm the proper function of ! Before making a final installation of this
your vehicles other equipment after in- product, temporarily connect the wiring to
stallation of this product. confirm that the connections are correct
and the system works properly.
En 23
<CRD4769-A>23
Black plate (24,1)
Section
03 Installation
30
Installing this product
Installation notes
5 5
! Do not install this product in places subject
to high temperatures or humidity, such as:
Places close to a heater, vent or air con-
ditioner.
Places exposed to direct sunlight, such
as on top of the dashboard.
Places that may be exposed to rain,
! When installing, to ensure proper heat dis-
such as close to the door or on the vehi-
persal when using this unit, make sure you
cles floor.
leave ample space behind the rear panel
! Install this product in an area strong en-
and wrap any loose cables so they are not
ough to bear its weight. Choose a position
blocking the vents.
where this product can be firmly installed,
and install it securely. If this product is not
securely installed, the current location of
the vehicle cannot be displayed correctly.
Leave ample
space 5 cm
5 cm
24 En
<CRD4769-A>24
Black plate (25,1)
Section
Installation 03
English
! The cords must not cover the area shown Installation using the screw
in the figure below. This is necessary to holes on the side of this product
allow the amps and navigation mechanism
to dissipate heat. % Fastening this product to the factory
radio-mounting bracket.
Position this product so that its screw holes
are aligned with the screw holes of the brack-
et, and tighten the screws at three locations
on each side.
Use either the truss head screws (5 mm
8 mm) or flush surface screws (5 mm
9 mm), depending on the shape of the brack-
Do not cover this area. ets screw holes.
! The semiconductor laser will be damaged
if it overheats, so dont install this product
anywhere hot for instance, near a heater
outlet.
Parts supplied
Parts marked (*) are supplied with AVIC-6000-
NEX, AVIC-5000NEX and AVIC-X8610BS.
En 25
<CRD4769-A>25
Black plate (26,1)
Section
03 Installation
Screw (2 mm 4 mm)
26 En
<CRD4769-A>26
Black plate (27,1)
Section
Installation 03
English
Installing the GPS antenna Parts supplied
CAUTION
Do not cut the GPS antenna lead to shorten
it or use an extension to make it longer. Alter-
ing the antenna cable could result in a short
circuit or malfunction and permanent da- GPS antenna Metal sheet
mage to this product.
Installation notes
! The antenna should be installed on a level
surface where radio waves will be blocked
as little as possible. Radio waves cannot be
received by the antenna if reception from
the satellite is blocked.
1 2
1 Dashboard
2 Rear shelf
! When installing the GPS antenna inside
the vehicle, be sure to use the metal sheet
provided with your system. If this is not
used, the reception sensitivity will be poor.
! Do not cut the accessory metal sheet. This
would reduce the sensitivity of the GPS an-
tenna.
! Take care not to pull the antenna lead when
removing the GPS antenna. The magnet at-
tached to the antenna is very powerful, and
the lead may become detached.
! Do not paint the GPS antenna, as this may
affect its performance.
En 27
<CRD4769-A>27
Black plate (28,1)
Section
03 Installation
When installing the antenna inside the vehicle (on the dashboard
or rear shelf)
WARNING
Do not install the GPS antenna over any sen-
sors or vents on the dashboard of the vehicle,
as doing so may interfere with the proper
functioning of such sensors or vents and may
compromise the ability of the metal sheet
under the GPS antenna to properly and se-
curely affix to the dashboard.
1 2
Note
The metal sheet contains a
strong adhesive which may
leave a mark on the surface
if it is removed.
1 GPS antenna
2 Metal sheet Notes
Peel off the protective sheet on the rear. ! When attaching the metal sheet, do not cut
3 Clamps it into small pieces.
Use separately sold clamps to secure the lead ! Some models use window glass that does
where necessary inside the vehicle. not allow signals from GPS satellites to
Affix the metal sheet on the surface as level as pass through. On such models, install the
possible where the GPS antenna faces the GPS antenna on the outside of the vehicle.
window. Place the GPS antenna on the metal
sheet. (The GPS antenna is fastened with its
magnet.)
28 En
<CRD4769-A>28
Black plate (29,1)
Section
Installation 03
English
Installing the microphone 2 Attach the microphone clip to the sun
visor.
! Install the microphone in a place where its
direction and distance from the driver 1
make it easiest to pick up the drivers voice.
! Be sure to turn off (ACC OFF) the product
before connecting the microphone.
Parts supplied
1 Microphone lead
2 Groove
En 29
<CRD4769-A>29
Black plate (30,1)
Section
03 Installation
4
3
1 Microphone
2 Tab
3 Microphone base
4 Microphone clip
30 En
<CRD4769-A>30
Black plate (31,1)
Section
After installation 04
English
After installing this product 5 Drive down an unobstructed road until
the GPS starts receiving the signal nor-
1 Reconnect the negative () terminal of mally.
the vehicles battery.
First, double-check that all connections are Note
correct and that this product is installed cor-
rectly. Reassemble all vehicle components After installing this product, be sure to check at a
that you previously removed. Then reconnect safe place that the vehicle is performing normal-
the negative () cable to the negative () term- ly.
inal of the battery.
En 31
<CRD4769-A>31
Black plate (32,1)
Sommaire
32 Fr
<CRD4769-A>32
Black plate (33,1)
Section
Prcautions 01
Franais
cule. Elle nautorise en aucun cas un rel-
chement de votre attention, de votre
jugement et de votre vigilance pendant la
conduite.
! Nutilisez jamais ce produit pour joindre
des hpitaux, postes de police ou tablisse-
ments similaires en cas durgence. Appelez
le numro durgence appropri.
! Nutilisez pas ce produit, nimporte quelle
application ou la camra de rtrovise en
option (le cas chant) si celui-ci risque
dune faon ou dune autre de dtourner
votre attention. Observez toujours les r-
gles de scurit et respectez toujours les
rglementations de la circulation routire
en vigueur. Si vous prouvez des difficults
utiliser ce produit ou lire lcran, garez
votre vhicule en lieu sr et serrez le frein
main avant deffectuer les rglages nces-
saires.
! Ce manuel explique comment installer ce
produit dans votre vhicule. Le fonctionne-
ment de ce produit est expliqu dans les
manuels spars.
! Ninstallez pas ce produit dans un endroit
o il risque (i) dentraver la visibilit du
conducteur, (ii) daltrer le fonctionnement
de certains systmes de commande des
dispositifs de scurit du vhicule, y
compris les airbags ou les touches de feux
de dtresse, ou (iii) dempcher le conduc-
teur de conduire le vhicule en toute scu-
rit. Dans certains cas, il peut ne pas tre
possible dinstaller ce produit en raison du
type de vhicule ou de la forme de lint-
rieur du vhicule.
! Les icnes de modle illustres dans ce
manuel indiquent que la description sap-
plique aux modles signals par les icnes.
Fr 33
<CRD4769-A>33
Black plate (34,1)
Section
01 Prcautions
34 Fr
<CRD4769-A>34
Black plate (35,1)
Section
Connexion 02
Prcautions prendre avant ! La trajectoire des fils ne doit pas tre ex-
pose des tempratures leves. Si liso-
de brancher le systme lation chauffe, les fils risquent dtre
endommags, ce qui peut entraner un
AVERTISSEMENT
court-circuit ou un dysfonctionnement, et
Nessayez pas de modifier ou dsactiver le
endommager de manire irrmdiable le
systme de verrouillage du frein main, le-
produit.
quel est install pour votre protection. La mo-
Franais
! Ne coupez pas le cble de lantenne GPS
dification ou la dsactivation du systme de
et nutilisez pas de rallonge. Une telle mo-
verrouillage du frein main peut entraner
dification pourrait provoquer un court-cir-
des blessures graves, voire mortelles.
cuit ou un dysfonctionnement.
! Ne raccourcissez aucun fil conducteur.
ATTENTION Vous risqueriez autrement de provoquer
! Si vous dcidez de raliser linstallation un dysfonctionnement du circuit de pro-
vous-mme, et possdez une exprience tection (porte-fusibles, rsistance de fu-
spciale en installation dlectronique au- sible ou filtre, etc.).
tomobile, veuillez suivre attentivement ! Nutilisez jamais le cordon dalimentation
toutes les tapes du manuel dinstalla- de ce produit pour raccorder dautres ap-
tion. pareils lectriques. La capacit du cordon
! Attachez tous les fils avec des colliers ou serait dpasse, ce qui provoquerait une
des serre-cbles. Ne laissez aucun fil nu. surchauffe.
! Ne raccordez pas directement le fil jaune
conducteur de ce produit la batterie du
vhicule. Si ce fil conducteur est directe-
ment raccord la batterie, les vibrations
Avant dinstaller ce produit
du moteur peuvent finir par user les c- ! Utilisez cet appareil uniquement avec une
bles au niveau de la jonction avec lhabita- batterie de 12 V, avec ple ngatif la
cle et provoquer un dfaut disolation. Si masse. Sinon, cela pourrait entraner un in-
lisolation du fil conducteur jaune se d- cendie ou un mauvais fonctionnement.
chire sous leffet du contact avec des pi- ! Afin dviter tout risque de court-circuit, d-
ces mtalliques, il peut en rsulter un branchez le cble de la borne ngative ()
court-circuit extrmement dangereux. de la batterie avant de commencer la pose.
! Il est extrmement dangereux de laisser
les cbles senrouler autour de la colonne
de direction ou du levier de vitesse. Assu-
rez-vous dinstaller ce produit, ses cbles
et les fils de telle faon quils nobstruent
ni ne gnent la conduite.
! Veillez ce que la trajectoire des cbles et
des fils ninterfre pas avec les pices en
mouvement du vhicule. Fixez les cbles
de manire les empcher dtre happs
par, notamment, le volant, le levier de vi-
tesse, le frein main, les glissires de
sige, les portes, ou tout autre lment de
commande du vhicule.
Fr 35
<CRD4769-A>35
Black plate (36,1)
Section
02 Connexion
OF
OF
N
N
comprise entre 4 W et 8 W. Nutilisez pas de
STAR
STAR
haut-parleurs 1 W 3 W avec cet appareil. T T
! Le cble noir est celui de la mise la terre.
Lors de linstallation de cette unit ou de
lamplificateur (vendu sparment), Position ACC Pas de position
ACC
connectez toujours le fil de mise la terre
en premier. Assurez-vous que le fil de
! Pour viter les courts-circuits, recouvrez les
mise la terre est correctement connect
fils dconnects de ruban isolant. Il est par-
aux pices mtalliques du chssis de la
ticulirement important disoler tous les fils
voiture. Le fil de mise la terre de lampli-
conducteurs de haut-parleurs non utiliss
ficateur et celui de cette unit ou de tout
pour viter tout risque de court-circuit.
autre appareil doivent tre connects s-
! Raccordez les connecteurs de mme cou-
parment la voiture avec des vis diff-
leur au port de couleur correspondant,
rentes. Si les vis du fil de mise la terre
cest--dire le connecteur bleu au port bleu,
sont desserres ou tombent, il pourrait en
le noir au noir, etc.
rsulter un incendie ou un dysfonctionne-
! Pour raccorder lamplificateur de puis-
ment.
sance dautres units, veuillez vous repor-
Fil de mise la terre ter au mode demploi concern.
Amplificateur
! Un circuit BPTL unique tant employ, ne
reliez pas directement lextrmit du cble
de haut-parleur * ou ne reliez pas les ex-
*1 trmits des fils conducteurs de haut-par-
leur * ensemble. Veillez relier lextrmit
Autres appareils * du cble de haut-parleur lextrmit *
Pices mtalliques
(Autre appareil
du chssis de
du cble de haut-parleur de ce produit.
lectronique dans
la voiture
la voiture)
*1
Non fourni avec cette unit.
36 Fr
<CRD4769-A>36
Black plate (37,1)
Section
Connexion 02
Franais
ficateur de puissance externe, la prise de
commande de relais de lantenne automa-
tique du vhicule ou au terminal de
commande dalimentation de lamplifica- Ce produit Cordon dalimentation
teur dantenne (max. 300 mA 12 VCC). Le si-
gnal de commande est mis par le biais du
fil bleu/blanc, mme si la source audio est
dsactive.
! Assurez-vous de ne pas utiliser ce fil
comme cble dalimentation pour les am-
plificateurs de puissance externes. Une
telle connexion pourrait causer un appel de
courant excessif et un mauvais fonctionne- Antenne GPS Microphone
ment.
! Assurez-vous de ne pas utiliser ce fil
comme cble dalimentation pour lan-
tenne automatique ou lamplificateur dan-
tenne. Une telle connexion pourrait causer
un appel de courant excessif et un mauvais
fonctionnement.
Rallonge pour cble Cble USB
mini-jack
Attache de blocage*
Fr 37
<CRD4769-A>37
Black plate (38,1)
Section
02 Connexion
Jaune
Vers la borne fournie avec lalimentation
quelle que soit la position du contacteur dallumage.
Rouge
Vers la borne lectrique commande par le
contacteur dallumage (12 VCC) ON/OFF.
Orange/blanc
Vers la borne du contacteur dclairage.
Noir (masse)
Vers la carrosserie (mtal) du vhicule.
Remarque
Lorsquun haut-parleur dextrmes graves
est connect ce produit la place dun
haut-parleur arrire, modifiez la sortie arrire dans
le rglage initial. (Reportez-vous au Manuel de
fonctionnement.) La sortie du haut-parleur Dans un systme deux haut-parleurs, ne
dextrmes graves de ce produit est monoaurale. rien connecter sur les fils de haut-parleur non
raccords aux haut-parleurs.
Blanc Gris
Haut-parleur avant Haut-parleur avant
Blanc/noir Gris/noir
Gauche Droite
Vert Violet
Haut-parleur arrire Haut-parleur arrire
ou haut-parleur ou haut-parleur
dextrmes dextrmes
graves (4 ) Vert/noir Violet/noir graves (4 )
En cas dutilisation dun haut-parleur dextrmesgraves de 70 W (2 ), veiller connecter les fils violet et
violet/noir de ce produit. Ne rien connecter sur les fils vert et vert/noir.
Vert Violet
38 Fr
<CRD4769-A>38
Black plate (39,1)
Section
Connexion 02
Ce produit
14 cm
Franais
Jaune/noir (MUTE)
Si vous utilisez un quipement avec une
fonction silence, connectez cet quipement
sur le fil Audio Mute. Dans le cas contraire,
ne rien connecter sur ce fil.
Alimentation
Fusible (10 A)
Cordon dalimentation
Remarque
La source audio sera coupe ou attnue,
alors que les sons suivants ne seront ni coups
ni attnus. Pour en savoir plus, reportez-vous
au Manuel de fonctionnement.
Guidage vocal de la navigation
La tonalit de sonnerie entrante et la voix
entrante du tlphone portable connect ce
produit via la technologie sans fil Bluetooth
Fr 39
<CRD4769-A>39
Black plate (40,1)
Section
02 Connexion
AVERTISSEMENT
UN RACCORDEMENT INCORRECT PEUT TRE LORIGINE DE DGT OU BLESSURE GRAVE, NOTAMMENT
UNE LECTROCUTION ET UNE INTERFRENCE AVEC LE FONCTIONNEMENT DU SYSTME DE FREINAGE
ANTIBLOCAGE DU VHICULE, DE LA BOTE DE VITESSES AUTOMATIQUE ET DE LAFFICHAGE DU
COMPTEUR DE VITESSE.
ATTENTION
Il est vivement conseill de connecter le fil de vitesse pour une navigation plus prcise et
de meilleurs performances.
Remarque
La position du circuit de dtection de vitesse et la position du contacteur de frein main
varient selon le modle du vhicule. Pour plus de dtails, contactez votre revendeur
Pioneer agr ou un installateur professionnel.
AVERTISSEMENT
LE FIL VERT CLAIR DU CONNECTEUR DALIMENTATION
EST CONU POUR DTECTER LTAT DE
STATIONNEMENT ET DOIT TRE BRANCH CT
ALIMENTATION LECTRIQUE DU CONTACTEUR
DE FREIN MAIN. UNE CONNEXION OU UNE
UTILISATION INAPPROPRIE DE CE FIL PEUT TRE
ILLGALE LGARD DE LA LOI EN VIGUEUR ET
RISQUE DENTRANER DES BLESSURES SRIEUSES OU
DES DOMMAGES.
Ct alimentation
lectrique
Ct terre
Contacteur de frein main
40 Fr
<CRD4769-A>40
Black plate (41,1)
Section
Connexion 02
Ce produit
Franais
Alimentation
Cordon dalimentation
Remarque
Lorsque vous utilisez une camra de rtrovise,
veillez connecter ce fil. Dans le cas contraire,
vous ne pouvez pas afficher limage de la camra
de rtrovise.
Fr 41
<CRD4769-A>41
Black plate (42,1)
Section
02 Connexion
Branchement du systme
Entre dadaptateur iDatalink
Reportez-vous au manuel
dinstructions de ladaptateur
iDatalink
(vendu sparment).
Ce produit
Syntoniseur pour vhicule SiriusXM Connect
Reportez-vous au manuel dinstructions du
syntoniseur pour vhicule SiriusXM Connect
(vendu sparment).
Prise dantenne
4m
Entre de commande distance cble
Reportez-vous au manuel dinstructions
de ladaptateur de commande distance
cble (vendu sparment).
Antenne du vhicule
Antenne GPS
3,55 m
Microphone
AVERTISSEMENT
Pour viter le risque dun accident et une possible infraction aux lois en vigueur,
ce produit ne doit en aucun cas tre utilis alors que le vhicule roule sauf des
fins de navigation. Par ailleurs, les crans arrire ne doivent pas tre placs l o
ils pourraient reprsenter une distraction pour le conducteur.
Dans certains pays, le fait de regarder des images sur un afficheur dans une
voiture est illgal, mme sil sagit dautres personnes que le conducteur. Lorsquil
existe de telles rgles, vous devez vous y conformer et la source vido de ce
produit ne doit pas tre utilise.
42 Fr
<CRD4769-A>42
Black plate (43,1)
Section
Connexion 02
Amplificateur de puissance
(vendu sparment)
Sorties arrire Cbles RCA
(REAR OUTPUT) (vendus sparment)
Amplificateur de puissance
Franais
(vendu sparment)
15 cm
Amplificateur de puissance
(vendu sparment)
Sorties avant
(FRONT OUTPUT)
Ce produit
Alimentation
Blanc, rouge (SWL, SWR)
Cordon dalimentation
Bleu/blanc
Vers la borne de commande du systme
damplificateur de puissance
(300 mA 12 VCC max.).
Haut-parleur avant Haut-parleur arrire Haut-parleur dextrmes graves
Remarques
Vous pouvez modifier la sortie RCA du haut-parleur dextrmes graves en
fonction de votre systme de haut-parleur dextrmes graves. (Reportez-vous au
Manuel de fonctionnement.)
La sortie du haut-parleur dextrmes graves de ce produit est monaurale.
Fr 43
<CRD4769-A>43
Black plate (44,1)
Section
02 Connexion
Port USB 1
Ce produit
Port HDMI
Cble USB
iPhone avec
1,5 m
connecteur Lightning
Cble USB
1,5 m
44 Fr
<CRD4769-A>44
Black plate (45,1)
Section
Connexion 02
Franais
parment, reportez-vous au manuel du cble.
Les cbles suivants sont ncessaires pour la ! Pour en savoir plus sur la connexion, le fonc-
connexion. tionnement et la compatibilit dun iPhone, re-
! Cble dinterface VGA/USB pour iPod / portez-vous au Manuel de fonctionnement.
iPhone (CD-IV202AV) (vendu sparment)
! Cble dinterface USB pour iPod / iPhone
(CD-IU52) (vendu sparment)
Connexion via lentre AUX
! Adaptateur Lightning vers VGA (produits Le cble dinterface USB pour iPod / iPhone
Apple Inc.) (vendu sparment) (CD-IU201V) (vendu sparment) est nces-
saire pour la connexion.
Port USB 1 Ce produit
Port USB 1
Ce produit
Entre RGB
Adaptateur Lightning
vers VGA Cble USB
(produits Apple Inc.) 1,5 m
(vendu sparment)
Remarque
Connectez le cble USB au port USB 1 lors de lu-
tilisation de aha ou Pandora comme source.
Fr 45
<CRD4769-A>45
Black plate (46,1)
Section
02 Connexion
Remarques
! Pour en savoir plus sur la connexion dun pri-
phrique externe laide dun cble vendu s-
parment, reportez-vous au manuel du cble.
Entre RGB
! Pour en savoir plus sur la connexion et le
fonctionnement du priphrique Android, re-
portez-vous au Manuel de fonctionnement.
iPhone avec ! Lorsque vous connectez le cble HDMI
connecteur haute vitesse, utilisez lattache de blocage
30 broches
pour le fixer fermement.
= Pour en savoir plus, reportez-vous la
page 48, Fixation du cble HDMI haute vi-
tesse.
Cble USB
Connexion dun priphrique
1,5 m Android via un port HDMI
Ce produit
46 Fr
<CRD4769-A>46
Black plate (47,1)
Section
Connexion 02
Franais
Ce produit
Cble USB
(fourni avec CD-AH200)
Port USB 2
Cble USB
Adaptateur MHL (fourni avec CD-MU200)
(fourni avec CD-AH200)
Remarque
Pour en savoir plus sur la connexion dun pri-
phrique externe laide dun cble vendu spa-
rment, reportez-vous au manuel du cble.
Fr 47
<CRD4769-A>47
Black plate (48,1)
Section
02 Connexion
1 Crochet
2 Attache de blocage
3 Cble HDMI haute vitesse
p Ne serrez pas lattache de blocage plus que
ncessaire.
48 Fr
<CRD4769-A>48
Black plate (49,1)
Section
Connexion 02
Franais
plac sur la position REVERSE (R). Le mode
Cble RCA
Point de vue de la camra vous permet ga- (fourni avec ND-BC6)
lement de vrifier ce quil y a derrire le vhi-
cule quand vous conduisez.
Ce produit
AVERTISSEMENT
UTILISEZ LENTRE UNIQUEMENT POUR LA
MARCHE ARRIRE OU LIMAGE INVERSE DE
LA CAMRA DE RTROVISE. TOUTE AUTRE
UTILISATION PEUT ENTRANER DES BLESSU-
RES CORPORELLES OU UNE DTRIORATION
Marron (BC IN)
DE LAPPAREIL.
Alimentation
Fr 49
<CRD4769-A>49
Black plate (50,1)
Section
02 Connexion
Utilisation de lentre AV
Vous pouvez connecter un lment vido ex-
terne ou une camra externe ce produit.
Ce produit
15 cm
23 cm
Jaune
Rouge, blanc (VIDEO INPUT
(AUDIO INPUT) OR CAMERA
INPUT)
15 cm Cbles RCA
(vendu
sparment)
Jaune
(VIDEO INPUT OR Vers les sorties Vers la sortie
CAMERA INPUT) audio vido
Cble RCA
lment vido externe
(vendu sparment)
(vendu sparment)
Remarque
Ce mode est disponible lorsque le rglage de len-
tre AV est dfini sur Camra. (Pour en savoir
plus, reportez-vous au Manuel de fonctionne-
ment.)
50 Fr
<CRD4769-A>50
Black plate (51,1)
Section
Connexion 02
Franais
OK
L: Audio gauche (blanc)
L R:
L Audio droite (rouge)
V: Vido (jaune)
Cble AV mini-jack V G R R G V G: Masse
(CD-RM10) (vendu Rallonge pour cble
sparment) mini-jack
2m
Rouge, blanc
Jaune
Cbles RCA
(vendu
sparment)
Remarques
! Ce mode est disponible lorsque le rglage de
lentre AUX est dfini sur Marche. (Pour en
savoir plus, reportez-vous au Manuel de fonc-
tionnement.)
! Lors de la connexion dun lment vido ex-
terne laide dun cble AV mini-jack, utilisez
un cble dextension AUX vendu sparment
si ncessaire.
Fr 51
<CRD4769-A>51
Black plate (52,1)
Section
02 Connexion
Ce produit
Jaune (V OUT)
Port HDMI
Cble connecteur
mini-prise (vendu Cble RCA
sparment) (vendu
Cble HDMI haute sparment)
vitesse (vendu
sparment)
Vers les entres Vers la entre
audio vido
Remarques
Utilisation dun cran arrire
! Pour en savoir plus sur le fonctionnement du
priphrique HDMI, reportez-vous au Manuel
raccord la sortie vido arrire
de fonctionnement. AVERTISSEMENT
! Lorsque vous connectez le cble HDMI NE JAMAIS installer lcran arrire dans un
haute vitesse, utilisez lattache de blocage endroit permettant au conducteur de regar-
pour le fixer fermement. der la source vido en conduisant.
= Pour en savoir plus, reportez-vous la La sortie vido arrire de ce produit permet de
page 48, Fixation du cble HDMI haute connecter un afficheur permettant aux passagers
vitesse. occupant les siges arrire de visionner la source
vido.
52 Fr
<CRD4769-A>52
Black plate (53,1)
Section
Installation 03
Franais
conducteur, (ii) daltrer le fonctionne-
passagers en cas darrt brusque.
ment de certains systmes de commande
puisse interfrer avec les commandes
ou dispositifs de scurit, y compris les
de manuvre du conducteur tel que
airbags ou les touches de commande des
sur le plancher, en face du sige
feux de dtresse, ou (iii) dempcher le
conducteur, ou proximit du volant
conducteur de conduire le vhicule en
ou du levier de vitesse.
toute scurit.
! Assurez-vous que rien ne se trouve der-
! Installez ce produit entre le sige conduc-
rire le tableau de bord ou une cloison
teur et le sige passager avant afin quil
avant dy percer des trous. Veillez ne pas
ne puisse pas tre percut par le conduc-
endommager les tubulures de carburant
teur ou le passager avant en cas de frei-
et de frein, les composants lectroniques,
nage brusque.
les cbles de communication ou dalimen-
! Ninstallez jamais ce produit devant ou
tation.
ct dun endroit sur le tableau de bord,
! Si vous utilisez des vis, veillez ce quel-
une portire ou un pilier, partir duquel
les nentrent pas en contact avec un fil
un des airbags du vhicule doit se d-
conducteur lectrique. Les vibrations peu-
ployer. Veuillez vous reporter au mode
vent endommager les fils ou lisolation, en
demploi du vhicule pour en savoir plus
entranant un court-circuit ou dautres
sur les zones de dploiement des airbags
dommages sur le vhicule.
frontaux.
! Pour garantir une installation correcte, as-
! Des blessures graves voire mortelles peu-
surez-vous dutiliser les pices fournies de
vent dcouler du non-respect de ces pr-
la faon spcifie. Si certaines pices ne
cautions.
sont pas fournies avec cet appareil, utili-
sez des pices compatibles de la faon
spcifie aprs avoir fait vrifier la compa-
tibilit par votre revendeur. Si dautres Pour viter les parasites
pices que les pices fournies ou compati- lectromagntiques
bles sont utilises, elles peuvent endom-
Pour viter toute interfrence, placez les l-
mager les pices internes de ce produit ou
ments suivants le plus loin possible de ce pro-
tre mal assujetties, et le produit peut se
duit, dautres cbles ou de fils conducteurs :
dtacher.
! Antenne FM, AM et son fil conducteur
! Il est extrmement dangereux de laisser
! Antenne GPS et son fil conducteur
les cbles senrouler autour de la colonne
De plus, vous devez placer ou acheminer le fil
de direction ou du levier de vitesse. Assu-
dantenne aussi loin que possible des autres
rez-vous dinstaller ce produit, ses cbles
fils dantenne. Ne les attachez, ne les placez
et les fils de telle faon quils nobstruent
ou ne les acheminez pas ensemble, ni ne les
ni ne gnent la conduite.
croisez. Le bruit lectromagntique augmente-
! Assurez-vous quaucun fil conducteur ne
ra les risques derreurs daffichage de lempla-
puisse se coincer dans une porte ou le m-
cement du vhicule.
Fr 53
<CRD4769-A>53
Black plate (54,1)
Section
03 Installation
54 Fr
<CRD4769-A>54
Black plate (55,1)
Section
Installation 03
! Les cbles ne doivent pas traverser la zone Installation en utilisant les trous
indique dans la figure ci-dessous, afin que de vis sur les cts de ce produit
la chaleur dgage par les amplificateurs
et le mcanisme de navigation puisse se % Fixez ce produit au support de montage
dissiper librement. radio dusine.
Positionnez ce produit de sorte que les trous
des vis soient aligns avec ceux du support,
Franais
puis serrez les vis aux trois emplacements de
chaque ct.
Utilisez les vis tte bombe (5 mm 8 mm)
ou les vis tte plate (5 mm 9 mm), en fonc-
tion de la forme des trous de vis du support.
Pices fournies
Les parties marques dun astrisque (*) sont
fournies avec AVIC-6000NEX, AVIC-5000NEX et Si le cliquet interfre avec linstallation,
AVIC-X8610BS. vous pouvez le replier compltement vers
le bas.
1
2
Vis tte plate Vis*
1 Support de montage radio dusine
(5 mm 9 mm) (2 mm 4 mm)
(6 pices) (1 pice) 2 Tableau de bord ou console
3 Vis tte bombe ou vis tte plate
Veillez utiliser les vis fournies avec ce pro-
duit.
Fr 55
<CRD4769-A>55
Black plate (56,1)
Section
03 Installation
Vis (2 mm 4 mm)
56 Fr
<CRD4769-A>56
Black plate (57,1)
Section
Installation 03
Franais
circuit ou un dysfonctionnement et dendom-
mager de manire irrmdiable ce produit.
1 2
1 Tableau de bord
2 Lunette arrire
! Si vous installez lantenne GPS lintrieur
du vhicule, utilisez la plaque mtallique
fournie avec le systme. La sensibilit de
rception sera faible si elle nest pas utili-
se.
! Ne coupez pas la plaque mtallique, car la
sensibilit de lantenne GPS en serait r-
duite.
! Ne tirez pas le fil pour retirer lantenne
GPS. Celle-ci est fixe laide dun aimant
trs puissant. Vous risqueriez darracher le
fil.
! Aucune peinture ne doit tre applique sur
lantenne GPS afin de ne pas rduire ses
performances.
Fr 57
<CRD4769-A>57
Black plate (58,1)
Section
03 Installation
Remarque
La plaque mtallique est
pourvue dune bande
adhsive rsistante,
susceptible de laisser une
marque sur la surface
lorsquelle est retire.
1 Antenne GPS
2 Plaque mtallique Remarques
Dcollez la pellicule protectrice larrire. ! Lors de la fixation de la plaque mtallique,
3 Serre-fils ne la coupez pas en petits morceaux.
Utilisez des serre-fils vendus sparment pour ! Les vitres de certains modles de vhicules
fixer le fil conducteur aux endroits ncessaires ne laissent pas passer les signaux des sa-
dans le vhicule. tellites GPS. Dans ce cas, installez lan-
Fixez la plaque mtallique sur une surface tenne GPS lextrieur du vhicule.
aussi plate que possible situe de manire
ce que lantenne GPS soit oriente vers une
vitre. Posez lantenne GPS sur la plaque mtal-
lique. (Lantenne GPS est immobilise par son
propre aimant.)
58 Fr
<CRD4769-A>58
Black plate (59,1)
Section
Installation 03
Franais
Pices fournies
1 Fil du microphone
2 Fente
Fr 59
<CRD4769-A>59
Black plate (60,1)
Section
03 Installation
60 Fr
<CRD4769-A>60
Black plate (61,1)
Section
Aprs linstallation 04
Aprs avoir install ce produit 5 Roulez sur une route sans obstacle jus-
qu ce que le GPS commence recevoir le
1 Raccordez nouveau la borne ngative signal normalement.
() de la batterie du vhicule.
Vrifiez une nouvelle fois que toutes les conne- Remarque
xions ont t bien faites et que ce produit est
correctement install. Remettez en place les Une fois linstallation termine, vrifiez le bon
fonctionnement du vhicule dans un endroit
Franais
lments dmonts du vhicule, puis rebran-
chez le cble ngatif () sur la borne ngative scuris.
() de la batterie.
Fr 61
<CRD4769-A>61
Black plate (62,1)
62 Fr
<CRD4769-A>62
Black plate (63,1)
Franais
Fr 63
<CRD4769-A>63
Black plate (64,1)
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
<KMZZ13L> <CRD4769-A> UC
<CRD4769-A>64