Professional Documents
Culture Documents
Version 11/03/2011
SikaRep S
Thin Patching Repair Mortar for Very Smooth Finishing
Technical Data
Colour Grey
o
Pot life (30 C) 20-30 minutes
Physical Data
o
Density (20 C) 1.30 kg/l (bulk density of powder)
2.03 kg/l (density of fresh mortar)
SikaRep S 1/3
D00199070311E
Application
o o
Limitations Optimal application temperature : between 5 C and 35 C
Substrate Preparation Substrate must be sound, free of loose or weak particles, dust and dirt. Oil and
wax containing layers, as well as laitance must be completely removed.
The substrate must be throughly wetted down prior to the mortar application.
Fill sufficient clean water into a small container. Add SikaRep S to the wat
and hand mix thoroughly with a spatula until a smooth workable consistency
is achieved. Always respect the water/powder ratio.
If a mix has thickened due to delayed application do not dilute further with water.
For large repair, a mechanical mixing (of the whole bag) using a drill and a paddle is
advisable. Pour water in given quantity in a clean drum and add SikaRep S
slowly while mixing. Use a low speed electric mixer for 3 minutes avoiding entrapped
Follow the ratio 4.7 to 5.3 Ltr. of water per bag 20 kg
Curing - SikaRep S cures with low shrinkage. To prevent premature drying out of
the mortar, keep it moist if exposed to strong sunshine and wind.
- Standard curing methods are recommended.
Cleaning Application and mixing tools should be cleaned with water while material is
still fresh. Hardened material can only be removed mechanically.
SikaRep S 2/3
Safety Instructions
Safety precautions Protect skin and eyes from contact with mortar. Wear protective clothing
and goggles while working with the product.Should the material enter the
eyes rinse immediately with clean water and seek medical attention.
Toxicity Non-toxic
Transport Non-hazardous.
The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sikas current
knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sikas ecommendations. In
practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular
purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or
from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. Sika reserves the right to change
the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery.
Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.