You are on page 1of 12

BOSCO ALUMINIUM & GLASS CO ( L L C)

DESIGN SHEET
Date: 1/12/2010
Ref No: RM BBY CP 01
PROJECT: 4B+G+3P+19 flr COMM/OFFICE BLDG
LOCATION: BUSINESS BAY , DUBAI
CLIENT: Mr. MOHAMAD ABDULLAH AL SAYYAH
CONSULTANT: AL ASRI ENG. CONSULTANT
MAIN CONTRACTOR M/S. S.S. LOOTAH CONTRACTING CO.
TITLE: STRUCTURAL DESIGN FOR ROOF CANOPY

1 Scope:
To provide Structural design for the Roof canopy
The structural analysis & Design check is done using STAAD.Pro software as per British standard codes.

2 Design Criteria

a Design codes
i). BS- 5950: Part- I ; 2000

ii). BS- 6399: Part- 2, 1997

iii). BS- 6399: Part- 3, 1988

b Material Properties

i) Steel grade S-275 is used

Design strength of steel py. = 275 N/mm2

Modulus of Elasticity E = 205000 N/mm2

Density of Aluminium = 7650 kg/ m3.

ii) Steel sections used

1) UB 356 x 171 x 45
2) Steel box 100x150x4mm
3) Aluminium box 100x150x3mm

3 Deflection criteria

For cantilever beams = Length / 180

Other beams = Span / 200

Page 1 of 12
BOSCO ALUMINIUM & GLASS CO ( L L C)

DESIGN SHEET
Date: 1/12/2010
Ref No: RM BBY CP 01
PROJECT: 4B+G+3P+19 flr COMM/OFFICE BLDG
LOCATION: BUSINESS BAY , DUBAI
CLIENT: Mr. MOHAMAD ABDULLAH AL SAYYAH
CONSULTANT: AL ASRI ENG. CONSULTANT
MAIN CONTRACTOR M/S. S.S. LOOTAH CONTRACTING CO.
TITLE: STRUCTURAL DESIGN FOR ROOF CANOPY

4 Load Calculations

i) Wind load calculation ( reference 6399; Part-2, unless stated otherwise)


Stage 1 Dynamic Augmentation factor (Cr) (1.6.1)

Building Ht H = 85 m
Building type factor = 2 ( table-1)
Cr = 0.17

Stage 2 Check for limit applicability (1.6.2) = Cr< 0.14, H < 300

Stage 3 Basic wind speed Vb = 25 m/sec

Stage 4 Site win speed Vs (2.2.2)

Here for calculation purpose the value for Altitude factor Sa, Directional factor Sd,

Page 2 of 12
BOSCO ALUMINIUM & GLASS CO ( L L C)

DESIGN SHEET
Date: 1/12/2010
Ref No: RM BBY CP 01
PROJECT: 4B+G+3P+19 flr COMM/OFFICE BLDG
LOCATION: BUSINESS BAY , DUBAI
CLIENT: Mr. MOHAMAD ABDULLAH AL SAYYAH
CONSULTANT: AL ASRI ENG. CONSULTANT
MAIN CONTRACTOR M/S. S.S. LOOTAH CONTRACTING CO.
TITLE: STRUCTURAL DESIGN FOR ROOF CANOPY

seasonal factor Ss & Probability factor Sp are taken as = 1

Site wind speed Vs = Vb x Sa x Sd x Ss x Sp


= 25 m/sec

Stage 5 Terrain categories for effective height

effective ht taken as He = 85 M

Stage 6 Method used (Standard / Directional) : Standard method

Stage 7 Standard Effective Wind speed ( 2.2.3)

Ve = Vs x Sb , Sb = 2.096 Terrain factor Corresponding to He form table-4


= 52.40 m/sec

Page 3 of 12
BOSCO ALUMINIUM & GLASS CO ( L L C)

DESIGN SHEET
Date: 1/12/2010
Ref No: RM BBY CP 01
PROJECT: 4B+G+3P+19 flr COMM/OFFICE BLDG
LOCATION: BUSINESS BAY , DUBAI
CLIENT: Mr. MOHAMAD ABDULLAH AL SAYYAH
CONSULTANT: AL ASRI ENG. CONSULTANT
MAIN CONTRACTOR M/S. S.S. LOOTAH CONTRACTING CO.
TITLE: STRUCTURAL DESIGN FOR ROOF CANOPY

Stage 8 Dynamic Pressure qs (2.1.2)

qs = 0.613 Ve2 Kpa


= 1683.2 N/M 2

= 1.68 KN/M2

Stage 9 Standard Pressure co-efficient (2.3 ~ 2.7)

Net Pressure co-efficient for Long element Cp = 2


2.7.2.1, Table 2)

Wind load
Net pressure acting on the surface p = qs Cp Ca
qs. = 1.68 KN/M2
Cp = 2.2
Ca = 1

Net pressure acting on the surface p = 1.68 x 2.2 x 1

= 3.7 KN/M2

Page 4 of 12
BOSCO ALUMINIUM & GLA

PROJECT: Headquarters, Residential & Commercial Complex (M/s.EMKE Group).


LOCATION: Abudhabi
CLIENT: M/s. EMKE Group
CONSULTANT: M/s. AL SALAM
MAIN CONTRCTOR: M/s. ALI & SONS
TITLE: Structural Analysis & Design for steel frame for Roof Mast

Calculation of imposed loads

Imposed load on roof with no access( 6399- 3; 1988) =


load ating on one member = 0.6 x 1.5 x
2
Udl on the member

= 0.9 1.5

Load factor provided ( Arbitray) = 1.25

Factored load = 0.75 Kn/m


1.5m

2m
SCO ALUMINIUM & GLASS CO ( L L C)

DESIGN SHEET
Date:
Ref No:
E Group).

0.6KN/m2
2 = 0.9 KN

= 0.6 KN/M
PROJECT: SHATAH TOWER - 2B + G + 9P BUILDING

DESIGN OF STEEL SUPPORTING SYSTEM FOR CRADLE

CLIENT: AL SAYYAH INVESTMENT

DESIGN & INSTALLATION BY:


CONTENTS
1 Scope 1
2 Design criteria 1
3 Deflection criteria 2
4 Load calculations 2 ~7
5 Check for deflection 8
6 Design of End connections 9~11
8 Design of bracket 12
9 STAAD Data sheet

You might also like