Professional Documents
Culture Documents
DFX1000 provides Switched Ethernet, E1 and Serial data interfaces for transmission
over optical fibre at gigabit transmission speeds. The DFX1000 can be housed in a Nokia
Dynanet subrack, for existing PDH networks that require a cost-effective upgrade to support
advanced broadband switched Ethernet services. Fully manageable via SNMP, HTTP and
TELNET, the DFX1000 can operate in point to point and loop network topologies and has
environmental and reliability performance compatible with the DYNANET product line.
DFX1000 has been Single fibre working and dual fibre Full remote configuration and
designed to empower Nokia working options are available with software download options reduces
Dynanet equipment by providing and without digital diagnostics. installation requirements and time.
10/100/1000Mbps Ethernet, Serial
(V.11/RS232) and G.703/2M The DFX1000 delivers high A comprehensive set of SNMP
customer interfaces over a performance layer 2 Ethernet traps and alarms are provided to
1000Mbps Ethernet based fibre switching in a compact form factor. assist fault management and
connection. isolation.
Tag based VLANs (802.1q) are
The DFX1000 is a Dynanet supported allowing network
Compatible line card for delivering segmentation without being
truly broadband Ethernet based restricted by physical connections. Technical Highlights
services such as video monitoring VLAN stacking is also supported
Customer Interfaces
whilst maintaining support for allowing network designers more - 4 x 10/100Base-T
existing PDH infrastructure. flexibility. - 1 x 1000Base-X (SFP)
- 4 x G.703/2M Balanced (20/75 ohm)
The equipment provides Advanced features such as rate (Additional ports are available upon request)
4x10/100Base-T, 1x1000Base-X, limitation on the Ethernet ports is - 4 x V.11/X.21 or 2 x RS232
4xV.11 or 2xRS232, and 4xG. provided preventing unpredictable Network Interfaces
703/2M (balanced 120/75 ohm) network performance due to - 2 x 1000Base-X (SFP)
customer interfaces. broadcast storms or malfunctioning - Point to point, linear or ring network
equipment. topologies
Each unit has two SFP based - Single or dual fibre working
1000Base-X optical uplink The DFX1000 can be managed - < 50ms protection switching
interfaces. These can be configured locally via the console port or - 802.1q/p Tag based VLAN
for point-to-point, linear or ring remotely using Telnet, SNMP or - VLAN Stacking
operation. WebServer over a secure VLAN. - Rate limiting on Ethernet ports
- Management via SNMP, Telnet, CLI
The optical network interfaces can The Q1 protocol used to manage - Contact alarms (2 x outputs)
accept SFP devices thereby the Dynanet node is seamlessly - 20-72 VDC Power Supply
allowing a range of power options transported over the provided V.11 - -5 to +65 C operational
for short haul and long haul interfaces, ensuring that existing
applications. management systems are
maintained.
DFX1000 Optical Network Terminal