Professional Documents
Culture Documents
DC/*-SP
DC/* AND SP
Motorola's STARLINE Directional Coupler and Splitter
are used with our Mini-Bridger series amplifier. Purpose
Motorola's STARLINE Directional Coupler
of the device is to activate and direct ports 3 and 4 in and Splitter are used with our Mini-Bridger
the amplifier. The MB amplifier is shipped with a jumper
installed, which will only activate one port, 3 or 4. series amplifier.
These models are used in the SG1000 optical node to
activate ports 2 or 3.
1 Insert a flat-blade screwdriver into the slot on the side of the cover and
rotate in either direction to slightly spread the side wall of the cover, as
illustrated in Figure 1.
2 Grasp the DC/* or SP board at a point near the screwdriver and pull it away
from the plastic cover.
3 Use your fingers to insert the DC/* or SP board into the amplifier. Both
boards are completely compatible with all previous MB*/* models.
Figure 1
Removing the ergonomic cover
SPECIFICATIONS
DC/* and SP
PARAMETER UNIT DC/8 DC/10 DC/12 SP
Passband MHz 870 870 870 870
Flatness dB 0.5 0.5 0.5 0.5
Insertion Loss dB 8.5 10.5 12.5 4.5
Return Loss dB 18 18 18 18
Motorola, Inc.
Broadband Communications Sector
101 Tournament Drive MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office.
Horsham, PA 19044 All other product or service names are the property of their respective owners. Motorola, Inc. 2002.
1.800.523.6678
www.motorola.com/broadband 08/01/02 Rev 0