Professional Documents
Culture Documents
Water Supply
(Answer in Brief)
Name: Date:
____________________________________________________________________________________
1. What is the minimum hot & cold water pipe size required for toilets consists WC, WHB,
and BIDET & BATH TUB?
2. Where do you normally locate hot & cold water pipe in sanitary fixtures?
4. What type of pipe normally used for hot & cold water, if not specified?
Hot copper
CW UPVC clause E
5. What type of pipe normally used for U/G cold water pipe?
UPVC clause E
6. What is the minimum coverage required for the U/G water pipes?
1200mm
Page 1 of 4
Questionnaire
Water Supply
(Answer in Brief)
Water hammer occurs when water flowing through a pipeline is stopped abruptly, generating an
intense pressure surge that seeks relief throughout the system; including the piping, fixtures,
Water supply to the building direct from roof tank (by gravity force)
High points
150mm
14. Mention typical hot & cold water pipe connection size for following items?
WC - Hot 15 Cold 15
Page 2 of 4
Questionnaire
Water Supply
(Answer in Brief)
Water Tank
Calorifies placed in plant room / roof, hot water supply to the building and return goes to hot
19. What is the Isolating Valve & Where do you normally locate on residential building?
Control & isolate the water to toilet, & located above ceiling or 1500mm above FFL on wall.
20. What is hot water return & why it is required for central hot water system?
Hot water return is hot water returning from final fixture required to keep proper hot water
circulation.
21. What are the sleeve / openings required to show on water tank builders work detail?
CW incoming, O/F, Tank Drain, Access Cover, Level Indicator, CW Suction, Fire Suction, Tank
Page 3 of 4
Questionnaire
Water Supply
(Answer in Brief)
_____________________________ ______________________
Signature of Interviewer / Evaluator Designation
Page 4 of 4