Professional Documents
Culture Documents
Pre-grinding of clinker
Finish grinding of
Coal
Raw materials
Cement
Slag
Roller Mill:
Definition:
A roller mill is characterised in that a bed of loosely
packed material is compacted and thereby ground
between two rolling surfaces pressed against each
other, and that at least one of the rolling surfaces is a
roller.
The gap between the rolling surfaces is not fixed but
varies with change in the material properties.
Evaluation and calculations are
based on
Theoretical considerations
1 1
= 1 + 2 = L +
R1 R2
Illustration of the gripping angle and the nip angle .
Specific grinding pressure kT
R: roller radius
D: roller diameter
W: roller width
T: roller force
T
kT = (kN/m )
2
W D1
Roller press
N = i T v = i k T D R W D M n 60
For the standard Atox mills i=3, DR=0.6*D0, W=0.2*D0,
DM=0.8*D0 and n=56*D00.5, which inserted gives:
N = 0.844 k T D O2.5
Friction coefficient
Polysius
Slip between roller and table
MPS RM
Slip between roller and table
Loesche ATOX
Wear profiles in an Atox Mill hard, dry material
Max. wear