Professional Documents
Culture Documents
10.04.12
User manual for Aveva Review
The file used for Review will be uploaded as a zip file on share point every night. Location
Viewer 3D for each project.
o Open the zip file and download the file on your computer. (Remember were you are
storing it) Double Click the file too start up the session.
o Double click the Icon and the program will open. Go to File and choose open,
navigate then to the place were the Review file is stored. The view on the screen will
hopefully be like this.
Adding the most important windows.
If they are not placed in the left corner, move it. This can be done in several ways all after what
the user think is best.
o Sites
o Zones
o SFI and systems
o Drawings on Sharepoint which is useful. Hull unit and 3D Site plan, 209-001 and 101-026
or similar.
Other windows that can be useful are Clip Volumes and Clip Panes
Different menus
o Explorer, Stand on top mark this:/* right Click 3D view and left Click on Add (All
that are stored on the file will appear on the screen)
o One or several Sites: Mark the sites or the units (Turning blue) right Click 3D view
and left Click on Add. The chosen ones will now appear on the screen.
o Explorer, Stand on top mark this:/* right Click 3D view and left Click on Remove
All that was showing on the screen will disappear, and new items can be loaded into the
screen.
How to Navigate:
o Use the same buttons as above, useful to rotate the model around a Equipment,
valve etc.
o Use the same buttons as above, this has the same funcionality as the first but this
can also go both horizontal and vertical at the same time.
o Right click on the mouse move the cursor to 3D view Choose one of the options
below Change Material.
o Change material, her its possible to change the color of the object that is chosen.
o
o Information like this will come for a pipe.
/4006-814-001-P-112.
o
o How to use Clip volumes.
To get the meaasure of a single object, radius of a flange, pipe, stiffener etc.
Delete one measurement, (Tools Dimension Delet all dimenisons) Deleting all.
When this is used we are also getting the 3 axis into the measuring. This is very
useful.
o There are 2 different ways to set the graphical selection, Normal will select exactly the
part of the equipment you click on.
o Pick significant element will select the whole equipment.
How to get name/identification on pipelines / components etc.
Right click the tree in the explorer, on top level or the zone you want info about and choose Copy
Right click in the window below and press Paste
Password = REVIEW