Professional Documents
Culture Documents
Program Description:
"ENDPLMC9" is a spreadsheet program written in MS-Excel for the purpose of analysis and design of end plate
moment connections per the AISC 9th Edition (ASD) Manual. Specifically the program can analyze both single
4-tension bolt and 8-tension bolt configurations, as well as the conditions of having moment connections on
each side of the column attached to the column flanges.
1. This program uses the database of member dimensions and section properties from the "AISC Shapes
Database", Version 3.0 (2001) as well as the AISC 9th Edition (ASD) Manual (1989).
2. This program is based on the non-seismic specific design procedures found in the following two references:
a. "Moment Connections - End Plate (Static Loading Only)" on pages 4-116 through 4-125
(Static Loading Only)" on pages 4-116 through 4-125, AISC 9th Edition (ASD) Manual (1989).
b. "Extended End-Plate Moment Connections" - AISC Steel Design Guide Series #4,
by Thomas M. Murray, PhD, P.E., First Edition (AISC 1990).
3. This program also refers to "Extended End-Plate Moment Connections" - AISC Steel Design Guide Series #4,
First Edition (1990), by Thomas M. Murray, PhD, P.E.
4. This program contains numerous comment boxes which contain a wide variety of information including
explanations of input or output items, equations used, data tables, etc. (Note: presence of a comment box
is denoted by a red triangle in the upper right-hand corner of a cell. Merely move the mouse pointer to the
desired cell to view the contents of that particular "comment box".)
"ENDPLMC9.xls" Program
Version 1.0
2 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
(continued)
3 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
tw(req'd) =
Results: Column Web
td(min) =
Bolt Design: Web Double
Horizontal Force at Beam Flange: Assume 1/2 of beam axial force is also taken at each flange Vd =
Ff = 93.08 kips Ff = (M*12)/(d-tf)+P/2 Lw =
fw =
Bolt Tension and Shear: w=
Ab = 0.6013 in.^2 Ab = p*db^2/4 w(max) =
V = 15.00 kips V = (R/Nb)*(4 bolts) (portion of end shear taken by 4 tension bolts) Web Double
fv = 6.24 ksi fv = (V/(4 bolts))/Ab (shear stress on 4 tension bolts) h/twc =
ft = 38.70 ksi ft = (Ff/(4 bolts))/Ab (4 tension bolts acting at one time) h/twc(max) =
Fv = 21.00 ksi Fv = 21.0 from AISC Table J3.2 (for N bolts in shear) h/td =
Vb = 12.60 kips/bolt Vb = Fv*Ab h/td(max) =
Ft = 42.02 ksi Ft = SQRT(44^2-4.39*fv^2) (for N, X bolts in tension) Column Stiffe
B = 25.30 kips/bolt B = Ft*Ab (for N, X bolts in tension) Fyc(use) =
T(cap) = 101.20 kips T(cap) = B*(4 bolts) (for N, X bolts in tension) T(cap) >= Ff, O.K. Local Web Y
V(cap) = 74.44 kips V(cap) = Vb*(Nb-4)+SQRT(((44*Ab*4)^2-Ff^2)/4.39) (for N, X bolts) Pbf =
V(cap) >= R, O.K. Pwy =
End Plate Design: Compressiv
Top Flange to End Plate Welding: Pbf =
Lw = 14.545 in. Lw = 2*(bf+tf)-tw Pwb =
fw = 6.399 kips/in. fw = Ff/Lw Local Flange
w= 0.431 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) Pbf =
w(max) = 0.208 in. w(max) = 0.40*Fyb*tf/((SQRT(2)/2)*0.30*70*2) Pf =
Weld size > weld max., Fail bp =
Increase beam size or use full-pen. weldPec =
End Plate Required Thickness: Ca =
Bp(max) = 7.990 in. Bp(max) = bf+1" Cb =
D= 7 D = w*16, rounded up to nearest 1/16" Afc/Awc =
Pf = 1.4450 in. Pf = maximum of: D1 or S-(D1+tf) am =
Pe = 0.917 in. Pe = Pf-(db/4)-0.7071*D/16 Me =
Ca = 1.13 Ca = 1.13 for Fyb = 36 ksi, Ca = 1.11 for Fyb = 50 ksi tfc(req'd) =
Cb = 0.935 Cb = SQRT(bf/Bp(max)) Pfb =
Af/Aw = 0.677 Af/Aw = (bf*tf)/((d-(2*tf))*tw) Stiff. Req'd?
am = 0.939 am = Ca*Cb*(Af/Aw)^(1/3)*(Pe/db)^(1/4) Column Stiffe
Me = 20.04 in.-kips Me = am*Ff*Pe/4 Required Ar
tp(req'd) = 0.746 in. tp(req'd) = SQRT((6*Me)/(Bp*(0.75*Fyp))) tp >= tp(req'd), O.K.Ps =
As(req'd) =
Beam Web to End Plate Welding: Stiffener Wid
fw = 3.186 kips/in. fw = maximum of: (0.60*Fyb)*tw/2 or R/(2*(d/2-tf)) bs(min) =
w = 0.215 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) bs(use) =
Stiffener Thi
Bolt Bearing on End Plate: ts(min) =
Fu = 58.00 ksi Fu = 58 for Fyp = 36, Fu = 65 for Fyp = 50 Stiffener Len
Rpe = 65.25 kips Rpe = 2*(0.5*Fu*(ED)*tp) (based on bolt edge distance) Ls(min) =
Rps = 274.05 kips Rps = 2*(1.2*Fu*tp*db*(Nb/2-1)) (based on bolt spacing) Ls(use) =
Rp = 339.30 kips Rp = Minimum of: Rpe+Rps or 1.2*Fu*tp*db*Nb Provided Are
Rp >= R, O.K. As(prov) =
Shear Stress (out of plane) on End Plate: Check Stiffe
fv = 7.76 ksi fv = Ff/(2*Bp*tp) b/t =
Fv = 14.40 ksi Fv = 0.40*Fyc Fv >= fv, O.K. b/t(max) =
(continued)
4 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
Ps =
Column Web Doubler Plate Requirement: Lw =
Column Web Panel Shear: fw =
SF = 95.33 kips SF = M*12/(0.95*d) w=
tw(req'd) = 0.427 in. tw(req'd) = SF/(0.4*Fyc*dc) w(max)
twc >= tw(req'd), O.K. =
Stiffener We
Column Web Doubler Plate: Ps =
td(min) = N.A. in. td(min) = (tw(req'd)-twc)*Fyc/Fyd but not < 1/4" min. Lw =
fw =
Web Doubler Plate Welding: w=
Vd = N.A. kips Vd = SF*td/(td+twc) (at each vertical edge) w(max) =
Lw = N.A. in. Lw = d (plate height = beam depth) W27x307
fw = N.A. kips/in. fw = Vd/Lw W27x281
w= N.A. in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) W27x258
w(max) = N.A. in. w(max) = 0.40*Fyd*td/((SQRT(2)/2)*0.30*70) W27x235
W27x217
Web Doubler Plate Plug Welding Requirements: W27x194
h/twc = N.A. h/twc = (dc-2*tfc)/twc W27x178
h/twc(max) = N.A. h/twc(max) = 380/SQRT(Fyc) W27x161
h/td = N.A. h/td = (dc-2*tfc)/td W27x146
h/td(max) = N.A. h/td(max) = 380/SQRT(Fyd) W27x129
W27x114
W27x102
Column Stiffener Requirements: (Assume Fyc = 36 ksi, per AISC Design Guide Series #4) W27x94
Local Web Yielding: Stiffeners not req'd. at both flanges if: Pbf <= Pwy W27x84
Pbf = 155.13 kips Pbf = (5/3)*Ff W24x492
Pwy = 482.04 kips Pwy = Fyc*twc*(tf+6*k+2*tp+2*(D/16)) Pbf <= Pwy, O.K. W24x450
W24x408
Compressive Buckling of Web: W24x370
Pbf = 155.13 kips Stiffeners not required at compression flange if: Pbf <= Pwb W24x335
Pwb = 1518.58 kips Pwb = 4100*twc^3*SQRT(Fyc)/(dc-2*k) Pbf <= Pwb, O.K. W24x306
W24x279
Local Flange Bending: W24x250
Pbf = 155.13 kips Stiffeners not required at compression flange if: Pbf <= Pwb W24x229
Pf = 1.4450 in. Pf = maximum of: D1 or S-(D1+tf) W24x207
bp = 8.300 in. bp = 2.5*(Pf+tf+Pf) (effective column flange length) W24x192
Pec = 0.844 in. Pec = (g/2)-k1-(db/4) W24x176
Ca = 1.13 Ca = 1.13 (for Fyc =36 ksi) W24x162
Cb = 1.00 Cb = 1.0 (assumed) W24x146
Afc/Awc = 1.00 Afc/Awc = 1.0 (assumed) W24x131
am = 1.120 am = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db)^(1/4) W24x117
Pfb = 327.89 kips Pfb = ((tfc^2*(0.75*Fyc)*bp)/6)/(am*Pec/4) Pbf <= Pfb, O.K. W24x104
Conclusion: Stiffeners are not required W24x103
W24x94
W24x84
W24x76
W24x68
W24x62
W24x55
W21x402
W21x364
W21x333
(continued)
5 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
W21x275
Column Web Stiffener Design: W21x248
Required Area of Stiffener: W21x223
Ps = N.A. kips Ps = Pbf-(Minimum of Pwy,Pwb, or Pfb) (design force) W21x201
As(req'd) = N.A. in.^2 Ast = Ps/Fys W21x182
W21x166
Stiffener Width: W21x147
bs(min) = N.A. in. bs(min) = Bp/3-twc/2 W21x132
bs(use) = N.A. in. bs(use) = bfc/2-twc/2 (rounded down to nearest whole inch) W21x122
W21x111
Stiffener Thickness: W21x101
ts(min) = N.A. in. ts(min) = larger of: tp/2 or bs(use)*SQRT(Fyc)/95 W21x93
W21x83
Stiffener Length: W21x73
Ls(min) = N.A. in. Ls(min) = dc/2-tfc W21x68
Ls(use) = N.A. in. Ls(use) = dc/2-tfc W21x62
W21x57
Provided Area of Pair of Stiffeners: W21x55
As(prov) = N.A. in.^2 As(prov) = 2*bs(use)*ts W21x50
W21x48
Check Stiffener Slenderness: W21x44
b/t = N.A. b/t = bs(use)/ts W18x311
b/t(max) = N.A. b/t(max) = 95/SQRT(Fys) W18x283
W18x258
Stiffener Welding to Column Flange: W18x234
Ps = N.A. kips Ps = Pbf-(Minimum of Pwy,Pwb, or Pfb) (design force) W18x211
Lw = N.A. in. Lw = (bfc/2-(twc/2+0.75))*4 W18x192
fw = N.A. kips/in. fw = Ps/Lw W18x175
w= N.A. in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) W18x158
w(max) = N.A. in. w(max) = 0.40*Fys*ts/((SQRT(2)/2)*0.30*70*2) W18x143
W18x130
Stiffener Welding to Column Web: W18x119
Ps = N.A. kips Ps = Pbf-(Minimum of Pwy,Pwb, or Pfb) (design force) W18x106
Lw = N.A. in. Lw = (dc/2-(k+0.25))*4 W18x97
fw = N.A. kips/in. fw = Ps/Lw W18x86
w= N.A. in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) W18x76
w(max) = N.A. in. w(max) = 0.40*Fys*ts/((SQRT(2)/2)*0.3*70*2) W18x71
W18x65
W18x60
Comments: W18x55
W18x50
W18x46
W18x40
W18x35
W16x100
W16x89
W16x77
W16x67
W16x57
W16x50
W16x45
*Note: Check calculated fillet weld sizes (w) against thickness of materials being attached.
W16x36
6 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
7 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
(continued)
8 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
M2t =
Results: Ff =
Bolt Tension
Left Side Bolt Design: Ab =
Horizontal Force at Beam Flange: Assume 1/2 of beam axial force is also taken at each flange V=
M1t = 120.00 ft-k M1t = M1L+M1G fv =
Ff = 82.88 kips Ff = (M1t*12)/(d-tf)+P1/2 ft =
Bolt Tension and Shear: Fv =
Ab = 0.6013 in.^2 Ab = p*db1^2/4 Fv =
V = 15.00 kips V = (R1/Nb1)*(4 bolts) (portion of end shear taken by 4 tension bolts)Vb =
fv = 6.24 ksi fv = (V/(4 bolts))/Ab (shear stress on 4 tension bolts) Ft =
ft = 34.46 ksi ft = (Ff/(4 bolts))/Ab (4 tension bolts acting at one time) Ft =
Fv = 21.00 ksi Fv = 21.0 from AISC Table J3.2 (for N bolts in shear) B=
Vb = 12.60 kips/bolt Vb = Fv*Ab B=
Ft = 42.02 ksi Ft = SQRT(44^2-4.39*fv^2) (for N, X bolts in tension) T(cap) =
B = 25.30 kips/bolt B = Ft*Ab (for N, X bolts in tension) T(cap) =
T(cap) = 101.20 kips T(cap) = B*(4 bolts) (for N, X bolts in tension) T(cap) >= Ff, O.K.
V(cap) =
V(cap) = 81.81 kips V(cap) = Vb*(Nb1-4)+SQRT(((44*Ab*4)^2-Ff^2)/4.39) (for N, X bolts) V(cap) =
V(cap) >= R1, O.K. Right Side En
Left Side End Plate Design: Top Flange t
Top Flange to End Plate Welding: Lw =
Lw = 12.775 in. Lw = 2*(bf+tf)-tw fw =
fw = 6.488 kips/in. fw = Ff/Lw w=
w= 0.437 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) w(max) =
w(max) = 0.255 in. w(max) = 0.40*Fyb*tf/((SQRT(2)/2)*0.30*70*2) End Plate R
Weld size > weld max., Fail
Bp2(max) =
Increase beam size or use full-pen. weld D =
End Plate Required Thickness: Pf =
Bp1(max) = 7.020 in. Bp1(max) = bf+1" Pe =
D= 7 D = w*16, rounded up to nearest 1/16" Ca =
Pf = 1.3750 in. Pf = maximum of: D1 or S1-(D1+tf) Cb =
Pe = 0.847 in. Pe = Pf-(db1/4)-0.7071*D/16 Af/Aw =
Ca = 1.13 Ca = 1.13 for Fyb = 36 ksi, Ca = 1.11 for Fyb = 50 ksi am =
Cb = 0.926 Cb = SQRT(bf/Bp1(max)) Me =
Af/Aw = 0.595 Af/Aw = (bf*tf)/((d-(2*tf))*tw) tp2(req'd) =
am = 0.873 am = Ca*Cb*(Af/Aw)^(1/3)*(Pe/db1)^(1/4) Beam Web t
Me = 15.32 in.-kips Me = am*Ff*Pe/4 fw =
tp1(req'd) = 0.652 in. tp1(req'd) = SQRT((6*Me)/(Bp1*(0.75*Fyp))) tp1 >= tp1(req'd), O.K.w=
w(max) =
Beam Web to End Plate Welding: Bolt Bearing
fw = 3.402 kips/in. fw = maximum of: (0.60*Fyb)*tw/2 or R1/(2*(d/2-tf)) Fu =
w = 0.229 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) Rpe =
Rps =
Bolt Bearing on End Plate: Rp =
Fu = 58.00 ksi Fu = 58 for Fyp = 36, Fu = 65 for Fyp = 50 Shear Stres
Rpe = 65.25 kips Rpe = 2*(0.5*Fu*(ED1)*tp1) (based on bolt edge distance) fv =
Rps = 274.05 kips Rps = 2*(1.2*Fu*tp1*db1*(Nb1/2-1)) (based on bolt spacing) Fv =
Rp = 339.30 kips Rp = Minimum of: Rpe+Rps or 1.2*Fu*tp1*db1*Nb1 Column Web
Rp >= R1, O.K. Column Web
Shear Stress (out of plane) on End Plate: M1 =
fv = 6.91 ksi fv = Ff/(2*Bp1*tp1) M2 =
Fv = 14.40 ksi Fv = 0.40*Fyc Fv >= fv, O.K. SF =
(continued)
9 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
Column Web
Right Side Bolt Design: td(min) =
Horizontal Force at Beam Flange: Web Double
M2t = 120.00 ft-k M2t = M2L+M2G Vd =
Ff = 92.93 kips Ff = (M2t*12)/(d-tf)+P2/2 Lw =
Bolt Tension and Shear: fw =
Ab = 0.6013 in.^2 Ab = p*db2^2/4 w=
V = 15.00 kips V = (R2/Nb2)*(4 bolts) (portion of shear force taken by 4 tensionw(max)
bolts) =
fv = 6.24 ksi fv = (V/(4 bolts))/Ab (shear stress on 4 tension bolts) Web Double
ft = 38.64 ksi ft = (Ff/(4 bolts))/Ab (4 tension bolts acting at one time) h/twc =
Fv = 21.00 ksi Fv = 21.0 from AISC Table J3.2 (for N bolts in shear) h/twc(max) =
Vb = 12.60 kips/bolt Vb = Fv*Ab h/td =
Ft = 42.02 ksi Ft = SQRT(44^2-4.39*fv^2) (for N, X bolts in tension) h/td(max) =
B = 25.30 kips/bolt B = Ft*Ab (for N, X bolts in tension) Left Side Colu
T(cap) = 101.20 kips T(cap) = B*(4 bolts) (for N, X bolts in tension) T(cap) >= Ff,Fyc(use)
O.K. =
V(cap) = 74.57 kips V(cap) = Vb*(Nb2-4)+SQRT(((44*Ab*4)^2-Ff^2)/4.39) (for N, X bolts) Local Web Y
V(cap) >= R2, O.K. Pbf1 =
Right Side End Plate Design: Pwy =
Top Flange to End Plate Welding: Compressiv
Lw = 14.705 in. Lw = 2*(bf+tf)-tw Pbf1 =
fw = 6.320 kips/in. fw = Ff/Lw Pwb =
w= 0.426 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) Local Flange
w(max) = 0.245 in. w(max) = 0.40*Fyb*tf/((SQRT(2)/2)*0.30*70*2) Pbf1 =
Weld size > weld max., Fail Pf =
Increase beam size or use full-pen. weld bp =
End Plate Required Thickness: Pec =
Bp2(max) = 8.000 in. Bp1(max) = bf+1" Ca =
D= 7 D = w*16, rounded up to nearest 1/16" Cb =
Pf = 1.3750 in. Pf = maximum of: D1 or S1-(D1+tf) Afc/Awc =
Pe = 0.847 in. Pe = Pf-(db1/4)-0.7071*D/16 am =
Ca = 1.13 Ca = 1.13 for Fyb = 36 ksi, Ca = 1.11 for Fyb = 50 ksi Me =
Cb = 0.935 Cb = SQRT(bf/Bp1(max)) tfc(req'd) =
Af/Aw = 0.773 Af/Aw = (bf*tf)/((d-(2*tf))*tw) Pfb =
am = 0.962 am = Ca*Cb*(Af/Aw)^(1/3)*(Pe/db1)^(1/4) Stiff. Req'd?
Me = 18.93 in.-kips Me = am*Ff*Pe/4 Right Side Co
tp2(req'd) = 0.725 in. tp1(req'd) = SQRT((6*Me)/(Bp1*(0.75*Fyp))) tp2 >= tp2(req'd),
Fyc(use)
O.K. =
Local Web Y
Beam Web to End Plate Welding: Pbf2 =
fw = 3.294 kips/in. fw = maximum of: (0.60*Fyb)*tw/2 or R2/(2*(d/2-tf)) Pwy =
w = 0.222 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) Compressiv
Pbf2 =
Bolt Bearing on End Plate: Pwb =
Fu = 58.00 ksi Fu = 58 for Fyp = 36, Fu = 65 for Fyp = 50 Local Flange
Rpe = 65.25 kips Rpe = 2*(0.5*Fu*(ED2)*tp2) (based on bolt edge distance) Pbf2 =
Rps = 274.05 kips Rps = 2*(1.2*Fu*tp2*db2*(Nb2/2-1)) (based on bolt spacing) Pf =
Rp = 339.30 kips Rp = Minimum of: Rpe+Rps or 1.2*Fu*tp2*db2*Nb2 bp =
Rp >= R2, O.K. Pec =
Shear Stress (out of plane) on End Plate: Ca =
fv = 7.74 ksi fv = Ff/(2*Bp2*tp2) Cb =
Fv = 14.40 ksi Fv = 0.40*Fyc Fv >= fv, O.K. Afc/Awc =
am =
Me =
(continued)
10 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
Pfb =
Column Web Doubler Plate Requirement: Stiff. Req'd?
Column Web Panel Shear: Column Stiffe
M1 = 120.00 ft-k M1 = M1L+M1G Required Ar
M2 = 120.00 ft-k M2 = M2L-M2G Ps1 =
SF = 179.42 kips SF = (M1*12/(0.95*d))+(M2*12/(0.95*d)) Ps2 =
tw(req'd) = 0.804 in. tw(req'd) = SF/(0.4*Fyc*dc) twc >= tw(req'd),
Ps(max)
O.K. =
As(req'd) =
Column Web Doubler Plate: Stiffener Wid
td(min) = N.A. in. td(min) = (tw(req'd)-twc)*Fyc/Fyd but not < 1/4" min. Bp(max) =
bs(min) =
Web Doubler Plate Welding: bs(use) =
Vd = N.A. kips Vd = SF*td/(td+twc) (at each vertical edge) Stiffener Thi
Lw = N.A. in. Lw = d (plate height = beam depth) tp(max) =
fw = N.A. kips/in. fw = Vd/Lw ts(min) =
w= N.A. in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) Stiffener Len
w(max) = N.A. in. w(max) = 0.40*Fyd*td/((SQRT(2)/2)*0.30*70) Ls(min) =
Ls(use) =
Web Doubler Plate Plug Welding Requirements: Provided Are
h/twc = N.A. h/twc = (dc-2*tfc)/twc As(prov) =
h/twc(max) = N.A. h/twc(max) = 380/SQRT(Fyc) Check Stiffe
h/td = N.A. h/td = (dc-2*tfc)/td b/t =
h/td(max) = N.A. h/td(max) = 380/SQRT(Fyd) b/t(max) =
Stiffener We
Ps(max) =
Left Side Column Stiffener Requirements: (Assume Fyc = 36 ksi, per AISC Design Guide Series #4) Lw =
Local Web Yielding: Stiffeners not req'd. at both flanges if: Pbf1 <= Pwy fw =
Pbf1 = 138.13 kips Pbf1 = (5/3)*Ff w=
Pwy = 485.09 kips Pwy = Fyc*twc*(tf+6*k+2*tp+2*(D/16)) w(max) =
Pbf1 <= Pwy, O.K.
Stiffener We
Compressive Buckling of Web: Ps(max) =
Pbf1 = 138.13 kips Stiffeners not required at compression flange if: Pbf1 <= Pwb Lw =
Pwb = 1518.58 kips Pwb = 4100*twc^3*SQRT(Fyc)/(dc-2*k) Pbf1 <= Pwb, O.K. fw =
w=
Local Flange Bending: w(max) =
Pbf1 = 138.13 kips Stiffeners not required at compression flange if: Pbf1 <= Pwb W18x76
Pf = 1.3750 in. Pf = maximum of: D1 or S1-(D1+tf) W18x71
bp = 8.188 in. bp1 = 2.5*(Pf+tf+Pf) (effective column flange length) W18x65
Pec = 0.844 in. Pec = (g1/2)-k1-(db1/4) W18x60
Ca = 1.13 Ca = 1.13 (for Fyc =36 ksi) W18x55
Cb = 1.00 Cb = 1.0 (assumed) W18x50
Afc/Awc = 1.00 Afc/Awc = 1.0 (assumed) W18x46
am = 1.120 am = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db1)^(1/4) W18x40
Pfb = 323.45 kips Pfb = ((tfc^2*(0.75*Fyc)*bp1)/6)/(am*Pec/4) Pbf1 <= Pfb, O.K. W18x35
Conclusion: Stiffeners are not required W16x100
W16x89
W16x77
W16x67
W16x57
W16x50
W16x45
W16x40
(continued)
11 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
W16x31
Right Side Column Stiffener Requirements: (Assume Fyc = 36 ksi, per AISC Design Guide Series #4)W16x26
Local Web Yielding: Stiffeners not req'd. at both flanges if: Pbf2 <= Pwy W14x808
Pbf2 = 154.88 kips Pbf2 = (5/3)*Ff W14x730
Pwy = 484.44 kips Pwy = Fyc*twc*(tf+6*k+2*tp2+2*(D/16)) Pbf2 <= Pwy, O.K. W14x665
W14x605
Compressive Buckling of Web: W14x550
Pbf2 = 154.88 kips Stiffeners not required at compression flange if: Pbf2 <= Pwb W14x500
Pwb = 1518.58 kips Pwb = 4100*twc^3*SQRT(Fyc)/(dc-2*k) Pbf2 <= Pwb, O.K. W14x455
W14x426
Local Flange Bending: W14x398
Pbf2 = 154.88 kips Stiffeners not required at compression flange if: Pbf2 <= Pwb W14x370
Pf = 1.3750 in. Pf = maximum of: D2 or S2-(D2+tf) W14x342
bp = 8.138 in. bp2 = 2.5*(Pf+tf+Pf) (effective column flange length) W14x311
Pec = 0.844 in. Pec = (g2/2)-k2-(db2/4) W14x283
Ca = 1.13 Ca = 1.13 (for Fyc =36 ksi) W14x257
Cb = 1.00 Cb = 1.0 (assumed) W14x233
Afc/Awc = 1.00 Afc/Awc = 1.0 (assumed) W14x211
am = 1.120 am = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db2)^(1/4) W14x193
Pfb = 321.47 kips Pfb = ((tfc^2*(0.75*Fyc)*bp2)/6)/(am*Pec/4) Pbf2 <= Pfb, O.K. W14x176
Conclusion: Stiffeners are not required W14x159
W14x145
Column Web Stiffener Design: W14x132
Required Area of Stiffener: W14x120
Ps1 = N.A. kips Ps1 = Pbf1-(Minimum of Pwy,Pwb, or Pfb) W14x109
Ps2 = N.A. kips Ps2 = Pbf2-(Minimum of Pwy,Pwb, or Pfb) W14x99
Ps(max) = N.A. kips Ps(max) = max. of: Ps1 or Ps2 W14x90
As(req'd) = N.A. in.^2 Ast = Ps(max)/Fys W14x82
W14x74
Stiffener Width: W14x68
Bp(max) = N.A. in. Bp(max) = max. of: Bp1 or Bp2 W14x61
bs(min) = N.A. in. bs(min) = Bp(max)/3-twc/2 W14x53
bs(use) = N.A. in. bs(use) = bfc/2-twc/2 (rounded down to nearest whole inch) W14x48
W14x43
Stiffener Thickness: W14x38
tp(max) = N.A. in. tp(max) = max. of: tp1 or tp2 W14x34
ts(min) = N.A. in. ts(min) = larger of: tp(max)/2 or bs(use)*SQRT(Fyc)/95 W14x30
W14x26
Stiffener Length: W14x22
Ls(min) = N.A. in. Ls(min) = dc/2-tfc W12x336
Ls(use) = N.A. in. Ls(use) = dc-2*tfc W12x305
W12x279
Provided Area of Pair of Stiffeners: W12x252
As(prov) = N.A. in.^2 As(prov) = 2*bs(use)*ts W12x230
W12x210
Check Stiffener Slenderness: W12x190
b/t = N.A. b/t = bs(use)/ts W12x170
b/t(max) = N.A. b/t(max) = 95/SQRT(Fys) W12x152
W12x136
W12x120
W12x106
W12x96
(continued)
12 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
W12x79
Column Web Stiffener Design (continued): W12x72
W12x65
Stiffener Welding to Column Flange: W12x58
Ps(max) = N.A. kips Ps(max) = max. of: Ps1 or Ps2 W12x53
Lw = N.A. in. Lw = (bfc/2-(twc/2+0.75))*4 W12x50
fw = N.A. kips/in. fw = Ps(max)/Lw W12x45
w= N.A. in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) W12x40
w(max) = N.A. in. w(max) = 0.40*Fys*ts/((SQRT(2)/2)*0.30*70*2) W12x35
W12x30
Stiffener Welding to Column Web: W12x26
Ps(max) = N.A. kips Ps(max) = max. of: Ps1 or Ps2 W12x22
Lw = N.A. in. Lw = (dc-2*(k+0.25))*4 W12x19
fw = N.A. kips/in. fw = Ps(max)/Lw W12x16
w= N.A. in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) W12x14
w(max) = N.A. in. w(max) = 0.40*Fys*ts/((SQRT(2)/2)*0.3*70*2) W10x112
W10x100
W10x88
W10x77
Comments: W10x68
W10x60
W10x54
W10x49
W10x45
W10x39
W10x33
W10x30
W10x26
W10x22
W10x19
W10x17
W10x15
W10x12
W8x67
W8x58
W8x48
W8x40
W8x35
W8x31
W8x28
W8x24
W8x21
W8x18
W8x15
W8x13
W8x10
W6x25
W6x20
W6x16
W6x15
W6x12
*Note: Check calculated fillet weld sizes (w) against thickness of materials being attached.
W6x8.5
13 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
14 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
(continued)
15 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
td(min) =
Results: Web Double
Vd =
Bolt Design: Lw =
Horizontal Force at Beam Flange: Assume 1/2 of beam axial force is also taken at each flange fw =
Ff = 225.40 kips Ff = (M*12)/(d-tf)+P/2 w=
w(max) =
Bolt Tension and Shear: Web Double
Ab = 0.9940 in.^2 Ab = p*db^2/4 h/twc =
V = 15.00 kips V = (R/Nb)*(8 bolts) (portion of end shear taken by 8 tensionh/twc(max)
bolts) =
fv = 1.89 ksi fv = (V/(8 bolts))/Ab (shear stress on 8 tension bolts) h/td =
ft = 28.34 ksi ft = (Ff/(8 bolts))/Ab (8 tension bolts acting at one time) h/td(max) =
Fv = 21.00 ksi Fv = 21.0 from AISC Table J3.2 (for N bolts in shear) Column Stiffe
Vb = 20.90 kips/bolt Vb = Fv*Ab Fyc(use) =
Ft = 43.82 ksi Ft = SQRT(44^2-4.39*fv^2) (for N, X bolts in tension) Local Web Y
B = 43.60 kips/bolt B = Ft*Ab (for N, X bolts in tension) Pbf =
T(cap) = 348.80 kips T(cap) = B*(8 bolts) (for N, X bolts in tension) T(cap) >= Ff, O.K.Pwy =
V(cap) = 294.93 kips V(cap) = Vb*(Nb-8)+SQRT(((44*Ab*8)^2-Ff^2)/4.39) (for N, X bolts) Compressiv
V(cap) >= R, O.K.Pbf =
End Plate Design: Pwb =
Top Flange to End Plate Welding: Local Flange
Lw = 19.375 in. Lw = 2*(bf+tf)-tw Pbf =
fw = 11.634 kips/in. fw = Ff/Lw Pf =
w= 0.783 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) bp =
w(max) = 0.424 in. w(max) = 0.40*Fyb*tf/((SQRT(2)/2)*0.30*70*2) Pec =
Weld size > weld max., Fail Ca =
Increase beam size or use full-pen. weld Cb =
End Plate Required Thickness: Afc/Awc =
Bp(max) = 10.070 in. Bp(max) = bf+1" am =
Pf = 1.625 in. Pf = maximum of: D1 or S1-(D1+tf) Me =
Pb = 3.375 in. Pe = 3*db tfc(req'd) =
T = 37.57 T = Ff/(6 bolts) (assume only 6 of 8 bolts are fully effective) Pfb =
Ma = 61.05 in.-kips Ma = 2*T*(Pf/2) = T*Pf Stiff. Req'd?
tpa = 1.165 in. tpa = SQRT((6*Ma)/(Bp*(0.75*Fyp))) Column Stiffe
CF = 1.071 CF = SQRT(SQRT(g^2+Pf^2)/5) (CF = Correction Factor) Required Ar
tp(req'd) = 1.247 in. tp(req'd) = tpa*CF tp >= tp(req'd), O.K.Ps =
As(req'd) =
Beam Web to End Plate Welding: Stiffener Wid
fw = 5.562 kips/in. fw = maximum of: (0.60*Fyb)*tw/2 or R/(2*(d/2-tf)) bs(min) =
w = 0.375 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) bs(use) =
Stiffener Thi
Bearing on End Plate: ts(min) =
Fu = 58.00 ksi Fu = 58 for Fyp = 36, Fu = 65 for Fyp = 50 Stiffener Len
Rpe = 126.88 kips Rpe = 2*(0.5*Fu*(ED)*tp) (based on bolt edge distance) Ls(min) =
Rps = 1370.25 kips Rps = 2*(1.2*Fu*tp*db*(Nb/2-1)) (based on bolt spacing) Ls(use) =
Rp = 1497.13 kips Rp = Minimum of: Rpe+Rps or 1.2*Fu*tp*db*Nb Provided Are
Rp >= R, O.K. As(prov) =
Shear Stress (out of plane) on End Plate: Check Stiffe
fv = 9.02 ksi fv = Ff/(2*Bp*tp) b/t =
Fv = 14.40 ksi Fv = 0.40*Fyc Fv >= fv, O.K. b/t(max) =
Stiffener We
Ps =
(continued)
16 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
fw =
Column Web Doubler Plate Requirement: w=
Column Web Panel Shear: w(max) =
SF = 228.72 kips SF = M*12/(0.95*d) Stiffener We
tw(req'd) = 0.929 in. tw(req'd) = SF/(0.4*Fyc*dc) twc >= tw(req'd), O.K.
Ps =
Lw =
Column Web Doubler Plate: fw =
td(min) = N.A. in. td(min) = (tw(req'd)-twc)*Fyc/Fyd but not < 1/4" min. w=
w(max) =
Web Doubler Plate Welding: W27x368
Vd = N.A. kips Vd = SF*td/(td+twc) (at each vertical edge) W27x336
Lw = N.A. in. Lw = d (plate height = beam depth) W27x307
fw = N.A. kips/in. fw = Vd/Lw W27x281
w= N.A. in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) W27x258
w(max) = N.A. in. w(max) = 0.40*Fyd*td/((SQRT(2)/2)*0.30*70) W27x235
W27x217
Web Doubler Plate Plug Welding Requirements: W27x194
h/twc = N.A. h/twc = (dc-2*tfc)/twc W27x178
h/twc(max) = N.A. h/twc(max) = 380/SQRT(Fyc) W27x161
h/td = N.A. h/td = (dc-2*tfc)/td W27x146
h/td(max) = N.A. h/td(max) = 380/SQRT(Fyd) W27x129
W27x114
W27x102
Column Stiffener Requirements: (Assume Fyc = 36 ksi, per AISC Design Guide Series #4) W27x94
Local Web Yielding: Stiffeners not req'd. at both flanges if: Pbf <= Pwy W27x84
Pbf = 375.67 kips Pbf = (5/3)*Ff W24x492
Pwy = 1042.36 kips Pwy = Fyc*twc*(tf+6*k+2*tp) Pbf <= Pwy, O.K. W24x450
W24x408
Compressive Buckling of Web: W24x370
Pbf = 375.67 kips Stiffeners not required at compression flange if: Pbf <= Pwb W24x335
Pwb = 6059.69 kips Pwb = 4100*twc^3*SQRT(Fyc)/(dc-2*k) Pbf <= Pwb, O.K. W24x306
W24x279
Local Flange Bending: W24x250
Pbf = 375.67 kips Stiffeners not required at compression flange if: Pbf <= Pwb W24x229
Pf = 1.6250 in. Pf = maximum of: D1 or S1-(D1+tf) W24x207
bp = 15.938 in. bp = 2.5*(Pf+tf+Pf) (effective column flange length) W24x192
Pec = 0.531 in. Pec = (g/2)-k1-(db/4) W24x176
Ca = 1.13 Ca = 1.13 (for Fyc =36 ksi) W24x162
Cb = 1.00 Cb = 1.0 (assumed) W24x146
Afc/Awc = 1.00 Afc/Awc = 1.0 (assumed) W24x131
am = 0.937 am = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db)^(1/4) W24x117
Pfb = 2944.39 kips Pfb = ((tfc^2*(0.75*Fyc)*bp)/6)/(am*Pec/4) Pbf <= Pfb, O.K. W24x104
Conclusion: Stiffeners are not required W24x103
W24x94
W24x84
W24x76
W24x68
W24x62
W24x55
W21x402
W21x364
W21x333
(continued)
17 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
W21x275
Column Web Stiffener Design: W21x248
W21x223
Required Area of Stiffener: W21x201
Ps = N.A. kips Ps = Pbf-(Minimum of Pwy,Pwb, or Pfb) (design force) W21x182
As(req'd) = N.A. in.^2 Ast = Ps/Fys W21x166
W21x147
Stiffener Width: W21x132
bs(min) = N.A. in. bs(min) = Bp/3-twc/2 W21x122
bs(use) = N.A. in. bs(use) = bfc/2-twc/2 (rounded down to nearest whole inch) W21x111
W21x101
Stiffener Thickness: W21x93
ts(min) = N.A. in. ts(min) = larger of: tp/2 or bs(use)*SQRT(Fyc)/95 W21x83
W21x73
Stiffener Length: W21x68
Ls(min) = N.A. in. Ls(min) = dc/2-tfc W21x62
Ls(use) = N.A. in. Ls(use) = dc/2-tfc W21x57
W21x55
Provided Area of Pair of Stiffeners: W21x50
As(prov) = N.A. in.^2 As(prov) = 2*bs(use)*ts W21x48
W21x44
Check Stiffener Slenderness: W18x311
b/t = N.A. b/t = bs(use)/ts W18x283
b/t(max) = N.A. b/t(max) = 95/SQRT(Fys) W18x258
W18x234
Stiffener Welding to Column Flange: W18x211
Ps = N.A. kips Ps = Pbf-(Minimum of Pwy,Pwb, or Pfb) (design force) W18x192
Lw = N.A. in. Lw = (bfc/2-(twc/2+0.75))*4 W18x175
fw = N.A. kips/in. fw = Ps/Lw W18x158
w= N.A. in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) W18x143
w(max) = N.A. in. w(max) = 0.40*Fys*ts/((SQRT(2)/2)*0.30*70*2) W18x130
W18x119
Stiffener Welding to Column Web: W18x106
Ps = N.A. kips Ps = Pbf-(Minimum of Pwy,Pwb, or Pfb) (design force) W18x97
Lw = N.A. in. Lw = (dc/2-(k+0.25))*4 W18x86
fw = N.A. kips/in. fw = Ps/Lw W18x76
w= N.A. in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) W18x71
w(max) = N.A. in. w(max) = 0.40*Fys*ts/((SQRT(2)/2)*0.3*70*2) W18x65
W18x60
W18x55
Comments: W18x50
W18x46
W18x40
W18x35
W16x100
W16x89
W16x77
W16x67
W16x57
W16x50
W16x45
*Note: Check calculated fillet weld sizes (w) against thickness of materials being attached.
W16x36
18 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
19 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
(continued)
20 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
Bolt Tension
Results: Ab =
V=
Left Side Bolt Design: fv =
Horizontal Force at Beam Flange: Assume 1/2 of beam axial force is also taken at each flange ft =
M1t = 440.00 ft-k M1t = M1L+M1G Fv =
Ff = 225.40 kips Ff = (M1t*12)/(d-tf)+P1/2 Fv =
Vb =
Bolt Tension and Shear: Ft =
Ab = 0.9940 in.^2 Ab = p*db1^2/4 Ft =
V = 15.00 kips V = (R1/Nb1)*(8 bolts) (portion of end shear taken by 8 tension bolts) B =
fv = 1.89 ksi fv = (V/(8 bolts))/Ab (shear stress on 8 tension bolts) B=
ft = 28.34 ksi ft = (Ff/(8 bolts))/Ab (8 tension bolts acting at one time) T(cap) =
Fv = 21.00 ksi Fv = 21.0 from AISC Table J3.2 (for N bolts in shear) T(cap) =
Vb = 20.90 kips/bolt Vb = Fv*Ab V(cap) =
Ft = 43.82 ksi Ft = SQRT(44^2-4.39*fv^2) (for N, X bolts in tension) V(cap) =
B = 43.60 kips/bolt B = Ft*Ab (for N, X bolts in tension) Right Side En
T(cap) = 348.80 kips T(cap) = B*(8 bolts) (for N, X bolts in tension) T(cap) >= Ff, O.K. Top Flange t
V(cap) = 294.93 kips V(cap) = Vb*(Nb1-8)+SQRT(((44*Ab*8)^2-Ff^2)/4.39) (for N, X bolts)Lw =
V(cap) >= R1, O.K.fw =
Left Side End Plate Design: w=
Top Flange to End Plate Welding: w(max) =
Lw = 19.375 in. Lw = 2*(bf+tf)-tw End Plate R
fw = 11.634 kips/in. fw = Ff/Lw Bp2(max) =
w= 0.783 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) Pf =
w(max) = 0.424 in. w(max) = 0.40*Fyb*tf/((SQRT(2)/2)*0.30*70*2) Pb =
Weld size > weld max., Fail T=
Increase beam size or use full-pen. weld Ma =
End Plate Required Thickness: tpa =
Bp1(max) = 10.070 in. Bp1(max) = bf+1" CF =
Pf = 1.625 in. Pf = maximum of: D1 or S1-(D1+tf) tp2(req'd) =
Pb = 3.375 in. Pe = 3*db1 Beam Web t
T = 37.57 T = Ff/(6 bolts) (assume only 6 of 8 bolts are fully effective) fw =
Ma = 61.05 in.-kips Ma = 2*T*(Pf/2) = T*Pf w=
tpa = 1.165 in. tpa = SQRT((6*Ma)/(Bp1*(0.75*Fyp))) w(max) =
CF = 1.071 CF = SQRT(SQRT(g1^2+Pf^2)/5) (CF = Correction Factor) Bolt Bearing
tp1(req'd) = 1.247 in. tp1(req'd) = tpa*CF tp1 >= tp1(req'd), O.K.
Fu =
Rpe =
Beam Web to End Plate Welding: Rps =
fw = 5.562 kips/in. fw = maximum of: (0.60*Fyb)*tw/2 or R1/(2*(d/2-tf)) Rp =
w = 0.375 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) Shear Stres
fv =
Bearing on End Plate: Fv =
Fu = 58.00 ksi Fu = 58 for Fyp = 36, Fu = 65 for Fyp = 50 Column Web
Rpe = 126.88 kips Rpe = 2*(0.5*Fu*(ED1)*tp1) (based on bolt edge distance) Column Web
Rps = 1370.25 kips Rps = 2*(1.2*Fu*tp1*db1*(Nb1/2-1)) (based on bolt spacing) M1 =
Rp = 1497.13 kips Rp = Minimum of: Rpe+Rps or 1.2*Fu*tp1*db1*Nb1 M2 =
Rp >= R1, O.K. SF =
Shear Stress (out of plane) on End Plate: tw(req'd) =
fv = 9.02 ksi fv = Ff/(2*Bp1*tp1) Column Web
Fv = 14.40 ksi Fv = 0.40*Fyc Fv >= fv, O.K. td(min) =
Web Double
(continued)
21 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
Lw =
Right Side Bolt Design: fw =
Horizontal Force at Beam Flange: w=
M2t = 440.00 ft-k M2t = M2L+M2G w(max) =
Ff = 256.31 kips Ff = (M2t*12)/(d-tf)+P2/2 Web Double
Bolt Tension and Shear: h/twc =
Ab = 0.9940 in.^2 Ab = p*db2^2/4 h/twc(max) =
V = 15.00 kips V = (R2/Nb2)*(8 bolts) (portion of shear force taken by 8 tension bolts) h/td =
fv = 1.89 ksi fv = (V/(8 bolts))/Ab (shear stress on 8 tension bolts) h/td(max) =
ft = 32.23 ksi ft = (Ff/(8 bolts))/Ab (8 tension bolts acting at one time) Left Side Colu
Fv = 21.00 ksi Fv = 21.0 from AISC Table J3.2 (for N bolts in shear) Fyc(use) =
Vb = 20.90 kips/bolt Vb = Fv*Ab Local Web Y
Ft = 43.82 ksi Ft = SQRT(44^2-4.39*fv^2) (for N, X bolts in tension) Pbf1 =
B = 43.60 kips/bolt B = Ft*Ab (for N, X bolts in tension) Pwy =
T(cap) = 348.80 kips T(cap) = B*(8 bolts) (for N, X bolts in tension) T(cap) >= Ff, O.K. Compressiv
V(cap) = 280.88 kips V(cap) = Vb*(Nb2-8)+SQRT(((44*Ab*8)^2-Ff^2)/4.39) (for N, X bolts) Pbf1 =
V(cap) >= R2, O.K. Pwb =
Right Side End Plate Design: Local Flange
Top Flange to End Plate Welding: Pbf1 =
Lw = 25.700 in. Lw = 2*(bf+tf)-tw Pf =
fw = 9.973 kips/in. fw = Ff/Lw bp =
w= 0.672 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) Pec =
w(max) = 0.388 in. w(max) = 0.40*Fyb*tf/((SQRT(2)/2)*0.30*70*2) Ca =
Weld size > weld max., Fail Cb =
Increase beam size or use full-pen. weldAfc/Awc =
End Plate Required Thickness: am =
Bp2(max) = 13.300 in. Bp2(max) = bf+1" Me =
Pf = 1.700 in. Pf = maximum of: D2 or S3-(D2+tf) tfc(req'd) =
Pb = 3.375 in. Pe = 3*db2 Pfb =
T = 42.72 T = Ff/(6 bolts) (assume only 6 of 8 bolts are fully effective) Stiff. Req'd?
Ma = 72.62 in.-kips Ma = 2*T*(Pf/2) = T*Pf Right Side Co
tpa = 1.270 in. tpa = SQRT((6*Ma)/(Bp2*(0.75*Fyp))) Fyc(use) =
CF = 1.073 CF = SQRT(SQRT(g2^2+Pf^2)/5) (CF = Correction Factor) Local Web Y
tp2(req'd) = 1.363 in. tp2(req'd) = tpa*CF tp2 >= tp2(req'd), O.K.
Pbf2 =
Pwy =
Beam Web to End Plate Welding: Compressiv
fw = 5.400 kips/in. fw = maximum of: (0.60*Fyb)*tw/2 or R2/(2*(d/2-tf)) Pbf2 =
w = 0.364 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) Pwb =
Local Flange
Bearing on End Plate: Pbf2 =
Fu = 58.00 ksi Fu = 58 for Fyp = 36, Fu = 65 for Fyp = 50 Pf =
Rpe = 152.25 kips Rpe = 2*(0.5*Fu*(ED2)*tp2) (based on bolt edge distance) bp =
Rps = 1644.30 kips Rps = 2*(1.2*Fu*tp2*db2*(Nb2/2-1)) (based on bolt spacing) Pec =
Rp = 1796.55 kips Rp = Minimum of: Rpe+Rps or 1.2*Fu*tp2*db2*Nb2 Ca =
Rp >= R2, O.K. Cb =
Shear Stress (out of plane) on End Plate: Afc/Awc =
fv = 8.54 ksi fv = Ff/(2*Bp2*tp2) am =
Fv = 14.40 ksi Fv = 0.40*Fyc Fv >= fv, O.K. Me =
tfc(req'd) =
Pfb =
Stiff. Req'd?
Column Stiffe
(continued)
22 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
Ps1 =
Column Web Doubler Plate Requirement: Ps2 =
Column Web Panel Shear: Ps(max) =
M1 = 440.00 ft-k M1 = M1L+M1G As(req'd) =
M2 = 440.00 ft-k M2 = M2L-M2G Stiffener Wid
SF = 488.43 kips SF = (M1*12/(0.95*d))+(M2*12/(0.95*d)) Bp(max) =
tw(req'd) = 1.984 in. tw(req'd) = SF/(0.4*Fyc*dc) twc < tw(req'd) bs(min) =
Web doubler plate is req'd.
bs(use) =
Column Web Doubler Plate: Stiffener Thi
td(min) = 0.574 in. td(min) = (tw(req'd)-twc)*Fyc/Fyd but not < 1/4" min. tp(max) =
td < td(min), Failts(min) =
Web Doubler Plate Welding: Stiffener Len
Vd = 102.61 kips Vd = SF*td/(td+twc) (at each vertical edge) Ls(min) =
Lw = 21.40 in. Lw = d (plate height = beam depth) Ls(use) =
fw = 4.79 kips/in. fw = Vd/Lw Provided Are
w = 0.323 in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) As(prov) =
w(max) = 0.364 in. w(max) = 0.40*Fyd*td/((SQRT(2)/2)*0.30*70) Check Stiffe
Weld size <= weld max., O.K. b/t =
Web Doubler Plate Plug Welding Requirements: b/t(max) =
h/twc = 8.92 h/twc = (dc-2*tfc)/twc Stiffener We
h/twc(max) = 63.33 h/twc(max) = 380/SQRT(Fyc) h/twc <= h/twc(max), O.K.Ps(max) =
h/td = 33.55 h/td = (dc-2*tfc)/td Lw =
h/td(max) = 63.33 h/td(max) = 380/SQRT(Fyd) h/td <= h/td(max), O.K. fw =
Conclusion: Plug welds are not required w=
w(max) =
Left Side Column Stiffener Requirements: (Assume Fyc = 36 ksi, per AISC Design Guide Series #4) Stiffener We
Local Web Yielding: Stiffeners not req'd. at both flanges if: Pbf1 <= Pwy Ps(max) =
Pbf1 = 375.67 kips Pbf1 = (5/3)*Ff Lw =
Pwy = 1042.36 kips Pwy = Fyc*twc*(tf+6*k+2*tp1) Pbf1 <= Pwy, O.K. fw =
w=
Compressive Buckling of Web: w(max) =
Pbf1 = 375.67 kips Stiffeners not required at compression flange if: Pbf1 <= Pwb W18x119
Pwb = 6059.69 kips Pwb = 4100*twc^3*SQRT(Fyc)/(dc-2*k) Pbf1 <= Pwb, O.K. W18x106
W18x97
Local Flange Bending: W18x86
Pbf1 = 375.67 kips Stiffeners not required at compression flange if: Pbf1 <= Pwb W18x76
Pf = 1.6250 in. Pf = maximum of: D1 or S1-(D1+tf) W18x71
bp = 15.938 in. bp = 2.5*(Pf+tf+Pf) (effective column flange length) W18x65
Pec = 0.531 in. Pec = (g1/2)-k1-(db1/4) W18x60
Ca = 1.13 Ca = 1.13 (for Fyc =36 ksi) W18x55
Cb = 1.00 Cb = 1.0 (assumed) W18x50
Afc/Awc = 1.00 Afc/Awc = 1.0 (assumed) W18x46
am = 0.937 am = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db1)^(1/4) W18x40
Pfb = 2944.39 kips Pfb = ((tfc^2*(0.75*Fyc)*bp1)/6)/(am*Pec/4) Pbf1 <= Pfb, O.K. W18x35
Conclusion: Stiffeners are not required W16x100
W16x89
W16x77
W16x67
W16x57
W16x50
W16x45
W16x40
(continued)
23 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
W16x31
Right Side Column Stiffener Requirements: (Assume Fyc = 36 ksi, per AISC Design Guide Series #4)W16x26
Local Web Yielding: Stiffeners not req'd. at both flanges if: Pbf2 <= Pwy W14x808
Pbf2 = 427.18 kips Pbf2 = (5/3)*Ff W14x730
Pwy = 1063.93 kips Pwy = Fyc*twc*(tf+6*k+2*tp2) Pbf2 <= Pwy, O.K. W14x665
W14x605
Compressive Buckling of Web: W14x550
Pbf2 = 427.18 kips Stiffeners not required at compression flange if: Pbf2 <= Pwb W14x500
Pwb = 6059.69 kips Pwb = 4100*twc^3*SQRT(Fyc)/(dc-2*k) Pbf2 <= Pwb, O.K. W14x455
W14x426
Local Flange Bending: W14x398
Pbf2 = 427.18 kips Stiffeners not required at compression flange if: Pbf2 <= Pwb W14x370
Pf = 1.7000 in. Pf = maximum of: D2 or S3-(D2+tf) W14x342
bp = 16.013 in. bp = 2.5*(Pf+tf+Pf) (effective column flange length) W14x311
Pec = 0.531 in. Pec = (g2/2)-k1-(db2/4) W14x283
Ca = 1.13 Ca = 1.13 (for Fyc =36 ksi) W14x257
Cb = 1.00 Cb = 1.0 (assumed) W14x233
Afc/Awc = 1.00 Afc/Awc = 1.0 (assumed) W14x211
am = 0.937 am = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db2)^(1/4) W14x193
Pfb = 2958.25 kips Pfb = ((tfc^2*(0.75*Fyc)*bp2)/6)/(am*Pec/4) Pbf2 <= Pfb, O.K. W14x176
Conclusion: Stiffeners are not required W14x159
W14x145
Column Web Stiffener Design: W14x132
Required Area of Stiffener: W14x120
Ps1 = N.A. kips Ps1 = Pbf1-(Minimum of Pwy,Pwb, or Pfb) W14x109
Ps2 = N.A. kips Ps2 = Pbf2-(Minimum of Pwy,Pwb, or Pfb) W14x99
Ps(max) = N.A. kips Ps(max) = max. of: Ps1 or Ps2 W14x90
As(req'd) = N.A. in.^2 Ast = Ps(max)/Fys W14x82
W14x74
Stiffener Width: W14x68
Bp(max) = N.A. Bp(max) = max. of: Bp1 or Bp2 W14x61
bs(min) = N.A. in. bs(min) = Bp(max)/3-twc/2 W14x53
bs(use) = N.A. in. bs(use) = bfc/2-twc/2 (rounded down to nearest whole inch) W14x48
W14x43
Stiffener Thickness: W14x38
tp(max) = N.A. in. tp(max) = max. of: tp1 or tp2 W14x34
ts(min) = N.A. in. ts(min) = larger of: tp(max)/2 or bs(use)*SQRT(Fyc)/95 W14x30
W14x26
Stiffener Length: W14x22
Ls(min) = N.A. in. Ls(min) = dc/2-tfc W12x336
Ls(use) = N.A. in. Ls(use) = dc-2*tfc W12x305
W12x279
Provided Area of Pair of Stiffeners: W12x252
As(prov) = N.A. in.^2 As(prov) = 2*bs(use)*ts W12x230
W12x210
Check Stiffener Slenderness: W12x190
b/t = N.A. b/t = bs(use)/ts W12x170
b/t(max) = N.A. b/t(max) = 95/SQRT(Fys) W12x152
W12x136
W12x120
W12x106
W12x96
(continued)
24 of 25 06/14/2017 08:33:38
"ENDPLMC9.xls" Program
Version 1.0
W12x79
Column Web Stiffener Design (continued): W12x72
Stiffener Welding to Column Flange: W12x65
Ps(max) = N.A. kips Ps(max) = max. of: Ps1 or Ps2 W12x58
Lw = N.A. in. Lw = (bfc/2-(twc/2+0.75))*4 W12x53
fw = N.A. kips/in. fw = Ps(max)/Lw W12x50
w= N.A. in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) W12x45
w(max) = N.A. in. w(max) = 0.40*Fys*ts/((SQRT(2)/2)*0.30*70*2) W12x40
W12x35
Stiffener Welding to Column Web: W12x30
Ps(max) = N.A. kips Ps(max) = max. of: Ps1 or Ps2 W12x26
Lw = N.A. in. Lw = (dc-2*(k+0.25))*4 W12x22
fw = N.A. kips/in. fw = Ps(max)/Lw W12x19
w= N.A. in. (size*) w = fw/((SQRT(2)/2)*(0.30*70)) W12x16
w(max) = N.A. in. w(max) = 0.40*Fys*ts/((SQRT(2)/2)*0.3*70*2) W12x14
W10x112
W10x100
W10x88
Comments: W10x77
W10x68
W10x60
W10x54
W10x49
W10x45
W10x39
W10x33
W10x30
W10x26
W10x22
W10x19
W10x17
W10x15
W10x12
W8x67
W8x58
W8x48
W8x40
W8x35
W8x31
W8x28
W8x24
W8x21
W8x18
W8x15
W8x13
W8x10
W6x25
W6x20
W6x16
W6x15
W6x12
*Note: Check calculated fillet weld sizes (w) against thickness of materials being attached.
W6x8.5
25 of 25 06/14/2017 08:33:38