You are on page 1of 3

(home.

do)
LOCATE A DEALER (locate.do) | FIND A
CONTRACTOR (findcontractor.do)

(http://www.rdasiatrustedbrands.com/boysen_showcase.html)

Home (home.do) Products (http://www.boysen.com.ph/products.do?group_id=39) Plexibond (http://www.boysen.com.ph/products.do?category_id=272) BOYSEN


Plexibond Cementitious Waterproofing System #7760 (http://www.boysen.com.ph/products.do?item_id=780)

BOYSEN Plexibond Cementitious


Waterproofing System #7760

BOYSEN Plexibond #7760 is a specially


formulated acrylic polymer designed for
(http://www.mixandmatchcolors.com/)
compounding with pozzolan or Portland cement.
The resulting mixture possesses excellent
adhesion, water resistance and flexibility even on
thin section applications. Its use eliminates cement
plastering defects and water seepage, making it
ideal for waterproofing roof decks and firewalls. It
makes a durable and decorative cementitious
coating that not only enhances the appearance of
(calculator.do) light building materials but also prolongs their
service life. It offers excellent corrosion resistance
when applied on metal surfaces, and can also be
used to improve adhesion to mortar patching and
tile grout.

(http://boysenknoxoutproject.com/)

http://www.boysen.com.ph/products.do?item_id=780
Surface Preparation:

1. BOYSEN Plexibond #7760 should be applied on bare concrete, wood, or metal NOT PREVIOUSLY
PAINTED.

2. Surface should be clean, free from oil, grease, dirt, any loose grit or mortar. Wet Masonry surfaces first
with water before applying mix to avoid abrupt drying and cracking of the applied modified cement,
especially under hot and sunny conditions.

Preparation of Mixture:

1. Mix 6.5 to 7.5 kgs. of cement to 4 liters of BOYSEN Plexibond #7760.

2. To prevent lumping, add cement to Plexibond slowly while stirring.

3. Pass mixture through a fine strainer to sift out lumpy materials.

4. Ensure intimate mixing, stirring as often as possible to avoid settling. Mixture proportion should be kept
constant for a uniform texture.

5. Mix only enough material to prevent waste. Workability of BOYSEN Plexibond mixture is 30
minutes, while pot life is 2 hours.

Application:

For vertical surfaces:

1. Apply 2 coats of the BOYSEN Plexibond mixture by textured roller (orange peel texture) while
maintaining coverage rate at 5 -6 sq. meters per gallon.

2. Orange peel textured finish can also be achieved by applying on coat by brush and a second by mortar
gun. Recoating interval is 1 to 2 hours.

For horizontal surfaces:

1. Apply 3 coats by textured roller.

2. Reinforce joints, corners, and active cracks susceptible to cracking or movement with a strip of
fiberglass matting.

3. Put on the matting immediately after the second coat, while the mixture is still wet. The matting should
adhere to the mixture.

4. Make sure the BOYSEN Plexibond mix and the matting is completely dry before applying
succeeding coats.

5. The matting should be completely should be completely covered by the mixture.

6. Let dry for one day then apply a bond coat by brushing BOYSEN Plexibond straight from the can
prior to laying out mortar topping.

For filling large cracks:

1. Add 3 parts by volume of fine uniform-sized sand to 1 part cement and mix with BOYSEN
Plexibond to trowellable consistency.

Note:

1. The effectiveness of BOYSEN Plexibond as waterproofing is limited to water coming from positive
side (water ingress above the coated part of the substrate) and not from the negative side (water coming
from the back of the coating applied on the substrate).

2. The cementitious coating will be able to cover hairline cracks but will not bridge gaps and active
structural cracks. Immediate repairs using suitable sealants should be done.

Painting:

For maximum durability, paint application is recommended. Allow BOYSEN Plexibond to dry at least
one (1) day before paint application. Suggested painting systems are:

1. BOYSEN Wallguard dirt - resisting water - based acrylic finish


2. BOYSEN Acrytex watertight acrylic solvent based finish
3. BOYSEN Permacoat Latex acrylic water-based latex finish
4. BOYSEN Acqua Epoxy acrylic water - based epoxy finish

http://www.boysen.com.ph/products.do?item_id=780
Video

BOYSEN Plexibond Cementitious Waterproofing System #7760

COMPANY INFO PRODUCTS TOOLS QUICK LINKS CONNECT WITH US

Home (home.do) Products (products.do?group_id=39) Locate a Dealer BOYSEN KNOxOUT Facebook


About BOYSEN Colors (colors.do) (locate.do) (http://boysenknoxoutproject.com/)
(https://www.facebook.com
(about.do) MSDS (msds.do) Find a Contractor BOYSEN Virtuoso
/boysenpaintsphilippines)
Contact Us Mix & Match (findcontractor.do) (http://virtuosopaints.com/)
(contact.do) (http://www.mixandmatchcolors.com/) Choose Your Paint BOYSEN Healthy Home Twitter
News (news.do) (choosepaint.do) (http://healthyhomepaints.com/) (https://twitter.com
Videos Interactive Product
/boysentsd)
(videos.do) Usage
(interactive.do) Pinterest
FAQ (faq.do)
Paint Calculator (http://pinterest.com
(calculator.do) /boysenpaints)
Instagram
(http://instagram.com
/boysenpaintsphilippines)
Youtube
(http://youtube.com
/user/BoysenPaintsPhil)

2013 Boysen Paints. All Rights Reserved.

http://www.boysen.com.ph/products.do?item_id=780

You might also like