Professional Documents
Culture Documents
Hotfix 8 (K5.5.4.8) for STEP 7 V5.5 SP4 Programming software for SIMATIC
S7 / M7 / C7
Security Information:
In addition to the Readme file for STEP 7 V5.5 SP4, note the following regarding statements on
security:
Devices connected to an enterprise network or directly to the internet must be appropriately
protected against unauthorized access, e.g. by use of firewalls and network segmentation. For
more information about industrial security, please visit http://www.siemens.com/industrialsecurity.
Contents
Installation notes
1 Contents of the Consignment
2 Hardware Requirements
3 Software Requirements
4 Installation
Installation Notes
These installation notes contain important information that you need for the Hotfix installation.
Please read these notes before the installation.
2 Hardware Requirements
No changes compared with STEP 7 V5.5 SP4.
3 Software Requirements
4 Installation
Start the file "*.exe" of Hotfix 8 for STEP 7 V5.5 SP4. The files will then be copied to the PLC/PC
and entries will be made in MS Windows files. Operating instructions will be given to you during
setup. The drive onto which you install Hotfix 8 for STEP 7 V5.5 SP4 will be determined by the
installed STEP 7 version.
NCM
The export of WinCC tags from the OPC server for SNMP configurations has been
improved.
The configuration of ASi modules has been improved.
With operation on a PROFIBUS CP443-5, the behavior of DP/ASI-Link modules after
station recovery has been improved specifically for analog ASi slaves.
NetPro
If subprojects are not available during compilation of the configuration because they have
been swapped out for editing, messages resulting from this are no longer output as
errors, but rather only as warnings.
The configuration of H-CPUs in stand-alone operation has been improved.
The CiR capability has been improved particularly after executing the function "Download
the selected station".
The configuration of fault-tolerant S7 connections has been improved.
SIMATIC Manager
The performance when archiving multiprojects has been improved.
The "Save as > Rearrange before saving (slow)" function was improved for projects that
do not contain installed option packages.
Print Function
As of this Hotfix: The problem with the signature during printing, especially of CFC charts,
has been corrected.
Topology Editor
As of this Hotfix: The display of the cable lengths in the online table view of the topology
editor has been improved.
As of this Hotfix: Tool tip display for documentation lines has been improved.