You are on page 1of 28

D EUTSCHE NORM February 2003

Steel tubes for precision applications


Technical delivery conditions {
Part 1: Seamless cold drawn tubes
English version of DIN EN 10305-1 EN 10305-1
ICS 77.140.75 Supersedes DIN 2391-1 and
DIN 2391-2, September 1994
Przisionsstahlrohre Technische Lieferbedingungen editions.
Teil 1: Nahtlose kaltgezogene Rohre

European Standard EN 10305-1 : 2002 has the status of a DIN Standard.

A comma is used as the decimal marker.

National foreword
This standard has been prepared by ECISS/TC 29.
The responsible German body involved in the preparation of this standard was the Normenausschuss Eisen
und Stahl (Steel and Iron Standards Committee), Technical Committee Przisionsstahlrohre.
DIN V 17006-100 is the standard corresponding to CEN Technical Report CR 10260 referred to in clause 2
of the EN.

Amendments
DIN 2391-1 and DIN 2391-2, September 1994 editions, have been superseded by the specifications of
EN 10305-1.

Previous editions
DIN 2385: 1993-12; DIN 2385-1: 1940-6, 1943-12, 1957-07; DIN 2391: 1932-04; DIN 2391-1: 1940-06,
1957-11, 1965-11, 1981-07, 1994-09; DIN 2391-2: 1940-06, 1957-11, 1967-07, 1981-07, 1994-09.

National Annex NA
Standard referred to
(and not included in Normative references and Bibliography)
DIN V 17006-100 Designation systems for steel Additional symbols for steel names

Continued overleaf.
EN comprises 26 pages.

No part of this standard may be reproduced without the prior permission of Ref. No. DIN EN 10305-1 : 2003-02
DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, English price group 13 Sales No. 1113
has the exclusive right of sale for German Standards (DIN-Normen).
04.03
EN 10305-1

November 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

ICS 77.140.75

English version

Steel tubes for precision applications


Technical delivery conditions
Part 1: Seamless cold drawn tubes

Tubes de prcision en acier Condi- Przisionsstahlrohre Technische


tions techniques de livraison Partie 1: Lieferbedingungen Teil 1: Nahtlose
Tubes sans soudure tirs froid kaltgezogene Rohre

This European Standard was approved by CEN on 2002-10-02.


CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national stand-
ards may be obtained on application to the Management Centre or to any
CEN member.
The European Standards exist in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a
CEN member into its own language and notified to the Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, the Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzer-
land, and the United Kingdom.


European Committee for Standardization
Comit Europen de Normalisation
Europisches Komitee fr Normung

Management Centre: rue de Stassart 36, B-1050 Brussels

2002. CEN All rights of exploitation in any form and by any means Ref. No. EN 10305-1 : 2002 E
reserved worldwide for CEN national members.
Page 2
EN 10305-1 : 2002

3
4
4
5
5
5
5
5
6
6
6
7
7
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

7
7
8
8
8
9
10
11
16
16
16
17
18
18
18
18
18
19
19
19
20
20
20
Page 3
EN 10305-1 : 2002

20
20
20
21

25
26
EN 10305-1 : 2002
Page 4
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 5
EN 10305-1 : 2002

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 6
EN 10305-1 : 2002
Page 7
EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 8
EN 10305-1 : 2002

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 9
EN 10305-1 : 2002
EN 10305-1 : 2002
Page 10

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 11
EN 10305-1 : 2002
Page 12
EN 10305-1 : 2002

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 13
EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
EN 10305-1 : 2002
Page 14
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
EN 10305-1 : 2002
Page 15

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
EN 10305-1 : 2002
Page 16
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 17
EN 10305-1 : 2002

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
EN 10305-1 : 2002
Page 18

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 19
EN 10305-1 : 2002
Page 20
EN 10305-1 : 2002
EN 10305-1 : 2002
Page 21

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
EN 10305-1 : 2002
Page 22

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 23
EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 24
EN 10305-1 : 2002

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 25
EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 26
EN 10305-1 : 2002

You might also like