Professional Documents
Culture Documents
Technologies
Finishing
Coating by means of floating knife or knife-over-cylinder
Functionalizing and impregnating via dosing roll or screen
technique
Straightening (only for textile applications)
Drying and cross-linking
Heat-setting of synthetic fabric
Laminating and crushing of coated fabric
Photo: Trans-Textil GmbH
Finishing padder
For woven fabric
Deep-submersion trough
Bow and scroll roller
Different linear pressures can be set
Hardness 85 shore
Coating unit
floating knife, applied quantity 5 to 50 g/m dry (+/- 5%)
(paste or foam coating for example for sailing cloth,
canvas, upholstery fabric, abrasive cloth, airbag,
hometextiles) 3D illustration of the finishing padder
knife-over-cylinder, applied quantity 50 to 1000 g/m
(+/- 5%)
(paste or foam coating for example for blackouts, sport
and protective clothing, heat protection material, adhe-
sive application for laminating, fashion effects)
dosing roll, applied quantity 2 to 10 g/m (+/- 10%)
(one-side minimum application of aqueous solutions,
forexample for water and dirt-repellent fabric)
screen, applied quantity 10 bis 100 g/m (+/- 10%)
(one-side minimum application of aqueous solutions,
pastes or foams, for example to print uni-colour decor or
minimum application on distortion sensitive fabric)
coating unit with floating knife
Foam generator
Dynamic foam generators
Stable, meta-stable and instable foams
Foaming of the coating mass up to approx. 30 g/l
Conveyed quantity 12 to 200 kg/h
Pressure lamination Gap lamination Air lamination crushing and laminating calender integrated into the line