You are on page 1of 1

Materials OPW 202

Emergency Vents
Cover and body: aluminum
202 SCFH@21/2PSI The OPW 202 Emergency Vent is
Link: Duratuff

designed to prevent an aboveground


(0.17 bar)
Spring: stainless steel 4" 125,000 SCFH @ 2.5 psi storage tank from becoming over-
Sealing surface: 6" 280,000 SCFH @ 2.5 psi pressurized by providing full-bore, high-
Teflon -coated aluminum

8" 455,000 SCFH @ 2.5 psi capacity venting in the event of a fire or
blockage of the OPW 23, 113, 523V, or
623V. The 202 is a vapor-tight, spring-
Features loaded emergency vent. When the AST
u L ightweight Construction Allows builds pressure to 2.5 psi, the spring-
for safe, easy installation on large loaded lid opens full-bore and discharges
aboveground tanks. vapors upward to relieve the pressure.
u Alerts Tank Operators of Possible The lid remains open for inspection to
u S pring-Loaded, O-Ring Sealed Cover Venting Problems When the indicate a problem with the normal
with Teflon-Coated Seat Ensures emergency vent is actuated, the lid tank venting, or if a fire has taken place,
smooth, vapor-tight sealing surface remains open for inspection until until manually reset. The appropriate
and reliable service life. manually reset. The actuation of the 202 Series vent is determined by the
u F ull-Bore, High-Capacity Upward emergency vent indicates abnormal emergency venting capacity requirements
Venting Enables smaller diameter excessive pressure build-up in the tank of the AST and the type of connection at
vents, with higher venting capacity, to due to either a blockage in the normal the tanks emergency vent opening. The
be used on ASTs when compared to tank vent or in the event of a rapid OPW 202 Emergency Vent is available
weighted, mushroom-style vents. expansion of vapors possibly from in 4", 6", and 8" openings with female
a fire. NPT connections.
u Aluminum Cover and Body with
u E asy Vent Reset No extra parts
Stainless Steel Components Ordering Specifications
Corrosion-resistant construction to required. Simply push the vent lid
closed until an audible click is
Flange Mount
protect expensive finish or epoxy Model # in. mm lbs. kg
coatings on ASTs. heard, indicating the vent is back in
202F-0600
operation. (Flange Mount)
8 203 5.2 2.4
u Mounts Vertical or Horizontal.
u UL Listed To satisfy Third Party
accreditation requirements
202 Series Instruction Sheet Order
of many jurisdictions.
Number: H11792M
7
C

Ordering Specifications 2

Model # in. mm lbs. kg 6


1 5
202-0640 4 102 2.05 .95
202-0660 6 152 3.55 1.6 A
202-0680 8 203 5.1 2.3 10
9 8
Dimensions 202 202F Replacement Parts
4" (102mm) 6" (152mm) 8" (203mm) Key Part # Description
in. mm in. mm in. mm 1 H04869RE Break Link
A 2 3/ 8 60 2 3/ 8 60 2 5/ 8 67 2 H06475RE Rivet
B 4 102 5 127 5 7/ 8 149 3 H04981M Cotter Pin
C 6 1/ 2 165 89/16 218 103/4 273 4 H04928 Parts S/A
5 H04929M Screw
B
6 C01288I Bar
7 H04871M Break Pin
Approvals
8 C01289M Gasket
and Listings
9 H04873M O-Ring
10 H06449RE Rivet

9393 Princeton-Glendale Road Hamilton, Ohio USA 45011 Phone: (800) 422-2525 Fax: (800) 421-3297 www.opwglobal.com 225

You might also like