You are on page 1of 6

Table of Contents

Cover Sheet....................................................................................................................... 2
Title Page......................................................................................................................... 4
Shell Analysis : New Shell..................................................................................... 5
Vessel Results Summary......................................................................................... 8
2
3

Input Echo, Component 1, Description: New Shell

User Entered Minimum Design Metal Temperature -8.00 C

Include Hydrostatic Head Components YES

Operating Liquid Density 0.000 kg./cm^3

Height of Liquid Column ( Operating ) 0.00 mm.

Height of Liquid Column ( Hydrotest ) 0.00 mm.

Material Specification (Not Normalized) SA-36

Material UNS Number K02600

Material Form used Plate, sheet

Allowable Stress At Temperature S 114.457 N./mm^2

Allowable Stress At Ambient SA 114.457 N./mm^2

Yield Stress At Temperature Sy 232.170 N./mm^2

Curve Name for Chart UCS 66 A

Joint efficiency for Head Joint E 1.00

Diameter of Flat Head D 2000.000 mm.

Minimum Thickness of Pipe or Plate T 6.0000 mm.

Nominal Thickness of Pipe or Plate Tnom 6.0000 mm.

Shell/Head Int. Corrosion Allowance CA 0.0000 mm.

Attachment Factor CF 0.3300

Large Diameter of Flat Head DL 2125.000 mm.

Skip UG-16(b) Min. thickness calculation NO

Type of Element: Flat Head

Internal pressure results, Shell Number 1, Desc.: New Shell


4

ASME Code, Section VIII, Division 1, 2013

Thickness Due to Internal Pressure (Tr):

= (D) * SQRT(Z*CF*P/(S*E)) per UG-34 (c) (3)

= (2000.0000)*SQRT(1.14*0.33*0.00/(114.46*1.00))

= 0.0000 + 0.0000 = 0.0000 mm.

= 1.5875 mm. ( Per Ug 16b )

Max. All. Working Pressure at Given Thickness (MAWP):

= ((T-CA-CAE)/D)^2 * ((S*E)/(CF*Z)) per UG-34 (c) (3)

= ((6.0000)/2000.0000)**2*((114.46*1.00)/(0.33*1.14))

= 0.00 N./sq.mm.

Maximum Allowable Pressure, New and Cold (MAPNC):

= (T/D)^2*((S*E) / (CF*Z)) per UG-34 (c) (3)

= (6.0000/2000.0000)**2*((114.46*1.00)/(0.33*1.14))

= 0.00 N./sq.mm.

Actual stress at given pressure and thickness (Sact):

= (Z*CF*P) / ((((T-CA-CAE)/D)^2)*E)

= (1.14*0.33*0.00)/((((6.0000)/2000.0000)**2)*1.00)

= 0.00 N./mm^2

SUMMARY OF INTERNAL PRESSURE RESULTS:

Required Thickness plus Corrosion Allowance, Trca 1.5875 mm.

Actual Thickness as Given in Input 6.0000 mm.

Maximum Allowable Working Pressure MAWP 0.003 N./sq.mm.

Maximum Allowable Pressure, NC MAPNC 0.003 N./sq.mm.

Design Pressure as Given in Input P 0.000 N./sq.mm.

Hydrostatic Test Pressures ( Measured at High Point ):

Hydrotest per UG-99(b); 1.3 * MAWP * Sa/S 0.00 N./sq.mm.

Hydrotest per UG-99(c); 1.3 * MAPNC 0.00 N./sq.mm.

Pneumatic per UG-100 ; 1.1 * MAWP * Sa/S 0.00 N./sq.mm.


5

Minimum Design Metal Temperature per UCS-66 Curve : A

tg = 1.500 , tg_sr = 6.000 , tr = 1.587 , c = 0.0000 mm. , E* = 1.00

Stress Ratio = tr * (E*) / (tg_sr - c) = 0.265 , Temp. Reduction = 78 C

Min. Metal Temp. w/o impact per Fig. UCS-66 -8 C

Min. Metal Temp. at Req'd thk. (UCS 66.1) -86 C

Min. Metal Temp. w/o impact per UG-20(f) -29 C

Weight and Volume Results, No C.A. :

Volume of Shell Component VOLMET 0.2035E+08 mm.^3

Weight of Shell Component WMET 1546.6 N..

PV Elite is a trademark of Intergraph CADWorx & Analysis Solutions, Inc. 2014


6

Summary for shell/head, Div 1:

MAPNC MAWP Min. T Tr-int Tr-ext EMAWP

Description N./sq.mm. N./sq.mm. mm. mm. mm. N./sq.mm.

----------------------------------------------------------------------

New Shell --- --- 6.000 --- --- ---

----------------------------------------------------------------------

Minimum MAWP 0.003 0.003 ---

Note: Reqd. thk. reported above includes Corrosion Allowance.

Total Shell/Head weight is (New-Cold) 1546.6 N..

Total Shell/Head weight is (Corroded) 1546.6 N..

Total Shell/Head weight, filled with Water (New) 1546.6 N..

Total Shell/Head volume is (New-Cold) 0.0 mm.**3

Total Shell/Head volume is (Corroded) 0.0 mm.**3

Least MAWP and Overall Weight Results :

The Least MAWP (N C) for New Shell was 0.00 N./sq.mm. .

The Least MAWP (Cor) for New Shell was 0.00 N./sq.mm. .

The total sum of the Weights ( N C ) was 1546.59 N.. .

The total sum of the Weights ( Cor ) was 1546.59 N.. .

You might also like