Professional Documents
Culture Documents
IPC
|InteliDrive IPC Datasheet |Related HW ver: 1.6 |Related SW ver: 1.0.0 |Date of issue: 15.3.2016 1
Technical data
Power supply Input impedance > 100 k
Precision 1 % 1 mV out of measured value
Power supply range 8 - 36 V DC
Supported sensor User-defined: 30 points non-linear
Power supply drop-out
100 ms (from min. 10 V) types sensors can be defined by the user
immunity
Power consumption 440 mA @ 8 V; 40 mA @ 36 V Communication
Backup battery type CR 1225 External modules
Estimated backup CAN 250 kbps, max 200 m
10 years Isolated
battery lifetime
Number 5 non-isolated
Operating voltage 8 - 36 V DC
Switching to negative supply terminal
Max current 0,5 A (2 A per group)
Plug in module
Note: The controller is to be mounted onto the switchboard door. The requested cut-out size is 175x115 mm.
Use the screw holders delivered with the controller to fix the controller into the door.
EN 61000-6-1
EN 61000-6-2
EN 61000-6-3
EN 61000-6-4
EN 61010-1
Manufacturer:
ComAp a.s. Fax: +420 266 316 647
Czech Republic E-mail: info@comap.cz
Phone: +420 246 012 111 Internet: www.comap.cz