Professional Documents
Culture Documents
20 (29-Sep-09)
The separate product component installable from or upgraded by this release is as follows:
Product Version
Product Name
Code Number
V00FN135 AVEVA Plot Utilities 12.1.5
Please note that recommended/supported hardware and software configurations are constantly subject to review, so
please consult the AVEVA support web pages for the latest recommendations.
For further information please contact your local AVEVA support office, which can be found at
http://support.aveva.com
File: d52333.doc
Last saved: 26-Nov-2015 Copyright 2015 AVEVA Solutions Limited Page 1 of 3
Product Release Letter
The AVEVA Plot Utilities are not licensed but the prerequisite associated products PDMS, Hull &
Outfitting or Everything3D require AVEVA Licensing System 2.0.
For full details, please refer to the AVEVA Everything3D 2.1 Installation Guide.
For full details, please see the compatibility matrix on the http://support.aveva.com/support/.
Supersedes:
This is a new product and does not directly supersede any previous product.
Installations using setup.exe will install into the standard directory C:\Program Files
(x86)\Common Files\Aveva Shared\Plot.
Overview of Product
AVEVA Plot Utilities is a graphical plotting utility (PLOT) that allows you to interpret pseudo-code
plot files generated by AVEVA programs and to translate them into a range of standard formats.
After translation, the plot file data may be sent either directly to a hardware device, such as a pen
plotter or laser printer, or to another file, or to a graphics screen.
PLOT handles both the file format translation process and the transmission of the resulting data to
a specified hardware device, including interaction with the output device where necessary to
ensure that data transmission protocol is correctly observed. PLOT can recognise source files in
any of the formats described in the following section and translate them into any of a wide.
Development Testing
Developers have carried out unit testing of each enhancement and/or fix in the development
environment to verify that any new functionalities have been correctly implemented and identified
defects have been corrected.
Regression tests have been run in the development environment to verify that enhancements
and/or fixes have not adversely affected the integrity of the product.
System Testing
Independent system testing has been carried out on the product, as released, to verify that it
installs correctly in all supported configurations and that product functionality operates as intended,
subject to any known exceptions listed below.
Acceptance Testing
This document has been prepared before Acceptance Testing. This product release will be
subjected to an acceptance test by AVEVAs Training and Product Support Group.
Any exceptions found during Acceptance Testing or after release will be reported in the Product
Release Latest Update Note on AVEVA's support web site
http://downloads.aveva.com/52333/w52333.pdf.
AVEVA intends to fix the defects listed below in a fix release or service pack as soon as reasonably
possible.
Incident Defect Description Recommended
number number Workaround
For the latest list of exceptions and other updates, please see the Product Release Latest Update
Note on AVEVA's support web site http://downloads.aveva.com/52333/w52333.pdf.