Professional Documents
Culture Documents
IX-2015
Organization Name By
Welding Procedure Specification No. Date Supporting PQR No.(s)
Revision No. Date
Sketches may be attached to illustrate joint design, weld layers, and bead
sequence (e.g., for notch toughness procedures, for multiple process
procedures, etc.)]
(07/15)
307
ASME BPVC.IX-2015
Amps and volts, or power or energy range, should be specified for each electrode size, position, and thickness, etc.
Other
TECHNIQUE (QW-410)
String or Weave Bead
Orifice, Nozzle, or Gas Cup Size
Initial and Interpass Cleaning (Brushing, Grinding, etc.)
(07/15)
308
ASME BPVC.IX-2015
Organization Name
Procedure Qualification Record No. Date
WPS No.
Welding Process(es)
Types (Manual, Automatic, Semi-Automatic)
JOINTS (QW-402)
Shielding
FILLER MET LS (Q W-404) 1 2
SFA A ation
Sp ecific cation
AWS C lassif -No.
Filler i etalAnalysis A-No. ELECTRICAL CHARACTERISTICS (QW-409)
M F etal Metal Current
Weld Filler roduct Form Polarity
M Size etal al Filler Metal Amps. Volts
of P x Classificatio n Tungsten Electrode Size
Filler ment Mode of Metal Transfer for GMAW (FCAW)
M de ame Heat Input
Supple Flu Thic ness Other
Electro pe k
Flux
POSITION (QW-405) TECHNIQUE (QW-410)
Position(s) Travel Speed
Weld Progression (Uphill, Downhill) String or Weave Bead
Other Oscillation
Multipass or Single Pass (Per Side)
Single or Multiple Electrodes
PREHEAT (QW-406) Other
Preheat Temperature
Interpass Temperature
Other
(07/15)
309
ASME BPVC.IX-2015
PQR No.
Tensile Test (QW-150)
Ultimate Type of
Specimen Ultimate Unit Stress, Failure and
No. Width Thickness Area Total Load (psi or MPa) Location
Type of Test
Deposit Analysis
Other
Organization
Date Certified by
(Detail of record of tests are illustrative only and may be modified to conform to the type and number of tests required by the Code.)
(07/13)
310