You are on page 1of 38

DBPRIN

Print Results from the


Database
Version 10.39

E SOFiSTiK AG, Oberschleissheim, 2011


DBPRIN Print Results from Database

This manual is protected by copyright laws. No part of it may be translated,


copied or reproduced, in any form or by any means, without written permission
from SOFiSTiK AG. SOFiSTiK reserves the right to modify or to release new
editions of this manual.
The manual and the program have been thoroughly checked for errors.
However, SOFiSTiK does not claim that either one is completely error free.
Errors and omissions are corrected as soon as they are detected.
The user of the program is solely responsible for the applications. We strongly
encourage the user to test the correctness of all calculations at least by random
sampling.
Print Results from Database DBPRIN

1 Task Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2 Input Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.1. Input Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.2. Input Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.3. TEXT Input of a Subheading . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.4. LC Selection of Load Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.5. BOX Box within the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.6. ITEM Selection of the Result Type . . . . . . . . . . . . . . . . . . . . . . . 25
2.7. SELE Selection of the Result Range . . . . . . . . . . . . . . . . . . . . . 29
2.8. PRIN Print of the Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
2.9. ECHO Output Extent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213

3 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.1. Plate System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3.2. ThreeDimensional Frame and Girder System. . . . . . . . . . . . . . 37
3.3. Girder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314

i
DBPRIN Print Results from Database

This page intentionally left blank

ii
Print Results from Database DBPRIN

1 Task Description.

The program DBPRIN is a tool for the engineer in order to get the results for the
necessary checks in a clear form fast.

Nearly all results which have been stored in the data base may be printed. In this
case an arbitrary selection is possible. An important range of application is the
representation of the maximum and minimum values or of the amountwise maxi-
mum values for a specific selection of nodes or elements.

Therefore it is possible to switch off the output during the calculation and to print
only some important selected results with DBPRIN.

After processing of the input the required data are read from the database and
output in the demanded form.

Version 10.39 11
DBPRIN Print Results from Database
This page intentionally left blank

12 Version 10.39
Print Results from Database DBPRIN

2 Input Description.

2.1. Input Language


The input is made in the CADINP language. The description is to be taken from
the general manual SOFiSTiK: FEA / STRUCTURAL Installation and Basics.

2.2. Input Records


The following records are defined:

Record Items
TEXT
LC NO
BOX XMIN YMIN ZMIN XMAX YMAX ZMAX
ITEM TYPE KIND KND2
SELE NO X GRP MAX ENO DNO SNO
PRIN RANG SORT
ECHO OPT VAL

The sequence of the input records is arbitrary, however, it does not make sence
in all cases. A corresponding selection has to be defined in each case before
PRIN. The selection remain active also for the following PRIN records as long
as they are not redefined.

The records HEAD, END and PAGE are described in the general manual SOFi-
STiK: FEA / STRUCTURAL Installation and Basics.

It follows the description of the individual records:

Version 10.39 21
DBPRIN Print Results from Database



TEXT
2.3.
Item
TEXT Input of a Subheading
Description

Unit Default

Subheading LIT128

As many as desired records of this type may be input. They are printed before the
next output block. Blank lines are generated with an input of the record TEXT.

22 Version 10.39
Print Results from Database DBPRIN
See also: PRIN



LC
2.4.
Item
LC Selection of Load Cases
Description

Unit Default

NO Number of a load case 1

All load cases which were defined before with LC are processed in the next PRIN
command. If no record LC was input, all load cases which are stored in the data-
base are processed.

If no new records LC are defined after a record PRIN, the load case selection is
maintained.

Version 10.39 23
DBPRIN Print Results from Database
See also: PRIN



BOX
2.5.
Item
BOX Box within the System
Description

Unit Default

XMIN Only the elements or nodes of the overall m *


YMIN system which lie within the window defined m *
ZMIN with BOX are output. An element is only m *
printed, if it lies completely within BOX.
XMAX m *
YMAX m *
ZMAX m *

The maximum or minimum available coordinates in the system are the default.

24 Version 10.39
Print Results from Database DBPRIN
See also: SELE PRIN



ITEM
2.6.
Item
ITEM Selection of the Result Type
Description

Unit Default

TYPE Selection of the element type LIT


The following literals are possible:
NODE Nodes
BOUN Single boundary values
BOUS Sum of all boundary values
BEAM Bending beams
SPRI Springs
TRUS Truss elements
CABL Cable elements
QUAD Results in the gravity centre
of plane elements
QUAK Node results of plane ele
ments
KIND Kind of the results to be processed LIT
The following literals are possible:
DISP Displacements or deforma
tions and pile bedding stress
REAC Support reactions and
boundary values
VELO velocities
ACCE accelerations
FORC Internal forces or bedding
stresses of QUADs
STRE Stresses (from the programs
BEMESS or AQB)
REIN Reinforcements
CONS Forces of kinematic con
straints

KND2 Further specification of KIND LIT


Input values see next page

Version 10.39 25
DBPRIN Print Results from Database

The input of KND2 is necessary, if not all values which are available in KIND
should be processed. The allowable inputs are:

MX, MY, MXY, VX, VY Internal forces and moments of plates


MOM (MX, MY and MXY)

SIGX, SIGY, TAU Stresses for disks


NX, NY, NXY Membrane forces and moments for
S (SIGX...TAU or NX...NXY) disks

SMIO, SMAO, SMIU, SMAU Max. and min. stresses of the plane
TAUM elements (*O = top, *U = bottom)

ASO, ASOQ, ASU, ASUQ Reinforcement of the plane elements


TAU0, ASS, ASSE Shear stresses, shear reinforcements

PX, PY, PZ, MXX, MYY, MZZ, MB Support reactions


PT Force in transverse direction

KPX, KPY, KPZ, Forces of kinematic constraints


KMXX, KMYY, KMZZ

UX, UY, UZ Nodal displacements


UT Displacement in transverse direction
PHIX, PHIY, PHIZ, PHID Nodal rotations and nodal warping

VX, VY, VZ, VRX, VRY, VRZ nodal velocities


AX, AY, AZ, ARX, ARY, ARZ nodal accelerations

STN, STVY, STVZ, Normal and shear forces in beams


STMT, STMY, STMZ Moments in beams
STMB, STM2 Bimoment for beams and secondary
torsional moment

STU, STUY, STUZ Beam deformations


STPX, STPY, STPZ. STPA, STPT Pile bedding stress values

26 Version 10.39
Print Results from Database DBPRIN
SIG, SIG+, STAU Beam stresses from AQB (SIG
is the stress at the upper side or
the max. compressive stress for
threedimensional problems, SIG+
is the stress at the lower side or
max. tensile stress)
SIG1, SIG2, SIGV Beam stresses from AQB (principle and
equivalent stresses)

SMIN, SMAX Minimum or maximum normal


stress truss or cable elements
from program AQB

ASL Longitudinal reinforcement for beams


from program AQB
ASB Stirrup reinforcement for beams from
program AQB

N Forces for cable and truss elements


P Forces for spring elements
M Moments of spring elements

BEDD Bedding stresses (plane elements)


STPA, STPT Axial and tranverse bedding for piles

RPX, RPY, RPZ Support reactions in X,Y,Z direction


RMN Support moments
SRPX, SRPY, SRPZ Sum of the support reactions in X,Y,Z
direction
SRMN Sum of the support moments

USAG Degree of utilization

Version 10.39 27
DBPRIN Print Results from Database

The following combinations are currently possible for KIND and KND2:

DISP REAC FORC STRE REIN CONS


NODE x x x
BOUN/S x
BEAM x x x x
SPRI x
TRUS x x
CABL x x
QUAD x x x
QUAK x x x

The number of the ITEM records up to the next PRIN record is dependent on
TYPE and KIND.

Bedding stresses at QUAD / QUAK elements have to be selected with ITEM


QUAD FORC BEDD.

28 Version 10.39
Print Results from Database DBPRIN
See also: ITEM PRIN


2.7. SELE Selection of the Result

SELE
Item
Range
Description

Unit Default

NO Number of the element or node *


Default: all elements and nodes
X Selection of a beam section m *
ALLall beam sections
PRIN beam sections with PRIN
attribute only
value X value of a specific beam
section
positive value from beam
beginning
negative value from beam end

GRP Element group (only for node results at *


plane elements)
Default: all groups
Material number (for stresses in composite
sections from program AQBS)

MAX Maximum value to be printed *


MIN Minimum value to be printed *
ENO Last number for elements or nodes NO
DNO Increment 1
SNO Section number *

For NO it is possible to select a group of elements or nodes insted of a number


with a question mark or a star (wildcard symbols). For beam, truss and cable el-
ements it is alsp possible to select elements by theri section number.

Version 10.39 29
DBPRIN Print Results from Database

Examples:

2??? All fourdigit numbers which have a 2 for the thousand


132?5 13205, 13215, ....13285, 13295
20* All element numbers which have a 20 at the beginning

If no record SELE is defined, all results of the desired type which were stored in
the database are processed.

A range may be defined with an input of two limits. Only the elements for which
the value of KND2 is smaller than MAX and more than MIN are printed (case 1).
If MAX is smaller than MIN, only the values which are outside the range are
printed. In this case these values which are smaller than MAX or more than MIN
are used (case 2).

MIN MAX
case 1
output values

case 2 MAX MIN

output values output values

The values for MAX and MIN have to be defined in the unit of the input. They are
defined independently by PAGE UNIO in SOFISTIK.DIM (Description of the re-
cord PAGE see general manual SOFiSTiK: FEA / STRUCTURAL Installation
and Basics). The following dimensions are to be input as a default:

displacements mm, mrad


support reactions, internal forces,
forces for kinematic constraints kN, kNm
stresses N/mm2
reinforcements cm2

Remarks:

The use of the element generator with ENO and DNO is more effective than
a generation with CADINP. A total of 9999 records of the type SELE is al-
lowed.

210 Version 10.39


Print Results from Database DBPRIN
See also: LC BOX ITEM SELE



PRIN
2.8.
Item
PRIN Print of the Results
Description

Unit Default

RANG Output extent of the selected elements LIT ALL


(see below)

SORT Sort criteria for the output LIT ELEM


LC Sorted according to load cases
ELEM Sorted according to
elements or nodes
SECT Sorted according to sections
SELC Sorted according to sections
and load cases

The following literals are possible for RANG:

ALL All results are printed separately.

MAXZ The maximum values which are available in the results of KND2 are
printed with the corresponding values of all selected load cases and
elements.

MINZ The minimum values which are available in the results of KND2 are
printed with the corresponding values of all selected load cases and
elements.

MAMZ The maximum and minimum values which are available in the results
of KND2 are printed with the corresponding values of all selected load
cases and elements.

MAX The maximum values of all selected load cases and elements and the
maximum values which are available in KIND are printed.

MIN The minimum values of all selected load cases and elements and the
minimum values which are available in KIND are printed.

MAMI The maximum and minimum values of all selected load cases and el-
ements and the maximum and minimum values which are available
in KIND are printed.

Version 10.39 211


DBPRIN Print Results from Database
BMAX The amountwise maximum values of all selected load cases and el-
ements and the amountwise maximum values which are available
in KIND are printed.

For MAXZ, MINZ and MAMZ so many lines are output as results for KIND occur.
Only one line is printed in each case for MAX, MIn, MAMI and BMAX.

Note:
Beam results at sections which were generated due to loads and which were not
defined in segments may be printed only with SORT LC.

212 Version 10.39


Print Results from Database DBPRIN



ECHO
2.9.
Item
ECHO Output Extent
Description

Unit Default

OPT This item describes an area of the output LIT FULL


which this record ECHO refers to.
A literal from the following list:
FULL All options
SELE Selection of the values to be
incorporated
RES Result lists
LC Load cases
GLOB Beam forces in global
directions
VAL Extent of the output LIT *
NO No output
YES Output without headline
FULL Regular output

Example:

OPT FULL all options


SELE NO = do not print
YES = print
RES NO = do not print (not reeasonable!)
YES = print without headline
FULL = print with headline (default)
LC NO = do not print
YES = print
GLOB NO = beam forces not in global directions
(default)
YES = beam forces in global directions

With ECHO SELE NO; ECHO RES YES result data which are suitable for the
postprocessing with the spreadsheet programs LOTUS, SUPERCALC, QUAT-
TRO PRO may be generated.

Version 10.39 213


DBPRIN Print Results from Database
This page intentionally left blank

214 Version 10.39


Print Results from Database DBPRIN

3 Examples

The input files which are explained here are to be found in the installation directory
SOFiSTiK in the subdirectory dbprin.dat\english. Alternatively you will find these
examples via the TEDDY menu HELP > EXAMPLES sorted by program name
and language.

For additional help like tutorials, tutorial movies and practical examples please
refer to the SOFiSTiK Infoportal (www.sofistik.com/Infoportal).

Version 10.39 31
DBPRIN Print Results from Database

3.1. Plate System.


In the following input the internal forces and moments, the maximum and mini-
mum stresses as well as the determined reinforcements of all elements are se-
lected at first.

The input for the internal forces and moments reads:

PROG DBPRIN
HEAD PLATE SYSTEM
PAGE 1

ITEM QUAD FORC


SELE *
PRIN

It follows the result list:

Loadcasenumber name
1 DEAD_LOAD

QUAD Intervall and Selection:


from to inc. Min Max KIND KND2
* all all FORC -

Explanation of Literals:
* Means any number of any digits
- No input was made
FORC Forces and Moments

Extent of output:All Results will be printed individually.

PLATE FORCES AND MOMENTS


Element Lc m-xx m-yy m-xy v-x v-y
No No [kNm/m] [kNm/m] [kNm/m] [kN/m] [kN/m]
1013 1 -6.06 -1.73 0.93 -16.81 -0.72
1014 1 -3.70 -4.41 4.36 -18.30 0.61
1015 1 0.61 -14.24 -1.97 -20.91 26.35
1016 1 4.95 7.24 -7.04 -8.01 12.13
. . .
1115 1 -1.65 -1.85 -3.92 2.20 1.97
1116 1 -4.65 -0.74 -4.88 8.68 0.27
1117 1 -7.99 -0.93 -4.13 14.56 -0.52
1118 1 -10.86 -1.89 -3.36 19.01 -0.84
1119 1 -13.16 -2.17 -2.75 23.04 -0.56

32 Version 10.39
Print Results from Database DBPRIN
With the input:

ITEM QUAD STRE


SELE *
PRIN

one receives the element stresses in the QUAD elements:

QUAD Intervall and Selection:


from to inc. Min Max KIND KND2
* all all STRE -

Explanation of Literals:
* Means any number of any digits
- No input was made
STRE Stresses

Extent of output:All Results will be printed individually.

ELEMENTSTRESSES
Element Lc sigma above min max below: min max Tau-max
No No [MPa] [MPa] [MPa] [MPa] [MPa]
1013 1 0.23 0.94 -0.94 -0.23 0.13
1014 1 -0.05 1.26 -1.26 0.05 0.14
1015 1 -0.13 2.17 -2.17 0.13 0.25
1016 1 -1.98 0.15 -0.15 1.98 0.11

. . .

1115 1 -0.33 0.85 -0.85 0.33 0.02


1116 1 -0.38 1.19 -1.19 0.38 0.07
1117 1 -0.15 1.48 -1.48 0.15 0.11
1118 1 0.12 1.80 -1.80 -0.12 0.14
1119 1 0.23 2.07 -2.07 -0.23 0.17

With the input:

ITEM QUAD REIN


SELE *
PRIN

one receives the reinforcements in the QUAD elements:

Version 10.39 33
DBPRIN Print Results from Database

QUAD Intervall and Selection:


from to inc. Min Max KIND KND2
* all all REIN -

Explanation of Literals:
* Means any number of any digits
- No input was made
REIN Reinforcements

Extent of output:All Results will be printed individually.

REINFORCEMENTS ABOVE/BELOW IN
Element Lc As-e As-m As-i Dire Dirm Diri Tau0 AsS AsSE
No No [cm2/m] [cm2/m] [cm2/m] [-] [-] [-] [MPa] [cm2/m2] [cm2]
1013 1 1.41 0.57 0.00 0 0.10 0.00 0.0
0.00 0.00 0.00 0
1014 1 1.63 1.88 0.00 0 0.11 0.00 0.0
0.12 0.02 0.00 0
1015 1 0.70 3.51 0.00 0 0.20 0.00 0.0
0.18 0.04 0.00 0
1016 1 0.38 0.08 0.00 0 0.09 0.00 0.0
2.45 3.09 0.00 0

. . .

1115 1 1.13 1.23 0.00 0 0.02 0.00 0.0


0.46 0.44 0.00 0
1116 1 1.93 1.21 0.00 0 0.05 0.00 0.0
0.18 0.88 0.00 0
1117 1 2.46 1.09 0.00 0 0.09 0.00 0.0
0.05 0.26 0.00 0
1118 1 2.89 1.13 0.00 0 0.11 0.00 0.0
0.00 0.00 0.00 0
1119 1 3.24 1.06 0.00 0 0.14 0.00 0.0
0.00 0.00 0.00 0

Afterwards the element that has the minimum principal stress at the top of the
plate should be output. The input for that reads:

ITEM QUAD STRE SMIO


SELE *
PRIN MAXZ

34 Version 10.39
Print Results from Database DBPRIN

One receives:

QUAD Intervall and Selection:


from to inc. Min Max KIND KND2
* all all STRE SMIO

Explanation of Literals:
* Means any number of any digits
STRE Stresses
SMIO Min. principal stress on upper side for plate and shell elements

Extent of output:Maximum Values of all with KND2 defined


results will be printed together with corresponding values
of all selected loadcases and elements.

ELEMENTSTRESSES
Element Lc name sigma above min max below: min max Tau-max
No No [MPa] [MPa] [MPa] [MPa] [MPa]
1067 1 MAXZ-SMIO 2.72 3.36 -3.36 -2.72 0.36

With the input:


the plate internal forces and moments of all elements which have a 1 at the last
digit of the element number are printed:

QUAD Intervall and Selection:


from to inc. Min Max KIND KND2
???1 all all FORC -

Explanation of Literals:
? Means any digit at this position
- No input was made
FORC Forces and Moments

Extent of output:All Results will be printed individually.

PLATE FORCES AND MOMENTS


Element Lc m-xx m-yy m-xy v-x v-y
No No [kNm/m] [kNm/m] [kNm/m] [kN/m] [kN/m]
1021 1 -5.80 -3.09 -6.29 -15.57 -0.71
1031 1 10.01 4.25 6.07 -3.87 -5.84
1041 1 11.14 4.49 -1.77 5.09 -0.23
1051 1 6.28 1.21 -2.02 9.49 0.74
1061 1 -5.60 -1.31 -0.50 15.99 -0.17
1071 1 15.07 2.95 5.86 -7.79 -3.81
1081 1 7.29 7.81 0.78 -0.43 5.81
1091 1 0.85 -6.96 -2.41 0.14 12.84

Version 10.39 35
DBPRIN Print Results from Database
A selection with BOX is shown at the end. With the input:

BOX XMAX 5 YMAX 4


ITEM QUAD FORC
SELE *
PRIN

one receives the plate internal forces and moments for the elements in the plate
area from Xmin = Ymin= 0 to Xmax = 5.0 m and Ymax = 4.0 m:

BOX-Selection Xmin/Xmax[m] Ymin/Ymax[m] Zmin/Zmax[m]


0.000 0.000 0.000
5.000 4.000 0.000

QUAD Intervall and Selection:


from to inc. Min Max KIND KND2
* all all FORC -

Explanation of Literals:
* Means any number of any digits
- No input was made
FORC Forces and Moments

Extent of output:All Results will be printed individually.

PLATE FORCES AND MOMENTS


Element Lc m-xx m-yy m-xy v-x v-y
No No [kNm/m] [kNm/m] [kNm/m] [kN/m] [kN/m]
1061 1 -5.60 -1.31 -0.50 15.99 -0.17
1062 1 -6.17 -1.51 -0.90 16.58 -0.16
1063 1 -7.19 -1.30 -1.04 17.16 -0.04
1064 1 -8.20 -1.50 -0.78 17.47 -0.28

36 Version 10.39
Print Results from Database DBPRIN

3.2. ThreeDimensional Frame and Girder System.


First the beam internal forces and moments which are sorted according to the
load cases (block 1) are output. In the 2nd block the output is sorted according to
the element numbers. In the block 3 the maximum and minimum values for the
beam moment My, the shear forces Vz and the torsional moment Mt should be
printed with the corresponding values.

PROG DBPRIN
HEAD Selected Printout
PAGE 1

ITEM BEAM FORC


SELE *
PRIN SORT LC

ITEM BEAM FORC ; SELE * ; PRIN SORT ELEM


ITEM BEAM FORC ; SELE * X PRIN ; PRIN SORT ELEM
ITEM BEAM FORC ; SELE * X ALL ; PRIN SORT ELEM
ITEM BEAM FORC ; SELE * X 0.0 ; PRIN SORT ELEM
ITEM BEAM FORC ; SELE * X -0.0 ; PRIN SORT ELEM
ITEM BEAM FORC STMY,STVZ,STMT
SELE *
PRIN MAMZ

END

The output reads for the beam internal forces and moments which are sorted ac-
cording to the load cases:

Selected loadcases
1 2 7 8 10 11

Beams Intervall and Selection:


from to inc. Section mno Min Max KIND KND2
* all all all FORC -

Explanation of Literals:
* Means any number of any digits
- No input was made
FORC Forces and Moments

Extent of output:All Results will be printed individually.

Version 10.39 37
DBPRIN Print Results from Database
Forces and Moments
Loadcase 1
Beam x N Vy Vz Mt My Mz
No [m] [kN] [kN] [kN] [kNm] [kNm] [kNm]
1 0.000 0.0 -62.59 0.00 0.00 0.00 -125.93
2 5.000 0.0 37.41 0.00 0.00 0.00 0.00

Forces and Moments


Loadcase 2
Beam x N Vy Vz Mt My Mz
No [m] [kN] [kN] [kN] [kNm] [kNm] [kNm]
1 0.000 0.0 0.00 100.00 0.00 -500.00 0.00
2 5.000 0.0 0.00 0.00 0.00 0.00 0.00

Forces and Moments


Loadcase 7
Beam x N Vy Vz Mt My Mz
No [m] [kN] [kN] [kN] [kNm] [kNm] [kNm]
1 0.000 0.0 -62.59 0.00 0.00 0.00 -125.93
2 5.000 0.0 37.41 0.00 0.00 0.00 0.00

Forces and Moments


Loadcase 8
Beam x N Vy Vz Mt My Mz
No [m] [kN] [kN] [kN] [kNm] [kNm] [kNm]
1 0.000 0.0 -62.59 100.00 0.00 -500.00 -125.93
2 5.000 0.0 37.41 0.00 0.00 0.00 0.00

It follows the output of the beam internal forces and moments which are sorted
according to the elements (block 2, PRINT SORT ELEM).
At first the values at continous beam beginning (beam 1 x = 0.0) and continous
beam end (beam 2 x = 5.0) are output here with SELE * (no input for X):
Loadcasenumber name
1
2
7
8
10 MAX-AQB-S
11 MIN-AQB-S

Beams Intervall and Selection:


from to inc. Section mno Min Max KIND KND2
* all all all FORC -

38 Version 10.39
Print Results from Database DBPRIN
Explanation of Literals:
* Means any number of any digits
- No input was made
FORC Forces and Moments

Extent of output:All Results will be printed individually.

Forces and Moments


Beam x Lc N Vy Vz Mt My Mz
No [m] No [kN] [kN] [kN] [kNm] [kNm] [kNm]
1 0.000 1 0.0 -62.59 0.00 0.00 0.00 -125.93
1 0.000 2 0.0 0.00 100.00 0.00 -500.00 0.00
1 0.000 7 0.0 -62.59 0.00 0.00 0.00 -125.93
1 0.000 8 0.0 -62.59 100.00 0.00 -500.00 -125.93
2 5.000 1 0.0 37.41 0.00 0.00 0.00 0.00
2 5.000 2 0.0 0.00 0.00 0.00 0.00 0.00
2 5.000 7 0.0 37.41 0.00 0.00 0.00 0.00
2 5.000 8 0.0 37.41 0.00 0.00 0.00 0.00

Only the beam section with PRIN attribute are printed in the second case with X
PRIN:

Loadcasenumber name
1
2
7
8
10 MAX-AQB-S
11 MIN-AQB-S

Beams Intervall and Selection:


from to inc. Section mno Min Max KIND KND2
* PRIN all all FORC -

Explanation of Literals:
* Means any number of any digits
- No input was made
FORC Forces and Moments

Extent of output:All Results will be printed individually.

Forces and Moments


Beam x Lc N Vy Vz Mt My Mz
No [m] No [kN] [kN] [kN] [kNm] [kNm] [kNm]
1 0.000 1 0.0 -62.59 0.00 0.00 0.00 -125.93
1 0.000 2 0.0 0.00 100.00 0.00 -500.00 0.00
1 0.000 7 0.0 -62.59 0.00 0.00 0.00 -125.93
1 0.000 8 0.0 -62.59 100.00 0.00 -500.00 -125.93

Version 10.39 39
DBPRIN Print Results from Database
2 5.000 1 0.0 37.41 0.00 0.00 0.00 0.00
2 5.000 2 0.0 0.00 0.00 0.00 0.00 0.00
2 5.000 7 0.0 37.41 0.00 0.00 0.00 0.00
2 5.000 8 0.0 37.41 0.00 0.00 0.00 0.00

The output of all beam sections is done with X ALL (third case):

Loadcasenumber name
1
2
7
8
10 MAX-AQB-S
11 MIN-AQB-S

Beams Intervall and Selection:


from to inc. Section mno Min Max KIND KND2
* ALL all all FORC -
Explanation of Literals:
* Means any number of any digits
- No input was made
FORC Forces and Moments

Extent of output:All Results will be printed individually.

Forces and Moments


Beam x Lc N Vy Vz Mt My Mz
No [m] No [kN] [kN] [kN] [kNm] [kNm] [kNm]
1 0.000 1 0.0 -62.59 0.00 0.00 0.00 -125.93
1 0.000 2 0.0 0.00 100.00 0.00 -500.00 0.00
1 0.000 7 0.0 -62.59 0.00 0.00 0.00 -125.93
1 0.000 8 0.0 -62.59 100.00 0.00 -500.00 -125.93
1 1.000 1 0.0 -52.59 0.00 0.00 0.00 -68.34
1 1.000 2 0.0 0.00 90.00 0.00 -405.00 0.00
1 1.000 7 0.0 -52.59 0.00 0.00 0.00 -68.34
1 1.000 8 0.0 -52.59 90.00 0.00 -405.00 -68.34
1 2.000 1 0.0 -42.59 0.00 0.00 0.00 -20.74
1 2.000 2 0.0 0.00 80.00 0.00 -320.00 0.00
1 2.000 7 0.0 -42.59 0.00 0.00 0.00 -20.74
1 2.000 8 0.0 -42.59 80.00 0.00 -320.00 -20.74
1 3.000 1 0.0 -32.59 0.00 0.00 0.00 16.85
1 3.000 2 0.0 0.00 70.00 0.00 -245.00 0.00
1 3.000 7 0.0 -32.59 0.00 0.00 0.00 16.85
1 3.000 8 0.0 -32.59 70.00 0.00 -245.00 16.85
1 4.000 1 0.0 -22.59 0.00 0.00 0.00 44.44
1 4.000 2 0.0 0.00 60.00 0.00 -180.00 0.00
1 4.000 7 0.0 -22.59 0.00 0.00 0.00 44.44
1 4.000 8 0.0 -22.59 60.00 0.00 -180.00 44.44

310 Version 10.39


Print Results from Database DBPRIN
1 5.000 1 0.0 -12.59 0.00 0.00 0.00 62.03
1 5.000 2 0.0 0.00 50.00 0.00 -125.00 0.00
1 5.000 7 0.0 -12.59 0.00 0.00 0.00 62.03
1 5.000 8 0.0 -12.59 50.00 0.00 -125.00 62.03
2 0.000 1 0.0 -12.59 0.00 0.00 0.00 62.03
2 0.000 2 0.0 0.00 50.00 0.00 -125.00 0.00
2 0.000 7 0.0 -12.59 0.00 0.00 0.00 62.03
2 0.000 8 0.0 -12.59 50.00 0.00 -125.00 62.03
2 1.000 1 0.0 -2.59 0.00 0.00 0.00 69.63
2 1.000 2 0.0 0.00 40.00 0.00 -80.00 0.00
2 1.000 7 0.0 -2.59 0.00 0.00 0.00 69.63
2 1.000 8 0.0 -2.59 40.00 0.00 -80.00 69.63
2 2.000 1 0.0 7.41 0.00 0.00 0.00 67.22
2 2.000 2 0.0 0.00 30.00 0.00 -45.00 0.00
2 2.000 7 0.0 7.41 0.00 0.00 0.00 67.22
2 2.000 8 0.0 7.41 30.00 0.00 -45.00 67.22
2 3.000 1 0.0 17.41 0.00 0.00 0.00 54.81
2 3.000 2 0.0 0.00 20.00 0.00 -20.00 0.00
2 3.000 7 0.0 17.41 0.00 0.00 0.00 54.81
2 3.000 8 0.0 17.41 20.00 0.00 -20.00 54.81
2 4.000 1 0.0 27.41 0.00 0.00 0.00 32.41
2 4.000 2 0.0 0.00 10.00 0.00 -5.00 0.00
2 4.000 7 0.0 27.41 0.00 0.00 0.00 32.41
2 4.000 8 0.0 27.41 10.00 0.00 -5.00 32.41
2 5.000 1 0.0 37.41 0.00 0.00 0.00 0.00
2 5.000 2 0.0 0.00 0.00 0.00 0.00 0.00
2 5.000 7 0.0 37.41 0.00 0.00 0.00 0.00
2 5.000 8 0.0 37.41 0.00 0.00 0.00 0.00

The values of the beam beginnings are output with X 0.0 (fourth case) and the
values of the beam ends with X 0.0 (fifth case):

Loadcasenumber name
1
2
7
8
10 MAX-AQB-S
11 MIN-AQB-S

Beams Intervall and Selection:


from to inc. Section mno Min Max KIND KND2
* 0.00 all all FORC -

Explanation of Literals:
* Means any number of any digits
- No input was made
FORC Forces and Moments

Version 10.39 311


DBPRIN Print Results from Database

Extent of output:All Results will be printed individually.

Forces and Moments


Beam x Lc N Vy Vz Mt My Mz
No [m] No [kN] [kN] [kN] [kNm] [kNm] [kNm]
1 0.000 1 0.0 -62.59 0.00 0.00 0.00 -125.93
1 0.000 2 0.0 0.00 100.00 0.00 -500.00 0.00
1 0.000 7 0.0 -62.59 0.00 0.00 0.00 -125.93
1 0.000 8 0.0 -62.59 100.00 0.00 -500.00 -125.93
2 0.000 1 0.0 -12.59 0.00 0.00 0.00 62.03
2 0.000 2 0.0 0.00 50.00 0.00 -125.00 0.00
2 0.000 7 0.0 -12.59 0.00 0.00 0.00 62.03
2 0.000 8 0.0 -12.59 50.00 0.00 -125.00 62.03

Loadcasenumber name
1
2
7
8
10 MAX-AQB-S
11 MIN-AQB-S

Beams Intervall and Selection:


from to inc. Section mno Min Max KIND KND2
* 0.00 all all FORC -

Explanation of Literals:
* Means any number of any digits
- No input was made
FORC Forces and Moments

Extent of output:All Results will be printed individually.

Forces and Moments


Beam x Lc N Vy Vz Mt My Mz
No [m] No [kN] [kN] [kN] [kNm] [kNm] [kNm]
1 5.000 1 0.0 -12.59 0.00 0.00 0.00 62.03
1 5.000 2 0.0 0.00 50.00 0.00 -125.00 0.00
1 5.000 7 0.0 -12.59 0.00 0.00 0.00 62.03
1 5.000 8 0.0 -12.59 50.00 0.00 -125.00 62.03
2 5.000 1 0.0 37.41 0.00 0.00 0.00 0.00
2 5.000 2 0.0 0.00 0.00 0.00 0.00 0.00
2 5.000 7 0.0 37.41 0.00 0.00 0.00 0.00
2 5.000 8 0.0 37.41 0.00 0.00 0.00 0.00

312 Version 10.39


Print Results from Database DBPRIN
The last list is that of the maximum and minimum values for the beam moment
My, the shear force Vz and the torsional moment Mt:

Loadcasenumber name
1
2
7
8
10 MAX-AQB-S
11 MIN-AQB-S

Beams Intervall and Selection:


from to inc. Section mno Min Max KIND KND2
* all all all FORC STMY
* all all all FORC STVZ
* all all all FORC STMT

Explanation of Literals:
* Means any number of any digits
FORC Forces and Moments
STMY Beam bending moment about local y-direction
STVZ Beam shear force in local z-direction
STMT Beam torsional moment about local x-direction

Extent of output:Max. and min. Values of all with KND2 defined


results will be printed together with corresponding values
of all selected loadcases and elements.

Forces and Moments


Beam x Lc name N Vy Vz Mt My Mz
No [m] No [kN] [kN] [kN] [kNm] [kNm] [kNm]
1 0.000 2 MAXZ-STVZ 0.0 0.00 100.00 0.00 -500.00 0.00
2 5.000 2 MINZ-STVZ 0.0 0.00 0.00 0.00 0.00 0.00
1 0.000 1 MAXZ-STMT 0.0 -62.59 0.00 0.00 0.00 -125.93
1 0.000 1 MINZ-STMT 0.0 -62.59 0.00 0.00 0.00 -125.93
2 5.000 2 MAXZ-STMY 0.0 0.00 0.00 0.00 0.00 0.00
1 0.000 2 MINZ-STMY 0.0 0.00 100.00 0.00 -500.00 0.00

Version 10.39 313


DBPRIN Print Results from Database

3.3. Girder.
In the following example all beams whose element number starts with 2 are re-
quested. The internal forces and moments for this beams are output in the block
1. In the 2nd block the minimum and maximum values are printed for all available
beam internal forces and moments. In the block 3 the maximum and minimum va-
lues are requested for all internal forces and moments of these elements with the
corresponding values. The blocks 4 and 5 show the use of MAX and MIN in the
record SELE. In the block 4 the results are output, if STMY is between 10 and
+10, and in the block 5 only then, if STMY is outside of this range.

PROG DBPRIN
HEAD Selected Printout
PAGE 1

ITEM BEAM FORC


SELE 2*
PRIN

ITEM BEAM FORC


SELE 2*
PRIN MAMI

ITEM BEAM FORC


SELE 2*
PRIN MAMZ

ITEM BEAM FORC STMY


SELE 2* MAX 10 -10
PRIN

ITEM BEAM FORC STMY


SELE 2* MAX -10 10
PRIN

END

Loadcasenumber name
1

Beams Intervall and Selection:


from to inc. Section mno Min Max KIND KND2
2* all all all FORC -

314 Version 10.39


Print Results from Database DBPRIN
Explanation of Literals:
* Means any number of any digits
- No input was made
FORC Forces and Moments

Extent of output:All Results will be printed individually.

Forces and Moments


Beam x Lc Vz Mt My
No [m] No [kN] [kNm] [kNm]
2 0.000 1 40.80 -8.45 407.19
2 1.000 1 -9.20 -8.45 422.99
2 2.000 1 -59.20 -8.45 388.79
2 3.000 1 -109.20 -8.45 304.58
2 4.000 1 -159.20 -8.45 170.38
21 0.000 1 -3.14 5.54 3.51
21 1.000 1 -3.14 5.54 0.37
21 2.000 1 -3.14 5.54 -2.78
21 3.000 1 -3.14 5.54 -5.92
21 4.000 1 -3.14 5.54 -9.06
22 0.000 1 0.55 -2.08 -8.03
22 1.000 1 0.55 -2.08 -7.48
22 2.000 1 0.55 -2.08 -6.92
22 3.000 1 0.55 -2.08 -6.37
22 4.000 1 0.55 -2.08 -5.81
23 0.000 1 6.15 -3.68 -8.07
23 1.000 1 6.15 -3.68 -1.92
23 2.000 1 6.15 -3.68 4.23
23 3.000 1 6.15 -3.68 10.38
23 4.000 1 6.15 -3.68 16.54
24 0.000 1 -6.15 3.68 16.54
24 1.000 1 -6.15 3.68 10.38
24 2.000 1 -6.15 3.68 4.23
24 3.000 1 -6.15 3.68 -1.92
24 4.000 1 -6.15 3.68 -8.07
25 0.000 1 -0.55 2.08 -5.81
25 1.000 1 -0.55 2.08 -6.37
25 2.000 1 -0.55 2.08 -6.92
25 3.000 1 -0.55 2.08 -7.48
25 4.000 1 -0.55 2.08 -8.03
26 0.000 1 3.14 -5.54 -9.06
26 1.000 1 3.14 -5.54 -5.92
26 2.000 1 3.14 -5.54 -2.78
26 3.000 1 3.14 -5.54 0.37
26 4.000 1 3.14 -5.54 3.51

Version 10.39 315


DBPRIN Print Results from Database
Loadcasenumber name
1
Beams Intervall and Selection:
from to inc. Section mno Min Max KIND KND2
2* all all all FORC -

Explanation of Literals:
* Means any number of any digits
- No input was made
FORC Forces and Moments

Extent of output:Max. and min. Values of all selected loadcases,


Elements and all with KIND defined Values will be
printed.

Forces and Moments


name Vz Mt My
[kN] [kNm] [kNm]
Maximum 40.80 5.54 422.99
Minimum -159.20 -8.45 -9.06

Loadcasenumber name
1

Beams Intervall and Selection:


from to inc. Section mno Min Max KIND KND2
2* all all all FORC -

Explanation of Literals:
* Means any number of any digits
- No input was made
FORC Forces and Moments

Extent of output:Max. and min. Values of all with KND2 defined


results will be printed together with corresponding values
of all selected loadcases and elements.

Forces and Moments


Beam x Lc name Vz Mt My
No [m] No [kN] [kNm] [kNm]
2 0.000 1 MAXZ-STVZ 40.80 -8.45 407.19
2 4.000 1 MINZ-STVZ -159.20 -8.45 170.38
21 0.000 1 MAXZ-STMT -3.14 5.54 3.51
2 0.000 1 MINZ-STMT 40.80 -8.45 407.19
2 1.000 1 MAXZ-STMY -9.20 -8.45 422.99
26 0.000 1 MINZ-STMY 3.14 -5.54 -9.06

316 Version 10.39


Print Results from Database DBPRIN

Loadcasenumber name
1

Beams Intervall and Selection:


from to inc. Section mno Min Max KIND KND2
2* all -10.00 10.00 FORC STMY

Explanation of Literals:
* Means any number of any digits
FORC Forces and Moments
STMY Beam bending moment about local y-direction

Extent of output:All Results will be printed individually.


Only Results with values KND2 in the interval [Min,Max] will
be printed. If Max ist less than Min, then all values out-
side the interval ]Max,Min[ will be printed.

Forces and Moments


Beam x Lc Vz Mt My
No [m] No [kN] [kNm] [kNm]
21 0.000 1 -3.14 5.54 3.51
21 1.000 1 -3.14 5.54 0.37
21 2.000 1 -3.14 5.54 -2.78
21 3.000 1 -3.14 5.54 -5.92
21 4.000 1 -3.14 5.54 -9.06
22 0.000 1 0.55 -2.08 -8.03
22 1.000 1 0.55 -2.08 -7.48
22 2.000 1 0.55 -2.08 -6.92
22 3.000 1 0.55 -2.08 -6.37
22 4.000 1 0.55 -2.08 -5.81
23 0.000 1 6.15 -3.68 -8.07
23 1.000 1 6.15 -3.68 -1.92
23 2.000 1 6.15 -3.68 4.23
24 2.000 1 -6.15 3.68 4.23
24 3.000 1 -6.15 3.68 -1.92
24 4.000 1 -6.15 3.68 -8.07
25 0.000 1 -0.55 2.08 -5.81
25 1.000 1 -0.55 2.08 -6.37
25 2.000 1 -0.55 2.08 -6.92
25 3.000 1 -0.55 2.08 -7.48
25 4.000 1 -0.55 2.08 -8.03
26 0.000 1 3.14 -5.54 -9.06
26 1.000 1 3.14 -5.54 -5.92
26 2.000 1 3.14 -5.54 -2.78
26 3.000 1 3.14 -5.54 0.37
26 4.000 1 3.14 -5.54 3.51

Version 10.39 317


DBPRIN Print Results from Database

Loadcasenumber name
1

Beams Intervall and Selection:


from to inc. Section mno Min Max KIND KND2
2* all 10.00 -10.00 FORC STMY

Explanation of Literals:
* Means any number of any digits
FORC Forces and Moments
STMY Beam bending moment about local y-direction

Extent of output:All Results will be printed individually.


Only Results with values KND2 in the interval [Min,Max] will
be printed. If Max ist less than Min, then all values out-
side the interval ]Max,Min[ will be printed.
Forces and Moments
Beam x Lc Vz Mt My
No [m] No [kN] [kNm] [kNm]
2 0.000 1 40.80 -8.45 407.19
2 1.000 1 -9.20 -8.45 422.99
2 2.000 1 -59.20 -8.45 388.79
2 3.000 1 -109.20 -8.45 304.58
2 4.000 1 -159.20 -8.45 170.38
23 3.000 1 6.15 -3.68 10.38
23 4.000 1 6.15 -3.68 16.54
24 0.000 1 -6.15 3.68 16.54
24 1.000 1 -6.15 3.68 10.38

318 Version 10.39

You might also like