Professional Documents
Culture Documents
a. Commands on switch
a. Commands on switch
Configure terminal
Interface fastethernet 1/2
Exit
Commands on Switch 1
Configure terminal
Interface range fastethernet 0/1-2 Group range command to avoid
duplication of work
Channel-group 1 mode active Which interfaces are going to be part of this
bundle in group 1. In our case the above 2. Mode means whether we use lacp
and which mode of that protocol e.g pagp desirable mode. Active in our example
above is an Lacp mode.
Exit
Interface port-channel 1 channel group 1 mode active command above
creates a port channel one automatically and basically this command gets us
into the configuration mode for port-channel 1. This is the logical interface
channel-group 1 creates. Anything we type here is copied into the configuration
of the actual physical interfaces.
Switchport mode trunk
Switchport trunk allowed vlan 1,2,20
Commands on Switch 1
9. Verify Etherchannel
OR