You are on page 1of 5

Annex to Certificate No.

: 01 202 IND/Q-14-0009
Details of the Validity of the Approval as Manufacturer of Materials in accordance to DGR 97/23/EC and AD2000-W0/TRD 100
respectively

Manufacturer Work Nationality Date Page No.. TV-Name /Stamp


Company Name: Kisco Castings India Limited Guru Ki Nagari, Bhadla Road, Madi 18-03-2014 1 TV Industrie
Gobindgarh-147301,Distt. Fatehgarh Service GmbH
Location: Sahib, Punjab Rev.: 0 of : 4

Materials-term Material Delivery Article Dimensions Weight Technical Remarks


Cur- Materials-No. Specification Cond. Type of Product max Specifications
* Thickness Requirements
mm mm 1=t / Technical
2=kg Regulations
fro Up fro Up Re
m to m to sult
1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10
The use of the materials according to DGR 97/23/EC is bound to the publication of Harmonized European Standards or to the qualification by a European material approval
or to the particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved.
The requirements and limits of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
1.4301 EN 10088-3 AS Hot Forged Product 100 550 100 TO 500 0 8T AD 2000 A PMA by the pressure equipment
CAST , (Bars, Flats, MERKBLATT W2 manufacturer (category I/II)
Shafts,Wheel Blank respectively Notified Body (III/IV) is
etc.)
requested
1.4307 EN 10088-3 Hot Rolled Bar
(Rounf , Square,
Hex. Etc)
1.4401 EN 10088-3 20 140 12 152 0 1T
1.4404 EN 10088-3 A AD 2000
Merkblatt W2
1.4541 EN 10088-3 76 865 0 8T
1.4571 EN 10088-3 Casted steel Ingot
304/304L ASTM
316/316L ASTM
321/316 Ti
Remarks * A = solution treatment and quenched V = quenched and tempered a = material
L = solution treatment CR = temperature controlled rolled b = delivery condition
N = normalized c = article
S = stress relieved annealed G = soft annealed d = dimensions in tech. regulations
TM = thermos mechanical treatment e = weight
U = not treated f = No. of tech. regulation

Revised E-108-E-Scope MM-D-Rev1.docx


Annex to Certificate No.: 01 202 IND/Q-14-0009
Details of the Validity of the Approval as Manufacturer of Materials in accordance to DGR 97/23/EC and AD2000-W0/TRD 100
respectively

Manufacturer Work Nationality Date Page No.. TV-Name /Stamp


Company Name: Kisco Castings India Limited Guru Ki Nagari, Bhadla Road, Madi 18-03-2014 2 TV Industrie
Gobindgarh-147301,Distt. Fatehgarh Service GmbH
Location: Sahib, Punjab Rev.: 0 of : 4

Materials-term Material Delivery Article Dimensions Weight Technical Remarks


Cur- Materials-No. Specification Cond. Type of Product max Specifications
* Thickness Requirements
mm mm 1=t / Technical
2=kg Regulations
fro Up fro Up Re
m to m to sult
1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10
The use of the materials according to DGR 97/23/EC is bound to the publication of Harmonized European Standards or to the qualification by a European material approval
or to the particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved.
The requirements and limits of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
347 ASTM AS Hot Forged Product 100 550 100 TO 500 0 8T A PMA by the pressure equipment
CAST , (Bars, Flats, manufacturer (category I/II)
Shafts,Wheel Blank respectively Notified Body (III/IV) is
etc.)
requested
329 ASTM
303/309/310 ASTM Hot Rolled Bar 20 140 12 152 0 1T
(Rounf , Square,
F51/F11/F9 ASTM A Hex. Etc)
317L ASTM 76 865 0 8T
Casted steel Ingot
Hot Forged Product
(Bars, Flats,
Shafts,Wheel Blank
etc.)
Remarks * A = solution treatment and quenched V = quenched and tempered a = material
L = solution treatment CR = temperature controlled rolled b = delivery condition
N = normalized c = article
S = stress relieved annealed G = soft annealed d = dimensions in tech. regulations
TM = thermos mechanical treatment e = weight
U = not treated f = No. of tech. regulation

Revised E-108-E-Scope MM-D-Rev1.docx


Annex to Certificate No.: 01 202 IND/Q-14-0009
Details of the Validity of the Approval as Manufacturer of Materials in accordance to DGR 97/23/EC and AD2000-W0/TRD 100
respectively

Manufacturer Work Nationality Date Page No.. TV-Name /Stamp


Company Name: Kisco Castings India Limited Guru Ki Nagari, Bhadla Road, Madi 18-03-2014 3 TV Industrie
Gobindgarh-147301,Distt. Fatehgarh Service GmbH
Location: Mandigobindgarh, Punjab Sahib, Punjab Indian Rev.: 0 of : 4

Materials-term Material Delivery Article Dimensions Weight Technical Remarks


Cur- Materials-No. Specification Cond. Type of Product max Specifications
* Thickness Requirements
mm mm 1=t / Technical
2=kg Regulations
fro Up fro Up Re
m to m to sult
1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10
The use of the materials according to DGR 97/23/EC is bound to the publication of Harmonized European Standards or to the qualification by a European material approval
or to the particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved.
The requirements and limits of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
1.0436 EN 10222-2 N 100 550 100 TO 500 0 8T A PMA by the pressure equipment
1.7383 EN 10222-2 NT manufacturer (category I/II)
1.7335 EN 10222-2 NT, Hot Forged Product respectively Notified Body (III/IV) is
(Bars, Flats,
1.4922 EN 10222-2 requested
Shafts,Wheel Blank
etc.)
1.6582 EN 10083-3 G 20 140 12 152 0 1T
1.7034 EN 10083-3 G
Hot Rolled Bar
1.6580 EN 10083-3 G (Rounf , Square, 76 865 0 8T
Hex. Etc)
1.7131 EN 10084 N
1.7147 EN 10084 G
1.6587 EN 10084 G
Casted steel Ingot
1.7225 EN 10083-1 G

Remarks * A = solution treatment and quenched V = quenched and tempered a = material


L = solution treatment CR = temperature controlled rolled b = delivery condition
N = normalized c = article
S = stress relieved annealed G = soft annealed d = dimensions in tech. regulations
TM = thermos mechanical treatment e = weight
U = not treated f = No. of tech. regulation

Revised E-108-E-Scope MM-D-Rev1.docx


Annex to Certificate No.: 01 202 IND/Q-14-0009
Details of the Validity of the Approval as Manufacturer of Materials in accordance to DGR 97/23/EC and AD2000-W0/TRD 100
respectively

Manufacturer Work Nationality Date Page No.. TV-Name /Stamp


Company Name: Kisco Castings India Limited Guru Ki Nagari, Bhadla Road, Madi 18-03-2014 4 TV Industrie
Gobindgarh-147301,Distt. Fatehgarh Service GmbH
Location: Mandigobindgarh, Punjab Sahib, Punjab Indian Rev.: 0 of : 4

Materials-term Material Delivery Article Dimensions Weight Technical Remarks


Cur- Materials-No. Specification Cond. Type of Product max Specifications
* Thickness Requirements
mm mm 1=t / Technical
2=kg Regulations
fro Up fro Up Re
m to m to sult
1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10
The use of the materials according to DGR 97/23/EC is bound to the publication of Harmonized European Standards or to the qualification by a European material approval
or to the particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved.
The requirements and limits of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
A105 ASTM N 120 550 100 to 150 0 8T A PMA by the pressure equipment
F11 ASTM G manufacturer (category I/II)
F22 ASTM G Hot Forged Product respectively Notified Body (III/IV) is
(Bars, Flats,
LF2 ASTM N requested
Shafts,Wheel Blank
410 ASTM G etc.) 20 140 12 to 152
416 ASTM G&V
4130 ASTM N&G
4340 ASTM G
4145 ASTM G Hot Rolled Bar 76 865 0 8T
4140 ASTM G (Rounf , Square,
8620 ASTM U Hex. Etc)
1.0045 En 10025-2 N
1.0044 En 10025-2 N
1.0038 En 10025-2 N Casted steel Ingot

Remarks * A = solution treatment and quenched V = quenched and tempered a = material


L = solution treatment CR = temperature controlled rolled b = delivery condition
N = normalized c = article
S = stress relieved annealed G = soft annealed d = dimensions in tech. regulations
TM = thermos mechanical treatment e = weight
U = not treated f = No. of tech. regulation

Revised E-108-E-Scope MM-D-Rev1.docx

You might also like