Professional Documents
Culture Documents
RTU
Julian Bautista, Member, ISA, Ronal Florez, Member, ISA, Ricardo Gonzalez, Member, ISA.
bjulian@unicauca.edu.co ronalflorez@unicauca.edu.co ricardoa98@unicauca.edu.co
RTC: The switched telephone network (RTC) is In addition, the IEC 1131-3 standard includes a form of
defined as the set of elements made up of all the object-oriented programming called the Sequential Function
transmission and switching means necessary to Chart (SFC). SFC is often categorized as an IEC 1131-3
connect two terminal equipment at will by means language, but this is actually an organizational structure that
of a physical circuit, specific for communication. It coordinates the four standard programming languages (LD,
FBD, IL and ST). The structure of the SFC had its roots in the
is, therefore, a switched telecommunication
first French standard of Grafcet (IEC 848).
network.
A. LADDER: also known as a contact language or
USB Ports: Is an industry standard bus that defines ladder, is a very popular graphic programming
the cables, connectors and protocols used on a bus language within Programmable Logic Controllers
to connect, communicate and provide power (PLCs), because it is based on classical control
between computers, peripherals and electronic schemes. In this way, with the knowledge that every
devices. electrical technician has, it is very easy to adapt to the
programming in this type of language. Its main
advantage is that the basic symbols are normalized to
NEMA standards and are used by all manufacturers.
V. PROGRAMMING LANGUAGES
Currently each manufacturer designs its own programming
software, the most widespread worldwide are:
GRAPHIC LANGUAGES
TEXTUAL LANGUAGES
Steps (steps)
Transitions (conditions) The SICAM CMIC by SIEMENS. Is a product that was
Actions developed to meet the demands of todays power supply
issues. It features integrated UPS functionality, a simple,
direct connection of the mains voltage and storage batteries is
all thats needed. In addition, SICAM CMIC delivers 12 V DC
and 24 V DC to supply modems and to scan floating signaling
contacts. It is designed to cater a wide variety of applications
and concepts.
I semester of 2017 industrial communication systems 6
The SICAM A8000 series is a new modular device range for Though it has a limited number of I/O modules, the WAGO's
telecontrol and automation applications in all areas of energy ECO Telecontroller(750-880/025-002) is cost effective and
supply. the best alternative to complex control units. Nonetheless, not
This device series was developed to fulfil the requirements of all applications in the telecontrol sector requires a large
a broad field of applications. The most important features are: number of I/O modules. This telecontroller only connects to a
Suitable for rough ambient conditions thanks to mechanically maximum of four I/O modules.
stable modules and an extended temperature range from -40 to There are numerous advantages of this new and efficient
+70 C. device and some of these advantages include: they are cheaper
High voltage strength up to 5kV (IEC 60255) for use directly by far as compared to other telecontrollers with many I/O
in substations. modules, they are smaller in size and thus saving on space as
Fulfills tomorrows cyber security requirements with BDEW well as making it easier to install in small spaces. The areas of
White Paper conformity, integrated crypto chip and IPSec applications for this device are also quite wide and they
encryption. include local network station monitoring, virtual power plant
Integrated communications interfaces incl. GPRS on board. control as well as plant power reduction.
Automation functions (IEC 61131-3), e.g. for controlling a
regulated distribution transformer or for load control. RTU ADAM 3600 OF ADVANTECH:
Space-saving design with a module width of 30mm (without
display for CP)
Scalable by combining individual I/O modules.
Long product life cycle and high investment security by using
standards as IEC 61850.