Professional Documents
Culture Documents
ABSTRACT ISO 9000 has become a favoured system for many organizations embarking on quality
improvement. ISO 9001 : 2000 is an information-sharing tool that an organization can use to gain
the knowledge needed to enhance quality and performance. It also provides a ready framework
for ordering and structuring an organizations knowledge. Knowledge creation focuses on
generating new knowledge, and knowledge can be re-used and new knowledge can be integrated
with current knowledge to develop even more valuable knowledge to improve performance. In
this paper, we illustrate a knowledge creation model for ISO 9001 : 2000. It is a comprehensive
framework for researchers to conduct case studies to explore the knowledge management
activities in ISO 9001 : 2000. In addition, we explore the knowledge creation opportunity within
ISO 9001 : 2000 and discuss the knowledge created within ISO 9001 : 2000. This architecture
offers an initial model for organizations that want to facilitate their knowledge flows in ISO
9001 : 2000 and further proceed with their knowledge management systems in ISO 9001 : 2000 in
practical applications.
KEY WORDS : ISO 9001 : 2000, knowledge creation model, knowledge creation opportunity
Introduction
ISO 9000 has become a favoured system for many organizations embarking on quality
improvement (Coleman & Douglas, 2003). Its effects on product quality and sales compe-
titiveness may be clearer after achieving certification (Huarng & Lin, 1996). On the other
hand, integration into global production systems requires that organizations meet the
standards of industrial certification (for example, ISO 9000). Presently, not having ISO
certification is increasingly becoming a barrier to entry into the global marketplace
(Mittelstaedt et al., 2003). The new ISO 9001 : 2000 was developed to assist organizations
with implementing and operating effective quality management system. It aims at
Correspondence Address: Chinho Lin, Department of Industrial and Information Management, College of
Management, National Cheng Kung University, No.1, Ta-Hsueh Road, Tainan 701, Taiwan, Republic of
China. Email: linn@mail.ncku.edu.tw
customer satisfaction (customer focus) and places emphasis on process and continual
improvement (Russell, 2000). In terms of customer focus, the most widely used and
most valuable practices focus on developing the organizations customer knowledge
(Kuratko et al., 2001). In the mean time, organizations that effectively implement ISO
9000 have developed a documentation system that allows for sorting and selecting infor-
mation (Zuckerman, 2000). Documentation is important because it is a key manifestation
of knowledge (Heng, 2001). This paper aims at investigating how and where the knowl-
edge can be created within ISO 9001 : 2000. The paper is organized as follows. First, we
integrate the ISO 9001 : 2000 quality system clauses into a process model to explore
knowledge creation opportunities within ISO 9000 : 2000; then a knowledge creation
model for ISO 9001 : 2000 is proposed; and finally we discuss the knowledge created
within ISO 9001 : 2000.
The organizational culture is the carrier of tacit knowledge in the organization (Tucker
et al., 1996), and cultures with a quality of care facilitate organizational members com-
munication and sharing of knowledge (Von Krogh, 1998).
The second element of the knowledge-creating process is ba, which is a place where
information is interpreted to become knowledge. Knowledge is created through the inter-
actions among individuals or between individuals and their environments, rather than by
an individual operating alone. B is the context shared by those who interact with each
other, and through such interactions, those who participate in ba and the context itself
evolve through self-transcendence to create knowledge. Ba does not necessarily mean a
physical space. It is a concept that unifies physical space such as an office space, virtual
space such as e-mail, and mental space such as shared ideals.
There are four types of ba. Originating ba is defined by individual and face-to-face
interaction. It is a place where individuals share experiences, feeling, emotion and mental
modes. It mainly offers a context for socialization. Dialoguing ba is defined by collective
and face-to-face interaction. It is the place where individuals mental modes and skills are
shared, converted into common terms, and articulated as concepts. Dialoguing ba mainly
offers a context for externalization. Systemizing ba is defined by collective and virtual
interactions. Systemizing ba mainly offers a context for the combination of existing expli-
cit knowledge, as explicit knowledge can be relatively easily transmitted to a large number
of people in written form. Exercising ba is defined by individual and virtual interactions.
It mainly offers a context for internalization. Exercising ba synthesizes the transcendence
and reflection through action, while dialoguing ba achieves this through thought.
The third element of the knowledge-creating process is knowledge assets. Knowledge
assets are the inputs, outputs and moderating factors of the knowledge-creating process.
There are four types of knowledge assets.
Experiential knowledge assets consist of the shared tacit knowledge, such as skills and
know-how that are built through shared hands-on experience among the members of the
organization, and between the members of the organization and its customers, suppliers
and affiliated firms. Conceptual knowledge assets consist of explicit knowledge, such
as concepts or designs articulated through images, symbols and language. They are the
assets based on the concepts held by customers and members of the organization. Sys-
temic knowledge assets consist of systematized and packaged explicit knowledge, such
as explicitly stated technologies, product specification, manuals and documented and
packaged information about customers and suppliers. Routine knowledge assets
consist of the tacit knowledge, such as know-how, organizational culture and organiz-
ational routines for carrying out the day-to-day business of the organization that is routi-
nized and embedded in the actions and practices.
Thus, in order to fashion knowledge creation within an organization, top and middle
management should provide the knowledge vision, develop and promote sharing of
knowledge assets, create and energize ba, and enable and promote the continuous spiral
of knowledge creation.
required to do more than just manual one task jobs. They are required to do knowledge
work (Lim et al., 1999).
According to ISO 9001 : 2000 (ISO, 2000), records, which only produce data, should
be established and maintained within ISO 9001 : 2000 activities. These are unstructured
streams of numbers or characters that only have relevance when viewed within a specific
context. This can be achieved through analysis such as by converting the data into infor-
mation (Beckett et al., 2000). ISO 9000 is a documentation-based communication tool.
When all employees document their work procedures and analyse their organizational
operations, they are more prepared to gather, sort, and cull information from all the
processes within their organization. Thus, in the long run, sharing information within
the organization is at the heart of the ISO 9000 implemented processes (Zuckerman,
2000).
When quality information is used to make decision to solve problems for promoting a
continuous and consistent improvement in quality, it can be converted into knowledgeable
quality information (Lim et al., 1999). Through the dynamic knowledge-creating process,
knowledgeable quality information becomes knowledge when it is interpreted by individ-
uals, given a context, and anchored within the beliefs and commitments of individuals. In
addition, knowledge creation focuses on generating a new knowledge (Bajaria, 2000) and
continuous improvement (Abraham & Knight, 2001) that will trigger improvement oppor-
tunities within ISO 9001 : 2000. Therefore, instead of merely solving current problems,
organizations can create and define problems (improvement opportunities) that can be
solved by developing and applying new knowledge (Nonaka et al., 2000).
1 Management review input Combination Management review Systemizing Management review output Systemic
2 Manuals and documented Internalization Training programs Exercising Technical or process Routine
procedures know-how
3 Product information and Socialization Communication with Originating Product preference Experiential
enquiries customers
4 Customer requirements Externalization Contract review Dialoguing Contract review records Conceptual
related to the product
Concept creation Externalization Design and development Dialoguing Planning output Conceptual
665
6 Customer perception Externalization Obtain and analyze Dialoguing Customer satisfaction Conceptual
customer perception reports
666 C. Lin and C. Wu
Management Responsibility
Top management can use management review as systemizing ba. In such activity, partici-
pants can interact with each other collectively and virtually for reviewing the organiz-
ations quality management system. Here, explicit knowledge in the form of review
input such as results of audits, customer feedback, and product conformity, is combined,
edited or processed to form synthetic knowledge in the form of review output, such as
improvement of the effectiveness of the quality management system and improvement
of product related to customer requirements.
Resource Management
The organization can use training programmes as exercising ba (Nonaka et al., 2000).
Here, personnel performing work that affects product quality can enrich their tacit knowl-
edge base, such as technical or process-approach know-how, by embodying explicit
knowledge written in documents such as manuals about their jobs or documented
procedures about the processes.
Product/Service Realization
First, in customer-related processes, the organization can use contracts review as dialo-
guing ba. Such activity is able to facilitate creative and essential dialogue about customer
requirements related to the product among participants. Here, tacit knowledge about
requirements specified by the customer is made explicit in the form of contract review
records, such as a definition of product requirements and actions arising from the review.
Second, in design and development processes, if the design responsibility is necessary,
the organization can first use design and development planning as dialoguing ba. Such
activity is able to facilitate creative and essential dialogue about concept creation of
new product among participants (Nonaka et al., 2000). Here, tacit knowledge about
concept creation of new product is made explicit in the form of planning output, including
the determination of stages, responsibilities, and authorities related to design and develop-
ment. After that, the organization can use review, verification, and validation of design and
development as systemizing ba. In such activity, participants can interact with each other
collectively and virtually for reviewing, verifying and validating in accordance with
planned arrangements. Here, explicit knowledge in the form of design and development
input such as functional and performance requirements is combined, edited or processed
to form synthetic knowledge in the form of review output, such as product acceptance
criteria and the characteristics of the product that are essential for its safe and proper use.
Third, in the purchasing process, the organization can first use evaluation of suppliers as
dialoguing ba. Such activity is able to facilitate creative and essential dialogue about the
A Knowledge Creation Model for ISO 9001 : 2000 667
type and extent of control applied to the suppliers among participants. Here, tacit knowl-
edge about suppliers ability is made explicit in the form of records of the results of evalu-
ation such as criteria for selection and evaluation. After that, the organization can use
purchasing documents review as systemizing ba. In such activity, participants can interact
with each other collectively and virtually for ensuring the conformation of purchased
product. Here, explicit knowledge in the form of purchasing documents, including require-
ments for approval of product and qualification of personnel is combined, edited or pro-
cessed to form synthetic knowledge in the form of results of the review purchasing
documents, such as the adequacy of specified purchase requirements.
Fourth, in production and service provision process, the organization can use production
and service provision planning as systemizing ba. In such activity, participants can interact
with each other collectively and virtually for production and service provision under con-
trolled conditions. Here, explicit knowledge in the form of design and development output
(design responsibility) or in the form of contract review records (production responsibil-
ity) is combined, edited or processed to form synthetic knowledge in the form of a product
realization plan, such as the availability of work instructions and the use of suitable
equipment.
Finally, in the process of measuring device control, the organization shall calibrate
devices at specified intervals. This activity can be used as exercising ba. Here, personnel
who conduct calibration can embody explicit knowledge written in documents, such as
acceptance criteria for calibration, to enrich their tacit knowledge base such as calibrating
skill.
Customer Perception
The organization shall obtain and analyse information of customer perception. This
activity can be used as dialoguing ba. Such activity is able to facilitate creative and essen-
tial dialogue about customer satisfaction among participants. Here, tacit knowledge about
668 C. Lin and C. Wu
customer perception, such as the difference between customer expectations and perception
is made explicit in the form of reports of customer satisfaction, such as product confor-
mity, delivery and after-sales service.
From the above discussion, we can conclude that the organization shall first communi-
cate with customers. At this originating ba, participants are able to accumulate tacit knowl-
edge about customer requirements through face-to-face interactions with customers.
Long-term experiences in communicating with customers give participants unique knowl-
edge of product preference, including customer requirements not stated by the customer
but necessary for specified or intended use. Second, the organization shall conduct con-
tract review as well as design and development planning. In this dialoguing ba, tacit
knowledge about the customer requirements is then converted into explicit knowledge
in the form of product-related knowledge that can be used for purchasing, production
and service provision activities. In the meantime, monitoring of customer perception
and evaluation of suppliers can promote the use of the above-mentioned dialoguing ba.
Since ISO 9000 demands clear identification of customer requirements, achieving this
means more contact with the customer, thus more feedback (Mcadam, 2001).
Third, the organization can use a series of activities including review, verification and
validation of design and development, purchasing documents review, product realization
planning, corrective and preventive action review, and management review as systemizing
ba. In these activities, product-related knowledge built in dialoguing ba can be converted
into more complex and systematic sets of explicit knowledge through the way that person-
nel involve, in documenting their work, procedures or technical manuals. Finally, the
organization uses training programmes, calibration of measuring devices, and internal
audits as exercising ba. In this ba, personnel can enrich their tacit knowledge through
the knowledge created at the above-mentioned systemizing ba. The critical element to
transfer the intangible or tacit knowledge asset towards value-added process is the
human resources residing in the organization (Heng, 2001). The gap that exists between
the necessary competence for personnel and their competence on hand then triggers a
new cycle of knowledge creation with the aim of identifying core competence in an
organization, since core competence can make a significant contribution to the perceived
customer benefits of the end product (Hax & Majluf, 1996).
Apart from that, knowledge assets largely make up the gap between market value and
book value of an organization (Talisayon, 2003). Varying the specific knowledge assets
within categories and allocations across categories affects an organizations performance
(Holsapple & Joshi, 2001). The knowledge created within ISO 9001 : 2000 can be categor-
ized into four types of knowledge assets as Nonaka et al. (2000) have proposed. First, the
knowledge creation opportunity, which requires record-keeping activity, will always
create a systemic knowledge asset. This kind of knowledge is the greatest part of the
knowledge assets within ISO 9001 : 2000; for example, management review, review, ver-
ification and validation of design and development. Secondly, conceptual knowledge
assets are created through interacting with the customers or suppliers, for example, con-
tract review, design and development planning about concept creation from customers,
evaluation of suppliers, and monitoring of customer perception. Thirdly, experimental
knowledge assets are created when learn by doing triggers the knowledge to become a
part of individuals tacit knowledge base, for example, internal audit, calibration of
measuring devices, and communication with customers. Finally, routine knowledge
assets are created, when the tacit knowledge such as customer perception or technical
A Knowledge Creation Model for ISO 9001 : 2000 669
know-how is routinized and embedded in the actions and practices for carrying out day-to-
day quality management system by way of training programmes.
Conclusion
Since the publication of the ISO 9000 series in 1987, organizations in the manufacturing
sector as well as in service sector began to build their quality management systems and
tried to be registered in the directories of registered suppliers. To date over 330,000
series certificates have been awarded in nearly 150 countries worldwide (Stevenson &
Barnes, 2001). The increase of popularity of the standard may mean that the certification
will no longer provide a competitive advantage, but rather a means of survival (Poksinska
et al., 2002). Thus, an organization as a community of practice shall develop processes and
procedures to add value to inputs by transforming them into products, services and infor-
mation that are of particular benefit to its customers. In the meantime, in order to sustain
competitive advantage, it is the capability that is developed from knowledge and
especially context specific tacit knowledge that is embedded in complex organizational
routines and developed from experience that tends to be unique and difficult to imitate
(Sharkie, 2003). An ISO 9000 quality management system would shape the context of
its work as well as the work behaviours of its human resources. It also provides a ready
framework for ordering and structuring an organizations knowledge (Heng, 2001).
Knowledge creation focuses on generating new knowledge, whereas knowledge man-
agement emphasizes efficiency in using what we know. Success depends on the effective
pairing of knowledge creation and knowledge management (Bajaria, 2000). In this paper,
we illustrate a knowledge creation model for ISO 9001 : 2000. It is a comprehensive fra-
mework for researchers to conduct case studies to explore the knowledge management
activities in ISO 9001 : 2000.
In practical application, we explore the knowledge creation opportunities within ISO
9001 : 2000 and discuss the knowledge created within ISO 9001 : 2000. This architecture
offers an initial model for organizations that want to facilitate their knowledge flows in
ISO 9001 : 2000 and to further proceed with their knowledge management systems in
ISO 9001 : 2000.
References
Abraham, J. L. & Knight, D. J. (2001) Strategic innovation: leveraging creation action for more profitable growth,
Strategy & Leadership, 29, pp. 21 26.
Athaide, G. A., Meyers, P. W. & Wilemon, D. L. (1996) Sellerbuyer interactions during the commercialization
of technological process innovations, The Journal of Product Innovation Management, 13, pp. 406422.
Bajaria, H. J. (2000) Knowledge creation and management: inseparable twins, Total Quality Management, 11,
pp. 562 573.
Beckett, A. J., Wainwright, C. E. R. & Bance, D. (2000) Implementing an industrial continuous improvement
system: a knowledge management case study, Industrial management & Data System, 100, pp. 330 338.
Bhatt, G. D. (2001) Knowledge management in organizations: examining the interaction between technologies,
techniques, and people, Journal of knowledge management, 5, pp. 6875.
Coleman, S. & Douglas, A. (2003) Where next for ISO 9000 companies?, The TQM Magazine, 15, pp. 8892.
De Lange-ros, E. & Boer, H. (2001) Theory and practice of continuous improvement in shop-floor teams, Inter-
national Journal of Technology Management, 22, pp. 344 358.
Emig, J. (1983) The Web of Meaning (Upper Monclair, NJ: Boyton/Cook).
670 C. Lin and C. Wu
Gordon, G. L., Kaminski, P. F., Calanton, R. J. & Di Benedetto, C. A. (1993) Linking customer knowledge with
successful service innovation, Journal of Applied Business Research, 9, pp. 129139.
Hax, A. C. & Majluf, N. S. (1996) The Strategy Concept and Process (Prentice-Hall).
Heng, M. S. H. (2001) Mapping intellectual capital in a small manufacturing enterprise, Journal of Intellectual
Capital, 2, pp. 5360.
Holsapple, C. W. & Luo, W. (1996) A framework for studying computer support of organizational infrastructure,
Information and Management, 31, pp. 1324.
Holsapple, C. W. & Joshi, K. D. (2001) Organization knowledge resources, Decision Support System, 31,
pp. 39 54.
Huarng, S. L. & Lin, B. F. (1996) ISO in Taiwan: a survey, Total Quality Management, 7, pp. 681690.
ISO (2000) ISO 9001 : 2000 Quality Management Systems Requirements (ISO).
Jackson, B. (1985) Build customer relationships that last, Harvard Business Review, November December,
pp. 120 128.
Kanji, G. K. (1998) An innovative approach to make ISO 9000 standards more effective, Total Quality Manage-
ment, 9, pp. 6778.
Kuratko, D. F, Goodale, J. C. & Hornsby, J. S. (2001) Quality practices for a competitive advantage in smaller
firms, Journal of Small Business Management, 39, pp. 293 311.
Lim, K. K., Ahmed, P. K. & Zairi, M. (1999) Managing for quality through knowledge management, Total
Quality Management, 10, pp. 615 621.
Marakas, G. M. (1999) Decision Support Systems in the Twenty-first Century (Englewood Cliffs, NJ: Prentice-
Hall).
Mcadam, R. (2001) ISO in the service sector: perceptions of small professional firms, Managing Service Quality,
11, pp. 8092.
Mentzas, G., Apostolou, D., Young, R. & Abecker, A. (2001) Knowledge networking: a holistic solution for
leveraging corporate knowledge, Journal of Knowledge Management, 5, pp. 94.
Mittelstaedt, J. D., Harben, G. N. & Ward, W. A. (2003) How small is too small? Firm size as a barrier to export-
ing from the United States?, Journal of Small Business Management, 41, pp. 68 84.
Nonaka, I., Toyama, R. & Konno, N. (2000) SECI, ba and leadership: a unified model of dynamic knowledge
creation, Long Rang Planning, 33, pp. 5 34.
Parasuraman, A., Zeithaml, V. A. & Berry, L. L. (1985) A conceptual model of service quality and its impli-
cations for future research, Journal of Marketing, 49, pp. 4150.
Poksinska, B., Dahlgaad, J. J. & Antoni, M. (2002) The state of ISO 9000 certification: a study of Swedish organ-
izations, The TQM Magazine, 14, pp. 297 306.
Russell, S. (2000) ISO 9000 : 2000 and the EFQM excellence model: competition or co-operation?, Total Quality
Management, 11, pp. 657 665.
Sharkie, R. (2003) Knowledge creation and its place in the development of sustainable competitive advantage,
Journal of Knowledge Management, 7, pp. 2031.
Stevenson, T. H. & Barnes, F. C. (2001) Fourteen years of ISO 9000: impact, criticisms, costs and benefits,
Business Horizons, 44, pp. 45.
Talisayon, S. D. (2003) Knowledge and people, BusinessWorld, 11 February, pp. 1 2.
Tucker, M. L., Meyer, G. D. & Westerman, J. W. (1996) Organizational communication: development of internal
strategic competitive advantage, The Journal of Business Communication, 33, pp. 51 70.
Tyson, S. (1999) How HR knowledge contributes to organizational performance, Human Resource management
Journal, 9, pp. 4252.
Von Krogh, G. V. (1998) Care in knowledge creation, California Management Review, 40, pp. 133153.
Warkentin, M., Sugumaran, V. & Bapna, R. (2001) E-knowledge networks for inter-organizational collaborative
e-business, Logistic Information Management, 14, pp. 149162.
Zuckerman, A. (2000) Gaining added value from the year 2000 ISO 9000 revisions, World Trade, 13, pp. 6062.