Professional Documents
Culture Documents
*------------------------------------------------------------------
* express setup resource file - includes express setup (incl. smartports info
page), managed and recovery mode pages
* Copyright (c) 2006-2008, 2010 by cisco Systems, Inc.
* feature code - xSetup
*------------------------------------------------------------------
*/
//macchiato
var re_xSetup_Ttl = "Express Setup";
var re_xSetup_Txt2 = "The DHCP server will renegotiate the switch IP address. Use
the new address to launch the device manager.";
var re_xSetup_InfoChkBox1 = "Yes, enable the port roles and display the Smartports
dialog";
var re_xSetup_InfoChkBox2 = "No, Thanks";
var re_xSetup_RecTxt1 = "The switch will be restarted. Use Express Setup to assign
an IP address to the switch. Refer to the getting started guide for procedures.";
var re_xSetup_RecTxt2 = "The switch will be restarted. Enter the switch IP address
in a browser session to display the device manager.";
//non-macchiato
var re_xSetup_LblMgmtInt = "Management Interface (VLAN ID)";
var re_xSetup_LblSwPwd = "Switch Password";
var re_xSetup_LblConfirmSwPwd = "Confirm Switch Password";
var re_xSetup_LblTelnet = "Telnet Access";
var re_xSetup_LblTelnetPwd = "Telnet Password";
var re_xSetup_LblConfTelnetPwd = "Confirm Telnet Password";
var re_xSetup_LblSnmp = "SNMP";
var re_xSetup_LblSnmpRead = "SNMP Read Community";
var re_xSetup_LblSnmpWrite = "SNMP Write Community";
var re_xSetup_LblSysContact = "System Contact";
var re_xSetup_LblSysLocation = "System Location";
var re_xSetup_LblDisable = "Disable";
//new strings
var re_xSetup_Grp1Tt3 = "Wireless Controller Settings";
var re_xSetup_LblCtrllerStackNumber = "Stack{\n}Number";
var re_xSetup_LblCtrllerVlan = "Management{\n}VLAN ID";
//pixar strings
var re_xSetup_tab_Lbl1 = "Basic Settings";
var re_xSetup_tab_Lbl2 = "Advanced Settings";
var re_xSetup_Grp1Tt4 = "Ethernet Management Port Settings";
var re_xSetup_Ttl2 = "Express Setup: Add";
var re_xSetup_BtnAdd = "Add";
var re_xSetup_BtnDel = "Delete";
var re_xSetup_TblHdrInterface = "Interface";
var re_xSetup_TblHdrIPv6Address = "IPv6 Address";
var re_xSetup_TblHdrPrefixLength = "Prefix{0}Length";
var re_xSetup_TblHdrEUI = "EUI-64";
var re_xSetup_TblHdrSelect = "Select";
var re_xSetup_ErrMsg61 = "Select at least one IPv6 address to delete.";
var re_xSetup_ErrMsg62 = "{0} is not a valid IPv6 unicast address. Enter an IPv6
unicast address in the x:x:x:x:x:x:x:x format, where x can be 0 to 9 and A to F.
Each x field can contain up to 4 characters.";
var re_xSetup_ErrMsg63 = "This is an IPv6 multicast address. You can configure this
address on the switch through Network Assistant or the CLI. You can configure only
IPv6 unicast addresses through the device manager. Enter an IPv6 unicast address in
the x:x:x:x:x:x:x:x format, where x can be 0 to 9 and A to F. Each x field can
contain up to 4 characters.";
var re_xSetup_ErrMsg64 = "This is an IPv6 site local address. You can configure
this address on the switch through Network Assistant or the CLI. You can configure
only IPv6 unicast addresses through the device manager. Enter an IPv6 unicast
address in the x:x:x:x:x:x:x:x format, where x can be 0 to 9 and A to F. Each x
field can contain up to 4 characters.";
var re_xSetup_ErrMsg65 = "The IPv6 unicast address {0} is already assigned to the
subnet. Enter an IPv6 unicast address in the x:x:x:x:x:x:x:x format, where x can be
0 to 9 and A to F. Each x field can contain up to 4 characters.";
var re_xSetup_ErrMsg66 = "The IPv6 unicast address {0} is already assigned to the
subnet. Enter an IPv6 unicast address in the x:x:x:x:x:x:x:x format, where x can be
0 to 9 and A to F. Each x field can contain up to 4 characters.";
var re_xSetup_ConfMsg11 = "The switch will restart to enable IPv6. Do you want to
continue?";
var re_xSetup_ConfMsg12 = "The switch will restart to disable IPv6. Do you want to
continue?";
//New error message for hostname and username and password fields.
var re_xSetup_ErrMsg76 = "Error:\n\nEnter a username. The name can have up to 64
alphanumeric characters.\nIt can contain only A-Z, a-z, 0-9, hyphen, underscore and
dot characters.";
var re_xSetup_ErrMsg77 = "Error:\n\nThe password can start with a number, is case
sensitive.\nIt can contain only A-Z, a-z, 0-9, hyphen, underscore and dot
characters.";
var re_xSetup_ErrMsg78 = "Error:\n\nThe hostname can contain only A-Z, a-z, 0-9,
hyphen, underscore and dot characters.";
//xmen2 - 040908
var re_xSetup_ConfMsg15 = "Warning:\n\nYou have chosen not to use the default VLAN
{0}. After you click Submit, these events occur:\n\n- All switch ports will be
assigned to the VLAN that you have specified, VLAN {1}.\n- The Express Setup
session ends.\n- The connection between the switch and your laptop or PC
ends.\n\nTo manage the switch through the device manager, enter the switch IP
address from a browser session. Make sure that the switch and your management
station are in the same subnetwork. Do you want to continue?";
//for PSIRT
var re_xSetup_ErrMsg85 = "Enter a username. It can have up to 64 alphanumeric
characters. The name cannot contain a ?, a space, or a tab.";
var re_xSetup_ErrMsg86 = "The username cannot be the same as the default
username.";
var re_xSetup_ErrMsg87 = "Enter a switch password. The switch password can start
with a number, is case sensitive,\nand allows embedded spaces. It cannot contain
a ? or a tab or a single digit.";
var re_xSetup_ErrMsg88 = "The switch password cannot be the same as the default
password.";
//for mtu
var re_xSetup_LblMtu = "MTU";
var re_xSetup_LblMtuJumbo = "Jumbo MTU";
var re_xSetup_LblMtuRouting = "Routing MTU";
var re_xSetup_ErrMsg89 = "Enter a valid MTU size in the range {0} to {1}.";
var re_xSetup_ErrMsg90 = "Enter a valid Jumbo MTU size in the range {0} to {1}.";
var re_xSetup_ErrMsg91 = "Enter a valid Routing MTU size in the range {0} to {1}.";
var re_xSetup_ConfMsg16 = "The changed MTU size will not take effect until the next
reload is done. Do you want to continue?";
var re_xSetup_ConfMsg17 = "The changed Jumbo MTU size will not take effect until
the next reload is done. Do you want to continue?";