Professional Documents
Culture Documents
Supporting documentation
The form sets out the information you need to provide, and the documents you need
to attach, to support your Application. Any additional forms you need to complete and
attach are available at www.bpb.nsw.gov.au.
If you do not provide all of the information required, your Application will not be
considered until all of the information is received. You can attach additional pages if
needed.
If your supporting documents are not in English, you must provide a certified copy of
translated versions of those documents, in addition to certified copies of the original
documents.
The Board can require applicants to provide further written information, attend an
interview, undertake an oral examination and/or provide a demonstration of their
skills.
Residential address
Unit/Street no. Street
Suburb State Postcode
Business address/details
Business Name
Unit/Street no. Street
Suburb State Postcode
PO Box State Postcode
Contact details
Res. Tel. ( ) Bus. Tel. ( )
Mobile Fax ( )
Email
Applicants must attach a certified copy of their drivers licence, both the front and back,
showing their current address. Copies must be certified by a Justice of the Peace.
If you do not hold a current drivers licence, you should attach certified copies of documents
that prove your identity and address (such as a passport and a council rates notice).
Note: The Board may require you to provide additional documents or information if you provide
identification evidence other than a drivers licence.
Note: the authorities conferred by each Category are identified in Schedule 1 of the Building Professionals
Regulation 2007 (available at www.legislation.nsw.gov.au).
I have completed the Certification Short Course, UTS, or its equivalent in the last
twelve months. Please attach a certified copy of your Certificate of Successful
Completion, OR
I have passed the Boards accreditation exam in the last six months; OR
I seek alternative testing because I have a medical, physical or other condition that
would prevent me from being able to fairly demonstrate my knowledge and skills by
undertaking the accreditation exam. Please provide details as to why you cannot
undertake the exam and attach evidence of your relevant condition:
To satisfy the Specialty Performance Criteria for categories A1, A2 and A3 an applicant must
hold a qualification specified in Schedule 3, Part 2 of the Accreditation Scheme or an
equivalent qualification.
Please provide the following details of the qualification(s) you hold that are specified in of
Schedule 3, Part 2 of the Accreditation Scheme relevant to the Category of accreditation
applied for:
Please attach a certified copy of your testamur or qualification and a full academic transcript
for the qualification.
The Board will verify your qualification(s). Please complete and attach a Verification of
academic qualifications and registrations form [Form 2] to allow the Board to make the
necessary inquiries.
If you do not hold a qualification specified in Schedule 3, Part 2 of the Accreditation Scheme
you must provide evidence from the provider of one of the specified qualifications that the
qualification you hold is equivalent of the qualification issued by that provider. Providers of
the qualifications specified in Schedule 3, Part 2 of the Accreditation Scheme have processes
to address this.
You must provide the following details of the qualification(s) you hold for which you are
providing evidence from the provider of one of the qualification specified in Schedule 3, Part
2 of the Accreditation Scheme that your qualification is equivalent to the qualification issued
by that provider:
Name of the provider of the Name of the qualification issued Description of evidence of
qualification specified in by provider specified in Schedule equivalence*
Schedule 3, Part 2 3, Part 2
The Board will verify your qualification(s). Please complete and attach a Verification of
academic qualifications and registrations form [Form 2] to allow the Board to make the
necessary inquiries.
The Accreditation Statement for A4 sets out the qualification requirements for A4 and
provides five (5) Pathways for A4 applicants.
Please indicate which of the five (5) pathways you are applying under:
Pathway 1 - Qualified
Pathway 2 - Student or Qualified Builder or Pre-Purchase inspector
Pathway 3 Builders qualification
Pathway 4 Pre-purchase qualification
Pathway 5 Experience only
Applicants who are applying under Pathway 5 Experience only are not required to hold a
qualification and can go to section 10.
If you are applying for Category A4 under one of the Pathways that have a qualification
requirement, please provide the following details of your qualification relevant to the Category
A4.
Please attach a certified copy of your testamur or qualification and a full academic transcript.
The Board will verify your qualification(s). Please complete and attach a Verification of
academic qualifications and registrations form [Form 2] to allow the Board to make the
necessary inquiries.
If you are applying under Pathway 2 you and your supervisor need to complete and attach
Attachment 1 Verification of supervision statement
If you are a student applying under Pathway 2 please attach evidence of your current
enrolment in a relevant course.
If you are applying under Pathways 1 and 2 you do not need to demonstrate experience so
please go to Section 12.
To identify whether you automatically have the Specialty Performance Criteria by having a
recognised qualification or a recognised registration, please refer to the Evidence checklist
that relates to the Category of accreditation in which you seek to be accredited (available
at www.bpb.nsw.gov.au).
NPER
Where you seek accreditation in Categories of accreditation C1 - C16 (except C5) and you
are registered in the general area of practice on the National Professional Engineers Register
(NPER) identified in the relevant Accreditation Statement and Evidence checklist, go to
Section 11.
BOSSI
Where you seek accreditation in Category of accreditation C5 and you are registered as a
land surveyor with the Board of Surveying and Spatial Information (BOSSI), go to Section
11.
Others
Where the relevant Evidence checklist indicates that your qualification / registration does not
cover all of the Specialty Performance Criteria for the Category of accreditation you seek, or
you do not hold the relevant NPER or BOSS registration you need to need to complete and
attach the relevant Evidence checklist and Annotated performance criteria report [Form
3] (available at www.bpb.nsw.gov.au) to demonstrate you have the specialty performance
criteria you were not able to check in the relevant Evidence checklist.
Please go to Section 8.
Please provide the following details of the recognised specialty qualification(s) you hold
relevant to the Category(ies) of accreditation for which you are applying:
Please attach a certified copy of your testamur or qualification and a full academic transcript.
The Board will verify your qualification(s). Please complete and attach a Verification of
academic qualifications and registrations form [Form 2] to allow the Board to make the
necessary inquiries.
Please go to Section 10
If you do not hold a qualification specified in Schedule 3, Part 1 of the Accreditation Scheme
you must provide evidence from the provider of one of the specified qualifications that the
qualification you hold is equivalent of the qualification issued by that provider. Providers of
the specialty qualifications have a specific process in place to address this.
You must provide the following details of the qualification(s) you hold for which you are
providing evidence from the provider of one of the qualification specified in Schedule 3, Part
1 of the Accreditation Scheme that your qualification is equivalent to the specialty
qualification issued by that provider:
Please attach a certified copy of your testamur or qualification and a full academic transcript
for the qualification. If your supporting documents are not in English, you must provide a
certified copy of translated versions of those documents.
The Board will verify your qualification(s). Please complete and attach a Verification of
academic qualifications and registrations form [Form 2] to allow the Board to make the
necessary inquiries.
Please go to Section 10
Please complete and attach an Annotated resume [Form 5] for the Board to determine
whether you have the required experience (available at www.bpb.nsw.gov.au).
Applicants for Category A1 are advised to refer to the Experience Guide for Category A1
(available at www.bpb.nsw.gov.au).
A list of projects you have worked on to demonstrate the extent of your experience.
The list needs to briefly describe the projects you have worked on, the work you
carried out and the dates you carried out the work.
A detailed report of your work experience in relation to six of the most complex,
major or significant projects you have worked on. Provide a detailed narrative of the
work you carried out to demonstrate the extent of your experience.
The Board requests that you do not submit copies of lengthy reports such as BCA
assessment reports or fire engineering reports you have prepared or considered. Instead,
you are to provide a narrative describing the work you have carried out.
Applicants must also provide the names of at least two referees who can verify the
experience required by the relevant Accreditation statement:
The Board requires the nominated referees to verify the applicants experience. Please
attach a Referees statement [Form 6] for each referee you have listed above, completed
by that referee (available at www.bpb.nsw.gov.au).
The Referees statement [Form 6] should provide verification of the information provided in
the Annotated resum [Form 5], the list of projects and the detailed report of your work
experience in relation to six of the most complex, major or significant projects you have
worked on.
Referees and Referees statements should be provided from persons who are currently
accredited in the category of accreditation being applied for.
Referees and Referees statements are not to be provided by family members unless there
are exceptional circumstances. In such cases, attach reasons explaining why you have
relied on a family member to be a referee.
Go to Section 12
Please list the current registration you hold on NPER, or as a land surveyor issued by
BOSSI, which is relevant to the Category(ies) of accreditation for which you are applying:
Where you hold a relevant registration on NPER, please attach a certified copy of your
current certificate of registration.
The Board will verify your registration on NPER or as issued by BOSSI. Please complete and
attach a Verification of academic qualifications and registrations form [Form 2] to allow
the Board to make the necessary inquiries. Please go to Section 12
All applicants are required to complete and attach a Fit and proper person declaration
[Form 7] for the Board to make an assessment under section 7 (available
at www.bpb.nsw.gov.au).
Please go to Section 13
Attach a certified copy of a certificate of currency, which includes all of the following
information:
the name of the insurer
the identifying number of the insurance contract
period covered by the insurance
a retroactive date
confirms that the insurance covers the certifiers statutory liability under the Building
Professionals Regulation 2007 as an accredited certifier
the limit of indemnity in respect of any one claim (in $)
In addition, for partnership and company contracts, you also need to provide the following
information:
the number of accredited certifiers who are directors or employees of the company
as at the date on which the contract was issued:
or
if the contract is the fourth or subsequent contract issued to the company, whether by
the same or another insurer, the average number of accredited certifiers who have
been directors or employees of the company during the previous three years:
Note: An insurance contract must be held by an accredited certifier that satisfies section 63 of the Act and
Part 4 of the Building Professionals Regulation 2007.
Please go to Section 14
I acknowledge that:
Under section 307A of the Crimes Act 1900, I can be found guilty of an offence if I make
a false or misleading statement in this Application and the penalty for making a false or
misleading statement is two years imprisonment and/or a fine of $22 000, and
Under section 8(2)(a) of the Building Professionals Act 2005, the Board may suspend or
cancel my certificate of accreditation if I have been issued with the certificate on the
basis of a misrepresentation I have made, whether or not made knowingly.
Please go to Section 15
Applicants signature:
Date of Application: / /
Witness signature:
Witness name:
Date: / /
16. Fee
All applicants must pay the application fee.
Please identify your payment method and include the appropriate Application fee with this
Application:
cheque or money order (made payable to the Building Professionals Board)
MasterCard or Visa card please contact the BPB on 02 9860 1800 to arrange
payment.
NB: If your Application is refused, your Application fee will not be refunded. If you withdraw your
Application before it is determined, part of your Application fee may be refunded. If you apply for
accreditation in multiple categories of accreditation, the maximum fee you need to pay is $1500.
If you are applying for accreditation in Categories A1, A2, A3 and A4 please go to Section
17. If you are applying for accreditation in any other category please go to Section 18.
Disclaimer: While every reasonable effort has been made to ensure that this document is correct at the time of publication, the State
of New South Wales, its agents and employees, disclaim any and all liability to any person in respect of anything or the consequence
of anything done or omitted to be done in reliance upon the whole or part of this document.
Category A1
Category A2
Category A3
2. I am currently employed by
...
as