Professional Documents
Culture Documents
1. Create a directory on the hard disk, outside of the Oracle base directory, to hold
the Oracle software:
2. $ mkdir OraDb12c
4. $ cd OraDb12c
Some platforms automatically mount the disk when you insert it into the drive. If
the disk does not mount automatically, see the "Mounting Disks" section for
platform-specific information.
6. Copy the contents of the mounted disk to the corresponding new subdirectory as
follows:
7. $ cp -R /directory_path OraDb12c
1. Log on as the Oracle software owner user (typically, oracle) to the computer on
which you want to install Oracle components.
2. If you are installing the software from installation media, mount the disk if it is
not mounted.
If the disk does not mount automatically, see the "Mounting Disks" section for
platform-specific information.
Some platforms automatically mount the disk when you insert the installation
media into the drive.
3. To start Oracle Universal Installer, complete one of the following steps depending
on the location of the installation files:
4. If the installation files are on installation media, enter commands similar to the
following, where directory_path is the path of the database directory on the
installation media:
$ /directory_path/runInstaller
If the installation files are on the hard disk, change the directory to
the database directory and enter the following command:
$ ./runInstaller
5. When the configuration assistant tasks are complete click finish, click Exit, then
click Yes to exit from Oracle Universal Installer.
6. During the database installation, when Oracle Universal Installer prompts you to
run a script with root privileges, enter a command similar to the following in a
terminal where you are logged in as the root user, then click OK:
7. # /script_path/script_name
For more information see the description in the Install Product screen in the table
that follows.
8. See Chapter 7 for information about tasks that you must complete after you
install Oracle Database.
The following table lists the various screens displayed during an Enterprise Edition
installation for Oracle Database 12c:
Enter your email address, preferably your My Oracle Support email address or user
name in the Email field.
Select the I wish to receive security updates via My Oracle Support check box to
receive security updates.
Enter your My Oracle Support password in the My Oracle Support Password field.
Click Next.
Create and configure a database: This option creates a new database with
sample schemas.
Install database software only: This option only installs the database binaries. To
configure the database, you must run Oracle Database Configuration Assistant
after the software installation.
Upgrade an existing database: This option installs the software binaries in a new
Oracle home. After the installation, you can upgrade the existing database.
Select the type of system for installing the database, and click Next.
Desktop Class: Select this option if you are installing on a laptop or desktop class
system. This option includes a starter database and enables a minimal
configuration. This option is designed for those who want to get the database
running quickly.
Server Class: Select this option if you are installing on a server class system,
such as what you would use when deploying Oracle Database in a production
data center. This option provides more advanced configuration options. Advanced
configuration options available using this option include Oracle RAC, Oracle ASM,
backup and recovery configuration, integration with Oracle Enterprise Manager
Cloud Control, and more fine-grained memory tuning, among many others.
Select the type of database installation you want to perform, and click Next.
Single instance database installation: This option installs the database and the
listener.
Oracle Real Application Clusters database installation: This option installs Oracle
Real Application Clusters.
Oracle RAC One Node database installation: This option installs the Oracle RAC
One Node database.
Typical Install: This installation method is selected by default. It lets you quickly
install Oracle Database using minimal input. It installs the software and optionally
creates a general-purpose database using the information that you specify on
this screen.
Advanced Install: This installation method enables you to perform more complex
installations, such as creating individual passwords for different accounts,
creating specific types of starter databases (for example, for transaction
processing or data warehouse systems), using different language groups,
specifying email notifications, and so on.
This option enables you to select the language in which you want to run the product.
Select the product language from the Available Languages list, and move it to the
Selected Languages list. Click Next.
Screen7: Select Database Edition:-
Select Enterprise Edition, Standard Edition, Standard Edition One, or Standard Edition 2.
Click Next.
See Also: "Enabling and Disabling Database Options" for information about enabling
and disabling components that are installed with Oracle Database.
The Oracle base path appears by default. You can change this path based on your
requirement. Specify Oracle Base, Software Location, and click Next.
The Oracle base directory is a top-level directory for Oracle software installations owned
by an Oracle installation owner account. The default Oracle base path
is mountpoint/app/user, where user is the user account running the installation. You can
change the path based on your requirements.
In the Software Location field, accept the default value or enter the Oracle home
directory path in which you want to install the Oracle software.The directory path must
not contain spaces. Click Next.
Ensure that the Oracle home path for the database home and the Oracle base path use
only ASCII characters. At the time of this release, the use of non-ASCII characters for an
Oracle database home or Oracle base is not supported.
This screen is displayed if this is the first time you are installing Oracle software on your
system.
You are prompted by Oracle Universal Installer to specify the Inventory Directory path
for the central inventory the first time you install any Oracle software on your computer.
Select the oraInventory Group Name of the operating system group that will own the
Oracle Inventory directory (the Oracle Inventory group).
Click Next.
Note: By default, the Oracle Inventory directory is not installed under the Oracle Base
directory. This is because all Oracle software installations share a common Oracle
Inventory, so there is only one Oracle Inventory for all users, whereas there is a
separate Oracle Base directory for each user.
Database Naming
db_unique_name.db_domain
db_domain is the computer environment used for the database. It can contain no
more than 128 characters (alphanumeric, underscore (_), and pound sign (#)),
inclusive of all periods.
Memory:
Select the Enable Automatic Memory Management option to allow the database to
automatically distribute memory between SGA and PGA. If you do not select this option,
then the SGA and PGA must be sized manually.
Character Sets:
This option enables you to store the character data in the database in one of the
following methods:
Use the default: This option uses the operating system language settings.
Use Unicode: This option enables you to store multiple language groups
Choose from the following list of character sets: This option enables the Select
Database Character Set drop down list.
This screen gives you the option to manage your database using Oracle Enterprise
Manager Cloud Control. Select Register with Enterprise Manager (EM) Cloud
Control and specify the following for Oracle Enterprise Manager Cloud Control
configuration, and click Next:
OMS Host: The system name where the Management repository is running.
OMS Port: The Oracle Enterprise Manager port number to receive requests from
the Management service.
Specify password of ASMSNMP user: The password for the ASMSNMP user
configured in Oracle ASM, required only if you choose Oracle ASM as your
database storage option.
Select Enable Recovery to enable recovery using one of the following options:
Select File System to use a file system directory for the fast recovery area, and
then specify the fast recovery area path in the Recovery Area location field.
Click Next.
This screen is displayed only if you select Oracle Automatic Storage Management as
your storage option in the Specify Storage Option screen.
Disk groups are created during the Oracle Grid Infrastructure installation. Disk groups
are configured with the SYSASM privilege using asmcmd or SQL create
diskgroup commands. An ASM disk group consists of multiple disk partitions.
The table in this screen displays existing disk groups created during the Oracle Grid
Infrastructure installation. Select the disk group to use for database file storage.
Enter and confirm passwords for the privileged database accounts: SYS, SYSTEM, and
DBSNMP.
If you chose to create the database as a CDB, then Oracle Universal Installer also asks
for the PDBADMIN password.
Click Next.
The operating system groups are selected by default. You can also manually select
the OSDBA and OSOPER groups.
Click Next.
This option verifies that the minimum system requirements to perform the database
installation are met.
If you click Check Again, then you can run the prerequisite check again to see if the
minimum requirements are met to carry on with the database installation.
Click Fix & Check Again, if you want the installer to fix the problem and verify the
system requirements again.
Note: The Fix & Check Again option generates a script that you must run as
the root user. This generated script sets some system parameters to Oracle-
recommended values. Oracle recommends that you do not modify the contents of this
script.
To get a list of failed requirements, select ShowFailed from the list. To get a list of all
the prerequirement checks run by Oracle Universal Installer, select Show All. To get a
list of the prerequirement checks that are successful, select Show Succeeded.
Note: Oracle recommends that you use caution when selecting the Ignore All option. If
you select this option, then Oracle Universal Installer may not confirm that your system
can install Oracle Database successfully.
Screen20: Summary:-
Note: You can save all the installation steps into a response file by clicking Save
Response File. Later, this file can be used for a silent installation.
This screen displays the progress of a database installation. During this process, the
Execute Configuration Scripts window appears. Do not click OK until you run
the root.sh and, if required, the orainstRoot.sh configuration scripts mentioned in this
screen as the root user. Click Next.
This screen then displays the status information for the configuration assistants that
configure the software and create a database.
Note: If this is the first time you are installing Oracle software on your system,
then Oracle Universal Installer prompts you to run the orainstRoot.sh script
From the OBIEE Media package, goto rcu home/bin and run the rcu.sh
file
# rcu_home/bin ./rcu.sh
>Password:**User password
>Role:**sysdba
Clik on Next..
-Create a new prefix for the Schema and select the component as
shown below:
-Click on Create
-Specify a directory for the Middleware home. The other fields will auto-fill
with default values
>Oracle Middleware home(Give the path where you want to create
middleware home)
>Oracle Home Directory:**BI home path(Auto-fills)
>Weblogic server directory:**wlserver home directory(auto-fills)
>Domain home Location:**domain home(auto-fills)
>Oracle Instance Location:**Instance1 directory path(auto-fills)
>Oracle Instance name: (auto-fills)
-Select all the four components(mandatory part for OBIA configuration)
-Give the details of the BIPLATFORM schema we created in our previous step
Database type:**Oracle
Connect string :*Host:port:sid
BIPlatform username:**prefix_BIPLATFORM
BIPLATFORM Schema password
-Give the details of the MDS schema we created in our previous step
Database type:**Oracle
Connect string :*Host:port:sid
BIPlatform username:**prefix_MDS
BIPLATFORM Schema password
-Select Auto-port configuration
-Skip security updates
-Click on install
-Once the installation is complete,save the summary details file
Before applying the patch, make sure you stop all the services and the node
manager.
For selecting the installation type, make sure to select the below
components
>Let the prerequisites check run
>Specify Installation location : You must choose the Middleware home
where OBIEE is installed.
>Select weblogic as application server
>In the repository configuration screen, Select skip configuration option as
ODI will be configured later with OBIA configuration.
>Click on Install and wait until installation completes.
Prefix_DW
Prefix_BIACOMP
Prefix_ODIREPO
>in the Custom Variable screen, for the value column, give the
path of the directory in which we had copied the dmp files
Before beginning ensure OBIEE, ODI and Weblogic is stopped including the
node manager.
These directories contain more zip files these will be unzipped by the
script that performs the patch installation.
Now the patch script can be run. This uses perl and needs to be run
from a command window
You need to edit this file in a text editor and amend all of the paths
specified. The original file looks like this:
Once the apply_patches_import.txt file is edited, run the following
command to apply the patch
You can check the log of the patch, present in the WORKDIR
directory
>ATG Update, Use the below command using the suitable changes
> FSM Update, Use the below command using the suitable changes
At this point the BI Apps and ODI software has been installed but not yet
deployed to the weblogic server. So the next step is run the configuration
wizard to perform the deployments.
ODI
Java EE Agent
ODI Console
Also an Administrator user for BI Apps will be created and the ODI repository
will be configured.
To start the configuration wizard locate and run the following command:
<OBIEE_HOME>/Oracle_BI1/bin/configApps.sh
> Enter the password for the Weblogic admin user (the other fields should be
default filled):
> The next screen shows you the home location details, but you cant change
anything
> You now need to specify a password for the OBIEE repository a new RPD
file will be installed by this process.
> Now you need to provide the location and user-id/password for the OBIEE
MDS schema created by the RCU when OBIEE was installed.
> Then it needs the connection details for the data warehouse schema,
BIAPPS_DW:
> Next you can specify the ports, but again Im keeping defaults 9704 for
BIACM and 15001 for the ODI Console:
> Then confirm the details are correct before starting the configuration:
> Take a note of the installation details (URLs etc) and save them before
closing the Configuration tool.