Professional Documents
Culture Documents
HY 400 / HY 250 New Hose - U.S. Market only Pg. 168 - 169
z
y
www.partserver.com
Special Springs 2
INDEX
Index - ndice
I
N
Indice - Index - Inhaltsverzeichnis - Index - ndice - ndice D
E
X
Table - Tabla
How to read the catalog - Gua de lectura del catlogo
Miniature height, maximum force, hose cylinders with G1/8 charging port -
Mnima altura, mxima fuerza, cilindros conectados con agujero G1/8 gas
Easy manifold
Manifold System
Fixings - Bridas
Accessories - Accesorios
Benefits - Ventajas
Special Springs 3
Life Plus concept
SKUDO PATENT PENDING
SKUDO
NO SKUDO
UNMATCHED RELIABILITY
SKUDO case history NO SKUDO
Performance Model: HR 2400 - 125 AN Performance
>1.000.000 strokes Quantity: 4 pcs 40 - 80.000 strokes
Working stroke: 120 mm
and still working Stroke per minute: 27 only!
Benefits Ventajas
- SUPERLATIVE cylinder protection against contaminants solid and liquid. - MXIMA proteccin del cilindro contra contaminantes lquidos y slidos.
- Seals and guides protected. - Hermeticidad y guas protegidas.
- Overpressure eliminated. - Sobrepresin eliminada.
- Stop to corrosive liquids. - Stop a lquidos dainos.
- Saving of stamping costs. - Costes de moldeo reducidos.
- Value for money. - Value for money.
Special Springs 4
Life Plus concept
SAFETY PATENT PENDING
Over stroke - Ultra carrera
Benefits
O Exclusive built-in OVER STROKE ACTIVE SAFETY for discharging pressure
S completely ALWAYS BEFORE any impact to the body when the nominal stroke is overtaken.
Ventajas
A Presencia exclusiva de la SEGURIDAD ACTIVA DE FIN DE CARRERA para descargar la presin
S SIMEPRE ANTES de la colisin con el cuerpo del cilindro en caso de superar la carrera nominal mxima.
Benefits
O Exclusive built-in OVER STROKE ACTIVE SAFETY for discharging pressure
completely ALWAYS BEFORE any impact to the body when the nominal stroke is overtaken.
S
Ventajas
A Presencia exclusiva de la SEGURIDAD ACTIVA DE FIN DE CARRERA para descargar la presin
S SIMEPRE ANTES de la colisin con el cuerpo del cilindro en caso de superar la carrera nominal mxima.
If activated the over stroke safety devices the cylinder will be exhausted. Check always if the body of the cylinder is damaged
and ONLY in case of total absence of damages the cylinder can be recharged. Before the reinstallation of the cylinder in
the die, remove the cause of the over-stroke from the die. If the cylinder shows even a little damage verify it is completely
exhausted and then replace it with a new one ALWAYS.
En caso de activarse el dispositivo de seguridad de fin de carrera el cilindro se descargar. Comprobar si el cuerpo del cilin-
dro presenta algn tipo de dao, y recargarlo SOLO en el caso de que no se aprecie ningn dao. Antes de reposicionar el
cilindro verificar y eliminar del troquel la causa de que el cilindro haya hecho tope. Si el cuerpo del cilindro presenta daos,
incluso leves, verificar que est totalmente descargado y SUSTITUIR SIEMPRE por uno nuevo.
Special Springs 5
Life Plus concept
SAFETY PATENT PENDING
Over pressure - Ultra presin
Benefits
O Exclusive built-in OVER PRESSURE ACTIVE SAFETY for discharging pressure com-
pletely when it exceeds the maximum allowed value as fixed by Special Springs.
P
A
Ventajas
S Presencia exclusiva de SEGURIDAD ACTIVA ULTRA PRESIN para descargar la presin
interna cuando se supera el valor mximo definido por Special Springs.
If activated the over pressure safety devices the cylinder will be exhausted. Always replace it with a new one.
En caso de activarse el dispositivo de seguridad de ultra presin el cilindro se descargar. Sustituir siempre por uno nuevo.
Special Springs 6
Life Plus concept
DESIGN - LIFE DURABILITY
Benefits
- EXCLUSIVE and INNOVATIVE MONOLITHIC DESIGN of all mechanical components and absence of welded and threaded parts.
- UNLIMITED FATIGUE DURABILITY is guaranteed for the Special Springs cylinders with a minimum of 2.000.000 strokes*.
- All structural calculations have been made according to FKM codes, EN 13445 norm and complete FEM analysis.
- Design and production of Special Springs' cylinders are made according to the European Directive PED 97/23/EC.
- Extensive and accelerate fatigue tests on the structure of each components have validated the projects.
Ventajas
- EXCLUSIVO E INNOVADOR DISEO MONOLTICO de todos los componentes mecnicos con ausencia de partes soldadas y roscadas.
- RESISTENCIA ILIMITADA A LA FATIGA en los cilindros Special Springs con un mnimo de 2.000.000 de ciclos.
- Clculos estructurales segn cdigos FKM, norma EN 13445 y anlisis completo FEM.
- La proyeccin y produccin de los cilindros Special Springs se realizan de acuerdo a la Directiva Europea PED 97/23/EC.
- La resistencia estructural de cada componente est controlada con intensas pruebas de fatiga acelerada.
Long life
improved design FKM - FEM
Special Springs 7
EXAMPLE PAGE
1 1 Model 2 Max charging pressure
SC 1500 Modelo Presin mx de carga
Special Springs 8
ISO 11901 ISO 11901 Standard
VDI 3003
CNOMO E24.54815.N
3 Min charging pressure 4 Rod/piston seal area
Presin mn de carga rea de estanqueidad vstago/pistn
7 G 1/8"
12
.22
5,5
M8 x 13 (4x)
36 5 Working temperature 6 Pressure medium
1.42 Temperatura de funcionamiento Gas de carga
M8
Force (daN)
Ra < 0,05
HV ~ 1000 40
Cu
1.57
7 Directive 97/23/EC + Standard 8 Code
Directiva 97/23/EC + Standard Cdigo
3
.12
Cu (mm)
.71
18
R 2,5 9 Initial force at 20C 10 Initial gas volume
.01
70 Fuerza inicial 20C Volume de gaz initial
.1
L 0,25
2.75
L min
67 11 Connectable cylinders code and connection standard 12 Force increase by stroke
(Cycles / min)
2.64
5
.2
(Cycles x millions)
Cdigo cilindros conectables y estndar de conexin Diagrama de fuerza en funcin del recorrido
8
.31
13
.41
10,5
2.95 .01
Cu (mm) 13 Min. estimated life and max. recommended speed 14 Fixings
Fixings Indicacin de duracin mn. y cadencia mx. aconsejada Bridas
(10) SC 1500-050-B
14 + 1,0
+ 1,0 Body + 0,5
(10) SC 1500-050-B-N Body + 0,5 + .04
+ .04 + .02
+ .02 Bottom mount FS2 75 FC 75 A
Drop-ln FB 75 - FBA 75 FS2A 75 FCQ 75 A FSA 75
5 6 2 3 4
X
Max. Speed F C P max P min S Maintenance kit
32 0 150 bar 20 bar 10,18 cm2 Z
1,8 m/s - - N2 Y 39BMSC01500B
176 80 2175 psi 290 psi 1.578 in.2
How to read the catalog - Gua de lectura del catlogo
Technical specifications
SC 1500 - 025 - B 25 .98 160 6.3 135 5.31 151 9.21 SC 1500 - 025 - B - N ~3,64 ~8.03
SC 1500 - 038 - B 38 1.50 186 7.32 148 5.83 194 11.84 SC 1500 - 038 - B - N ~3,91 ~8.63
SC 1500 - 050 - B 50 1.97 210 8.27 160 6.3 233 14.22 SC 1500 - 050 - B - N ~4,15 ~9.16
SC 1500 - 063 - B 63 2.48 237 9.33 173,5 6.83 1530 278 16.96 SC 1500 - 063 - B - N ~4,47 ~9.87
SC 1500 - 080 - B 80 3.15 270 10.63 190 7.48 3442 333 20.32 SC 1500 - 080 - B - N ~4,81 ~10.62
SC 1500 - 100 - B 100 3.94 310 12.20 210 8.27 400 24.41 SC 1500 - 100 - B - N ~5,22 ~11.52
5%
HOW TO READ THE CATALOG
SC 1500 - 125 - B 125 4.92 360 14.17 235 9.25 ( +20 C +68F ) 483 29.47 SC 1500 - 125 - B - N ~5,75 ~12.69
SC 1500 - 160 - B 160 6.3 430 16.93 270 10.63 599 36.55 SC 1500 - 160 - B - N ~6,33 ~13.97 Tutte le dimensioni senza tolleranza si intendono nominali.
SC 1500 - 200 - B 200 7.87 510 20.08 310 12.20 731 44.61 SC 1500 - 200 - B - N ~7,34 ~16.20 All dimensions are nominal unless tolerance is stated.
SC 1500 - 250 - B 250 9.84 610 24.02 360 14.17 897 54.74 SC 1500 - 250 - B - N ~8,50 ~18.76 Alle Massgangen ohne Toleranzen sind Nennmasse.
SC 1500 - 300 - B 300 11.81 710 27.95 410 16.14 1063 64.87 SC 1500 - 300 - B - N ~9,60 ~21.19 Sauf specifications de tolerances, totes le dimensions sont des valeurs nominales.
Info pg. 185
Todas las dimensiones son nominales excepto cuando se indica la tolerancia.
Todas as medidas so nominalis excepto quando la tolerancia mencionada.
Special Springs 84
T
? A
B
Special Springs 9
SELECTION TAB
Fo
Cu
rCu
L
SKUDO
OSAS
OPAS
Fo
inch mm Lb. daN inch mm inch mm inch mm
- M 16 x 1,5 NE 16 6.3 - 95 2,8 - 42 0.39 - 3.94 10 - 100 - - 3.15 - 10.24 80 - 260 - - -
0.75 19 M 90 11 - 203 5 - 90 0.28 - 4.92 7 - 125 0.04 1 2.20 - 8.07 56 - 295 - -
- M24 x 1,5 NE 24 25 - 382 11 - 170 0.39 - 3.94 10 - 100 - - 3.15 - 10.24 80 - 260 - - -
- M24 x 1,5 M 90 TBM 11 - 203 5 - 90 0.28 - 4.92 7 - 125 - - 2.20 - 8.07 56 - 295 - -
- M24 x 1,5 M 90 TEM 11 - 203 5 - 90 0.28 - 4.92 7 - 125 - - 2.20 - 8.07 56 - 295 - -
1" - 8 THD - M 90 TBI 11 - 203 5 - 90 0.28 - 4.92 7 - 125 - - 2.20 - 8.07 56 - 295 - -
0.98 25 M 200 38 - 450 17 - 200 0.28 - 4.92 7 - 125 0.04 1 2.20 - 8.07 56 - 295 - -
0.98 25 HR 200 450 200 0.20 - 1.26 5 - 32 0.04 1 1.57 - 3.70 40 - 94 - - -
0.98 25 ML 300 697 310 0.39 - 3.15 10 - 80 0.08 2 2.95 - 8.66 75 - 220 - - -
0.98 25 KE 400 956 425 0.39 - 1.97 10 - 50 0.04 1 2.76 - 7.68 70 - 195 - -
1.26 32 SC 150 383 170 0.39 - 4.92 10 - 125 0.08 2 2.76 - 11.81 70 - 300 - - -
1.26 32 H 300 675 300 0.39 - 4.92 10 - 125 0.08 2 2.76 - 11.81 70 - 300 - - -
1.26 32 HR 300 675 300 0.20 - 4.92 5 - 125 0.04 1 1.57 - 11.02 40 - 280 - - -
1.26 32 RV 350 810 360 0.39 - 4.92 10 - 125 0.08 2 1.97 - 6.10 50 - 155 - -
1.26 32 ML 500 1147 510 0.39 - 3.15 10 - 80 0.08 2 2.95 - 8.86 75 - 225 - - -
1.26 32 KE 750 1665 740 0.39 - 1.97 10 - 50 0.04 1 2.95 - 7.68 75 - 195 - -
1.50 38 SC 250 585 260 0.39 - 4.92 10 - 125 0.08 2 2.76 - 11.81 70 - 300 - - -
1.50 38 H 500 1058 470 0.39 - 4.92 10 - 125 0.08 2 2.76 - 11.81 70 - 300 - - -
1.50 38 HR 500 1058 470 0.20 - 4.92 5 - 125 0.04 1 1.57 - 11.02 40 - 280 - - -
1.50 38 RV 500 1058 470 0.39 - 4.92 10 - 125 0.08 2 1.97 - 11.02 50 - 280 - -
1.50 38 ML 1000 2205 980 0.39 - 3.15 10 - 80 0.08 2 2.95 - 9.45 75 - 240 - -
1.50 38 KE 1000 2385 1060 0.24 - 1.97 6 - 50 0.04 1 2.40 - 9.06 61 - 230 -
- M 38 x 1,5 SCF 250 585 260 0.39 - 4.92 10 - 125 0.08 2 2.76 - 11.81 70 - 300 - - -
- M 38 x 1,5 HF 500 1058 470 0.39 - 4.92 10 - 125 0.08 2 2.76 - 11.81 70 - 300 - - -
- M 38 x 1,5 HRF 500 1058 470 0.20 - 4.92 5 - 125 0.04 1 1.57 - 11.02 40 - 280 - - -
1.77 45 LI 400 900 400 0.51 - 3.94 13 - 100 0.04 1 2.28 - 9.13 58 - 232 - - -
1.77 45 S 500 1058 470 0.24 - 4.92 6 - 125 0.08 2 2.44 - 11.81 62 - 300 - - -
1.77 45 SC 500 1058 470 0.51 - 6.30 13 - 160 0.08 2 4.35 - 15.94 110,4 - 405 - - -
1.77 45 H 700 1530 680 0.51 - 6.30 13 - 160 0.08 2 4.35 - 15.94 110,4 - 405 - - -
1.77 45 HR 700 1530 680 0.39 - 4.92 10 - 125 0.04 1 2.05 - 11.10 52 - 282 - - -
1.77 45 RV 750 1665 740 0.51 - 4.92 13 - 125 0.08 2 2.05 - 11.10 52 - 282 - -
1.77 45 RF 750 1665 740 0.39 - 4.92 10 - 125 0.08 2 2.44 - 11.50 62 - 292 - -
- M45 X 1,5 SCF 500 1058 470 0.51 - 6.30 13 - 160 0.08 2 4.35 - 15.94 110,4 - 405 - - -
- M45 X 1,5 HF 700 1530 680 0.51 - 6.30 13 - 160 0.08 2 4.35 - 15.94 110,4 - 405 - - -
- M45 X 1,5 HRF 700 1530 680 0.39 - 4.92 10 - 160 0.04 1 2.05 - 11.10 52 - 282 - - -
Special Springs 10
SELECTION TAB
SKUDO
T
OSAS
OPAS
Fo ? A
inch mm Lb. daN inch mm inch mm inch mm B
1.97 50 SC 750 1665 740 0.51 - 11.81 13 - 300 0.12 3 4.74 - 27.36 120,4 - 695 - - -
1.97 50 S 750 1665 740 0.24 - 4.92 6 - 125 0.12 3 2.44 - 11.81 62 - 300 - - -
1.97 50 RV 1000 2081 925 0.51 - 4.92 13 - 125 0.12 3 2.52 - 11.34 64 - 288 - -
1.97 50 RF 1000 2081 925 0.51 - 4.92 13 - 125 0.12 3 2.91 - 11.73 74 - 298 - -
1.97 50 H 1000 2385 1060 0.51 - 11.81 13 - 300 0.12 3 4.74 - 27.36 120,4 - 695 - - -
1.97 50 HR 1000 2385 1060 0.39 - 4.92 10 - 125 0.04 1 2.28 - 11.34 58 - 288 - - -
1.97 50 KE 1800 4241 1885 0.24 - 1.97 6 - 50 0.04 1 2.60 - 8.66 66 - 220
1.97 50 ML 1800 4335 1925 0.59 - 3.15 15 - 80 0.12 3 3.74 - 9.65 95 - 245 - -
- M50 X 1,5 SCF 750 1665 740 0.51 - 11.81 13 - 300 0.12 3 4.74 - 27.36 120,4 - 695 - - -
- M50 X 1,5 HF 1000 2385 1060 0.51 - 11.81 13 - 300 0.12 3 4.74 - 27.36 120,4 - 695 - - -
2.48 63 LI 900 2027 900 0.98 - 4.92 25 - 125 0.04 1 3.70 - 11.57 94 - 294 - - -
2.48 63 RV 1500 3442 1530 0.51 - 4.92 13 - 125 0.12 3 2.76 - 11.57 70 - 294 - -
2.48 63 RF 1500 3442 1530 0.51 - 4.92 13 - 125 0.12 3 3.15 - 11.97 80 - 304 - -
2.48 63 HR 1500 3442 1530 0.39 - 4.92 10 - 125 0.04 1 2.52 - 11.57 64 - 294 - - -
2.48 63 KE 3000 6626 2945 0.39 - 1.97 10 - 50 0.04 1 3.35 - 8.07 85 - 205
2.95 75 LI 1400 3175 1410 0.98 - 4.92 25 - 125 0.04 1 3.74 - 11.61 95 - 295 - - -
2.95 75 SC 1500 3442 1530 0.98 - 11.81 25 - 300 0.12 3 6.30 - 27.95 160 - 710 - - -
2.95 75 S 1500 3442 1530 0.98 - 3.94 25 - 100 0.12 3 4.33 - 10.24 110 - 260 - -
2.95 75 LS 1500 3577 1590 0.98 - 11.81 25 - 300 0.12 3 6.30 - 27.95 160 - 710 - - -
2.95 75 H 2400 5366 2385 0.98 - 11.81 25 - 300 0.12 3 6.30 - 27.95 160 - 710 - - -
2.95 75 LS 2400 5366 2385 0.98 - 11.81 25 - 300 0.12 3 6.30 - 27.95 160 - 710 - - -
2.95 75 HR 2400 5366 2385 0.39 - 4.92 10 - 125 0.04 1 2.56 - 11.61 65 - 295 - - -
2.95 75 RV 2400 5366 2385 0.63 - 4.92 16 - 125 0.12 3 3.03 - 11.61 77 - 295 -
2.95 75 RF 2400 5366 2385 0.63 - 4.92 16 - 125 0.12 3 3.43 - 12.00 87 - 305 -
2.95 75 KE 4700 10518 4675 0.39 - 1.97 10 - 50 0.04 1 3.15 - 9.45 80 - 240
2.95 75 ML 4700 11081 4925 0.59 - 3.15 15 - 80 0.12 3 3.94 - 9.84 100 - 250 - -
3.74 95 LI 2000 4579 2035 0.98 - 4.92 25 - 125 0.04 1 4.53 - 12.40 115 - 315 - - -
3.74 95 S 3000 6626 2945 0.98 - 3.94 25 - 100 0.12 3 4.72 - 10.63 120 - 270 - -
3.74 95 SC 3000 6626 2945 0.98 - 11.81 25 - 300 0.12 3 6.69 - 28.35 170 - 720 - - -
3.74 95 LS 3000 6374 2830 0.98 - 11.81 25 - 300 0.12 3 6.69 - 28.35 170 - 720 - - -
3.74 95 RV 4200 9540 4240 0.63 - 4.92 16 - 125 0.12 3 3.54 - 12.12 90 - 308 -
3.74 95 H 4200 9540 4240 0.98 - 11.81 25 - 300 0.12 3 6.69 - 28.35 170 - 720 - - -
3.74 95 LS 4200 9540 4240 0.98 - 11.81 25 - 300 0.12 3 6.69 - 28.35 170 - 720 - - -
3.74 95 HR 4200 9540 4240 0.63 - 4.92 16 - 125 0.04 1 3.82 - 12.40 97 - 315 - - -
3.74 95 KE 7500 16965 7540 0.39 - 1.97 10 - 50 0.04 1 3.54 - 10.04 90 - 255
3.74 95 ML 7500 17325 7700 0.59 - 3.15 15 - 80 0.12 3 4.53 - 10.24 115 - 260 - -
4.72 120 LI 3200 7162 3180 0.98 - 4.92 25 - 125 0.04 1 4.92 - 12.80 125 - 325 - - -
4.72 120 SC 5000 11205 4980 0.98 - 11.81 25 - 300 0.12 3 7.48 - 29.13 190 - 740 - - -
4.72 120 H 6600 14920 6630 0.98 - 11.81 25 - 300 0.12 3 7.48 - 29.13 190 - 740 - - -
4.72 120 HR 6600 14920 6630 0.63 - 4.92 16 - 125 0.04 1 4.21 - 12.80 107 - 325 - - -
4.72 120 RV 6600 14920 6630 0.63 - 4.92 16 - 125 0.12 3 3.94 - 12.52 100 - 318 -
4.72 120 KE 12000 26505 11780 0.39 - 1.97 10 - 50 0.04 1 3.54 - 8.27 90 - 210
4.72 120 ML 12000 28620 12720 0.59 - 3.15 15 - 80 0.12 3 4.53 - 10.43 115 - 265 - -
5.90 150 SC 7500 16875 7540 0.98 - 11.81 25 - 300 0.12 3 8.07 - 29.72 205 - 755 - - -
5.90 150 RV 9500 21465 9540 0.75 - 4.92 19 - 125 0.12 3 4.57 - 12.91 116 - 328 -
5.90 150 HR 11800 26510 11780 0.75 - 4.92 19 - 125 0.12 3 4.57 - 12.91 116 - 328 - - -
5.90 150 KE 18500 41422 18410 0.39 - 1.97 10 - 50 0.04 1 4.33 - 10.63 110 - 270
7.68 195 SC 10000 23850 10600 0.98 - 11.81 25 - 300 0.12 3 8.27 - 29.92 210 - 760 - - -
7.68 195 H 18500 41440 18400 0.98 - 11.81 25 - 300 0.12 3 8.27 - 29.92 210 - 760 - - -
Special Springs 11
NE SERIES
VDI 3004 Gas ejectors - Eyectores de gas
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
NE 16 M 16 x 1,5 - 10 - 100 0.39 - 3.94 2.8 - 42 6.3 - 95 - - -
NE 24 M 24 x 1,5 - 10 - 100 0.39 - 3.94 11 - 170 25 - 382 - - -
Special Springs 12
XXXX16
NE
Gas ejectors - Eyectores de gas VDI 3004
1,5 x Fo
1,4 x Fo
Force (daN)
1,3 x Fo
6 Ra < 0,05
.24
HV ~ 1000
1,2 x Fo
NE
1,1 x Fo
3
Cu
3,5
.14
.12 Fo
10 20 30 40 50 60 70 80 100
Cu (mm)
1.38
35
(Cycles x millions)
(Cycles / min)
M 16 x 1,5
14 M6
.55 Cu (mm)
Fixings
DM 16
Threaded cylinders have NO stroke extension. It is recommended NOT to exceed 90% of the nominal stroke Cu.
Los cilindros roscados NO tienen reserva de carrera. Es importante NO superar el 90% de la carrera nominal Cu.
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
Special Springs 13
NE 24
VDI 3004 Gas ejectors - Eyectores de gas
2,2 x Fo
2,0 x Fo
1,8 x Fo
Force (daN)
12 1,6 x Fo
Ra < 0,05
.47
HV ~ 1000 1,4 x Fo
1,2 x Fo
3
Cu
1.38
3,5
.12 Fo
10 20 30 40 50 60 70 80 100
Cu (mm)
1.57
40
(Cycles x millions)
(Cycles / min)
M 24 x 1,5
22 M6
.87 Cu (mm)
Fixings
DM 24
Threaded cylinders have NO stroke extension. It is recommended NOT to exceed 90% of the nominal stroke Cu.
Los cilindros roscados NO tienen reserva de carrera. Es importante NO superar el 90% de la carrera nominal Cu.
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
Special Springs 14
NE
Special Springs 15
M SERIES
ISO 11901 Mini cylinders - Mini cilindros
VDI 3003 M 90
Color P Fo
Code bar psi
+20 C +68 F
daN (5%) Lb (5%)
OR 10 145 5 11
PR 20 290 10 22
GR 60 870 30 67
BU 100 1450 50 112
RD 140 2030 70 157
YW 180 2610 90 203
BK 10180 145-2610 590 11-203
M 200
Color P Fo
Code bar psi
+20 C +68 F
daN (5%) Lb (5%)
OR 15 217.5 17 38
PR 25 362.5 28 63
GR 45 652.5 50 112
BU 90 1305 100 225
RD 135 1958 150 337
YW 180 2610 200 450
BK 15 180 217.5-2610 17 200 38-450
Over
Pressure
Active
Safety
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
M90 19 0.75 7 - 125 0.28 - 4.92 5 - 90 11 - 203 - -
M90TBM M24 x 1,5 - 7 - 125 0.28 - 4.92 5 - 90 11 - 203 - -
M90TEM M24 x 1,5 - 7 - 125 0.28 - 4.92 5 - 90 11 - 203 - -
M90TBI - 1"-8 THD 7 - 125 0.28 - 4.92 5 - 90 11 - 203 - -
M200 25 0.98 7 - 125 0.28 - 4.92 17 - 200 38 - 450 - -
Special Springs 16
M 90
Mini cylinders - Mini cilindros ISO 11901
VDI 3003
.31 M6 x 6
Ra < 0,05
HV ~ 1000
Cu
.04 1,5 x Fo
1
M
1,4 x Fo
Force (daN)
17
1,3 x Fo
.67
17
.67
L 0,25
1,2 x Fo
.01
L min
.04
1,1 x Fo
R1
Fo
7 10 15 25 38 50 63 80 100 125
13
.04
Cu (mm)
R1
17
.67
.20
5
19 0,25 M6
.75 .01
Fixings
(10) M90-050-A-YW
Technical specifications
connecting
Code Cu L Lmin hole M6 Color P Fo
Code +20 C +68 F
Micro hose bar psi daN Lb
mm inch mm inch mm inch kg lb (5%) (5%)
M90 - 007 - A - .. 7 0.28 56 2.20 49 1.93 M90 - 007 - A - N ~0,07 ~0.16 OR 10 145 5 11
M90 - 010 - A - .. 10 0.39 62 2.44 52 2.05 M90 - 010 - A - N ~0,07 ~0.16 PR 20 290 10 22
M90 - 013 - A - .. 13 0.51 67,4 2.65 54,7 2.15 M90 - 013 - A - N ~0,08 ~0.16 GR 60 870 30 67
M90 - 015 - A - .. 15 0.59 72 2.83 57 2.24 M90 - 015 - A - N ~0,08 ~0.18 BU 100 1450 50 112
M90 - 025 - A - .. 25 0.98 92 3.62 67 2.64 M90 - 025 - A - N ~0,09 ~0.20 RD 140 2030 70 157
M90 - 038 - A - .. 38 1.50 118 4.65 80 3.15 M90 - 038 - A - N ~0,11 ~0.24 YW 180 2610 90 203
M90 - 050 - A - .. 50 1.97 142 5.59 92 3.62 M90 - 050 - A - N ~0,12 ~0.27 BK 10180 145-2610 590 11-203
M90 - 063 - A - .. 63 2.48 172 6.77 109 4.29 M90 - 063 - A - N ~0,14 ~0.31
M90 - 080 - A - .. 80 3.15 205 8.07 125 4.92 M90 - 080 - A - N ~0,15 ~0.33 S = rod section area
M90 - 100 - A - .. 100 3.94 245 9.65 145 5.71 M90 - 100 - A - N ~0,17 ~0.38 P = nominal charging pressure
M90 - 125 - A - .. 125 4.92 295 11.6 170 6.69 M90 - 125 - A - N ~0,20 ~0.44 Fo = nominal initial force
Info pg. 185
Special Springs 17
M90 TBM
threaded
Mini cylinders - Mini cilindros
1,5 x Fo
8
1,4 x Fo
.31 Ra < 0,05
HV ~ 1000
Force (daN)
1,3 x Fo
Cu
1,2 x Fo
1,1 x Fo
Fo
cod. TBT 7 10 15 25 38 50 63 80 100 125
1.57
40
13
(optional)
L 0,25
.01
Cu (mm)
L min
Fixings
M24 x 1,5
.04
17
R1
.67
DM 24
.20
5
(10) M90-050-A-YW-TBM
M6 x 6
19 0,25
.75 .01
(10) M90-050-A-N-YW-TBM
Threaded cylinders have NO stroke extension. It is recommended NOT to exceed 90% of the nominal stroke Cu.
Los cilindros roscados NO tienen reserva de carrera. Es importante NO superar el 90% de la carrera nominal Cu.
Technical specifications
connecting
Code Cu L Lmin hole M6 Color P Fo
Code +20 C +68 F
Micro hose daN Lb
mm inch mm inch mm inch kg lb bar psi
(5%) (5%)
M90 - 007 - A - .. 7 0.28 56 2.20 49 1.93 M90 - 007 - A - N ~0,07 ~0.16 OR 10 145 5 11
M90 - 010 - A - .. 10 0.39 62 2.44 52 2.05 M90 - 010 - A - N ~0,07 ~0.16 PR 20 290 10 22
M90 - 013 - A - .. 13 0.51 67,4 2.65 54,7 2.15 M90 - 013 - A - N ~0,08 ~0.16 GR 60 870 30 67
M90 - 015 - A - .. 15 0.59 72 2.83 57 2.24 M90 - 015 - A - N ~0,08 ~0.18 BU 100 1450 50 112
M90 - 025 - A - .. 25 0.98 92 3.62 67 2.64 M90 - 025 - A - N ~0,09 ~0.20 RD 140 2030 70 157
M90 - 038 - A - .. 38 1.50 118 4.65 80 3.15 M90 - 038 - A - N ~0,11 ~0.24 YW 180 2610 90 203
M90 - 050 - A - .. 50 1.97 142 5.59 92 3.62 M90 - 050 - A - N ~0,12 ~0.27 BK 10180 145-2610 590 11-203
M90 - 063 - A - .. 63 2.48 172 6.77 109 4.29 M90 - 063 - A - N ~0,14 ~0.31
M90 - 080 - A - .. 80 3.15 205 8.07 125 4.92 M90 - 080 - A - N ~0,15 ~0.33 S = rod section area
M90 - 100 - A - .. 100 3.94 245 9.65 145 5.71 M90 - 100 - A - N ~0,17 ~0.38 P = nominal charging pressure
M90 - 125 - A - .. 125 4.92 295 11.6 170 6.69 M90 - 125 - A - N ~0,20 ~0.44 Fo = nominal initial force
Info pg. 185
Special Springs 18
M90 TEM
threaded
Mini cylinders - Mini cilindros
1,5 x Fo
8
1,4 x Fo
.31 Ra < 0,05
HV ~ 1000
Force (daN)
S 25
1,3 x Fo
Cu
1,2 x Fo
.20
5
M
1,1 x Fo
Fo
7 10 15 25 38 50 63 80 100 125
13
1.57
40
L 0,25
.01
Cu (mm)
L min
Fixings
M24 x 1,5
.04
17
R1
.67
DM 24
.20
5
(10) M90-050-A-YW-TEM
M6 x 6
19 0,25
.75 .01
(10) M90-050-A-N-YW-TEM
Threaded cylinders have NO stroke extension. It is recommended NOT to exceed 90% of the nominal stroke Cu.
Los cilindros roscados NO tienen reserva de carrera. Es importante NO superar el 90% de la carrera nominal Cu.
Technical specifications
connecting
Code Cu L Lmin hole M6 Color P Fo
Code +20 C +68 F
Micro hose daN Lb
mm inch mm inch mm inch kg lb bar psi
(5%) (5%)
M90 - 007 - A - .. 7 0.28 56 2.20 49 1.93 M90 - 007 - A - N ~0,07 ~0.16 OR 10 145 5 11
M90 - 010 - A - .. 10 0.39 62 2.44 52 2.05 M90 - 010 - A - N ~0,07 ~0.16 PR 20 290 10 22
M90 - 013 - A - .. 13 0.51 67,4 2.65 54,7 2.15 M90 - 013 - A - N ~0,08 ~0.16 GR 60 870 30 67
M90 - 015 - A - .. 15 0.59 72 2.83 57 2.24 M90 - 015 - A - N ~0,08 ~0.18 BU 100 1450 50 112
M90 - 025 - A - .. 25 0.98 92 3.62 67 2.64 M90 - 025 - A - N ~0,09 ~0.20 RD 140 2030 70 157
M90 - 038 - A - .. 38 1.50 118 4.65 80 3.15 M90 - 038 - A - N ~0,11 ~0.24 YW 180 2610 90 203
M90 - 050 - A - .. 50 1.97 142 5.59 92 3.62 M90 - 050 - A - N ~0,12 ~0.27 BK 10180 145-2610 590 11-203
M90 - 063 - A - .. 63 2.48 172 6.77 109 4.29 M90 - 063 - A - N ~0,14 ~0.31
M90 - 080 - A - .. 80 3.15 205 8.07 125 4.92 M90 - 080 - A - N ~0,15 ~0.33 S = rod section area
M90 - 100 - A - .. 100 3.94 245 9.65 145 5.71 M90 - 100 - A - N ~0,17 ~0.38 P = nominal charging pressure
M90 - 125 - A - .. 125 4.92 295 11.6 170 6.69 M90 - 125 - A - N ~0,20 ~0.44 Fo = nominal initial force
Info pg. 185
Special Springs 19
M90 TBI
threaded
Mini cylinders - Mini cilindros
1,5 x Fo
8
1,4 x Fo
.31 Ra < 0,05
HV ~ 1000
Force (daN)
1,3 x Fo
Cu
1,2 x Fo
1,1 x Fo
Fo
cod. TBT 7 10 15 25 38 50 63 80 100 125
40
1.57
13
(optional)
L 0,25
Cu (mm)
.01
L min
Fixings
1"- 8THD
.04
17
R1
.67
DI 1-8
.20
5
(10) M90-050-A-YW-TBI
M6 x 6
19 0,25
.75 .01 (10) M90-050-A-N-YW-TBI
Threaded cylinders have NO stroke extension. It is recommended NOT to exceed 90% of the nominal stroke Cu.
Los cilindros roscados NO tienen reserva de carrera. Es importante NO superar el 90% de la carrera nominal Cu.
Technical specifications
connecting
Code Cu L Lmin hole M6 Color P Fo
Code +20 C +68 F
Micro hose bar psi daN Lb
mm inch mm inch mm inch kg lb (5%) (5%)
M90 - 007 - A - .. 7 0.28 56 2.20 49 1.93 M90 - 007 - A - N ~0,07 ~0.16 OR 10 145 5 11
M90 - 010 - A - .. 10 0.39 62 2.44 52 2.05 M90 - 010 - A - N ~0,07 ~0.16 PR 20 290 10 22
M90 - 013 - A - .. 13 0.51 67,4 2.65 54,7 2.15 M90 - 013 - A - N ~0,08 ~0.16 GR 60 870 30 67
M90 - 015 - A - .. 15 0.59 72 2.83 57 2.24 M90 - 015 - A - N ~0,08 ~0.18 BU 100 1450 50 112
M90 - 025 - A - .. 25 0.98 92 3.62 67 2.64 M90 - 025 - A - N ~0,09 ~0.20 RD 140 2030 70 157
M90 - 038 - A - .. 38 1.50 118 4.65 80 3.15 M90 - 038 - A - N ~0,11 ~0.24 YW 180 2610 90 203
M90 - 050 - A - .. 50 1.97 142 5.59 92 3.62 M90 - 050 - A - N ~0,12 ~0.27 BK 10180 145-2610 590 11-203
M90 - 063 - A - .. 63 2.48 172 6.77 109 4.29 M90 - 063 - A - N ~0,14 ~0.31
M90 - 080 - A - .. 80 3.15 205 8.07 125 4.92 M90 - 080 - A - N ~0,15 ~0.33 S = rod section area
M90 - 100 - A - .. 100 3.94 245 9.65 145 5.71 M90 - 100 - A - N ~0,17 ~0.38 P = nominal charging pressure
M90 - 125 - A - .. 125 4.92 295 11.6 170 6.69 M90 - 125 - A - N ~0,20 ~0.44 Fo = nominal initial force
Info pg. 185
Special Springs 20
M 200
Mini cylinders - Mini cilindros ISO 11901
VDI 3003
12
.47 Ra < 0,05 M6 x 6
HV ~ 1000
Cu
1,5 x Fo
.04
1
M
1,4 x Fo
Force (daN)
17
.67
1,3 x Fo
23
.90
1,2 x Fo
L 0,25
.01
L min
.04
1,1 x Fo
R1
Fo
7 10 15 25 38 50 63 80 100 125
13
.04
23
R1
Cu (mm)
.90
5
.20
25 0,25 M6
.98 .01
Fixings
(10) M200-050-A-YW
Technical specifications
connecting
Code Cu L Lmin hole M6 Color P Fo
Code +20 C +68 F
Micro hose bar psi daN Lb
mm inch mm inch mm inch kg lb (5%) (5%)
M200 - 007 - A - .. 7 0.28 56 2.20 49 1.93 M200 - 007 - A - N ~0,12 ~0,27 OR 15 217.5 17 38
M200 - 010 - A - .. 10 0.39 62 2.44 52 2.05 M200 - 010 - A - N ~0,13 ~0,29 PR 25 362.5 28 63
M200 - 013 - A - .. 13 0.51 67,4 2.65 54,7 2.15 M200 - 013 - A - N ~0,13 ~0,29 GR 45 652.5 50 112
M200 - 015 - A - .. 15 0.59 72 2.83 57 2.24 M200 - 015 - A - N ~0,14 ~0,31 BU 90 1305 100 225
M200 - 025 - A - .. 25 0.98 92 3.62 67 2.64 M200 - 025 - A - N ~0,16 ~0,36 RD 135 1958 150 337
M200 - 038 - A - .. 38 1.50 118 4.65 80 3.15 M200 - 038 - A - N ~0,19 ~0,40 YW 180 2610 200 450
M200 - 050 - A - .. 50 1.97 142 5.59 92 3.62 M200 - 050 - A - N ~0,20 ~0,44 BK 15 180 217.5-2610 17 200 38-450
M200 - 063 - A - .. 63 2.48 172 6.77 109 4.27 M200 - 063 - A - N ~0,23 ~0,51
M200 - 080 - A - .. 80 3.15 205 8.07 125 4.92 M200 - 080 - A - N ~0,26 ~0,58 S = rod section area
M200 - 100 - A - .. 100 3.94 245 9.65 145 5.71 M200 - 100 - A - N ~0,30 ~0,67 P = nominal charging pressure
M200 - 125 - A - .. 125 4.92 295 11.61 170 6.69 M200 - 125 - A - N ~0,34 ~0,75 Fo = nominal initial force
Info pg. 185
Special Springs 21
RV SERIES
B83180220000004 (Mercedes-Benz) Miniature height, maximum force -Mnima altura, mxima fuerza
E24.54.815.G (PSA-Renault)
VDI D003
Over
Stroke
Over Active
Pressure Safety
Active
Safety
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
RV 350 32 1.26 10 - 125 0.39 - 4.92 360 810 - -
RV 500 38 1.50 10 - 125 0.39 - 4.92 470 1058 - -
RV 750 45 1.77 10 - 125 0.39 - 4.92 740 1665 - -
RV 1000 50 1.97 13 - 125 0.51 - 4.92 920 2070 - -
RV 1500 63 2.48 13 - 125 0.51 - 4.92 1530 3442 - -
RV 2400 75 2.95 16 - 125 0.93 - 4.92 2385 5366 -
RV 4200 95 3.74 16 - 125 0.93 - 4.92 4240 9540 -
RV 6600 120 4.72 16 - 125 0.93 - 4.92 6630 14920 -
RV 9500 150 5.90 19 - 125 0.75 - 4.92 9540 21465 -
Special Springs 22
RV 350
Miniature height, maximum force - B83180220000004 (Mercedes-Benz)
Mnima altura, mxima fuerza E24.54.815.G (PSA-Renault)
VDI D003
560
3,6
540
.14
M6 520
500
Force (daN)
M6 x 6 (2x)
480
460
16
440
.63
420
M6
400
Ra < 0,05 20
380
HV ~ 1000 .79
360
Cu
10 16 25 38 50 63 80 100 125
13 19 32 75
over stroke bushing
.08
Cu (mm) RV
2
(Cycles / min)
1.18 .04
27
3,5
.14
1.06
.24
6
4
.16
32 0,3
1.26 .01
Cu (mm)
Fixings
(10) RV350-050-A
(10) RV350-050-A-N
+ 1.0
+ 1.0 + 0.5
+ 0.5 Body
Body + .04
+ .04
+ .02
+ .02
Drop-ln FS2A 32 FC 32 A FSA 32
Technical specifications
RV 350 - 010 - A 10 0.39 50 1.97 40 1.57 7,8 0.47 RV 350 - 010 - A - N ~0,162 ~0.36
RV 350 - 013 - A 13 0.51 56 2.20 43 1.69 9,7 0.59 RV 350 - 013 - A - N ~0,173 ~0.38
RV 350 - 016 - A 16 0.63 62 2.44 46 1.81 11,6 0.71 RV 350 - 016 - A - N ~0,182 ~0.40
RV 350 - 019 - A 19 0.75 68 2.68 49 1.93 13,4 0.82 RV 350 - 019 - A - N ~0,191 ~0.42
RV 350 - 025 - A 25 0.98 80 3.15 55 2.17 360 17,2 1.05 RV 350 - 025 - A - N ~0,209 ~0.46
RV 350 - 032 - A 32 1.26 94 3.70 62 2.44 810 21,6 1.32 RV 350 - 032 - A - N ~0,230 ~0.51
RV 350 - 038 - A 38 1.50 106 4.17 68 2.68 25,3 1.54 RV 350 - 038 - A - N ~0,249 ~0.55
RV 350 - 050 - A
RV 350 - 063 - A
50
63
1.97
2.48
130
156
5.12
6.14
80
93
3.15
3.66
( 5%
+20 C +68F ) 32,8
41,0
2.00
2.50
RV 350 - 050 - A - N
RV 350 - 063 - A - N
~0,285
~0,325
~0.63
~0.72
RV 350 - 075 - A 75 2.95 180 7.09 105 4.13 48,5 2.96 RV 350 - 075 - A - N ~0,361 ~0.79
RV 350 - 080 - A 80 3.15 190 7.48 110 4.33 51,6 3.15 RV 350 - 080 - A - N ~0,375 ~0.83
RV 350 - 100 - A 100 3.94 230 9.06 130 5.12 64,1 3.91 RV 350 - 100 - A - N ~0,437 ~0.96
RV 350 - 125 - A 125 4.92 280 11.02 155 6.10 79,8 4.87 RV 350 - 125 - A - N ~0,513 ~1.13
Info pg. 185
Special Springs 23
RV 500
B83180220000004 (Mercedes-Benz) Miniature height, maximum force -
E24.54.815.G (PSA-Renault) Mnima altura, mxima fuerza
VDI D003
970
3,6
.14
M6 870
M6 x 6 (2x)
Force (daN)
M6 x 6 (2x) 770
20 670
45
.79
25
M6
570
8
.9
Ra < 0,05 20
HV ~ 1000 470
.79
Cu
10 16 25 32 38 50 63 75 80 100 125
over stroke bushing 13 19
.08
Cu (mm)
2
(Cycles / min)
1.42 .04
33
3,5
.14
1.30
.24
6
4
.16
38 0,3
1.5 .01
Cu (mm)
Fixings
(10) RV500-050-A
(10) RV500-050-A-N
+ 1.0
+ 1.0
+ 0.5
+ 0.5 Body
Body + .04
+ .02
+ .04
+ .02 FC 38 A
Drop-ln FS2A 38 FCQ 38 A FSA 38
Technical specifications
RV 500 - 010 - A 10 0.39 50 1.97 40 1.57 9,5 0.58 RV 500 - 010 - A - N ~0,24 ~0.53
RV 500 - 013 - A 13 0.51 56 2.20 43 1.69 12,1 0.74 RV 500 - 013 - A - N ~0,25 ~0.55
RV 500 - 016 - A 16 0.63 62 2.44 46 1.81 14,7 0.90 RV 500 - 016 - A - N ~0,26 ~0.57
RV 500 - 019 - A 19 0.75 68 2.68 49 1.93 17,3 1.06 RV 500 - 019 - A - N ~0,28 ~0.62
RV 500 - 025 - A 25 0.98 80 3.15 55 2.17 470 22,4 1.37 RV 500 - 025 - A - N ~0,31 ~0.68
RV 500 - 032 - A 32 1.26 94 3.70 62 2.44 1058 28,5 1.74 RV 500 - 032 - A - N ~0,34 ~0.75
RV 500 - 038 - A 38 1.50 106 4.17 68 2.68 33,6 2.05 RV 500 - 038 - A - N ~0,37 ~0.81
RV 500 - 050 - A
RV 500 - 063 - A
50
63
1.97
2.48
130
156
5.11
6.14
80
93
3.15
3.66
( 5%
+20 C +68F
44,0
55,1
) 2.69
3.36
RV 500 - 050 - A - N
RV 500 - 063 - A - N
~0,42
~0,48
~0.92
~1.06
RV 500 - 075 - A 75 2.95 180 7.09 105 4.33 65,5 4.00 RV 500 - 075 - A - N ~0,54 ~1.19
RV 500 - 080 - A 80 3.15 190 7.48 110 4.33 69,8 4.26 RV 500 - 080 - A - N ~0,56 ~1.23
RV 500 - 100 - A 100 3.94 230 9.06 130 5.11 87,0 5.31 RV 500 - 100 - A - N ~0,66 ~1.45
RV 500 - 125 - A 125 4.92 280 11.02 155 6.10 108,5 6.62 RV 500 - 125 - A - N ~0,77 ~1.69
Info pg. 185
Special Springs 24
RV 750
Miniature height, maximum force - B83180220000004 (Mercedes-Benz)
Mnima altura, mxima fuerza E24.54.815.G (PSA-Renault)
VDI D003
1636
3,6
.14
1536
M6 1436
M8 x 6 (2x)
Force (daN)
1336
1236
25 1136
.98 1036
M8 936
Ra < 0,05 20
836
HV ~ 1000 .79
740
Cu
10 16 25 32 38 50 63 75 80 100 125
13 19
over stroke bushing
.08
2
Cu (mm) RV
(Cycles / min)
1.69 .04
40
3,5
.14
1.57
.24
6
.16
4
45 0,3
1.77 .01
Cu (mm)
Fixings
(10) RV750-050-A
(10) RV750-050-A-N
+ 1.0
+ 1.0 + 0.5
+ 0.5 Body
Body + .04
+ .02
Bottom mount FS2 45 + .04
+ .02 FC 45 A
Drop-ln FB 45 - FBA 45 FS2A 45 FCQ 45 A FSA 45
Technical specifications
RV 750 - 010 - A 10 0.39 52 2.05 42 1.65 16,5 1.01 RV 750 - 010 - A - N ~0,36 ~0.79
RV 750 - 013 - A 13 0.51 58 2.28 45 1.77 20,4 1.24 RV 750 - 013 - A - N ~0,38 ~0.84
RV 750 - 016 - A 16 0.63 64 2.52 48 1.89 24,2 1.48 RV 750 - 016 - A - N ~0,39 ~0.86
RV 750 - 019 - A 19 0.75 70 2.76 51 2.00 28,0 1.71 RV 750 - 019 - A - N ~0,41 ~0.90
RV 750 - 025 - A 25 0.98 82 3.23 57 2.24 740 35,6 2.17 RV 750 - 025 - A - N ~0,45 ~0.99
RV 750 - 032 - A 32 1.26 96 3.78 64 2.52 1665 44,5 2.72 RV 750 - 032 - A - N ~0,50 ~1.10
RV 750 - 038 - A 38 1.50 108 4.25 70 2.76 52,2 3.19 RV 750 - 038 - A - N ~0,54 ~1.19
RV 750 - 050 - A
RV 750 - 063 - A
50
63
1.97
2.48
132
158
5.20
6.22
82
95
3.23
3.74
( 5%
+20 C +68F ) 67,4
84,0
4.11
5.13
RV 750 - 050 - A - N
RV 750 - 063 - A - N
~0,61
~0,70
~1.34
~1.54
RV 750 - 075 - A 75 2.95 182 7.17 107 4.21 100,3 6.12 RV 750 - 075 - A - N ~0,77 ~1.69
RV 750 - 080 - A 80 3.15 192 7.56 112 4.41 106,6 6.51 RV 750 - 080 - A - N ~0,81 ~1.78
RV 750 - 100 - A 100 3.94 232 9.13 132 5.20 132,1 8.06 RV 750 - 100 - A - N ~0,93 ~2.05
RV 750 - 125 - A 125 4.92 282 11.10 157 6.18 163,9 10.00 RV 750 - 125 - A - N ~1,10 ~2.42
Info pg. 185
Special Springs 25
RV 1000
B83180220000004 (Mercedes-Benz) Miniature height, maximum force -
E24.54.815.G (PSA-Renault) Mnima altura, mxima fuerza
VDI D003
1923
.16
4
M6
1723
Force (daN)
M8 x 6 (2x)
1523
28
1323
1.10
M8
Ra < 0,05 20 1123
HV ~ 1000 .79
925
Cu
13 19 25 32 38 50 63 75 80 100 125
16
over stroke bushing
.12
Cu (mm)
3
(Cycles / min)
1.81 .08
43
.20
1.69
.24
5
6
8
.31
50 0,3
1.97 .01
Cu (mm)
Fixings
(10) RV1000-050-A
(10) RV1000-050-A-N
+ 1.0
+ 1.0 + 0.5
+ 0.5 Body
Body
+ .04
+ .02
Bottom mount FS2 50 + .04
+ .02 FC 50 A
Drop-ln FB 50 - FBA 50 FS2A 50 FCQ 50 A FSA 50
Technical specifications
RV 1000 - 013 - A 13 0.51 64 2.52 51 2.01 28,0 1.71 RV 1000 - 013 - A - N ~0,51 ~1.12
RV 1000 - 016 - A 16 0.63 70 2.76 54 2.13 32,7 2.00 RV 1000 - 016 - A - N ~0,54 ~1.19
RV 1000 - 019 - A 19 0.75 76 2.99 57 2.24 37,4 2.28 RV 1000 - 019 - A - N ~0,56 ~1.23
RV 1000 - 025 - A 25 0.98 88 3.46 63 2.48 46,8 2.86 RV 1000 - 025 - A - N ~0,61 ~1.34
RV 1000 - 032 - A 32 1.26 102 4.02 70 2.76 925 57,8 3.53 RV 1000 - 032 - A - N ~0,67 ~1.47
RV 1000 - 038 - A 38 1.50 114 4.49 76 2.99 2080 67,2 4.10 RV 1000 - 038 - A - N ~0,71 ~1.56
RV 1000 - 050 - A 50 1.97 138 5.43 88 3.46 83,6 5.10 RV 1000 - 050 - A - N ~0,81 ~1.78
RV 1000 - 063 - A
RV 1000 - 075 - A
63
75
2.48
2.95
164
188
6.46
7.40
101
113
3.98
4.45
( 5%
+20 C +68F ) 106,5
125,3
6.50
7.65
RV 1000 - 063 - A - N
RV 1000 - 075 - A - N
~0,91
~1,05
~2.00
~2.31
RV 1000 - 080 - A 80 3.15 198 7.80 118 4.65 133,2 8.13 RV 1000 - 080 - A - N ~1,09 ~2.40
RV 1000 - 100 - A 100 3.94 238 9.37 138 5.43 164,6 10.04 RV 1000 - 100 - A - N ~1,21 ~2.66
RV 1000 - 125 - A 125 4.92 288 11.34 163 6.42 203,9 12.44 RV 1000 - 125 - A - N ~1,41 ~3.10
Info pg. 185
Special Springs 26
RV 1500
Miniature height, maximum force - B83180220000004 (Mercedes-Benz)
Mnima altura, mxima fuerza E24.54.815.G (PSA-Renault)
VDI D003
3130
4,5
.18
2930
M6
2730
Force (daN)
M8 x 6 (2x) 2530
2330
36
1.42 2130
M8 1930
Ra < 0,05 20 1730
HV ~ 1000 .79
1530
Cu
13 19 25 32 38 50 63 75 80 100 125
16
over stroke bushing
.12
Cu (mm) RV
3
(Cycles / min)
2.32 .08
56
.20
2.20
5
.24
6
.31
63 0,3
8
2.48 .01
Cu (mm)
Fixings
(10) RV1500-050-A
(10) RV1500-050-A-N
+ 1.0
+ 1.0 + 0.5
Body
+ 0.5 Body
+ .04
+ .02
Bottom mount FS2 63 + .04
+ .02 FC 63 A
Drop-ln FB 50 - FBA 50 FS2A 63 FCQ 63 A
Technical specifications
RV 1500 - 013 - A 13 0.51 70 2.76 57 2.24 49,8 3.04 RV 1500 - 013 - A - N ~0,92 ~2.02
RV 1500 - 016 - A 16 0.63 76 2.99 60 2.36 57,8 3.53 RV 1500 - 016 - A - N ~0,96 ~2.11
RV 1500 - 019 - A 19 0.75 82 3.22 63 2.48 65,8 4.02 RV 1500 - 019 - A - N ~0,99 ~2.18
RV 1500 - 025 - A 25 0.98 94 3.70 69 2.72 81,7 4.99 RV 1500 - 025 - A - N ~1,06 ~2.33
1530
RV 1500 - 032 - A 32 1.26 108 4.25 76 2.99 100,2 6.11 RV 1500 - 032 - A - N ~1,14 ~2.51
RV 1500 - 038 - A 38 1.50 120 4.72 82 3.22 3442 116,2 7.09 RV 1500 - 038 - A - N ~1,21 ~2.66
RV 1500 - 050 - A
RV 1500 - 063 - A
50
63
1.97
2.48
144
170
5.67
6.69
94
107
3.70
4.21 ( 5%
+20 C +68F ) 148,0
182,5
9.03
11.14
RV 1500 - 050 - A - N
RV 1500 - 063 - A - N
~1,35
~1,51
~2.97
~3.32
RV 1500 - 075 - A 75 2.95 194 7.64 119 4.69 214,4 13.08 RV 1500 - 075 - A - N ~1,65 ~3.63
RV 1500 - 080 - A 80 3.15 204 8.03 124 4.88 227,7 13.90 RV 1500 - 080 - A - N ~1,71 ~3.76
RV 1500 - 100 - A 100 3.94 244 9.61 144 5.67 280,8 17.14 RV 1500 - 100 - A - N ~1,94 ~4.27
RV 1500 - 125 - A 125 4.92 294 11.57 169 6.65 347,1 21.18 RV 1500 - 125 - A - N ~2,23 ~4.91
Info pg. 185
Special Springs 27
RV 2400
B83180220000004 (Mercedes-Benz) Miniature height, maximum force -
E24.54.815.G (PSA-Renault) Mnima altura, mxima fuerza
VDI D003
4885
4,5
.18
M6
M8 x 6 (4x) 4385
Force (daN)
3885
45
1.77 3385
M8
40 2885
Ra < 0,05
HV ~ 1000 1.57
2385
Cu
16 25 32 38 50 63 75 80 100 125
19
over stroke bushing
.12
Cu (mm)
3
(Cycles x millions)
70
L min
(Cycles / min)
2.76 .10
67
.20
2.64
5
.24
6
.31
75 0,3
8
2.95 .01
Cu (mm)
Fixings
(10) RV2400-050-A
(10) RV2400-050-A-N
+ 1.0
+ 1.0 + 0.5
Body
+ 0.5 Body
+ .04
+ .02
Bottom mount FS2 75 + .04
+ .02 FC 75 A
Drop-ln FB 75 - FBA 75 FS2A 75 FCQ 75 A FSA 75
Technical specifications
RV 2400 - 016 - A 16 0.63 77 3.03 61 2.40 88,3 5.39 RV 2400 - 016 - A - N ~1,36 ~2.99
RV 2400 - 019 - A 19 0.75 83 3.27 64 2.52 100,4 6.13 RV 2400 - 019 - A - N ~1,40 ~3.08
RV 2400 - 025 - A 25 0.98 95 3.74 70 2.76 124,5 7.60 RV 2400 - 025 - A - N ~1,50 ~3.30
RV 2400 - 032 - A 32 1.26 109 4.29 77 3.03 2385 152,7 9.32 RV 2400 - 032 - A - N ~1,61 ~3.54
RV 2400 - 038 - A 38 1.50 121 4.76 83 3.27 176,8 10.79 RV 2400 - 038 - A - N ~1,70 ~3.74
5366
RV 2400 - 050 - A 50 1.97 145 5.71 95 3.74 225,1 13.74 RV 2400 - 050 - A - N ~1,89 ~4.16
RV 2400 - 063 - A
RV 2400 - 075 - A
63
75
2.48
2.95
171
195
6.73
7.68
108
120
4.25
4.72 ( 5%
+20 C +68F ) 277,5
325,8
16.93
19.88
RV 2400 - 063 - A - N
RV 2400 - 075 - A - N
~2,09
~2,28
~4.60
~5.02
RV 2400 - 080 - A 80 3.15 205 8.07 125 4.92 345,9 21.11 RV 2400 - 080 - A - N ~2,36 ~5.19
RV 2400 - 100 - A 100 3.94 245 9,65 145 5.71 426,4 26.02 RV 2400 - 100 - A - N ~2,67 ~5.87
RV 2400 - 125 - A 125 4.92 295 11.61 170 6.69 527,0 32.16 RV 2400 - 125 - A - N ~3,07 ~6.75
Info pg. 185
Special Springs 28
RV 4200
Miniature height, maximum force - B83180220000004 (Mercedes-Benz)
Mnima altura, mxima fuerza E24.54.815.G (PSA-Renault)
VDI D003
10240
5,5
.22
G1/8" 9240
M8 x 13 (4x)
Force (daN)
8240
7240
60
2.36 6240
M8
Ra < 0,05 60 5240
HV ~ 1000 2.36
4240
Cu
16 25 32 38 50 63 75 80 100 125
19
over stroke bushing
.12
RV
3
Cu (mm)
(Cycles / min)
3.54 .10
87
.20
10,5
3.42
5
.41
.31
95 0,3
8
3.74 .01
Cu (mm)
Fixings
(10) RV4200-050-A
(10) RV4200-050-A-N
+ 1.0
+ 1.0 + 0.5
+ 0.5 Body
Body
+ .04
+ .02
Bottom mount FS2 95 + .04
+ .02 FC 95 A
Drop-ln FB 95 - FBA 95 FS2A 95 FCQ 95 A FSA 95
Technical specifications
RV 4200 - 016 - A 16 0.63 90 0.14 74 2.91 164,7 10.05 RV 4200 - 016 - A - N ~2,76 ~6.07
RV 4200 - 019 - A 19 0.75 96 3.78 77 3.03 185,0 11.29 RV 4200 - 019 - A - N ~2,83 ~2.23
RV 4200 - 025 - A 25 0.98 108 4.25 83 3.27 225,6 13.77 RV 4200 - 025 - A - N ~2,98 ~6.56
RV 4200 - 032 - A 32 1.26 122 4.80 90 3.54 4240 272,9 16.65 RV 4200 - 032 - A - N ~3,16 ~6.95
RV 4200 - 038 - A 38 1.50 134 5.28 96 3.78 313,5 19.13 RV 4200 - 038 - A - N ~3,30 ~7.26
9540
RV 4200 - 050 - A 50 1.97 158 6.22 108 4.25 394,6 24.08 RV 4200 - 050 - A - N ~3,60 ~7.92
RV 4200 - 063 - A
RV 4200 - 075 - A
63
75
2.48
2.95
184
208
7.24
8.19
121
133
4.76
5.24 ( 5%
+20 C +68F ) 482,5
551,5
29.44
33.65
RV 4200 - 063 - A - N
RV 4200 - 075 - A - N
~3,93
~4,20
~8.65
~9.24
RV 4200 - 080 - A 80 3.15 218 8.58 138 5.43 597,5 36.46 RV 4200 - 080 - A - N ~4,35 ~9.57
RV 4200 - 100 - A 100 3.94 258 10.16 158 6.22 732,7 44.71 RV 4200 - 100 - A - N ~4,85 ~10.67
RV 4200 - 125 - A 125 4.92 308 12.12 183 7.20 901,7 55.03 RV 4200 - 125 - A - N ~5,47 ~12.03
Info pg. 185
Special Springs 29
RV 6600
B83180220000004 (Mercedes-Benz) Miniature height, maximum force -
E24.54.815.G (PSA-Renault) Mnima altura, mxima fuerza
VDI D003
14630
5,5
.22
13630
G1/8"
M10 x 13 (4x) 12630
Force (daN)
11630
10630
9630
75 8630
2.95 Ra < 0,05 80 7630
M8 HV ~ 1000 3.15
6630
16 25 32 38 50 63 75 80 100 125
19
Cu (mm)
Cu
(Cycles x millions)
.89
L 0,25
.01
(Cycles / min)
115 R 2,55
L min
4.53 1.00
112
.20
4.41
5
10,5
.31
120 0,3
8
.41
(10) RV6600-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 120 + .02 FC 120 A
Drop-ln FB 120 - FBA 120 FS2A 120 FCQ 120 A FSA 120
Technical specifications
RV 6600 - 016 - A 16 0.63 100 3.94 84 3.31 282,1 17.21 RV 6600 - 016 - A - N ~5,06 ~11.13
RV 6600 - 019 - A 19 0.75 106 4.17 87 3.43 314,2 19.17 RV 6600 - 019 - A - N ~5,17 ~11.37
RV 6600 - 025 - A 25 0.98 118 4.65 93 3.66 378,2 23.08 RV 6600 - 025 - A - N ~5,42 ~11.92
RV 6600 - 032 - A 32 1.26 132 5.20 100 3.94 6630 453,0 27.64 RV 6600 - 032 - A - N ~5,69 ~12.52
RV 6600 - 038 - A 38 1.50 144 5.67 106 4.17 517,1 31.56 RV 6600 - 038 - A - N ~5,93 ~13.05
14920
RV 6600 - 050 - A 50 1.97 168 6.61 118 4.65 645,3 39.38 RV 6600 - 050 - A - N ~6,40 ~14.08
RV 6600 - 063 - A
RV 6600 - 075 - A
63
75
2.48
2.95
194
218
7.64
8.58
131
143
5.16
5.63
( 5%
+20 C +68F ) 784,1
912,3
47.85
55.67
RV 6600 - 063 - A - N
RV 6600 - 075 - A - N
~6,90
~7,40
~15,18
~16.28
RV 6600 - 080 - A 80 3.15 228 8.98 148 5.83 965,7 58.93 RV 6600 - 080 - A - N ~7,60 ~16.72
RV 6600 - 100 - A 100 3.94 268 10.55 168 6.61 1179,4 71.97 RV 6600 - 100 - A - N ~8,40 ~18.48
RV 6600 - 125 - A 125 4.92 318 12.52 193 7.60 1446,4 88.27 RV 6600 - 125 - A - N ~9,40 ~20.68
Info pg. 185
Special Springs 30
RV 9500
Miniature height, maximum force - B83180220000004 (Mercedes-Benz)
Mnima altura, mxima fuerza E24.54.815.G (PSA-Renault)
VDI D003
19500
5,5
18500
.22
G1/8" 17500
M10 x 13 (4x)
16500
Force (daN)
15500
14500
13500
90
12500
3.54
11500
Ra < 0,05 100
10500
M8 HV ~ 1000 3.93
9540
19 25 32 38 50 63 75 80 100 125
Cu (mm) RV
Cu
(Cycles x millions)
.96
L 0,25
.01
(Cycles / min)
145 R 2,55
L min
5.71 1.00
142
.20
5.59
5
10,5
.31
150 0,3
8
.41
(10) RV9500-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 150 + .02 FC 150 A
Drop-ln FB 150 - FBA 150 FS2A 150 FCQ 150 A FSA 150
Technical specifications
RV 9500 - 019 - A 19 0.75 116 4.57 97 3.82 481,6 29.39 RV 9500 - 016 - A - N ~9,51 ~20.92
RV 9500 - 025 - A 25 0.98 128 5.04 103 4.05 578,4 35.30 RV 9500 - 019 - A - N ~9,90 ~21.78
RV 9500 - 032 - A 32 1.26 142 5.59 110 4.33 9540 691,2 42.18 RV 9500 - 025 - A - N ~10,30 ~22.66
RV 9500 - 038 - A 38 1.50 154 6.06 116 4.57 787,9 48.08 RV 9500 - 032 - A - N ~10,70 ~23.54
21465
RV 9500 - 050 - A 50 1.97 178 7.01 128 5.04 981,4 59.89 RV 9500 - 038 - A - N ~11,40 ~25.08
RV 9500 - 063 - A
RV 9500 - 075 - A
63
75
2.48
2.95
204
228
8.03
8.98
141
153
5.55
6.02 ( 5%
+20 C +68F ) 1190,9
1384,4
72.67
84.48
RV 9500 - 050 - A - N
RV 9500 - 063 - A - N
~12,20
~13,00
~26.84
~28.60
RV 9500 - 080 - A 80 3.15 238 9.37 158 6.22 1465,0 89.40 RV 9500 - 075 - A - N ~13,30 ~29.26
RV 9500 - 100 - A 100 3.94 278 10.94 178 7.00 1787,4 109.07 RV 9500 - 080 - A - N ~14,60 ~32.12
RV 9500 - 125 - A 125 4.92 328 12.91 203 7.99 2190,4 133.67 RV 9500 - 100 - A - N ~16,10 ~35.42
Info pg. 185
Special Springs 31
RF SERIES
Miniature height, maximum force, hose cylinders with G 1/8 charging port -
FIAT spec. Mnima altura, mxima fuerza, cilindros conectados con agujero G 1/8 Gas
Over
Over Stroke
Pressure Active
Active Safety
Safety
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
RF 750 45 1.77 10 - 125 0.39 - 4.92 740 1665 - -
RF 1000 50 1.97 13 - 125 0.51 - 4.92 925 2081 - -
RF 1500 63 2.48 13 - 125 0.51 - 4.92 1530 3439 - -
RF 2400 75 2.95 16 - 125 0.63 - 4.92 2385 5366 -
Special Springs 32
RF 750
Miniature height, maximum force, hose cylinders with G 1/8 charging port -
Mnima altura, mxima fuerza, cilindros conectados con agujero G 1/8 Gas
FIAT spec.
1636
.20
1536
5
G1/8
1436
Force (daN)
M8 x 13 (2x) 1336
1236
1136
1036
25 936
.98 Ra < 0,05 20
836
M8 HV ~ 1000 .79
740
10 16 25 32 38 50 63 75 80 100 125
13 19
Cu (mm)
Cu
RF
Minimum estimated life
14,5
(Cycles x millions)
.57
L 0,25
.01
(Cycles / min)
43 R 1,05
L min
1.69 .041
40
3,5
.14
1.57
10,5
.16
45 0,3
.41
(10) RF750-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 45 + .02 FC 45 A
Drop-ln FB 45 - FBA 45 FS2A 45 FCQ 45 A FSA 45
Technical specifications
RF 750 - 010 - A 10 0.39 62 2.44 52 2.05 16,5 1.01 RF 750 - 010 - A - N ~0,46 ~1.01
RF 750 - 013 - A 13 0.51 68 2.68 55 2.17 20,4 1.24 RF 750 - 013 - A - N ~0,48 ~1.06
RF 750 - 016 - A 16 0.63 74 2.91 58 2.28 24,2 1.48 RF 750 - 016 - A - N ~0,50 ~1.1
RF 750 - 019 - A 19 0.75 80 3.15 61 2.40 740 28,0 1.71 RF 750 - 019 - A - N ~0,52 ~1.14
RF 750 - 025 - A 25 0.98 92 3.62 67 2.64 35,6 2.17 RF 750 - 025 - A - N ~0,56 ~1.23
1665
RF 750 - 032 - A 32 1.26 106 4.17 74 2.91 44,5 2.72 RF 750 - 032 - A - N ~0,60 ~1.32
RF 750 - 038 - A
RF 750 - 050 - A
38
50
1.50
1.97
118
142
4.65
5.59
80
92
3.15
3.62 ( 5%
+20 C +68F ) 52,2
67,4
3.19
4.11
RF 750 - 038 - A - N
RF 750 - 050 - A - N
~0,64
~0,72
~1.41
~1.58
RF 750 - 063 - A 63 2.48 168 6.61 105 4.13 84,0 5.13 RF 750 - 063 - A - N ~0,80 ~1.76
RF 750 - 075 - A 75 2.95 192 7.56 117 4.60 100,3 6.12 RF 750 - 075 - A - N ~0,88 ~1.94
RF 750 - 080 - A 80 3.15 202 7.95 122 4.80 106,6 6.51 RF 750 - 080 - A - N ~0,91 ~2.00
RF 750 - 100 - A 100 3.94 242 9.53 142 5.59 132,1 8.06 RF 750 - 100 - A - N ~1,04 ~2.29
RF 750 - 125 - A 125 4.92 292 11.50 167 6.57 163,9 10.00 RF 750 - 125 - A - N ~1,20 ~2.64
Info pg. 185
Special Springs 33
RF 1000
Miniature height, maximum force, hose cylinders with G 1/8 charging port -
FIAT spec. Mnima altura, mxima fuerza, cilindros conectados con agujero G 1/8 Gas
1923
5,5
.22
G1/8
1723
Force (daN)
M8 x 13 (2x)
1523
1323
28
1123
1.10 Ra < 0,05 20
M8 HV ~ 1000 .79
925
13 19 25 32 38 50 63 75 80 100 125
16
Cu (mm)
Cu
(Cycles x millions)
.57
L 0,25
.01
(Cycles / min)
46 R 2,05
L min
1.81 .08
43
.20
1.69
5
10,5
50 0,3
.31
.41
1.97 .01
Cu (mm)
Fixings
(10) RF1000-050-A
(10) RF1000-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 50 + .02 FC 50 A
Drop-ln FB 50 - FBA 50 FS2A 50 FCQ 50 A FSA 50
Technical specifications
RF 1000 - 013 - A 13 0.51 74 2.91 61 2.4 28,0 1.71 RF 1000 - 013 - A - N ~0,64 ~1.41
RF 1000 - 016 - A 16 0.63 80 3.15 64 2.52 32,7 2.00 RF 1000 - 016 - A - N ~0,67 ~1.47
RF 1000 - 019 - A 19 0.75 86 3.39 67 2.64 37,4 2.28 RF 1000 - 019 - A - N ~0,70 ~1.54
RF 1000 - 025 - A 25 0.98 98 3.86 73 2.87 925 46,8 2.86 RF 1000 - 025 - A - N ~0,74 ~1.63
RF 1000 - 032 - A 32 1.26 112 4.41 80 3.15 57,8 3.53 RF 1000 - 032 - A - N ~0,79 ~1.74
2080
RF 1000 - 038 - A 38 1.50 124 4.88 86 3.39 67,2 4.10 RF 1000 - 038 - A - N ~0,84 ~1.85
RF 1000 - 050 - A
RF 1000 - 063 - A
50
63
1.97
2.48
148
174
5.83
6.85
98
111
3.86
4.37 ( 5%
+20 C +68F ) 83,6
106,5
5.10
6.50
RF 1000 - 050 - A - N
RF 1000 - 063 - A - N
~0,94
~1,04
~2.07
~2.29
RF 1000 - 075 - A 75 2.95 198 7.80 123 4.84 125,3 7.65 RF 1000 - 075 - A - N ~1,14 ~2.51
RF 1000 - 080 - A 80 3.15 208 8.19 128 5.04 133,2 8.13 RF 1000 - 080 - A - N ~1,18 ~2.60
RF 1000 - 100 - A 100 3.94 248 9.76 148 5.83 164,6 10.04 RF 1000 - 100 - A - N ~1,34 ~2.95
RF 1000 - 125 - A 125 4.92 298 11.73 173 6.81 203,9 12.44 RF 1000 - 125 - A - N ~1,54 ~3.39
Info pg. 185
Special Springs 34
RF 1500
Miniature height, maximum force, hose cylinders with G 1/8 charging port -
Mnima altura, mxima fuerza, cilindros conectados con agujero G 1/8 Gas
FIAT spec.
3130
5,5
.22
2930
G1/8
2730
Force (daN)
M8 x 13 (2x) 2530
2330
2130
36 1930
1.42 20
Ra < 0,05 1730
M8 HV ~ 1000 .79
1530
13 19 25 32 38 50 63 75 80 100 125
16
Cu (mm)
Cu
RF
Minimum estimated life
(Cycles x millions)
.63
16
L 0,25
.01
(Cycles / min)
59 R 2,05
L min
2.32 .08
56
.20
2.20
5
63 0,3
10,5
.31
.41
2.48 .01
Cu (mm)
Fixings
(10) RF1500-050-A
(10) RF1500-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 63 + .02 FC 63 A
Drop-ln FB 50 - FBA 50 FS2A 63 FCQ 63 A
Technical specifications
RF 1500 - 013 - A 13 0.51 80 3.15 67 2.64 49,8 3.04 RF 1500 - 013 - A - N ~1,15 ~2.53
RF 1500 - 016 - A 16 0.63 86 3.38 70 2.76 57,8 3.53 RF 1500 - 016 - A - N ~1,18 ~2.60
RF 1500 - 019 - A 19 0.75 92 3.62 73 2.87 65,8 4.02 RF 1500 - 019 - A - N ~1,22 ~2.68
RF 1500 - 025 - A 25 0.98 104 4.09 79 3.11 1530 81,7 4.99 RF 1500 - 025 - A - N ~1,29 ~2.84
RF 1500 - 032 - A 32 1.26 118 4.64 86 3.39 100,2 6.11 RF 1500 - 032 - A - N ~1,37 ~3.01
3442
RF 1500 - 038 - A 38 1.50 130 5.12 92 3.62 116,2 7.09 RF 1500 - 038 - A - N ~1,44 ~3.17
RF 1500 - 050 - A
RF 1500 - 063 - A
50
63
1.97
2.48
154
180
6.06
7.09
104
117
4.09
4.61 ( 5%
+20 C +68F ) 148,0
182,5
9.03
11.14
RF 1500 - 050 - A - N
RF 1500 - 063 - A - N
~1,58
~1,73
~3.48
~3.81
RF 1500 - 075 - A 75 2.95 204 8.03 129 5.08 214,4 13.08 RF 1500 - 075 - A - N ~1,87 ~4.11
RF 1500 - 080 - A 80 3.15 214 8.43 134 5.28 227,7 13.90 RF 1500 - 080 - A - N ~1,93 ~4.25
RF 1500 - 100 - A 100 3.94 254 10 154 6.06 280,8 17.14 RF 1500 - 100 - A - N ~2,17 ~4.77
RF 1500 - 125 - A 125 4.92 304 11.97 179 7.05 347,1 21.18 RF 1500 - 125 - A - N ~2,46 ~5.41
Info pg. 185
Special Springs 35
RF 2400
Miniature height, maximum force, hose cylinders with G 1/8 charging port -
FIAT spec. Mnima altura, mxima fuerza, cilindros conectados con agujero G 1/8 Gas
4885
5,5
.22
G1/8"
M8 x 13 (4x) 4385
Force (daN)
3885
3385
45
40 2885
1.77 Ra < 0,05
M8 HV ~ 1000 1.57
2385
16 25 32 38 50 63 75 80 100 125
19
Cu (mm)
Cu
(Cycles / min)
70 R 2,55
L min
2.76 1.00
67
.20
2.64
5
10,5
.31
75 0,3
.41
(10) RF2400-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 75 + .02 FC 75 A
Drop-ln FB 75 - FBA 75 FS2A 75 FCQ 75 A FSA 75
Technical specifications
RF 2400 - 016 - A 16 0.63 87 3.43 71 2.80 88,3 5.39 RF 2400 - 016 - A - N ~1,68 ~3.70
RF 2400 - 019 - A 19 0.75 93 3.66 74 2.91 100,4 6.13 RF 2400 - 019 - A - N ~1,73 ~3.81
RF 2400 - 025 - A 25 0.98 105 4.13 80 3.15 124,5 7.60 RF 2400 - 025 - A - N ~1,82 ~4.00
RF 2400 - 032 - A 32 1.26 119 4.69 87 3.43 2385 152,7 9.32 RF 2400 - 032 - A - N ~1,93 ~4.25
RF 2400 - 038 - A 38 1.50 131 5.16 93 3.66 176,8 10.79 RF 2400 - 038 - A - N ~2,03 ~4.47
5366
RF 2400 - 050 - A 50 1.97 155 6.10 105 4.13 225,1 13.74 RF 2400 - 050 - A - N ~2,21 ~4.86
RF 2400 - 063 - A
RF 2400 - 075 - A
63
75
2.48
2.95
181
205
7.13
8.07
118
130
4.65
5.12 ( 5%
+20 C +68F ) 277,5
325,8
16.93
19.88
RF 2400 - 063 - A - N
RF 2400 - 075 - A - N
~2,42
~2,61
~5.32
~5.74
RF 2400 - 080 - A 80 3.15 215 8.46 135 5.31 345,9 21.11 RF 2400 - 080 - A - N ~2,69 ~5.92
RF 2400 - 100 - A 100 3.94 255 10.04 155 6.10 426,4 26.02 RF 2400 - 100 - A - N ~3,00 ~6.61
RF 2400 - 125 - A 125 4.92 305 12.00 180 7.09 527,0 32.16 RF 2400 - 125 - A - N ~3,40 ~7.48
Info pg. 185
Special Springs 36
RF
Special Springs 37
HR SERIES
Miniature height, maximum force -
Mnima altura, mxima fuerza
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
HR 200 25 0.98 5 - 32 0.20 - 1.26 200 450 - - -
HR 300 32 1.26 5 - 125 0.20 - 4.92 300 675 - - -
HR 500 38 1.50 5 - 125 0.20 - 4.92 470 1058 - - -
HRF 500 M 38 X 1,5 - 5 - 125 0.20 - 4.92 470 1058 - - -
HR 700 45 1.77 10 - 125 0.39 - 4.92 680 1530 - - -
HR 700 N 45 1.77 10 - 125 0.39 - 4.92 680 1530 - - -
HRF 700 M 45 X 1,5 - 10 - 125 0.39 - 4.92 680 1530 - - -
HR 1000 50 1.97 10 - 125 0.39 - 4.92 1060 2385 - - -
HR 1000 N 50 1.97 10 - 125 0.39 - 4.92 1060 2385 - - -
HRF 1000 M 50 X 1,5 - 10 - 125 0.39 - 4.92 1060 2385 - - -
HR 1500 63 2.48 10 - 125 0.39 - 4.92 1530 3442 - - -
HR 1500 N 63 2.48 10 - 125 0.39 - 4.92 1530 3442 - - -
HR 2400 75 2.95 10 - 125 0.39 - 4.92 2385 5366 - - -
HR 2400 N 75 2.95 10 - 125 0.39 - 4.92 2385 5366 - - -
HR 4200 95 3.74 16 - 125 0.63 - 4.92 4240 9540 - - -
HR 4200 N 95 3.74 16 - 125 0.63 - 4.92 4240 9540 - - -
HR 6600 120 4.72 16 - 125 0.63 - 4.92 6630 14920 - - -
HR 11800 150 5.90 19 - 125 0.75 - 4.92 11780 26505 - - -
Special Springs 38
HR 200
Miniature height, maximum force -
Mnima altura, mxima fuerza
M6 x 4
Force (daN)
12
.47 Ra < 0,05
HV ~ 1000
Cu
Cu (mm)
.04
.31
8
(Cycles x millions)
.01
HR
(Cycles / min)
23 R1 HRF
L min
.90 .04
25 0,3 M6
.98 .01 Cu (mm)
Fixings
(10) HR200-032-A
+ 1,0
+ 1,0 Body + 0,5
+ .04
Body + 0,5 + .02
+ .04
+ .02 Drop-ln Bottom mount FC 25 A
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
( )
HR 200 - 016 - A 16 0.63 62 2.44 46 1.81 - - - ~0,11 ~0.24
5%
HR 200 - 019 - A 19 0.75 68 2.68 49 1.93 - - - ~0,12 ~0.24
+20 C +68F
HR 200 - 025 - A 25 0.98 80 3.15 55 2.17 - - - ~0,13 ~0.29
HR 200 - 032 - A 32 1.26 94 3.70 62 2.44 - - - ~0,16 ~0.36
Special Springs 39
HR 300
Miniature height, maximum force -
Mnima altura, mxima fuerza
M8 x 4
Force (daN)
16
.63
M6
Ra < 0,05
HV ~ 1000
Cu
.01
1
Cu (mm)
10,5
0,25
30 R1
(Cycles x millions)
L min
(Cycles / min)
1.18 .04
27
3,5
.14
1.06
32 0,3
.16
32 0,3
4
( Cu 19 - 125 ) ( Cu 5 - 16 ) Cu (mm)
Fixings
(10) HR300-050-A
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .02
FS2 32 + .04
+ .02
Drop-ln Bottom mount FS2A 32 FC 32 A FSA 32
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
( )
HR 300 - 038 - A 38 1.50 106 4.17 68 2.68 5% - - - ~0,29 ~0.64
HR 300 - 050 - A 50 1.97 130 5.12 80 3.15 +20 C +68F - - - ~0,34 ~0.75
HR 300 - 063 - A 63 2.48 156 6.14 93 3.66 - - - ~0,39 ~0.86
HR 300 - 075 - A 75 2.95 180 7.08 105 4.13 - - - ~0,42 ~0.94
HR 300 - 080 - A 80 3.15 190 7.48 110 4.33 - - - ~0,45 ~0.99
HR 300 - 100 - A 100 3.94 230 9.06 130 5.12 - - - ~0,53 ~1.17
HR 300 - 125 - A 125 4.92 280 11.0 155 6.10 - - - ~0,68 ~1.52
Special Springs 40
HR 500
Miniature height, maximum force -
Mnima altura, mxima fuerza
M8 x 4
Force (daN)
20
.79
M6
Ra < 0,05
HV ~ 1000
Cu
.04
1
Cu (mm)
10,5
HR
(Cycles / min)
1.42 .04
33
HRF
3,5
.14
1.30
38 0,3
.16
38 0,3
4
( Cu 19 - 125 ) ( Cu 5 - 16 ) Cu (mm)
Fixings
(10) HR500-050-A
+ 1,0
+ 1,0 Body + 0,5
+ .04
Body + 0,5
+ .04
+ .02
FS2 38 + .02
FC 38 A
Drop-ln Bottom mount FS2A 38 FCQ 38 A FSA 38
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
( )
HR 500 - 038 - A 38 1.50 106 4.17 68 2.68 5% - - - ~0,44 ~0.97
HR 500 - 050 - A 50 1.97 130 5.12 80 3.15 +20 C +68F - - - ~0,50 ~1.10
HR 500 - 063 - A 63 2.48 156 6.14 93 3.66 - - - ~0,57 ~1.26
HR 500 - 075 - A 75 2.95 180 7.08 105 4.13 - - - ~0,61 ~1.36
HR 500 - 080 - A 80 3.15 190 7.48 110 4.33 - - - ~0,66 ~1.46
HR 500 - 100 - A 100 3.94 230 9.06 130 5.12 - - - ~0,77 ~1.70
HR 500 - 125 - A 125 4.92 280 11.02 155 6.10 - - - ~0,90 ~2.01
Special Springs 41
HRF 500
threaded
Miniature height, maximum force -
Mnima altura, mxima fuerza
Force (daN)
20
.79
M6
Ra < 0,05 4,1
HV ~ 1000 .16
Cu
.04
2,8
.11
.2
5
Cu (mm)
L 0,25
(Cycles / min)
.31
8
35,7
2,8
.11
1.40
M 38 x 1,5
M 38 x 1,5 Cu (mm)
Fixings
(10) HRF500-050-A
+ 1,0
Body + 0,5
+ .04
+ .02
FCA 38 GM 38
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
( )
HRF 500 - 038 - A 38 1.50 106 4.17 68 2.68 5% - - - ~0,40 ~0.97
HRF 500 - 050 - A 50 1.97 130 5.12 80 3.15 +20 C +68F - - - ~0,47 ~1.10
HRF 500 - 063 - A 63 2.48 156 6.14 93 3.66 - - - ~0,54 ~1.26
HRF 500 - 075 - A 75 2.95 180 7.08 105 4.13 - - - ~0,59 ~1.36
HRF 500 - 080 - A 80 3.15 190 7.48 110 4.33 - - - ~0,63 ~1.46
HRF 500 - 100 - A 100 3.94 230 9.06 130 5.12 - - - ~0,75 ~1.70
HRF 500 - 125 - A 125 4.92 280 11.02 155 6.10 - - - ~0,88 ~2.01
Special Springs 42
HR 700
Miniature height, maximum force -
Mnima altura, mxima fuerza
Force (daN)
M8 x 4 (2x)
24
.95 Ra < 0,05
M6 HV ~ 1000 20
.79
Cu
Cu (mm)
.04
(Cycles x millions)
.01
HR
(Cycles / min)
43 R1 HRF
L min
1.69 .04
40
3,5
.14
1.57
45 0,3
.16
4
(10) HR700-050-A
+ 1,0
+ 1,0
Body + 0,5
Body + 0,5 + .04
+ .04
+ .02
Bottom mount FS2 45 + .02 FC 45 A
Drop-ln FB 45 - FBA 45 FS2A 45 FCQ 45 A FSA 45
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
Special Springs 43
HR 700N
linkable G1/8"
FIAT spec. Miniature height, maximum force -
Mnima altura, mxima fuerza
4,7
.19
G1/8"
Force (daN)
M8 x 8 (2x)
24
.95 Ra < 0,05
20
HV ~ 1000
.79
Cu
Cu (mm)
.04
.57
(Cycles x millions)
.01
(Cycles / min)
L
43 R1
L min
1.69 .04
40
1.57
3,5
.14
10,5
45 0,3
.16
.41
(10) HR700-050-A-N
+ 1,0
+ 1,0
Body + 0,5
Body + 0,5 + .04
+ .04
+ .02
Bottom mount FS2 45 + .02 FC 45 A
Drop-ln FB 45 - FBA 45 FS2A 45 FCQ 45 A FSA 45
Technical specifications
HR 700 - 010 - A - N 10 0.39 62 2.44 52 2.05 13 0.79 HR 700 - 010 - A - N ~0,48 ~1.06
HR 700 - 013 - A - N 13 0.51 68 2.68 55 2.17 17 1.04 HR 700 - 013 - A - N ~0,52 ~1.14
HR 700 - 016 - A - N 16 0.63 74 2.91 58 2.28 20 1.22 HR 700 - 016 - A - N ~0,55 ~1.21
HR 700 - 019 - A - N 19 0.75 80 3.15 61 2.40 21 1.28 HR 700 - 019 - A - N ~0,58 ~1.28
HR 700 - 025 - A - N 25 0.98 92 3.62 67 2.64 28 1.71 HR 700 - 025 - A - N ~0,64 ~1.41
680 36
HR 700 - 032 - A - N 32 1.26 106 4.17 74 2.91 2.20 HR 700 - 032 - A - N ~0,68 ~1.50
HR 700 - 038 - A - N 38 1.50 118 4.65 80 3.15 1530 44 2.69 HR 700 - 038 - A - N ~0,72 ~1.58
( )
HR 700 - 050 - A - N 50 1.97 142 5.59 92 3.62 5% 58 3.54 HR 700 - 050 - A - N ~0,85 ~1.87
HR 700 - 063 - A - N 63 2.48 168 6.61 105 4.13 +20 C +68F 73 4.45 HR 700 - 063 - A - N ~0,94 ~2.07
HR 700 - 075 - A - N 75 2.95 192 7.56 117 4.61 86 5.25 HR 700 - 075 - A - N ~0,98 ~2.16
HR 700 - 080 - A - N 80 3.15 202 7.95 122 4.80 93 5.68 HR 700 - 080 - A - N ~1,03 ~2.27
HR 700 - 100 - A - N 100 3.94 242 9.53 142 5.59 116 7.08 HR 700 - 100 - A - N ~1,16 ~2.55
HR 700 - 125 - A - N 125 4.92 292 11.50 167 6.57 145 8.85 HR 700 - 125 - A - N ~1,35 ~2.97
Info pg. 185
Special Springs 44
HRF 700
threaded
Miniature height, maximum force -
Mnima altura, mxima fuerza
Force (daN)
24
.95
M6
Ra < 0,05
HV ~ 1000 4,1
.16
Cu
.04
2,8
.11
.2
Cu (mm)
5
L 0,25
(Cycles / min)
HRF
.31
8
42,7
2,8
.11
1.68
M 45 x 1,5
M 45 x 1,5 Cu (mm)
Fixings
(10) HRF700-050-A
+ 1,0
Body + 0,5
+ .04
+ .02
FCA 45 GM 45
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
Special Springs 45
HR 1000
Miniature height, maximum force -
Mnima altura, mxima fuerza
.12
3
M6
Force (daN)
M8 x 5 (2x)
30
1.18
M8 Ra < 0,05 20
HV ~ 1000 .79
Cu
Cu (mm)
.04
(Cycles x millions)
.01
(Cycles / min)
46 R2
L min
1.81 .08
46 R2
1.81
.08
50 0,3
.28
7
(10) HR1000-050-A-NA
+ 1,0
+ 1,0
Body + 0,5
Body + 0,5 + .04
+ .04
+ .02
Bottom mount + .02 FC 50 A
Drop-ln FB 50 - FBA 50 FCQ 50 A FSA 50 FHR01000
Technical specifications
HR 1000 - 010 - A 10 0.39 58 2.28 48 1.89 25 1.53 HR 1000 - 010 - A - NA ~0,57 ~1.26
HR 1000 - 013 - A 13 0.51 64 2.52 51 2.01 30 1.83 HR 1000 - 013 - A - NA ~0,59 ~1.30
HR 1000 - 016 - A 16 0.63 70 2.76 54 2.13 35 2.14 HR 1000 - 016 - A - NA ~0,62 ~1.38
HR 1000 - 019 - A 19 0.75 76 2.99 57 2.24 40 2.44 HR 1000 - 019 - A - NA ~0,65 ~1.43
HR 1000 - 025 - A 25 0.98 88 3.46 63 2.48 49 2.99 HR 1000 - 025 - A - NA ~0,70 ~1.54
1060
HR 1000 - 032 - A 32 1.26 102 4.02 70 2.75 60 3.66 HR 1000 - 032 - A - NA ~0,77 ~1.72
HR 1000 - 038 - A 38 1.50 114 4.49 76 2.99 2385 70 4.27 HR 1000 - 038 - A - NA ~0,83 ~1.83
HR 1000 - 050 - A
HR 1000 - 063 - A
50
63
1.97
2.48
138
164
5.43
6.46
88
101
3.46
3.98 ( 5%
+20 C +68F ) 88
109
5.37
6.65
HR 1000 - 050 - A - NA ~0,94 ~2.08
HR 1000 - 063 - A - NA ~1,07 ~2.36
HR 1000 - 075 - A 75 2.95 188 7.40 113 4.45 128 7.81 HR 1000 - 075 - A - NA ~1,16 ~2.59
HR 1000 - 080 - A 80 3.15 198 7.80 118 4.65 136 8.30 HR 1000 - 080 - A - NA ~1,21 ~2.67
HR 1000 - 100 - A 100 3.94 238 9.37 138 5.43 167 10.19 HR 1000 - 100 - A - NA ~1,43 ~3.16
HR 1000 - 125 - A 125 4.92 288 11.34 163 6.42 206 12.57 HR 1000 - 125 - A - NA ~1,70 ~3.75
Info pg. 185
Special Springs 46
HR 1000N
linkable G1/8"
Miniature height, maximum force - FIAT spec.
Mnima altura, mxima fuerza
5,5
.22
G1/8
Force (daN)
M8 x 10 (2x)
30
1.18 Ra < 0,05 20
M8 HV ~ 1000 .79
Cu (mm)
Cu
(Cycles x millions)
L 0,25
.57
.01
HR
(Cycles / min)
46 R2 HRF
L min
1.81 .08
43
1.69
.2
5
10,5
50 0,3
.31
.41
(10) HR1000-050-A-N
+ 1,0
+ 1,0 Body + 0,5
Body + 0,5 + .04
+ .04
+ .02
Bottom mount FS2 50 + .02
FC 50 A
Drop-ln FB 50 - FBA 50 FS2A 50 FCQ 50 A FSA 50
Technical specifications
HR 1000 - 010 - A - N 10 0.39 68 2.68 58 2.28 25 1.53 HR 1000 - 010 - A - N ~0,57 ~1.25
HR 1000 - 013 - A - N 13 0.51 74 2.91 61 2.40 30 1.83 HR 1000 - 013 - A - N ~0,59 ~1.30
HR 1000 - 016 - A - N 16 0.63 80 3.15 64 2.52 35 2.14 HR 1000 - 016 - A - N ~0,62 ~1.36
HR 1000 - 019 - A - N 19 0.75 86 3.39 67 2.64 40 2.44 HR 1000 - 019 - A - N ~0,65 ~1.43
HR 1000 - 025 - A - N 25 0.98 98 3.86 73 2.87 49 2.99 HR 1000 - 025 - A - N ~0,70 ~1.54
1060
HR 1000 - 032 - A - N 32 1.26 112 4.41 80 3.15 60 3.66 HR 1000 - 032 - A - N ~0,77 ~1.69
HR 1000 - 038 - A - N 38 1.50 124 4.88 86 3.39 2385 70 4.27 HR 1000 - 038 - A - N ~0,83 ~1.83
HR 1000 - 050 - A - N
HR 1000 - 063 - A - N
50
63
1.97
2.48
148
174
5.83
6.85
98
111
3.86
4.37 ( 5%
+20 C +68F ) 88
109
5.37
6.65
HR 1000 - 050 - A - N
HR 1000 - 063 - A - N
~0,94
~1,07
~2.07
~2.35
HR 1000 - 075 - A - N 75 2.95 198 7.80 123 4.84 128 7.81 HR 1000 - 075 - A - N ~1,16 ~2.55
HR 1000 - 080 - A - N 80 3.15 208 8.19 128 5.04 136 8.30 HR 1000 - 080 - A - N ~1,21 ~2.66
HR 1000 - 100 - A - N 100 3.94 248 9.76 148 5.83 167 10.19 HR 1000 - 100 - A - N ~1,43 ~3.15
HR 1000 - 125 - A - N 125 4.92 298 11.73 173 6.81 206 12.57 HR 1000 - 125 - A - N ~1,70 ~3.74
Info pg. 185
Special Springs 47
HRF 1000
threaded
Miniature height, maximum force -
Mnima altura, mxima fuerza
3
.12
Force (daN)
M6
30
1.18
M8
4,1
Ra < 0,05 .16
HV ~ 1000
Cu
2,8
.11
.04
Cu (mm)
1
.2
5
(Cycles / min)
L min
5,5
.22
.31
8
47,7
1,5
.06
1.88
M 50 x 1,5
M 50 x 1,5 Cu (mm)
Fixings
(10) HRF1000-050-A
+ .04
+ .02
FCA 50 GM 50
Technical specifications
HRF 1000 - 010 - A 10 0.39 58 2.28 48 1.89 25 1.53 HRF 1000 - 010 - A - NA ~0,53 ~1.17
HRF 1000 - 013 - A 13 0.51 64 2.52 51 2.01 30 1.83 HRF 1000 - 013 - A - NA ~0,55 ~1.21
HRF 1000 - 016 - A 16 0.63 70 2.76 54 2.13 35 2.14 HRF 1000 - 016 - A - NA ~0,57 ~1.25
HRF 1000 - 019 - A 19 0.75 76 2.99 57 2.24 40 2.44 HRF 1000 - 019 - A - NA ~0,60 ~1.32
HRF 1000 - 025 - A 25 0.98 88 3.46 63 2.48 49 2.99 HRF 1000 - 025 - A - NA ~0,66 ~1.45
1060
HRF 1000 - 032 - A 32 1.26 102 4.02 70 2.75 60 3.66 HRF 1000 - 032 - A - NA ~0,73 ~1.61
HRF 1000 - 038 - A 38 1.50 114 4.49 76 2.99 2385 70 4.27 HRF 1000 - 038 - A - NA ~0,79 ~1.74
HRF 1000 - 050 - A
HRF 1000 - 063 - A
50
63
1.97
2.48
138
164
5.43
6.46
88
101
3.46
3.98 ( 5%
+20 C +68F ) 88
109
5.37
6.65
HRF 1000 - 050 - A - NA
HRF 1000 - 063 - A - NA
~0,90
~1,03
~1.98
~2.27
HRF 1000 - 075 - A 75 2.95 188 7.40 113 4.45 128 7.81 HRF 1000 - 075 - A - NA ~1,13 ~2.49
HRF 1000 - 080 - A 80 3.15 198 7.80 118 4.65 136 8.30 HRF 1000 - 080 - A - NA ~1,18 ~2.60
HRF 1000 - 100 - A 100 3.94 238 9.37 138 5.43 167 10.19 HRF 1000 - 100 - A - NA ~1,39 ~3.06
HRF 1000 - 125 - A 125 4.92 288 11.34 163 6.42 206 12.57 HRF 1000 - 125 - A - NA ~1,66 ~3.65
Info pg. 185
Special Springs 48
HR 1500
Miniature height, maximum force -
Mnima altura, mxima fuerza
3330
.16
3130
4
M6
2930
Force (daN)
M8 x 5 (2x) 2730
2530
36 2330
1.42 2130
M8 1930
Ra < 0,05 20
1730
HV ~ 1000 .79
1530
Cu
.04
Cu (mm)
1
HR
(Cycles / min)
2.32 .08
56 HRF
.2
5
2.20
5,5
.22
.31
63 0,3 63 0,3
8
( Cu 13 - 125 ) ( Cu 10 ) Cu (mm)
Fixings
(10) HR1500-050-A
+ 1,0
Technical specifications
HR 1500 - 010 - A 10 0.39 64 2.52 54 2.13 32 1.95 HR 1500 - 010 - A - NA ~1,02 ~2.25
HR 1500 - 013 - A 13 0.51 70 2.76 57 2.24 39 2.38 HR 1500 - 013 - A - NA ~1,05 ~2.34
HR 1500 - 016 - A 16 0.63 76 2.99 60 2.36 47 2.87 HR 1500 - 016 - A - NA ~1,10 ~2.45
HR 1500 - 019 - A 19 0.75 82 3.23 63 2.48 54 3.30 HR 1500 - 019 - A - NA ~1,15 ~2.56
HR 1500 - 025 - A 25 0.98 94 3.70 69 2.72 68 4.15 HR 1500 - 025 - A - NA ~1,25 ~2.76
1530
HR 1500 - 032 - A 32 1.26 108 4.25 76 2.99 85 5.19 HR 1500 - 032 - A - NA ~1,35 ~3.01
HR 1500 - 038 - A 38 1.50 120 4.72 82 3.23 3442 99 6.04 HR 1500 - 038 - A - NA ~1,44 ~3.18
HR 1500 - 050 - A
HR 1500 - 063 - A
50
63
1.97
2.48
144
170
5.67
6.69
94
107
3.70
4.21 ( 5%
+20 C +68F ) 128
158
7.81
9.64
HR 1500 - 050 - A - NA
HR 1500 - 063 - A - NA
~1,61
~1,81
~3.55
~4.00
HR 1500 - 075 - A 75 2.95 194 7.64 119 4.68 187 11.41 HR 1500 - 075 - A - NA ~1,90 ~4.24
HR 1500 - 080 - A 80 3.15 204 8.03 124 4.88 199 12.14 HR 1500 - 080 - A - NA ~2,06 ~4.55
HR 1500 - 100 - A 100 3.94 244 9.61 144 5.67 246 15.01 HR 1500 - 100 - A - NA ~2,38 ~5.25
HR 1500 - 125 - A 125 4.92 294 11.5 169 6.65 306 18.67 HR 1500 - 125 - A - NA ~2,86 ~6.31
Info pg. 185
Special Springs 49
HR 1500N
linkable G1/8"
FIAT spec. Miniature height, maximum force -
Mnima altura, mxima fuerza
3330
5,5
.22
3130
G1/8"
2930
Force (daN)
M8 x 12 (2x) 2730
2530
2330
2130
36 1930
1.42 Ra < 0,05 20
1730
M8 HV ~ 1000 .79
1530
Cu (mm)
Cu
(Cycles / min)
59 R2
L min
2.32 .08
56
2.20
.2
5
10,5
.31
63 0,3
.41
63 .01 Cu (mm)
Fixings
(10) HR1500-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 63 + .02 FC 63 A
Drop-ln FB 50 - FBA 50 FS2A 63 FCQ 63 A
Max. Speed F C P max P min S X
Maintenance kit
32 0 150 bar 20 bar 10,18 cm2
1,8 m/s - - N2 Y
Z
39BMHR01500A
176 80 2175 psi 290 psi 1.578 in.2
Technical specifications
HR 1500 - 010 - A - N 10 0.39 74 2.91 64 2.51 32 1.95 HR 1500 - 010 - A - N ~1,02 ~2.25
HR 1500 - 013 - A - N 13 0.51 80 3.15 67 2.64 39 2.38 HR 1500 - 013 - A - N ~1,05 ~2.34
HR 1500 - 016 - A - N 16 0.63 86 3.39 70 2.76 47 2.87 HR 1500 - 016 - A - N ~1,10 ~2.45
HR 1500 - 019 - A - N 19 0.75 92 3.62 73 2.87 54 3.30 HR 1500 - 019 - A - N ~1,15 ~2.56
HR 1500 - 025 - A - N 25 0.98 104 4.09 79 3.11 68 4.15 HR 1500 - 025 - A - N ~1,25 ~2.76
1530
HR 1500 - 032 - A - N 32 1.26 118 4.65 86 3.39 85 5.19 HR 1500 - 032 - A - N ~1,35 ~3.01
HR 1500 - 038 - A - N 38 1.50 130 5.12 92 3.62 3442 99 6.04 HR 1500 - 038 - A - N ~1,44 ~3.18
HR 1500 - 050 - A - N
HR 1500 - 063 - A - N
50
63
1.97
2.48
154
180
6.06
7.09
104
117
4.09
4.61 ( 5%
+20 C +68F ) 128
158
7.81
9.64
HR 1500 - 050 - A - N
HR 1500 - 063 - A - N
~1,61
~1,81
~3.55
~4.00
HR 1500 - 075 - A - N 75 2.95 204 8.03 129 5.08 187 11.41 HR 1500 - 075 - A - N ~1,90 ~4.24
HR 1500 - 080 - A - N 80 3.15 214 8.43 134 5.28 199 12.14 HR 1500 - 080 - A - N ~2,06 ~4.55
HR 1500 - 100 - A - N 100 3.94 254 10.00 154 6.06 246 15.01 HR 1500 - 100 - A - N ~2,38 ~5.25
HR 1500 - 125 - A - N 125 4.92 304 11.97 179 7.05 306 18.67 HR 1500 - 125 - A - N ~2,86 ~6.31
Info pg. 185
Special Springs 50
HR 2400
Miniature height, maximum force -
Mnima altura, mxima fuerza
5385
4,6
.18
M6 4885
M8 x 6 (4x)
Force (daN)
4385
45 3885
1.77 3385
M8
Ra < 0,05 40 2885
HV ~ 1000 1.57
2385
Cu
.04
Cu (mm)
1
HR
(Cycles / min)
2.76 .1
67
HRF
.2
.24
2.64
5
6
.31
75 0,3 75 0,3
8
( Cu 13 - 125 ) ( Cu 10 ) Cu (mm)
Fixings
(10) HR2400-050-A
(10) HR2400-050-A-NA
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 75 + .02 FC 75 A
Drop-ln FB 75 - FBA 75 FS2A 75 FCQ 75 A FSA 75
Technical specifications
HR 2400 - 010 - A 10 0.39 65 2.56 55 2.17 50 3.05 HR 2400 - 010 - A - NA ~1,47 ~3.25
HR 2400 - 013 - A 13 0.51 71 2.79 58 2.28 61 3.72 HR 2400 - 013 - A - NA ~1,52 ~3.39
HR 2400 - 016 - A 16 0.63 77 3.03 61 2.40 72 4.39 HR 2400 - 016 - A - NA ~1,58 ~3.52
HR 2400 - 019 - A 19 0.75 83 3.27 64 2.52 82 5.00 HR 2400 - 019 - A - NA ~1,65 ~3.68
HR 2400 - 025 - A 25 0.98 95 3.74 70 2.76 104 6.35 HR 2400 - 025 - A - NA ~1,77 ~3.90
2385
HR 2400 - 032 - A 32 1.26 109 4.76 77 3.27 129 7.87 HR 2400 - 032 - A - NA ~1,93 ~4.31
HR 2400 - 038 - A 38 1.50 121 4.29 83 3.03 5366 150 9.15 HR 2400 - 038 - A - NA ~2,05 ~4.52
HR 2400 - 050 - A
HR 2400 - 063 - A
50
63
1.97
2.48
145
171
5.71
6.73
95
108
3.74
4.25 ( 5%
+20 C +68F ) 193
240
11.78
14.65
HR 2400 - 050 - A - NA
HR 2400 - 063 - A - NA
~2,30
~2,55
~5.08
~5.63
HR 2400 - 075 - A 75 2.95 195 7.68 120 4.72 283 17.27 HR 2400 - 075 - A - NA ~2,75 ~6.13
HR 2400 - 080 - A 80 3.15 205 8.07 125 4.92 301 18.37 HR 2400 - 080 - A - NA ~2,85 ~6.29
HR 2400 - 100 - A 100 3.94 245 9.65 145 5.71 372 22.70 HR 2400 - 100 - A - NA ~3,28 ~7.24
HR 2400 - 125 - A 125 4.92 295 11.61 170 6.69 462 28.19 HR 2400 - 125 - A - NA ~3,93 ~8.67
Info pg. 185
Special Springs 51
HR 2400N
linkable G1/8"
FIAT spec. Miniature height, maximum force -
Mnima altura, mxima fuerza
5385
5,5
.22
G1/8 4885
M8 x 13 (4x)
Force (daN)
4385
3885
3385
45
1.77 Ra < 0,05 40 2885
M8 HV ~ 1000 1.57
2385
Cu (mm)
Cu
.04
(Cycles / min)
70 R 2,5
L min
2.76 .1
67
.2
2.64
5
75 0,3
10,5
.31
8
.41
2.95 .01
Cu (mm)
Fixings
(10) HR2400-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 75 + .02 FC 75 A
Drop-ln FB 75 - FBA 75 FS2A 75 FCQ 75 A FSA 75
Technical specifications
HR 2400 - 010 - A - N 10 0.39 75 2.95 65 2.56 50 3.05 HR 2400 - 010 - A - N ~1,76 ~3.87
HR 2400 - 013 - A - N 13 0.51 81 3.19 68 2.68 61 3.72 HR 2400 - 013 - A - N ~1,82 ~4.00
HR 2400 - 016 - A - N 16 0.63 87 3.43 71 2.80 72 4.39 HR 2400 - 016 - A - N ~1,89 ~4.16
HR 2400 - 019 - A - N 19 0.75 93 3.66 74 2.91 82 5.00 HR 2400 - 019 - A - N ~1,94 ~4.27
HR 2400 - 025 - A - N 25 0.98 105 4.13 80 3.15 2385 104 6.35 HR 2400 - 025 - A - N ~2,03 ~4.47
HR 2400 - 032 - A - N 32 1.26 119 4.69 87 3.43 5366 129 7.87 HR 2400 - 032 - A - N ~2,16 ~4.75
HR 2400 - 038 - A - N 38 1.50 131 5.16 93 3.66 150 9.15 HR 2400 - 038 - A - N ~2,30 ~5.06
HR 2400 - 050 - A - N
HR 2400 - 063 - A - N
50
63
1.97
2.48
155
181
6.10
7.12
105
118
4.13
4.65
( 5%
+20 C +68F ) 193
240
11.78
14.65
HR 2400 - 050 - A - N
HR 2400 - 063 - A - N
~2,56
~2,79
~5.63
~6.14
HR 2400 - 075 - A - N 75 2.95 205 8.07 130 5.12 283 17.27 HR 2400 - 075 - A - N ~2,90 ~6.38
HR 2400 - 080 - A - N 80 3.15 215 8.46 135 5.31 301 18.37 HR 2400 - 080 - A - N ~3,12 ~6.86
HR 2400 - 100 - A - N 100 3.94 255 10.04 155 6.10 372 22.70 HR 2400 - 100 - A - N ~3,62 ~7.96
HR 2400 - 125 - A - N 125 4.92 305 12.01 180 7.09 462 28.19 HR 2400 - 125 - A - N ~4,02 ~8.84
Info pg. 185
Special Springs 52
HR 4200
Miniature height, maximum force -
Mnima altura, mxima fuerza
4,5
.18
M6
M8 x 8 (4x)
Force (daN)
60
2.36 60
Ra < 0,05
M8 HV ~ 1000 2.36
Cu (mm)
Cu
.04
HR
(Cycles / min)
90 R 2,5 HRF
L min
3.54 .1
87
.2
3.42
5
.27
7
95 0,3
.31
8
3.74 .01
Cu (mm)
Fixings
(10) HR4200-050-A
(10) HR4200-050-A-NA
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 95 + .02 FC 95 A
Drop-ln FB 95 - FBA 95 FS2A 95 FCQ 95 A FSA 95
Technical specifications
HR 4200 - 016 - A 16 0.63 97 3.82 81 3.19 144 8.79 HR 4200 - 016 - A - NA ~3,40 ~7.58
HR 4200 - 019 - A 19 0.75 103 4.06 84 3.30 162 9.89 HR 4200 - 019 - A - NA ~3,45 ~7.69
HR 4200 - 025 - A 25 0.98 115 4.53 90 3.54 198 12.08 HR 4200 - 025 - A - NA ~3,65 ~8.06
HR 4200 - 032 - A 32 1.26 129 5.08 97 3.82 4240 240 14.65 HR 4200 - 032 - A - NA ~3,82 ~8.52
HR 4200 - 038 - A 38 1.50 141 5.55 103 4.06 276 16.84 HR 4200 - 038 - A - NA ~4,00 ~8.83
9540
HR 4200 - 050 - A 50 1.97 165 6.50 115 4.53 348 21.24 HR 4200 - 050 - A - NA ~4,44 ~9.80
HR 4200 - 063 - A
HR 4200 - 075 - A
63
75
2.48
2.95
191
215
7.52
8.46
128
140
5.04
5.51 ( 5%
+20 C +68F ) 425
497
25.94
30.33
HR 4200 - 063 - A - NA
HR 4200 - 075 - A - NA
~4,95
~5,20
~10.93
~11.60
HR 4200 - 080 - A 80 3.15 225 8.86 145 5.71 527 32.16 HR 4200 - 080 - A - NA ~5,41 ~11.94
HR 4200 - 100 - A 100 3.94 265 10.43 165 6.50 647 39.48 HR 4200 - 100 - A - NA ~6,00 ~13.25
HR 4200 - 125 - A 125 4.92 315 12.40 190 7.48 797 48.64 HR 4200 - 125 - A - NA ~6,70 ~14.85
Info pg. 185
Special Springs 53
HR 4200N
linkable G1/8"
FIAT spec. Miniature height, maximum force -
Mnima altura, mxima fuerza
5,5
.22
G1/8
M8 x 13 (4x)
Force (daN)
60
2.36 60
Ra < 0,05
M8 HV ~ 1000 2.36
Cu (mm)
Cu
.04
(Cycles / min)
90 R 2,5
L min
3.54 .1
87
.2
3.42
5
10,5
.31
95 0,3
.41
3.74 .01
Cu (mm)
Fixings
(10) HR4200-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 95 + .02 FC 95 A
Drop-ln FB 95 - FBA 95 FS2A 95 FCQ 95 A FSA 95
Technical specifications
HR 4200 - 016 - A - N 16 0.63 107 4.21 91 3.58 144 8.79 HR 4200 - 016 - A - N ~4,00 ~7.58
HR 4200 - 019 - A - N 19 0.75 113 4.45 94 3.70 162 9.89 HR 4200 - 019 - A - N ~4,05 ~7.69
HR 4200 - 025 - A - N 25 0.98 125 4.92 100 3.94 198 12.08 HR 4200 - 025 - A - N ~4,16 ~8.06
HR 4200 - 032 - A - N 32 1.26 139 5.47 107 4.21 4240 240 14.65 HR 4200 - 032 - A - N ~4,39 ~8.52
HR 4200 - 038 - A - N 38 1.50 151 5.94 113 4.49 276 16.84 HR 4200 - 038 - A - N ~4,56 ~8.83
9540
HR 4200 - 050 - A - N 50 1.97 175 6.89 125 4.92 348 21.24 HR 4200 - 050 - A - N ~4,81 ~9.80
HR 4200 - 063 - A - N
HR 4200 - 075 - A - N
63
75
2.48
2.95
201
225
7.91
8.86
138
150
5.43
5.91 ( 5%
+20 C +68F ) 425
497
25.94
30.33
HR 4200 - 063 - A - N
HR 4200 - 075 - A - N
~5,35
~5,55
~10.93
~11.60
HR 4200 - 080 - A - N 80 3.15 235 9.25 155 6.10 527 32.16 HR 4200 - 080 - A - N ~5,83 ~11.94
HR 4200 - 100 - A - N 100 3.94 275 10.83 175 6.89 647 39.48 HR 4200 - 100 - A - N ~6,51 ~13.25
HR 4200 - 125 - A - N 125 4.92 325 12.80 200 7.87 797 48.64 HR 4200 - 125 - A - N ~7,26 ~14.85
Info pg. 185
Special Springs 54
HR 6600
Miniature height, maximum force -
Mnima altura, mxima fuerza
15630
5,5
.22
G1/8 14630
Force (daN)
12630
11630
10630
75 9630
2.95 8630
M8 Ra < 0,05 80 7630
HV ~ 1000 3.15
6630
Cu
Cu (mm)
.04
(Cycles x millions)
L 0,25
.01
HR
(Cycles / min)
115 R 2,5 HRF
L min
4.53 .1
112
4.41
.2
5
10,5
120 0,3
.31
8
.41
(10) HR6600-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 120 + .02 FC 120 A
Drop-ln FB 120 - FBA 120 FS2A 120 FCQ 120 A FSA 120
Technical specifications
HR 6600 - 016 - A 16 0.63 107 4.21 91 3.58 239 14.58 HR 6600 - 016 - A - N ~6,60 ~14.72
HR 6600 - 019 - A 19 0.75 113 4.45 94 3.70 267 16.29 HR 6600 - 019 - A - N ~6,65 ~14.83
HR 6600 - 025 - A 25 0.98 125 4.92 100 3.94 325 19.83 HR 6600 - 025 - A - N ~6,82 ~15.05
HR 6600 - 032 - A 32 1.26 139 5.47 107 4.21 6630 390 23.80 HR 6600 - 032 - A - N ~7,18 ~16.01
HR 6600 - 038 - A 38 1.50 151 5.94 113 4.45 448 27.34 HR 6600 - 038 - A - N ~7,57 ~16.71
14920
HR 6600 - 050 - A 50 1.97 175 6.89 125 4.92 561 34.23 HR 6600 - 050 - A - N ~8,18 ~18.06
HR 6600 - 063 - A
HR 6600 - 075 - A
63
75
2.48
2.95
201
225
7.91
8.86
138
150
5.43
5.91 ( 5%
+20 C +68F ) 684
797
41.74
48.64
HR 6600 - 063 - A - N
HR 6600 - 075 - A - N
~8,81
~8,95
~19.45
~19.72
HR 6600 - 080 - A 80 3.15 235 9.25 155 6.10 845 51.57 HR 6600 - 080 - A - N ~9,10 ~20.05
HR 6600 - 100 - A 100 3.94 275 10.83 175 6.89 1034 63.10 HR 6600 - 100 - A - N ~10,7 ~23.62
HR 6600 - 125 - A 125 4.92 325 12.80 200 7.87 1271 77.56 HR 6600 - 125 - A - N ~12,5 ~27.59
Info pg. 185
Special Springs 55
HR 11800
Miniature height, maximum force -
Mnima altura, mxima fuerza
5,5
G1/8
.22
23780
M10 x 13 (4x)
Force (daN)
20780
17780
100
3.94 14780
M8 Ra < 0,05 100
HV ~ 1000 3.94
11780
Cu
Cu (mm)
.12
(Cycles x millions)
L 0,25
.01
(Cycles / min)
145 R 2,5
L min
5.71 .1
142
5.59
.2
5
150 0,3
10,5
.31
.41
(10) HR11800-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 150 + .02 FC 150 A
Drop-ln FB 150 - FBA 150 FS2A 150 FCQ 150 A FSA 150
Technical specifications
HR 11800 - 019 - A 19 0.75 116 4.56 97 3.82 559 34.11 HR 11800 - 019 - A - N ~9,57 ~21.12
HR 11800 - 025 - A 25 0.98 128 5.03 103 4.05 663 40.46 HR 11800 - 025 - A - N ~9,96 ~21.98
HR 11800 - 032 - A 32 1.26 142 5.59 110 4.33 784 47.84 HR 11800 - 032 - A - N ~10,41 ~22.96
HR 11800 - 038 - A 38 1.50 154 6.06 116 4.57 11780 887 54.13 HR 11800 - 038 - A - N ~10,81 ~23.84
HR 11800 - 050 - A 50 1.97 178 7.00 128 5.04 26510 1095 66.82 HR 11800 - 050 - A - N ~11,59 ~25.60
( )
HR 11800 - 063 - A 63 2.48 204 8.03 141 5.55 1320 80.55 HR 11800 - 063 - A - N ~11,88 ~27.37
5%
HR 11800 - 075 - A 75 2.95 228 8.98 153 6.02 1527 93.18 HR 11800 - 075 - A - N ~12,21 ~26.27
+20 C +68F
HR 11800 - 080 - A 80 3.15 238 9.37 158 6.22 1614 98.49 HR 11800 - 080 - A - N ~12,43 ~26.93
HR 11800 - 100 - A 100 3.94 278 10.94 178 7.00 1960 119.61 HR 11800 - 100 - A - N ~13,51 ~29.80
HR 11800 - 125 - A 125 4.92 328 12.91 203 7.99 2392 145.97 HR 11800 - 125 - A - N ~15,14 ~33.33
Info pg. 185
Special Springs 56
HR
HRF
Special Springs 57
LI SERIES
Low pressure increase -
Mnimo aumento de presin
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
LI 400 45 1.77 13 - 100 0.51 - 3.94 400 900 - - -
LI 400 N 45 1.77 13 - 100 0.51 - 3.94 400 900 - - -
LI 900 63 2.48 25 - 125 0.98 - 4.92 900 2027 - - -
LI 900 N 63 2.48 25 - 125 0.98 - 4.92 900 2027 - - -
LI 1400 75 2.95 25 - 125 0.98 - 4.92 1410 3175 - - -
LI 1400 N 75 2.95 25 - 125 0.98 - 4.92 1410 3175 - - -
LI 2000 95 3.74 25 - 125 0.98 - 4.92 2035 4583 - - -
LI 2000 N 95 3.74 25 - 125 0.98 - 4.92 2035 4583 - - -
LI 3200 120 4.72 25 - 125 0.98 - 4.92 3180 7162 - - -
Special Springs 58
LI 400
Low pressure increase -
Mnimo aumento de presin
Force (daN)
M8 x 4 (2x)
16
.63
Ra < 0,05 20
M6 .79
HV ~ 1000
Cu (mm)
Cu
(Cycles x millions)
.57
L 0,25
.01
(Cycles / min)
43 R1
L min
1.69 .04
40
3,5
.14
1.57 LI
45 0,3
.16
4
(10) LI400-050-A
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 45 + .02 FC 45 A
Drop-ln FB 45 - FBA 45 FS2A 45 FCQ 45 A FSA 45
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
Special Springs 59
LI 400N
linkable G1/8"
Low pressure increase -
Mnimo aumento de presin
4,7
.19
G1/8
Force (daN)
M8 x 8 (2x)
16
.63 Ra < 0,05 20
HV ~ 1000 .79
Cu (mm)
Cu
(Cycles x millions)
.57
L 0,25
.01
(Cycles / min)
43 R1
L min
1.69 .04
40
1.57
3,5
.14
10,5
45 0,3
.16
.41
(10) LI400-050-A-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 45 + .02 FC 45 A
Drop-ln FB 45 - FBA 45 FS2A 45 FCQ 45 A FSA 45
Technical specifications
LI 400 - 013 - A - N 13 0.51 68 2.68 55 2.17 16 0.98 LI 400 - 013 - A - N ~0,48 ~1.06
LI 400 - 025 - A - N 25 0.98 92 3.62 67 2.64 27 1.65 LI 400 - 025 - A - N ~0,55 ~1.21
400
LI 400 - 032 - A - N 32 1.26 106 4.17 74 2.91 34 2.07 LI 400 - 032 - A - N ~0,60 ~1.32
LI 400 - 038 - A - N 38 1.50 118 4.65 80 3.15 900 41 2.50 LI 400 - 038 - A - N ~0,63 ~1.39
LI 400 - 050 - A - N
LI 400 - 063 - A - N
50
63
1.97
2.48
142
168
5.59
6.61
92
105
3.62
4.13 ( 5%
+20 C +68F ) 54
68
3.30
4.15
LI 400 - 050 - A - N
LI 400 - 063 - A - N
~0,70
~0,77
~1.54
~1.69
LI 400 - 080 - A - N 80 3.15 202 7.95 122 4.80 86 5.25 LI 400 - 080 - A - N ~0,88 ~1.94
LI 400 - 100 - A - N 100 3.94 242 9.53 142 5.59 107 6.53 LI 400 - 100 - A - N ~0,99 ~2.18
Info pg. 185
Special Springs 60
LI 900
Low pressure increase -
Mnimo aumento de presin
.16
M6
Force (daN)
M8 x 5 (2x)
24
.94 Ra < 0,05 20
HV ~ 1000 .79
Cu (mm)
Cu
(Cycles / min)
59 R2
L min
2.32 .08
56
.0.2
LI
5,5
2.20
5
.22
63 0,3
.31
8
2.48 .01
Cu (mm)
Fixings
(10) LI900-050-A
Technical specifications
LI 900 - 025 - A 25 0.98 94 3.70 69 2.72 24 1.46 LI 900 - 025 - A - NA ~1,16 ~2.56
LI 900 - 032 - A 32 1.26 108 4.25 76 2.99 38 2.32 LI 900 - 032 - A - NA ~1,24 ~2.74
900
LI 900 - 038 - A 38 1.50 120 4.72 82 3.23 51 3.11 LI 900 - 038 - A - NA ~1,30 ~2.87
LI 900 - 050 - A 50 1.97 144 5.67 94 3.70 2027 76 4.64 LI 900 - 050 - A - NA ~1,45 ~3.20
LI 900 - 063 - A
LI 900 - 080 - A
63
80
2.48
3.15
170
204
6.69
8.03
107
124
4.21
4.88 ( 5%
+20 C +68F ) 103 6.29
139 8.48
LI 900 - 063 - A - NA
LI 900 - 080 - A - NA
~1,60
~1,80
~3.53
~3.97
LI 900 - 100 - A 100 3.94 244 9.61 144 5.67 182 11.11 LI 900 - 100 - A - NA ~2,03 ~4.48
LI 900 - 125 - A 125 4.92 294 11.57 169 6.65 235 14.34 LI 900 - 125 - A - NA ~2,34 ~5.16
Info pg. 185
Special Springs 61
LI 900N
linkable G1/8"
Low pressure increase -
Mnimo aumento de presin
5,5
.22
G1/8
Force (daN)
M8 x 12 (2x)
24
.94 Ra < 0,05 20
HV ~ 1000 .79
Cu (mm)
Cu
(Cycles / min)
59 R2
L min
2.32 .08
56
.0.2
2.20
5
63 0,3
10,5
.31
.41
2.48 .01
Cu (mm)
Fixings
(10) LI900-050-A-N
+ 1,0 + 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 63 + .02 FC 63 A
Drop-ln FB 50 - FBA 50 FS2A 63 FCQ 63 A
Technical specifications
LI 900 - 025 - A - N 25 0.98 104 4.09 79 3.11 24 1.46 LI 900 - 025 - A - N ~1,23 ~2.71
LI 900 - 032 - A - N 32 1.26 118 4.65 86 3.39 38 2.32 LI 900 - 032 - A - N ~1,30 ~2.86
900
LI 900 - 038 - A - N 38 1.50 130 5.12 92 3.62 51 3.11 LI 900 - 038 - A - N ~1,37 ~3.01
LI 900 - 050 - A - N 50 1.97 154 6.06 104 4.09 2027 76 4.64 LI 900 - 050 - A - N ~1,52 ~3.34
LI 900 - 063 - A - N
LI 900 - 080 - A - N
63
80
2.48
3.15
180
214
7.09
8.42
117
134
4.61
5.28 ( 5%
+20 C +68F ) 103
139
6.29
8.48
LI 900 - 063 - A - N
LI 900 - 080 - A - N
LI 900 - 100 - A - N
~1,67
~1,87
~3.67
~4.11
LI 900 - 100 - A - N 100 3.94 254 10 154 6.06 182 11.11 ~2,10 ~4.62
LI 900 - 125 - A - N 125 4.92 304 11.97 179 7.05 235 14.34 LI 900 - 125 - A - N ~2,41 ~5.30
Info pg. 185
Special Springs 62
LI 1400
Low pressure increase -
Mnimo aumento de presin
2010
4,6
.18
M6
1910
M8 x 6 (4x)
Force (daN)
1810
1710
1610
30
1.18 Ra < 0,05 40 1510
M8 1.57
HV ~ 1000
1410
Cu (mm)
Cu
(Cycles / min)
70 R 2,5
L min
2.76 .1
67
2.64
LI
.2
.24
5
6
.31
75 0,3
8
Technical specifications
LI 1400 - 025 - A 25 0.98 95 3.74 70 2.76 93 5.68 LI 1400 - 025 - A - NA ~1,62 ~3.56
LI 1400 - 032 - A 32 1.26 109 4.29 77 3.03 115 7.02 LI 1400 - 032 - A - NA ~1,74 ~3.83
1410
LI 1400 - 038 - A 38 1.50 121 4.76 83 3.27 134 8.18 LI 1400 - 038 - A - NA ~1,83 ~4.03
LI 1400 - 050 - A 50 1.97 145 5.71 95 3.74 3175 172 10.50 LI 1400 - 050 - A - NA ~1,99 ~4.33
LI 1400 - 063 - A
LI 1400 - 080 - A
63
80
2.48
3.15
171
205
6.73
8.07
108
125
4.25
4.92 ( 5%
+20 C +68F ) 213
266
13.00
16.23
LI 1400 - 063 - A - NA
LI 1400 - 080 - A - NA
~2,20
~2,62
~4.84
~5.76
LI 1400 - 100 - A 100 3.94 245 9.64 145 5.71 329 20.08 LI 1400 - 100 - A - NA ~2,77 ~6.09
LI 1400 - 125 - A 125 4.92 295 11.61 170 6.69 408 24.90 LI 1400 - 125 - A - NA ~3,27 ~7.19
Info pg. 185
Special Springs 63
LI 1400N
linkable G1/8"
Low pressure increase -
Mnimo aumento de presin
2010
5,5
.22
G1/8
1910
M8 x 13 (4x)
Force (daN)
1810
1710
1610
30
1.18 Ra < 0,05 40 1510
M8 1.57
HV ~ 1000
1410
Cu (mm)
Cu
(Cycles / min)
70 R 2,5
L min
2.76 .1
67
2.64
.2
5
10,5
.31
75 0,3
.41
(10) LI1400-050-A-N
+ 1,0 + 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 75 + .02 FC 75 A
Drop-ln FB 75 - FBA 75 FS2A 75 FCQ 75 A FSA 75
Technical specifications
LI 1400 - 025 - A - N 25 0.98 105 4.13 80 3.15 93 5.68 LI 1400 - 025 - A - N ~1,70 ~3.74
LI 1400 - 032 - A - N 32 1.26 119 4.69 87 3.43 115 7.02 LI 1400 - 032 - A - N ~1,80 ~3.96
1410
LI 1400 - 038 - A - N 38 1.50 131 5.16 93 3.66 134 8.18 LI 1400 - 038 - A - N ~1,91 ~4.20
LI 1400 - 050 - A - N 50 1.97 155 6.10 105 4.13 3175 172 10.50 LI 1400 - 050 - A - N ~2,07 ~4.55
LI 1400 - 063 - A - N
LI 1400 - 080 - A - N
63
80
2.48
3.15
181
215
7.13
8.46
118
135
4.65
5.31 ( 5%
+20 C +68F ) 213
266
13.00
16.23
LI 1400 - 063 - A - N
LI 1400 - 080 - A - N
~2,27
~2,70
~4.99
~5.94
LI 1400 - 100 - A - N 100 3.94 255 10.04 155 6.10 329 20.08 LI 1400 - 100 - A - N ~2,85 ~6.27
LI 1400 - 125 - A - N 125 4.92 305 12.01 180 7.09 408 24.90 LI 1400 - 125 - A - N ~3,35 ~7.37
Info pg. 185
Special Springs 64
LI 2000
Low pressure increase -
Mnimo aumento de presin
4,5
M6
.18
M8 x 8 (4x)
Force (daN)
36
1.42 Ra < 0,05 60
M8 2.36
HV ~ 1000
Cu (mm)
Cu
(Cycles / min)
90 R 2,5
L min
3.54 .1
87
LI
.2
3.42
5
.27
7
.31
95 0,3
8
Technical specifications
LI 2000 - 025 - A 25 0.98 115 4.53 90 3.54 208 12.69 LI 2000 - 025 - A - NA ~3,29 ~7.26
LI 2000 - 032 - A 32 1.26 129 5.08 97 3.82 242 14.77 LI 2000 - 032 - A - NA ~3,50 ~7.72
2035
LI 2000 - 038 - A 38 1.50 141 5.55 103 4.05 272 16.60 LI 2000 - 038 - A - NA ~3,62 ~8.00
LI 2000 - 050 - A 50 1.97 165 6.50 115 4.53 4579 332 20.26 LI 2000 - 050 - A - NA ~3,89 ~8.59
LI 2000 - 063 - A
LI 2000 - 080 - A
63
80
2.48
3.15
191
225
7.52
8.86
128
145
5.04
5.71 ( 5%
+20 C +68F ) 396
480
24.17
29.29
LI 2000 - 063 - A - NA
LI 2000 - 080 - A - NA
~4,24
~4,78
~9.36
~10.6
LI 2000 - 100 - A 100 3.94 265 10.43 165 6.50 579 35.33 LI 2000 - 100 - A - NA ~5,16 ~11.4
LI 2000 - 125 - A 125 4.92 315 12.40 190 7.48 703 42.90 LI 2000 - 125 - A - NA ~5,82 ~12.8
Info pg. 185
Special Springs 65
LI 2000N
linkable G1/8"
Low pressure increase -
Mnimo aumento de presin
2735
5,5
.22
G1/8 2635
M8 x 13 (4x)
Force (daN)
2535
2435
2335
36
2235
1.42 60
Ra < 0,05
M8 2.36
2135
HV ~ 1000
2035
Cu (mm)
Cu
(Cycles / min)
90 R 2,5
L min
3.54 .1
87
.2
3.42
5
10,5
.31
.41
95 0,3
8
(10) LI2000-050-A-N
+ 1,0 + 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 Bottom mount FS2 95 + .02 FC 95 A
Drop-ln FB 95 - FBA 95 FS2A 95 FCQ 95 A FSA 95
Technical specifications
LI 2000 - 025 - A - N 25 0.98 125 4.92 100 3.94 208 12.69 LI 2000 - 025 - A - N ~3,40 ~7.48
LI 2000 - 032 - A - N 32 1.26 139 5.47 107 4.21 242 14.77 LI 2000 - 032 - A - N ~3,57 ~7.85
2035
LI 2000 - 038 - A - N 38 1.50 151 5.94 113 4.45 272 16.60 LI 2000 - 038 - A - N ~3,73 ~8.21
LI 2000 - 050 - A - N 50 1.97 175 6.89 125 4.92 4579 332 20.26 LI 2000 - 050 - A - N ~4,00 ~8.82
LI 2000 - 063 - A - N
LI 2000 - 080 - A - N
63
80
2.48
3.15
201
235
7.91
9.25
138
155
5.43
6.10 ( 5%
+20 C +68F ) 396
480
24.17
29.29
LI 2000 - 063 - A - N
LI 2000 - 080 - A - N
~4,35 ~9.57
~4,89 ~10.76
LI 2000 - 100 - A - N 100 3.94 275 10.83 175 6.89 579 35.33 LI 2000 - 100 - A - N ~5,57 ~12.25
LI 2000 - 125 - A - N 125 4.92 325 12.80 200 7.87 703 42.90 LI 2000 - 125 - A - N ~5,93 ~13.05
Info pg. 185
Special Springs 66
LI 3200
Low pressure increase -
Mnimo aumento de presin
4180
5,5
.22
G1/8 4080
M10 x 10 (4x) 3980
Force (daN)
3880
3780
3680
3580
45
3480
1.77
M8 Ra < 0,05 80 3380
3280
HV ~ 1000 3.15
3180
Cu
Cu (mm)
.04
(Cycles x millions)
L 0,25
.01
(Cycles / min)
115 R 2,5
L min
4.53 .1
112
4.41
LI
.2
5
10,5
.31
120 0,3
.41
Technical specifications
LI 3200 - 025 - A 25 0.98 125 4.92 100 3.94 343 20.93 LI 3200 - 025 - A - N ~4,74 ~10.46
LI 3200 - 032 - A 32 1.26 139 5.47 107 4.21 398 24.29 LI 3200 - 032 - A - N ~5,61 ~12.38
3180
LI 3200 - 038 - A 38 1.50 151 5.94 113 4.49 445 27.16 LI 3200 - 038 - A - N ~6,48 ~14.30
LI 3200 - 050 - A 50 1.97 175 6.89 125 4.92 7162 539 32.89 LI 3200 - 050 - A - N ~6,97 ~15.38
LI 3200 - 063 - A
LI 3200 - 080 - A
LI 3200 - 100 - A
63
80
100
2.48
3.15
3.94
201
235
275
7.91
9.25
10.83
138
155
175
5.43
6.10
6.89
( 5%
+20 C +68F ) 641
774
932
39.12
47.23
56.87
LI 3200 - 063 - A - N
LI 3200 - 080 - A - N
LI 3200 - 100 - A - N
~7,46
~8,21
~8,94
~16.47
~18.12
~19.73
LI 3200 - 125 - A 125 4.92 325 12.79 200 7.87 1127 68.77 LI 3200 - 125 - A - N ~10,08 ~22.25
Info pg. 185
Special Springs 67
S SERIES
ISO forces, low profile - ISO fuerzas, altura reducida
Over
Pressure
Active
Safety
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
S 500 1.77 45 0.24 - 4.92 6 - 125 1058 470 - - -
S 750 1.97 50 0.24 - 4.92 6 - 125 1665 740 - - -
S 1500 2.95 75 0.98 - 3.94 25 - 100 3442 1530 - -
S 3000 3.74 95 0.98 - 3.94 25 - 100 6626 2945 - -
Special Springs 68
S 500
ISO forces, low profile - ISO fuerzas, altura reducida
870
5,5
.22
820
G1/8
770
Force (daN)
20 M8 x 12 (2x)
720
.78 670
M8
620
Ra < 0,05
570
HV ~ 1000 20
Cu
520
.78
470
.08
2
6 13 19 25 38 50 63 80 100 125
Cu (mm)
15,5
.61
R1
Minimum estimated life
43
(Cycles x millions)
1.69 .04
L min
(Cycles / min)
40
3,5
1.57
.14
45 0,3
S
.16
10
.39
(10) S 500-050-A-N
+ 1,0
+ 1,0
Body + 0,5
Body + 0,5 + .04
+ .04
+ .02
Bottom mount FS2 45 + .02 FC 45 A
Drop-ln FB 45 - FBA 45 FS2A 45 FCQ 45 A FSA 45
Technical specifications
S500 - 006 - A 06 0.24 62 2.44 56 2.20 7,1 0.43 S500 - 006 - A - N ~0,51 ~1.12
S500 - 013 - A 13 0.51 76 2.99 63 2.48 14,4 0.88 S500 - 013 - A - N ~0,56 ~1.23
470
S500 - 019 - A 19 0.75 88 3.46 69 2.72 20,6 1.26 S500 - 019 - A - N ~0,60 ~1.32
S500 - 025 - A 25 0.98 100 3.94 75 2.95 1058 26,9 1.64 S500 - 025 - A - N ~0,65 ~1.43
S500 - 038 - A
S500 - 050 - A
S500 - 063 - A
38
50
63
1.50
1.97
2.48
126
150
176
4.96
5.91
6.93
88
100
113
3.46
3.94
4.45
( 5%
+20 C +68F ) 40,4
52,9
66,4
2.47
3.23
4.05
S500 - 038 - A - N
S500 - 050 - A - N
S500 - 063 - A - N
~0,74
~0,83
~0,96
~1.63
~1.83
~2.11
S500 - 080 - A 80 3.15 210 8.27 130 5.12 84,1 5.13 S500 - 080 - A - N ~0,99 ~2.18
S500 - 100 - A 100 3.94 250 9.84 150 5.91 104,9 6.40 S500 - 100 - A - N ~1,14 ~2.51
S500 - 125 - A 125 4.92 300 11.81 175 6.89 130,7 7.98 S500 - 125 - A - N ~1,32 ~2.90
Info pg. 185
Special Springs 69
S 750
ISO forces, low profile - ISO fuerzas, altura reducida
1640
5,5
.22
1540
G1/8
1440
Force (daN)
25 M8 x 13 (2x) 1340
.98 1240
M8 1140
HV ~ 1000 20
940
Cu
840
.79
740
.12
3
6 13 19 25 38 50 63 80 100 125
Cu (mm)
14,5
.57
R2
Minimum estimated life
46
(Cycles x millions)
1.81 .08
L min
(Cycles / min)
43
.20
1.69
5
10,5
.31
50 0,3
.41
Technical specifications
S750 - 006 - A 6 0.24 62 2.44 56 2.20 39,5 2.41 S750 - 006 - A - N ~0,59 ~1.30
S750 - 013 - A 13 0.51 76 2.99 63 2.48 49,7 3.03 S750 - 013 - A - N ~0,65 ~1.43
740
S750 - 019 - A 19 0.75 88 3.46 69 2.72 58,5 3.57 S750 - 019 - A - N ~0,70 ~1.54
S750 - 025 - A 25 0.98 100 3.94 75 2.95 1665 67,2 4.10 S750 - 025 - A - N ~0,76 ~1.67
S750 - 038 - A
S750 - 050 - A
38
50
1.50
1.97
2.48
126
150
4.96
5.91
88
100
3.46
3.94 ( 5%
+20 C +68F ) 86,2
103,7
5.26
6.33
S750 - 038 - A - N
S750 - 050 - A - N
~0,80
~1,00
~1.76
~2.20
S750 - 063 - A 63 176 6.93 113 4.45 122,6 7.48 S750 - 063 - A - N ~1,10 ~2.42
S750 - 080 - A 80 3.15 210 8.27 130 5.12 147,4 8.99 S750 - 080 - A - N ~1,70 ~3.74
S750 - 100 - A 100 3.94 250 9.84 150 5.91 176,6 10.78 S750 - 100 - A - N ~1,96 ~4.31
S750 - 125 - A 125 4.92 300 11.81 175 6.89 213 13.00 S750 - 125 - A - N ~2,07 ~4.55
Info pg. 185
Special Springs 70
S 1500
ISO forces, low profile - ISO fuerzas, altura reducida
3500
3300
5,5
G 1/8"
.22
3100
M8 x 13 (4x) 2900
Force (daN)
36 2700
1.42 2500
M8 2300
1.58 1530
.12
25 38 50 63 80 100
3
Cu (mm)
.71
18
R 2,5
Minimum estimated life
70
(Cycles x millions)
2.76 .1
L min
(Cycles / min)
67
2.63
.20
5
75 0,3
S
10,5
.31
.41
Technical specifications
S1500 - 025 - A 25 0.98 110 4.33 85 3.35 81,3 4.96 S1500 - 025 - A - N ~1,93 ~4.25
1530
S1500 - 038 - A 38 1.50 136 5.35 98 3.86 123,5 7.54 S1500 - 038 - A - N ~2,18 ~4.79
S1500 - 050 - A 50 1.97 160 6.30 110 4.33 3442 162,4 9.91 S1500 - 050 - A - N ~3,64 ~8.01
S1500 - 063 - A
S1500 - 080 - A
S1500 - 100 - A
63
80
100
2.48
3.15
3.94
186
220
260
7.32
8.66
10.24
123
140
160
4.84
5.51
6.30
( 5%
+20 C +68F ) 204,5
259,7
324,5
12.48
15.85
19.80
S1500 - 063 - A - N
S1500 - 080 - A - N
S1500 - 100 - A - N
~3,91
~4,28
~4,72
~8.60
~9.42
~10.38
Info pg. 185
Special Springs 71
S 3000
Forze ISO, altezza ridotta - ISO forces, low profile - ISO Krfte, Verminderung der Hhe -
ISO forces, hauteur rduite - ISO fuerzas, altura reducida - ISO potncia, altura reduzida
7445
5,5
G 1/8"
.22
6945
6445
M8 x 13 (4x)
Force (daN)
50 5945
1.97 5445
M8 4945
HV ~ 1000 60
3945
Cu
3445
2.36
.12
2945
3
25 38 50 63 80 100
Cu (mm)
24
.94
R 2,5
Minimum estimated life
90
(Cycles x millions)
3.54 .10
L min
(Cycles / min)
87
3.43
.20
5
10,5
95 0,3
.31
.41
Technical specifications
S3000 - 025 - A 25 0.98 120 4.72 95 3.74 169,9 10.37 S3000 - 025 - A - N ~4,07 ~8.95
1530
S3000 - 038 - A 38 1.50 146 5.75 108 4.25 243,3 14.85 S3000 - 038 - A - N ~4,53 ~9.97
S3000 - 050 - A 50 1.97 170 6.69 120 4.72 3442 311 18.98 S3000 - 050 - A - N ~5,16 ~11.35
S3000 - 063 - A
S3000 - 080 - A
63
80
2.48
3.15
196
230
7.72
9.06
133
150
5.24
5.91 ( 5%
+20 C +68F ) 384,3
480,3
23.45
29.31
S3000 - 063 - A - N
S3000 - 080 - A - N
~5,44
~6,05
~11.97
~13.31
S3000 - 100 - A 100 3.94 270 10.63 170 6.69 593,1 36.19 S3000 - 100 - A - N ~6,78 ~14.92
Info pg. 185
Special Springs 72
S
Special Springs 73
SC SERIES
ISO 11901 ISO 11901 Standard
VDI 3003
CNOMO E24.54815.N
Permanent
Lubrication
on the
Rod
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
SC 150 32 1.26 10 - 125 0.39 - 4.92 170 383 - - -
SC 250 38 1.50 10 - 125 0.39 - 4.92 260 585 - - -
SCF 250 - - 10 - 125 0.39 - 4.92 260 585 - - -
SC 500 45 1.77 13 - 160 0.51 - 6.30 470 1.058 - - -
SCF 500 - - 13 - 160 0.51 - 6.30 470 1.058 - - -
SC 750 50 1.97 13 - 300 0.51 - 11.81 740 1.665 - - -
SCF 750 - - 13 - 300 0.51 - 11.81 740 1.665 - - -
SC 1500 75 2.95 25 - 300 0.98 - 11.81 1530 3.442 - - -
SC 3000 95 3.74 25 - 300 0.98 - 11.81 2945 6.626 - - -
SC 5000 120 4.72 25 - 300 0.98 - 11.81 4980 11.205 - - -
SC 7500 150 5.90 25 - 300 0.98 - 11.81 7540 16.875 - - -
SC 10000 195 7.68 25 - 300 0.98 - 11.81 10600 23.850 - - -
Special Springs 74
SC 150
ISO 11901 Standard ISO 11901
M8 x 6
Force (daN)
12
.47
M6
Ra < 0,05
HV ~ 1200
Cu
D
.08
2
Cu (mm)
10,5
15 n
.41
R1
.01
o
(Cycles x millions)
1.18 .04
(Cycles / min)
L min
i
0-
SC ct 27
3,5
1.06
.14
u
.16
32 0,3
4
+ .02
Drop-ln Bottom mount FS2 32 FC 32 A
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
pl t
Special Springs 75
SC 150
ISO 11901 ISO 11901 Standard
VDI 3003
CNOMO E24.54815.N
3,6
M6
.14
Force (daN)
M6 x 8 (2x)
12
M6 .47
Ra < 0,05
HV ~ 1000 18
Cu
.71
.08
2
Cu (mm)
10,5
.41
(Cycles x millions)
.18 .04
L min
(Cycles / min)
27
3,5
1.06
.14
.16
32 0,3
.24
4
6
(10) SC 150-050-D-N
+ 1,0
+ 1,0
Body + 0,5
Body + 0,5 + .04
+ .04 + .02
+ .02
Drop-ln Bottom mount FS2A 32 FC 32 A FSA 32
Technical specifications
SC 150 - 010 - D 10 0.39 70 2.76 60 2.36 6,6 0.40 SC 150 - 010 - D - N ~0,28 ~0.62
SC 150 - 013 - D 13 0.51 75,4 2.97 62,7 2.47 8,2 0.50 SC 150 - 013 - D - N ~0,29 ~0.64
SC 150 - 016 - D 16 0.63 82 3.23 66 2.6 170 9,9 0.60 SC 150 - 016 - D - N ~0,30 ~0.65
SC 150 - 025 - D 25 0.98 100 3.94 75 2.95 15 0.92 SC 150 - 025 - D - N ~0,33 ~0.73
383
SC 150 - 038 - D 38 1.50 126 4.96 88 3.46 22,2 1.34 SC 150 - 038 - D - N ~0,36 ~0.79
SC 150 - 050 - D
SC 150 - 063 - D
50
63
1.97
2.48
150
177
5.91 100
6.97 113,5
3.94
4.47 ( 5%
+20 C +68F ) 28,9
36,2
1.76
2.21
SC 150 - 050 - D - N
SC 150 - 063 - D - N
~0,40 ~0.87
~0,44 ~0.96
SC 150 - 080 - D 80 3.15 210 8.27 130 5.12 45,7 2.79 SC 150 - 080 - D - N ~0,49 ~1.08
SC 150 - 100 - D 100 3.94 250 9.84 150 5.91 56,9 3.47 SC 150 - 100 - D - N ~0,55 ~1.21
SC 150 - 125 - D 125 4.92 300 11.81 175 6.89 70,9 4.33 SC 150 - 125 - D - N ~0,64 ~1.42
Info pg. 185
Special Springs 76
SC 250
ISO 11901 Standard ISO 11901
M8 x 6
Force (daN)
15
.59
M6
Ra < 0,05
HV ~ 1000
Cu
D
.08
2
Cu (mm)
25 n
10,5
.41
R1
.01
o
.04
(Cycles x millions)
1.42
L min
(Cycles / min)
i
0-
SC ct 33
3,5
.14
1.3
u
.16
38 0,3
4
Fixings SC
SCF
(10) SC 250-050-B
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04
+ .02 FC 38 A
ed pr
+ .02
Drop-ln Bottom mount FS2 38 FCQ 38 A
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
pl t
Special Springs 77
SC 250
ISO 11901 ISO 11901 Standard
VDI 3003
CNOMO E24.54815.N
3,6
.14
M6
M6 x 8 (2x)
M6 x 8 (2x)
Force (daN)
15
.59
45
M6
25
Ra < 0,05
8
.9
HV ~ 1000
18
Cu
.71
.08
2
Cu (mm)
10,5
.41
R1
(Cycles x millions)
1.42
L min
(Cycles / min)
33
3,5
1.3
.14
38 0,3
.24
.16
6
(10) SC 250-050-D-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .02
+ .04
+ .02 FC 38 A
Drop-ln Bottom mount FS2A 38 FCQ 38 A FSA 38
Technical specifications
SC 250 - 010 - D 10 0.39 70 2.76 60 2.36 8,7 0.53 SC 250 - 010 - D - N ~0,40 ~0.88
SC 250 - 013 - D 13 0.51 75,4 2.97 62,7 2.47 10,9 0.67 SC 250 - 013 - D - N ~0,41 ~0.90
SC 250 - 016 - D 16 0.63 82 3.23 66 2.60 13,1 0.80 SC 250 - 016 - D - N ~0,43 ~0.95
260
SC 250 - 019 - D 19 0.75 88 3.46 69 2.72 16,2 0.99 SC 250 - 019 - D - N ~0,45 ~0.99
SC 250 - 025 - D 25 0.98 100 3.94 75 2.95 585 19,7 1.20 SC 250 - 025 - D - N ~0,48 ~1.06
SC 250 - 038 - D
SC 250 - 050 - D
SC 250 - 063 - D
38
50
63
1.50
1.97
2.48
126
150
177
4.96 88
5.91 100
6.97 113,5
3.46
3.94
4.47
( 5%
+20 C +68F ) 29,3
38,1
47,6
1.79
2.33
2.90
SC 250 - 038 - D - N
SC 250 - 050 - D - N
SC 250 - 063 - D - N
~0,54 ~1.19
~0,60 ~1.32
~0,66 ~1.45
SC 250 - 080 - D 80 3.15 210 8.27 130 5.12 60,1 3.67 SC 250 - 080 - D - N ~0,74 ~1.63
SC 250 - 100 - D 100 3.94 250 9.84 150 5.91 74,6 4.55 SC 250 - 100 - D - N ~0,81 ~1.80
SC 250 - 125 - D 125 4.92 300 11.81 175 6.89 93,2 5.69 SC 250 - 125 - D - N ~0,98 ~2.18
Info pg. 185
Special Springs 78
SCF 250
threaded
ISO 11901 Standard ISO 11901
VDI 3003
CNOMO E24.54815.N
3,6 .14
15
.59 M6
Force (daN)
M6
Ra < 0,05
HV ~ 1000
Cu
4,1
0.11
.08
2,8
.16
.2
5
Cu (mm)
L 0,25
.01
(Cycles / min)
14
.55
35,7
2,5
.28
.10
7
.14
M 38 x 1,5
M 38 x 1,5 Cu (mm)
Fixings SC
(10) SCF 250-050-D SCF
Technical specifications
SCF 250 - 010 - D 10 0.36 70 2.76 60 2.36 8,7 0.53 SCF 250 - 010 - D - N ~0,37 ~0.81
SCF 250 - 013 - D 13 0.51 75,4 2.97 62,7 2.47 10,9 0.67 SCF 250 - 013 - D - N ~0,38 ~0.84
SCF 250 - 016 - D 16 0.63 82 3.23 66 2.60 260 13,1 0.80 SCF 250 - 016 - D - N ~0,39 ~0.86
SCF 250 - 019 - D 19 0.75 88 3.46 69 2.72 585 16,2 0.99 SCF 250 - 019 - D - N ~0,42 ~0.92
( )
SCF 250 - 025 - D 25 0.98 100 3.94 75 2.95 19,7 1.20 SCF 250 - 025 - D - N ~0,44 ~0.97
5%
SCF 250 - 038 - D 38 1.50 126 4.96 88 3.46 29,3 1.79 SCF 250 - 038 - D - N ~0,50 ~1.10
+20 C +68F
SCF 250 - 050 - D 50 1.97 150 5.91 100 3.94 38,1 2.33 SCF 250 - 050 - D - N ~0,55 ~1.21
SCF 250 - 063 - D 63 2.48 177 6.97 113,5 4.47 47,6 2.90 SCF 250 - 063 - D - N ~0,63 ~1.39
SCF 250 - 080 - D 80 3.15 210 8.27 130 5.12 60,1 3.67 SCF 250 - 080 - D - N ~0,70 ~1.54
SCF 250 - 100 - D 100 3.94 250 9.84 150 5.91 74,6 4.55 SCF 250 - 100 - D - N ~0,75 ~1.65
SCF 250 - 125 - D 125 4.92 300 11.81 175 6.89 93,2 5.69 SCF 250 - 125 - D - N ~0,93 ~2.05
Info pg. 185
Special Springs 79
SC 500
ISO 11901 ISO 11901 Standard
VDI 3003
CNOMO E24.54815.N
5,5
G 1/8"
.22
Force (daN)
20 M8 x 13 (2x)
.79
M8
Ra < 0,05
HV ~ 1000 20
Cu
.79
.08
2
Cu (mm)
14,5
.57
R1
(Cycles x millions)
1.7
L min
(Cycles / min)
40
1.57
3,5
.14
10,5
45 0,3
.16
.41
(10) SC 500-050-B-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .02
Bottom mount FS2 45 + .04
+ .02 FC 45 A
Drop-ln FB 45 - FBA 45 FS2A 45 FCQ 45 A FSA 45
Technical specifications
SC 500 - 013 - B 13 0.51 110,4 4.35 97,7 3.85 28 1.71 SC 500 - 013 - B - N ~0,90 ~1.99
SC 500 - 025 - B 25 0.98 135 5.31 110 4.33 42 2.56 SC 500 - 025 - B - N ~1,00 ~2.20
SC 500 - 038 - B 38 1.50 161 6.34 123 4.84 470 57 3.48 SC 500 - 038 - B - N ~1,10 ~2.43
SC 500 - 050 - B 50 1.97 185 7.28 135 5.31 71 4.33 SC 500 - 050 - B - N ~1,20 ~2.65
1058
SC 500 - 063 - B 63 2.48 212 8.35 148,5 5.85 86 5.25 SC 500 - 063 - B - N ~1,30 ~2.87
SC 500 - 080 - B
SC 500 - 100 - B
80
100
3.15
3.94
245 9.65 165
285 11.22 185
6.5
7.28
( 5%
+20 C +68F ) 105
129
6.41
7.87
SC 500 - 080 - B - N
SC 500 - 100 - B - N
~1,40
~1,60
~3.09
~3.53
SC 500 - 125 - B 125 4.92 335 13.19 210 8.27 157 9.58 SC 500 - 125 - B - N ~1,80 ~3.97
SC 500 - 160 - B 160 6.3 405 15.94 245 9.65 198 12.08 SC 500 - 160 - B - N ~2,10 ~4.63
Info pg. 185
Special Springs 80
SCF 500
threaded
ISO 11901 Standard ISO 11901
VDI 3003
CNOMO E24.54815.N
5,5
.22
20
.79 G1/8
Force (daN)
M8
Ra < 0,05
HV ~ 1000
Cu
4,1
.08
2,8
.11
.16
.2
5
Cu (mm)
L 0,25
.01
(Cycles / min)
.31
8
42,7
10,5
2,8
.11
.41
1.68
M 45 x 1,5
Cu (mm)
Fixings SC
(10) SCF 500-050-A SCF
Technical specifications
SCF 500 - 013 - A 13 0.51 110,4 4.35 97,7 3.85 28 1.71 SCF 500 - 013 - A - N ~0,90 ~1.98
SCF 500 - 025 - A 25 0.98 135 5.31 110 4.33 42 2.56 SCF 500 - 025 - A - N ~0,93 ~2.05
SCF 500 - 038 - A 38 1.50 161 6.34 123 4.84 470 57 3.48 SCF 500 - 038 - A - N ~1,09 ~2.40
SCF 500 - 050 - A 50 1.97 185 7.28 135 5.31 1058 71 4.33 SCF 500 - 050 - A - N ~1,17 ~2.57
( )
SCF 500 - 063 - A 63 2.48 212 8.35 148,5 5.85 86 5.25 SCF 500 - 063 - A - N ~1,27 ~2.79
5%
SCF 500 - 080 - A 80 3.15 245 9.65 165 6.5 105 6.41 SCF 500 - 080 - A - N ~1,39 ~3.06
+20 C +68F
SCF 500 - 100 - A 100 3.94 285 11.22 185 7.28 129 7.87 SCF 500 - 100 - A - N ~1,56 ~3.43
SCF 500 - 125 - A 125 4.92 335 13.19 210 8.27 157 9.58 SCF 500 - 125 - A - N ~1,70 ~3.74
SCF 500 - 160 - A 160 6.3 405 15.94 245 9.65 198 12.08 SCF 500 - 160 - A - N ~1,87 ~4.11
Info pg. 185
Special Springs 81
SC 750
ISO 11901
VDI 3003
CNOMO E24.54815.N
5,5
G 1/8"
.22
Force (daN)
25 M8 x 13 (2x)
.98
M8
Ra < 0,05
HV ~ 1000 20
Cu
.79
.12
3
Cu (mm)
14,5
.57
R2
(Cycles x millions)
1.81 .08
L min
(Cycles / min)
43
1.69
.2
5
50 0,3
10,5
.31
.41
1.97 .01
Cu (mm)
Fixings
(10) SC 750-050-B
+ 1,0
Technical specifications
SC 750 - 013 - B 13 0.51 120,4 4.74 107,7 4.24 46 2.81 SC 750 - 013 - B - N ~1,25 ~2.76
SC 750 - 025 - B 25 0.98 145 5.71 120 4.72 64 3.91 SC 750 - 025 - B - N ~1,38 ~3.64
SC 750 - 038 - B 38 1.50 171 6.73 133 5.24 740 83 5.06 SC 750 - 038 - B - N ~1,53 ~3.38
SC 750 - 050 - B 50 1.97 195 7.68 145 5.71 101 6.16 SC 750 - 050 - B - N ~1,65 ~3.64
1665
SC 750 - 063 - B 63 2.48 222 8.74 158,5 6.24 121 7.38 SC 750 - 063 - B - N ~1,80 ~3.97
SC 750 - 080 - B
SC 750 - 100 - B
80
100
3.15
3.94
255 10.04 175 6.89
295 11.61 195 7.68
( 5%
+20 C +68F ) 145
175
8.85
10.68
SC 750 - 080 - B - N
SC 750 - 100 - B - N
~1,96
~2,09
~4.33
~4.61
SC 750 - 125 - B 125 4.92 345 13.58 220 8.66 212 12.94 SC 750 - 125 - B - N ~2,33 ~5.14
SC 750 - 160 - B 160 6.3 415 16.34 255 10.04 264 16.11 SC 750 - 160 - B - N ~2,68 ~5.91
SC 750 - 200 - B 200 7.87 495 19.49 295 11.61 323 19.71 SC 750 - 200 - B - N ~3,10 ~6.84
SC 750 - 250 - B 250 9.84 595 23.43 345 13.58 398 24.29 SC 750 - 250 - B - N ~3,60 ~7.95
SC 750 - 300 - B 300 11.81 695 27.36 395 15.55 472 28.80 SC 750 - 300 - B - N ~4,10 ~9.05
Info pg. 185
Special Springs 82
SCF 750
threaded
ISO 11901
VDI 3003
CNOMO E24.54815.N
6 .24
25
.98 G1/8
Force (daN)
M8
Ra < 0,05
HV ~ 1000
Cu
4,1
.12
2,8
.11
.16
.2
5
Cu (mm)
L 0,25
.01
(Cycles / min)
.31
8
47,7
10,5
2,8
.11
.41
1.88
M 50 x 1,5
M 50 x 1,5 Cu (mm)
Fixings SC
(10) SCF 750-050-A SCF
Technical specifications
SCF 750 - 013 - A 13 0.51 120,4 4.74 107,7 4.24 46 2.81 SCF 750 - 013 - A - N ~1,20 ~2.64
SCF 750 - 025 - A 25 0.98 145 5.71 120 4.72 64 3.91 SCF 750 - 025 - A - N ~1,30 ~2.86
SCF 750 - 038 - A 38 1.50 171 6.73 133 5.24 83 5.06 SCF 750 - 038 - A - N ~1,39 ~3.06
SCF 750 - 050 - A 50 1.97 195 7.68 145 5.71 740 101 6.16 SCF 750 - 050 - A - N ~1,51 ~3.32
SCF 750 - 063 - A 63 2.48 222 8.74 158,5 6.24 1665 121 7.38 SCF 750 - 063 - A - N ~1,60 ~3.52
80
( )
SCF 750 - 080 - A 3.15 255 10.04 175 6.89 145 8.85 SCF 750 - 080 - A - N ~1,75 ~3.85
5%
SCF 750 - 100 - A 100 3.94 295 11.61 195 7.68 175 10.68 SCF 750 - 100 - A - N ~1,97 ~4.33
+20 C +68F
SCF 750 - 125 - A 125 4.92 345 13.58 220 8.66 212 12.94 SCF 750 - 125 - A - N ~2,32 ~5.10
SCF 750 - 160 - A 160 6.3 415 16.34 255 10.04 264 16.11 SCF 750 - 160 - A - N ~2,56 ~5.63
SCF 750 - 200 - A 200 7.87 495 19.49 295 11.61 323 19.71 SCF 750 - 200 - A - N ~2,90 ~6.38
SCF 750 - 250 - A 250 9.84 595 23.43 345 13.58 398 24.29 SCF 750 - 250 - A - N ~3,49 ~7.68
SCF 750 - 300 - A 300 11.81 695 27.36 395 15.55 472 28.80 SCF 750 - 300 - A - N ~3,96 ~8.71
Info pg. 185
Special Springs 83
SC 1500
ISO 11901 ISO 11901 Standard
VDI 3003
CNOMO E24.54815.N
5,5
G 1/8"
.22
M8 x 13 (4x)
Force (daN)
36
1.42
M8
Ra < 0,05
HV ~ 1000 40
Cu
1.57
.12
3
Cu (mm)
.71
18
R 2,5
(Cycles x millions)
2.75
L min
(Cycles / min)
67
2.64
.2
5
10,5
75 0,3
.31
.41
2.95 .01
Cu (mm)
Fixings
(10) SC 1500-050-B
+ 1,0
Technical specifications
SC 1500 - 025 - B 25 .98 160 6.3 135 5.31 151 9.21 SC 1500 - 025 - B - N ~3,64 ~8.03
SC 1500 - 038 - B 38 1.50 186 7.32 148 5.83 194 11.84 SC 1500 - 038 - B - N ~3,91 ~8.63
SC 1500 - 050 - B 50 1.97 210 8.27 160 6.3 233 14.22 SC 1500 - 050 - B - N ~4,15 ~9.16
SC 1500 - 063 - B 63 2.48 237 9.33 173,5 6.83 1530 278 16.96 SC 1500 - 063 - B - N ~4,47 ~9.87
SC 1500 - 080 - B 80 3.15 270 10.63 190 7.48 3442 333 20.32 SC 1500 - 080 - B - N ~4,81 ~10.62
( )
SC 1500 - 100 - B 100 3.94 310 12.20 210 8.27 400 24.41 SC 1500 - 100 - B - N ~5,22 ~11.52
5%
SC 1500 - 125 - B 125 4.92 360 14.17 235 9.25 +20 C +68F 483 29.47 SC 1500 - 125 - B - N ~5,75 ~12.69
SC 1500 - 160 - B 160 6.3 430 16.93 270 10.63 599 36.55 SC 1500 - 160 - B - N ~6,33 ~13.97
SC 1500 - 200 - B 200 7.87 510 20.08 310 12.20 731 44.61 SC 1500 - 200 - B - N ~7,34 ~16.20
SC 1500 - 250 - B 250 9.84 610 24.02 360 14.17 897 54.74 SC 1500 - 250 - B - N ~8,50 ~18.76
SC 1500 - 300 - B 300 11.81 710 27.95 410 16.14 1063 64.87 SC 1500 - 300 - B - N ~9,60 ~21.19
Info pg. 185
Special Springs 84
SC 3000
ISO 11901 Standard ISO 11901
VDI 3003
CNOMO E24.54815.N
5,5
G 1/8"
.22
M8 x 13 (4x)
Force (daN)
50
1.97
M8
Ra < 0,05
HV ~ 1000 60
Cu
2.36
2945
.12
3
Cu (mm)
21
.83
R 2,5
(Cycles x millions)
3.54 .1
L min
(Cycles / min)
87
3.43
.2
5
10,5
95 0,3
.31
.41
+ 1,0
Technical specifications
SC 3000 - 025 - B 25 0.98 170 6.69 145 5.71 274 16.72 SC 3000 - 025 - B - N ~6,36 ~13.95
SC 3000 - 038 - B 38 1.50 196 7.72 158 6.22 346 21.11 SC 3000 - 038 - B - N ~6,75 ~14.90
SC 3000 - 050 - B 50 1.97 220 8.66 170 6.69 413 25.20 SC 3000 - 050 - B - N ~7,35 ~16.22
SC 3000 - 063 - B 63 2.48 247 9.72 183,5 7.22 2945 488 29.78 SC 3000 - 063 - B - N ~7,87 ~17.37
SC 3000 - 080 - B 80 3.15 280 11.02 200 7.87 6626 579 35.33 SC 3000 - 080 - B - N ~8,44 ~18.63
( )
SC 3000 - 100 - B 100 3.94 320 12.6 220 8.66 691 42.16 SC 3000 - 100 - B - N ~9,03 ~19.93
5%
SC 3000 - 125 - B 125 4.92 370 14.57 245 9.64 +20 C +68F 829 50.59 SC 3000 - 125 - B - N ~10,1 ~22.29
SC 3000 - 160 - B 160 6.3 440 17.32 280 11.02 1024 62.49 SC 3000 - 160 - B - N ~11,3 ~24.94
SC 3000 - 200 - B 200 7.87 520 20.47 320 12.60 1246 76.04 SC 3000 - 200 - B - N ~12,8 ~28.26
SC 3000 - 250 - B 250 9.84 620 24.41 370 14.57 1524 93.00 SC 3000 - 250 - B - N ~14,5 ~32.00
SC 3000 - 300 - B 300 11.81 720 28.35 420 16.54 1801 109.90 SC 3000 - 300 - B - N ~16,2 ~35.76
Info pg. 185
Special Springs 85
SC 5000
ISO 11901 ISO 11901 Standard
VDI 3003
CNOMO E24.54815.N
9500
5,5
G 1/8"
.22
9000
8500
M10 x 16 (4x)
Force (daN)
8000
65
7500
2.56
M8 7000
HV ~ 1000 80
6000
Cu
5500
3.15
4980
.12
3
Cu (mm)
22,5
.89
R 2,5
(Cycles x millions)
.1
4.53
L min
(Cycles / min)
112
4.41
.2
5
10,5
120 0,3
.31
.41
Technical specifications
SC 5000 - 025 - B 25 0.98 190 7.48 165 6.50 446 27.22 SC 5000 - 025 - B - N ~12,2 ~26.93
SC 5000 - 038 - B 38 1.50 216 8.50 178 7.01 559 34.11 SC 5000 - 038 - B - N ~12,9 ~28.48
SC 5000 - 050 - B 50 1.97 240 9.45 190 7.48 663 40.46 SC 5000 - 050 - B - N ~13,7 ~30.24
SC 5000 - 063 - B 63 2.48 267 10.51 203,5 8.01 4980 780 47.60 SC 5000 - 063 - B - N ~14,5 ~32.00
SC 5000 - 080 - B 80 3.15 300 11.81 220 8.66 11205 924 56.39 SC 5000 - 080 - B - N ~15,4 ~33.99
( )
SC 5000 - 100 - B 100 3.94 340 13.39 240 9.45 1097 66.94 SC 5000 - 100 - B - N ~16,7 ~36.86
5%
SC 5000 - 125 - B 125 4.92 390 15.35 265 10.43 +20 C +68F 1314 80.19 SC 5000 - 125 - B - N ~18,3 ~40.40
SC 5000 - 160 - B 160 6.30 460 18.11 300 11.81 1618 98.74 SC 5000 - 160 - B - N ~20,1 ~44.37
SC 5000 - 200 - B 200 7.87 540 21.26 340 13.39 1965 119.91 SC 5000 - 200 - B - N ~22,3 ~49.22
SC 5000 - 250 - B 250 9.84 640 25.20 390 15.35 2399 146.40 SC 5000 - 250 - B - N ~24,8 ~54.75
SC 5000 - 300 - B 300 11.81 740 29.13 440 17.32 2833 172.88 SC 5000 - 300 - B - N ~27,3 ~60.26
Info pg. 185
Special Springs 86
SC 7500
ISO 11901 Standard ISO 11901
VDI 3003
CNOMO E24.54815.N
13500
5,5
G 1/8"
.22
12500
M10 x 16 (4x)
Force (daN)
80 11500
3.15
M16 x 2 10500
3.94
7540
.12
3
Cu (mm)
24,5
.96
R 2,5
(Cycles x millions)
5.7 .1
L min
(Cycles / min)
142
5.59
.28
7
10,5
150 0,3
.31
.41
Technical specifications
SC 7500 - 025 - B 25 0.98 205 8.07 180 7.09 760 46.38 SC 7500 - 025 - B - N ~19,8 ~43.70
SC 7500 - 038 - B 38 1.50 231 9.09 193 7.60 933 56.94 SC 7500 - 038 - B - N ~21,0 ~46.35
SC 7500 - 050 - B 50 1.97 255 10.04 205 8.07 1093 66.70 SC 7500 - 050 - B - N ~21,8 ~48.12
SC 7500 - 063 - B 63 2.48 282 11.10 218,5 8.60 7540 1275 77.81 SC 7500 - 063 - B - N ~22,6 ~49.89
SC 7500 - 080 - B 80 3.15 315 12.40 235 9.25 16875 1493 91.11 SC 7500 - 080 - B - N ~24,4 ~53.86
( )
SC 7500 - 100 - B 100 3.94 355 13.98 255 10.04 1759 107.34 SC 7500 - 100 - B - N ~26,1 ~57.61
5%
SC 7500 - 125 - B 125 4.92 405 14.94 280 11.02 +20 C +68F 2091 127.60 SC 7500 - 125 - B - N ~28,0 ~61.81
SC 7500 - 160 - B 160 6.30 475 18.70 315 12.40 2557 156.00 SC 7500 - 160 - B - N ~31,4 ~69.31
SC 7500 - 200 - B 200 7.87 555 21.85 355 13.98 3090 188.75 SC 7500 - 200 - B - N ~35,0 ~77.26
SC 7500 - 250 - B 250 9.84 655 25.79 405 15.94 3755 229.15 SC 7500 - 250 -B - N ~38,5 ~84.99
SC 7500 - 300 - B 300 11.81 755 29.72 455 17.91 4421 269.79 SC 7500 - 300 - B - N ~42,4 ~93.60
Info pg. 185
Special Springs 87
SC 10000
ISO 11901 ISO 11901 Standard
VDI 3003
CNOMO E24.54815.N
5,5
G 1/8"
.22
M12 x 16 (4x)
Force (daN)
95
3.74
M16 x 2
Ra < 0,05
HV ~ 1000 120
Cu
4.72
.12
3
Cu (mm)
30,5
1.2
R 2,5
.01
(Cycles x millions)
7.48 .1
L min
(Cycles / min)
187
7.36
.31
8
10,5
.31
195 0,3
8
.41
Technical specifications
SC 10000 - 025 - C 25 0.98 210 8.27 185 7.28 1009 61.57 SC 10000 - 025 - C - N ~34,8 ~76.8
SC 10000 - 038 - C 38 1.50 236 9.29 198 7.79 1307 79.76 SC 10000 - 038 - C - N ~36,7 ~81.0
SC 10000 - 050 - C 50 1.97 260 10.23 210 8.27 1582 96.54 SC 10000 - 050 - C - N ~38,5 ~85.0
SC 10000 - 063 - C 63 2.48 287 11.30 223,5 8.80 10600 1881 114.79 SC 10000 - 063 - C - N ~40,5 ~89.4
SC 10000 - 080 - C 80 3.15 320 12.60 240 9.45 23830 2270 138.52 SC 10000 - 080 - C - N ~43,0 ~94.9
( )
SC 10000 - 100 - C 100 3.94 360 14.17 260 10.24 2729 166.53 SC 10000 - 100 - C - N ~46,0 ~101.5
5%
SC 10000 - 125 - C 125 4.92 410 16.14 285 11.22 +20 C +68F 3302 201.50 SC 10000 - 125 - C - N ~49,8 ~109.9
SC 10000 - 160 - C 160 6.30 480 18.90 320 12.60 4105 250.50 SC 10000 - 160 - C - N ~55,0 ~121.4
SC 10000 - 200 - C 200 7.87 560 22.05 360 14.17 5022 306.46 SC 10000 - 200 - C - N ~61,0 ~134.6
SC 10000 - 250 - C 250 9.84 660 25.98 410 16.14 6169 376.46 SC 10000 - 250 - C - N ~68,5 ~151.2
SC 10000 - 300 - C 300 11.81 760 29.92 460 18.11 6657 406.24 SC 10000 - 300 - C - N ~76,0 ~167.7
Info pg. 185
Special Springs 88
SC
SCF
Special Springs 89
H SERIES
ISO Standard, high force - ISO Standard, fuerza potenciada
Permanent
Lubrication
on the
Rod
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
H 300 1.26 32 10 - 125 0.39 - 4.92 300 675 - - -
H 500 1.50 38 10 - 125 0.39 - 4.92 470 1058 - - -
HF 500 - M 38 X 1,5 10 - 125 0.39 - 4.92 470 1058 - - -
H 700 1.77 45 13 - 160 0.51 - 6.30 680 1530 - - -
HF 700 - M 45 X 1,5 13 - 160 0.51 - 6.30 680 1530 - - -
H 1000 1.97 50 13 - 300 0.51 - 11.81 1060 2385 - - -
HF 1000 - M 50 X 1,5 13 - 300 0.51 - 11.81 1060 2385 - - -
H 2400 2.95 75 25 - 300 0.98 - 11.81 2385 5366 - - -
H 4200 3.74 95 25 - 300 0.98 - 11.81 4240 9540 - - -
H 6600 4.72 120 25 - 300 0.98 - 11.81 6630 14920 - - -
H 18500 7.68 195 25 - 300 0.98 - 11.81 18400 41440 - - -
Special Springs 90
H 300
ISO Standard, high force - ISO Standard, fuerza potenciada
M8 x 6
Force (daN)
16
0.63
M6
Ra < 0,05
HV ~ 1000
Cu
.08
2
C
Cu (mm)
30 on
10,5
.41
R1
.01
(Cycles x millions)
.04
1.18
(Cycles / min)
L min
H cti
27
0-
3,5
1.06
.14
by du
32 0,3
.16
4
(10) H 300-050-B H
Body
+ 1,0
+ 0,5 Body
+ 1,0
+ 0,5
+ .04
HF
+ .04
ed pr
+ .02
+ .02
Drop-ln Bottom mount FS2 32 FC 32 A
Technical specifications
pl t o
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
re ou
( )
H 300 - 050 - B 50 1.97 150 5.91 100 3.94 - - - ~0,43 ~0.95
5%
H 300 - 063 - B 63 2.48 177 6.97 113,5 4.47 +20 C +68F - - - ~0,48 ~1.06
H 300 - 080 - B 80 3.15 210 8.27 130 5.12 - - - ~0,54 ~1.19
H 300 - 100 - B 100 3.94 250 9.84 150 5.91 - - - ~0,61 ~1.35
H 300 - 125 - B 125 4.92 300 11.81 175 6.89 - - - ~0,69 ~1.52
Special Springs 91
H 300
ISO Standard, high force - ISO Standard, fuerza potenciada
3,6
M6
.14
Force (daN)
M6 x 8 (2x)
16
0.63
M6
Ra < 0,05
HV ~ 1000 18
71
Cu
.08
2
Cu (mm)
10,5
.41
R1
.01
(Cycles x millions)
.04
1.18
(Cycles / min)
L min
27
3,5
1.06
.14
.24
.16
32 0,3
4
6
(10) H 300-050-C-N
+ 1,0
+ 1,0
Body + 0,5 Body + 0,5
+ .04
+ .04 + .02
+ .02
Drop-ln Bottom mount FS2A 32 FC 32 A FSA 32
Technical specifications
H 300 - 010 - C 10 0.39 70 2.76 60 2.36 6,6 0.40 H 300 - 010 - C - N ~0,29 ~0.64
H 300 - 013 - C 13 0.51 75,7 2.98 62,7 2.47 8,2 0.50 H 300 - 013 - C - N ~0,30 ~0.66
H 300 - 016 - C 16 0.63 82 3.23 66 2.60 9,9 0.60 H 300 - 016 - C - N ~0,31 ~0.68
H 300 - 025 - C 25 0.98 100 3.94 75 2.95 300 15 0.92 H 300 - 025 - C - N ~0,34 ~0.75
H 300 - 038 - C 38 1.50 126 4.96 88 3.46 675 22,2 1.35 H 300 - 038 - C - N ~0,38 ~0.85
( )
H 300 - 050 - C 50 1.97 150 5.91 100 3.94 28,9 1.76 H 300 - 050 - C - N ~0,43 ~0.95
5%
H 300 - 063 - C 63 2.48 176,5 6.95 113,5 4.47 +20 C +68F 36,2 2.21 H 300 - 063 - C - N ~0,48 ~1.06
H 300 - 080 - C 80 3.15 210 8.27 130 5.12 45,7 2.79 H 300 - 080 - C - N ~0,54 ~1.19
H 300 - 100 - C 100 3.94 250 9.84 150 5.91 56,9 3.47 H 300 - 100 - C - N ~0,61 ~1.35
H 300 - 125 - C 125 4.92 300 11.81 175 6.89 70,9 4.33 H 300 - 125 - C - N ~0,69 ~1.52
Info pg. 185
Special Springs 92
H 500
ISO Standard, high force - ISO Standard, fuerza potenciada
M8 x 6
Force (daN)
20
.79
M6
Ra < 0,05
HV ~ 1000
Cu
.08
2
C
Cu (mm)
50 on
10,5
.41
R1
(Cycles x millions)
1.42 .04
(Cycles / min)
L min
H cti
33
0-
3,5
1.30
.14
by du
38 0,3
.16
4
(10) H 500-050-B H
Body
+ 1,0
+ 0,5 Body
+ 1,0
+ 0,5 HF
+ .04
+ .04
FC 38 A
ed pr
+ .02
+ .02
Drop-ln Bottom mount FS2 38 FCQ 38 A
Technical specifications
pl t o
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
re ou
( )
H 500 - 050 - B 50 1.97 150 5.9 100 3.94 - - - ~0,63 ~1.39
5%
H 500 - 063 - B 63 2.48 177 6.97 113,5 4.47 +20 C +68F - - - ~0,70 ~1.55
H 500 - 080 - B 80 3.15 210 8.27 130 5.12 - - - ~0,79 ~1.74
H 500 - 100 - B 100 3.94 250 9.84 150 5.91 - - - ~0,89 ~1.96
H 500 - 125 - B 125 4.92 300 11.81 175 6.89 - - - ~1,08 ~2.40
Special Springs 93
H 500
ISO Standard, high force - ISO Standard, fuerza potenciada
3,6
.14
M6
M6 x 8 (2x)
M6 x 8 (2x)
Force (daN)
20
45
.79
M6
25
8
Ra < 0,05
.9
HV ~ 1000 18
.71
Cu
.08
2
Cu (mm)
10,5
.41
R1
.01
(Cycles x millions)
1.42 .04
(Cycles / min)
L min
33
3,5
1.30
.14
38 0,3
.24
.16
6
(10) H 500-050-C - N
+ 1,0
+ 1,0
Body + 0,5
Body + 0,5 + .04
+ .04
+ .02
+ .02 FC 38 A
Drop-ln Bottom mount FS2A 38 FCQ 38 A FSA 38
Technical specifications
H 500 - 010 - C 10 0.39 70 2.76 60 2.36 8,7 0.53 H 500 - 010 - C - N ~0,42 ~0.93
H 500 - 013 - C 13 0.51 75,7 2.98 62,7 2.47 10,9 0.67 H 500 - 013 - C - N ~0,43 ~0.95
H 500 - 016 - C 16 0.63 82 3.23 66 2.60 13,1 0.80 H 500 - 016 - C - N ~0,45 ~0.99
H 500 - 019 - C 19 0.75 88 3.46 69 2.72 470 16,2 0.99 H 500 - 019 - C - N ~0,48 ~1.06
H 500 - 025 - C 25 0.98 100 3.94 75 2.95 1058 19,7 1.20 H 500 - 025 - C - N ~0,50 ~1.10
1.50 4.96 3.46 1.79 ~1.24
( )
H 500 - 038 - C 38 126 88 29,3 H 500 - 038 - C - N ~0,56
5%
H 500 - 050 - C 50 1.97 150 5.9 100 3.94 38,1 2.33 H 500 - 050 - C - N ~0,63 ~1.39
+20 C +68F
H 500 - 063 - C 63 2.48 176,5 6.95 113,5 4.47 47,6 2.90 H 500 - 063 - C - N ~0,70 ~1.55
H 500 - 080 - C 80 3.15 210 8.27 130 5.12 60,1 3.67 H 500 - 080 - C - N ~0,79 ~1.74
H 500 - 100 - C 100 3.94 250 9.84 150 5.91 74,6 4.55 H 500 - 100 - C - N ~0,89 ~1.96
H 500 - 125 - C 125 4.92 300 11.81 175 6.89 93,2 5.69 H 500 - 125 - C - N ~1,08 ~2.40
Info pg. 185
Special Springs 94
HF 500
threaded
ISO Standard, high force - ISO Standard, fuerza potenciada
3,6 .14
20 M6
Force (daN)
.79
M6
Ra < 0,05
HV ~ 1000
Cu
4,1
.16
.08
2,8
.11
5
.2
Cu (mm)
L 0,25
.01
(Cycles x millions)
(Cycles / min)
14
.55
35,7
2,5
.10
.27
1.40
7
M 38 x 1,5
Cu (mm)
Fixings
(10) HF 500-050-C
H
(10) HF 500-050-C-N Body
+ 1,0
+ 0,5
+ .04
HF
+ .02
FCA 38 GM 38
Technical specifications
HF 500 - 010 - C 10 0.39 70 2.76 60 2.36 8,7 0.53 HF 500 - 010 - C - N ~0,39 ~0.86
HF 500 - 013 - C 13 0.51 75,7 2.98 62,7 2.47 10,9 0.67 HF 500 - 013 - C - N ~0,40 ~0.88
HF 500 - 016 - C 16 0.63 82 3.23 66 2.60 13,1 0.80 HF 500 - 016 - C - N ~0,42 ~0.92
HF 500 - 019 - C 19 0.75 88 3.46 69 2.72 470 16,2 0.99 HF 500 - 019 - C - N ~0,45 ~0.99
HF 500 - 025 - C 25 0.98 100 3.94 75 2.95 1058 19,7 1.20 HF 500 - 025 - C - N ~0,48 ~1.06
1.50 4.96 3.46 1.79
( )
HF 500 - 038 - C 38 126 88 29,3 HF 500 - 038 - C - N ~0,54 ~1.19
5%
HF 500 - 050 - C 50 1.97 150 5.9 100 3.94 38,1 2.33 HF 500 - 050 - C - N ~0,59 ~1.30
+20 C +68F
HF 500 - 063 - C 63 2.48 176,5 6.95 113,5 4.47 47,6 2.90 HF 500 - 063 - C - N ~0,66 ~1.45
HF 500 - 080 - C 80 3.15 210 8.27 130 5.12 60,1 3.67 HF 500 - 080 - C - N ~0,76 ~1.67
HF 500 - 100 - C 100 3.94 250 9.84 150 5.91 74,6 4.55 HF 500 - 100 - C - N ~0,85 ~1.87
HF 500 - 125 - C 125 4.92 300 11.81 175 6.89 93,2 5.69 HF 500 - 125 - C - N ~1,05 ~2.31
Info pg. 185
Special Springs 95
H 700
ISO Standard, high force - ISO Standard, fuerza potenciada
5,5
.22
G1/8
Force (daN)
M8 x 13 (2x)
24
.94
M8
Ra < 0,05
HV ~ 1000 20
.79
Cu
.08
2
Cu (mm)
14,5
.57
(Cycles x millions)
1.69 .04
(Cycles / min)
L min
40
1.57
3,5
.14
10,5
45 0,3
.16
.41
(10) H 700-050-A-N
+ 1,0
+ 1,0
Body + 0,5
Body + 0,5 + .04
+ .04
+ .02
Bottom mount FS2 45 + .02 FC 45 A
Drop-ln FB 45 - FBA 45 FS2A 45 FCQ 45 A FSA 45
Technical specifications
H 700 - 013 - A 13 0.51 110,4 4.35 97,7 3.85 31 1.89 H 700 - 013 - A - N ~0,98 ~2.16
H 700 - 025 - A 25 0.98 135 5.31 110 4.33 46 2.81 H 700 - 025 - A - N ~1,07 ~2.36
H 700 - 038 - A 38 1.50 161 6.34 123 4.84 680 62 3.78 H 700 - 038 - A - N ~1,16 ~2.56
H 700 - 050 - A 50 1.97 185 7.28 135 5.31 1530
76 4.64 H 700 - 050 - A - N ~1,25 ~2.76
H 700 - 063 - A 63 2.48 212 8.35 148,5 5.85 93 5.68 H 700 - 063 - A - N ~1,35 ~2.98
H 700 - 080 - A
H 700 - 100 - A
80
100
3.15
3.94
245 9.65 165
285 11.22 185
6.50
7.28
( 5%
+20 C +68F ) 113
137
6.90
8.36
H 700 - 080 - A - N
H 700 - 100 - A - N
~1,47
~1,72
~3.25
~3.8
H 700 - 125 - A 125 4.92 335 13.19 210 8.27 167 10.19 H 700 - 125 - A - N ~1,80 ~3.97
H 700 - 160 - A 160 6.30 405 15.94 245 9.65 210 12.82 H 700 - 160 - A - N ~2,05 ~4.52
Special Springs 96
HF 700
threaded
ISO Standard, high force - ISO Standard, fuerza potenciada
5,5
.22
24 G1/8
Force (daN)
.94
M8
Ra < 0,05
HV ~ 1000
Cu
4,1
2,8
.16
.08
.11
5
.2
Cu (mm)
L 0,25
.01
(Cycles x millions)
(Cycles / min)
8
.31
42,7
10,5
2,8
.11
.27
1.68
M 45 x 1,5
Cu (mm)
Fixings
(10) HF 700-050-A
H
(10) HF 700-050-A-N Body
+ 1,0
+ 0,5
HF
+ .04
+ .02
FCA 45 GM 45
Technical specifications
HF 700 - 013 - A 13 0.51 110,4 4.35 97,7 3.85 31 1.89 HF 700 - 013 - A - N ~0,92 ~2.02
HF 700 - 025 - A 25 0.98 135 5.31 110 4.33 46 2.81 HF 700 - 025 - A - N ~1,03 ~2.27
HF 700 - 038 - A 38 1.50 161 6.34 123 4.84 680 62 3.78 HF 700 - 038 - A - N ~1,13 ~2.49
HF 700 - 050 - A 50 1.97 185 7.28 135 5.31 1530
76 4.64 HF 700 - 050 - A - N ~1,24 ~2.73
HF 700 - 063 - A 63 2.48 212 8.35 148,5 5.85 93 5.68 HF 700 - 063 - A - N ~1,33 ~2.93
HF 700 - 080 - A
HF 700 - 100 - A
80
100
3.15
3.94
245 9.65 165
285 11.22 185
6.50
7.28
( 5%
+20 C +68F ) 113
137
6.90
8.36
HF 700 - 080 - A - N
HF 700 - 100 - A - N
~1,46
~1,70
~3.21
~3.74
HF 700 - 125 - A 125 4.92 335 13.19 210 8.27 167 10.19 HF 700 - 125 - A - N ~1,78 ~3.92
HF 700 - 160 - A 160 6.30 405 15.94 245 9.65 210 12.82 HF 700 - 160 - A - N ~1,92 ~4.22
Info pg. 185
Special Springs 97
H 1000
ISO Standard, high force - ISO Standard, fuerza potenciada
5,5
G 1/8"
.22
Force (daN)
M8 x 13 (2x)
30
1.18
M8
Ra < 0,05
HV ~ 1000 20
Cu
.79
.12
3
Cu (mm)
14,5
.57
R2
.01
(Cycles x millions)
1.81
(Cycles / min)
L min
43
1.69
.2
5
10,5
.41
50 0,3
.31
8
(10) H 1000-050-A-N
+ 1,0
+ 1,0 Body + 0,5
Body + 0,5
+ .04 Bottom mount FS2 50 + .04
+ .02 FC 50 A
+ .02
Drop-ln FB 50 - FBA 50 FS2A 50 FCQ 50 A FSA 50
Technical specifications
H 1000 - 013 - A 13 0.51 120,4 4.74 107,7 4.24 52 3.17 H 1000 - 013 - A - N ~1,35 ~2.98
H 1000 - 025 - A 25 0.98 145 5.71 120 4.72 72 4.39 H 1000 - 025 - A - N ~1,44 ~3.18
H 1000 - 038 - A 38 1.50 171 6.73 133 5.24 93 5.68 H 1000 - 038 - A - N ~1,59 ~3.51
H 1000 - 050 - A 50 1.97 195 7.68 145 5.71 113 6.90 H 1000 - 050 - A - N ~1,68 ~3.71
H 1000 - 063 - A 63 2.48 222 8.74 158,5 6.24 1060 135 8.24 H 1000 - 063 - A - N ~1,83 ~4.04
H 1000 - 080 - A 80 3.15 255 10.04 175 6.89 2385 162 9.89 H 1000 - 080 - A - N ~1,99 ~4.39
( )
H 1000 - 100 - A 100 3.94 295 11.61 195 7.68 195 11.90 H 1000 - 100 - A - N ~2,19 ~4.83
5%
H 1000 - 125 - A 125 4.92 345 13.58 220 8.66 236 14.40 H 1000 - 125 - A - N ~2,43 ~5.36
+20 C +68F
H 1000 - 160 - A 160 6.30 415 16.34 255 10.04 293 17.88 H 1000 - 160 - A - N ~2,77 ~6.11
H 1000 - 200 - A 200 7.87 495 19.49 295 11.61 359 21.91 H 1000 - 200 - A - N ~3,16 ~6.98
H 1000 - 250 - A 250 9.84 595 23.43 345 13.58 440 26.85 H 1000 - 250 - A - N ~3,64 ~8.04
H 1000 - 300 - A 300 11.81 695 27.36 395 15.55 522 31.85 H 1000 - 300 - A - N ~4,13 ~9.12
Info pg. 185
Special Springs 98
HF 1000
threaded
ISO Standard, high force - ISO Standard, fuerza potenciada
6
.24
30
G1/8
1.18
Force (daN)
M8
Ra < 0,05
HV ~ 1000
Cu
4,1
2,8
.11
.12
3
.16
.2
5
Cu (mm)
L 0,25
.01
(Cycles / min)
.31
8
10,5
47,7
2,8
.11
.27
1.88
M 50 x 1,5
Cu (mm)
Fixings
(10) HF 1000-050-A
H
(10) HF 1000-050-A-N Body
+ 1,0
+ 0,5
HF
+ .04
+ .02
FCA 50 GM 50
Technical specifications
HF 1000 - 013 - A 13 0.51 120,4 4.74 107,7 4.24 52 3.17 HF 1000 - 013 - A - N ~1,24 ~2.73
HF 1000 - 025 - A 25 0.98 145 5.71 120 4.72 72 4.39 HF 1000 - 025 - A - N ~1,35 ~2.97
HF 1000 - 038 - A 38 1.50 171 6.73 133 5.24 93 5.68 HF 1000 - 038 - A - N ~1,41 ~3.10
HF 1000 - 050 - A 50 1.97 195 7.68 145 5.71 113 6.90 HF 1000 - 050 - A - N ~1,59 ~3.50
HF 1000 - 063 - A 63 2.48 222 8.74 158,5 6.24 1060 135 8.24 HF 1000 - 063 - A - N ~1,72 ~3.78
HF 1000 - 080 - A 80 3.15 255 10.04 175 6.89 2385 162 9.89 HF 1000 - 080 - A - N ~1,89 ~4.16
( )
HF 1000 - 100 - A 100 3.94 295 11.61 195 7.68 195 11.90 HF 1000 - 100 - A - N ~2,15 ~4.73
5%
HF 1000 - 125 - A 125 4.92 345 13.58 220 8.66 236 14.40 HF 1000 - 125 - A - N ~2,40 ~5.28
+20 C +68F
HF 1000 - 160 - A 160 6.30 415 16.34 255 10.04 293 17.88 HF 1000 - 160 - A - N ~2,63 ~5.79
HF 1000 - 200 - A 200 7.87 495 19.49 295 11.61 359 21.91 HF 1000 - 200 - A - N ~3,09 ~6.80
HF 1000 - 250 - A 250 9.84 595 23.43 345 13.58 440 26.85 HF 1000 - 250 - A - N ~3,60 ~7.92
HF 1000 - 300 - A 300 11.81 695 27.36 395 15.55 522 31.85 HF 1000 - 300 - A - N ~4,08 ~8.98
Info pg. 185
Special Springs 99
H 2400
ISO Standard, high force - ISO Standard, fuerza potenciada
5385
5,5
G 1/8"
.22
4885
M8 x 13 (4x)
Force (daN)
4385
45
3885
1.77
M8
Ra < 0,05 3385
HV ~ 1000 40 2885
1.57
Cu
2385
.12
3
Cu (mm)
.71
18
R 2,5
.01
(Cycles x millions)
2.76 .1
(Cycles / min)
L min
67
2.64
.2
5
10,5
.31
75 0,3
.41
(10) H 2400-050-A-N
+ 1,0
+ 1,0 Body + 0,5
Body + 0,5
+ .04 Bottom mount FS2 75 + .04
+ .02 FC 75 A
+ .02
Drop-ln FB 75 - FBA 75 FS2A 75 FCQ 75 A FSA 75
Technical specifications
H 2400 - 025 - A 25 0.98 160 6.30 135 5.31 174 10.62 H 2400 - 025 - A - N ~3,70 ~8.14
H 2400 - 038 - A 38 1.50 186 7.32 148 5.83 222 13.55 H 2400 - 038 - A - N ~3,96 ~8.71
H 2400 - 050 - A 50 1.97 210 8.27 160 6.30 266 16.23 H 2400 - 050 - A - N ~4,21 ~9.26
H 2400 - 063 - A 63 2.48 237 9.33 173,5 6.83 316 19.28 H 2400 - 063 - A - N ~4,50 ~9.90
2385
H 2400 - 080 - A 80 3.15 270 10.63 190 7.48 377 23.01 H 2400 - 080 - A - N ~4,81 ~10.58
H 2400 - 100 - A 100 3.94 310 12.20 210 8.27 5362 451 27.52 H 2400 - 100 - A - N ~5,23 ~11.51
( )
H 2400 - 125 - A 125 4.92 360 14.17 235 9.25 5% 543 33.14 H 2400 - 125 - A - N ~5,67 ~12.47
H 2400 - 160 - A 160 6.30 430 16.93 270 10.63 +20 C +68F 672 41.01 H 2400 - 160 - A - N ~6,48 ~14.26
H 2400 - 200 - A 200 7.87 510 20.08 310 12.20 819 49.98 H 2400 - 200 - A - N ~7,49 ~16.48
H 2400 - 250 - A 250 9.84 610 24.02 360 14.17 1003 61.21 H 2400 - 250 - A - N ~9,39 ~20.65
H 2400 - 300 - A 300 11.81 710 27.95 410 16.14 1187 72.44 H 2400 - 300 - A - N ~11,23 ~24.71
Info pg. 185
5,5
G 1/8"
.22
M8 x 13 (4x)
Force (daN)
60
2.36
M8
Ra < 0,05
HV ~ 1000
60
2.36
Cu
.12
3
Cu (mm)
21
.83
R 2,5
(Cycles x millions)
3.54 .1
(Cycles / min)
L min
87
3.43
.2
5
10,5
.31
95 0,3
.41
Technical specifications
H 4200 - 025 - A 25 0.98 170 6.69 145 5.71 310 18.92 H 4200 - 025 - A - N ~6,54 ~14.44
H 4200 - 038 - A 38 1.50 196 7.72 158 6.22 389 23.74 H 4200 - 038 - A - N ~7,00 ~15.45
H 4200 - 050 - A 50 1.97 220 8.66 170 6.69 462 28.19 H 4200 - 050 - A - N ~7,37 ~16.27
H 4200 - 063 - A 63 2.48 247 9.72 183,5 7.22 544 33.20 H 4200 - 063 - A - N ~7,84 ~17.31
H 4200 - 080 - A 80 3.15 280 11.02 200 7.87 4240 644 39.30 H 4200 - 080 - A - N ~8,35 ~18.43
H 4200 - 100 - A 100 3.94 320 12.60 220 8.66 9540 765 46.68 H 4200 - 100 - A - N ~9,30 ~20.53
( )
H 4200 - 125 - A 125 4.92 370 14.57 245 9.65 5% 916 55.90 H 4200 - 125 - A - N ~9,80 ~21.63
H 4200 - 160 - A 160 6.30 440 17.32 280 11.02 +20 C +68F 1128 68.84 H 4200 - 160 - A - N ~10,5 ~23.18
H 4200 - 200 - A 200 7.87 520 20.47 320 12.60 1371 83.66 H 4200 - 200 - A - N ~11,3 ~24.94
H 4200 - 250 - A 250 9.84 620 24.41 370 14.57 1674 104.0 H 4200 - 250 - A - N ~12,3 ~27.15
H 4200 - 300 - A 300 11.81 720 28.35 420 16.54 1974 120.46 H 4200 - 300 - A - N ~13,3 ~29.36
Info pg. 185
15630
5,5
G 1/8"
.22
14630
Force (daN)
12630
75 11630
2.95 10630
M8 Ra < 0,05
9630
HV ~ 1000
8630
80
7630
Cu
3.15
6630
.12
3
Cu (mm)
22,5
.89
R 2,5
.01
(Cycles x millions)
4.53 .1
(Cycles / min)
L min
112
4.41
.2
5
10,5
120 0,3
.31
.41
Technical specifications
H 6600 - 025 - A 25 0.98 190 7.48 165 6.50 476 29.05 H 6600 - 025 - A - N ~12,1 ~26.71
H 6600 - 038 - A 38 1.50 216 8.50 178 7.01 593 36.19 H 6600 - 038 - A - N ~13,7 ~30.24
H 6600 - 050 - A 50 1.97 240 9.45 190 7.48 702 42.84 H 6600 - 050 - A - N ~15,1 ~33.33
H 6600 - 063 - A 63 2.48 267 10.51 203,5 8.01 824 50.28 H 6600 - 063 - A - N ~15,5 ~34.22
H 6600 - 080 - A 80 3.15 300 11.81 220 8.66 6630 974 59.44 H 6600 - 080 - A - N ~16,1 ~35.54
H 6600 - 100 - A 100 3.94 340 13.39 240 9.45 14920 1155 70.48 H 6600 - 100 - A - N ~17,5 ~38.63
( )
H 6600 - 125 - A 125 4.92 390 15.35 265 10.43 5% 1381 84.27 H 6600 - 125 - A - N ~19,3 ~42.60
H 6600 - 160 - A 160 6.30 460 18.11 300 11.81 +20 C +68F 1698 103.62 H 6600 - 160 - A - N ~21,8 ~48.12
H 6600 - 200 - A 200 7.87 540 21.26 340 13.39 2060 125.71 H 6600 - 200 - A - N ~24,7 ~54.53
H 6600 - 250 - A 250 9.84 640 25.20 390 15.35 2512 153.29 H 6600 - 250 - A - N ~28,3 ~62.47
H 6600 - 300 - A 300 11.81 740 29.13 440 17.32 2969 181.18 H 6600 - 300 - A - N ~31,9 ~70.42
Info pg. 185
45400
5,5
.22
G 1/8" 42400
Force (daN)
36400
125 33400
120 24400
4.72 21400
Cu
18400
.12
3
Cu (mm)
30,5
1.2
(Cycles x millions)
.1
7.48
(Cycles / min)
L min
187
7.36
.31
8
10,5
.31
195 0,3
.41
Technical specifications
H 18500 - 025 - A 25 0.98 210 8.27 185 7.28 1658 101.18 H 18500 - 025 - A - N ~32,9 ~72.6
H 18500 - 038 - A 38 1.50 236 9.29 198 7.79 2018 123.15 H 18500 - 038 - A - N ~34,4 ~75.9
H 18500 - 050 - A 50 1.97 260 10.23 210 8.27 2351 143.47 H 18500 - 050 - A - N ~35,8 ~79.0
H 18500 - 063 - A 63 2.48 287 11.30 223,5 8.80 2725 166.29 H 18500 - 063 - A - N ~37,3 ~82.3
18400
H 18500 - 080 - A 80 3.15 320 12.60 240 9.45 3182 194.18 H 18500 - 080 - A - N ~38,8 ~85.6
H 18500 - 100 - A 100 3.94 360 14.17 260 10.24 41440 3736 227.99 H 18500 - 100 - A - N ~41,5 ~91.6
( )
H 18500 - 125 - A 125 4.92 410 16.14 285 11.22 5% 4429 270.28 H 18500 - 125 - A - N ~45,1 ~99.6
H 18500 - 160 - A 160 6.30 480 18.90 320 12.60 +20 C +68F 5399 329.47 H 18500 - 160 - A - N ~48,3 ~106.6
H 18500 - 200 - A 200 7.87 560 22.05 360 14.17 6507 397.08 H 18500 - 200 - A - N ~52,9 ~116.8
H 18500 - 250 - A 250 9.84 660 25.98 410 16.14 7893 481.66 H 18500 - 250 - A - N ~57,7 ~127.4
H 18500 - 300 - A 300 11.81 760 29.92 460 18.11 9278 566.18 H 18500 - 300 - A - N ~63,8 ~140.8
Info pg. 185
- 50 % - 55 %
vibrations noise
7,5
5,0 Final
2,5 F0 Force
0 F Cls
Force
-2,5
-5,0
LS series LS series
-7,5
Standard series Standard series
-10,0
-12,5 F0 0
-0,2 0 0,2 0,4 0,6 5 mm Stroke 100% Cu
Time [sec] Cls
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
LS 1500 75 2.95 25 - 300 0.98 - 11.81 1590 3577 - - -
LS 2400 75 2.95 25 - 300 0.98 - 11.81 2385 5366 - - -
LS 3000 95 3.74 25 - 300 0.98 - 11.81 2830 6374 - - -
LS 4200 95 3.74 25 - 300 0.98 - 11.81 4240 9540 - - -
5,5
.22
G 1/8"
M8 x 13 (4x)
Force (daN)
45
1.77
5 (Cls)
20
.79 Ra < 0,05
.20
HV ~ 1000 40
.12
Cu
1.57
3
.71
18
Cu (mm)
(Cycles x millions)
(Cycles / min)
67
2.64
.20
5
10,5
.31
75 0,3
.41
(10) LS 1500-050-A-N
+ 1,0
+ 1,0 Body + 0,5
Body + 0,5 + .04
+ .04
+ .02 Bottom mount FS2 75 + .02
FC 75 A
Drop-ln FB 75 - FBA 75 FS2A 75 FCQ 75 A FSA 75
LS
Max. Speed F C P max P min S X
Maintenance kit
32 0 100 bar 20 bar 15,9 cm2
1,8 m/s - - N2 Y
Z
39BMLS01500A
176 80 1450 psi 290 psi 2.464 in.2
Technical specifications
Code Cu L Lmin Fo F Cls Vo connecting
hole G1/8"
150 bar - 2175 psi 150 bar - 2175 psi
Jic 37 hose
mm inch mm inch mm inch daN / lb daN / lb cm3 in3 Minimess hose lb
LS 1500 - 025 - A 25 0.98 160 6.30 135 5.31 126 7.69 LS 1500 - 025 - A - N ~3.71
LS 1500 - 038 - A 38 1.50 186 7.32 148 5.83 174 10.62 LS 1500 - 038 - A - N ~3.79
LS 1500 - 050 - A 50 1.97 210 8.27 160 6.30 218 13.30 LS 1500 - 050 - A - N ~3.89
LS 1500 - 063 - A 63 2.48 237 9.33 173,5 6.83 0 1590 268 16.35 LS 1500 - 063 - A - N ~4.48
LS 1500 - 080 - A 80 3.15 270 10.63 190 7.48 329 20.08 LS 1500 - 080 - A - N ~4.73
0 3577
LS 1500 - 100 - A 100 3.94 310 12.20 210 8.27 403 24.59 LS 1500 - 100 - A - N ~4.89
LS 1500 - 125 - A
LS 1500 - 160 - A
125 4.92
160 6.30
360
430
14.17
16.93
235
270
9.25
10.63 ( 5%
+20 C +68F )( 5%
+20 C +68F ) 495
624
30.21
38.08
LS 1500 - 125 - A - N
LS 1500 - 160 - A - N
~5.57
~6.33
LS 1500 - 200 - A 200 7.87 510 20.08 310 12.20 771 47.05 LS 1500 - 200 - A - N ~7.19
LS 1500 - 250 - A 250 9.84 610 24.02 360 14.17 955 58.28 LS 1500 - 250 - A - N ~9.19
LS 1500 - 300 - A 300 11.81 710 27.95 410 16.14 1139 69.51 LS 1500 - 300 - A - N ~11.04
Info pg. 185
5385
5,5
.22
G 1/8"
4885
M8 x 13 (4x)
Force (daN)
4385
45
1.77
3885
5 (Cls)
20
.79 Ra < 0,05 3385
.20
HV ~ 1000
40 2885
.12
Cu
1.57
3
2385
18
.71
Cu (mm)
(Cycles x millions)
(Cycles / min)
67
2.64
.20
5
10,5
75 0,3
.31
.41
(10) LS 2400-050-A-N
+ 1,0
+ 1,0 Body + 0,5
Body + 0,5 + .04
+ .04
+ .02 Bottom mount FS2 75 + .02
FC 75 A
Drop-ln FB 75 - FBA 75 FS2A 75 FCQ 75 A FSA 75
Technical specifications
Code Cu L Lmin Fo F Cls Vo connecting
hole G1/8"
150 bar - 2175 psi 150 bar - 2175 psi
cm3 in3 Jic 37 hose
mm inch mm inch mm inch daN / lb daN / lb Minimess hose lb
LS 2400 - 025 - A 25 0.98 160 6.30 135 5.31 126 7.69 LS 2400 - 025 - A - N ~3,71
LS 2400 - 038 - A 38 1.50 186 7.32 148 5.83 174 10.62 LS 2400 - 038 - A - N ~3,79
LS 2400 - 050 - A 50 1.97 210 8.27 160 6.30 218 13.30 LS 2400 - 050 - A - N ~3,89
LS 2400 - 063 - A 63 2.48 237 9.33 173,5 6.83 0 2385 268 16.35 LS 2400 - 063 - A - N ~4,48
LS 2400 - 080 - A 80 3.15 270 10.63 190 7.48 329 20.08 LS 2400 - 080 - A - N ~4,73
0 5366
LS 2400 - 100 - A 100 3.94 310 12.20 210 8.27 403 24.59 LS 2400 - 100 - A - N ~4,89
LS 2400 - 125 - A
LS 2400 - 160 - A
125 4.92
160 6.30
360
430
14.17
16.93
235
270
9.25
10.63 ( 5%
+20 C +68F )( 5%
+20 C +68F )
495
624
30.21
38.08
LS 2400 - 125 - A - N
LS 2400 - 160 - A - N
~5,57
~6,33
LS 2400 - 200 - A 200 7.87 510 20.08 310 12.20 771 47.05 LS 2400 - 200 - A - N ~7,19
LS 2400 - 250 - A 250 9.84 610 24.02 360 14.17 955 58.28 LS 2400 - 250 - A - N ~9,19
LS 2400 - 300 - A 300 11.81 710 27.95 410 16.14 1139 69.51 LS 2400 - 300 - A - N ~11,04
Info pg. 185
5,5
.22
G 1/8"
M8 x 13 (4x)
Force (daN)
60
2.36
5 (Cls)
35
1.38 Ra < 0,05
.20
HV ~ 1000
60
2.36
.12
Cu
3
21
.83
Cu (mm)
(Cycles x millions)
(Cycles / min)
L min
87
.20
3.42
5
10,5
95 0,3
.31
.41
3.74 .01
Cu (mm)
Fixings
(10) LS 3000-050-A
(10) LS 3000-050-A-N
+ 1,0
+ 1,0 Body + 0,5
Body + 0,5 + .04
+ .04
+ .02 Bottom mount FS2 95 + .02
FC 95 A
Drop-ln FB 95 - FBA 95 FS2A 95 FCQ 95 A FSA 95
LS
Max. Speed F C P max P min S X
Maintenance kit
32 0 100 bar 20 bar 28,27 cm2
1,8 m/s - - N2 Y
Z
39BMLS03000A
176 80 1450 psi 290 psi 4.382 in.2
Technical specifications
Code Cu L Lmin Fo F Cls Vo connecting
hole G1/8"
150 bar - 2175 psi 150 bar - 2175 psi
cm3 in3 Jic 37 hose
mm inch mm inch mm inch daN / lb daN / lb Minimess hose lb
LS 3000 - 025 - A 25 0.98 170 6.69 145 5.71 195 11.90 LS 3000 - 025 - A - N ~5.69
LS 3000 - 038 - A 38 1.50 196 7.72 158 6.22 274 16.72 LS 3000 - 038 - A - N ~6.48
LS 3000 - 050 - A 50 1.97 220 8.66 170 6.69 347 21.18 LS 3000 - 050 - A - N ~6.77
LS 3000 - 063 - A 63 2.48 247 9.72 183,5 7.22 0 2830 429 26.18 LS 3000 - 063 - A - N ~6.84
LS 3000 - 080 - A 80 3.15 280 11.02 200 7.87 529 32.28 LS 3000 - 080 - A - N ~7.23
0 6374
LS 3000 - 100 - A 100 3.94 320 12.60 220 8.66 650 39.67 LS 3000 - 100 - A - N ~7.95
LS 3000 - 125 - A
LS 3000 - 160 - A
125 4.92
160 6.30
370
440
14.57
17.32
245
280
9.65
11.02 ( 5%
+20 C +68F )( 5%
+20 C +68F ) 801
1013
48.88
61.82
LS 3000 - 125 - A - N
LS 3000 - 160 - A - N
~9.58
~10.89
LS 3000 - 200 - A 200 7.87 520 20.47 320 12.60 1256 76.65 LS 3000 - 200 - A - N ~11.03
LS 3000 - 250 - A 250 9.84 620 24.41 370 14.57 1559 95.14 LS 3000 - 250 - A - N ~12.06
LS 3000 - 300 - A 300 11.81 720 28.35 420 16.54 1859 113.44 LS 3000 - 300 - A - N ~13.02
Info pg. 185
5,5
.22
G 1/8"
M8 x 13 (4x)
Force (daN)
60
2.36
5 (Cls)
35
1.38 Ra < 0,05
.20
HV ~ 1000
60
2.36
.12
Cu
3
21
.83
Cu (mm)
(Cycles x millions)
(Cycles / min)
L min
87
.20
3.42
5
10,5
95 0,3
.31
.41
3.74 .01
Cu (mm)
Fixings
(10) LS 4200-050-A
(10) LS 4200-050-A-N
+ 1,0
+ 1,0 Body + 0,5
Body + 0,5 + .04
+ .04
+ .02 Bottom mount FS2 95 + .02
FC 95 A
Drop-ln FB 95 - FBA 95 FS2A 95 FCQ 95 A FSA 95
Technical specifications
Code Cu L Lmin Fo F Cls Vo connecting
hole G1/8"
150 bar - 2175 psi 150 bar - 2175 psi
cm3 in3 Jic 37 hose
mm inch mm inch mm inch daN / lb daN / lb Minimess hose lb
LS 4200 - 025 - A 25 0.98 170 6.69 145 5.71 195 11.90 LS 4200 - 025 - A - N ~12.56
LS 4200 - 038 - A 38 1.50 196 7.72 158 6.22 274 16.72 LS 4200 - 038 - A - N ~14.30
LS 4200 - 050 - A 50 1.97 220 8.66 170 6.69 347 21.18 LS 4200 - 050 - A - N ~14.94
LS 4200 - 063 - A 63 2.48 247 9.72 183,5 7.22 0 4240 429 26.18 LS 4200 - 063 - A - N ~15.10
LS 4200 - 080 - A 80 3.15 280 11.02 200 7.87 529 32.28 LS 4200 - 080 - A - N ~15.96
0 9540
LS 4200 - 100 - A 100 3.94 320 12.60 220 8.66 650 39.67 LS 4200 - 100 - A - N ~17.55
LS 4200 - 125 - A
LS 4200 - 160 - A
125 4.92
160 6.30
370
440
14.57
17.32
245
280
9.65
11.02 ( 5%
+20 C +68F )( 5%
+20 C +68F ) 801
1013
48.88
61.82
LS 4200 - 125 - A - N
LS 4200 - 160 - A - N
~21.15
~24.04
LS 4200 - 200 - A 200 7.87 520 20.47 320 12.60 1256 76.65 LS 4200 - 200 - A - N ~24.35
LS 4200 - 250 - A 250 9.84 620 24.41 370 14.57 1559 95.14 LS 4200 - 250 - A - N ~26.62
LS 4200 - 300 - A 300 11.81 720 28.35 420 16.54 1859 113.44 LS 4200 - 300 - A - N ~28.74
Info pg. 185
Permanent
Lubrication
on the
Rod
Over
Pressure
Active
Safety
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
ML 300 25 0.98 10 - 80 0.39 - 3.15 310 698 - - -
ML 500 32 1.26 10 - 80 0.39 - 3.15 510 1149 - - -
ML 1000 38 1.50 10 - 80 0.39 - 3.15 980 2205 - -
ML 1000 N 38 1.50 10 - 80 0.39 - 3.15 980 2205 - -
ML 1800 50 1.97 15 - 80 0.59 - 3.15 1925 4335 - -
ML 1800 N 50 1.97 15 - 80 0.59 - 3.15 1925 4335 - -
ML 4700 75 2.95 15 - 80 0.59 - 3.15 4925 11081 - -
ML 4700 N 75 2.95 15 - 80 0.59 - 3.15 4925 11081 - -
ML 7500 95 3.74 15 - 80 0.59 - 3.15 7700 17325 - -
ML 7500 N 95 3.74 15 - 80 0.59 - 3.15 7700 17325 - -
ML 12000 120 4.72 15 - 80 0.59 - 3.15 12720 28620 - -
ML 12000 N 120 4.72 15 - 80 0.59 - 3.15 12720 28620 - -
660
610
Force (daN)
M4 x 7 (2x) 560
510
460
14
.55 410
Ra < 0,05 12
360
HV ~ 1000 .47
310
.08
Cu
Cu (mm)
(Cycles x millions)
.01
(Cycles / min)
L min
25 0,3 M6
.98 .01 Cu (mm)
Fixings
(10) ML300-050-B
+ 1,0
Body + 0,5
+ .04
+ .02
Drop-ln Bottom mount
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
Force (daN)
M5 x 7 (2x)
18
.71
Ra < 0,05 15
HV ~ 1000 .59
Cu
.08
2
Cu (mm)
(Cycles x millions)
.01
(Cycles / min)
L min
32 0,3 M6
1.26 .01 Cu (mm)
Fixings
(10) ML500-050-B
+ 1,0
Body + 0,5
+ .04
+ .02
Drop-ln Bottom mount FSA 32
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
Force (daN)
M6 x 7 (2x)
25
.98
Ra < 0,05 17
HV ~ 1000 .67
Cu
.08
2
Cu (mm)
(Cycles x millions)
.01
(Cycles / min)
L min
38 0,3 M6
1.50 .01 Cu (mm)
Fixings
(10) ML1000-050-B
+ 1,0
Body + 0,5
+ .04
+ .02
Drop-ln Bottom mount FSA 38
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
10,5
.67
.15
3,7
33
4
.16
1.3
38 0,3
1.5 .01
Special Springs 113
ML 1000N
linkable G1/8"
Maximum force, rod sealed -
Mxima fuerza, estanqueidad vstago
3,7
G1/8"
.15
M6 x 5
Force (daN)
25
.98 Ra < 0,05
HV ~ 1000 17
.67
.08
Cu
Cu (mm)
(Cycles x millions)
L min
(Cycles / min)
33
1.3
3,5
.14
10,5
.16
.41
38 0,3
4
(10) ML1000-050-B-N
+ 1,0
Body + 0,5
+ .04
+ .02
Drop-ln Bottom mount FS2A 38 FSA 38
Technical specifications
ML 1000 - 010 - B - N 10 0.39 95 3.74 85 3.35 18 1.10 ML 1000 - 010 - B - N ~0,56 ~1.23
ML 1000 - 015 - B - N 15 0.59 105 4.13 90 3.54 980 23 1.40 ML 1000 - 015 - B - N ~0,59 ~1.30
ML 1000 - 025 - B - N 25 0.98 125 4.92 100 3.94 2205
33 2.01 ML 1000 - 025 - B - N ~0,65 ~1.43
ML 1000 - 038 - B - N 38 1.50 155 6.10 117 4.61 48 2.93 ML 1000 - 038 - B - N ~0,74 ~1.63
ML 1000 - 050 - B - N
ML 1000 - 063 - B - N
50
63
1.97
2.48
180
225
7.09
8.86
130
162
5.12
6.38
( 5%
+20 C +68F ) 60
86
3.66
5.25
ML 1000 - 050 - B - N
ML 1000 - 063 - B - N
~0,82
~0,96
~1.81
~2.12
ML 1000 - 080 - B - N 80 3.15 260 10.24 180 7.09 103 6.29 ML 1000 - 080 - B - N ~1,03 ~2.27
Info pg. 185
Force (daN)
M6 x 8 (2x)
35
1.38
Ra < 0,05 26
1.02
HV ~ 1000
Cu
.12
3
Cu (mm)
(Cycles x millions)
.01
(Cycles / min)
L min
50 0,3 G1/8"
1.97 .01 Cu (mm)
Fixings
(10) ML1800-050-B
+ 1,0
Body + 0,5
+ .04
+ .02
Drop-ln Bottom mount FSA 50
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
G1/8"
FML 1800 new code: 39FML01800A
G1/8"
M6x8(4x)
5
2
1.02
10,5
26
.41
43
1.69
50 0,3
4,9
.19
1.97 .01
4,9
.19
G1/8"
M6 x 8 (4x)
Force (daN)
35
1.38
Ra < 0,05 26
HV ~ 1000 1.02
.12
Cu
Cu (mm)
(Cycles x millions)
L min
(Cycles / min)
43
1.69
.2
5
10,5
.31
.41
50 0,3
8
(10) ML1800-050-B-N
FS2 50
Drop-ln Bottom mount FS2A 50 FSA 50
Technical specifications
ML 1800 - 015 - B - N 15 0.59 115 4.52 100 3.94 49 2.99 ML 1800 - 015 - B - N ~1,14 ~2.51
1925
ML 1800 - 025 - B - N 25 0.98 135 5.31 110 4.33 67 4.09 ML 1800 - 025 - B - N ~1,22 ~2.68
ML 1800 - 038 - B - N 38 1.50 170 6.69 132 5.20 4335 102 6.22 ML 1800 - 038 - B - N ~1,41 ~3.10
ML 1800 - 050 - B - N
ML 1800 - 063 - B - N
ML 1800 - 080 - B - N
50
63
80
1.97
2.48
3.15
195
225
265
7.68
8.86
10.43
145
162
185
5.71
6.38
7.28
( 5%
+20 C +68F ) 125
154
193
7.63
9.40
11.78
ML 1800 - 050 - B - N
ML 1800 - 063 - B - N
ML 1800 - 080 - B - N
~1,52
~1,68
~1,87
~3.34
~3.70
~4.11
Info pg. 185
M8 x 8 (4x)
Force (daN)
56 40
2.20 Ra < 0,05
HV ~ 1000 1.57
Cu
.12
3
Cu (mm)
(Cycles x millions)
.01
(Cycles / min)
L min
75 0,3 G1/8"
2.95 .01 Cu (mm)
Fixings
(10) ML4700-050-B
+ 1,0
Body + 0,5
+ .04 Bottom mount
+ .02
Drop-ln FB 75 - FBA 75 FSA 75
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
.2
5
10,5
.41
.31
67
2.64
5,5
.22
75 0,3
2.95 .01
Special Springs 117
ML 4700N
linkable G1/8"
Maximum force, rod sealed -
Mxima fuerza, estanqueidad vstago
5,5
.22
G1/8"
M8 x 8 (4x)
Force (daN)
56
Ra < 0,05
2.20
HV ~ 1000 40
1.57
.12
Cu
Cu (mm)
(Cycles x millions)
L min
(Cycles / min)
67
2.64
.2
5
10,5
75 0,3
.41
.31
8
(10) ML4700-050-B-N
+ 1,0
Body + 0,5
+ .04
+ .02
Bottom mount FS2 75
Drop-ln FB 75 - FBA 75 FS2A 75 FSA 75
Technical specifications
ML 4700 - 015 - B - N 15 0.59 120 4.72 105 4.13 129 7.87 ML 4700 - 015 - B - N ~2,56 ~5.64
4925
ML 4700 - 025 - B - N 25 0.98 140 5.70 115 4.53 177 10.80 ML 4700 - 025 - B - N ~2,76 ~6.07
ML 4700 - 038 - B - N 38 1.50 170 6.69 132 5.20 11081 251 15.32 ML 4700 - 038 - B - N ~3,04 ~6.69
ML 4700 - 050 - B - N
ML 4700 - 063 - B - N
ML 4700 - 080 - B - N
50
63
80
1.97
2.48
3.15
200
230
270
7.87
9.06
10.63
150
167
190
5.91
6.57
7.48
( 5%
+20 C +68F ) 327
402
502
19.95
24.53
30.63
ML 4700 - 050 - B - N
ML 4700 - 063 - B - N
ML 4700 - 080 - B - N
~3,33
~3,60
~3,92
~7.33
~7.92
~8.62
Info pg. 185
M8 x 8 (4x)
Force (daN)
70
2.76 Ra < 0,05 52
HV ~ 1000 2.05
Cu
.12
3
Cu (mm)
(Cycles x millions)
.01
(Cycles / min)
L min
95 0,3 G1/8"
3.74 .01 Cu (mm)
Fixings
(10) ML7500-050-B
+ 1,0
Body + 0,5
+ .04
+ .02
Drop-ln Bottom mount FSA 95
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
G1/8"
FML 7500 new code: 39FML07500A G1/8"
M8x8(4x)
2.05
.2
20
5
10,5
.41
87
3.42
.22
5,5
95 0,3
3.74 .01
5,5
.22
G1/8"
M8 x 8 (4x)
Force (daN)
70
2.76
Ra < 0,05
HV ~ 1000 52
2.05
.12
Cu
Cu (mm)
(Cycles x millions)
L min
(Cycles / min)
87
3.42
.2
5
10,5
95 0,3
.41
.31
8
(10) ML7500-050-B-N
+ 1,0
Body + 0,5
+ .04
+ .02
FS2 95
Drop-ln Bottom mount FS2A 95 FSA 95
Technical specifications
ML 7500 - 015 - B - N 15 0.59 135 5.31 120 4.72 239 14.58 ML 7500 - 015 - B - N ~4,63 ~10.19
7700
ML 7500 - 025 - B - N 25 0.98 155 6.10 130 5.12 313 19.10 ML 7500 - 025 - B - N ~4,94 ~10.87
ML 7500 - 038 - B - N 38 1.50 185 7.28 147 5.79 17325 429 26.18 ML 7500 - 038 - B - N ~5,50 ~12.12
ML 7500 - 050 - B - N
ML 7500 - 063 - B - N
ML 7500 - 080 - B - N
50
63
80
1.97
2.48
3.15
210
240
280
8.27
9.45
11.02
160
177
200
6.53
6.97
7.87
( 5%
+20 C +68F ) 523
640
796
31.92
39.06
48.58
ML 7500 - 050 - B - N
ML 7500 - 063 - B - N
ML 7500 - 080 - B - N
~5,77
~6,25
~6,86
~12.69
~13.75
~15.09
Info pg. 185
22720
M10 x 8 (4x)
Force (daN)
20720
18720
16720
90
3.54 68 14720
Ra < 0,05 2.68
HV ~ 1000 12720
.12
Cu
Cu (mm)
(Cycles / min)
L min
(10) ML12000-050-B
ORDER + 1,0
Body + 0,5
+ .04
+ .02
Drop-ln Bottom mount FSA 120
Technical specifications
Code Cu L Lmin Fo Vo
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 kg lb
5
.2
10,5
.31
8
45
112
4.41 22
,5
120 0,3
5,5
.22
4.72 .01
.22
5,5
45
Force (daN)
20720
90 18720
3.54
16720
M10 x 8 (4x)
68
14720
2.68
.12
Cu
12720
(Cycles x millions)
L min
(Cycles / min)
112
4.41
.2
5
10,5
.41
.31
120 0,3
8
(10) ML12000-050-B-N
+ 1,0
Body + 0,5
+ .04
+ .02
FS2 120
Drop-ln Bottom mount FS2A 120 FSA 120
Technical specifications
ML 12000 - 015 - B - N 15 0.59 135 5.31 120 4.72 350 21.36 ML 12000 - 015 - B - N ~7,60 ~16.72
12720
ML 12000 - 025 - B - N 25 0.98 155 6.10 130 5.12 467 28.50 ML 12000 - 025 - B - N ~8,31 ~18.28
ML 12000 - 038 - B - N 38 1.50 185 7.28 147 5.79 28620 650 39.67 ML 12000 - 038 - B - N ~9,01 ~19.82
ML 12000 - 050 - B - N
ML 12000 - 063 - B - N
ML 12000 - 080 - B - N
50
63
80
1.97
2.48
3.15
215
245
285
8.46
9.65
11.22
165
182
205
6.50
7.17
8.07
( 5%
+20 C +68F ) 838
1021
1267
51.14
62.31
77.32
ML 12000 - 050 - B - N
ML 12000 - 063 - B - N
ML 12000 - 080 - B - N
~9,82
~10,90
~11,60
~21.60
~23.98
~25.52
Info pg. 185
ON
UC F
O
TI
OD T
PR OU
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
K 40 25 0.98 10 - 50 0.39 - 1.97 425 956 - - -
K 75 32 1.26 10 - 50 0.39 - 1.97 740 1665 - - -
K 100 38 1.50 6 - 50 0.24 - 1.97 1060 2385 - - -
K 100 N 38 1.50 6 - 50 0.24 - 1.97 1060 2385 - - -
K 180 50 1.97 6 - 50 0.24 - 1.97 1885 4241 - - -
K 180 N 50 1.97 6 - 50 0.24 - 1.97 1885 4241 - - -
K 470 75 2.95 10 - 50 0.39 - 1.97 4675 10520 - - -
K 470 N 75 2.95 10 - 50 0.39 - 1.97 4675 10520 - - -
K 750 95 3.74 10 - 50 0.39 - 1.97 7540 16956 - - -
K 750 N 95 3.74 10 - 50 0.39 - 1.97 7540 16956 - - -
K 1200 120 4.72 10 - 50 0.39 - 1.97 11780 26505 - - -
K 1200 N 120 4.72 10 - 50 0.39 - 1.97 11780 26505 - - -
K 1830 150 5.90 10 - 50 0.39 - 1.97 18410 41422 - - -
K 1830 N 150 5.90 10 - 50 0.39 - 1.97 18410 41422 - - -
REPLACED BY KE SERIES
The K series of nitrogen cylinders with piston seal has been replaced by the new KE series.
For any need about K series please go to:
www.specialsprings.com > download > obsolete catalogues.
or:
www.specialsprings.com > news > KE/K comparative chart.
SKUDO
Over Over
Pressure Stroke
Active Active
Safety Safety
Range chart
Model Body Stroke Cu Initial force
mm inch mm inch daN lb SKUDO OSAS OPAS
KE 400 25 0.98 10 - 50 0.39 - 1.97 425 956 - -
KE 750 32 1.26 10 - 50 0.39 - 1.97 740 1665 - -
KE 1000 38 1.50 6 - 50 0.24 - 1.97 1060 2385 -
KE 1800 50 1.97 6 - 50 0.24 - 1.97 1885 4241
KE 3000 63 2.48 10 - 50 0.39 - 1.97 2945 6626
KE 4700 75 2.95 10 - 50 0.39 - 1.97 4675 10518
KE 7500 95 3.74 10 - 50 0.39 - 1.97 7540 16965
KE 12000 120 4.72 10 - 50 0.39 - 1.97 11780 26505
KE 18500 150 5.90 10 - 50 0.39 - 1.97 18410 41422
.08
M6
2
1445
1345
1245
M5 x 7 (2x)
Force (daN)
1145
1045
+ 1,0
28 +0
945
+ .04
1.10 + 0 845
745
10
645
.39
545
M 4* 425
14
.55
Cu
.04
Cu (mm)
1
13,5
.53
(Cycles x millions)
23 .04
(Cycles / min)
.91
L min
23 R1
.91
.24
.04
6
Fixings
(10) KE 400-050-A
(10) KE 400-050-A-N +3
+2
SKUDO + .12
+ 1,0
Body + 0,5
+ .04
+ .02
+ .08
Drop-ln Bottom mount FC 25 B
Technical specifications
KE 400 - 010 - A 10 0.39 70 2.76 60 2.36 6,1 0.37 KE 400 - 010 - A - N ~0,16 ~0.35
425
KE 400 - 016 - A 16 0.63 91 3.58 75 2.95 10 0.61 KE 400 - 016 - A - N ~0,19 ~0.42
KE 400 - 025 - A 25 0.98 120 4.72 95 3.74 956 15,9 0.97 KE 400 - 025 - A - N ~0,23 ~0.51
KE 400 - 032 - A
KE 400 - 040 - A
32
40
1.26
1.57
140
165
5.51
6.50
108
125
4.25
4,92 ( 5%
+20 C +68F ) 19,6
24,6
1.20
1.50
KE 400 - 032 - A - N
KE 400 - 040 - A - N
~0,25
~0,28
~0.55
~0.62
KE 400 - 050 - A 50 1.97 195 7.68 145 5.71 30,4 1.86 KE 400 - 050 - A - N ~0,32 ~0.70
Info pg. 185
WARNING
REMOVE SKUDO
ONLY FOR:
Upside down mounting FC / FCQ fixings
4,5
.18
M6 1971
1771
M6 X 8 (2x)
Force (daN)
1571
+ 1,0
35 +0 1371
+ .04
1.4 + 0
1171
10
.39 971
M4
15 740
.59
Cu
.04
Cu (mm)
1
11,5
(Cycles x millions)
30 .04
(Cycles / min)
1.18
L min
27
3,5
1.06
.14
.24
6
32 0,3
.16
4
(10) KE 750-050-A-N +3
+ 1,0
Body + 0,5
+2 + .04
SKUDO + .12
+ .08 Drop-ln Bottom mount FS2A 32 + .02
FC 32A FSA 32
KE 750 - 010 - A 10 0.39 75 2.95 65 2.56 11,5 0.70 KE 750 - 010 - A - N ~0,27 ~0.59
740
KE 750 - 016 - A 16 0.63 93 3.66 77 3.03 17,6 1.07 KE 750 - 016 - A - N ~0,30 ~0.66
KE 750 - 025 - A 25 0.98 120 4.72 95 3.74 1665 26,6 1.62 KE 750 - 025 - A - N ~0,35 ~0.77
KE 750 - 032 - A
KE 750 - 040 - A
32
40
1.26
1.57
140
165
5.51
6.50
108
125
4.25
4.92 ( 5%
+20 C +68F ) 33,1
41,6
2.02
2.54
KE 750 - 032 - A - N
KE 750 - 040 - A - N
~0,39
~0,43
~0.86
~0.95
KE 750 - 050 - A 50 1.97 195 7.68 145 5.71 51,6 3.15 KE 750 - 050 - A - N ~0,49 ~1.08
Info pg. 185
X min = Cu + .2 in.
X min
WARNING WARNING
REMOVE SKUDO REMOVE SKUDO
ONLY FOR:
Cu = 0.39
ONLY FOR:
Upside down mounting FC / FCQ fixings FSA fixings
.18
4,5
M6 3110
2610
Force (daN)
M6 X 8 (2X)
+ 1,0
41 + 0 2110
+ .04
1.61 + 0
14 1610
.55
M6
17 1060
6 10 16 25 32 40 50
.67
Cu
.04
Cu (mm)
1
10,5
(Cycles x millions)
36 .04
(Cycles / min)
1.42
L min
33
3,5
1.30
.14
.24
6
38 0,3
.16
4
(10) KE 1000-050-A-N +3
+ 1,0
Body + 0,5
+ .04
+2
SKUDO + .12 + .02 FC 38A
+ .08 Drop-ln Bottom mount FS2A 38 FCQ 38A FSA 38
KE 1000 - 006 - A 6 0.24 61 2.40 55 2.17 10,7 0.65 KE 1000 - 006 - A - N ~0,34 ~0.75
KE 1000 - 010 - A 10 0.39 78 3.07 68 2.68 1060 18,5 1.13 KE 1000 - 010 - A - N ~0,40 ~0.88
KE 1000 - 016 - A 16 0.63 100 3.94 84 3.31 2385 30,1 1.84 KE 1000 - 016 - A - N ~0,45 ~0.99
KE 1000 - 025 - A 25 0.98 135 5.31 110 4.33 48,9 2.98 KE 1000 - 025 - A - N ~0,54 ~1.19
KE 1000 - 032 - A
KE 1000 - 040 - A
32
40
1.26
1.57
167
195
6.57
7.68
135
155
5.31
6.10
( 5%
+20 C +68F ) 66,9
81,5
4.08
4.97
KE 1000 - 032 - A - N
KE 1000 - 040 - A - N
~0,63
~0,70
~1.39
~1.54
KE 1000 - 050 - A 50 1.97 230 9.06 180 7.10 99,7 6.08 KE 1000 - 050 - A - N ~0,79 ~1.74
Info pg. 185
X min = Cu + .2 in.
X min
WARNING WARNING
REMOVE SKUDO REMOVE SKUDO
ONLY FOR:
Cu = 0.24
ONLY FOR:
Upside down mounting FC / FCQ fixings 0.39 FSA fixings
.18
4,5
M6 4400
3900
Force (daN)
M6 X 8 (2X)
+ 1,0
3400
53 + 0
+ .04
2.09 + 0 2900
20
2400
.79
M8
26 1885
1.02
Cu
.04
Cu (mm)
1
14,5
(Cycles x millions)
48 .04
(Cycles / min)
1.89
L min
43
1.69
.20
5
.24
6
50 0,3
.31
8
(10) KE 1800-050-A-N
+ 1,0
Body + 0,5
+3 + .04
+2
SKUDO + .12 FS2 50 + .02
FCB 50
+ .08
Drop-ln Bottom mount FS2A 50 FCQB 50 FSA 50
Technical specifications
Code Cu L Lmin Fo Vo connecting
hole M6
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 Micro hose kg lb
KE 1800 - 006 - A 6 0.24 66 2.60 60 2.36 20,5 1.25 KE 1800 - 006 - A - N ~0,64 ~1.41
KE 1800 - 010 - A 10 0.39 80 3.14 70 2.76 1885 33,6 2.05 KE 1800 - 010 - A - N ~0,71 ~1.56
KE 1800 - 016 - A 16 0.63 106 4.17 90 3.54 58,6 3.58 KE 1800 - 016 - A - N ~0,83 ~1.83
4241
KE 1800 - 025 - A 25 0.98 135 5.31 110 4.33 84,3 5.14 KE 1800 - 025 - A - N ~0,95 ~2.09
KE 1800 - 032 - A
KE 1800 - 040 - A
32
40
1.26
1.57
162
190
6.38
7.48
130
150
5.11
5.91
( 5%
+20 C +68F ) 109,8
135,4
6.70
8.26
KE 1800 - 032 - A - N
KE 1800 - 040 - A - N
~1,07
~1,20
~2.35
~2.64
KE 1800 - 050 - A 50 1.97 220 8.66 170 6.69 161,3 9.84 KE 1800 - 050 - A - N ~1,32 ~2.90
Info pg. 185
X min = Cu + .2 in.
X min
WARNING WARNING
REMOVE SKUDO REMOVE SKUDO
ONLY FOR:
Cu = 0.24
ONLY FOR:
Upside down mounting FC / FCQ fixings 0.39 FSA fixings
.18
4,5
M6 8000
7500
7000
Force (daN)
M8 X 8 (2x) 6500
+ 1,0
6000
66 +0
5500
+ .04
2.60 + 0 5000
4500
28
1.10 4000
M8 3500
34 2945
1.34
Cu
.04
Cu (mm)
1
.75
(Cycles x millions)
60
.06
(Cycles / min)
2.36
L min
56
.20
5
2.20
.24
6
63 0,3
.31
8
(10) KE 3000-050-A-N
+ 1,0
Body + 0,5
+3 + .04
FS2 63 + .02
FCB 63
+2
SKUDO + .12
+ .08 Drop-ln Bottom mount FS2A 63 FCQB 63
Technical specifications
Code Cu L Lmin Fo Vo connecting
150 bar - 2175 psi
hole M6
KE
mm inch mm inch mm inch daN / lb cm3 in3 Micro hose kg lb
KE 3000 - 010 - A 10 0.39 85 3.35 75 2.95 53,8 3.28 KE 3000 - 010 - A - N ~1,24 ~2.73
2945
KE 3000 - 016 - A 16 0.63 103 4.06 87 3.43 79,2 4.83 KE 3000 - 016 - A - N ~1,37 ~3.01
KE 3000 - 025 - A 25 0.98 130 5.12 105 4.13 6626 117 7.14 KE 3000 - 025 - A - N ~1,55 ~3.41
KE 3000 - 032 - A
KE 3000 - 040 - A
KE 3000 - 050 - A
32
40
50
1.26
1.57
1.97
150
175
205
5.91
6.89
8.07
118
135
155
4.65
5.31
6.10
( 5%
+20 C +68F ) 144,4
180
222
8.81
10.98
13.55
KE 3000 - 032 - A - N
KE 3000 - 040 - A - N
KE 3000 - 050 - A - N
~1,69
~1,86
~2,07
~3.72
~4.09
~4.56
Info pg. 185
WARNING
REMOVE SKUDO
ONLY FOR:
Upside down mounting FC / FCQ fixings
.18
4,5
M6 12894
11894
M8 X 8 (4x)
10894
Force (daN)
9894
+ 1,0
78 + 0 8894
+ .04
3.07 + 0 7894
40 6894
1.57
5894
M8
40 4675
1.57
Cu
.04
Cu (mm)
1
18
(Cycles x millions)
72
.06
(Cycles / min)
2.83
L min
67
.20
2.64
5
.24
6
75 0,3
.31
8
(10) KE 4700-050-A-N +3
Body + 0,5
+ .04
Bottom mount FS2 75 FCB 75
+2 + .02
SKUDO + .12
+ .08
Drop-ln FB 75 - FBA 75 FS2A 75 FCQB 75 FSA 75
Technical specifications
Code Cu L Lmin Fo Vo connecting
hole M6
150 bar - 2175 psi
mm inch mm inch mm inch daN / lb cm3 in3 Micro hose kg lb
KE 4700 - 010 - A 10 0.39 80 3.15 70 2.76 79,7 4.86 KE 4700 - 010 - A - N ~1,63 ~3.59
4675
KE 4700 - 016 - A 16 0.63 106 4.17 90 3.54 145,3 8.87 KE 4700 - 016 - A - N ~1,85 ~4.07
KE 4700 - 025 - A 25 0.98 135 5.31 110 4.33 10518 212,9 12.99 KE 4700 - 025 - A - N ~2,10 ~4.62
KE 4700 - 032 - A
KE 4700 - 040 - A
32
40
1.26
1.57
167
200
6.57
7.87
135
160
5.31
6.30 ( 5%
+20 C +68F ) 294,6
377
17.98
23.01
KE 4700 - 032 - A - N
KE 4700 - 040 - A - N
~2,39
~2,67
~5.26
~5.87
KE 4700 - 050 - A 50 1.97 240 9.45 190 7.48 476,1 29.05 KE 4700 - 050 - A - N ~3,04 ~6.69
Info pg. 185
X min = Cu + .2 in.
X min
WARNING WARNING
REMOVE SKUDO REMOVE SKUDO
ONLY FOR:
Cu = 0.39
ONLY FOR:
Upside down mounting FC / FCQ fixings FSA fixings
.18
4,5
M6 15892
14892
M8 X 8 (4x)
13892
Force (daN)
12892
+ 1,0
98 + 0 11892
+ .04
3.86 +0
10892
55 9892
2.17
8892
M8
52 7540
2.05
Cu
.04
Cu (mm)
1
21
(Cycles x millions)
92
.06
(Cycles / min)
3.62
L min
87
.20
3.43
5
.24
6
95 0,3
.31
8
(10) KE 7500-050-A-N
+ 1,0
Body + 0,5
+3 + .04
+2
SKUDO + .12 FS2 95 + .02 FCB 95
+ .08
Drop-ln Bottom mount FS2A 95 FCQB 95 FSA 95
Technical specifications
Code Cu L Lmin Fo Vo connecting
150 bar - 2175 psi
hole M6
KE
mm inch mm inch mm inch daN / lb cm3 in3 Micro hose kg lb
KE 7500 - 010 - A 10 0.39 90 3.54 80 3.15 158,6 9.68 KE 7500 - 010 - A - N ~2,99 ~6.58
7540
KE 7500 - 016 - A 16 0.63 116 4.57 100 3.94 268,6 16.39 KE 7500 - 016 - A - N ~3,34 ~7.35
KE 7500 - 025 - A 25 0.98 145 5.71 120 4.72 16965 381,8 23.30 KE 7500 - 025 - A - N ~3,74 ~8.23
KE 7500 - 032 - A
KE 7500 - 040 - A
KE 7500 - 050 - A
32
40
50
1.26
1.57
1.97
182
210
255
7.17
8.27
10.04
150
170
205
5.91
6.69
8.07
( 5%
+20 C +68F ) 542,6
654,3
844,4
33.11
39.93
51.53
KE 7500 - 032 - A - N
KE 7500 - 040 - A - N
KE 7500 - 050 - A - N
~4,27 ~9.39
~4,65 ~10.23
~5,29 ~11.64
Info pg. 185
X min = Cu + .2 in.
X min
WARNING WARNING
REMOVE SKUDO REMOVE SKUDO
ONLY FOR:
Cu = 0.39
ONLY FOR:
Upside down mounting FC / FCQ fixings FSA fixings
5,5
.22
G1/8
19331
M10 X 12 (4x)
18331
Force (daN)
17331
+ 1,0
123 +0
16331
+ .04
4.84 +0
15331
70 14331
2.76
13331
M8
68 11780
2.68
Cu
.04
Cu (mm)
1
22,5
(Cycles x millions)
115 .1
(Cycles / min)
4.53
L min
112
10,5
4.41
.20
.41
120 0,3
.31
8
(10) KE 12000-050-A-N
+ 1,0
Body + 0,5
+3 + .04
FS2 120 FC 120 A
+2 + .02
SKUDO + .12
+ .08
Drop-ln Bottom mount FS2A 120 FCQ 120 A FSA 120
Technical specifications
KE 12000 - 010 - A 10 0.39 100 3.94 90 3.54 282,4 17.23 KE 12000 - 010 - A - N ~5,45 ~11.99
11780
KE 12000 - 016 - A 16 0.63 126 4.96 110 4.33 453 27.64 KE 12000 - 016 - A - N ~6,06 ~13.33
KE 12000 - 025 - A 25 0.98 155 6.10 130 5.12 26505 630,9 38.50 KE 12000 - 025 - A - N ~6,70 ~14.74
KE 12000 - 032 - A
KE 12000 - 040 - A
32
40
1.26
1.57
187
220
7.36
8.66
155
180
6.10
7.09 ( 5% 843
+20 C +68F 1057,5 ) 51.44
64.53
KE 12000 - 032 - A - N
KE 12000 - 040 - A - N
~7,45
~8,22
~16.39
~18.08
KE 12000 - 050 - A 50 1.97 260 10.23 210 8.27 1315,9 80.30 KE 12000 - 050 - A - N ~9,14 ~20.11
Info pg. 185
X min = Cu + .2 in.
X min
WARNING
REMOVE SKUDO
ONLY FOR:
Upside down mounting FC / FCQ fixings FSA fixings
5,5
.22
G1/8
M10 X 12 (4x) 29267
Force (daN)
27267
+ 1,0
153 +0 25267
+ .04
6.02 + 0
23267
95
3.74 21267
M8
90 18410
3.54
Cu
.04
Cu (mm)
1
24,5
(Cycles x millions)
145 .1
(Cycles / min)
L 0,25
5.71
L min
142
5.59
10,5
.20
.41
150 0,3
.31
8
(10) KE 18500-050-A-N
+ 1,0
Body + 0,5
+3 + .04
FS2 150 FC 150 A
+2 + .02
SKUDO + .12
+ .08
Drop-ln Bottom mount FS2A 150 FCQ 150 A FSA 150
Technical specifications
KE 18500 - 010 - A 10 0.39 110 4.33 100 3.94 502,4 30.66 KE 18500 - 010 - A - N ~9,47 ~20.83
18410
KE 18500 - 016 - A 16 0.63 136 5.35 120 4.72 776 47.35 KE 18500 - 016 - A - N ~10,43 ~22.95
KE 18500 - 025 - A 25 0.98 165 6.50 140 5.51 41422 1061,7 64.79 KE 18500 - 025 - A - N ~11,46 ~25.21
KE 18500 - 032 - A
KE 18500 - 040 - A
32
40
1.26
1.57
197
235
7.76
9.25
165
195
6.50
7.68 ( 5%
+20 C +68F ) 1400,3
1804,9
85.45
110.14
KE 18500 - 032 - A - N
KE 18500 - 040 - A - N
~12,52
~14,09
~27.54
~31.00
KE 18500 - 050 - A 50 1.97 270 10.63 220 8.66 2156,6 131.60 KE 18500 - 050 - A - N ~15,35 ~33.83
Info pg. 185
X min = Cu + .2 in.
X min
WARNING
REMOVE SKUDO
ONLY FOR:
Upside down mounting FC / FCQ fixings FSA fixings
CHARACTERISTICS:
- An advantageous alternative to conventional and costly Manifold cylinders.
- Large variety of combinations with the use of standard cylinders (independent).
- Total elimination of pipes and fittings.
- Maximum economy in execution and costs similar to systems with pipes and fittings.
- Easy maintenance, the same as standard cylinders (independent).
- Connection plates can be made directly by users.
- Maximum flexibility in creation of systems.
- No special tools required for installation.
ADDITIONAL SERVICES:
- Special Springs can supply the plates/cushion to customer specifications,
tested and ready for installation.
CARACTERSTICAS:
- Ventajosa alternativa a los tradicionales y costosos cilindros Manifold.
- Gran variedad de combinaciones con el uso de cilindros (autnomos) estndar.
- Total eliminacin de tubos y racores.
- Mxima economa de realizacin y costes similares a los de las instalaciones con tubos y racores.
- Fcil manutencin, igual a la de los cilindros (autnomos) estndar.
- Placas de conexin realizables directamente por los usuarios.
- Mxima flexibilidad de realizacin de los equipos.
- No se requiere ninguna herramienta especial para la instalacin.
ULTERIORES SERVICIOS:
- Special Springs es en grado de proporcionar las placas/cojn sobre especificaciones del cliente,
Comprobadas y listas para la instalacin.
ED system
0,2 x 45
.008 x 45
8 H8
.31 H8
P
Ra1,6 m
A Rm 64 inch
i
> 20 mm
.79 in.
Model A i P
HR700, RV750, RF750 2 X M8 26 mm 1.02 inch see catalogue
SC500, S500 2 X M8 26 mm 1.02 inch see catalogue
H 700 2 X M8 26 mm 1.02 inch see catalogue
HR1000, RV1000, RF1000 2 X M8 34 mm 1.34 inch see catalogue
SC750, S750 2 X M8 34 mm 1.34 inch see catalogue
H1000 2 X M8 34 mm 1.34 inch see catalogue
HR1500, RV1500, RF1500 2 X M8 34 mm 1.34 inch see catalogue
KE1800 2 X M6 34 mm 1.34 inch see catalogue
KE3000 see catalogue see catalogue see catalogue
For body 75 see catalogue see catalogue see catalogue
General catalogue
Series RV, RF, SC, H, HR, www.specialsprings.com
MANI
LS, LI, KE, S, www.partserver.com FOLD
Cu
45 mm
All 1.77 in.
EF system
0,2 x 45
.008 x 45
8 H8
.31 H8
ch
64 m
in
Rm a1,6
R
* > 20 mm
.79 in.
* Manifold fixings
E
A B C D E
mm in. mm in. mm in. mm in. mm in. mm in.
100 3.94 100 3.94 73,5 2.89 73,5 2.89 20 0.79 75 2.95
D
B
General catalogue
Series RV, RF, SC, H, HR, www.specialsprings.com
LS, LI, KE, S www.partserver.com
Cu
75 mm
All
2.95 in.
EN system
R 0,6
.024
Rm 64 inch
Ra1,6 m
10 H8
Ra1,6 m
.39 H8
Rm 64 inch
> 20 mm
.79 in.
General catalogue
Series ML www.specialsprings.com
www.partserver.com
MANI
FOLD
Cu
All 50 mm
1.97 in.
M8
M8
M8
M8
8 H8 .31 H8 8 H8
.31 H8
m ch m ch
a 1,6 4 in 1,6 4 in
R 6 a
R 6
Rm Rm
16,5
.65
2.05
52
1.38
35
25,5
1
.71
18
7,5
.30
Manifold Port Easy Manifold Port
2.01 .91
Manifold Port
40
1.57
58
2.28
8 H8
.31 H8
1.77
m ch
45
a 1,6 4 in
R 6
.20
Rm
.83
5
21
5
.20
35 Easy Manifold Port
1.38 Manifold Port
46
1.81
MANI
FOLD
T
S + 0.1
S + .004
6,1 (2x)
Z min
.24 (2x)
R
22
.87
B
F
X min
D 0.3
D .01
d R0,15
15
.006
2,5
.1
12 Cu
Ra 0.8
L
.47
.14 .008
3,5 0,2
45
.75
19
H
Dett. B
P
M Fo = P x S S = rod section area
P = nominal charging pressure
S (CA.2500) = 22,9 cm2 Fo = nominal initial force
3.55 in.2
Technical specifications
Code Fo M Cu L H D d P R T S F Xmin Zmin
daN - mm mm mm mm mm mm mm mm
mm inch mm inch mm inch mm inch
lib inch inch inch inch inch inch inch inch
CA 2500 - 006 - A M 64 x 2 06 0.24 18 0.71 30 1.18 33 1.30
CA 2500 - 010 - A 2520 M 64 x 2 10 0.39 22 0.87 34 1.34 70 30 59,5 58 80 65,9 37 1.46 10 8
CA 2500 - 015 - A 5665 M 64 x 2 15 0.59 27 1.06 39 1.54 2.76 1.18 2.34 2.28 3.15 2.59 42 1.65 0.39 0.31
CA 2500 - 020 - A M 64 x 2 20 0.79 32 1.26 44 1.73 47 1.85
T
6,1 (2x)
S + 0.1
.24 (2x) S + .004
R
Z min
20
.79
B
F
X min
d
Cu
R 0,15
15
.12
3
R .006
L
Ra 0.8
.59
15
1.65
42
6,1 (4x)
.14 .008
3,5 0,2
D .001
15
.59
Dett. B
H
Fo = P x S
S (CB.1000) = 9,62 cm2
P S = rod section area
M
1.49 in.2 P = nominal charging pressure
S (CB.2500) = 22,9 cm2 Fo = nominal initial force
3.55 in.2
Technical specifications
Code Fo M Cu L H D d P R T S F Xmin Zmin
daN mm mm mm mm mm mm mm mm
- mm inch mm inch mm inch mm inch
lib inch inch inch inch inch inch inch inch
CB 1000 - 025 - A M 48 x 2 25 0.98 67 2.64 23 0.91 26 1.02
CB 1000 - 038 - A M 48 x 2 38 1.50 80 3.15 36 1.42 39 1.54
CB 1000 - 050 - A 1060 M 48 x 2 50 1.97 92 3.62 48 1.89 54 24 43,5 44 64 49,9 51 2.01 10 8
CB 1000 - 075 - A 2382 M 48 x 2 75 2.95 117 4.61 73 2.87 2.13 0.94 1.71 1.73 2.52 1.96 76 2.99 0.39 0.31
CB 1000 - 100 - A M 48 x 2 100 3.94 142 5.59 98 3.86 101 3.98
CB 1000 - 150 - A M 48 x 2 150 5.91 192 7.56 148 5.83 151 5.94
T
S + 0.1
6,1 (2x)
.24 (2x) S + .004
R
.75
19
.87
22
B
X min
R0,15
R .006 15
Cu
Ra 0.8
.12
3
.14 .008
3,5 0,2
45
15
.59
L
6,1 (4x)
Dett. B
L min
.24 (4x)
Fo = P x S
D 0.3
D .01 S (CC.0500) = 4,90 cm2
0.55 in.2 S = rod section area
17
.67
Press Ram
Press Ram
Sliding part
Cylinders
with Sliding part
controlled Cylinders
return with
controlled
return
Press Ram
Press Ram
Formed sheet
PRESS SLIDE RETURN WITH CYLINDER RETENTION BLANK HOLDER RETURN WITH CYLINDER
- the press run is going up; EXTENSION AND PRESS AT TDC
- the blank holder remains temporarily closed, with - the press run has gone up;
the cylinders still being compressed and blocked. - the blank holder is going up and extracting the workpiece.
Stroke (mm)
TDC TDC
sR
es
www.specialsprings.com.
es
sR
Pr
am
Cylinder block
.51
12
12
12
13
.47
.47
14
20
.47
.55
.79
20
20
20
14
14
14
.55
.79
.55
.79
.55
.79
15 (4x) 15 (2x) 15 (4x) 15 (2x) 18 (4x) 15 (4x) 20 (4x) 15 (4x)
.59 (4x) .59 (2x) .59 (4x) .59 (2x) .71 (4x) .59 (4x) .79 (4x) .59 (4x)
70 75 100 120
2.76 2.95 3.94 4.72
50 56,5 73,5 92
1.97 2.22 2.89 3.62
A A A A
2.95
75
2.76
3.94
4.72
100
120
70
A A 40 60
20 20 1.57 A 2.36 A
1.97
56,5
73,5
3.62
2.22
2.89
50
92
.79 .79
13,5 (4x)
A -A 17,5 (4x) 11 (4x)
A -A 17,5 (4x) A -A
11 (4x) 13,5 (4x)
.53 (4x) .43 (4x) .69 (4x) .43 (4x) .69 (4x) .53 (4x)
.67
.51
.79
.79
.59
.59
17
15
17
13
.67
20
25
15
.51
.98
13
25
A A A
8.27
7.48
210
5.51
190
140
80 100 120
A A A
3.15 3.94 4.72
109,5
4.31
5.43
6.69
170
138
.47
.47
14
20
14
20
14
20
.51
14
.55
.79
.55
.79
.55
.55
13
20
.47
12
12
12
.79
.79
18 (4x) 9 (2x) 18 (4x) 9 (2x) 18 (4x) 9 (4x) 20 (4x) 9 (4x)
.71 (4x) .35 (2x) .71 (4x) .35 (2x) .71 (4x) .35 (2x) .79 (4x) .35 (4x)
70 75 100 120
2.76 2.95 3.94 4.72
50 56,5 73,5 92
1.97 2.22 2.89 3.62
2.95
75
2.76
70
A A A A
2.22
56,5
73,5
40 60
2.89
3.62
92
A 2.36 A
1.97
1.57
50
20 20
A A
3.94
4.72
100
120
.79 .79
20
15
15
.51
25
25
.67
.59
.79
.59
.98
.59
.98
17
13
17
A A A
109,5
6.69
5.43
138
170
80 100 120
4.31
A A A
3.15 3.94 4.72
140
5.51
210
8.27
190
7.48
/
TM ... TSMM8
/
G1/8" M6
/
TNB TSM 7/16
G1/8"
RMTC
FS2 ... FS2 ...
RSMTCD
RD... RTC-D RSMPTD BDM...
45,5 50,5
12
32,5 38,5
7
4
4
7
.47
.16
.28
.16
.28
.16
.28
.31
1.28 1.52 1.79 1.99
50 55 70 75
1.97 2.17 2.76 2.95
35 40 50 56,5
1.38 1.57 1.97 2.22
1.57
2.17
1.97
2.76
56,5
2.22
2.95
50
70
1.38
1.97
40
55
75
35
50
A A A A A A A A
12
12
12
8
8
8
.31
.47
.31
.47
.31
.47
.31
.47
2.5 2.97 3.76 4.74
85 100 120 140
3.35 3.94 4.72 5.51
63,5 73,5 92 109,5
2.5 2.89 3.62 4.31
109,5
73,5
63,5
3.35
3.94
2.89
3.62
4.72
4.31
5.51
100
120
140
2.5
85
92
A A A A A A A A
150,5 195,5
12
13
8
8
.31
.47
.31
.51
5.93 7.70
190 210
7.48 8.27
138 170
5.43 6.69
6.69
8.27
5.43
7.48
170
210
138
190
A A A A
/
TM ... TSMM8
/
TNB TSM 7/16 /
G1/8" M6
FS2A ...
G1/8"
7
4
8
.16
.28
.16
.28
.16
.28
.31
.47
12
7
1.28 1.52 1.79 1.99
50 55 70 75
1.97 2.17 2.76 2.95
40 44 57 62
1.57 1.73 2.24 2.44
1.06
1.26
1.57
1.77
1.06
1.30
32
45
.71
.79
27
40
18
27
20
33
A A A A A A A A
12
8
.47
.31
12
12
.47
.47
.31
.31
8
12
.47
.31
2.76
3.74
3.54
4.53
2.13
2.76
115
42
58
70
90
95
54
70
A A A A A A A A
150,5 195,5
8
12
13
.47
.51
.31
.31
5.93 7.70
190 210
7.48 8.27
165 185
6.50 7.28
5.71
7.48
4.72
6.50
190
120
145
165
A A A A
= =
==
==
.35
.35
.35
.35
9
9
6,6 (4x) .26 (4x) 6,6 (4x) .26 (4x) 6,6 (4x) .26 (4x) 6,6 (4x) .26 (4x)
44 1.73 50 1.97 35 40
30 1.18 34 1.34 1.38 1.57
68
2.68
1.57
60
1.38
2.36
40
1.18
35
.71
18
30
.98
.47
12
25
A A A A
A A A A
ISO 11901-2 ISO 11901-2 ISO 11901-2 ISO 11901-2
FC 45A VDI 3003
CNOMO E24.54815.N
FC 50A VDI 3003
CNOMO E24.54815.N
FC 63A VDI 3003
CNOMO E24.54815.N
FC 75A VDI 3003
CNOMO E24.54815.N
47 A- A 54 A- A 67 A- A 80 A- A
1.85 2.13 2.64 3.15
45,5 50,5 63,5 75,5
1.79 1.99 2.5 2.97
==
==
==
==
.51
.51
.63
.63
13
16
13
16
9 (4x) .35 (4x) 9 (4x) .35 (4x) 11 (4x) .43 (4x) 11 (4x) .43 (4x)
50 56,5 73,5 73,5
1.97 2.22 2.89 2.89
122
122
4.80
4.80
86
73,5
95
3.39
3.74
2.89
56,5
1.97
2.22
73,5
2.89
50
A A A A
A A A A
ISO 11901-2 ISO 11901-2 ISO 11901-2 ISO 11901-2
FC 95A VDI 3003
CNOMO E24.54815.N
FC 120A VDI 3003
CNOMO E24.54815.N
FC 150A VDI 3003
CNOMO E24.54815.N
FC 195A CNOMO E24.54815.N
VDI 3003
==
==
1.06
1.06
.71
18
27
27
21
.83
13,5 (4x) .53 (4x) 13,5 (4x) .53 (4x) 17,5 (4x) .69 (4x) 17,5 (4x) .69 (4x)
92 109,5 138 170
3.62 4.31 5.43 6.69
290
220
175
11.42
150
8.66
109,5
5.91
6.89
6.69
5.43
3.62
4.31
138
170
92
A A A A
A A A A
= =
= =
= =
.51
16
16
13
.63
.63
.71
18
9 (4x) .35 (4x) 11 (4x) .43 (4x) 11 (4x) .43 (4x) 13,5 (4x) .53 (4x)
56,5 73,5 73,5 92
2.22 2.89 2.89 3.62
122
150
122
73,5
2.89
4.80
3.62
5.91
73,5
95
2.89
4.80
56,5
3.74
2.22
92
A A A A
A A A A
FCA
Fixings - Bridas
16 .63
16 .63
8.31
8.31
8.31
= =
= =
= =
M6
M6
34 1.34
60 2.36
A A A
A A A
FCQ 38A ISO 11901-2 FCQ 45A ISO 11901-2 FCQ 50A ISO 11901-2 FCQ 63A ISO 11901-2
A- A A- A A- A A-A
6,6 (4x) 40 11 (4x) 67
9 (4x) 47 9 (4x) 54
.26 (4x) 1.57 .43 (4x) 2.64
.35 (4x) 1.85 .35 (4x) 2.13
==
==
==
==
.51
.63
.35
.51
13
13
16
9
73,5 2.89
90 3.54
50 1.97
64 2.52
56,5 2.22
2.76
40 1.57
52 2.05
A A A A
70
A A A A
FCQ 75A ISO 11901-2 FCQ 95A ISO 11901-2 FCQ 120A ISO 11901-2 FCQ 150A ISO 11901-2
A- A A- A A- A A- A
11 (4x) 80 13,5 (4x) 100 13,5 (4x) 125 17,5 (4x) 155
.43 (4x) 3.15 .53 (4x) 3.94 .53 (4x) 4.92 .69 (4x) 6.10
==
1.06
21
==
==
==
18
.71
27
.83
16
.63
109,5 4.31
5.12
92 3.62
110 4.33
138 5.43
162 6.38
A A A A
130
A A A A
A- A
17,5 (4x) 200
.69 (4x) 7.87
1.06
==
27
195,5
7.70
210
8.27
170
6.69
170 6.69
210 8.27
==
==
.63
.71
16
.51
.63
13
16
18
50,5 63,5 75,5 95,5
1.99 2.50 2.97 3.76
70 90 90 110
2.76 3.54 3.54 4.33
56,5 73,5 73,5 92
2.22 2.89 2.89 3.62
56,5 2.22
2.76
2.89
3.54
3.62
4.33
2.89
3.54
A A A A
110
73,5
73,5
92
70
90
90
A A A A
ISO 11901-2
FSA 32 VDI 3003 FSA 38 VDI 3003 FSA 45 VDI 3003 FSA 50 VDI 3003
CNOMO E24.54815.N
22 .87 M8 25 .98 M8 28 1.10 M8 40 1.57 M8
45 1.77
55 2.17
60 2.36
80 3.15
=
=
=
=
.59
.59
.59
15
15
15
.79
20
31 1.22 34 1.34 37 1.46 50 1.97
72 2.83 77 3.03 82 3.23 110 4.33
9 (2x) 9 (2x) 9 (2x) 9 (2x)
32 1.26 38 1.50 45 1.77 .35 (2x) 50 1.97
.35 (2x) .35 (2x) .35 (2x)
30 1.18
20 .79
20 .79
20 .79
= =
= =
= =
= =
= 54 2.13 = = 59 2.32 = = 64 2.52 = = 90 3.54 =
90 3.54 95 3.74 100 3.94 130 5.12
ISO 11901-2 ISO 11901-2 ISO 11901-2 ISO 11901-2
FSA 75 VDI 3003
CNOMO E24.54815.N
FSA 95 VDI 3003
CNOMO E24.54815.N
VDI 3003 FSA 150
FSA 120 CNOMO E24.54815.N VDI 3003
CNOMO E24.54815.N
52,5 2.07 M10 67,5 2.66 M12 77,5 3.05 M12 95 3.74 M12
105 4.13
7.87
5.83
4.92
=
=
=
=
148
200
125
=
=
=
=
20
20
20
20
.79
.79
.79
.79
63,5 2.50 80 3.15 92,5 3.64 110 4.33
137 5.39 170 6.69 195 7.68 230 9.06
11 (2x) 13,5 (2x) 13,5 (2x) 13,5 (2x)
95 3.74
.43 (2x)
75 2.95 .53 (2x) .53 (2x) 120 4.72 .53 (2x) 150 5.91
30 1.18
30 1.18
30 1.18
30 1.18
= =
= =
= =
= =
GM
Fixings - Bridas
GM 38 GM 45 GM 50
.47
12
12,3
12,9
56 62 68
.48
.51
DM 16 DM 24 DI 1-8
.31
14
10
.55
.39
8
S 24 S 36 S 38
Special Fixings
Fixings - Bridas
FHR01000
9 (4x) A-A
.35 (4x)
11,5
.45
70
2.76
56
2.20
1.08
18,5 27,5
46 1.81
60 2.36
A
.73
25
.98
RTC-D
RTC-M RTC-D PC - 3
RTT-R
TNA RTC-M
RTT-R RTT-C RTC-D
RTC-L
RTC-R RTC-D RTC-M
RTC-D
BD 6 RTC-D
RTC-M
39MCPA AUMCP
RTC-D
RTT-R RTC-M
RTC-D RTC-D
RTC-D RTC-D
RTC-D RTC-D
RTT-R RTT-R
39MCPA PC 5
BENEFITS
- Same pressure in all cylinders
- Pressure control = force control
- Increase/decrease of pressure = increase/decrease of force by control panel even during stamping operation without
direct acting to the cylinders.
- Lower pressure increase by using compensation tank
- Possibility to manage pressure and forces different in the same tool by using the multipanel MCP+AUMCP.
- Safety stop of production by using pressure switch.
- Use of the safety plug with rupture disc CE
- Flexibility by using hose and connection JIC 37, minimess or micro hoses and couplings and many useful accessories.
The hosed system cylinders (model code + N/NA) are supplied without charging valve and with special body/end plate when specified.
However SC/H/HR/LI/LS series can be converted from self-contained to hose system simply removing the charging valve. Assure all pressure
is exhausted and rod fully retracted into the body before starting this operation.
In case would be necessary to remove any of the installed components, assure all pressure is exhausted by acting through the control panel.
VENTAJAS
- La misma presin en todos los cilindros
- Control de la presin = control de la fuerza
- Aumento/reduccin de la presin=aumento/reduccin de la fuerza mediante el panel de control incluso en operaciones
de estampacin sin actuacin directa sobre los cilindros
- Pueden emplearse pulmones de compensacin para reducir el aumento de la presin al final de la compresin
- Gestin de equipos y fuerzas distintas sobre el mismo molde (uso multipanel MCP+AUMCP)
- Parada de emergencia con presostato
- Tapn de seguridad con disco de ruptura CE
- Flexibilidad de conexin con tubos y acoplamientos JIC 37, Minimess o micro standard
Los cilindros para su conexin en sistema (cdigo modelo + N/NA) se sirven sin vlvula unidireccional y con cuerpo/base especiales en
los casos en que se requieran. En las series SC/H/HR/LI/LS, los cilindros autnomos pueden transformarse en cilindros para su conexin en
sistema con slo quitar los dispositivos de estanqueidad del orificio de carga.
Antes de realizar esta operacin, vaciar completamente la presin.
Si fuera necesario quitar alguno de los componentes instalados, vaciar completamente la presin mediante el panel de control.
Wrong
Errado
Max 60 Nm
X
+5 +.2
L -0 L -0
.28
7
7/16"-20 UNF 7/16"-20 UNF
8,5mm
.33 in.
43 mm 43 mm
1.69 in. 1.69 in. 18,5
.73
S 15
S 15
10,6 .42
9,1
.36
L (mm) = (X - 25) 7,6
L (in.) = (X - 0.98) .30
Longitud mnima: 140mm (5.51 in.) - Presin de ejercicio: 415 bar max. (6017 psi) max. - Presin de rotura: 1655 bar
(23,998 psi) - R (radio de curvatura): 13 mm (0.51 in.) min. Temperatura de funcionamiento:-40 - +100 C (-40 - +212 F).
X
+5 +.2
Max 60 Nm
Max 60 Nm
L L -0
.28
-0
7
5,1mm
S 14
.38
Cod. SMREP 7/16 Cod. SMREP 7/16
9,1
.36
4,7
L (mm) = (X - 25) .19
L (in.) = (X - 0.98)
Minimum length: 90mm (3.54 in.) - Operation pressure: 630 bar (9 ,135 psi) max. - Burst pressure: 1890 bar (27 ,405 psi) -
R (bending radius): 20 mm (0.79 in.) min.Operation temperature: -40 - +100 C (-40 - +212 F).
Longitud mnima: 90mm (3.54 in.) - Presin de ejercicio: 630 bar (9 ,135 psi) max. - Presin de rotura: 1890 bar (27 ,405 psi) -
R (radio de curvatura): 20 mm (0.79 in.) min. - Temperatura de funcionamiento: -40 - +100C (-40 - +212 F).
.05
~55 ~2.17
~2
~12 ~.47
2
~5
7/16"-20 UNF 45
2.17
~55
~.71
~18
~.47
~12
7/16"-20 UNF
~.79
Max 25 Nm ~20 7/16"-20 UNF
Max 25 Nm Max 25 Nm
G 1/8" G 1/8" G 1/8"
~2.17
~55
~55 ~2.17 ~55 ~2.17
~12 ~.47 ~12 ~.47
~.47
7/16"-20
~12
TNB/ TSM 7/16
G 1/8"
~.71
7/16"-20 UNF ~18 7/16"-20 UNF
Max 25 Nm Max 25 Nm
~.71
~18
~.98
~25
7/16"-20 UNF
7/16"-20 UNF
Max 60 Nm
Max 60 Nm
~.47
~12
7/16"-20 UNF
9
~4
~45
~22 ~.87
~12 Max 60 Nm
Max 60 Nm
~.47
~55
~2.17
15 ~55
~2.17
~12 ~12
~55
.59 ~.47
~55
43 43 ~2.17
~.47 ~.47 7/16"-20 UNF
1.69 1.69 ~12 ~.47
~.47
~12
~2.17
~55
~55
5,1mm
.20 in.
12,65 X 1,5 12,65 X 1,5
.79
.79
20
20
MREPD MREPD
17 mm 10 mm
.67 in. Cod. TMD .39 in.
+5 +.2
L -0 L -0
5,1mm
.20 in.
12,65 X 1,5
.79
20
MREPR
MREPD
17 mm
.67 in. Cod. TMDR 12,65 X 1,5
20 mm
.79
+5 +.2
L -0 L -0
5,1mm
.20 in.
MREPR MREPR
Minimum length: 90mm (3.54 in.) (MREPD), 105mm (MREPR) - Operation pressure: 650 bar (9 ,425 psi) max. - Burst pressure: 1650
bar (23 ,925 psi) - R (bending radius): 20 mm (0.79 in.) min. - Operation temperature: -20 - +100 C (-4 - +212 F).
Longitud mnima: 90mm (3.54 in.) (MREPD), 105mm (MREPR) - Presin de ejercicio: 650 bar (9 ,425 psi) max. - Presin de rotura:
1650 bar (23 ,925 psi) - R (radio de curvatura): 20 mm (0.79 in.) min. - Temperatura de funcionamiento: -20 - +100C (-4 - +212 F).
cod. 36FF06A
9,6
.38
All dimensions in mm.
.28
7
18,5 4,7
.73 .19
S 12,65x1,5
S 12,65x1,5
18,5
.73
29 1.69
43
.47
.47
12
1.14 12
S14
1.14
S 14
29
1215 1215
Max 25 Nm
.47
12
.16
4
.31
S 12,65x1,5
8
G1/8"
13,9 .55
1215
1215
10
6 .39
.24
Distribution block
Bloque de distribucin
.24
.24
G1/8" 1.22
6
6
6
.79
.79
18
20
1.54 20
1.54
1.54
39
39
39
TM...
TM... TM...
G1/8" G1/8"
G1/8"
RMTC
RMTC RMTC
BDM1
RMTC TM... BDM2 RMTC RMTC BDM4
TM... TM...
5,1 mm
.20 in.
Standard lengths available (mm) M8 x 1 1.02 in. 1.02 in. M8 x 1
inclusive of no. 2 connections SMREP M8
Longitud estndar (mm)
con 2 racores incluidos SMREP M8
X
m
5N
ax
0M
S1
M8 x 1
1.0 mm
M8 x 1
26
n.
2i
5,1 mm
.20 in.
26 mm
1.02 in.
min. 170 mm (6.69 in.) upword increase of 10 mm (0.39 in.)
L (mm) = (X - 25)
standard L=
Example (TSMM8 170 mm; TSMM8 180 mm; TSMM8 190 mm; ...) L (in.) = (X - 0.98)
X
m
S1
5N
0M
ax
+5
ax
0M
L -0
5N
S1
m
5,1 mm
.20 in.
1.0 mm
M8 x 1 M8 x 1
26 2 in.
mm
n.
26
1.0
2i
L (mm) = X
min. 190 mm (7.48 in.) upword increase of 10 mm (0.39 in.)
L (in.) = X
standard L=
Example (TSMM8 190 mm; TSMM8 200 mm; TSMM8 210 mm; ...)
Operation pressure: 630 bar (9 ,135 psi) max. - Burst pressure: 1890 bar (27 ,405 psi) - R (bending radius): 20 mm (0.79 in.) min.
Operation temperature: -40 +100C (-40 - +212 F).
Presin de ejercicio: 630 bar (9 ,135 psi) max. - Presin de rotura: 1890 bar (27 ,405 psi) - R (radio de curvatura): 20 mm (0.79 in.) min.
Temperatura de funcionamiento: -40 + 100C (-40 - +212 F).
cod. 36FF06A
9,6
.38
All dimensions in mm.
All dimensions in inch.
.28
7
9,1
.36
18,5 4,7
.73 .19
Nipples cod. RSMTCD cod. RSMPTD new code: 36MTTD new code: 36MTC
Niple
S10 Max 5,5 Nm S14 Max 5,5 Nm S10 Max 5,5 Nm S14 Max 5,5 Nm
M8x1 G1/8" M8x1 M6x1
8 .31
6,2 .24
6,2
.24
17,4
.69
.79
.91
.91
23
.32 20
23
8.2
6,2
.24
6,2
.24
.31
8
13,8
.54
.79
20
1.10
.24 28
BDSM1 TSMM8
.24
6,2
6
RSMPTD
M8x1 M8x1
TSMM8 S14 Max 5,5 Nm
RSMTCD
cod. MT cod. MB
M6 M6
1,5 .06 1,5 .06
5,5
.22
.24 .31 .22
6,2 7,8 5,5
24,35 .96
.79
20 .79
10
.39
24,35
MT MB
.96
20,5
.81
.55
14
BDSM2
20
TSMM8
M8 M6
S10 TSMM8 10 10 TSMM8 S10
Max 3,5 Nm RSMTCD .39 .39 Max 3,5 Nm
.79
M6
20
21
S4
5,4
M6 M6 M6
11,5
28 1.10
.45
11,5
11,5
.45
.45
28 1.10
20 .79
12 .47
28 1.10
20 .79
12 .47
20 .79
12 .47
TSMM8
RSMTCD
M6 M6 M6 TSMM8
TSMM8
RSMTCD
BDSM2
BDSM1 BDSM2-45
RSMTCD RSMTCD
All dimensions in mm. TSMM8 TSMM8
All dimensions in inch.
9/16"-18
27 27
13 .51
1.06 1.06
9/16" - 18
27 27
12 .47
1.06 1.06
9/16-18
27 Cut of
1.06 allowance 35 Cut of
9/16-18 1.38 allowance
cod. H-F90L
90 Long Swivel
9/16-18
9/16-18
9/16-18
21,6
27,4 .85
1.08
9/16-18 9/16-18 21,6 9/16-18 21,6
0.85 0.85
53,3
21,5 cod. PA-RT 2.10
43 0.85 9/16-18 29,2 9/16-18
1.69 Port Adapter- 1.15
21,5
9/16-18 Run Tee
0.85
9/16-18
43,5
1.71
22 22 50,4
0.87 0.87 1.98
G 1/8 BSPP
cod. PA-BTS 104,6
4.12
Port Adapter- 9/16-18 29,2 9/16-18 cod. PA-TWS
Branch Tee 1.15
Port Adapter-
Swivel Two Way
9/16-18
Swivel
9/16-18
50,4
1.98
22
0.87
G 1/8 BSPP
cod. PA-MWS
Port Adapter-Multi Way Swivel
21,6
0.85
STANDARD SWIVEL NUT FITTINGS 9/16-18
9/16-18 43,2
1.70 9/16-18
The Special Springs mini control panel, thanks to its unique miniaturized design, offers wide flexibility of use, increased when
combined with additional AUMCP units. It consists of a steel block with pressure gauge, charging and discharging valve, 5 outlets and
one on-off valve.
El mini-panel de control Special Springs, gracias a su exclusivo diseo miniaturizado, ofrece una gran flexibilidad, que aumenta
con las unidades adicionales AUMCP. Consiste en una placa de acero con manmetro, vlvula de carga y descarga, 5 salidas y vlvula
de interceptacin.
1.97
1.5750
40
.20
5
15 .59 Port (E) G1/8" 41 5
1.61 .20
30 1.18 90
5,5 (2x)
78 3.07 3.54 Easy Manifold Port .22 (2x)
Manifold Port
1- Discharging valve
Vlvula de desahogo 3
1 2
2- Quick coupling for charging Cejn
Acoplamiento rpido para carga Cejn
5- Interception valve 5 4
Vlvula de interceptacin
Additional units for the mini control panel MCPA. Ideal for operating hosed systems or single cylinders with different pressures in
the same mould. Each unit includes pressure gauge, on-off valve and 1 outlet. Designed for a maximum combination of 1 MCPA + 4 AUMCP.
Unidades adicionales para mini-panel MCPA. Ideales para la gestin de sistemas o de cilindros aislados con presiones distintas en un mismo molde.
Cada unidad incluye un manmetro, una vlvula de interceptacin y 1 salida. Combinacin mxima prevista 1 MCPA + 4 AUMCP.
cod. AUMCP
3.07
2.76
70
30 1.18
78
15 .59
.39
10
Port (A) G1/8" Port (1) G1/8" Port (2) G1/8" Port (3) G1/8" Port (4) G1/8"
2.60
66
3.54
41 1.61
.87
90
3- Interception valve
Vlvula de interceptacin
Standard control panel to charge, adjust and check the pressure in the connected system. It consists of a
plate with pressure gauge, charging and discharging valve, 3 outlets, steel case and can be equipped with a rupture disc (optional).
Panel standard para la carga, regulacin, descarga y control de la presin en sistemas de cilindros conectados.
Consiste en una base con un manmetro Vlvula de carga y descarga, 3 salidas, proteccin en acero.
Puede equiparse con disco de ruptura (opcional).
2.44
80
2.05
74
62
52
18 .71
1.00
25,5
8 .31
16,5
.65
23
.30
7,5
8
.91 8,5 (6x) .33 (6x)
58 8,5 (6x) .33 (6x) .31 79
2.28 Easy Manifold Port 3.11 Port (D) G1/8"
122
Manifold Port
4.80
All dimensions in mm.
All dimensions in inch.
1- 8,5 (6x) - 0.33 (2x) fixing holes 5- Pressure gauge 0 - 620 bar (8 ,990 psi)
8,5 (6x) - 0.33 (2x) orificio de sujecin Manmetro 0 - 620 bar (8 ,990 psi)
4 2
4- Quick coupling for charging Cejn
Acoplamiento rpido para carga Cejn
1
6 3
1.54
39
3.15
80
7/16" -20
1.61
41
.55
14
16,5
13 114 4.49 13 .65
.51 .51 84,5
140 5.51 3.33
16
Max 25 Nm
.63 7/16" -20 UNF
.63
16
.63
16
50 7
1.9
55
Max 25 Nm
2.17 Max 25 Nm 20
.79
cod. RPT-D cod. RPT-M
cod. RPT-R
7/16" -20 UNF
55 2.17 55 2.17
Max 25 Nm
7/16" -20 UNF 7/16" -20 UNF
.63
16
GB Gas cylinders operating in non self-contained mode may be connected to a compensation tank. The principal aim is to limit the
pressure rise within the system to a lower figure than would normally be obtained with standard compression rates. The compensation tank
volume may be easily found using the following formula:
6P N s [;3 s X s 2 2
=
6]
Vp = compensation volume [cm3 and inch3] x = Effective working stroke in [cm and inch]
n = no. of gas cylinders required. R = Ratio between final required pressure and initial pressure of the system.
S = Area of rod (piston for series KE) in [cm2 and inch2] V0 = Initial volume of each cylinder in [cm3 and inch3]
Example:
Force required ~6000 daN (13488 lb) and R = 1,1 (10%). No. of cylinders = 4 Type SC1500-50 (or 2 Type SC3000-50). The compensation
volume required is approximately 1300 cm3 (79.33 in.3). Therefore, the compensation tank required will be type PC-3.
Extra volume in the tank is generally not a problem, and to obtain more accurate volume, extra tanks may be connected in the system
E Los cilindros de gas en funcionamiento no autnomo pueden conectarse a un pulmn de compensacin. El objetivo principal
es limitar la presin del sistema, reducindola a un valor menor que el que normalmente se obtendra con tasas de compresin standard.
El volumen del pulmn de compensacin puede calcularse fcilmente mediante la siguiente frmula:
Vp = n s [;3 s X s 2 2
=
6]
Vp = volumen de compensacin [cm3 y inch3] x = carrera efectiva en [cm y inch]
n = n de cilindros de gas necesarios. R = Cociente entre la presin final necesaria y la presin inicial del sistema.
S = rea del vstago (pistn en la serie KE) en [cm2 y inch2] V0 = Volumen inicial de cada cilindro en [cm3 y inch3]
Ejemplo:
Fuerza necesaria ~6000 daN (13488 lb) y R = 1,1 (10%). N de cilindros = 4 Tipo SC1500-50 ( 2 Tipo SC3000-50). El volumen de
compensacin necesario es de aproximadamente 1300 cm3 (79.33 in.3). Por lo tanto, el pulmn de compensacin ser del tipo PC-3.
Por lo general, un pulmn con volumen extra no constituye problema. Para obtener un volumen ms exacto, puede ser necesario conectar
ms pulmones al sistema.
X *TS -300
HT
D
C
Y
H
30 9 13
1.18 .35 .51 A
L B
*TS -300
DISTRIBUTION BLOCKS
Distribution block - Bloque de distribucin
new code: 39BD06A new code: 39BD10A
75 2.95 150 5.91
19 .75 11 (2x) .43 (2x)
19 .75 11 (2x) .43 (2x)
.28
7
.28
7
.98
25
.98
25
7 (2x)
7 (2x) .28 (2x)
.28 (2x)
25 25 25 30 30 30 30 30
.98 .98 .98 1.18 1.18 1.18 1.18 1.18
.12
.12
3
3
.39
10
10
.39
40 1.57
25 .98
25 .98
1.57
40
60 1 X 45
G1/8" (6x) 56 1 X 45 G1/8" (10x)
2.36
2.20
4,5 .18
.59
15
15
4,5 12 12
.18 .47 .47
M6 (6x)
M6 (6x)
.43
11
.71
1.02
26
18
1.57
40
.43
11
.16
37 1.46 4
4
.16
13,5 18 13,5
.53 .71 .53
35
1.38
D D D D
C -0'05
C -0'05
F
F
0
0
D1 D1 D1 D1
+2
0
+2
0
E1
E1
B
B
E E Hardened
+2 +2
* VDI 3003 A0 A0 Temperado
Code A B C D D1 E E1 F
mm mm mm mm mm mm mm mm Model
inch inch inch inch inch inch inch inch
PS040040 40 40 15 15 9 21 21 10 SC150-500, SCF500, H300-500, HR300-500, HRF500,K40-100, LI400, ML300-500, RV350-500, S500
1.57 1.57 0.59 0.59 0.35 0.83 0.83 0.39
PS056056 56 56 20 18 11 32 32 13 SC750-1500, SCF750, H700-1000, HR700-1500, HRF700,HRF1000, HF700-1000, K180, LI900-1400, ML1000,
2.20 2.20 0.79 0.71 0.43 1.26 1.26 0.51 RV750-1500, RF750-1500, S750-1500
PS071071 71 71 20 18 11 48 48 13 SC3000-5000, H2400-4200,HR2400-4200, K470-750, ML1800-4700, LS1500-2400,
2.80 2.80 0.79 0.71 0.43 1.89 1.89 0.51 RV2400-4200, RF2400, S3000
PS085060* 85 60 15 15 9 66 40 10 SC3000, H2400, HR2400, K470, ML4700, LI3200, LS1500-2400, LS1500-2400, RV2400, RF2400, S3000
3.35 2.36 0.59 0.59 0.35 2.60 1.57 0.39
PS100080* 100 80 20 18 11 72 56 12 SC5000, H4200, HR4200, K750, ML7500, LS3000-4200, RV4200
3.94 3.15 0.79 0.71 0.43 2.83 2.20 0.47
R25
R.98
.28
7
.39
10
22
.87
cod. FA 022
ADVICE PLATE
115
4.53
2.28
58
2.76
70
3 .12
125
4.92
2.20
1.06
56
27
S 24
Max 25 Nm
.12
3
10
.39
G 1/8K
22 .87
.
cod. PMM150A (50 : 150 bar) - 725 : 2 175 psi Pressure switch Operating voltage 48 V AC max Normally opened
.
cod. PMM300A (50 : 300 bar) - 725 : 4 350 psi Presostato Tensin de trabajo 48 V AC max Normalmente abierto
0 - 315 bar gauge - 2 hand grips - discharging valve - G1/8" built in adapter - quick fit male Cejn -
included in the cod. 39DMA set.
3 m high pressure hose - female Cejin quick-fit - ON/OFF valve - hose release valve - 1 1/2 20
UNF coupling for pressure regulator/tank + additional quick coupling (ONLY FOR CPVB - CPVD) -
included in the cod. 39DMA set.
3 mt de tubo - enganche rpido hembra Cejin - vlvula ON/OFF - vlvula de descarga tubo -
1 racor para reductor/bombona de 1 1/2 20 UNF + 1 insercin rpida suplementaria
(SLO PARA CPVB - CPVD) - incluido en el set cod. 39DMA.
1/4" BSP
cod. 39IRFA
A G1/8 M6 M6 M6 M6 M6 M6 G 1/8
Model K180-1830 K75, K100 NE16, NE24 SC150, SC250 K40 HR200 M90 SC500-10000,
Modelo ML1800-12000 HR300 Cu 5-16 HR1000-4200 SCF250, H300 ML300 MCS19 M90 TBM SCF500-750
HR500 Cu 5-16 HRF1000 H500,HF500 MCS19-TBM M90 TBI H700-6600
HR700 Cu 10-16 LI900-2000 HR300 Cu 25-125 MCS19-TBI M90 TEM HF700-1000
HRF300 Cu 5-16 HR500 Cu 25-125 MCS19-TEM M200 HR6600-11800
HRF500 Cu 5-16 HR700 Cu 19-125 MCS25 KE400-7500 LI3200
HRF700 Cu 10-16 HRF300 Cu 25-125 RV350-2400 LS1500-4200
ML500 HRF500 Cu 25-125 ML300-ML500 KE12000-18500
ML1000 HRF700 Cu 19-125 (revB) S500-S3000
LI400 Cu 13 LI400 Cu 25-100 SC (revD) RV4200-RV9500
ML1000 (rev.B) H (revC) RF750-RF2400
ML1800-ML12000(revB)
QDFV01 QDFV03 QDFV02 QDFV03 QDFV02 QDFV02 QDFV02 QDFV01
cod. DDS-...
Discharging adapters.
Dispositivo de descarga.
Ask for or download maintenance and accessories catalogue from our web site www.specialsprings.com.
Less Space
Less Space - Menos espacio
Less Height
Less Height - Menos altura
80
3.15
3.15
80
12.01
305
7.48
190
GB BENEFITS Considerable height reduction for the same working deflection and force.Compact
tool construction.
RESULT Great saving of money.
E VENTAJAS Notable reduccin de la altura de los volmenes con igual fuerza y recorrido.
Construccin ms compacta del molde.
RESULTADO Notable ahorro econmico.
Large Forces
Large Forces - Grandes fuerzas
F0 = 4,2 18 300 daN F0 = 0
F0 = 9.44 41.138 lb daN
Controlled Forces
Controlled Forces - Fuerzas controladas
GB BENEFITS Always the same force on each contact point. Forces may be positioned to exactly
where required. System may be continually monitored for pressure.
RESULTS Constant production conditions of piece-parts. Longer life for punches and tools. Saving of money.
E VENTAJAS Fuerza siempre equilibrada en todos los puntos de contacto. Fuerza posicionable
exactamente donde se precisa en el molde. Visualizacin continua de la presin
RESULTADO Mejor calidad y constante de las piezas moldeadas. Mayor duracin de las herramientas.
Notable ahorro econmico.
Almost Constant
Almost Constant - Prcticamente constante
.
F0 = ~ 2 100 daN (4 721 lb)
.
F1 = ~ 2 300 daN (5 170 lb)
es.:
n.3 H1000 - 50
.
(F0 = ~ 700 daN - 1 574 lb)
PC-1 .
P = 100 bar - 1 450 psi
E VENTAJAS Mejor control del material durante las fases de moldeo y embuticin.
RESULTADO Mejor calidad de las piezas moldeadas. Menores desechos de produccin. Notable ahorro econmico.
Adjustable Forces
Adjustable Forces - Fuerzas regulables
DM
DM
3 $
N2
N2
GB BENEFITS Cylinders applied to provide the real forces required. Assurance of defined forces.
The same cylinder may be re-used for different power application.
RESULTS Flexible usage. Saving of money.
Cu
max 90% Cu
> 90% Cu
GB All Special Springs nitrogen cylinders are designed with a stroke reserve from 1to 3 mm (except M90/TBM-TBI-TEM). Therefore the nominal
value (Cu) is fully applicable. However, it is recommended not to exceed 90% of Cu in practical use in order to avoid the risk of any extra
stroke caused by changes or errors in tools. This would result in irreparable damages to the cylinders and serious danger to personnel.
E Todos los cilindros Special Springs estn dotados de un margen adicional de carrera de 1 3 mm (excepto NE, M90/TBM-TBI-TEM). Esto
significa que el valor nominal Cu es completamente utilizable. De todos modos, no deja de ser aconsejable no superar el 90% de Cu en el
uso prctico, para as prevenir posibles sobrecarreras, causadas por modificaciones o errores en los moldes, con daos irreparables a los cilindros y
graves riesgos de seguridad.
N2
Pmax
GB When charging do NOT exceed the maximum recommended pressure for each model.
bar
E Durante la carga, no superar nunca la presin mxima aconsejada para cada modelo.
GB When discharging using a DDS device, point the gas flow away from operator.
GB Avoid any mechanical tooling or impact on the body and the rod.
100%
Cu < Cu
GB Ensure that the rod is 100% extracted when charging. For cylinders without a threaded hole
on the rod, initially charge to 5 bar (75 psi) to extract the rod completely, then charge to the required.
E Durante la carga, asegurarse de que el vstago sea extrado al 100%. En cilindros con vstago sin
orificio roscado, comenzar con una carga de 5 bar (75 psi) a fin de extraer completamente el vstago.
Slo entonces proseguir cargando hasta alcanzar la presin deseada.
100% Cu
GB Maintenance must only be conducted by qualified personnel. Errors would cause serious injury or
reduce the working life of the cylinders. Before carrying out any work on the system, fully release all
pressure and ensure that the rod is fully retracted into the body.
E El mantenimiento debe ser efectuado nica y exclusivamente por personal cualificado. Cualquier error
podra causar graves riesgos de seguridad o limitar la vida til de los cilindros. Antes de cualquier
reparacin, descargar completamente la presin y asegurarse de que el vstago quede completamente
retrado dentro del cuerpo.
GB Before disposing of a gas spring ensure that all residual pressure is fully exhausted.
E Nunca tirar un cilindro de gas sin antes haber descargado por completo la presin.
GB If a cylinder has structural damage, fully exhaust all pressure before any form of handling.
Always fix the gas springs directly through the threaded holes on the bottom
or with the fixing elements provided
Fijar siempre los cilindros directamente mediante los elementos de sujecin especficos.
When the cylinder active protection SKUDO is missing or has been removed,
adeguately protect all gas springs from contaminants:solid or liquid.
When the cylinder active protection SKUDO is missing or has been removed,
a significant improvement can be obtained with the cylinders mounted upside-down.
Do not confuse the maximum speed with the recommended maximum number of cycles/min,
as indicated in the dagrams for each family of product.
Fo = ? Fo = P S
daN bar cm2
Lb psi in.2
GB To calculate the initial force of each gas cylinder, simply multiply the maximum pressurization (P)
by the area of seal, rod or piston, of the sealing gasket (S).
E Para calcular la fuerza inicial (Fo) de un cilindro de gas, se multiplica la presin mxima de carga (P)
por el rea de estanqueidad, vstago o pistn, de la guarnicin.
Pn = ? daN / lb Fn
bar/psi
cm2 / in.2
S
GB To determine the pressure level required to achieve a force (Fn) different from the nominal (Fo),
simply divide the required force (Fn) by the area of seal, rod or piston, of the sealing gasket .
E Para calcular la presin de carga necesaria a fin de obtener una fuerza (Fn) distinta de la nominal (Fo),
se divide la fuerza pedida (Fn) por el rea de estanqueidad, vstago o pistn, de la guarnicin.
F C
1 C = approx. 0,33% P
34 F = approx. 0,33% P
GB Any variation in temperature in relation to the nominal calculation figure of 20C (68 F),
causes a change in gas pressure (P).
E Toda variacin de la temperatura con respecto al valor nominal de clculo de 20C (68 F),
determina una variacin de la presin del gas (P).
ORDER
GB For cylinders, fixings and any accessories/device: quantity + code (e.g. 8 SC 1500-80-B).
E Para los cilindros, bridas y cualquier otro accesorio/dispositivo: cantidad + cdigo (p.ej. 8 SC 1500-80-B).
GB
a) Model code
b) Revision indicator
h c) Hosed-system version
d) Batch number
e) General info
f) Subject to /PED 97/23/EC
aa aaa-aa b c a+b+c g) Rod Active Safety
bn xxxxx yyyy d h) Over stroke-pressure active safety
OSAS g
OPAS h E
Nominal Initial force 740 daN a) Cdigo de modelo
Max charge 150 bar/2175 psi
Use only gas N2 b) Indicador de revisin
c) Versin conectable a sistema
WARNING
d) Lote de produccin
HIGH PRESSURE INSIDE
Do not modify or damage
e e) Informacin general
vent before service f) Sujeto a marcado CE/PED 97/23/EC
made in Italy g) seguridad activa vstago
specialsprings.com h) seguridad activa ultra carrera y presin
0475 f
3,5
GB The minimum estimated life figures (106) are always approximate and are the fruit of
Cicli 3
practical experience and theoretical calculation. Correct use and optimum working conditions
Cycle will ensure a much longer operating life than indicated.
Hube 2,5
Coups
Ciclos 2
Ciclos
1,5
(x106)
1
0,5
0
E Los valores de duracin mnima (106) representados son siempre orientativos, resultado
1016 25
13
38 50 63 80 100 125 de experimentos prcticos y de clculos tericos. Un uso correcto y unas condiciones de
trabajo idneas garantizan una vida til muy superior a los valores indicados.
Cu mm
160
140
GB The recommended maximum speed (cycles/min) is intended for an extended working life.
120
Faster speeds, even though possible and compliant with correct use, will reduce the working life.
Cicli/min
100 Cycle/min
Hube/min
80
Coups/min
Ciclos/min
60
Ciclos/min
(x106)
40
20
0
E La cadencia mxima aconsejada (ciclos/min) es indicativa para una larga vida til.
1016 25 38 50 63 80 100 125
13
Cu mm
4 160
3,5 140
GB The minimum estimated life and the number of cycles/min are referred to the full use of
3 120 the nominal stroke (Cu). Partial use will result in an increase in these figures.
Cicli 2,5 100 Cicli/min
Cycle Cycle/min
Hube 2 80 Hube/min
Coups Coups/min
1,5 60
Ciclos Ciclos/min
Ciclos 40 Ciclos/min
1
(x106) 20 (x106)
0,5
0
1016 25 38 50 63 80 100 125
0 E La vida til mnima y el nmero de ciclos/min implican el uso de toda la carrera nominal (Cu).
13
Un uso parcial determinar un aumento de los valores indicados.
Cu mm
GB We recommend all die-makers to deliver all tools with the instructions sheets provided with
cylinders and accessories supplied by Special Springs
E Se recomienda a los troquelistas acompaar los troqueles con las instrucciones de los cilindros
y accesorios Special Springs.
GB All cylinders which can be connected to the system and are specifically coded
(_ _ - N / _ _- NA) are supplied without the one- way valve, without pressure and with only
the closure plug of the connection hole (excluding series M). If you wish to convert independent
cylinders into system-connectable cylinders, order the necessary unions and pipes, and
follow the specific instructions for every series published on site www.specialsprings.com.