Professional Documents
Culture Documents
SUDEEPMISHRA
BHUBANESWAR,ODISHA-751024, INDIA
sudeep9666@gmail.com
+91 9533883151
+91 9444427203
CAREER OBJECTIVE
Looking for a rewarding and challenging career in Mechanical Engineering field where I can utilize
my technical knowledge and skills in the day to day production processes and do my bit in increasing
the companys operational efficiency.
PROFESSIONAL EXPERIENCE
Client : HEISCO
Client : KAZSTROYSERVICE
Client : KAZSTROYSERVICE
Responsibilities:
Checking of below mentioned Engineering deliverable activities per discipline for the project
as per Client Standards
Piping GAD.
Pipe Spool Isometric Drawings with Weld Details and BOM.
Skid Structural Design Calculation Report.
Skid Structural Detailed Fabrication Drawing with BOM & Anchor Bolt Details.
Pipe Support Drawings.
Foundation Load data.
Lifting Calculation Report.
Lifting Drawing ,Gratings / Platforms / Ladders drawing (As Required, related to skid within
Battery limit)
Location : OMAN
Responsibilities:
Responsibilities:
Location : ASSAM.
Client : OIL INDIA LIMITED
Responsibilities:
Location : IRAQ
Client : GAZPROM NEFT
Responsibilities:-
To supervise erection of pipe spools and pipe supports as per latest issued drawings for
construction and ensure that project specifications and standard codes were correctly
executed.
To perform inspection, approval of fit-ups & welded joints and dimensions as per isometric
and specifications.
To check the loops and their drawings according to the P&ID.
Analysis of GA, P&ID ,PFD & Isometric drawings.
Maintain healthy work atmosphere and safety awareness within the group
Maintaining daily progress reports from all fields of work.
Supervision of Piping & Mechanical Equipment Erection, Fabrication, Testing &
Commissioning.
Preparation of piping material requisitions for procurement and co-ordination with
procurement group.
Conducting Floating test, Nozzle stress free, Pigging, Picking, Pneumatic test, oil flushing
procedures.
Package clearance, ECC walkdown and handover of systems.
Having sufficient knowledge in technical skills in Design & Detail Engineering of OIL&GAS
Study and Implementation of work as per P & ID Drawings..
Checking Of Isometrics as per P&ID.
Review 3d model in Navis Work /Smart Plant Review for proper integration & Layout clarity.
Always maintain Quality work within scheduled time.
Piping Engineer Seonghwa Constuction India Pvt Ltd. March 2013 June 2013
Location : DAHEJ,GUJRAT
Client : TORRENT POWER
Responsibilities:-
To supervise erection of pipe spools and pipe supports as per latest issued drawings for
construction and ensure that project specifications and standard codes were correctly
executed.
To perform inspection, approval of fit-ups & welded joints and dimensions as per isometric
and specifications.
To check the loops and their drawings according to the P&ID.
Analysis of GA, P&ID ,PFD & Isometric drawings
Maintain healthy work atmosphere and safety awareness within the group
Maintaining daily progress reports from all fields of work.
Supervision of Piping & Mechanical Equipment Erection, Fabrication, Testing &
Commissioning.
Preparation of piping material requisitions for procurement and co-ordination with
procurement group.
Conducting Floating test, Nozzle stress free, Pigging, Picking, Pneumatic test, oil flushing
procedures.
Package clearance, ECC walkdown and handover of systems.
Having sufficient knowledge in technical skills in Design & Detail Engineering of OIL&GAS
Study and Implementation of work as per P & ID Drawings..
Review 3d model in Navis Work /Smart Plant Review for proper integration & Layout clarity.
Piping Engineer Offshore Infrastructures Ltd. June 2011 March 2013
Project : POLYPROPLENE UNIT, OPAL PETROCHEMICAL COMPLEX
Location : DAHEJ,GUJRAT
Client : ONGC
Responsibilities:-
Responsible for execution of all field engineering and design activities related to all
underground and above ground piping system
Study and Implementation of work as per P & ID Drawings.
Fixing the Tie in points for the area and skid piping.
Checking of Equipment Layout as per the vendor Information Available.
To perform inspection, approval of fit-ups & welded joints and dimensions as per isometric
and specifications.
To check the loops and their drawings according to the P&ID.
Analysis of GA, P&ID ,PFD & Isometric drawings
Maintain healthy work atmosphere and safety awareness within the group
Maintaining daily progress reports from all fields of work.
Supervision of Piping & Mechanical Equipment Erection, Fabrication, Testing &
Commissioning.
Preparation of piping material requisitions for procurement and co-ordination with
procurement group.
Package clearance, ECC walkdown and handover of systems.
Having sufficient knowledge in technical skills in Design & Detail Engineering of OIL&GAS
Study and Implementation of work as per P & ID Drawings.
Review 3d model in Navis Work /Smart Plant Review for proper integration & Layout clarity.
Supervise sand blasting and painting and surface preparation as per project requirement.
Always maintain Quality work within scheduled time.
TECHNICAL SKILLS
Preparation of G.A Drawings and Isometrics based on P&ID and plant layout.
Pipe support and Rack design, Expansion loop design.
Piping Material Selection/Specification/Valve Data Sheets.
Pressure design of Process Piping and Component as per ASME B 31.3 [Straight Pipe,
Flanges, Elbows and Miter bends, Reinforced branch connections, Blanks, Blind flanges,
Expansion joints].
Flexibility analysis of piping systems.
Hydraulic design of Liquid Piping and Pipelines (Pipe sizing, Pump head & power
calculations)
Vendor document coordination.
Monitoring of various welding process like SMAW & GTAW etc.
International Design codes & Dimensional standards. Viz: ANSI/ASME, API, BS, ASTM & there
use in design, analysis and calculation.
Pipe Work Modelling Pipe Modelling, Modify Pipe Routing, Pipe Orientation, Pipe work
utilities.
Structural Work Beams & columns, Walls & floor, Panel & Plates ASL Modeller .
Support & Electrical Works- Hangers and Supports, HVAC, Cable tray & Rack, Cabling
System.
Drawing Manager Drafting, ISO generation
Report & Utilities Spooler, Report Generation, PDMS commands
SOFTWARE KNOWN
PDMS AVEVA- EQUIPMENT, PIPING, STRUCTURES.
SP3D
Navisworks Manage/Simulate/Freedom
Smart Plant Reiew
Autocad
Exposure on CAESER-II Software
ACADEMIC QUALIFICATIONS
PERSONAL DETAILS
I hereby declare that the above details provided are true to the best of my knowledge.
(Sudeep Mishra)