Evaluation Tool. Washington, D.C: AASHTO. 2. ADLINGE, S and GUPTA, A. 2013. Pavement Deterioration and its causes. IOSR Journal of Civil and Mechanical Engineering, 6(3), p. 9-15. 3. ALDERSON, A. 2010. Review of the Environmental Aspects of Warm-Mix Asphalt. Sydney: Austroads Publications. 4. AMERICAN SOCIETY FOR TESTING AND MATERIALS. 2017. D6927-15(2003) Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures. West Conshohocken: ASTM International. 5. ANANTHAN, M. 2016. The evaluation of rubberised asphalt in mixes containing reclaimed asphalt pavement in order to set up guidelines for use in pavement construction in the tropics. BEng (Hons). University of Mauritius. 6. ANGELA, F., ZANETT, M., EZIO, S., BIENGINI, G., AND LANOTTE, M. n.d. Life Cycle Assessment of Road Pavements containing crumb rubber from end of life tyres. Torino, Italy: Department of Environment, Land and Infrastructure Engineering, Politechnico di Torino. 7. ANTHONISSEN ET AL. 2015. Life Cycle Assessment of Hot Mix Asphalt and Zeolite-based Warm Mix Asphalt with Reclaimed Asphalt Pavement. Resource Conservation and Recycling. 105(12), p. 78-83. 8. ARABANI ET AL. 2010. The effect of waste tyre thread mesh on the dynamic behaviour of asphalt mixtures. Construction Building Materials. 24(5), p. 1060-1068. 9. ASPHALT INSTITUTE. 1992. Pavement Distress Summary. [Online] Available at: http://www.asphaltinstitute.org/wp- content/uploads/public/engineering/pdfs/Pavement_Distress_Summary.pdf. [Accessed 29 October. 2016]. 10. AUSTERMAN ET AL. 2012. Laboratory Evaluation of Sasobit-Modified Warm Mix Asphalt for Alaskan conditions. Journal of Materials in Civil Engineering. 23(11), p. 335-348. 11. AUSTROADS. 2007. Performance Evaluation of Warm-Mix Asphalt. Sydney: Austroads Ltd. 12. AUSTROADS. 2010. Investigation of environmental impacts of warm mix asphalt pavements. Sydney: Austroads Ltd. 13. AUSTROADS. 2016. Maximising the use of Reclaimed Asphalt Pavement in Asphalt Mix Design Field Validation. Sydney: Austroads Ltd. 14. BARTOLOZZI, I, RIZZI, F, BORGHINI, A AND FREY, M. 2011. Life Cycle Assessment of Rubberized Asphalt Road Pavement in Lamia, Greece. In: Proceedings of the 3rd International CEMEPE & SECOTOC Conference. Albama, United States: EnviTech. 15. BEEHARRY, R. 2015. Evaluation of wax-based warm mix asphalt with and without reclaimed asphalt pavement. BEng (Hons). University of Mauritius. 16. BEHIRY, A. 2012. Laboratory Evaluation of resistance to moisture damage in asphalt mixtures. Ain Shams Engineering Journal. 4(3), p. 351-363. 17. BEHZAD, B. 2012. Fracture characterisation of asphalt mixtures with reclaimed asphalt pavement. MSc. University of Illinois. 18. BERTHELOT, C. 2010. Cement Stabilisation of Reclaimed Asphalt Pavement Materials. MSc. University of Saskatchewan. 19. BERTOLLO ET AL. 2004. Mechanical Properties of Asphalt Mixtures using Recycled Tyre Rubber produced in Brazil A Laboratory Evaluation. TAB Annual Meeting. Denver, Canada. 20. BINDRA, S. 1984. A course in Highway Engineering. 5th Edition. Delhi: India, p. 156-159. 21. BITUMINA. 2016. Penetration Grade Bitumen [Online]. Available at: http://www.bitumina.co.uk/penetration-bitumen.html. [Accessed 13 February. 2016]. 22. BOLDEN, J, ABU-LEBDEH, T AND FIMI, E. 2013. Utilisation of recycled and waste materials in various construction applications. American Journal of Environmental Science. 9(1). p. 14-24. 23. BOODHOO, S. 2008. The Changing Climate in Mauritius. High Level Conference on World Food Security: The Challengers of Climate Change and Bioenergy. Rome. 3-5 June 2008. USA: Food and Agriculture Organisation of the United Nations, p. 23-27. 24. BOWER, N. 2009. Laboratory Evaluation of Performance of Warm Mix Asphalt in Washington State. MSc. Washington State University. 25. BRAEN, S. 2014. Use of RAP in hot-mix asphalt. [Online] Available at: http://www.braenstone.com/asphalt/ [Accessed 25 October. 2016]. 26. BRITISH STANDARDS INSTITUTION. 2012. BS EN 933-3: 2012 Tests for geometrical properties of aggregates Part 3: Determination of particle shape Flakiness Index. London: British Standards Institution. 27. BRUNDTLAND COMMISSION. 1987. What is Sustainable Development? [Online] Available at: http://www.worldbank.org/depweb/english/sd.html. [Accessed 03 October.2016] 28. CALIFORNIA DEPARTMENT OF TRANSPORTATION. 2012. Hot Mix Asphalt with Reclaimed Asphalt Pavement [Online]. Available at: http://www.dot.ca.gov/hq/construc/CPDirectives/documents/cpd16-8.pdf. [Accessed 03 March. 2017]. 29. CENTRAL STATISTICS OFFICE. 2009. Mauritius in Figures. [Online] Available at: http://statsmauritius.govmu.org/English/Publications/Documents/MIF/mif09.pdf. Port Louis: Government of Mauritius. [Accessed on 18 October.2016] 30. CENTRAL STATISTICS OFFICE. 2013. Mauritius in Figures. [Online] Available at: http://statsmauritius.govmu.org/English/Publications/Documents/MIF/mif13.pdf. Port Louis: Government of Mauritius. [Accessed on 18 October.2016] 31. CERATTI ET AL. 2005. Modelling of asphalt rubber rotational viscosity by statistical analysis and neural networks. Materials Research Journal. 10(1), p. 69-74. 32. CHESNER, W., STEIN, C., JUSTUS, H., AND KEARNEY, E. 2008. Evaluation of factors affecting the long-term performance of cold-in-place recycled pavements in New York State. In: 90th Annual Meeting of the Transportation Research Board. January 23-27, 2007. Washington: Transportation Research Board. 33. CHOWDHURY, A AND BUTTON, J. 2012. A review of Warm Mix Asphalt [Online]. Texas: Texas Transportation Institute. Available at: http://d2dtl5nnlpfr0r.cloudfront.net/swutc.tamu.edu/publications/technicalreports/473700- 00080-1.pdf. [Accessed 05 January. 2017] 34. CRONEY, D and CRONEY, P. 1991. Performance of road pavements. Boston: Mc Graw-Hill Professional, p. 28-31. 35. CROTEAU, J AND TESSIER, B. 2008. Warm Mix Asphalt Paving Technologies A Road Builders Perspective. Brussels: Transportation Association of Canada. 36. DANGELO ET AL. 2008. Warm-Mix Asphalt: European Practice. [Online] Available at: http://international.fhwa.dot.gov/pubs/pl08007/pl08007.pdf. [Accessed 21 October.2016] 37. EDWARDS, Y. 2005. Rheological effects of waxes in Bitumen. MSc. Division of Highway Engineering, Royal Institute of Technology (Sweden). 38. EISENMAN, A. 2012. Sustainable Streets and Highways: An Analysis of Green Roads Rating System. MSc. Georgia Institute of Technology. 39. EUROPEAN ASPHALT PAVEMENT ASSOCIATION. 2015. Asphalt in figures [Online] Available at: http://www.eapa.org/promo.php?c=174. [Accessed 20 October.2016]. 40. FAREED, S. 2016. Assessment of Reclaimed Asphalt Pavement for use in the subbase of flexible highway pavement in Mauritius. BEng (Hons). University of Mauritius. 41. FARINA ET AL. n.d. Life Cycle Assessment of road pavements containing crumb rubber from end-of-life tyres. Torino, Italy: Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino. 42. FAZAELI ET AL. 2013. Rheological properties of bitumen modified with a combination of Sasobit and other additives. Journal of Civil Engineering and Management. 18(12), p. 135- 145. 43. FEDERAL HIGHWAY ADMINISTRATION. 1997. User guidelines for waste and by-product materials in pavement construction. Washington: United States Department of Transportation. 44. FEDERAL HIGHWAY ADMINISTRATION. 2012. User guidelines for waste and by-product materials in pavement construction. [Online] Available at: https://www.fhwa.dot.gov/publications/research/infrastructure/structures/97148/rap132.cfm [Accessed 21 October.2016] 45. FEDERAL HIGHWAY ASSOCIATION. 2016. Production and Use of Reclaimed Asphalt Pavement. Washington: United States Department of Transportation. 46. FENG MA ET AL. 2016. Greenhouse Gas Emissions from Asphalt Pavement Construction: A Case Study in China. International Journal of Environmental Research and Public Health. 13(351), p. 1-15. 47. FLORIDA DEPARTMENT OF TRANSPORTATION. 2016. Flexible Pavement Design Manual. Tallahassee, Florida: Florida Department of Transportation, p. 57-62. 48. FOKEERBUX, N. 2013. The application of polymer-coated aggregates in flexible pavements. BEng (Hons). University of Mauritius. 49. GAMBHIR, M AND JAMWAL, N. 2004. Building and Construction Materials. 3rd Edition. New Delhi: Mc Graw-Hill Education Private Limited, p. 78-79. 50. GANDHI, T. 2008. Effect of warm mix asphalt additives on asphalt binder and mixture properties. PhD. Clemson University. 51. GIANI ET AL. 2014. Comparative Life Cycle Assessment of Asphalt Pavements using RAP, Warm Mix Technology and Cold in Place Recycling. Resource Conservation and Recycling. 104(43), p. 91-98. 52. GUDIMETTLA, J., COOLEY, L. AND BROWN, E. 2003. NCAT Report 03-03 - Workability of Hot Mix Asphalt. Auburn: National Centre for Asphalt Technology. 53. GUNESH, R. 2013. Use of waste plastics and scrap rubber tyre in bituminous pavement. BEng (Hons). University of Mauritius. 54. HICK, R. 1987. Moisture Damage in Asphalt Concrete. 2nd Edition. United States of America: NCHRP. [Accessed 13 January.2017] 55. HILL, B. 2013. Performance evaluation of warm mix asphalt mixtures containing reclaimed asphalt pavement. MSc. University of Illinois. 56. HOPPE, J. 2015. Feasibility of Reclaimed Asphalt Pavement Use as Road Base and Subbase Material. Virginia: Virginia Centre for Transportation Innovation and Research. 57. HUANG, Y. 2007. Life Cycle Assessment of Use of Recycled Materials in Asphalt Pavement. PhD. University of Newcastle. 58. HUANG, Y., BIRD, R., AND HEIDRICH, O. 2009. A review of the use of recycled solid waste materials in asphalt pavements. Resources Conservation and Recycling. 52(1), p. 58-73. 59. HUNT, E. 2002. Crumb Rubber Modified Asphalt Concrete in Oregon Final Report. Oregon: Oregon Department of Transportation. 60. HURLEY, B AND PROWELL, B. 2005. Evaluation of Sasobit for use in Warm Mix Asphalt. Alabama, United States: National Centre for Asphalt Technology, p. 13-18. 61. HURLEY, G AND PROWELL, B. 2005. Evaluation of Sasobit for use in Warm Mix Asphalt. Sydney: Austroads Ltd. 62. IMANINASAB ET AL. 2015. Rutting analysis of modified asphalt concrete pavements. Constructions Materials Institution of Civil Engineers. 28(5), p. 1434-1453. 63. INTERGOVERNMENTAL PANEL ON CLIMATE CHANGE. 2014. Climate Change and Bio Diversity IPCC Technical Paper V. Geneva: Switzerland, p. 85. 64. INTERNATIONAL STANDARDS ORGANISATION. 2006. ISO 14040 Environmental Management Life Cycle Assessment [Online]. Available at: https://www.iso.org/standard/37456.html [Accessed 13 February. 2016]. 65. JAMSHIDI ET AL. 2013. Performance of warm mix asphalt containing Sasobit: State-of-the- Art. Construction and Building Materials. 38(2). p. 530-533. 66. JONES, D. 2012. Warm Mix Asphalt Study: Summary Report on Warm Mix Asphalt Research in California [Online]. Available at: http://www.ucprc.ucdavis.edu/PDF/UCPRC-SR-2014- 02.pdf. [Accessed 29 January. 2017]. 67. JONES, W. 2004. Warm Mix Asphalt Pavements: Technology of the Future? The magazine of the Asphalt Institute. 19(2). p. 8-11. 68. JUGNAUTH, P. 2016. National Budget Speech 2016/2017. Mauritius: Ministry of Finance and Economic Development. 69. JUNG, S. 2006. The effects of asphalt binder oxidation on hot mix asphalt concrete mixture rheology and fatigue performance. PhD. University of Texas. 70. KANITPONG ET AL. 2007. Laboratory Study on Warm Mix Asphalt Additives. In: Annual Meeting of Transportation Research Board. Dartmouth, United States: Transportation Research Board. 71. KENNETH, A AND YAW, A. 2016. Warm Mix Asphalt and Pavement Sustainability: A Review. Open Journal of Civil Engineering. 6(4), p. 84-93. 72. KHODARY, F AND VORMWALD, M. 2007. Rheological properties and fatigue resistance of crumb rubber modified bitumen. In: 11th International Conference on Asphalt Pavements. Tokyo, Japan: South Valley University. 73. KRIDAN, F., ARSHAD, A. AND RAHMAN, M. 2011. The effect of Warm Mix Asphalt additive (Sasobit) on determination of optimum bitumen content. International Journal of Recent Research and Applied Studies. 6(4), p. 400-406. 74. KRISTJANSDOTTIR, O. 2006. Warm Mix Asphalt for Cold Weather Paving. MSc. University of Washington. 75. MASHAAN ET AL. 2011. Effect of crumb rubber on the physical and rheological properties of rubberised bitumen binders. International Journal of the Physical Sciences. 6(4), p. 684- 690. 76. MATTHEW, T AND KRISHNA RAO, K. 2007. Marshal Mix Design, in Matthew. T and Krishna Rao. K (5th Edition) Introduction to Transportation Engineering. New Delhi: NPTEL, p. 26.1-26.7. 77. MC CLENDON, E. 2012. 6 Signs That Mark The Path To Sustainable Road Design. Environmental Leader. 5 January.2012, p. 34. 78. MINISTRY OF ENVIRONMENT AND SUSTAINABLE DEVELOPMENT. 2011. Mauritius Environmental Outlook Report. 1st Edition. Port Louis: Government of Mauritius. 79. MOGAWER, W. 2011. Performance Characteristics of Asphalt Rubber Mixtures Containing RAP and Warm Mix Asphalt Technology. In: North East Asphalt User/Producer Group Fall Meeting. Dartmouth. United States: Highway Sustainability Research Centre, p. 4-28. 80. NATIONAL ASPHALT PAVEMENT ASSOCIATION. 2007. Asphalt Pavement Recycling with Reclaimed Asphalt Pavement. [Online] Available at: https://www.fhwa.dot.gov/Pavement/recycling/rap/index.cfm. [Accessed 28 October. 2016] 81. NATIONAL COOPERATIVE HIGHWAY RESEARCH PROGRAM. 2004. Calibration of rutting models for structural and mix design. [Online] Available at: http://www.trb.org/Publications/Blurbs/167220.aspx. [Accessed 29 October. 2016]. 82. NATIONAL COOPERATIVE HIGHWAY RESEARCH PROGRAM. 2011. Long term performance of warm mix asphalt technologies. Washington: Transportation Research Board, p. 13-48. 83. NEVILLE, A. 2012. Concrete Technology. 6th Edition. New Delhi: Pearson Education, p. 178- 179. 84. NUNEZ, W AND CERATTI, J. 2005. Delaying crack reflection in overlays An APT study comparing the efficiency of conventional asphalt concrete and asphalt rubber. Belfast, United Kingdom: Maire PAV 4. 85. OLIVEIRA, J., SILVA, H., PAIS, J., ABREU, L., AND FERNANDES, S. 2013. Use of a warm mix additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures. Journal of Clean Production. 2013(41), p. 15-22. 86. OSMAN ET AL. 2012. Evaluation of crumb tyre rubber-modified hot mix asphalt concrete in Sudan. In: Second International Conference on Sustainable Construction Materials: Design, Performance & Application. Wuhan, China: American Society of Civil Engineers, p. 18-22. 87. OVERSEAS ROAD NOTE 19. 2002. A Guide to the Design of Hot Mix Asphalt in Tropical and Sub-Tropical Countries. 1st Edition. London: Crown. 88. OVERSEAS ROAD NOTE 31. 1993. A Guide to the Structural Design of Bitumen Surfaced Roads in Tropical and Sub-Tropical Countries. 4th Edition. London: Transportation Research Laboratory Ltd. 89. PALIT, S AND REDDY, K. 2004. Laboratory Evaluation of Crumb Rubber Modified Asphalt Mixes. Journal of Materials in Civil Engineering. 16 (1), p. 45-53. 90. PAVEMENT INTERACTIVE. 2011. Los Angeles Abrasion [Online]. Available at: http://www.pavementinteractive.org/article/los-angeles-abrasion/. [Accessed 11 October.2016] 91. PERL. M. 1983. A visco-elastic-plastic constitutive law for a bituminous mixture under repeated loadings. PhD. University of Illinois. 92. POLITANO, A. 2012. Warm Mix Asphalt A greener alternative to Hot Mix Asphalt. Edmonton: Canadian Transportation Association. 93. PRE SUSTAINABILITY CONSULTANTS. 2017. ReCiPe Method [Online]. Available at: https://www.pre-sustainability.com/recipe. [Accessed 02 March. 2017]. 94. PRESTI, D. 2003. Recycled Tyre Rubber Modified Bitumen for road asphalt mixtures. Construction and Building Materials. 49(5). p. 863-881. 95. PROAG, V. 2006. Water Resources Management in Mauritius. European Water Publications, 16(8), p. 45-57. 96. PUGA, K. 2016. Rheology and performance evaluation of Polyoctenamer as Asphalt Rubber modifier in Hot Mix Asphalt. MSc. Iowa State University. 97. PUGA. K. 2015. Rheology and performance evaluation of polyoctenamer as asphalt rubber modified in hot-mix asphalt. MSc. Iowa State University. 98. PUTMAN, B. n.d. Effects of Fibre Finish on the Performance of Asphalt Binders and Mastic. Advances in Civil Engineering. 11(7), p. 26-34. 99. READ, J AND WHITEOAKS, D. 2003. The Shell Bitumen Handbook. 5th Edition. London: Thomas Telford Publishing, p. 78. 100. REDDY ET AL. 2004. Laboratory Evaluation of Crumb Rubber-Modified Asphalt Mixes. Journal of Materials in Civil Engineering. 16(2), p. 45-53. 101. RENUGADEVI, A. 2014. Evaluation of Marshall Properties of Warm Mix Asphalt using Sasobit. International Journal of Engineering Sciences and Research Technology [Online]. 3(12). p. 421-427. Available at: http://www.ijesrt.com/issues%20pdf%20file/Archives- 2014/December.2014/68_Evaluation%20of%20Marshall%20Properties%20of%20Warm %20Mix%20Asphalt%20using%20Sasobit.pdf 102. RESHNER, K. 2003. Scrap Tyre Recycling. [Online] Available at: http://www.entireengineering.de/Scrap_Tire_Recycling.pdf. [Accessed 10 October.2016] 103. ROAD DEVELOPMENT AURHORITY. 2012. Maintenance and Minor Works (Final) Section V Employers Requirements Part 2. Mauritius: Road Development Authority, p. 29-32. 104. RODRIGUEZ-ALLOZA, J. 2014. Warm Mix Asphalt: Warm Mix Asphalt Cost and Benefits [Online]. Available at: http://construction.about.com/od/Innovations/a/Warm-Mix-Asphalt- Warm-Mix-Asphalt-Cost-And-Benefits.htm. [Accessed 30 December. 2016]. 105. RUBBERISED PAVEMENT ASSOCIATION. 2006. Noise reduction within rubberised pavements. [Online] Available at: http://www.rubberpavements.org/library/noisereduction.asp [Accessed 20 October. 2016] 106. RUBIO ET AL. 2012. Warm Mix Asphalt: An Overview. Journal of Cleaner Production. 24(5). p. 76-84. 107. SALIH ET AL. 2013. Effect of Flakiness Index on Bituminous Mixes. International Journal of Scientific Engineering and Technology Research, 02 (10), p. 1023-1030 [Online] Available at: http://ijsetr.com/uploads/514263IJSETR277-13.pdf. [Accessed 12 October.2016] 108. SASOL WAX. 2016. Characteristics of Sasobit wax. [Online] Available at: http://www.sasolwax.com/index.php?id=fischer_tropsch_wax [Accessed 23 October. 2016] 109. SCHAERTL, J. AND EDIL, T. 2009. Engineering Properties of Recycled Materials for Unbound Applications [Online]. Available at: http://rmrc.wisc.edu/wp- content/uploads/2012/12/Edil-No.-46-Engineering-Properties-of-Recycled-Materials-for- Unbound-Applications.pdf. [Accessed 19 February. 2016]. 110. SHANBARA ET AL. 2016. Rutting Prediction of a Cold Bituminous Emulsion Mixture using Finite Element Modelling. Procedia Engineering. 164, p. 222-229. 111. SHERWOOD, P. 2001. Alternative Materials in road construction. 2nd Edition. London: Thomas Telford Ltd. 112. SILVA, H., OLIVEIRA, J., FERREIRA, C., AND PEREIRA, P. n.d. Assessment of the performance of warm mix asphalts in road pavements. Chinese Society of Pavement Engineering. 3(3), p. 119-127. 113. SOLAIMAN, M., HARVEY, J., TAHMORESSI, M. AND TANDON, V. n.d. Test Methods to predict moisture sensitivity of Hot Mix Asphalt Pavements. In: Transportation Research Board Moisture Sensitivity of Asphalt Pavement. 4-6 February 2003: California Department of Transportation. 114. SOUTH AFRICAN INSTITUTE OF CIVIL ENGINEERS. 2010. Road Surfacing Industry Suggests Greening its Footprint for Sustainable Development. Magazine of the South African Institute of Civil Engineers. 12(4), p. 64. 115. SOUTH AFRICAN NATIONAL ROAD AGENCY. n.d. Stress transfer in pavements. [Image] Available at: http://www.nra.co.za/live/content.php? Session_ID=b6fe1fa24d95f4791c83fb21851f7303&CategoryID=40 [Accessed 04 October.2016]. 116. SOUZA ET AL. 2005. Performance Evaluation of Asphalt-Rubber Concrete Mixtures. Belfast, United Kingdom: Maire PAV 4. 117. STATISTICS MAURITIUS. 2011. Digest of Road Transport and Road Accident Statistics. Port Louis: Government of Mauritius, p.7. 118. STATISTICS MAURITIUS. 2012. Digest of Environmental Statistics. Port Louis: Government of Mauritius, p. 3-6. 119. SULEIMAN ET AL. 2012. Evaluation of bitumen properties modified with additives. International Journal of Recent Research and Applied Studies. 13(1), p. 93-97. 120. T & DI / ASCE. 2010. Sustainability and Pavements: Are we focussing on the right things? T&DI/ASCE Green Streets and Highways Conference. Denver: ACPA. 121. THWINK. 2016. Environmental Sustainability. [Online] Available at: http://www.thwink.org/sustain/glossary/EnvironmentalSustainability.htm [Accessed 12 October.2016]. 122. UNITED NATIONS ENVIRONMENT PROGRAMME. 2010. Cleaner, More Efficient Vehicles. [Online]. Available at: http://www.unep.org/transport/gfei/autotool/case_studies/africa/mauritius/cs_af_mp_O.asp [Accessed 13 October.2016] 123. UNITED NATIONS ENVIRONMENT PROGRAMME. 2016. Rutting Behaviour of Asphalt Pavements [Online]. Available at: http://www.unep.org/transport/gfei/autotool/case_studies/asphaltpavement/rutting/cs_af_mp_ O.asp [Accessed 13 October.2016] 124. UNITED STATES ENVIRONMENTAL PROTECTION AGENCY. 2000. Documentation for Greenhouse Gas Emission and Energy Factors used in the Waste Reduction Model. [Online] Available at: https://www3.epa.gov/warm/pdfs/WARM_Documentation.pdf. [Accessed 10 October.2016] 125. US DEPARTMENT OF TRANSPORTATION. 2016. What is a Sustainable Highway?. [Online] Available at: https://www.sustainablehighways.org/203/what-is-a-sustainable- highway.html. [Accessed 12 October.2016] 126. US NATIONAL OCEANOGRAPHIC AND ATMOSPHERIC ADMINISTRATION. 2016. What is Climate Change? [Online] Available at: http://www.noaa.gov/climate [Accessed 18 October.2016]. 127. UZAROWSKI, L. 2006. The Development of Asphalt Creep Parameters and Finite Element Modelling of Asphalt Rutting. PhD. University of Waterloo. 128. VON DEVIVERE ET AL. 2011. Warm Mix Asphalt mixes by adding AsphaMin, a synthetic zeolite. Brussels: Eurovia. 129. WALKER, D. 1999. Intersection Strategy. Lexington, Kentucky: Asphalt Institute, p. 590. 130. WATHNE, L. 2010. Sustainability and Pavements: Are we focussing on the right things? Green Streets and Highways Conference. Denver. 23. September.2010. New York: T&DI/ASCE, p. 23-52. 131. WHITE, T. 2002. Contributions of pavement structural layers to rutting of hot mix asphalt pavements. Washington. D. C: Transportation Research Board, p. 67-90. 132. WOLF, S. 2012. Benefits of recycling asphalt shingles and asphalt pavement. [Online] Available at: http://www.wolfpaving.com/blog/bid/81660/Benefits-of-Recycling-Asphalt- Shingles-andAsphalt-Pavement [Accessed 19 October.2016] 133. WORLD BANK. 2010. Infrastructure and Growth in Africa. South Africa: World Bank, p. 67-68. 134. WORLD HIGHWAYS. 2010. Sustainable road construction: current practices and future concepts. [Online] Available at: http://www.worldhighways.com/categories/asphalt-paving- compactiontesting/features/sustainable-road-construction-current-practices-and-future- concepts/. [Accessed 11 October.2016] 135. WRIGHT, P and DIXON, K. 2004. Highway Engineering. 2nd Edition. Delhi: Wiley Publications, p.143-145. 136. WU, S., AND QIAN, S. n.d. Comparative study of warm mix asphalt and hot mix asphalt pavement based on LCA. Life Cycle of Structural Systems. London: Taylor and Francis Group. 137. WU, Y, PARKER, F AND KANDHAL, K. 1998. Aggregate Toughness / Abrasion Resistance and Durability / Soundness Tests related to asphalt concrete performance in pavements [Online]. NCAT Report, 98(4). Auburn: National Centre for Asphalt Technology. Available at: http://www.eng.auburn.edu/center/ncat/reports/rep98-4.pdf. [Accessed 23 October.2016] 138. XIAO ET AL. 2007. Laboratory Investigation of moisture damage in rubberised asphalt mixtures containing reclaimed asphalt pavement. International Journal of Pavement Engineering. 10(5), p. 319-328. 139. YILDRIM, E. 2000. Vinyl Acetate Emulsion Polymerisation and Copolymerisation with Acrylic Monomers. 2nd Edition. London: CRC Press. 140. ZAUMANIS, M. 2010. Warm Mix Asphalt Investigation. PhD. Riga Technical University. 141. ZHAO ET AL. 2013. Characterisation of Hot Mix Asphalt containing Reclaimed Asphalt Pavement Material in Cold Climate: An Alaskan Experience. In: Fourth International Conference on Sustainable Construction Materials and Technologies. Las Vegas, USA: SCMT4. 142. ZHAO, G AND GUO, P. 2012. Workability of Sasobit Warm Mixture Asphalt. Energy Procedia. 16(B), p. 1230 1236. 143. ZHU, H AND CARLSON, D. 1999. A spray-based crumb rubber technology in Highway Noise Reduction Application. Pennsylvania: Rubber Pavements Association, p. 89.