Professional Documents
Culture Documents
description/ordering information
The NE5534 and NE5534A are high-performance operational amplifiers combining excellent dc and ac
characteristics. Some of the features include very low noise, high output drive capability, high unity-gain and
maximum-output-swing bandwidths, low distortion, and high slew rate.
These operational amplifiers are internally compensated for a gain equal to or greater than three. Optimization
of the frequency response for various applications can be obtained by use of an external compensation
capacitor between COMP and COMP/BAL. The devices feature input-protection diodes, output short-circuit
protection, and offset-voltage nulling capability.
For the NE5534A, a maximum limit is specified for equivalent input noise voltage.
ORDERING INFORMATION
VIOmax ORDERABLE TOP-SIDE
TA PACKAGE
AT 25C PART NUMBER MARKING
Tube of 50 NE5534P NE5534P
PDIP (P)
Tube of 50 NE5534AP NE5534AP
Tube of 75 NE5534D
NE5534
0C to 70C 4 mV Reel of 2500 NE5534DR
SOIC (D)
Tube of 75 NE5534AD
5534A
Reel of 2500 NE5534ADR
SOP (PS) Reel of 2000 NE5534PS N5534
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available
at www.ti.com/sc/package.
symbol
COMP
COMP/BAL
IN
OUT
IN+ +
BALANCE
PRODUCTION DATA information is current as of publication date. Copyright 2003, Texas Instruments Incorporated
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
schematic
BALANCE COMP/BAL COMP
1 8 5 7
VCC+
100 pF 12 k 12 k
IN+
3
40 pF
15
6
2 OUT
IN
12 pF 7 pF 15
4
VCC
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage: VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V
VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V
Input voltage either input (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC+
Input current (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Duration of output short circuit (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Package thermal impedance, JA (see Notes 5 and 6): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97C/W
P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85C/W
PS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 95C/W
Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C
Lead temperature range 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . 260C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65C to 150C
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC.
2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage.
3. Excessive current will flow if a differential input voltage in excess of approximately 0.6 V is applied between the inputs unless some
limiting resistance is used.
4. The output may be shorted to ground or to either power supply. Temperature and/or supply voltages must be limited to ensure the
maximum dissipation rating is not exceeded.
5. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability.
6. The package thermal impedance is calculated in accordance with JESD 51-7.
TYPICAL CHARACTERISTICS
1.6 30
VCC = 15 V CC = 0
1.4 Offset 25
1.2 20
Bias
1 15
0.8 10
CC = 22 pF
0.6
5
VO(PP)
VCC = 15 V CC = 47 pF
TA = 25C
0.4 0
75 50 25 0 25 50 75 100 125 100 1k 10 k 100 k 1M
TA Free-Air Temperature C f Frequency Hz
Figure 1 Figure 2
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
TYPICAL CHARACTERISTICS
VCC = 15 V
103 0.8
CC = 0 pF
0.7
102 Slew Rate
0.6
CC = 22 pF
10
0.5
1 0.4
10 100 1k 10 k 100 k 1 M 10 M 100 M 0 5 10 15 20
f Frequency Hz | VCC | Supply Voltage V
Figure 3 Figure 4
VCC = 15 V
AVD = 1
0.007
THD Total Harmonic Distortion %
VI(rms) = 2 V
TA = 25C
1.1
Slew Rate
Unity-Gain 0.004
Bandwidth
1
0.002
0.9
0.8 0.001
75 50 25 0 25 50 75 100 125 100 400 1k 4k 10 k 40 k 100 k
TA Free-Air Temperature C f Frequency Hz
Figure 5 Figure 6
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
TYPICAL CHARACTERISTICS
SE5534, NE5534
2
4
SE5534A, NE5534A 1
SE5534, NE5534
0.7
2 0.4
SE5534A, NE5534A
0.2
1 0.1
10 100 1k 10 k 100 k 10 100 1k 10 k 100 k
f Frequency Hz f Frequency Hz
Figure 7 Figure 8
70
TA = 25C
40
20
10
7
4
f = 10 Hz to 20 kHz
2
1
0.7
0.4
f = 200 Hz to 4 kHz
0.2
0.1
100 1k 10 k 100 k 1M
RS Source Resistance
Figure 9
0.400 (10,16)
0.355 (9,00)
8 5
0.280 (7,11)
0.245 (6,22)
1 4
0.065 (1,65)
0.045 (1,14)
0.023 (0,58)
015
0.015 (0,38)
0.100 (2,54) 0.014 (0,36)
0.008 (0,20)
4040107/C 08/96
0.400 (10,60)
0.355 (9,02)
8 5
0.260 (6,60)
0.240 (6,10)
1 4
0.070 (1,78) MAX
0.325 (8,26)
0.020 (0,51) MIN
0.300 (7,62)
0.015 (0,38)
Gage Plane
0.200 (5,08) MAX
Seating Plane
4040082/D 05/98
0.020 (0,51)
0.050 (1,27) 0.010 (0,25)
0.014 (0,35)
8 5
Gage Plane
1 4 0.010 (0,25)
A 0 8
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.010 (0,25)
0.069 (1,75) MAX 0.004 (0,10)
0.004 (0,10)
PINS **
8 14 16
DIM
4040047/E 09/01
1,27
0,51
0,25 M
0,35
8 5
0,15 NOM
5,60 8,20
5,00 7,40
Gage Plane
1 4 0,25
6,50
0 8 0,95
5,90
0,55
Seating Plane
4040063 / B 02/95
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TIs terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TIs standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding thirdparty products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
www.datasheetcatalog.com