Professional Documents
Culture Documents
Siemens AG 2016
HMI Software
3/59 SIMATIC WinCC flexible HMI system 3/139 WinCC add-ons and
3/59 SIMATIC WinCC flexible ES partner management
3/63 SIMATIC WinCC flexible RT 3/139 Introduction
3/69 SIMATIC WinCC flexible options 3/141 SCADA System
3/70 WinCC flexible /ChangeControl SIMATIC WinCC Open Architecture
3/71 WinCC flexible /Archives 3/141 SIMATIC WinCC Open Architecture V3.14
3/72 WinCC flexible /Recipes 3/154 SIMATIC WinCC Open Architecture
3/73 WinCC flexible /Audit
Add-ons
3/74 SIMATIC Logon for WinCC flexible
3/75 WinCC flexible /Sm@rtAccess 3/160 SIMATIC ProAgent
3/76 WinCC flexible /Sm@rtService process diagnostics software
3/77 WinCC flexible /OPC-Server 3/160 SIMATIC ProAgent
3/78 WinCC flexible /ProAgent
Siemens ST 80 / ST PC 2016
Siemens AG 2016
HMI Software
Introduction
Overview
SIMATIC HMI Efficient to a new level SIMATIC WinCC (TIA Portal)
Creation of applications in the machine-level area and of
Innovative, efficient, scalable and open software for the process visualization or SCADA systems
machine-level area and for SCADA solutions.
SIMATIC WinCC flexible
With the SIMATIC WinCC (TIA Portal), SIMATIC WinCC and Maintenance of visualization solutions in the machine-level
SIMATIC WinCC Open Architecture product families, area:
SIMATIC HMI offers visualization and configuration software for
the entire HMI spectrum, from the machine-level area right up to SCADA system SIMATIC WinCC
SCADA systems: Creation of process visualization or SCADA systems
SCADA system SIMATIC WinCC Open Architecture
Creation of applications with a high demand for customer-
specific adaptations, large and/or complex applications, as
well as projects that demand special system requirements
and functions.
SIMATIC WinCC (TIA Portal)
3
WinCC Professional
Engineering
software
WinCC Advanced
WinCC Comfort
WinCC Basic
G_ST80_XX_00461
WinCC (TIA Portal) is based on the central engineering In addition, WinCC (TIA Portal) offers:
framework Totally Integrated Automation Portal (TIA Portal) Intuitive user interface with maximum degree of operator
which offers users a niform, efficient and intuitive solution to all friendliness
their automation tasks. SIMATIC WinCC (TIA Portal) covers
applications in the machine-level area and applications in the Clear configuration of devices and network topologies
process visualization or SCADA environment. WinCC Shared data management and uniform symbols via controller
(TIA Portal) offers the uniform and scalable configuration tools and HMI
WinCC Basic, Comfort, Advanced and Professional for Optimum interaction with the controller and HMI in a working
configuring the current SIMATIC HMI devices: environment
SIMATIC Basic Panels Powerful editors for efficient engineering
SIMATIC Comfort Panels Integrated mass data operations for efficient configuration
SIMATIC Mobile Panels System diagnostics as an integral component
PC-based systems for the machine-level area Comprehensive library concept
- SIMATIC WinCC Runtime Advanced
- SIMATIC WinCC Runtime Professional
HMI Software
Introduction
Overview (continued)
SIMATIC SCADA systems
The data volume in modern industrial plants is growing continu-
ously and along with it the challenges faced by the SCADA
solutions used: Enormous data volumes must be administered
and archived for the long term. This is accompanied by increas-
ing demands on performance. Technologies, including some
from the consumer environment, are finding their way into indus-
try. Globalization calls for higher-level SCADA systems that can
be used worldwide and the need for mobile access to plant
information is also growing. On top of all these requirements in
these times of ever increasing (energy) costs is the need to
improve energy efficiency and productivity.
With SIMATIC SCADA systems, you are fit for the future
Efficiency
Efficiency: As a key to greater productivity, SIMATIC SCADA
systems combine efficient engineering with high-performance 3
archiving and maximum data security. These features provide
the basis for efficient operations management and intelligent http://www.siemens.com/scada
production analyses.
SCADA system SIMATIC WinCC V7
Scalability
The process visualization or SCADA system for visualizing and
We offer stationary and mobile solutions to cover increasing operating processes, production flows, machines and plants in
demands security guaranteed. In this area, we apply more all sectors from the simple single-user station through to
than 15 years of SCADA know-how from all industry sectors. distributed multi-user systems with redundant servers and
No matter how large or small your request is we have the right cross-location solutions with web clients. WinCC is the informa-
answer. tion hub for company-wide, vertical integration (process visual-
Innovation ization and platform for IT & business integration).
Stay informed with mobile SCADA solutions anywhere and at All HMI functions on-board with industry-standard functions
any time including with existing tablet and smartphone hard- for signaling and acknowledging events, archiving of
ware. The use of multi-touch gestures in the industrial environ- messages and measured values, logging of all process and
ment opens the door for modern operating concepts. configuration data, user administration and visualization
(WinCC basic software).
Openness Company-wide, flexible client/server structures with operator
Due to the support of international standards and system-inter- stations on the Web, distributed servers and data integrity
nal script and programming interfaces, special requests can thanks to redundancy
also be easily implemented. Easy to integrate over standard interfaces such as OPC (OLE
for Process Control), WinCC OLE-DB, VBA (Visual Basic for
Applications), VB script, C-API (ODK)
Integration platform in the company thanks to the Historian
functionality integrated into WinCC based on the Microsoft
SQL Server, standard and programming interfaces and tools
and clients for evaluation
Modular expansion with options and add-ons as well as
individual functional expansions with VB Script, Visual Basic
for Applications, C-API (ODK) and integration of ActiveX
elements.
SIMATIC SCADA and SIMATIC IPCs
Perfect interaction for optimum productivity.
Price advantage as "Package" comprising hardware and
software
System-tested solutions reduce testing overhead
Simple ordering and synchronized logistics
Only if ordered together with the SIMATIC IPC.
http://www.siemens.com/scada-ipc
HMI Software
Introduction
Overview (continued)
SCADA system SIMATIC WinCC Open Architecture PC-based HMI solutions (machine-level / SCADA)
with SIMATIC industrial PCs
The SCADA system SIMATIC WinCC Open Architecture
addresses applications with high demand for customer-specific Our reliable and innovative SIMATIC IPC industrial PCs are the
adaptations, large and/or complex applications, as well as optimal PC hardware platforms. SIMATIC industrial PCs are
projects that demand special system requirements and offered with low-cost software packages. For runtime versions
functions. with SIMATIC WinCC V7, WinCC Runtime Professional or WinCC
Runtime Advanced visualization software products, as well as
SIMATIC WinCC Open Architecture demonstrates its high the SIMATIC WinAC RTX (F) software controller. The simultane-
performance in networked and redundant high-end control ous purchase of industrial PC and software package results in a
systems in particular. From the field level to the control station, price advantage.
from the machine to the company headquarters integrated,
high-performance communication is ensured. In every situation, http://www.siemens.com/pc-based
a high level of availability, reliable information, fast interaction
and user friendliness are guaranteed. Applications can also be
changed without interrupting the process. Profitability, efficiency
and safety are therefore always in equilibrium.
HMI Software
HMI Software in the TIA Portal
Introduction
Overview
SIMATIC WinCC Runtime Advanced visualization software
PC-based HMI solution for single-user systems directly at the
machine
Basic package for visualization, reporting and logging, user
administration, can be expanded flexibly with VB scripts
Basic package expandable by means of option packages
Integration of customer-specific ActiveX Controls created with
WinCC ControlDevelopment
Can be integrated into automation solutions based on TCP/IP
networks
Expanded service concepts with remote operation,
diagnostics and administration over the Intranet and Internet
in combination with email communication
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Engineering
Overview Application
Integrated family of engineering tools for configuring SIMATIC SIMATIC WinCC in the editions Basic, Comfort, Advanced and
HMI operator panels, as well as for the PC-based visualization Professional are innovative engineering tools for configuring
systems WinCC Runtime Advanced and WinCC Runtime SIMATIC HMI operator panels, as well as for the PC-based
Professional. visualization systems WinCC Runtime Advanced and WinCC
WinCC (TIA Portal) is based on the new central engineering Runtime Professional.
framework Totally Integrated Automation Portal (TIA Portal), Depending on the selected product, various target systems can
which offers the user a uniform, efficient and intuitive solution be configured:
to all automation tasks.
WinCC (TIA Portal) also offers uniform engineering from the WinCC Basic
Basic Panel through to SCADA applications. Basic Panels (1st Generation)
Together with the STEP 7 (TIA Portal) products, WinCC Basic Panels (2nd Generation)
(TIA Portal) forms the optimum solution for integrated, efficient
engineering. WinCC Comfort
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Engineering
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Engineering
Function (continued)
Libraries for predefined/user-defined configuration objects System prerequisites
Storage of all configuration objects in the library, e.g. blocks WinCC engineering software
and even entire screens or tags
Faceplates can be constructed from simple screen objects on Processor type Core i5; 3.3 GHz or comparable
a customer-specific or project-specific basis. Changes to (recommended)
these faceplates can be made centrally (block definition).
RAM (recommended) 8 GB
A large number of scalable and dynamizable screen objects
Free hard disk space 2 GB on system drive "C:"
is included in the scope of delivery
Operating systems 32-bit operating systems
Size-scalable graphics for industrial applications are included Windows 7 Home Premium SP1
in the scope of delivery (only WinCC Basic)
Preview function for library objects Windows 7 Professional SP1
Windows 7 Enterprise SP1
Language support Windows 7 Ultimate SP1
64-bit operating systems
Multilingual project creation (max. 32 languages) in editors Windows 7 Home Premium SP1
thanks to selectable views
3
(only WinCC Basic)
Central management of language-specific texts and graphics Windows 7 Professional SP1
Windows 7 Enterprise SP1
in libraries Windows 7 Ultimate SP1
Edit, export and import of texts for translation Windows 8.1 (only WinCC Basic)
Windows 8.1 Professional
Language-specific graphics Windows 8.1 Enterprise
Windows Server 2008 R2 StdE SP1
Visual Basic and C-Script Support (not WinCC Basic)
IntelliSense function for fast programming of access to Windows Server 2012 R2 StdE
runtime objects Screen resolution 1920 x 1080 recommended
Simple creation of control sequences in script code Optical drive DVD-ROM
Visual Basic Script debugging in simulator and WinCC Note:
Runtime Advanced and WinCC Runtime Professional
Opening several instances of WinCC on your engineering PC at
Test and commissioning support the same time may result in more demanding hardware require-
Simulation of HMI projects on engineering PC ments.
Marking of incomplete or incorrect configuration directly in the In addition to WinCC, Windows also requires space on the hard
respective editor disk; e.g. free disk space should be available for the swap file.
Jump to error cause based on alarm messages in the The following formula has proven itself in the past: Size of swap
Compiler file = 3 x size of RAM. For further information, refer to your
Windows documentation
Migration of existing HMI projects
Data transfer in projects from WinCC flexible
Data transfer in projects from WinCC
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Engineering
1)
Current information and availability regarding the new delivery package
can be found at: http://www.siemens.com/tia-online-software-delivery
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Engineering
3
Powerpack 4 096 PowerTags to SIMATIC WinCC Comfort 6AV6612-0AA00-0AL0
max. PowerTags SIMATIC WinCC Advanced 6AV6613-0AA00-0AL0
as download 1) SIMATIC WinCC Professional 6AV2103-0DA00-0AL0
floating license, license key 512 PowerTags
download only, SIMATIC WinCC Professional 6AV2103-0HA00-0AL0
email address required for the 4 096 PowerTags
delivery SIMATIC WinCC Professional 6AV2103-0XA00-0AL0
SIMATIC WinCC Basic to 6AV2101-2AA03-0BJ5 max. PowerTags
SIMATIC WinCC Comfort 2) Software Update Service
SIMATIC WinCC Comfort to 6AV2102-2AA03-0BJ5 (Compact Edition)
SIMATIC WinCC Advanced
SIMATIC WinCC Advanced to 6AV2103-2AD03-0BJ5 The delivery items are combined.
SIMATIC WinCC Professional For several contracts, only 1 pack-
512 PowerTags age with 1 data medium set, 1 USB
flash drive with the corresponding
SIMATIC WinCC Professional 6AV2103-2DH03-0BJ5 number of licenses and the corre-
Powerpack 512 PowerTags to sponding number of CoLs will be
4 096 PowerTags supplied.
SIMATIC WinCC Professional 6AV2103-2HX03-0BJ5
Powerpack 4 096 PowerTags to Delivery items to be combined must
max. PowerTags be ordered as one item.
SIMATIC WinCC Comfort 6AV6612-0AA00-0AM0
SIMATIC WinCC Advanced 6AV6613-0AA00-0AM0
SIMATIC WinCC Professional 6AV2103-0DA00-0AM0
512 PowerTags
SIMATIC WinCC Professional 6AV2103-0HA00-0AM0
4 096 PowerTags
SIMATIC WinCC Professional 6AV2103-0XA00-0AM0
max. PowerTags
Software Update Service
(download) 1)
email address required for the
delivery
SIMATIC WinCC Comfort 6AV6612-0AA00-0AY0
SIMATIC WinCC Advanced 6AV6613-0AA00-0AY0
SIMATIC WinCC Professional 6AV2103-0DA00-0AY0
512 PowerTags
SIMATIC WinCC Professional 6AV2103-0HA00-0AY0
4 096 PowerTags
SIMATIC WinCC Professional 6AV2103-0XA00-0AY0
max. PowerTags
1)
Current information and availability regarding the new delivery package
can be found at: http://www.siemens.com/tia-online-software-delivery
2)
valid only for Article No.'s 6AV2100-0AA03-0AA5 and
6AV2100-0AA03-0AH5
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Engineering
3
PowerTags and WinCC RT
as download 1)
Professional 102 400 PowerTags
floating license, software and
license key download, SIMATIC WinCC RC 153 600 6AV2103-4RX03-0AE5
email address required for the -> WinCC Professional max.
delivery PowerTags and WinCC RT
Professional 153 600 PowerTags
SIMATIC WinCC Basic 6AV2100-3AA03-0AK5
SIMATIC WinCC RC 262 144 6AV2103-4TX03-0AE5
SIMATIC WinCC Comfort 6AV2101-3AA03-0AK5
-> WinCC Professional max.
SIMATIC WinCC Advanced 6AV2102-3AA03-0AK5 PowerTags and WinCC RT
SIMATIC WinCC Professional 6AV2103-3DA03-0AK5 Professional 262 144 PowerTags
512 PowerTags as download 1)
SIMATIC WinCC Professional 6AV2103-3HA03-0AK5 upgrade license, software and
4 096 PowerTags license key download,
SIMATIC WinCC Professional 6AV2103-3XA03-0AK5 email address required for the
max. PowerTags delivery
SIMATIC WinCC RC 128 6AV2103-4BD03-0AK5
WinCC flexible 2008 -> WinCC -> WinCC Professional
V13 SP1 512 PowerTags and WinCC RT
Software and documentation Professional 128 PowerTags
on DVD, SIMATIC WinCC RC 512 6AV2103-4DD03-0AK5
upgrade license, -> WinCC Professional
license key on USB stick 512 PowerTags and WinCC RT
WinCC flexible Compact to 6AV2101-4AB03-0AE5 Professional 512 PowerTags
WinCC Comfort SIMATIC WinCC RC 2 048 6AV2103-4FH03-0AK5
WinCC flexible Standard to 6AV2101-4BB03-0AE5 -> WinCC Professional
WinCC Comfort 4 096 PowerTags and WinCC RT
WinCC flexible Advanced to 6AV2102-4AA03-0AE5 Professional 2 048 PowerTags
WinCC Advanced SIMATIC WinCC RC 8 192 6AV2103-4KX03-0AK5
as download 1) -> WinCC Professional max.
upgrade license, software and PowerTags and WinCC RT
license key download, Professional 8 192 PowerTags
email address required for the SIMATIC WinCC RC 65 536 6AV2103-4MX03-0AK5
delivery -> WinCC Professional max.
WinCC flexible Compact to 6AV2101-4AB03-0AK5 PowerTags and WinCC RT
WinCC Comfort Professional 65 536 PowerTags
WinCC flexible Standard to 6AV2101-4BB03-0AK5 SIMATIC WinCC RC 102 400 6AV2103-4PX03-0AK5
WinCC Comfort -> WinCC Professional max.
PowerTags and WinCC RT
WinCC flexible Advanced to 6AV2102-4AA03-0AK5 Professional 102 400 PowerTags
WinCC Advanced
SIMATIC WinCC RC 153 600 6AV2103-4RX03-0AK5
WinCC V7.0 / V7.2 RC -> WinCC -> WinCC Professional max.
Professional V13 SP1 and PowerTags and WinCC RT
WinCC Runtime Professional V13 Professional 153 600 PowerTags
SP1 SIMATIC WinCC RC 262 144 6AV2103-4TX03-0AK5
Software and documentation -> WinCC Professional max.
on DVD, PowerTags and WinCC RT
upgrade license, Professional 262 144 PowerTags
license key on USB stick
1) Current information and availability regarding the new delivery package
SIMATIC WinCC RC 128 6AV2103-4BD03-0AE5
-> WinCC Professional can be found at:http://www.siemens.com/tia-online-software-delivery
512 PowerTags and
WinCC RT Professional
128 PowerTags
SIMATIC WinCC RC 512 6AV2103-4DD03-0AE5
More information
-> WinCC Professional Further information can be found in the Internet at:
512 PowerTags and
WinCC RT Professional http://www.siemens.com/tia-portal
512 PowerTags
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
Overview
SIMATIC WinCC Runtime Professional visualization
software
PC-based operator control and monitoring system for
visualization and operator control of processes, production
flows, machines and plants in all sectors from the simple
single-user station through to distributed multi-user systems
and cross-location solutions with web clients. WinCC Runtime
Professional is the information hub for corporation-wide
vertical integration.
Industry-standard functions for signaling and acknowledging
events, archiving of messages and measured values, logging
of all process and configuration data, user administration, can
be expanded flexibly with VB and C scripts
Basic package expandable by means of option packages
Also included are APIs for the Runtime to utilize the open
3 programming interfaces
Integration of customer-specific ActiveX Controls created with
SIMATIC WinCC Runtime Advanced visualization software WinCC ControlDevelopment
PC-based HMI solution for single-user systems directly at the For more detailed information, refer to:
machine
http://www.siemens.com/wincc-tia-portal
Basic package for visualization, reporting and logging, user
administration, can be expanded flexibly with VB scripts http://www.siemens.com/wincc-professional
Basic package expandable by means of option packages
Integration of customer-specific ActiveX Controls created with
WinCC ControlDevelopment
Can be integrated into automation solutions based on
TCP/IP networks
Expanded service concepts with remote operation,
diagnostics and administration over the intranet and Internet
in combination with e-mail communication
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Advanced
Overview Design
PC-based HMI solution for single-user systems directly at the SIMATIC WinCC Runtime Advanced is available as a software
machine. SIMATIC WinCC Runtime Advanced is configured with package with 128, 512, 2 048, 4 096 or 8 192 PowerTags.
the SIMATIC WinCC Advanced or SIMATIC WinCC Professional
configuration software. The term PowerTags is used to identify process variables and
area pointers that have a process link to the controller. Variables
without process link, constant limit values of variables, and mes-
Benefits sages (up to 4 000 bit-triggered messages) are also available for
Functions for all visualization tasks: additional system performance. The range of functions of
- Operator functions WinCC Runtime Advanced includes the centralized HMI compo-
- Graphics and trend displays nents for visualizing and reporting, and it can be expanded to
- Alarm logging suit requirements and costs by using optional packages.
- Report system SIMATIC WinCC Runtime Advanced is configured with the
- Archiving (option) SIMATIC WinCC Advanced or SIMATIC WinCC Professional
- Recipe management (option) configuration software.
- Audit Trail (option)
Flexible runtime functionality due to Visual Basic scripts Function
Innovative service concepts with remote operation,
diagnostics and administration via intranet and Internet as Visualization via Windows-compliant user interface 3
well as e-mail communication to increase availability (option) Made up of parameterizable screen objects and faceplates
Support for simple distributed automation solutions based on created on a project-specific basis:
TCP/IP networks at the machine-level (option) Numeric and alphanumeric input/output fields
Part of the Totally Integrated Automation Portal Static text and graphic display plus vector graphics
- Direct access to the tag and message configuration of the
SIMATIC controller Dynamizable graphics from HMI symbol library
- Excellent support of the new SIMATIC S7-1500 controller Bar graph, trend curve graph with scroll and zoom function as
With symbolic addressing well as read line
Access to the new memory-optimized data blocks Signal-specific text and graphic lists
New alarm and diagnostics concept
- Integrated diagnostic functions for increasing productivity Buttons and switches for operator-process communication
Editing fields for process values (signals)
Application Analog display, slider as example for further screen objects
SIMATIC WinCC Runtime Advanced is the high-performance vi- Project-specific faceplates created from basic objects of the
sualization software for simple, machine-oriented visualization system
tasks. It can be used as a single-user solution for all automation Graphic displays for various standard graphic formats,
applications in production automation, process automation and e.g. bitmaps, .jpg, .wmf
building services automation.
Alarms and messages
SIMATIC WinCC Runtime Advanced can be used in combination Discrete alarms and analog alarms as well as event-driven
with the following HMI devices: Alarm-S/Alarm-D message procedure with SIMATIC S7
SIMATIC Panel PC: IPC277D, IPC277E, Panel PC 477B, The new alarm and diagnostics concept of the S7-1500
HMI IPC477C, IPC477D, Panel PC 577B, HMI IPC577C, controller is also supported
Panel PC 677B, HMI IPC677C, IPC677D
Freely-definable alarm classes for definition of acknowl-
SIMATIC Box PC: IPC227D, IPC227E, Box PC 427B, IPC427C, edgment response and display of alarm events
IPC427D, Box PC 627B, IPC627C, IPC627D, Box PC 827B,
IPC827C, IPC827D Logging of alarms and process values 1)
SIMATIC Rack PC: Rack PC 547B, IPC547C, IPC547D, Logging in files (e.g. CSV or TXT file) and Microsoft SQL
IPC547E, Rack PC 647B, IPC647C, IPC647D, Rack PC 847B, databases
IPC847C, IPC847D Online evaluation of process value and alarm logs
SIMATIC S7 Embedded Controller: EC31 Evaluation of process value and alarm logs using standard
SIMATIC S7 Open Controller: ET200SP Open Controller Microsoft tools such as Excel
SINUMERIK PC: PCU 50.3, PCU 50.5 Recipes 1)
Standard PCs with resolutions (W x H in pixels) of: Generation of data records for machine data or production
- 4:3 Format: 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, data
1600 x 1200
- Widescreen format: 800 x 480, 1280 x 800, 1366 x 768, Display or entry of data records via a configurable screen
1440 x 900, 1680 x 1050, 1920 x 1080, 1920 x 1200, object or via process screens distributed within the project
1980 x 1080 Transmission of data records from or to the controller
Import/export of data records from/to CSV files for further
processing with other tools (e.g. MS Excel)
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Advanced
Function (continued)
Documentation of process data, alarm events, and recipes WinCC Sm@rtServer for the remote control via the Intranet
Time or event-driven report output and Internet 1)
User-definable layout Display and control of process screens on remote PC or Panel
A SIMATIC HMI system can be used to control or monitor
Flexible expansion of integrated system function using another system remotely; entry level for client/server configu-
Visual Basic script rations for distributed operator stations or for solutions with
Language support for multilingual projects head end or control room
Up to 32 online languages WinCC ControlDevelopment for extending the functionality
Language-dependent texts and graphics by adding own Controls 1)
Language selection during runtime Development of proprietary VB.net or C# Controls for
integration in SIMATIC WinCC Runtime Advanced
User-oriented access protection according to requirements
of regulated sectors 1)
Option for SIMATIC WinCC Runtime Advanced, runtime licenses must be
Authentication with user ID and password purchased separately. For further information, refer to "WinCC options".
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Advanced
Technical specifications
The following tables of system limitations provide assistance in of configurations that make full use of all system limits on the HMI
estimating whether a specific project is still within the system devices. In addition to the limitations specified, allowances must
limitations for WinCC Runtime Advanced. The stated maximum be made for restrictions in configuration memory resources.
values are not additive. We cannot guarantee proper functioning
3
Number of alarm classes 32
Number of graphic objects 2 000
Number of discrete alarms 4 000
Number of text elements 30 000
Number of analog alarms 500
Scripts
Length of an alarm in characters 80
Number of scripts 200
Number of process values per alarm 8
Communication
Size of the alarm buffer 1 024
Number of connections 8
Number of queued alarm events 500
Number of connections based on 16
Screens "SIMATIC HMI HTTP"
Number of screens 500 Maximum number of connected 44)
Number of fields per screen 400 Sm@rtClients (including a service
client)
Number of tags per screen 400
Help system
Number of complex objects per 40
screen1) Number of characters in a help text 320
Recipes Languages
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Advanced
3
email address required for the
delivery. Single license, software and
128 PowerTags 6AV2104-0BA03-0AH0 license key download.
512 PowerTags 6AV2104-0DA03-0AH0 email address required for the
delivery.
2 048 PowerTags 6AV2104-0FA03-0AH0
128 PowerTags to 128 PowerTags 6AV2105-2BB03-0AJ0
4 096 PowerTags 6AV2104-0HA03-0AH0
512 PowerTags to 512 PowerTags 6AV2105-2DD03-0AJ0
8 192 PowerTags 6AV2104-0KA03-0AH0
2 048 PowerTags to 6AV2105-2FF03-0AJ0
Powerpacks 2 048 PowerTags
4 096 PowerTags to 6AV2105-2HH03-0AJ0
SIMATIC WinCC Runtime
4 096 PowerTags
Advanced V13
(without version change) 8 192 PowerTags to 6AV2105-2KK03-0AJ0
8 192 PowerTags
Single license, license key only on
USB stick for PowerTags from SIMATIC WinCC Runtime
128 PowerTags to 512 PowerTags 6AV2104-2BD03-0BD0 Advanced V13 SP1 to
512 PowerTags to 6AV2104-2DF03-0BD0 SIMATIC WinCC Runtime
2 048 PowerTags Professional ASIA V13 SP1
2 048 PowerTags to 6AV2104-2FH03-0BD0 128 PowerTags to 128 PowerTags 6AV2105-2BB13-0AC0
4 096 PowerTags 512 PowerTags to 512 PowerTags 6AV2105-2DD13-0AC0
4 096 PowerTags to 6AV2104-2HK03-0BD0 2 048 PowerTags to 6AV2105-2FF13-0AC0
8 192 PowerTags 2 048 PowerTags
4 096 PowerTags to 6AV2105-2HH13-0AC0
as download 3)
4 096 PowerTags
Single license, software and 8 192 PowerTags to 6AV2105-2KK13-0AC0
license key download. 8 192 PowerTags
email address required for the
delivery. Update
128 PowerTags to 512 PowerTags 6AV2104-2BD03-0BJ0 SIMATIC WinCC Runtime 6AV2105-0XX03-0DU8
512 PowerTags to 6AV2104-2DF03-0BJ0 Advanced V13 to V13 SP1
2 048 PowerTags
2 048 PowerTags to 6AV2104-2FH03-0BJ0 Software and documentation on
4 096 PowerTags DVD, including options software
(only DVD, without license key)
4 096 PowerTags to 6AV2104-2HK03-0BJ0
8 192 PowerTags
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Advanced
More information
Further information can be found in the Internet at:
http://www.siemens.com/tia-portal
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Professional
Overview Design
PC-based operator control and monitoring system for SIMATIC WinCC Runtime Professional is available as a software
visualization and operator control of processes, production package with 128, 512, 2 048, 4 096, 8 192, 65 536, 102 400,
flows, machines and plants in all sectors from the simple 153 600 and 262 144 PowerTags.
single-user station through to distributed multi-user systems
and cross-location solutions with web clients. PowerTags are data points that are connected to controllers or
other data sources via a WinCC Runtime Professional channel.
SIMATIC WinCC Runtime Professional is the information hub for Up to 32 alarms can be obtained from one data point. Moreover,
corporation-wide vertical integration. SIMATIC WinCC Runtime internal tags without coupling are available for additional system
Professional is configured with the SIMATIC WinCC Professional performance. WinCC Runtime Professional also contains
configuration software. 500 archive tags. Additional archive licenses can be obtained
for greater quantity structures.
Benefits Licenses for a multi-user configuration
Functions for all visualization tasks: The system software with the required number of PowerTags and
- Operator functions additionally the SIMATIC WinCC Server for Runtime Professional
- Graphics and trend displays option must be installed on the server. For the clients in the basic
- Alarm logging
3
configuration, a SIMATIC WinCC Client for Runtime Professional
- Report system license is sufficient.
- Archiving (option)
Function
- Recipe management (option)
Universally scalable
- Expandable from single station to client-server Visualization via Windows-compliant user interface
configurations
- Process visualization via the web with the WinCC Made up of parameterizable screen objects and faceplates
WebNavigator created on a project-specific basis:
Open standards for easy integration Numeric and alphanumeric input/output fields
- Efficient real-time database MS SQL Server Static text and graphic display plus vector graphics
- Open for application modules with ActiveX controls Dynamizable graphics from HMI symbol library
- Visual Basic for Applications for individual expansions
- OPC for cross-vendor communication Bar graph, trend curve graph with scroll and zoom function as
well as read line
Part of the Totally Integrated Automation Portal
- Direct access to the tag and message configuration of the Signal-specific text and graphic lists
SIMATIC controller Buttons and switches for operator-process communication
- Excellent support of the new SIMATIC S7-1500 controller Editing fields for process values (signals)
With symbolic addressing
Access to the new memory-optimized data blocks Analog display, slider as example for further screen objects
New alarm and diagnostics concept Project-specific faceplates created from basic objects of the
- Integrated diagnostic functions for increasing productivity system
Graphic displays for various standard graphic formats,
Application e.g. bitmaps, .jpg, .wmf
SIMATIC WinCC Runtime Professional is designed for visualiza- Alarms and messages
tion and operation of processes, manufacturing cycles, Discrete alarms and analog alarms, as well as event-driven
machines and plants. With its powerful process interface, Alarm-S/Alarm-D message procedure with SIMATIC S7
especially to the SIMATIC family, and the secure data logging,
WinCC Runtime Professional enables solutions for the process The new alarm and diagnostics concept of the S7-1500
control. controller is also supported
Freely-definable alarm classes for definition of acknowl-
The sector-neutral basic system enables universal usage in all
edgment response and display of alarm events
automation applications.
SIMATIC WinCC Runtime Professional can be used in Logging of alarms and process values 1)
combination with the following HMI devices: Signaling system for detecting and archiving events with
display and control options according to DIN 19235
SIMATIC PCs:
Process logging for the acquisition, compression and storage
SIMATIC Panel PC: HMI IPC477C (Client), IPC477D (Client), of measured values
Panel PC 577B, HMI IPC577C (Client), Panel PC 677B,
HMI IPC677C Online evaluation of process value and alarm logs
SIMATIC Box PC: IPC427C, IPC427D, Box PC 627B, 1)
Option for SIMATIC WinCC Runtime Professional; runtime licenses must be
IPC627C, IPC627D, IPC827C, IPC827D purchased separately. For further information, refer to "WinCC options".
SIMATIC Rack PC: PC 547B, IPC547C, IPC547D, IPC547E,
PC 647B, IPC647C, IPC647D, PC 847B, IPC827C, IPC827D
Standard PC
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Professional
Function (continued)
Recipes 1) Language support for multilingual projects
Generation of data records for machine data or production Language-dependent texts and graphics
data Language selection during runtime
Display or entry of data records via a configurable screen
object or via process screens distributed within the project Onboard controller connection to many different controllers
Transmission of data records from or to the controller Communication via native drivers and standard OPC channel
Import/export of data records for further processing with other For communication with subordinate controls (SIMATIC
tools (e.g. MS Excel) protocols, PROFIBUS DP, PROFIBUS FMS, DDE and OPC
server included in the scope of delivery)
Documentation of process data, alarm events, and recipes
WinCC ControlDevelopment for extending the functionality
Time or event-driven report output by adding own Controls 1)
User-definable layout Development of proprietary VB.net or C# Controls for
Flexible expansion by means of Visual Basic Script and integration in WinCC Runtime Professional
ANSI-C
3
1)
Option for SIMATIC WinCC Runtime Professional; runtime licenses must be
Programming interfaces for individual access to data and purchased separately. For further information, refer to "WinCC options".
functions of WinCC Runtime Professional and for the
integration in user programs with VBA, VB Script, C-API,
C-Script (ANSI-C) System prerequisites SIMATIC WinCC Runtime Professional
Open communication between HMI systems and with Processor type (min.) 1) Windows 7 (32-bit): 3.5 GHz P4 or
comparable, dual core
higher-level systems
Windows Server 2008: 3 GHz P4 or
OPC-Server comparable, dual/multi core
Use of the visualization system as a data server (OPC Server)
RAM (min.) 2) 2 GB
for higher-level automation components such as control
systems or systems in the office sector Free hard disk space 3) 2 GB on system drive "C:"
- OPC-DA-Server: tags, e.g. process values Operating systems 32-bit operating systems
- OPC-HDA-Server: logged process values Windows 7 Professional SP1
- OPC-A&E-Server: Alarms Windows 7 Enterprise SP1
- OPC-XML-DA-Server: tags, e.g. process values Windows 7 Ultimate SP1
- OPC-UA-DA Server: tags, e.g. process values 64-bit operating systems
Windows 7 Professional SP1
OLE DB Server Windows 7 Enterprise SP1
- Standardized and user-friendly access to WinCC log data Windows 7 Ultimate SP1
(MS SQL Server 2005). Windows 8.1 Professional
- Access is via the OLE-DB Provider supplies all WinCC log Windows 8.1 Enterprise
Windows Server 2008 R2 StdE SP1
data available along with the accompanying process values, Windows Server 2012 R2 StdE
as well as alarm and user texts.
- The WinCC OLE-DB provider also supports analysis Graphics card 32 MB RAM, 24 bit color depth
functions such as minimum, maximum, alarm hit list, etc. Network Ethernet 10 Mbit/s or higher
WinCC WebNavigator for Runtime Professional 1) Optical drive DVD-ROM
- Option for SIMATIC WinCC Runtime Professional for 1)
operating and monitoring plants over the Internet, company In combination with options, more powerful systems may be required
2) The required RAM is determined primarily by the size of the graphics used.
Intranet or LAN.
- Configuration from a web server with the SIMATIC WinCC 3)
Without taking archives into account.
Runtime Professional software as a single-user, client or
server version and a web client that enables operator control Note:
and monitoring of a current WinCC Runtime Professional
project via an Internet browser with ActiveX support. The In addition to WinCC, Windows also requires space on the hard
WinCC basic system does not have to be installed on the disk; e.g. free disk space should be available for the swap file.
client computer. The following formula has proven itself in the past: Size of swap
file = 3 x size of RAM. For further information, refer to your
WinCC DataMonitor for Runtime Professional 1)
Windows documentation.
- The WinCC DataMonitor is used for displaying and evalu-
ating current process states and historical data on office PCs
using standard tools such as Microsoft Internet Explorer or
Microsoft Excel. The DataMonitor Client is supported by a
web server with current and historic process data and
alarms. All staff ranging from machine operators to corporate
managers can use the DataMonitor to obtain information.
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Professional
Integration
Integration in company-wide solutions Access. Just as important: Visual Basic Scripting (VBS) as an
(IT and business integration) easy-to-learn, open Runtime language. If desired, professional
application developers can also use ANSI-C.
WinCC Runtime Professional is strictly based on Microsoft tech-
nology, which provides for the greatest possible compatibility WinCC Runtime Professional integrates a powerful and scalable
and integration ability. ActiveX and .net Controls support tech- Historian function based on the Microsoft SQL Server in the
nology and sector-specific expansions. Cross-manufacturer basic system. Thus the user is given all possibilities: from high-
communication is also a simply exercise. The reason: WinCC performance archiving of current process data, to long-term
Runtime Professional can be used as an OPC client and server, archiving with high data compression, through to a central infor-
and in addition to access to current process values, it also mation turntable in form of a company-wide Process Historian.
supports standards such as OPC HDA (Historical Data Access), Open interfaces form the basis for an effective IT and business
OPC Alarm & Events, OPC UA Data Access and OPC XML Data integration.
Technical specifications
The following tables of system limits provide assistance in We cannot guarantee proper functioning of configurations that
make full use of all system limits on the HMI devices.
3
estimating whether a specific project is still within the system
limitations for WinCC Runtime Professional. The stated maximum In addition to the limitations specified, allowances must be made
values are not additive. for restrictions in configuration memory resources.
1) 6)
Limited by system resources. The sum of the number of recipe elements and number of data records
2)
On single-user station or server or on client per server if must not exceed a value of 320,000.
7)
"LongTimeArchiveConsistency" is set to "No". On single-user station, Dependent on the Logging PowerPack used for the log tags. 500 log tags
server, or client if "LongTimeArchiveConsistency" is set to "Yes". are contained in the basis version.
3) 8)
On single-user station or server or on client per server. If the server is also used as an operating unit, the number of clients for this
4) The number and complexity of the objects affect the performance. server is reduced to four.
9) Mixed configuration: 32 Clients + 3 Web Clients
5) Limited by system resources.
10) Mixed configuration: 50 Web Clients + 1 WinCC Client
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Professional
1)
Runtime licenses for WinCC Runtime Professional options must be
purchased separately for each target system.
3)
Current information and availability regarding the new type of delivery can
be found at: http://www.siemens.com/tia-online-software-delivery
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Professional
More information
Further information can be found in the Internet at:
http://www.siemens.com/tia-portal
http://www.siemens.com/wincc-professional
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Communication
Overview
Communication SIMATIC WinCC Runtime Advanced Protocol Description PC interface
WinCC Advanced is an open visualization system and offers the Third-party controllers (from WinCC V11.0) 3)
option of connecting the most diverse control systems. Allen Bradley Channel for communication with max. CP 1612 A2
Number of connectable controllers Ethernet IP 4 x Allen Bradley controllers via
Ethernet TCP/IP with Allen Bradley
WinCC Advanced permits the parallel coupling of up to Ethernet IP protocol
The controllers ControlLogix /
8 controllers. CompactLogix, SLC500 / MicroLogix
Connection to third-party controllers and PLC5 are supported
The following "Coupling overview" table includes lists of Allen Bradley DF1 Channel for communication with Allen COM1/COM2
third-party protocols and controllers which are directly Bradley controllers via DF1 protocol
supported by WinCC Advanced. Generally it is also possible The controllers SLC500 / MicroLogix
and PLC5 are supported 3)
to connect third-party controllers via OPC (OLE for Process
Control). Mitsubishi MC Channel for communication with max. CP 1612 A2
TCP/IP 4 x Mitsubishi controllers via Ethernet
Current notes and information about OPC servers from many TCP/IP with Mitsubishi MC TCP/IP
different suppliers can be found at:
3
protocol
http://www.opcfoundation.org/ The FX3, Q, and iQ/QnUD controller
series are supported
WinCC Advanced supports the standards: Mitsubishi FX Channel for communication with COM1/COM2
OPC Data Access 2.05a Mitsubishi controllers via FX protocol
The FX1N, FX2N controllers are
OPC UA Data Access 1.01 supported
OPC XML Data Access 1.00 (client via DCOM/XML gateway) Modbus TCP/IP Channel for communication with max. CP 1612 A2
4 x Modicon controllers via Ethernet
Coupling overview for WinCC Runtime Advanced TCP/IP using the Modbus TCP/IP
protocol
Protocol Description PC interface The Quantum, Momentum, Premium,
TSX Micro, Compact and M340
SIMATIC HMI controllers are supported
Ethernet TCP/IP HTTP communication for data CP 1612 A2 Modbus RTU Channel for communication with COM1/COM2
(HTTP exchange between SIMATIC HMI Modicon controllers via the Modbus
communication) (client + server) 1) RTU protocol
SIMATIC S7 The Quantum, Momentum, and
Compact controllers are supported
Ethernet TCP/IP Channel for communication via CP 1612 A2
(S7 communication) Ethernet TCP/IP with max. CP 1613 A2 Omron Link / Channel for communication with COM1/COM2
8 x SIMATIC S7 controllers CP 1623 Multi Link Omron controllers via the Link/
S7-1200, S7-1500 Multi protocol
S7-300, S7-400, The CP1x, CJ1x, CJ2H, CS1x, and
S7-200 with CP 243-1 CP2MC controllers are supported
MPI, PROFIBUS Channel for communication via CP 5611 A2 Cross-vendor
(S7 communication) MPI, PROFIBUS with max. CP 5612 OPC client 1) 4) Channel for OPC communication, CP 1612 A2
8 x SIMATIC S7 controllers CP 5621 for OPC DA, WinCC can acquire data from OPC
S7-1200 with CM 1243-5 (DP master), CP 5622 OPC UA DA, server applications
S7-1500 CP 5711 XML DA
CP 5613 A2
S7-300, S7-400, CP 5613 A3 OPC server Server applications for OPC communi- CP 1612 A2
S7-200 (passive S7-200 only) CP 5623 for OPC DA cation; WinCC provides process data
to OPC clients
PPI Channel for communication via CP 5611 A2
(PPI protocol) PPI with CP 5612 1) HTTP and OPC communication can be used in combination with the other
1 x SIMATIC S7-200 CP 5621 couplings; regarding SIMATIC Panels that support HTTP or OPC commu-
(network operation, e.g. parallel PG CP 5622 nication, see the overview under "System interfaces (WinCC V11)".
possible) CP 5711 2) "SINUMERIK Operate WinCC RT Advanced" license required; for further
CP 5613 A2
information, see NC 60 Catalog.
CP 5613 A3
3) For detailed information regarding supported controllers, see "System
CP 5623
interfaces (WinCC V11)"
Software interface Channel for communication via 4)
(S7 communication) software interface with WinAC Application note: Parallel use of the OPC client channel allows, for
example, connection to an SNMP OPC Server for visualization of the data
SINUMERIK 2) present there. The SNMP OPC Server enables monitoring of any network
components (e.g. switches) that support the SNMP protocol. Further
Ethernet TCP/IP Channel for communication via CP 1612 A2 information can be foundunder SIMATIC NET communications systems/
(S7 communication) Ethernet TCP/IP CP 1613 A2 SNMP OPC Server.
with SINUMERIK 840D sl CP 1623
MPI Channel for communication via CP 5611 A2
(S7 communication) MPI with SINUMERIK 840D sl CP 5612
CP 5621
CP 5622
CP 5711
CP 5613 A2
CP 5613 A3
CP 5623
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Communication
Overview (continued)
Communication SIMATIC WinCC Runtime Professional Coupling overview for WinCC Runtime Professional
WinCC Professional is an open process visualization system and Protocol Description PC interface
offers the option of connecting the most diverse control systems.
SIMATIC S7
Released communication software SIMATIC S7 Protocol Suite with channel units for CP 5611 A2
Only communication software with the listed (or higher) product communication with SIMATIC S7 via CP 5612
Ethernet TCP/IP
versions should be used. Corresponding SIMATIC NET (S7 communication) to CP 5621
upgrades are available for the upgrading of older versions. S7-1200, S7-1500, S7-300, S7-400 CP 5622
MPI, PROFIBUS
Number of connectable controllers (S7 communication) to CP 5711
S7-1200 with CM 1243-5 (DP master), CP 5613 A3
With CP 1613 A2/CP 1623, a maximum of 64 S7 controllers can S7-1500, S7-300, S7-400
be connected via Industrial Ethernet; with CP 5612/CP 5622 a CP 5623
Software interface
maximum of 8 and with CP 5613 A3 a maximum of 44 S7 control- (S7 communication) to Win AC
lers via PROFIBUS. With approx. 10 or more controllers, the use Non-Siemens controllers (from WinCC V11.0)
of Industrial Ethernet is recommended.
Allen Bradley Channel for communication with Allen CP 1612 A2
3 Client-server communication
Communication between the clients and the server is
Ethernet IP Bradley controllers via Ethernet TCP/IP
with Ethernet IP protocol
The controllers ControlLogix /
implemented using the TCP/IP protocol. The construction of CompactLogix,
a separate PC-LAN is recommended. For small projects with SLC500 / MicroLogix, and PLC5 are
correspondingly small message frame advent, a SIMATIC NET supported
Industrial Ethernet can be used for both process communication Mitsubishi MC Channel for communication with CP 1612 A2
(WinCC/server PLC) and for PC-PC communication TCP/IP Mitsubishi controllers via Ethernet
(WinCC/client WinCC/server) TCP/IP with Mitsubishi MC TCP/IP
protocol
Connection to third-party controllers The FX3, Q, and iQ/QnUD controller
series are supported
The following "Coupling overview" table includes lists of Modbus TCP/IP Channel for communication with CP 1612 A2
third-party protocols and controllers which are directly Modicon controllers via Ethernet
supported by WinCC Professional. Generally it is also TCP/IP using the Modbus TCP/IP
possible to connect third-party controllers via OPC protocol
(OLE for Process Control). The Quantum, Momentum, Premium,
TSX Micro, Compact and M340 con-
Current notes and information about OPC servers from many trollers are supported
different suppliers can be found at: Cross-vendor
http://www.opcfoundation.org/
OPC client 1) Channel for OPC communication, CP 1612 A2
WinCC Professional supports the standards: for OPC DA, WinCC can acquire data from OPC
OPC XML DA server applications
OPC Data Access 2.05a
OPC server Server applications for OPC communi- CP 1612 A2
OPC Data Access 3.00 for OPC DA, cation; WinCC provides process data
OPC UA Data Access 1.01 OPC UA DA, to OPC Clients
OPC XML DA,
OPC XML Data Access 1.00 OPC A&E,
OPC HDA
OPC HDA 1.20
1) Application note: Parallel use of the OPC client channel allows, for
OPC A&E 1.10
example, connection to an SNMP OPC Server for visualization of the data
present there. The SNMP OPC Server enables monitoring of any network
components (e.g. switches) that support the SNMP protocol. Further infor-
mation can be found under SIMATIC NET communications systems/
SNMP OPC Server.
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Communication
Overview (continued)
Communications examples
Industrial Ethernet
SIMATIC S7-400
WinCC
Runtime
Advanced
PROFIBUS 3
SIMATIC S7-300
SIMATIC S7-1200
G_ST80_XX_00469
WinCC Runtime Advanced single-user system
Industrial Ethernet
WinCC RT
Professional
Server
PROFIBUS
G_ST80_XX_00471
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Communication
Overview (continued)
OPC Client
WinCC RT
Professional
Industrial Ethernet
OPC Server
3 WinCC RT
Advanced
PROFIBUS
G_ST80_XX_00470
SIMATIC S7-300
SIMATIC S7-1200
OPC coupling
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) Runtime
WinCC Runtime Communication
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
Overview
Options for SIMATIC Panels, SIMATIC WinCC Runtime SIMATIC WinCC Sm@rtServer
Advanced and SIMATIC WinCC Runtime Professional for SIMATIC Panels and SIMATIC WinCC Runtime Advanced
SIMATIC WinCC Recipes Flexible solution for location-independent access to
for SIMATIC WinCC Runtime Advanced and HMI systems
SIMATIC WinCC Runtime Professional Remote maintenance of machines and plants via the
Generation and management of data records for machine or Internet/intranet
production data Reduced downtimes for machines and plants due to direct
Display or entry of data records via a configurable screen remote access
object or via process pictures distributed within the project Flexible solution for location-independent access to machines
Transmission of data records from or to the PLC and plants
Import/export of data records for further processing with other SIMATIC WinCC Server and SIMATIC WinCC Client
tools (e.g. MS Excel) for SIMATIC WinCC Runtime Professional
SIMATIC WinCC Logging For setting up a high-performance client-server system
for SIMATIC WinCC Runtime Advanced and
3 SIMATIC WinCC Runtime Professional
A number of coordinated HMI stations can be operated in a
single group with networked automation systems
Logging of alarms and process values Client/server solution:
Online evaluation of process value logs and alarm logs - One server supplies up to 32 connected clients with process
Evaluation of process value and alarm logs using standard MS and archive data, alarms, screens and reports.
tools such as Excel SIMATIC WinCC Redundancy
SIMATIC WinCC Audit for SIMATIC WinCC Runtime Professional
for SIMATIC Panels and SIMATIC WinCC Runtime Advanced For configuring a high-performance, fail-safe client-server
Recording of operator actions in an audit trail system. One WinCC/Redundancy package is required for each
Electronic signature for important user actions relevant to redundant pair of servers.
production SIMATIC Information Server 2014
Audit supports users in meeting special quality requirements, for SIMATIC WinCC Runtime Professional
e.g. The SIMATIC Information Server 2014 is an open, Web-based
- Production plants requiring validation according to reporting system for interactive areas. Reports can be used in
FDA 21 CFR Part 11 Internet Explorer, for Excel, Word or PowerPoint, as well as for
- In respect of traceability according to EU 175/2002 Adobe Reader (pdf). The SIMATIC Information Server has
(EU directive) access to archived process values and messages, and can be
SIMATIC Logon used either directly in conjunction with WinCC / WinCC/RT
for SIMATIC Panels, SIMATIC WinCC Runtime Advanced Professional / PCS7 OS as well as with SIMATIC Process
and SIMATIC WinCC Runtime Professional Historian 2014.
Creates user administration on a central computer to which For more detailed information on the SIMATIC Information Server
one or more WinCC stations can be connected over Ethernet. and article numbers, see SCADA System SIMATIC WinCC.
With each logging-on/off of a user on one of the connected http://www.siemens.com/simatic-information-server
stations, SIMATIC Logon checks whether a user password has
been created and that the required privileges exist.
SIMATIC Logon supports the user in combination with the
Audit option in meeting requirements in accordance with
FDA 21 CFR Part 11 and EU178.
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
Overview (continued)
SIMATIC Process Historian 2014 SIMATIC WinCC WebNavigator
for SIMATIC WinCC Runtime Professional for SIMATIC WinCC Runtime Professional
The SIMATIC Process Historian 2014 is a powerful, long-term Operator control and monitoring of plants via the Internet or
archive server solution that stores the WinCC process values the in-house intranet/LAN
and messages in a central database. The system offers full Web Client permits the operator control and monitoring of a
scalability for performance and scope. It records and stores current WinCC Runtime Professional project via an Internet
data from one or more WinCC, WinCC/RT Professional and browser with ActiveX support
PCS 7 projects. The number of connected single stations,
servers, or redundant server pairs is unrestricted. SIMATIC SIMATIC WinCC DataMonitor
Process Historian is designed for use throughout your plant, and for SIMATIC WinCC Runtime Professional
is positioned below the corporate management level Display and analysis of current process states and historical
(ERP, MES). data on office PCs with standard tools
For more detailed information on the SIMATIC Process Historian Information can be individually compiled online during
and article numbers, see SCADA System SIMATIC WinCC. runtime via the Internet/intranet.
http:www.siemens.com/simatic-process-historian SIMATIC WinCC ControlDevelopment
for SIMATIC WinCC Runtime Advanced and
SIMATIC WinCC Runtime Professional 3
Expansion of the basic functionality with proprietary controls
Development of proprietary VB.net or C# controls for
integration in WinCC Runtime Advanced and WinCC Runtime
Professional
Overview of the individual options
Options WinCC RT Advanced WinCC RT Professional SIMATIC Panels
WinCC Recipes -
WinCC Logging -
WinCC Audit -
SIMATIC Logon
WinCC Sm@rtServer -
WinCC Server/WinCC Client - -
WinCC Redundancy - -
SIMATIC Information Server - -
SIMATIC Process Historian - -
WinCC WebNavigator - -
WinCC DataMonitor - -
WinCC ControlDevelopment -
Possible
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Recipes
Overview Function
Input of data records (e.g. operating parameters of a
machine, production data for a plastics machine) on the
HMI device as well as their storage and transfer to the control
Display or entry of data records via a configurable screen
object or via several process screens distributed within the
project
The data record elements are coupled with the process via a
direct tag connection
Transmission of data records from or to the controller
Powerful interfaces enable a synchronized data exchange
with the controller.
Storage of data records on local data carriers or on remote
data servers via networks
Logging of data records, e.g. as batch report/shift report
Benefits
Generation and management of machine parameters and
production data on the basis of data records, and exchange
with the automation device, e.g. with the machine.
Clear tabular representation of the data elements with the aid
of a configurable screen object, or depiction in technological
relationships across several process screens.
Simple operator guidance through standard functions.
Export/import of data records for further processing with other
tools (e.g. MS Excel)
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Recipes
3
values license key only on USB stick
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Logging
Overview Application
Transfer of the logs for evaluation and long-term archiving
Detection of recurring error states
Optimization of maintenance cycles
Ensuring the quality standard
Quality assurance and checking the utilization of production
sequences
Documentation of process sequences
Function
Time-controlled as well as manual or process-controlled
swapping out of process data and alarms for long-term
archiving
During runtime, swapped out data are read in and selectively
3
analyzed using WinCC Runtime Professional
- Presentation and evaluation of archived process data based
on a configurable trend display. Reading of the values is
Option for SIMATIC WinCC Runtime Advanced and WinCC
facilitated by a read line.
Runtime Professional for logging process values and alarms
- Presentation and evaluation of archived alarms based on a
Logging of process values and alarms supports the acqui- configurable alarm view.
sition and processing of process data from an industrial plant - User-friendly navigation in the logs
or machine. Evaluation of the logged process data provides
External evaluation of the logs using MS standard tools
information about the operating states of the plant or machine
Various log types are supported: sequence and circular logs
Licensing:
- SIMATIC Panels / Multi Panels / Comfort Panels: Logging of process values and alarms on external,
No license is required. Windows-supported storage media
- WinCC Runtime Advanced: - SIMATIC Panels and WinCC Runtime Advanced:
One license is required per operator station CSV files, RDB files, Microsoft SQL Server via ODBC
- WinCC Runtime Professional: - WinCC Runtime Professional: Microsoft SQL Server 2005
500 Logging Tags are already included in the basic package Powerful standard functions permit user-friendly and flexible
The number of Logging Tags can be increased by means of utilization of the logs
additional licenses
Benefits
Alarm and process value logs enable predictive diagnostics,
which avoids downtimes
Early detection of danger and fault conditions
Increase of the product quality and the productivity thanks to
regular analysis of the alarm and process value logs
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Logging
Max. number of entries per log 500.000 1) SIMATIC WinCC Recipes + 6AV2107-0HA00-0BB0
(incl. sequence log) Logging for Runtime Advanced 1)
Single license per option,
Log types Circular logs, license key only on USB stick
sequence logs (max. 400 per log)
SIMATIC WinCC Logging
Data storage format CSV (Comma Separated Variable), for Runtime Professional
RDB (Runtime Data Base), 1500 Logging Tags
3
Microsoft SQL database (database
not included in scope of delivery) Single license, 6AV2107-0GB00-0BB0
license key only on USB stick
1) Dependent on memory medium used
as download 2)
6AV2107-0GB00-0BH0
WinCC Logging Single license,
for Runtime Professional license key download only
e-mail address required for the
The values specified are maximum delivery
values
SIMATIC WinCC Logging
Number of logs per single-user 100 for Runtime Professional
station/server 5000 Logging Tags
Archivable data Process values, alarms Single license, 6AV2107-0GD00-0BB0
license key only on USB stick
Measured values per second, max. Server/single-user station:
5 000 per sec. as download 2) 6AV2107-0GD00-0BH0
2) Single license,
Log tags per single-user station/ 8.000 license key download only
server e-mail address required for the
Log types Circular log with and without long-term delivery
logging SIMATIC WinCC Logging for
Data storage format Microsoft SQL 2008 database Runtime Professional Powerpack
1500 -> 5000 LoggingTags
Single license, 6AV2107-2GD00-0BD0
license key only on USB stick
as download 2) 6AV2107-2GD00-0BJ0
Single license,
license key download only
e-mail address required for the
delivery
WinCC Logging Upgrade 6AV2107-4GX00-0BF0
for SIMATIC WinCC Archives V7.0
(10 licenses)
Single license per option,
license key only on USB stick
2) 1)
Dependent on the Logging PowerPack used for the log tags. 500 log tags One license is required for each operator console. A license is not required
are contained in the basis version. for the engineering system for configuring the runtime option.
2)
Current information and availability regarding the new delivery package
can be found at: http://www.siemens.com/tia-online-software-delivery
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Audit
Benefits
Audit supports the user in meeting special quality require-
ments, e.g.
- Production plant requiring validation according to
21 CFR Part 11 FDA 1)
- In respect of traceability according to EU 175/2002 2)
The entries in the audit trail are uniquely assigned to users.
This means that responsibilities are clearly identifiable.
The audit trail, stored as a CSV file 3), can be checked via a
security mechanism to find out if subsequent changes have
been made.
For particularly important user actions, e.g., starting
production or loading new recipes, electronic signatures and
comments can be configured and then called up and logged
during runtime.
1)
The FDA (Food and Drug Administration) is the American public health
body
2)
21 CFR Part 11- law on plant validation
3)
CSV Comma Separated Values
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
SIMATIC Logon
Overview Benefits
Centralized configuration of all access authorizations of a
distributed system avoids unnecessary travel times.
Time-consuming multiple configurations for each individual
local station become unnecessary. Accordingly, users can be
easily configured from a central location.
All access data apply throughout the plant on every
connected station. Additional access data on local
subsystems is no longer necessary.
Design
SIMATIC Logon for Panels and WinCC Runtime Advanced
SIMATIC Logon and SIMATIC Logon Remote Access are in-
Option for connecting SIMATIC Panels and PCs with stalled on a central station.
SIMATIC WinCC Runtime Advanced as well as WinCC
Runtime Professional to a central user administration. The following Runtime stations are connected to the central sta-
Creates user administration on a central computer to which
one or more panels or WinCC stations can be connected over
tion via the Ethernet network:
PCs with WinCC Runtime Advanced
3
Ethernet. SIMATIC Panels from the 177 series or higher
With each logging-on/off of a user on one of the connected (with Ethernet interface)
stations, SIMATIC Logon checks whether a user password has SIMATIC Mobile Panels from the 177 series or higher
been created and that the required privileges exist. (with Ethernet interface)
SIMATIC Logon for Panels and WinCC Runtime Advanced SIMATIC Multi Panels
All users of the SIMATIC Panels or WinCC Runtime Advanced SIMATIC Comfort Panels
stations can be managed plant-wide from a central location
SIMATIC Logon for WinCC Runtime Professional
Supports the user in combination with the Audit option in
meeting requirements in accordance with FDA 21 CFR Part 11 The SIMATIC Logon can be used for the central user manage-
and EU178. ment of several WinCC Runtime Professional stations. Operation
in a Windows Workgroup or even in a domain is possible.
Licensing:
SIMATIC Logon (basic license) and SIMATIC Logon Remote
Access (3-pack license) for the connection of 3 panels or Function
WinCC Runtime Advanced stations to a central user adminis-
tration. Additional stations can be connected by using further Users receive a unique user ID, user name and password.
SIMATIC Logon Remote Access licenses (3-pack/10-pack). This information is encrypted and stored at a central point
(for SIMATIC Logon in the Windows user management). Func-
SIMATIC Logon for WinCC Runtime Professional tions such as changing the password, automatic log-off after a
All users of WinCC Runtime Professional can be managed predefined time and lockout after several incorrect entries of a
plant-wide from a central location. password ensure maximum security of operation. In addition,
SIMATIC Logon allows setting up new users online, plant-wide
The central user management with SL utilizes Windows and across applications, or blocking of existing users.
mechanisms and must be installed on all participating WinCC SIMATIC Logon also supports electronic signature.
Runtime Professional stations.
Licensing
SIMATIC Logon (basic license) is included in the basic
package of WinCC Runtime Professional
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
SIMATIC Logon
3
the number of licensed clients is
determined from the sum of the
installed SIMATIC Logon Remote
Access licenses.
SIMATIC Logon Remote Access 6ES7658-7BB00-2YB0
(10 clients)
Remote Access for 10 clients;
Single License for 10 SIMATIC
Logon Remote Access clients;
the number of licensed clients is
determined from the sum of the
installed SIMATIC Logon Remote
Access licenses.
1)
SIMATIC Logon V1.5 included in scope of supply of WinCC Runtime
Professional.
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Sm@rtServer
Overview
Sm@rtServer Sm@rtClient
...
G_ST80_XX_00071
Industrial Ethernet
Benefits
Flexible solution for remote access to HMI systems
Quick elimination of malfunctions or downtimes thus
increasing the productivity through global access to
machines/plants by the service and maintenance personnel.
Avoidance of on-site service calls.
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Sm@rtServer
Application
Operator control and monitoring of machines covering large Remote maintenance and servicing of machines/plants over
areas with several operator stations by one operator. the Internet/Intranet
Operator control and monitoring of machine-level HMI
systems from one central station (e.g. head-end station of a
production line or from a control room)
Sm@rtServer Sm@rtClient
...
G_ST80_XX_00071
Industrial Ethernet
Industrial Ethernet
PROFIBUS
G_ST80_XX_00072
Use of the Sm@rtClient display: Operator control and monitoring of machine-level HMI systems from one central station
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Sm@rtServer
Case 2:
Operator control and monitoring
using the Internet/Intranet with
access to the complete device;
Engineering Station softkeys and function keys
PC/PG
Case 1:
Operator control and monitoring
using the
Microsoft Internet Explorer
Industrial Ethernet
G_ST80_XX_00076
PROFIBUS
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Sm@rtServer
as Sm@rtServer 3 clients for 7", 9", 12" and 15" devices 1) The license must be installed on the Sm@rtServer HMI device. A license is
2 clients for 19" devices not required for the engineering system for configuring the runtime option.
1 client for 22" devices 2) Current information and availability regarding the new delivery package
Mobile Panel 177 PN, 2 clients can be found at: http://www.siemens.com/tia-online-software-delivery
TP/OP 177B PN/DP,
MP 177 as Sm@rtServer
Mobile Panel 277, 3 clients for 6" devices
TP/OP 277, 2 clients for 8" and 10" devices
MP 277 as Sm@rtServer
MP 377 as Sm@rtServer 3 clients for 12" devices
2 clients for 15" devices
1 client for 19" devices
WinCC Runtime Advanced as 5 clients
Sm@rtServer
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Server / WinCC Client
Overview
Industrial Ethernet
WinCC RT
3
Professional
Server
PROFIBUS
G_ST80_XX_00471
SIMATIC S7-1500 SIMATIC S7-1500
Option for SIMATIC WinCC Runtime Professional, which Client/server solution: One server can supply up to
permits the configuration of a powerful client/server system 32 connected clients with process and archive data, alarms,
One of the following operating systems must be available to screens and reports
install the option on the server: Windows Server 2003 R2 SP2, - Requirement: Network connection (TCP/IP) between the
Windows Server 2008 SP2 or Windows XP Professional. When server PC and the connected clients
using Windows XP Professional, max. 3 clients can be Licensing:
connected. - A WinCC Runtime Professional license on the server with the
A number of coordinated OCM stations can be operated appropriate number of PowerTags and the "WinCC Server for
in a single group with networked automation systems RT Professional" license.
- The "WinCC Client for RT Professional" license on the clients.
Benefits
Integrated scalability from the single-user system to the
client/server solution
Considerably expanded quantity structure, relieves the load
on the individual servers, and thus better performance
through the distribution of the overall application or of the
tasks among several servers
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Server / WinCC Client
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC Redundancy
Option for SIMATIC WinCC (TIA Portal), supporting the parallel SIMATIC WinCC Redundancy
operation of two interfaced WinCC single-user systems or pro- for Runtime Professional
cess data servers for mutual monitoring Single license for 2 installations, 6AV2107-0FB00-0BB0
If one of the two server PCs or one of the two WinCC stations license key on USB stick,
software and documentation
fails, the second one will take over control of the entire system. on DVD
Once the failed server or station is restored to operation, the con-
tents of all the message and process value archives are copied as download 1) 6AV2107-0FB00-0BH0
Single license for 2 installations,
to it. license key download only,
One WinCC Redundancy package is required for each e-mail address required for
delivery
redundant pair of servers.
1)
Current information and availability regarding the new delivery package
Benefits can be found at: http://www.siemens.com/tia-online-software-delivery
Increased system availability with gap-free data integrity A license is not required for the engineering system for
configuring the runtime option.
Automatic switchover of the client when a server fails or the
communication to the server fails
Continuous operation and visualization through automatic
3
switchover of the clients to the intact server
Automatic synchronization of all archives in the background
after a fault is cleared
Function
Normally, two WinCC stations or process data servers run in par-
allel. Each station has its own process connection and its own
data archives. WinCC Redundancy ensures automatic matching
of system and user archive data.
If one of the two server computers or WinCC stations fails, the
second will take over the archiving of messages and process
data, thereby ensuring seamless data integrity. In client/server
mode, the clients are automatically switched from the failed
server to the redundant partner. This ensures continuous plant
visualization and operation on every operator station.
When the failed partner resumes operation, all process values,
messages and data archived during the fail period are automat-
ically matched with the partner. This process runs in the back-
ground and does not affect plant continuity. Once this is com-
plete, two equivalent servers/stations will be available again.
Communication with the SIMATIC S7 PLC can also be config-
ured with redundancy (an H Series SIMATIC S7 is required) by
plugging in two communication modules and configuring two
communication paths (S7-REDCONNECT software package).
The use of failsafe H Series SIMATIC S7 PLCs can, if required,
further increase availability at control level.
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC WebNavigator
Overview
LAN
WinCC server
3 + WebNavigator/
DataMonitor
server
PROFINET
G_ST80_XX_00556
PROFIBUS
S7-1500 S7-1500 S7-300
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC WebNavigator
Benefits Application
Operator control and monitoring across long distances and on In addition to the typical use of the WebNavigator in WANs
different platforms (PC, local panel, mobile PDA) (Wide Area Networks), the WebNavigator can also be used to
Large configurations with up to 50 operator stations implement especially low-cost applications. This especially
Fast update rates due to event-driven communication includes applications that have a pronounced distributed struc-
ture (water/wastewater, oil and gas), or in which access to
Optimally tailored clients for operating and monitoring, process information is only sporadic (building management).
analysis, service and diagnostics
The WebNavigator also permits vertical integration, i.e. a net-
Acceptance of configuration data for the web, generally worked IT landscape with integrated data flow between the plan-
without changes ning and operating level of a company. Only a standard browser
Minimum maintenance costs due to central software is required for direct access to current process information.
administration
In addition to the standard WebNavigator licensing, there is the
High security standards and availability "Diagnostics Client" with identical functionality but different li-
- Support for commonly used security mechanisms (routers, censing. It is especially suitable for the following applications:
firewalls, proxy servers)
- WinCC access authorizations and user administration Remote diagnostics/operation of several unmanned WinCC
Runtime Professional stations
Support of Microsoft Internet Explorer, including "tabbed
browsing". A new license is not required for separate tabs. Central control rooms that monitor several web servers via one
user interface
3
With the WinCC Web Viewer (WinCC Viewer RT), the process
screens can be displayed on the web client independently of Maintenance personnel who require guaranteed access to the
the Internet Explorer. Settings for the client are made on the server at any time, regardless of the number of users already
client itself. The WinCC Web Viewer can also be used in logged on to the server. On the server side, only one WebNav-
conjunction with the MS Terminal Service. igator Diagnostics Server license or, alternatively, one
Standard WebNavigator license is required.
The SIMATIC WinCC WebNavigator can also be operated in
"view only" mode and is thus used as tool for monitoring and
navigating using Internet Explorer or WinCC Web Viewer
(WinCC Viewer RT).
Web server logins and logouts are recorded in the alarm and
audit log.
There is a gadget available for the Windows 7 operating
system in which selected WinCC process screens can be
displayed. No additional WebNavigator license is required for
the gadget. The WebNavigator server can be selected directly
via the gadget.
Security is increased by adjustable automatic logout. If an
automatic logout is to take place, an absolute or inactive time
period can be set.
Highlights:
Multiple Web servers can be accessed from a single Web
client
User-friendly services and tools for distributing customized
objects (controls, files) to web clients can be supplied for use
as an integration platform. These components can then also
be integrated into cross-web/server navigation.
Both Internet Explorer and the supplied, browser-independent
WinCC Web Viewer (WinCC Viewer RT) can be used as a front
end
Access to WebNavigator Server of the WinCC V7.x series.
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC WebNavigator
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC WebNavigator
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC DataMonitor
Overview
LAN
WinCC server
3 + WebNavigator/
DataMonitor
server
PROFINET
G_ST80_XX_00556
PROFIBUS
S7-1500 S7-1500 S7-300
The WinCC DataMonitor is used for displaying and evaluating DataMonitor does not require manual client installation
current process states and historical data on office PCs using because it loads the required components from the
standard tools such as Microsoft Internet Explorer or Microsoft DataMonitor server
Excel. In doing so, the DataMonitor client is supplied by a Web There is no installation required on the client for the Webcenter
server with current and historic process data and alarms. All and Trends and Alarms functions
staff ranging from machine operators to corporate managers
can use the DataMonitor to obtain information. Licensing:
- Licenses for access by 1, 3, 10, 25, or 50 DataMonitor clients
DataMonitor is a suite of Internet-capable tools: are available
- Process screens - Any combination of DataMonitor and WebNavigator licenses
Tool exclusively for monitoring and navigating via WinCC can be used in an application
Runtime Professional screens using the WinCC Web Viewer
(WinCCViewerRT) in the "view only" mode Note:
- Excel Workbooks When accessing the operator stations via the
Logging tool that integrates WinCC Runtime Professional WinCC DataMonitor option, suitable protective measures
Archive and online values into Microsoft Excel and supports (including IT security such as network segmentation) should be
online analysis taken in order to ensure safe operation of the system.
- Published Reports
Event or time-driven implementation of Excel or PDF reports You will find more information on the topic of Industrial Security
for the output of process data and analysis results on the Internet at:
- Webcenter
Individual configuration of Internet pages and summary of http://www.siemens.com/industrialsecurity
information within a portal with reference to WinCC Runtime
Professional applications
- Trends and Alarms
(tables and graphs) are preconfigured Webcenter pages
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC DataMonitor
Benefits Function
Information can be compiled online individually during All tools are fully Internet-compatible and, therefore, support
runtime via the Internet/Intranet. access via any type of connection (LAN, GSM, radio, modem,
Efficiently monitor and analyze production lines. Internet, etc.).
- Display and evaluation of current process states and All popular security mechanisms such as login/password,
historical data on remote office PCs with standard tools such firewalls, encryption, etc. are supported.
as Microsoft Internet Explorer or Excel. Users can combine the available tools at will. Licensing only
- Easy access to production data via the Intranet or Internet takes into account simultaneous access to one Web server.
- Quick ascertainment of the production situation
For display purposes, screens from the WinCC project can be
Easily collect and distribute information. used or special overview displays configured. Animations,
- Automated report creation scripts, navigation and access rights remain valid.
- No additional configuration effort through direct use of
screens from the WinCC project The WinCC DataMonitor has purely a display function
- No training required for standard products Company-wide Excel reports, which contain historical and
- Easy exchange of configuration data current process values, can be stored centrally for general
Substantiate decisions with reports. access (reports, statistics). However, local queries to meet
individual requirements can be compiled and executed
3
- Evaluation via ready-made templates for special analyses of
the business processes (e.g. reports, statistics) online. Plot and tabular representation are supported for
- Display bottlenecks transparently archive data already swapped out.
- Individual views for user and situation Data can be automatically entered into created report
- Relative and absolute timeframe for information generation templates and distributed by e-mail.
View production status anywhere and anytime. Pre-made elements make the assembly of individual web
- Individual views of information in production pages easier for evaluating information.
- View the process and system operation Individual information compilation on one or more Internet
- Historical data can be compiled online individually pages with the option of branching to other detail pages.
Highlights: Pre-made Internet pages for trend and alarm display enable
With the Webcenter function, WinCC Runtime Professional an ad-hoc entry to Internet data evaluation.
archive tags can be accessed without changing the configu- An higher-level navigation feature provides a common
ration system. framework for the various tools.
Dedicated Internet pages can be created for displaying data Enhanced user management for WebCenter in order to assign
with the Webcenter. For this purpose, the following tools, individual Internet pages and created reports to specific user
which can be integrated in the Internet sites, are available. groups
- Bar chart, pie chart, trend curve display A search function simplifies the management of connections
- Process value table and statistics functions for the process to the WinCC server
values
- Alarms, hit list for alarms Swapped out archives can be connected and evaluated in the
- Message text display for individual message texts, message DataMonitor WebCenter.
display, selection list of created reports, Excel reports created offline can be loaded onto the
- Links to internal and external pages DataMonitor server and are thus made available to selected
- Display of graphics in jpg format user groups or for automatic distribution.
- Representation of the WinCC Runtime Professional process
screens converted into jpg
The analyses can be made with relative or absolute time
specification. This enables comparisons of identical time
periods on different days.
Reports generated with Excel or with WinCC Professional can
be made available on the DataMonitor server or e-mailed
automatically to the relevant group of people based on time
intervals or triggered by events.
Connections to WinCC Runtime Professional and to swapped
out archives can be established
Support of Microsoft Internet Explorer version, including
"tabbed browsing".
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC DataMonitor
3 From 10 to 25 Clients
From 25 to 50 Clients
6AV2107-2LH00-0BD0
6AV2107-2LK00-0BD0
license key download only,
e-mail address required for the
delivery
From 1 to 3 clients 6AV2107-2LD00-0BJ0
From 3 to 10 clients 6AV2107-2LF00-0BJ0
From 10 to 25 clients 6AV2107-2LH00-0BJ0
From 25 to 50 clients 6AV2107-2LK00-0BJ0
1) Current information and availability regarding the new delivery package
can be found at: http://www.siemens.com/tia-online-software-delivery
A license is not required for the engineering system for
configuring the runtime option.
HMI Software
HMI Software in the TIA Portal
SIMATIC WinCC (TIA Portal) options
WinCC ControlDevelopment
You use the ControlDevelopment option to create your own WinCC ControlDevelopment V13
.net controls for controlling and monitoring processes. You can Runtime license, single license, 6AV2107-0TA03-0DA8
use the controls in screens for WinCC Runtime Advanced and software and documentation
WinCC Runtime Professional. You create the controls based on on CD
the standard controls from Visual Studio 2005/2008 Professional Runtime software, single license, 6AV2107-0TA03-0DG8
.net. software download
(e-mail address required for the
Application examples delivery) 1)
Special trend views 1)
Current information and availability regarding the new delivery package
can be found at: http://www.siemens.com/tia-online-software-delivery
Own recipe managements
Complex display objects
More information
Benefits Further information can be found in the Internet at:
The ControlDevelopment option enables user-specific software http://www.siemens.com/tia-portal
3
solutions based on a proven building block principle:
Lower development overhead by using standards
(Visual Studio 2005/2008 Professional .net)
Very short "Time-to-Market" resulting in a competitive
advantage
Utilization of tried components and proven industrial
functionality
The development of proprietary controls for WinCC Runtime
Advanced and WinCC Runtime Professional does not require
expensive, special hardware.
HMI Software
Software for energy management
SIMATIC B.Data
Overview
Software for energy management SIMATIC B.Data V6.0 SP1 Energy Management System
SIMATIC offers numerous reasons for corporate energy man- SIMATIC B.Data is a modular, cross-sector energy management
agement in industrial plants. However, there is one in particular: system for industrial firms.
It makes an important contribution towards improving plant pro-
ductivity. This results in enhanced competitiveness. Energy
management with SIMATIC makes energy flows transparent in
production plants. This supports the analysis and derivation of
energy saving potential.
The result: Permanently increased efficiency, higher productivity
and an improved cost situation.
3 B.Data Energy planning and procurement Energy controlling Monitoring and reporting
G_ST80_XX_00379
Automation Process
field level Interfaces to lower-level systems Meters/ control/ PLCs Circuit- Mobile data
measuring building breakers acquisition
devices management
sytems
HMI Software
Software for energy management
SIMATIC B.Data
HMI Software
Software for energy management
SIMATIC B.Data
Technical specifications
SIMATIC B.Data V6.0 SP1
Operating system Windows Server 2008 R2
3 (German/English)
Windows Server 2012 R2
(German/English)
Windows 7 Professional/Ultimate SP1
(German/English)
Windows 8.1 Pro/Enterprise 64-bit
(German/English)
B.Data - Web Client Minimum of 4 GB RAM
Energy accounting (costs and revenue accounting) Interface In addition to an interface to WinCC and S7
controllers, B.Data also offers the latest
Calculation and allocation/assignment of energy costs to plants interface standards such as OPC DA,
OPC HDA, OPC UA, MODBUS TCP, ODBC,
and/or customers/cost units in accordance with the costs-by- ASCII and XML.
cause principle. The bottom up (measurement) and top down
(allocation) procedures are supported here WinCC versions 1) SIMATIC WinCC V7.0 SP3, V7.2, V7.3 SE
SIMATIC WinCC RT Professional V13
Flexible modeling of the hierarchic accounting structures in
the Plant Explorer PCS 7 versions 2) SIMATIC PCS 7 V8
SIMATIC PCS 7 V8.0 SP1
Tariff allocation of quantities, flexible price assessment with SIMATIC PCS 7 V8.0 SP2
tariff and price time series 1)
If an acquisition computer is installed on a WinCC system, these require-
Transfer of costs/revenues to the ERP system ments must also be complied with.
(e.g. SAP R/3 CO) 2)
The SIMATIC B.Data system for connection to the PCS 7 must always be
installed on a separate PC.
75% 25%
G_ST80_XX_00380
Counter 1 Counter 3
Counter 2
Energy planning
Generation of requirement forecasts based on production-
dependent factors (production planning) and basic load
profiles (typical days)
HMI Software
Software for energy management
SIMATIC B.Data
1) B.Data V6.0 SP1 Professional is delivered with an Oracle database 4) This version of SIMATIC B.Data V6.0 SP1 Enterprise is supplied with an
Standard Edition Embedded (max. 4 CPU sockets). For larger configu- Oracle Database Enterprise Edition Embedded. This is designed for larger
ration limits (starting with approx. 250 million stored measured values), you quantity structures (starting with approx. 250 million saved measured
need Oracle Database Enterprise Edition with the Partitioning Option. values).
2) The tag packages dynamically expand the number of tags. The total 5) This version of SIMATIC B.Data SP1 V6.0 Enterprise is supplied without a
number of tags is incremented by the value of the tag package in each database. It is recommended to use the Oracle Database Enterprise
case. Edition, which must be ordered separately from Oracle.
3) The SUS contract runs for 1 year. The contract is automatically extended 6) The upgrades are supplied without Oracle Database Enterprise Edition
by a further year unless canceled 3 months prior to expiration. Embedded.
For more detailed information, refer to:
http://www.siemens.com/bdata
More information
Further information can be found on the Internet at:
http://www.siemens.com/simatic-bdata
HMI Software
Software for energy management
SIMATIC powerrate
Overview Design
SIMATIC powerrate comprises the following components:
Blocks for acquiring and conditioning energy data
Faceplates for displaying and editing energy data
Blocks for implementing load management (calculating the
trend, monitoring the limit, releasing/inhibiting loads),
batch-related consumption recording and for integrating
measuring instruments and switches
Additional blocks for example, for time synchronization, data
backup, data exchange with archives
Faceplates for displaying results and entering values
(e.g. for configuration, or manually measured values)
Excel-based reports for allocating energy data to cost
centers, for batch-related evaluation and for determining and
displaying the load duration curve
3 Exporting data to Excel
Function
Acquiring and conditioning energy data
SIMATIC powerrate, as an option for WinCC / PCS 7, ensures
transparency in energy consumption from the infeed to the load. Using ready-to-use function blocks, energy data can be
acquired by any PROFIBUS-capable devices. The data can
SIMATIC powerrate is used in all sectors in which WinCC or be input to the function blocks in the form of counter pulses,
PCS 7 are deployed and energy efficiency considerations play a count values or power values. Count values can also be entered
major role. Total integration into WinCC or PCS 7 means that manually.
there is no need for a special system environment. Predefined
modules and symbols give you the assurance of building on From this data, the function block calculates the power averages
tested product components, with interfaces that support and the work values for a predefined period. This calculated
customized expansion. data is subsequently saved in the WinCC archive. In addition, a
final value forecast is extrapolated for the power values for each
SIMATIC powerrate therefore provides a solution that you can period.
use to obtain an overview of the energy consumption of a plant
easily and cost-effectively through integration in an existing A sample function (heat calculation) that can be adapted to the
SIMATIC SCADA system. needs of the customer at any time by means of open interfaces
has been implemented for the purpose of visualizing customized
Benefits calculations.
Identification of energy-intensive equipment and processes to Data from manually read counters can be entered directly into
develop measures for improving energy efficiency. the system and used for further analysis. Absolute numerical val-
ues (entry of an absolute value instead of the difference from the
Comparison of consumption profiles for more efficient previous value) can also be recorded and used in further pro-
processes. cessing.
Optimization of the company according to energy parameters,
based on an evaluation of consumption and costs. Displaying energy data
Compliance with the contractually agreed power limits, thus The up-to-date, acquired energy data is displayed as power
preventing higher power supply costs or penalty payments. averages/work values for each time interval (total value for the
previous interval, current value of the current interval, extrapo-
Integration of the 7KM PAC3200/4200 measuring devices for
lated value for the end of the current interval). A load trend
a clear overview of selected measured values and alarms.
display enables analysis of archived energy data as well as its
Integration of switches with an overview of the switch status representation in tables.
and the switching possibilities.
Accurate assignment and comparison of the consumption
data of specific work processes or batches
HMI Software
Software for energy management
SIMATIC powerrate
Function (continued)
Further processing of data Batch-related consumption recording
The archived data can be exported to Excel directly from WinCC A batch comprises all the units of a product that have
using the export functions. The exported energy data can also been produced in one production cycle, i.e. under identical
be included in further customized processing. WinCC tools can conditions. Batch-related consumption recording allows
be used to access the data from the WinCC archive. accurate recording of energy consumption for each batch.
Batch-related consumption recording is possible for five types
Reports of energy each with up to 10 loads. Appropriate reports can be
For this purpose, selected energy data is read from archives generated for analysis of the data (see also the batch report).
(Tag Logging archive, user archives) from the WinCC Runtime Integration of measuring devices 7KM PAC3200/PAC4200
database; using Microsoft Excel the following reports can then
be generated: If the 7KM PAC3200/PAC4200 measuring devices are inte-
Cost center report grated, selected measured values can be displayed and alarms
Here the consumption can be allocated to different cost (current, voltage, pulse frequency too high) can be generated
centers and the costs can be calculated on the basis of from the digital status information and displayed.
predefined tariffs. The results can be output by means of Integration of switches
2 reports in the form of tables or diagrams.
Load duration curve Switch integration via digital inputs/outputs (DI/DO) supports
display of the switch status (On, Off, tripped, unplugged).
3
An analysis is carried out on the basis of the archived power
averages to establish how often a certain power average has With the appropriate authorization, switching is also possible via
occurred in a given period. It can be quickly detected from the faceplate. Switching takes place in a 2-step operation
this characteristic curve whether temporary power peaks exist (switch command is issued, followed by a prompt for repeated
which can represent a possible starting point for cost savings confirmation; the switch command is not forwarded to the switch
by means of load management. until confirmation has been received).
Batch report WinCC WebNavigator support
This is used to allocate consumption to batches, whereby the
data can be presented in chronological order or in order of Makes the powerrate functionality available over the Web.
batch name.
Special functions
The generation of exports or reports can be initiated manually or
automatically time-controlled (daily, weekly or monthly). To avoid data loss in the event of a communication fault, the data
is stored temporarily in a circulating buffer on the S7.
Load management
Contractually agreed power limits (in the case of electricity,
normally the 15-minute average power value) must be observed,
otherwise significantly higher supply prices or even penalty
payments may become due to the energy supply company. The
load management feature of SIMATIC powerrate carries out
cyclic trend calculations in order to issue warnings/alarms if
violation of the limit is likely and to switch off loads in accordance
with the given configuration should this be required. If a limit is
exceeded despite this, the latest load management data is
archived to enable future evaluation or analysis.
To prevent unnecessary switching operations, numerous param-
eters are available for adapting the load management to the cur-
rent process conditions - and all this can be done conveniently
via the faceplate.
For loads that are distributed over different PLCs, SIMATIC
powerrate contains appropriate PLC-to-PLC communication
blocks which can be used to integrate these loads into the load
management system. Load management is scalable, according
to the maximum number of loads to be integrated or monitored,
for up to 10, 25, 50, 75 or 100 loads. Load management
can be performed for different media (e.g. electricity, gas)
simultaneously.
HMI Software
Software for energy management
SIMATIC powerrate
3
higher Trial License
- SIMATIC S7 CPU 315-2 PN/DP V3.1 and Limited 30-day
higher ES + OS Runtime license
SIMATIC ET 200S IM151-8 PN/DP CPU
V3.2 and higher 1) For operation on a WinCC/PCS 7 OS single-user workstation or server
Firmware version V3.x or later is and any number of automation systems. When using additional
recommended for S7-300 controllers. WinCC/PCS 7 OS single-user stations/servers, one license is required per
CPUs with firmware version V3.2 or higher WinCC/PCS 7 OS single-user station/server.
must be used for the implementation of
PROFIenergy I-device blocks
PR3_PE_IDEV and PRx_PE_RD. More information
WinAC RTX 2010 SP1 and SP2
Further information can be found on the Internet at:
Software requirements
http://www.siemens.com/simatic-powerrate
You can use SIMATIC PCS 7
powerrate in the PCS 7 or STEP 7 and WinCC SCADA Important information on the use of SIMATIC powerrate is
WinCC SCADA environments. available on the Internet at:
For installation, the respective
software requirements of the http://support.automation.siemens.com/WW/view/en/48204134
following products apply:
The library is released for the SIMATIC PCS 7 V8.1 SP1
following PCS 7 versions SIMATIC PCS 7 V8.1
SIMATIC PCS 7 V8.0 SP2
SIMATIC PCS 7 V7.1 SP4
The library is released for the SIMATIC WinCC V7.3 Second Edition
following WinCC version with SIMATIC WinCC V7.2 Update 1 or higher
the corresponding versions of (Update 2 is recommended)
STEP 7
For use with WinCC V7.3 or WinCC minimum installation
V7.2, the following installations - Basic Process Control
are required: - User archives for load management and
batch-oriented energy acquisition
WinCC add-on "AS-OS Engineering"
For the use of SIMATIC powerrate V4.0,
WinCC must execute in integrated mode
with STEP 7.
SIMATIC NET
STEP 7
powerrate Reports has been Microsoft Excel 2003
released for the following Microsoft Excel 2007
versions Microsoft Excel 2010
Microsoft Excel 2013
HMI Software
SIMATIC WinCC flexible HMI system
Introduction, SIMATIC WinCC flexible ES
Overview SIMATIC WinCC flexible HMI system Overview SIMATIC WinCC flexible ES
SIMATIC WinCC flexible ES engineering software
Family of configuration systems with WinCC flexible
Micro/Compact/Standard/Advanced for SIMATIC operator
panels, the HMI part of SIMATIC C7 as well as for the
PC-based visualization software WinCC flexible Runtime
Runs under Windows XP Professional / Windows 7
Professional, Ultimate, Enterprise
Can be expanded by the option
"WinCC flexible/ChangeControl" for version management and
change logging
SIMATIC WinCC flexible Runtime visualization software
Modular PC-based HMI solution for single-user systems
directly at the machine (further development of
ProTool/Pro RT)
Runs under Windows XP Professional / Windows 7
Professional, Ultimate, Enterprise
3
Basic package for visualization, reporting and logging; can be
expanded by implementing option packages
Flexible expansion possible with VB scripts and customized
ActiveX controls created with OPP (Open Platform Program) Uniform family of engineering tools for configuration
Can be integrated into automation solutions based on SIMATIC HMI Operator Panels, the operator control part of
TCP/IP networks SIMATIC C7 units, SIMOTION/SINUMERIK Panel PCs as well
Expanded service concepts with remote operation, as the PC-based visualization software WinCC flexible
diagnostics and administration over the intranet and Internet Runtime.
in combination with email communication Runs under Windows XP Professional / Windows 7
Professional, Ultimate, Enterprise
Current version:
- SIMATIC WinCC flexible 2008 SP3 Micro
- SIMATIC WinCC flexible 2008 SP3 Compact
- SIMATIC WinCC flexible 2008 SP3 Standard
- SIMATIC WinCC flexible 2008 SP3 Advanced
HMI Software
SIMATIC WinCC flexible HMI system
Introduction, SIMATIC WinCC flexible ES
Application
SIMATIC WinCC flexible Micro/Compact/Standard/Advanced WinCC flexible Standard
are engineering tools for configuring SIMATIC HMI devices, the
operating component of SIMATIC C7 devices, the SIMOTION/ In addition to the target systems that are configured using
SINUMERIK Panel PCs as well as the PC-based visualization WinCC flexible Compact:
system WinCC flexible Runtime. Mobile Panels: Mobile Panel 277
Depending on the selected product, various target systems can 270 series Panels: TP 270, TP 277, OP 270, OP 277
be configured: 270 series Multi Panels: MP 270B, MP 277
WinCC flexible Micro 370 series Multi Panels: MP 370, MP 377
Micro Panels: OP 73micro, TP 170micro, TP 177micro C7 devices: C7-636 (Touch/Key)
In addition to the target systems that are configured using In addition to the target systems that are configured using
WinCC flexible Micro: WinCC flexible Standard:
Basic Panels: KTP400 Basic, KTP600 Basic, KTP1000 Basic, Standard PC
3 TP1500 Basic
Mobile Panels: Mobile Panel 170, Mobile Panel 177
SIMATIC Panel PC: Panel PC IL 70, Panel PC IL 77,
Panel PC 477/477B, Panel PC 577/577B, Panel PC 670,
Panel PC 677/677B, Panel PC 870, Panel PC 877
70 series Panels: OP 73, OP 77A, OP 77B
SIMOTION Panel PC: P012K, P012T, P015K, P015T, PCR,
170 series Panels: TP 170A, TP 177A, TP 170B, TP 177B, PCR-Touch
OP 170B, OP 177B
SINUMERIK Panel PC: HT8, OP08T, OP010, OP012, TP012,
170 series Multi Panels: MP 177 OP015, TP015, OP015A
C7 devices: C7-635 (Touch/Key)
For configuring panels released after the start of delivery of
WinCC flexible 2008, an HSP (Hardware Support Package) is
required that can be downloaded free of charge via the following
link: http://www.siemens.com/wincc-flexible-hsp
HMI Software
SIMATIC WinCC flexible HMI system
Introduction, SIMATIC WinCC flexible ES
3
download, floating license,
DVD drive for software installation e-mail address required for the
1) delivery
In addition to the space needed by WinCC flexible, Windows also requires
space on the hard disk; WinCC flexible 2008 Standard
e.g. for the swap file. The following formula has proven itself in the past: incl. SP3
The size of the swap file = 3 x the size of available RAM. Software and documentation 6AV6612-0AA51-3CA5
For further information, refer to your Windows documentation on DVD, floating license,
2) When installing one language. An additional 200 MB are required for each license key on USB stick
further language. In the case of different partitions for system and configu- as download 4), 6AV6612-0AA51-3CH5
ration: System partition approx. 700 MB, project partition approx. 1.3 GB. software and license key
3) When installing one language. An additional 80 MB are required for each download, floating license,
e-mail address required for the
further language. In the case of different partitions for system and configu-
delivery
ration: System partition approx. 600 MB, project partition approx. 600 MB.
4) Current information and availability regarding the new type of delivery can
be found at: http://www.siemens.com/tia-online-software-delivery
HMI Software
SIMATIC WinCC flexible HMI system
Introduction, SIMATIC WinCC flexible ES
More information
Additional information is available in the Internet under: Note
http://www.siemens.com/wincc-flexible Do you require a specific modification or extension to the
products described here? You will find information about the
Open Platform Program for the creation of user-specific
functions and controls for WinCC flexible under "Customized
Products".
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible RT
Overview Application
SIMATIC WinCC flexible Runtime can be used in combination
with the following operator panels:
SIMATIC Panel PCs
- PC IL 70/77
- Microbox 420
- Panel PCs 477/477B/477C
- Panel PCs 577/577B/577C
- Panel PCs 670/677/677B/677C
- Panel PCs 870/877
SIMOTION Panel PCs
- P012, P015
- PCR, PCR-Touch
SINUMERIK Panel PCs
- HT8; OP08T
- OP010, OP012, OP015
- TP012, TP015, OP015A
Standard PCs with resolutions (W x H in pixels) of:
3
- 4:3 format: 640 x 480, 800 x 600, 1 024 x 768, 1 280 x 1 024,
1 600 x 1 200
- Widescreen format: 800 x 480, 1 280 x 800, 1 366 x 768,
1 440 x 900, 1 680 x 1 050, 1 920 x 1 080, 1 920 x 1 200,
PC-based visualization software for single-user systems directly 1 980 x 1 080
at the machine.
Runs under Windows XP Professional and Windows 7
Professional, Ultimate, Enterprise
Design
Current version: SIMATIC WinCC flexible 2008 SP3 Runtime SIMATIC WinCC flexible Runtime is available as a software
package with 128, 512, 2048 or 4096 PowerTags. The term
SIMATIC WinCC flexible Runtime is configured with the PowerTags is used exclusively to identify process variables and
SIMATIC WinCC flexible Advanced configuration software. range pointers that have a process link to the controller.
Variables without process link, constant limit values of variables,
and messages (up to 4000 bit-triggered messages) are also
available for additional system performance.
The range of functions of WinCC flexible Runtime includes the
centralized HMI components for visualizing and reporting, and it
can be expanded to suit requirements and costs by using
optional packages.
SIMATIC WinCC flexible Runtime is configured with the
SIMATIC WinCC flexible Advanced configuration software.
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible RT
Function Integration
System requirements WinCC flexible Runtime SIMATIC WinCC flexible Runtime supports linking to:
Operating system Windows XP Professional SP3 (32-bit) Protocol PC interfaces
Windows XP Embedded 1)
Windows 7 Professional / Ultimate / SIMATIC S5 via AS511 (TTY)
Enterprise (32-bit and 64-bit)
S5-90U COM1/COM2 13)
Processor4)
S5-90U
Minimum Windows XP: 300 MHz
Windows 7: 1 GHz S5-100U (CPU 100, 102, 103)
Recommended Windows XP: Pentium III, 500 MHz S5-115U
Windows 7: 1 GHz (CPU 941, 942, 943, 944, 945)
Graphics S5-135U (CPU 928A, 928B)
Minimum SVGA
S5-155U (CPU 946/947, 948)
Resolution 640 x 480 to 1600 x 1200 or
800 x 480 to 1980 x 1080 SIMATIC S5 via PROFIBUS DP 1)
RAM 2) S5-95U/L2-DP master CP 5512 2)
CP 5611 A2 2)
3
Minimum Windows XP: 128 MB
S5-115U
Windows 7: 1 GB
(CPU 941, 942, 943, 944, 945)
Recommended Windows XP: 512 MB
Windows 7: 1 GB S5-135U (CPU 928A, 928B)
Hard disk (free memory space) 3)
250 MB S5-155U (CPU 946/947, 948)
1) Only for enabled platforms (e.g. Panel PC 477). You can get information SIMATIC S7 via PPI
from your Siemens contact. S7-200 CP 5611 A2 2)
2) RAM requirements are determined primarily by the size of the graphics CP 5612
used. CP 5621 1)
3) Without taking archives into account. CP 5622
In addition to the space needed by WinCC flexible, Windows also requires CP 5613 A3
space on the hard disk; e.g., for the swap file. The following formula has CP 5614 A3
proven itself in the past: The size of the swap file = 3 x the size of the RAM. CP 5623
For further information, refer to your Windows documentation CP 5624
4) CP 5711
More powerful systems (Pentium 4 and higher) may be required in order to PC/PPI adapter 3)
use options
SIMATIC S7 via MPI
S7-200 (except CPU 212) 4) CP 5611 A2 2)
CP 5612
S7-300 CP 5621 1)
S7-400 CP 5622
CP 5613 A3
WinAC Basis (V3.0 and higher) CP 5614 A3
CP 5623
WinAC RTX
CP 5624
CP 5711
PC adapter USB A2 6)
Teleservice V6.1
1) WinCC flexible Runtime is passive (DP slave); the function block required
for the link is included in the scope of delivery of WinCC flexible
2) For Microbox 427 and Panel PC 477/577/677 via internal MPI/DP interface
3) Only point-to-point to S7-200; no configuration download, operating
systems: Windows XP; Article number: 6ES7901-3CB30-0AX0
4) Constraint with regard to baud rate for S7-200; see Catalog ST 70
6) Only point-to-point to S7-300/-400; no configuration download, operating
systems: Windows XP or higher; article number: 6GK1571-0BA00-0AA0
(USB)
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible RT
Integration (continued)
Protocol PC interfaces Protocol PC interfaces
SIMATIC S7 via PROFIBUS DP 5) SIMATIC S7 via integrated interface
S7-215 4) CP 5611 A2 2) WinAC Basis (V2.0 and higher) Internal system interface
CP 5612
S7-300 CPUs with integral CP 5621 1) WinAC RTX
PROFIBUS-SS CP 5622 SIMATIC 505 NITP
S7-300 with CP 342-5 CP 5613 A3
CP 5614 A3 SIMATIC 500/505 RS 232/RS 422 COM1/COM2
S7-400 CPUs with integral CP 5623
PROFIBUS-SS SIMATIC 505 via PROFIBUS DP
CP 5624
S7-400 with CP 443-5 or IM 467
CP 5711 SIMATIC 545/555 with CP 5434 CP 5612 2)
CP 5622 2)
WinAC Basis (V3.0 and higher)
SIMOTION 8)
WinAC RTX
SINUMERIK 9)
SIMATIC S7 via Ethernet (TCP/IP)
Third-party controllers
S7-200 with CP 243-1 CP 1612 A2 7)
3
CP 1613 A2 Allen Bradley (DF1/DH485) COM1/COM2
S7-300 CPUs with integral Ethernet
interface Allen Bradley (Ethernet) CP 1612 A2 7)
1)
WinCC flexible Runtime is passive (DP slave); the function block required Application note
for the link is included in the scope of delivery of WinCC flexible
2)
For Microbox 427 and Panel PC 477/577/677 via internal MPI/DP interface In parallel with each and every PLC link, WinCC flexible Runtime
3) supports the use of the OPC Client channel; this enables,
Only point-to-point to S7-200; no configuration download, operating
systems: Windows XP; Article number: 6ES7901-3CB30-0AX0 for example, connection to an SNMP OPC Server for the purpose
4) of visualizing the data stored there. The SNMP OPC Server
Constraint with regard to baud rate for S7-200; see Catalog ST 70
5)
provides a means of monitoring network components of any type
WinCC flexible RT is active; communication with S7 functions (e.g. switches) which support the SNMP protocol. For further
6)
Only point-to-point to S7-300/-400; no configuration download, operating information, see Catalog IK PI.
systems: Windows XP or higher; article number: 6GK1571-0BA00-0AA0
(USB) Note:
7)
For Microbox 427 and Panel PC 477/577/677/877 via internal Ethernet For further information, see "Operator Control and Monitoring
interface Devices/System interfaces"
8)
For further information, see Catalog PM 10
9)
"SINUMERIK HMI copy license OA" option required; for further information,
see Catalog NC 60
10)
OPC Client is included in scope of delivery, the "WinCC flexible/OPC
Server for WinCC flexible Runtime" license is required for the OPC Server
option
11)
"WinCC flexible/Sm@rtAccess for WinCC flexible Runtime" license required
12)
OPC and HTTP communication are additive, i.e. can be used in
conjunction with the PLC links listed above
13)
Via PC cable with integrated level converter RS 232/TTY;
Article number: 6ES5734-1BD20
For information about SIMATIC Panels that support OPC/http
communication, see the overview under "System interfaces".
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible RT
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible RT
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible RT
More information
Additional information is available in the Internet under: Note
http://www.siemens.com/wincc-flexible Do you need a specific modification or option for the products
described here? You will find information about the Open
Platform Program for the creation of user-specific functions and
controls for WinCC flexible under "Customized Products".
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible options
Overview
Option for SIMATIC WinCC flexible Engineering SIMATIC Logon for WinCC flexible
SIMATIC WinCC flexible /ChangeControl Option for connecting PCs with SIMATIC WinCC flexible Runtime
and SIMATIC Panels to central user administration.
WinCC flexible/ChangeControl enables consistent backup of
configuration data. The history of changes can be verified down SIMATIC WinCC flexible /Sm@rtAccess
to the last detail for applications requiring interruption-free proof Flexible solution for access to HMI systems and process data
for the complete life cycle of a product. from any location
Options for SIMATIC Panels/Multi Panels and Communication between different SIMATIC HMI systems
SIMATIC WinCC flexible Runtime
SIMATIC WinCC flexible /Sm@rtService
SIMATIC WinCC flexible /Archives Remote maintenance and servicing of machines and plant via
Archiving of alarms and process values Internet/intranet
SIMATIC WinCC flexible /Recipes Flexible solution for remote access to machines and plant
Generation and management of data records for machine or SIMATIC WinCC flexible /OPC Server
production data
SIMATIC WinCC flexible /Audit
Incorporation of automation components from different
vendors into a single automation concept 3
Communication for data exchange between HMI systems
Recording of operator actions in an Audit Trail and/or higher-level control system
Audit supports users in meeting special quality requirements, SIMATIC WinCC flexible /ProAgent
e.g.
- Production plant requiring validation according to Precise and rapid process fault diagnostics in plant and
21 CFR Part 11 (Food Drug Administration law) machines for SIMATIC S7 and SIMATIC HMI
- In respect of traceability according to EU 175/2002 Standardized diagnostics concept for various SIMATIC
(EU directive) components
No further configuration overhead for diagnostics functionality
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible options
WinCC flexible /ChangeControl
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible options
WinCC flexible /Archives
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible options
WinCC flexible /Recipes
More information
2)
Dependent on memory medium used
Note
Do you need a specific modification or option for the products
described here? Then look up "Customized products", where
you will find information about the Open Platform Program for the
creation of user-specific functions and controls for
WinCC flexible.
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible options
WinCC flexible /Audit
The audit option combined with the WinCC flexible ES Single license, license key only on 6AV6618-7HD01-3AB0
USB stick
ChangeControl option supports the user with plant validation
as download 2) 6AV6618-7HD01-3AH0
Available for the following SIMATIC HMI systems: Single license,
TP/OP 270, TP/OP 277, MP 270B, MP 277, MP 370, MP 377, license key download only
WinCC flexible Runtime
A license for WinCC flexible /Archives and
E-mail address required for the
delivery 3
WinCC flexible /Audit is required for every operator control unit 1) One license is required for each operator console. A license is not required
(panel or PC) for the engineering system for configuring the runtime option.
2) Current information and availability regarding the new delivery package
Technical specifications can be found at: http://www.siemens.com/tia-online-software-delivery
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible options
SIMATIC Logon for WinCC flexible
3 The following WinCC flexible stations are connected to the the corresponding number of
additional SIMATIC Logon Remote
central station via Ethernet network: Access licenses is required.
PCs with WinCC flexible Runtime SIMATIC Logon Upgrade to V1.5 6ES7658-7BX51-0YE0
SIMATIC Panels from the 177 series or higher (panels with SIMATIC Logon Remote Access 6ES7658-7BA00-2YB0
Ethernet interface) for WinCC flexible (3 clients)
Remote access for
Licensing 3 WinCC flexible 2008 clients;
The following licenses are required: single license for
3 remote access clients;
SIMATIC Logon basic license type of delivery:
CD, license key disk, Certificate of
SIMATIC Logon Remote Access license (3-pack or 10-pack License, Terms and Conditions
license); more than one SIMATIC Logon Remote Access The number of licensed clients is
license can be installed. determined based on the amount of
installed SIMATIC logon remote
The number of connectable stations depends on the SIMATIC access licenses.
Logon Remote Access licenses used. This number is the total of
SIMATIC Logon Remote Access 6ES7658-7BB00-2YB0
the connections provided by the individual licenses. As an for WinCC flexible (10 clients)
example: Two installed licenses for 10 enable the connection of Remote access for
20 stations to the central station. 10 WinCC flexible 2008 clients;
single license for
10 remote access clients;
type of delivery:
CD, license key disk, Certificate of
License, Terms and Conditions
The number of licensed clients is
determined based on the amount of
installed SIMATIC logon remote
access licenses.
More information
Note
Do you need a specific modification or addition to the products
described here? Then take a look under "Customer-specific
products". There, we provide information on the Open Platform
Program for creating your own functions or Controls for
WinCC flexible.
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible options
WinCC flexible /Sm@rtAccess
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible options
WinCC flexible /Sm@rtService
Technical specifications
Type WinCC flexible /Sm@rtService
Execution platform
SIMATIC Panels Mobile Panel 177 PN,
Mobile Panel 277, TP 177B PN/DP,
OP 177B PN/DP, TP/OP 270,
TP/OP 277
SIMATIC Multi Panels MP 177, MP 270B, MP 277, MP 370,
MP 377
PCs SIMATIC WinCC flexible Runtime
Sm@rtService 1)
Remote access via Internet Explorer V6.0 SP1 and higher
HTML pages
for Panels/Multi Panels HTML V1.1 (no support for ActiveX,
Java, ASP)
for WinCC flexible Runtime HTML V1.1
Sending emails via SMTP server
Subject, message texts with
250 characters of text per email;
date/time of message, message no.
1)
The Sm@rtServer and the WinCC flexible/ProAgent option cannot be used
simultaneously on OP/TP/MP 270/370. Parallel operation of the runtime
options ProAgent, Sm@rtAccess and Sm@rtService is possible in the
context of the MP 277 8" and 10" devices, Mobile Panel 277 as well as the
MP 377. Limitation: a maximum of 2 clients can be connected with a
Sm@rtServer.
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible options
WinCC flexible /OPC-Server
Technical specifications
E-mail address required for the
delivery 3
1) One license is required for each operator station. A license is not required
Type WinCC flexible /OPC-Server for the engineering system for configuring the Runtime option.
2) Current information and availability regarding the new delivery package
The specifications are maximum
values can be found at: http://www.siemens.com/tia-online-software-delivery
Execution platform
More information
SIMATIC Panels Mobile Panel 277
SIMATIC Multi Panels MP 270B, MP 277, MP 370, MP 377
PCs SIMATIC WinCC flexible Runtime
Note
OPC-Server
XML server for Multi Panels Supports the OPC XML Data Access Do you need a specific modification or option for the products
specification V1.0 1) described here? Then look up "Customized products", where
DCOM server for WinCC flexible Supports the OPC Data Access you will find information about the Open Platform Program for the
Runtime specification V1.0a and V2.0 creation of user-specific functions and controls for
Number of connections that an 8 WinCC flexible.
OPC server can accommodate
1)
Data access via XML has a functional scope that is similar to OPC Data
Access. A software adapter is required that must be installed on the
OPC client PC to enable DCOM-based OPC clients to access the
OPC XML server without any modification. The software adapter is
supplied with WinCC flexible Engineering and Runtime.
HMI Software
SIMATIC WinCC flexible HMI system
SIMATIC WinCC flexible options
WinCC flexible /ProAgent
Frees up PLC capacity with regard to memory and program Single license, 6AV6618-7DB01-3AB0
license key only on USB stick
execution time
as download 2) 6AV6618-7DB01-3AH0
Note: Single license,
For further information, refer to "SIMATIC ProAgent Process license key download only
Diagnostics Software". E-mail address required for the
delivery
WinCC flexible /ProAgent for
WinCC flexible Runtime 2008 1)
Single license, 6AV6618-7DD01-3AB0
license key only on USB stick
3 as download 2)
Single license,
6AV6618-7DD01-3AH0
More information
Note
Do you need a specific modification or option for the products
described here? Then look up "Customized products", where
you will find information about the Open Platform Program for the
creation of user-specific functions and controls for
WinCC flexible.
HMI Software
SCADA system SIMATIC WinCC V7
Introduction
Overview
SCADA System SIMATIC WinCC V7
The scalable and open SCADA system for maximum
plant transparency and productivity
Efficiency:
As a key to greater productivity, SIMATIC WinCC combines
efficient engineering with high-performance archiving and
maximum data security. With integrated diagnostics functions
and flexible production analysis, you shorten the time-to-
market and also reduce your plant standstill times.
SIMATIC WinCC is the basis for efficient operations
management and intelligent production analyses, so it offers a
secure basis for deciding on optimization measures, and thus
more productivity at lower cost.
Scalability:
With SIMATIC WinCC, it is possible to implement plants in all
industrial sectors and technologies, and easily expand or
modernize them by means of options or add-ons, in functional 3
SIMATIC WinCC terms or sector-specifically.
You can benefit from the redundancy concepts for enhanced
availability, or decide on centralized archiving and analysis of
plant information. SIMATIC WinCC offers stationary and
mobile solutions to cover increasing demands.
Innovation:
With innovative technology, you have all the important infor-
mation in view at all times. In this way, SIMATIC WinCC
simplifies intuitive operation and monitoring of the production
plant even remotely. Stay informed with mobile SCADA
solutions anywhere and at any time including with existing
tablet and smartphone hardware.
The use of multi-touch gestures in the industrial environment
opens the door to modern operator concepts.
Openness:
Since international standards and system-internal script and
programming interfaces are supported, special requests can
also be easily implemented.
SIMATIC WinCC backs cross-vendor communication for
integrating existing hardware, as well as for simple integration
into the IT world. WinCC Specialists are available worldwide
as qualified solution providers. These certified and centrally
audited partners are ready to implement your individual
SCADA project even in diversified client-server architectures
with redundancy, or in applications with energy data
management systems.
SIMATIC WinCC is designed to be independent of any
specific technology or industrial sector, modular in structure,
and easy to expand. It is used worldwide in single-user appli-
cations in mechanical engineering, as well as in complex
multi-user solutions with redundant servers or Web-based
client access. References from many industries prove the
versatility and performance capability.
http://www.siemens.com/wincc-v7
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Overview
Current versions:
SIMATIC WinCC V7.4
Executable with:
Windows 10 (64-bit) Professional, Enterprise
Windows 7 SP1 (32-bit/64-bit) Professional, Enterprise,
Ultimate
Windows 8.1 (32-bit/64-bit) Professional, Enterprise
Windows Server 2008 R2 SP1 (64-bit) Standard
Windows Server 2012 R2 (64-bit) Standard
Includes Microsoft SQL Server 2014 SP1 (32-bit)
SIMATIC WinCC V7.3
Executable with
3 Windows 7 SP1 (32-bit/64-bit) Professional, Enterprise,
Ultimate
Windows 8.1 (32-bit/64-bit) Professional, Enterprise
PC-based operator control and monitoring system for visual- Windows 2008 Server SP2 (32-bit) Standard
izing and operating processes, production flows, machines
and plants in all sectors from the simple single-user station Windows 2008 Server R2 SP1 (64-bit) Standard
through to distributed multi-user systems with redundant Windows Server 2012 R2 (64-bit) Standard
servers and cross-location solutions with Web clients. WinCC Includes Microsoft SQL Server 2008 R2 SP2 (32-bit)
is the information hub for corporation-wide vertical integration.
The basic system configuration (WinCC basic software) Use in virtual environments for more information see:
includes industry-standard functions for signaling and http://support.automation.siemens.com/WW/view/en/49370459
acknowledging events, archiving of messages and measured
values, logging of all process and configuration data, user http://www.siemens.com/wincc-v7
administration and visualization.
The WinCC basic software forms the core of a wide range of SIMATIC SCADA and SIMATIC IPCs
different applications. Based on the open programming inter-
faces, a wide range of WinCC options (from Siemens Industry Perfect interaction for optimum productivity.
Automation) and WinCC add-ons have been developed (by Price advantage as "Package" comprising hardware and
Siemens-internal and external partners). software
WinCC can be operated with every PC that meets the given System-tested solutions reduce testing overhead
HW requirements. The SIMATIC IPC product range is Simple ordering and synchronized logistics
available in particular for the industrial use of WinCC systems.
SIMATIC IPCs impress with their powerful PC technology, are
designed for round-the-clock operation, and can be operated Only if ordered together with the SIMATIC IPC.
in both office areas and harsh industrial environments.
WinCC/IndustrialDataBridge
Provider (data sources) Consumer (data destinations)
csv, txt
MS Excel 2003, 2007, 2010, 2013
MS Access 2003, 2007, 2010, 2013 MS Access 2003, 2007, 2010, 2013
MS SQL Server 2005, 2008, 2008 R2, MS SQL Server 2005, 2008, 2008 R2,
2012 2012
My SQL 3.5, 5.1, 5.5, 5.6 My SQL 3.5, 5.1, 5.5, 5.6
Oracle 8i, 10g, 11g, 12c release 2 Oracle 8i, 10g, 11g, 12c release 2
OPC Data Access 3.0 OPC Data Access 3.0
OPC XML 1.0 OPC XML 1.0
IDB OPC Server
Send/Receive Send/Receive
WinCC V7.2, V7.3 (via OLE DB) WinCC UserArchives V7.2, V7.3
WinCC UserArchives V7.2, V7.3
WinCC RT Professional V13 SP1 WinCC RT Professional V13 SP1
(via OLE DB) (via OLE DB)
Configurable TXT/ HTML
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Benefits
All-purpose New in V7.4
- Solutions for all sectors Supports Windows 10 Professional and Enterprise (64-bit)
- Multilingual for worldwide usage
- Can be integrated into all automation solutions Extended functionality for WinCC/WebUX
- Expansion to include additional controls
All operator control & monitoring functions on board - Dynamization can be implemented with VB script and
- User administration dynamic response dialog
- Operator control and monitoring
- Reporting, acknowledging, and archiving of events Expansion of the SIMATIC S7-1200 and
- Collecting, consolidating and archiving measured values S7-1500 communication channels
(including long-term backup) - Increased number of connections
- Logging and documenting of process and configuration (S7-1500 with up to 128 connections)
data - Transmission of byte data blocks
Can be configured simply and efficiently Easier configuration with WinCC Configuration Studio
- Configuration wizards let the user focus on the essentials - Efficient engineering with "drag-and-drop"
- In the picture by means of cross-reference lists and screen - VBA in the WinCC Configuration Studio
property displays Simplified runtime operation
- Configuration of multilingual applications
- Configuring tool for configuring bulk data
- Touch operation in runtime (zoom and pan within "right click"
controls)
3
Universally scalable - Adapt "Favorites" system dialog in Runtime
- Expandable from single station to client-server configura- - Control toolbar size is configurable
tions Uniform license model for WinCC/DataMonitor,
- Increased availability by means of redundant servers WinCC/WebNavigator and WinCC/WebUX.
- Process visualization via the Web with the WinCC Version-independent packages can be cumulated, and
WebNavigator or WebUX WebNavigator and WebUX licenses can be combined
Open standards for simple integration Extended functionality for the WinCC Graphics Designer
- Powerful real-time database Microsoft SQL Server 2008 R2 Introduction of new controls (BarChartControl for displaying
SP2 (32-bit) archive tags in a bar chart, and SysDiagControl for system
- Open for application modules with ActiveX controls diagnostics of S7-1200/1500 controllers)
- Visual Basic for Applications for individual expansions
- OPC for cross-vendor communication New "OPC UA WinCC Channel" communication channel
Process visualization with Plant Intelligence Remote maintenance via Remote Desktop Protocol
- Integrated evaluation functions for the online analysis and more ...
(statistical process control)
- Production optimization with the help of diverse options New in V7.3
Expandable using options and add-ons Expansion into Graphic Designer
- Options for scalable configurations - Support of SVG image objects and Direct2D
- Options for increasing the availability Expansion of WinCC Configuration Studio
- Options for IT & business integration (configuration options as in Excel)
- Options for SCADA expansions - Alarm Logging
- Options for validation in accordance with - Tag Logging
FDA 21 CFR Part 11 - User Archive
- Options for the use of telecontrol protocols - Text Library
Part of Totally Integrated Automation Expansion of communication channels
- Direct access to the tag and message configuration of the - Communication channel to new CPU (S7-1200 / S7-1500)
SIMATIC control system (support of symbolic address and CPU alarming)
- Integrated diagnostic functions for increasing productivity - OPC UA Server A&C (Alarm & Condition)
Encrypted communication
- SSL encryption for communication of terminal bus
Multi-user engineering for integrated projects
and more ...
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
3
153 600, 262 144 PowerTags. PowerTags are data points that are
For managing users and authorizations
connected to controllers or other data sources over a WinCC
channel. Up to 32 alarms can be obtained from one data point. WinCC Report Designer Reporting and logging system for time and
Moreover, internal tags without coupling are available for addi- event-controlled documentation of
messages, operator inputs and current
tional system performance. In addition WinCC also contains process data in the form of user reports or
512 archive tags. Additional archive licenses can be obtained project documentation in an arbitrary layout
for larger quantity structures.
WinCC Global Script Processing functions with limitless
Licenses for a multi-user configuration functionality by means of the use of VBScript
and ANSI-C
The system software with the required number of PowerTags and
additionally the option WinCC/Server must be installed on the Interfaces
WinCC server. In the basic configuration, one RT Client License
Task or configurable runtime functionality
is sufficient for the WinCC Clients 1). An RC Client License is
required to configure on clients 1). Remote configuration is Communication channels For communication with subordinate controls
possible if WinCC Clients without their own project (Uni Client) (SIMATIC protocols, PROFIBUS DP,
PROFIBUS FMS, DDE and OPC server
are configured on the server project. included in the scope of delivery)
1) Standard interfaces For the open integration of other Windows
The SQL Server Express is installed for RT / RC Clients. applications via WinCC, WinCC-OLE-DB,
ActiveX, OLE, DDE, OPC, etc.)
Function Programming ports For the individual access to data and func-
tions of WinCC and for the integration in user
programs with VBA, VB Script, C-API (ODK),
The powerful configuration functions of SIMATIC WinCC contrib- C-Script (ANSI-C)
ute to a reduced engineering and training overhead and lead to
a more flexible use of personnel and greater operational reliabil-
ity.
Anyone familiar with Microsoft Windows can also operate the
WinCC Explorer, the central switching point of WinCC.
Even large quantities of data can be processed intuitively and
efficiently with the WinCC Configuration Studio.
In combination with other SIMATIC components, the system is
also equipped with auxiliary functions, such as process diag-
nostics and maintenance. All SIMATIC engineering tools work
together in the configuration of the functions.
SIMATIC WinCC offers a complete basic functionality for
process visualization and operation. To this end WinCC has a
number of editors and interfaces that can be used to individually
configure this functionality according to the respective
application. Expansions of a WinCC station for control tasks
are also possible with minimal engineering effort.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Integration
Integration in company-wide solutions Number of connectable controllers
(IT and business integration)
For the number of controllers which can be connected via
WinCC is based on Microsoft technology, which ensures open- Industrial Ethernet CP 1613, the following applies to a message
ness and integration capability. ActiveX and .net controls facili- frame length of 512 bytes:
tate technology-specific and industry-specific expansions.
Cross-manufacturer communication is also possible since Type of connection Number of nodes
WinCC can be used as an OPC client and server in addition to SIMATIC S5 Ethernet Layer 4 up to 60
accessing current process values and supporting standards + TCP/IP
such as OPC HDA (Historical Data Access), OPC Alarm & SIMATIC S7 Protocol Suite up to 64
Events, OPC XML Data Access, and OPC UA.
SIMATIC 505 Ethernet Layer 4 up to 60
Just as important: Visual Basic for Applications (VBA) is avail- + TCP/IP up to 128
able for user-specific expansions in engineering and Visual OMS+
Basic Scripting (VBS) as an easy-to-learn, open, runtime
language. If desired, professional application developers can Via PROFIBUS, a maximum of 8 controllers can be connected
also use ANSI-C. The Open Development Kit (ODK) simplifies with CP 5612, and a maximum of 44 controllers with CP 5613.
access to the API programming interfaces.
WinCC integrates a powerful and scalable archiving functional-
Industrial Ethernet is recommended when 10 or more controllers
are used. 3
ity based on Microsoft SQL Server 2014 SP1 into the basic Mixed operation with different controllers
system. This gives the user multiple and varied options: With their multi-protocol stack, the CP 1613 and CP 5613
from high-performance archiving of current process data, communication processors enable the parallel operation of two
to long-term archiving with high data compression, through to protocols, such as for the mixed operation of different control-
a connection to the central information hub in the form of a lers, via a single bus cable. WinCC supports the operation of two
company-wide process historian. Versatile clients and tools similar interface boards only in connection with the channels
for evaluation, the open interfaces, and special options SIMATIC S5 Ethernet Layer 4 (2 x CP 1613), SIMATIC S7
(Connectivity Pack, Connectivity Station, IndustrialDataBridge) Protocol Suite (2 x CP 1613, 2 x CP 5613) as well as
provide the basis for effective IT and business integration. PROFIBUS DP (4 x CP 5613; max. 122 slaves for each
WinCC offers various security mechanisms, such as encrypted CP 5613). In addition to communication via Industrial Ethernet
communication, to ensure secure operation of the plant. If exter- CP 1613 or PROFIBUS CP 5613, one CP 5612/5622 can be used
nal networks are accessed, for example, suitable protective in each case for communication with SIMATIC S7 via MPI.
measures (incl. IT security measures, such as network segmen-
tation) should still also be taken. Client-server communication
You can find more information on the topic of Industrial Security Communication between the clients and the server is via TCP/IP
on the Internet at: protocol. Setting up a separate PC LAN is recommended. For
small projects with a correspondingly low incidence of message
http://www.siemens.com/industrialsecurity frames, SIMATIC NET Industrial Ethernet communication can be
used for both process communication (WinCC/Server PLC)
Integration in automation solutions and PC-PC communication (WinCC/client WinCC/server).
WinCC is an open process visualization system and provides the Channel DLL PROFIBUS DP
option to connect the most diverse control systems.
In accordance with the PROFIBUS standard, DP/slaves are
Approved communication software always permanently assigned to a DP master; i.e. a second
Use communication software with the listed product versions WinCC station (DP/master) cannot access the same controllers
(or higher). Corresponding SIMATIC NET upgrades are available (DP/slaves). This means that redundant operation of two WinCC
for upgrading older versions. stations is not possible using the PROFIBUS DP connection.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Integration (continued)
Connection to controllers from other manufacturers:
If a native driver is not available, OPC (OLE for process control) WinCC supports the standards:
is available for connection to third-party controllers. OPC Data Access 2.05a
Current notes and information about OPC servers from various OPC Data Access 3.00
suppliers can be found at: OPC XML Data Access 1.00 (Connectivity Pack/Connectivity
http://www.opcfoundation.org Station)
OPC HDA 1.20 (Connectivity Pack/Connectivity Station)
OPC A&E 1.10 (Connectivity Pack/Connectivity Station)
OPC UA Client Data Access
OPC UA Server Data Access, HDA, Alarm & Condition
(Connectivity Pack / Connectivity Station)
Connection overview
3 Protocol Description Protocol Description
SIMATIC S7 Third-party controllers
SIMATIC S7 Protocol Suite Channel DLL for S7 functions via MPI, Allen Bradley Channel DLL and drivers for
PROFIBUS or Ethernet Layer 4 + Ethernet IP communication with Allen Bradley
TCP/IP controllers via Ethernet TCP/IP using
Ethernet IP protocol
SIMATIC S5
Modbus TCP/IP Channel DLL and drivers for
SIMATIC S5 Ethernet Layer 4 Channel DLL for communication with Modicon
S5 Layer 4 communication + TCP/IP controllers via Ethernet TCP/IP using
SIMATIC S5 Programmer Port AS511 Channel DLL and driver for Modbus TCP/IP protocol
serial communication with S5 using Mitsubishi MC TCP/IP Channel DLL and drivers for
AS511 protocol to programmers port communication with Mitsubishi
SIMATIC S5 Serial 3964R Channel DLL and driver for controllers via Ethernet TCP/IP using
serial communication with S5 using Mitsubishi MC TCP/IP protocol
RK512 protocol Cross-manufacturer
SIMATIC S5 PROFIBUS-FDL Channel DLL for S5-FDL OPC Client for DA, XML DA Channel DLL for
SIMATIC 505 OPC communication,
WinCC can acquire data from
SIMATIC 505 Serial Channel DLL and driver for OPC server applications.
serial communication with 505 using
NITP/TBP protocol to OPC Server for DA, XML DA, A&E, Server applications for
SIMATIC 535/545/555/565/575 HDA OPC communication;
WinCC provides process data to
SIMATIC 505 Ethernet Layer 4 Channel DLL for OPC Clients
505 Layer 4 communication
OPC UA server for DA, HDA, A&C Server applications for
SIMATIC 505 TCP/IP Channel DLL for OPC UA communication
505 TCP/IP communication
PROFIBUS FMS Channel DLL for PROFIBUS FMS
SIMATIC S7-1200, S7-1500
PROFIBUS DP Channel DLL for PROFIBUS DP
SIMATIC S7-1200, S7-1500 Channel Channel DLL for
S7-1200 and S7-1500 communication SIMOTION Channel DLL for SIMOTION
Application note:
Parallel usage of the OPC client channel allows, for example,
connection to an SNMP-OPC server for visualization of the data
contained there. The SNMP OPC server enables monitoring of
any network components (such as switches) that support the
SNMP protocol. You can find more information under SIMATIC
NET Communications Systems/SNMP OPC Server.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Integration (continued)
Communication components for PG/PC for SIMATIC (for WinCC V7.4)
Industrial Ethernet SIMATIC S5 SIMATIC S5 SIMATIC S7 SIMATIC 505 SIMATIC 505 Article No.
Ethernet TCP/IP Protocol Ethernet TCP/IP 1)
Layer 4 Suite Layer 4
WinCC channel DLL
SIMATIC S5 Ethernet Layer 4 Included in the basic
Channel DLL for package
S5 Layer 4 communication + TCP/IP
SIMATIC S7 Protocol Suite Included in the basic
Channel DLL for S7 functions package
SIMATIC 505 Ethernet Layer 4 Included in the basic
Channel DLL for 505 Layer 4 communication package
SIMATIC 505 TCP/IP 1) Included in the basic
Channel DLL for 505 TCP/IP communication package
Communication components for extension of the OS/OP
CP 1612 A2
PCI card for connecting a PG/PC to
6GK1161-2AA01 3
Industrial Ethernet (SOFTNET-S7 or
SOFTNET-S7 Lean communication software
must be ordered separately)
SOFTNET-IE S7 6GK1704-1CW13-0AA0
communication software for
S7 functions (max. 64 connections)
Version 13 SP2 2)3)
for Windows 7 SP1 (32/64-bit), Windows 8.1
(32/64-bit), Windows 2008 R2 SP1 Server,
Server 2012 R2 (64-bit), and
Windows 10 (64-bit)
SOFTNET-IE S7 Lean 6GK1704-1LW13-0AA0
communication software for
S7 functions (max. 8 connections)
Version 13 SP2 2)3)
for Windows 7 SP1 (32/64-bit), Windows 8.1
(32/64-bit), Windows 2008 R2 SP1 Server,
Server 2012 R2 (64-bit), and
Windows 10 (64-bit)
CP 1613 A2 6GK1161-3AA01
PCI card (32-bit) for connecting a PG/PC to
Industrial Ethernet (S7-1613 communication
software required)
CP 1623 6GK1162-3AA00
PCI Express X1 card (32-bit) for connecting a
PG/PC to Industrial Ethernet
(S7-1613 communication software required)
CP 1628 6GK1162-8AA00
PCI Express X1 card (32-bit) for connecting a
PG/PC to Industrial Ethernet
(HARDNET-IE S7 / S7-1613 communication
software required)
HARDNET-IE S7 / S7-1613 6GK1716-1CB13-0AA0
communication software for S7 functions,
OPC, PG/OP communication
Version 13 SP2 2)3)
for Windows 7 SP1 (32/64-bit), Windows 8.1
(32/64-bit), Windows 2008 R2 SP1 Server,
Server 2012 R2 (64-bit), and
Windows 10 (64-bit)
1)
Via any interface board with NDIS 3.0 interface; no separate communi-
cation software required
2)
See ordering data for SIMATIC NET upgrade packages
3)
SIMATIC NET Version 12 SP2 is supplied together with WinCC V7.4
4)
SOFTNET-S7 Lean is included in the scope of supply of WinCC V7.4
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Integration (continued)
Communication components for PG/PC for SIMATIC (for WinCC V7.4)
PROFIBUS SIMATIC S5 SIMATIC S7 PROFIBUS DP PROFIBUS FMS Article No.
PROFIBUS FDL Protocol Suite
WinCC channel DLL
SIMATIC S5 PROFIBUS FDL Included in the basic
Channel DLL for S5-FDL package
SIMATIC S7 Protocol Suite Included in the basic
Channel DLL for S7 functions package
PROFIBUS DP Included in the basic
Channel DLL for PROFIBUS DP package
Communication components for extension of the OS/OP
CP 5612 2) 6GK1561-2AA00
PCI card (32-bit) for connecting a PG/PC
to PROFIBUS (communication software
included in WinCC basic package)
3 CP 5622 2)
PCI Express X1 card (32-bit) for
6GK1562-2AA00
1)
See ordering data for SIMATIC NET upgrade package
2)
SIMATIC NET Version 8.2 SP1 is supplied together with WinCC V7.4
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Integration (continued)
Communication components for PG/PC for SIMATIC (for WinCC V7.3)
Industrial Ethernet SIMATIC S5 SIMATIC S5 SIMATIC S7 SIMATIC 505 SIMATIC 505 Article No.
Ethernet TCP/IP Protocol Ethernet TCP/IP 1)
Layer 4 Suite Layer 4
WinCC channel DLL
SIMATIC S5 Ethernet Layer 4 Included in the basic
Channel DLL for package
S5 Layer 4 communication + TCP/IP
SIMATIC S7 Protocol Suite Included in the basic
Channel DLL for S7 functions package
SIMATIC 505 Ethernet Layer 4 Included in the basic
Channel DLL for 505 Layer 4 communication package
SIMATIC 505 TCP/IP 1) Included in the basic
Channel DLL for 505 TCP/IP communication package
Communication components for extension of the OS/OP
CP 1612 A2
PCI card for connecting a PG/PC to Industrial
6GK1161-2AA01 3
Ethernet (SOFTNET-S7 or SOFTNET-S7 Lean
communication software must be ordered
separately)
SOFTNET-IE S7
communication software for
S7 functions (max. 64 connections)
Version 8.2 SP1 2)3) 6GK1704-1CW08-2AA0
for Windows 7 (32/64-bit) and
Server 2008 R2 (64-bit)
Edition 2008 SP6 (V7.1) 2) 6GK1704-1CW71-3AA0
for Windows XP/2003 Server/(32-bit) 2008
Server
SOFTNET-IE S7 Lean
communication software for S7 functions
(max. 8 connections)
Version 8.2 SP1 2) 4) 6GK1704-1LW08-2AA0
for Windows 7 (32/64-bit) and
Server 2008 R2 (64-bit)
Edition 2008 SP6 (V7.1) 2) 4) 6GK1704-1LW71-3AA0
for Windows XP/2003 Server / (32-bit) 2008
Server
CP 1613 A2 6GK1161-3AA01
PCI card (32-bit) for connecting a PG/PC to
Industrial Ethernet
(S7-1613 communication software required)
CP 1623 6GK1162-3AA00
PCI Express X1 card (32-bit) for connecting a
PG/PC to Industrial Ethernet
(S7-1613 communication software required)
CP 1628 6GK1162-8AA00
PCI Express X1 card (32-bit) for
connecting a PG/PC to Industrial Ethernet
(HARDNET-IE S7 / S7-1613 communication
software required)
HARDNET-IE S7 / S7-1613
communication software for
S7 functions and S5/505 Layer 4
communication with TCP/IP
Version 8.2 SP1 2)3) 6GK1716-1CB08-2AA0
for Windows 7 (32/64-bit) and
Server 2008 R2 (64-bit)
Edition 2008 SP6 (V7.1) 2) 6GK1716-1CB71-3AA0
for Windows XP/2003 Server / (32-bit) 2008
Server
1)
Via any interface board with NDIS 3.0 interface; no separate communi-
cation software required
2)
See ordering data for SIMATIC NET upgrade packages
3)
SIMATIC NET Version 8.2 SP1 is supplied together with WinCC V7.3
4)
SOFTNET S7 Lean included in scope of supply of WinCC V7.3
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Integration (continued)
Communication components for PG/PC for SIMATIC (for WinCC V7.3)
PROFIBUS SIMATIC S5 SIMATIC S7 PROFIBUS DP PROFIBUS FMS Article No.
PROFIBUS FDL Protocol Suite
WinCC channel DLL
SIMATIC S5 PROFIBUS FDL Included in the basic
Channel DLL for S5-FDL package
SIMATIC S7 Protocol Suite Included in the basic
Channel DLL for S7 functions package
PROFIBUS DP Included in the basic
Channel DLL for PROFIBUS DP package
PROFIBUS FMS Included in the basic
Channel DLL for PROFIBUS FMS package
Communication components for extension of the OS/OP
CP 5612 2) 6GK1561-2AA00
1)
See ordering data for SIMATIC NET upgrade package
2)
SIMATIC NET Version 8.2 SP1 is supplied together with WinCC V7.3
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Integration (continued)
Communication examples
PROFIBUS
G_ST80_XX_00010
(SIMATIC NET CD/DVD or (SIMATIC NET CD/DVD or
Internet download) Internet download )
- CP 1613 A2
Standard PC with WinCC 6GK1161-3AA01
e.g. RC 64 k or RT 64 k - CP 1623
6GK1162-3AA00
- S7-1613
(communication software)
6GK1716-1CB80-3AA0
Industrial Ethernet
- CP 443-1 (S7, S/R) ISO + TCP - CP 343-1 (S7, S/R) ISO + TCP
6GK7443-1EX30-0XE0 6GK7343-1EX30-0XE0
- CP 443-1 Advanced - CP 343-1 Advanced
(S7, S/R, HTTP) (S7, S/R, HTTP)
6GK7443-1GX30-0XE0 6GK7343-1GX31-0XE0
G_ST80_XX_00011
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Integration (continued)
- CP 5613 A2
Standard PC 6GK1561-3AA00
with WinCC - CP 5623
e.g. RC 64 k or RT 64 k 6GK1562-3AA00
+ FMS channel DLL - FMS-5613
(communication software)
6GK1713-5FB71-3AA0
PROFIBUS FMS
3
SIMATIC S7-300 SIMATIC S7-400 SIMATIC
- CP 343-5 - CP 443-5 Basic S5-115/135/155U
(FMS, S7, S/R) (FMS, S7, S/R)
6GK7343-5FA01-0XE0 6GK7443-5FX02-0XE0
- CP 5431 FMS/DP
6GK1543-1AA01
G_ST80_XX_00012
- COM 5431 FMS/DP
6GK1745-1AD00-0EA0
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Integration (continued)
Higher-level visualisation system
- OPC server functionality
(included in WinCC basic package)
- TCP-IP interface board required
OPC Client
Industrial Ethernet
- OPC Server functionality
- OPC Server On-site visualization (included in WinCC
functionality OPC Server OPC Server
basic package)
(OPC Server - TCP-IP Interface board
option for required
WinCC
required) 3
OPC Client
- integrated - OPC Client
OPC Server
PROFIBUS PROFIBUS functionality (included
interface in WinCC basic
SIMATIC SIMATIC
package)
S7-300 S7-400
- OPC Server required
third-party for interfacing with
PLCs
G_ST80_XX_00015
third-party PLCs
OPC link
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
Technical specifications
Type SIMATIC WinCC V7.4 3) SIMATIC WinCC V7.3
Operating system Windows 10 (64-bit) Professional, Enterprise Windows 7 (32-bit / 64-bit) Ultimate, Professional and
Windows 7 (32-bit / 64-bit) Ultimate, Professional and Enterprise
Enterprise Windows 8.1 (32-bit / 64-bit) Professional and Enterprise
Windows 8.1 (32-bit / 64-bit) Professional and Enterprise Windows Server 2008 SP2 (32-bit) Standard
Windows Server 2008 R2 SP1 (64-bit) Standard Windows 2008 Server R2 SP1 (64-bit) Standard
Windows Server 2012 R2 (64-bit) Standard Windows Server 2012 R2 (64-bit) Standard
PC hardware requirements
Processor type 1)
Minimum Single-user station/server: Dual-core; 2.5 GHz 2) Single-user station/server: Pentium 4; 2.5 GHz 2)
2)
Client: Dual-core; 2.5 GHz Client: Pentium 3; 1 GHz 2)
Web client: Dual-core; 2 GHz WebClient/DataMonitor Client: Pentium III, 600 MHz 2)
Recommended Single-user station/server: Multi-core; 3.5 GHz 2) Single-user station/server: Pentium 4 or dual-core;
3 GHz 2)
3 Client: Multi-core; 3 GHz 2) Client: Pentium 4, 2 GHz 2)
Web client: Dual-core; 3 GHz WebClient/DataMonitor Client: Pentium III, 1 GHz
RAM
Minimum Windows 7/ Windows 8.1 (32-bit) Single-user station / server: 8 GB 2)
Single-user station/server: 2 GB
Client: 1 GB
Web client: 1 GB
Windows 7/ Windows 8.1/ Windows 10 (64-bit) Client: 4 GB 2)
Single-user station/server: 4 GB
Client: 2 GB
Web client: 1 GB
Windows Server 2008 R2/ Windows Server 2012 R2 WebClient/DataMonitor Client: 512 MB 2)
Server: 4 GB
Recommended Windows 7/ Windows 8.1 (32-bit) Single-user station / server: 16 GB 2)
Single-user station/server: 3 GB
Client: 2 GB
Web client: 2 GB
Windows 7/ Windows 8.1/ Windows 10 (64-bit) Client: 8 GB 2)
Single-user station/server: 4 GB
Client: 4 GB
Web client: 2 GB
Windows Server 2008 R2/ Windows Server 2012 R2 WebClient/DataMonitor Client: 1 GB 2)
Server: 8 GB
Graphics card
Minimum 16 MB, 800 x 600 2) 16 MB, 800 x 600 2)
Recommended 32 MByte, 1 920 x 1 080 2) 32 MB, 1 280 x 1 024 2)
Hard disk
Minimum Single-user station/server: 80 GB Single-user station/server: 80 GB
Client: 20 GB Client: 20 GB
WebClient/DataMonitor Client: 5 GB WebClient/DataMonitor Client: 5 GB
Recommended Single-user station/server: 160 GB Single-user station/server: 160 GB
Client: 40 GB Client: 40 GB
WebClient/DataMonitor Client: 10 GB WebClient/DataMonitor Client: 10 GB
Hard disk
(available memory for installation)
- Minimum Server: > 1.5 GB
Client: 1.5 GB
- Recommended Server: > 10 GB
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
1)
According to licensing provisions, 1 upgrade package must be ordered for
each WinCC station
2)
Upgrading from V7.0 RT/RC ASIA to V7.3 ASIA is carried out using the
"respective non-Asia package"
3)
The Software Update Service is valid for 1 year. The contract is automati-
cally extended by 1 more year unless canceled 3 months prior to
expiration. According to licensing provisions, 1 Software Update Service
must be ordered for each WinCC station.
4)
Requires the current software version
5)
SUS is available as download
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC V7
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
Introduction
3
WinCC/Event Notifier
For sending of notifications triggered by specific events in the
WinCC message system
WinCC/PerformanceMonitor
The universal WinCC basic software is the basis for modular Analysis and optimization of production on the basis of
expansions. These functional expansions can be obtained in the individual performance indicators
form of WinCC options and as WinCC Premium add-ons. WinCC/SES (Sequence Execution System)
WinCC options are created by WinCC Development and are Sie- Scalable sequence control for sequence-based processes
mens Industry Automation products. You can obtain support WinCC/User Archives
from our Advisory Services and via the central hotline. For managing data records in user archives
Options for scalable plant configurations Options for openness and individual system expansions
SIMATIC Process Historian WinCC/Connectivity Pack
Central, scalable long-term archive for the whole plant Access to WinCC logs via OPC HDA, OPC A&E,
http://www.siemens.com/wincc-process-historian OPC XML Server, OPC UA Server/Client and
WinCC/Redundancy WinCC OLE-DB /OLE-DB
For increasing system availability through redundancy WinCC/Connectivity Station
WinCC/Server Gateway to WinCC server data via OPC HDA, OPC A&E,
For configuring a powerful client/server system OPC XML server, OPC UA Server/Client,
and WinCC OLE-DB /OLE-DB from independent computers
WinCC/TeleControl
For connecting outlying stations (remote terminal units = WinCC/IndustrialDataBridge
RTUs) via telecontrol protocols in a WinCC SCADA system Configurable connection to databases and IT systems
http://www.siemens.com/industrial-data-bridge
WinCC/WebNavigator
For controlling and monitoring plants via the Internet, in-house WinCC/ODK (Open Development Kit)
intranet or LAN For the use of open programming interfaces and the gener-
ation of customer-specific WinCC ActiveX objects
WinCC/WebUX
For controlling and monitoring plants, independent of You can find more information under:
platforms and browsers, via the Internet, in-house intranet or
LAN http://www.siemens.com/simatic-wincc-options
More information
WinCC options
http://www.siemens.com/wincc-options
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
SIMATIC Information Server
Overview
Microsoft Office
Dashboard WinCC (Excel/ Word / Powerpoint)
Dashboard PCS 7
Information Information
Server Server
Information
Server
SIMATIC
Information Server
WinCC reports
3
WinCC V7
PCS 7 systems
systems
G_ST80_XX_00594
WinCC RT
Professional
systems
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
SIMATIC Information Server
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
SIMATIC Information Server
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
SIMATIC Process Historian
Overview
Microsoft Office
Dashboard WinCC (Excel/ Word / Powerpoint)
Dashboard PCS 7 SIMATIC SIMATIC
Information Information
SIMATIC
Server Server
Information
Server SIMATIC
Process Historian
WinCC reports
3
WinCC V7
PCS 7 systems
systems
G_ST80_XX_00604
WinCC RT
Professional
systems
The Process Historian is a powerful, long-term-archive server SIMATIC Process Historian 2014 SP2
solution that stores the WinCC process values and messages in Central, plant-wide long-term archive as corporate information
a central database. The system offers full scalability for perfor- hub
mance and scope. It records and stores data from one or more
WinCC, WinCC RT Professional and PCS 7 projects. The number Real-time archiving of process values and messages from:
of connected single stations, servers, or redundant server pairs - WinCC V7.0 SP3, V7.2, V7.3, V7.4
is unrestricted. SIMATIC Process Historian is designed for use - Data migration, WinCC V 6.2 SP 3 and higher
throughout your plant, and is positioned below the corporate - WinCC/Performance Monitor V7.3 or V7.4
management level (ERP, MES). - WinCC RT Professional, V13 SP1 and higher
- PCS7 V8.0, V8.1
The SIMATIC Information Server is used as a reporting system - SIMATIC BATCH
for the Process Historian. It accesses the central database of the High performance with very large data volumes
Process Historian and visualizes the data in clear, user-friendly
displays on WinCC stations or office PCs. The central Process Data access via OPC UA Server
Historian database provides access to real-time data throughout Migration support for data migration from
the plant. This data is the key to sustainable plant optimization WinCC/ Storage plus, CAS Storage plus and
measures. Since the archive system can be fully integrated, no WinCC segments.
additional engineering is required. SIMATIC Process Historian High availability thanks to redundancy concept with
uses the integrated relational database, SQL Server from observer/witness server for increasing data integrity
Microsoft. No complex reconfiguration is needed because the
archive system is integrated into WinCC. Selected WinCC pro- High degree of security due to integrated, complete backup
cess values or messages are archived long-term on a time or and restore of all segments (disaster recovery)
event-driven basis. Enhanced data security through store and forward
The Process Historian is used for the long-term archiving of mechanism
process values and messages. Scalable without breaks in production
Maximum data transparency
High degree of security thanks to integrated backup system
Simple and fast management and diagnostics with the
Process Historian Management "Dashboard"
Backup & Restore for PCS 7 Batch
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
SIMATIC Process Historian
Fully integrated archiving solution for large volumes of data 2 x Process Historian Server
2 x Process Historian Server
Central, plant-wide long-term archive as corporate information Redundancy
hub Single License Redundancy 6AV6361-1CA00-0AJ0
Real-time storage of the WinCC archive data (process values Process Historian 2013 to
and messages) from any number of WinCC stations Process Historian 2014 SP1
Upgrade from CAS V6.2 to V7.0 6AV6371-1DQ17-0XX3
Visualization of the archive data on WinCC clients or WinCC SP3
single stations either directly or using the SIMATIC Information Upgrade from CAS V6.2 ASIA to 6AV6371-1DQ17-0XV3
Server. Process Historian configuration tool for quick and easy V7.0 SP3 ASIA
engineering
The redundant Process Historian is based on Microsoft SQL
Server Mirroring (3rd system for monitoring redundancy avail-
ability)
High degree of security due to integrated complete backup
and restore of all segments
During the initial configuration the database and the segmen-
tation are set up.
The PH-Ready component is installed on the WinCC server for
the process of archiving to the PH
The PH automatically detects all connected WinCC server
projects (via the PH-Ready component)
The Process Historian Management "Dashboard" enables
simple and fast management and diagnostics
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/Calendar Scheduler
Overview Function
With the WinCC Calendar Scheduler, events and their associ-
ated actions can be configured in a user-friendly and clear way
in an editor in WinCC Explorer.
The events are represented in a calendar. The period repre-
sented can be freely selected. Recurring events can be defined
as serial events with any desired exceptions.
The events are displayed in a .Net control. The Calendar
Scheduler is easy and intuitive to operate and supports
drag & drop during configuration and runtime.
WinCC/Calendar Scheduler
WinCC V7.4 6AV6372-1DC07-4AX0
WinCC V7.3 6AV6372-1DC07-3AX0
as download
WinCC V7.4 6AV6372-1HC07-4AX0
3
WinCC V7.3 6AV6372-1HC07-3AX0
V7.x -> V7.4 6AV6372-1KC07-4AX3
V7.0/7.2 -> V7.3 6AV6372-1KC07-3AX3
Option for SIMATIC WinCC for managing events in a calendar. Upgrade
Setting WinCC variables or starting global scripts at defined V7.x -> V7.4 6AV6372-1DC07-4AX3
times. V7.0/7.2->V7.3 6AV6372-1DC07-3AX3
A license is only necessary on the server (or single user
system).
Benefits
Simple operation, configuration and planning of events thanks
to handling in the style of Microsoft Office Calendar
Simple configuration of the actions by parameterization
(execution of WinCC scripts or writing of WinCC tags at certain
times)
Configuration of recurring events taking account of configu-
rable public holidays, vacation periods, and maintenance
periods
Secure operation of the plant taking account of different
authentication levels
Clear representation of events at runtime by means of
Calendar Runtime Control
Flexible use in all typical WinCC plant configurations,
client/server, redundant systems, WebNavigator
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/ChangeControl & WinCC/Audit
Overview Benefits
Quick and easy traceability configuration
Gap-free and automated recording of engineering changes
and operator actions in an audit trail
Reduction in plant downtimes thanks to fast analysis of the
gap-free recorded audit trail information
Logging of defined WinCC project status with all database
information and files of the application
Gap-free documentation of the project version definition
procedures with version number, user and comments
Complete tracing support by WinCC single and multi-station
systems, single and multi-project solutions, Client/Server
architecture
Extensive reduction in engineering outlay in order to meet the
requirements of FDA 21 CFR Part11 & EU 178/2002
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/ChangeControl & WinCC/Audit
WinCC/ChangeControl WinCC/ChangeControl
For the configuration of the audit
WinCC/ChangeControl is a functional subset of WinCC/Audit. trail incl. RT
WinCC/ChangeControl is for tracing engineering changes in the WinCC V7.4 6AV6371-1DV27-4AX0
engineering phase or in online operation. All change data is WinCC V7.3 6AV6371-1DV27-3AX0
recorded in an audit trail.
as download
There are two types of engineering changes: WinCC V7.4 6AV6371-1HV27-4AX0
those that change the WinCC database or are executed WinCC V7.3 6AV6371-1HV27-3AX0
through the WinCC Explorer, such as e.g. changes to tag WinCC/Audit RC
management or creating a user group,
For the configuration of the audit
and those trail incl. RT
WinCC V7.4 6AV6371-1DV17-4AX0
limited to changing files, the so-called document
administration. WinCC V7.3 6AV6371-1DV17-3AX0
as download
The document management manages system images, scripts WinCC V7.4 6AV6371-1HV17-4AX0
and log layouts and customer-specific documents and stores
respective intermediate versions as backups. All of these docu-
WinCC V7.3
WinCC/Audit RT
6AV6371-1HV17-3AX0
3
ments or files are subject to a change process, i.e. documents
can be booked out for processing, booked in for finalization and Creation of audit trails in RT
intermediate versions can be retrieved from backup storage with WinCC V7.4 6AV6371-1DV07-4AX0
a rollback function. WinCC V7.3 6AV6371-1DV07-3AX0
The project version definition as a component of as download
WinCC/ChangeControl archives WinCC projects and creates WinCC V7.4 6AV6371-1HV07-4AX0
reproducible project status or defined start-time points for WinCC V7.3 6AV6371-1HV07-3AX0
starting tracing. An audit trail is also provided with information on Upgrades
who has created which project version or which version has
been reproduced or deleted. V7.x to V7.4
for WinCC/Audit RT 6AV6371-1DV07-4BX3
Configuring the audit trail, the project version definition and the for WinCC/Audit RC or 6AV6371-1DV17-4BX3
document management is simple, quick and comfortable. WinCC/ChangeControl
The audit trail data is visualized from WinCC, as well as from as download
WinCC flexible via the audit viewer, an executable program WinCC/Audit RT 6AV6371-1KV07-4BX3
under Windows. The data can also be evaluated with the audit for WinCC/Audit RC or 6AV6371-1KV17-4BX3
viewer OCX in Runtime by WinCC however. Users select the WinCC/ChangeControl
desired view of the audit trail information via filters or selection V7.x to V7.3
criteria and can export the data to an Excel file or print it on a for WinCC/Audit RT 6AV6371-1DV07-3BX3
printer. Audit trail information is tamper-proof and can thus not for WinCC/Audit RC or 6AV6371-1DV17-3BX3
be modified or deleted. An export function can be used to swap WinCC/ChangeControl
out the audit trail to an XML file or to archive it. as download
WinCC/Audit RT 6AV6371-1KV07-3BX3
WinCC/Audit
For WinCC/Audit RC or 6AV6371-1KV17-3BX3
WinCC/Audit has all of the functionality of WinCC/ChangeControl WinCC/ChangeControl
and is also used for tracing user operations in RT operation. V6.x to V7.3
Tracing can be used for determining who, when and what con- for WinCC/Audit RT 6AV6371-1DV07-3BX4
ditions the machine has undergone. In addition to recording op- for WinCC/Audit RC or 6AV6371-1DV17-3BX4
erator activities, the audit trail also records the starting and mod- WinCC/ChangeControl
ifying of recipes or user logs. At specific objects or events, such as download
as function buttons or sliders, the user can also record activities WinCC/Audit RT 6AV6371-1KV07-3BX4
of an individual nature such as e.g., pressing a function button,
For WinCC/Audit RC or 6AV6371-1KV17-3BX4
moving sliders and other actions with a so-called audit entry WinCC/ChangeControl
function in the audit trail.
WinCC/Audit is not released for virtualization and redundancy.
A WinCC/ChangeControl RC license or a WinCC/Audit RC
license is required for configuring the audit trail. One RT license
is required for each station (client/server) to be monitored. One More information
RC license always includes one RT license.
Information about FDA can be found in a White Paper:
Declaration of conformity of SIMATIC WinCC to
FDA21 CFR Part 11.
http://www.siemens.com/automation/hmi/html_76/products/
software/wincc/fda01.htm
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/Connectivity Pack & WinCC Connectivity Station
Overview
VB (.NET), C#
MES ERP MES
VBScript, VBA
Online data access Online messages Online data access Access to database through
(to tags) (Forward / Acknowledge) (to historical data) 3rd party application
* * *
OPC A&E
OPC UA DA OPC XML DA OPC A&E (historical) OPC HAD WinCC OLE DB
3 (client) (server/client) (server) (server) (server)
WinCC/ConnectivityPack
G_ST80_XX_00066
SIMATIC WinCC MS SQL Server
Cross-vendor communication in the automation sector has The Connectivity Pack includes OPC XML DA 1.00,
always been of primary importance for WinCC. This is even more OPC HDA 1.20 (Historical Data Access), OPC A&E 1.10
true for the release of preprocessed production data for higher- (Alarm & Events) as well as a WinCC OLE-DB interface, which
level information systems (e.g., MES = Management Execution also gives remote computers without installed WinCC access
System, ERP = Enterprise Resource Planning or Office to WinCC archive and alarm data.
packages = MS Excel, MS Access etc.). WinCC features The function of the OPC servers (XML DA, HDA and A&E) and
integrated OPC Data Access and OPC XML DA servers for the OPC UA servers (DA, HDA, AC) is assured by the
access to all online values in the system and makes open WinCC/Connectivity Pack. In order to access data in the
interfaces available for access to historical WinCC data. database via WinCC OLE-DB/OLE-DB, you will also need a
license for the WinCC/Connectivity Pack.
A Connectivity Pack license is required for every
WinCC system to be accessed.
If the Connectivity Station is used, an additional Connectivity
Pack license does not have to be installed on the WinCC
systems that are accessed. The Connectivity Station functions
autonomously and does not require a WinCC installation on
the computer.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/Connectivity Pack & WinCC Connectivity Station
Function Licensing
You require the "WinCC Connectivity Station" license in order
As an OPC HDA server, WinCC makes historical data from the to utilize the OPC interfaces of the Connectivity Station on a
WinCC archive system available to other applications. computer without WinCC installed.
An OPC HDA client (e.g. a reporting tool) can define the time
interval for the required data by entering a start and end time. If you only use the OPC interfaces of a WinCC installation,
OPC HDA servers also support the generation of a variety of you only need the "Connectivity Pack" license.
aggregate functions on the server itself (e.g. standard deviation, The following table shows the combinations:
variance, mean values, integral values, etc.), thereby helping to
relieve the load on the network, as only preprocessed data are New: WinCC-independent Standard installation:
transmitted.
OPC A&E servers are used to forward WinCC messages (along
installation with
Connectivity Station
OPC with WinCC
3
OPC DA "WinCC Connectivity Station" No license required
with all associated process values) to any client at production or license
enterprise control level. Filter mechanisms and subscriptions en-
sure that only selected modified data are transmitted. Acknowl- OPC HDA "WinCC Connectivity Station" "WinCC Connectivity Pack"
license license
edgement is of course also supported.
OPC A&E "WinCC Connectivity Station" "WinCC Connectivity Pack"
The WinCC OPC XML DA server makes cross-platform commu- license license
nication between Windows and non-Windows systems possible,
OPC UA DA "WinCC OPC UA HDA / AC
even via the Internet. This enables read and write WinCC online Connectivity Pack" license
values (external and internal WinCC variables) to be exchanged
with non-Siemens systems. The Connectivity Station is planned over NCM PC Manager or
SIMATIC Manager. In the versions 7.0 and higher, the
WinCC OLE-DB makes standardized and user-friendly access to
Connectivity Station does not run as a service.
WinCC archive data possible (MS SQL Server 2005). In exactly
the same way as access via the OPC HDA and OPC A&E inter-
faces, access via the WinCC OLE DB provider makes all WinCC Ordering data Article No.
archive data available along with the associated process values
and message/user texts. The WinCC OLE-DB provider also sup- WinCC/Connectivity Pack &
ports analysis functions such as minimum, maximum, message WinCC/Connectivity Station
hit list, etc. V7.4; for WinCC V7.4
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/DataMonitor
Overview
Dashboard SIMATIC
WinCC Information Server
Internet
WinCC WinCC SCADA client
SCADA clients + SIMATIC Information Server Dashboard
or DataMonitor server WinCC
3 LAN
WinCC server
(18 max.)
PROFINET
PROFIBUS
G_ST80_XX_00021
S7-300
S7-1500
S7-400
The WinCC/DataMonitor is a component of WinCC Plant DataMonitor does not require manual client installation
Intelligence and is used for displaying and evaluating current because it loads the required components from the
process statuses and historical data on office PCs with DataMonitor server
standard tools such as Microsoft Internet Explorer or Microsoft There is no installation required on the client for the
Excel. The DataMonitor client is provided with current and Webcenter, Trends and Alarms functions.
historic process data and alarms by a DataMonitor server. All
staff ranging from machine operators to corporate managers Licenses for simultaneous access by 1, 3, 10, 25 or 50
can use the DataMonitor to obtain information. DataMonitor clients. Any combination of DataMonitor and
WebNavigator licenses can be used for an application.
DataMonitor is a suite of Internet-capable tools:
- Process Screens - Tool for simple visualization and Preconfigured Web Center pages permit ad hoc entry
navigation with WinCC screens using WinCC Web Viewer
(WinCC Viewer RT) in "view only" mode
- Excel Workbooks - Protocol tool that integrates
WinCC archives and online values into MS Excel and
supports online analysis
- Published Reports - Event- or time-driven execution of Excel
or PDF reports for the output of process data and analysis
results
- WebCenter - Individual configuration of Internet pages and
compilation of information within a portal related to WinCC
applications.
- Trends and alarms are preconfigured Web Center pages
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/DataMonitor
Benefits
Information can be compiled online individually during New in DataMonitor
runtime via the Internet/intranet. Excel Workbook Wizard
Efficiently monitor and analyze production lines. - Settings for the properties can be saved in templates
- Display and evaluation of current process states and - For the display of messages, the time span can be
historical data on remote office PCs with standard tools such configured in a relative or absolute time format.
as Microsoft Internet Explorer or Excel. - Log File for logging events which have arisen during
- Easy access to production data via the intranet or Internet reporting.
- Quick ascertainment of the production situation WebCenter
- Use of standard products - Language-specific display of static process images in the
Easily collect and distribute information. WebCenter
- Automated report creation - Execution of time-triggered reports
- No additional configuration effort through direct use of - Configuring of different start times for reporting.
images from the WinCC project The starting and ending times can be before the report
- No training required for standard products creation time. For example, a report is created at 5 PM which
- Easy exchange of configuration data contains values for the time between 8 AM and 4 PM.
3
Substantiate decisions with reports.
- Evaluation via ready-made templates for special analyses of
the business processes (e.g. reports, statistics)
- Make bottlenecks transparent
- Individual views for user and situation
- Relative and absolute timeframe for information generation
View production status anywhere and anytime.
- Individual views of information in production
- View the process and system operation
- Historical data can be compiled online individually
Highlights
Access to the lower-level servers when installing the
DataMonitor server on a WinCC Client with separate project
(RT128 license)
Tag logging archive tags can be accessed by means of the
web center function without changing the WinCC configu-
ration system.
Installation of the DataMonitor web center function on a
WinCC file server
Dedicated Internet pages can be created for displaying data
with the Webcenter. For this purpose, the following tools which
can be integrated in the Internet sites are available.
- Bar diagram, pie chart, trend curve display
- Process value table and statistics functions for the process
values
- Alarms, hit list for alarms
- Message text display for individual message texts, message
display, selection list of created reports
- Links to internal and external pages
- Display of graphics in converted jpg format
- Display of the WinCC process images
The analyses can be made with relative or absolute time
specification. This enables comparisons of identical time
periods on different days.
Reports generated with Excel or the WinCC Report Designer
can be made available on the DataMonitor server or emailed
automatically to the relevant group of people based on time
intervals or triggered by events.
- Connections can be established to WinCC Runtime, the
central archive server, and the swapped-out archives.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/DataMonitor
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/Event Notifier
Overview Function
The WinCC Event Notifier enables the following to be configured
in a clear and user-friendly manner via the Calendar Options
Editor in the WinCC Explorer:
The e-mail service for sending and receiving messages
The messages by selecting configured messages in the
WinCC Alarm System as well the setup and contents of the
message by selecting the message blocks
Contacts by selecting predefined persons from the WinCC
user administration.
In a calendar it is then possible to select the persons to be noti-
fied within in the opened time slot from the existing contacts. If
several persons or groups of persons are set up for the same
time slot, escalation levels can be implemented by assigning dif-
ferent escalation times (= dead time before notification). The pe-
riod represented by the calendar can be freely selected. Recur-
ring events can be defined as serial events with any desired
exceptions.
3
The calendar can also be integrated as .Net Control in WinCC
screens; the appearance of the calendar controls at runtime is
configurable. Via the calendar control, you can create time slots
Option for SIMATIC WinCC for notifying selected persons by during runtime with contacts who should be notified upon occur-
email in specified time slots. rence of the configured events in the WinCC Alarm System. In
Notification depends on events occurring in the WinCC Alarm addition, the calendar control allows the creation of new con-
System. tacts by means of selection from the WinCC user management.
Escalation levels, i.e. Group 2 is only notified when nobody "on The Event Notifier is easy and intuitive to operate and supports
site" or from Group 1 has reacted within a specified time. drag & drop during configuration and runtime.
Final notification of all persons previously notified in
connection with the specific event about the reaction that has
taken place
Ordering data Article No.
WinCC/Event Notifier
A license is only necessary on the server (or single user system).
for WinCC V7.4 6AV6372-1DD07-4AX0
Benefits
for WinCC V7.3 SE 6AV6372-1DD07-3AX0
as download
Simple operation, configuration and planning of notifications for WinCC V7.4 6AV6372-1HD07-4AX0
thanks to handling like the Microsoft Office Calendar for WinCC V7.3 SE 6AV6372-1HD07-3AX0
Easy configuration of the notifications including support of the
WinCC Runtime languages by connecting to the WinCC alarm
system
Configuration of recurring events taking account of configu-
rable public holidays, vacation periods, and maintenance
periods
Secure operation of the plant taking account of different
authentication levels
Clear display and intuitive operation at runtime by means of
Calendar Control
Flexible use in all typical WinCC plant configurations, single
station, client/server, redundant systems, WebNavigator
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/IndustrialDataBridge
Overview
Microsoft Excel
SIMATIC NET OPC Server Microsoft SQL Server Oracle
File (CSV)
OPC DA & OPC XML DA Microsoft Access My SQL Server
Free Text
G_ST80_XX_00067
Microsoft SQL Server
SIMATIC WinCC WinCC OLE DB database
WinCC RT Professional Send & Receive
User Archive (Alarm, Tag Logging)
The WinCC/IndustrialDataBridge option uses standard inter- For example, SIMATIC WinCC with its OPC DA server
faces in order to connect the automation world with the world interface is the data source and an external database is the
of IT and ensure two-way information flow. Typical examples of data destination.
such interfaces are OPC in the field of automation and SQL - Very flexible, due to the support of different database
database interfaces in the world of IT. formats and standard interfaces
Using the SIMATIC WinCC/IndustrialDataBridge, communi- - Fast and safe due to configuration instead of programming
cation links between different data sources and data targets In addition to access to WinCC variables, access to
can be created by means of simple configuration/ messages, process values and user archive data (in the
programming. The IndustrialDataBridge can either be WinCC database) is also supported.
integrated into WinCC or used in stand-alone mode (not in WinCC/IndustrialDataBridge can be used as a standalone
conjunction with WinCC) application with its standard interfaces.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/IndustrialDataBridge
Benefits
Connection of the automation level to the IT world Highlights
Integration of systems from different manufacturers via No programming knowledge required
numerous standard interfaces (including OPC, OLE-DB, office Efficient due to transmission of individual data or block
formats, etc.) transfer (">", "<", "inside where)
Simple configuration using standard software without Unicode support
programming which reduces costs
Support of Asian languages (Simplified Chinese, Japanese)
High-performance data exchange between several systems
at the same time OPC XML DA Provider / Consumer (data exchange over the
Internet using http and SOAP)
WebNavigator; support of the IndustrialDataBridge controls in
WinCC images
IndustrialDataBridge runs as system service or as an
application in connection with WinCC or as a standalone
application
Design 3
The software comprises a configuration environment and a run- The connections between data source and data destination are
time environment. The different data interfaces are integrated via created in the configuration environment. In the runtime environ-
software modules. In each case, one module is required as the ment, the IndustrialDataBridge establishes the connection au-
data source and one module as the data destination. The differ- tonomously and transfers the data of the linked variables.
ent modules can be combined in any way.
Function
Storage of process data in Office formats such as Excel or
Access. Databases can also be integrated for the archiving of
larger aggregates.
One of the features of IndustrialDataBridge is a Send/Receive
interface supporting data transfer to SIMATIC S5/S7 stations
or other Send/Receive-compatible devices.
IndustrialDataBridge enables SCADA and control systems
from different vendors to be linked via the OPC interface.
Communication via RFC1006 or Send/Receive is also
supported.
SQL databases are available as data destinations for
production data acquisition. Data can be transferred from the
data source on an event-driven basis with the OPC module or
sent directly from the PLC with the Send/Receive module.
Cyclic data archiving can be implemented via the OPC Data
Access, WinAC ODK or Send/Receive data sources and the
SQL database data destinations. On the database side,
various transmission mechanisms are supported. Individual
control during the runtime for every Industrial Databridge
connection (Start, Stop, Connect and Disconnect).
IndustrialDataBridge establishes a link between the source
Integration of the IndustrialDatabridge runtime control into
and destination interfaces and transfers data on the basis of a
WinCC screens when installing the IDB on a WinCC station.
change in value, once a configurable period of time has
elapsed or when a specific event occurs. Independent CSV files are created on reaching a program-
mable number of entries or if the value of a WinCC tag
IndustrialDataBridge exchanges data between automation
changes.
systems from different vendors, e.g., via OPC. The connection
of OPC servers via IndustrialDataBridge enables communi- Block transfer for databases through the support of the
cation between a variety of devices, data sources and data operators "<" and ">" in the Select instruction.
destinations. The OPC international interface standard is the Available providers (data sources) can be connected to any
key to open systems both now and in the future. Thanks to consumers (data targets) (see Table below)
IndustrialDataBridge, OPC data exchange can already be
supported.
WinCC supports access to tags, tag logging, alarm logging
and user archive data.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/IndustrialDataBridge
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/Open Development Kit (ODK)
Overview Function
WinCC/ODK (Open Development Kit) The API functions are configuration and runtime functions, and
WinCC option for utilization of the exposed programming inter- include:
faces that can be used to access data and functions of the MSRTCreateMsg: Creates a message
WinCC configuration and WinCC runtime system DMGetValue: Gets the value of a variable
The interfaces are designed as "C-Application Programming PDLRTSetProp: Sets the object properties in a display
Interface" (C-API)
They can be used in the following places:
Scope of delivery: CD-ROM with documentation and
examples within WinCC, for example in global scripts or as part of C
actions in the Graphics Designer,
Benefits in Windows applications in the programming language C
(the current version of Microsoft Visual C++ is necessary as a
Individual system expansions via an open standard development environment for WinCC).
programming language
Access to data and functions of the WinCC configuration and
runtime system
Ordering data Article No.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/PerformanceMonitor
Overview
LAN
WinCC server
WinCC SCADA server
SCADA server
+ PerformanceMonitor
(17 max.)
3
PROFINET
PROFIBUS
S7-400 S7-1500 S7-300
G_ST80_XX_00602
WinCC/PerformanceMonitor
Analysis and optimization of production on the basis of
individual performance indicators
The WinCC/PerformanceMonitor facilitates flexible calculation Analysis of the indicators and their operands can be carried out
and powerful analysis of plant-specific key performance indica- in the WinCC system at any time. Indicators, along with their
tors (KPIs). The indicators provide the basis for deriving optimi- associated values if required, can be clearly displayed in bar
zation potential, thus enabling productivity enhancement. graphs, allowing easy comparison. In addition, the input values
of each performance indicator can be shown via an integrated
They relate to individual machine groups, plant sections or analysis function (drill-down). The Gantt chart illustrates the
production lines. The elements to be monitored are designated chronological sequence of the operands. The table display lists
as equipment. Indicators are calculated based on operands the archived values, allowing subsequent correction if required.
which are derived from already configured WinCC tags. By com- Performance indicators calculated online, either cyclically or
bining them with associated values, more accurate production triggered by a tag, can be written to WinCC tags for further
correlations can be highlighted, such as quality/supplier depen- processing, and display in WinCC images, for example.
dencies. The calculation formulas used are quick and simple to
create in WinCC.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/PerformanceMonitor
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/PerformanceMonitor
All user groups benefit from the PerformanceMonitor, from the WinCC/PerformanceMonitor
application engineer to management-level evaluators. The engi-
WinCC/PerformanceMonitor
neer can use the application environment integrated in WinCC to
WinCC/PerformanceMonitor V7.4 6AV6372-2DG07-4AA0
derive individual formulas for calculating performance indica- for WinCC V7.4
tors. WinCC/PerformanceMonitor V7.3 6AV6372-2DG07-3AA0
Management uses Web-based reporting without the need for for WinCC V7.3
installation on standard computers. For maintenance, the web as download
client of the WebNavigator can be used for analysis with the WinCC/PerformanceMonitor V7.4 6AV6372-2HG07-4AA0
bar (for performance), progression (Gantt) and table controls. for WinCC V7.4
Performance indicators can be displayed on local user inter- WinCC/PerformanceMonitor V7.3 6AV6372-2HG07-3AA0
faces using standard WinCC resources to keep machine for WinCC V7.3
operators up to date. Performance indicators in the on-site Option for
WinCC system keep machine operators up to date. The service WinCC/PerformanceMonitor
engineer can analyze the plant from his/her workstation using V7.3 and V7.4
the WinCC Client, the Webclient of the WinCC/WebNavigator, Basic package
for example. At the management level, it is possible to access
3
including 30 PerformanceMonitor
Web-based reports without the need for installation on standard Archive Tags
computers. 30 additive PerformanceMonitor 6AV6372-2CG20-0BA0
Archive Tags
Structuring of the production plant in equipment units 300 additive PerformanceMonitor 6AV6372-2CG20-0DA0
Archive Tags
constituting central elements for evaluation
1 000 additive 6AV6372-2CG20-0EA0
Use of structured tags in order to facilitate implementation of PerformanceMonitor Archive Tags
machine status models as download
WinCC tags are compressed to an operand using formulas 30 additive PerformanceMonitor 6AV6372-2JG20-0BA0
Archive Tags
Calculated operands are stored in the archive
100 additive PerformanceMonitor 6AV6372-2JG20-0CA0
Archived operands are used as input values for calculating Archive Tags
performance indicators 300 additive PerformanceMonitor 6AV6372-2JG20-0DA0
Archive Tags
Bar graphs for analyzing performance indicators and root
1 000 additive 6AV6372-2JG20-0EA0
cause determination (drill down) PerformanceMonitor Archive Tags
Indicator input values (operands) can be displayed if
required. WinCC/PerformanceMonitor
Upgrade
Tabular presentation of all operands (input values)
V7.x to V7.4
Progression diagrams (Gantt charts) of time-based operands Standard software 6AV6372-2DG07-4AX3
Cyclic or event-triggered calculation results are written to as download 6AV6372-2KG07-4AX3
WinCC tags Upgrade
WinCC Runtime, alarm logging and trend logging can utilize WinCC/DowntimeMonitor
cyclically-calculated values 7.2 and 7.3 to
WinCC/PerformanceMonitor
Database information and evaluations can be displayed at Standard software 6AV6372-2DG87-3AA0
every WinCC station as download 6AV6372-2KG87-3AA0
Information server reports can be displayed on independent
PC workstations
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/Redundancy
Overview Function
Normally, two WinCC stations or process data servers run in par-
allel. Each station has its own process connection and its own
data archives. WinCC/Redundancy ensures automatic matching
WinCC of system and user archive data.
Clients
If one of the two server computers or WinCC stations fails, the
second will take over the archiving of messages and process
data, thereby ensuring seamless data integrity. In client/server
mode, the clients are automatically switched from the failed
server to the redundant partner. This ensures continuous plant
LAN visualization and operation on every operator station.
WinCC
Servers
When the failed partner resumes operation, all process values,
messages and data archived during the fail period are automat-
ically matched with the partner. This process runs in the back-
PROFINET ground and does not affect plant continuity. Once this is com-
plete, two equivalent servers/stations will be available again.
3
PROFIBUS
Communication with the SIMATIC S7 PLC can also be config-
ured with redundancy (an H Series SIMATIC S7 is required) by
G_ST80_XX_00084
plugging in two communication modules and configuring two
communication paths (S7-REDCONNECT software package).
The use of failsafe H Series SIMATIC S7 PLCs can, if required,
further increase availability at control level.
Option for SIMATIC WinCC, supporting the parallel operation SIMATIC WinCC//Redundancy
of two interfaced WinCC single-user systems or process data Option for SIMATIC WinCC V7.4, 6AV6371-1CF07-4AX0
Runtime software, single license
servers for mutual monitoring for 2 installations
If one of the two server PCs or one of the two WinCC stations Option for SIMATIC WinCC V7.3, 6AV6371-1CF07-3AX0
fails, the second one will take over control of the entire system. Runtime software, single license
Once the failed server or station is restored to operation, the for 2 installations
content of all the message and process value archives are as download
copied to it. Option for SIMATIC WinCC V7.4, 6AV6371-1HF07-4AX0
Runtime software, single license
One WinCC/Redundancy package is required for each for 2 installations
redundant pair of servers. Option for SIMATIC WinCC V7.3, 6AV6371-1HF07-3AX0
Runtime software, single license
Benefits for 2 installations
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/SES (Sequence Execution System)
3 Basic package
Extension 5 units
6AV6372-2HJ07-4AA0
6AV6372-2JJ07-4BA0
V7.3
WinCC/SES 7.3 Basic Package 6AV6372-2DJ07-3AA0
For configuration of the Sequence
The WinCC/SES (Sequence Execution System) is designed for Execution System incl. 2 units 1)
the sequential control of recipe and sequence-based processes Extension 5 units 6AV6372-2BJ07-3BA0
in production. WinCC/SES is especially suitable for production For increasing the number of
plants in which dosing, mixing and material transport are import- units 1)
ant process actions. as download
Sequence controls can be structured with a high degree of Basic package 6AV6372-2HJ07-3AA0
flexibility, with the production steps being defined in a clear Extension 5 units 6AV6372-2JJ07-3BA0
engineering interface and freely combined to form individual Upgrades
process sequences. In addition both the step sequences and Basic Package Upgrade 7.4 6AV6372-2DJ17-4AA0
the parameters can be modified online during production runs. Extension 5 units Upgrade 7.4 6AV6372-2BJ17-4BA0
WinCC/SES helps the user to fine tune their production pro- as download
cesses by allowing them to easily combine automatic se- Basic Package Upgrade 7.4 6AV6372-2HJ17-4AA0
quences with manual interventions. This means that operators Extension 5 units Upgrade 7.4 6AV6372-2JJ17-4BA0
can react quickly and intervene in the running process, for ex- 1)
also requires the WinCC/User Archives option, STEP 7 V5.5 including CFC
ample when quality of the raw materials fluctuates or if a different V8 SP1. Based on SIMATIC S7-300 S7-315 or higher. Redundancy,
sequence among the production steps becomes necessary to WebNavigator, S7-1200/1500 are not supported.
facilitate more versatile production paths. 2)
additionally requires STEP7 V5.5. Based on SIMATIC S7-300 from S7-315
WinCC/SES also offers a high level of system availability and or higher, redundancy and WebNavigator are not supported.
rapid response times since the program sequence takes place
directly on the automation controller instead of on the PC.
WinCC/SES complies with the requirements of the
ISA-88 standard.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/Server
Overview
LAN
WinCC server
(max. 18)
3
PROFINET
PROFIBUS
G_ST80_XX_00601
S7-300
S7-1500
S7-400
Option for SIMATIC WinCC, which permits the configuration of Client/server solution:
a powerful client/server system - One server can supply up to 64 connected clients with
One of the following operating systems must be available to process and archive data, messages, images and reports
install the option on the server: - Depending on the size of the plant, up to 18 servers can be
- Windows Server 2008 R2 SP1, employed.
- Windows Server 2012 R2, - 32 clients (max. 18 redundant WinCC servers) are possible
- Windows 7 SP1, per system
- Windows 8.1 or Windows 10 Requirement: Network connection (TCP/IP) between the
A maximum of 3 clients can be connected when using the server PC and the connected clients
non-server operating systems Windows 7 SP1, Windows 8.1 One license is required per server
and Windows 10.
A number of coordinated HMI stations can be operated in a
single group with networked automation systems
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/Server
Function
Each client can access more than one server at a time. Clients
can also be used for configuration on the server.
A configuration of WinCC clients as a central Web server - as a
distributed system if required - with an overview of all server
projects in the system is also possible.
For WinCC clients, only the smallest runtime license RT128 is
required. In order to also configure on WinCC clients, the small-
est complete license RC128 is required. Remote configuration is
possible if WinCC clients without their own project (Uniclients)
on the server project are configured. This makes it possible to
configure inexpensive operator and configuration stations in a
network.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/TeleControl
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/TeleControl
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/TeleControl
Integration (continued)
Outstations/remote terminal units
SIMATIC WinCC/TeleControl for WinCC V7.0 SP3 supports the S7-400/S7-400F controller (SINAUT ST7, DNP3,
following preferred outstations for local distributed automation: IEC 870-5-101/104 telecontrol protocols);
Controller integrated into ET 200S (IEC 870-5-101/104 up to 500 I/O signals or approx. 5000 data points
telecontrol protocols); for cost-sensitive applications, up to S7-400/S7-400F redundant controller (IEC 870-5-101/104 and
approx. 30 I/O signals or approx. 200 data points DNP3 telecontrol protocols); up to 500 I/O signals or approx.
S7-300/S7-300F controller (SINAUT ST7, DNP3, 5000 data points
IEC 870-5-101/104 telecontrol protocols); for extremely Third-party station with the IEC 870-5-101/104 and DNP3
flexible configuration, up to 100 I/O signals or approx. telecontrol protocols (depending on type of station)
2000 data points
The following table provides an overview of the current
options for connecting to these outstations:
Spectrum of outstations and integration versions
3
Telecontrol protocol SINAUT ST 7 DNP3 IEC 870-5-01 IEC 870-5-04
Type of communication Serial Ethernet TCP/IP Serial Ethernet TCP/IP Serial Ethernet TCP/IP
Interface TIM 4R-IE TCP/IP WAN router TCP/IP serial con- TCP/IP WAN TCP/IP serial TCP/IP WAN router
or/and TIM 4R-IE verter router converter
RTU/interface ET 200S with - - - - IM 151-7 CPU or IM 151-8 PN/DP
integr. CPU (cor- IM 151-8 PN/DP CPU
responds to S7- CPU + SIPLUS RIC
314) as well as library
1 SI module +
SIPLUS RIC library
S7-300/S7-300F TIM 3V-IE TIM 3V-IE TIM 3V-IE DNP3 TIM 3V-IE DNP3 CP 341 CP 343 + IEC on S7
+ SIPLUS RIC or integr.
library PN interface
+ SIPLUS RIC
Library
S7-400/S7-400F TIM 4R-IE TIM 4R-IE TIM 4R-IE DNP3 TIM 4R-IE DNP3 CP 441 CP 443 + SIPLUS
+ SIPLUS RIC RIC library or
library integrated
PN interface
+ SIPLUS RIC
library
S7-400H/S7- - - TIM 4R-IE DNP3 TIM 4R-IE DNP3 ET 200M + CP 443
400FH 2 x CP 341 + + SIPLUS RIC
SIPLUS RIC library library
Third-party station - - Depends on type of station Depends on type of station
Dial-up lines - - - -
Dedicated line and radio
networks
Master/slave
Peer-to-peer - -
Mesh networks
Time tagging in RTU
RTU time synchronization
Data buffering in RTU 1) 1)
Routing with SIMATIC PDM - - -
International standard - -
1)
Data buffering is limited to two SIMATIC S7 data blocks. Depending on the
SIMATIC CPU, this corresponds to approx. 800 to 3200 buffered frames.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/TeleControl
3
V7.0 + SP3"
SIMATIC WinCC/TeleControl 7.0 6DL5002-7AE07-0XA0
SIMATIC WinCC/TeleControl 7.0 6DL5002-7AA07-0XA0 SP3
SP3 for Server Runtime (256 stations)
for Server Runtime (6 stations) Software package with SIMATIC
Software package with SIMATIC WinCC/TeleControl for WinCC
WinCC/TeleControl for WinCC Runtime software, 2 languages
Runtime software, 2 languages (English, German), executable with
(English, German), executable with Windows Server 2003, single
Windows Server 2003, single license for one user; electronic
license for one user; electronic documentation on CD/DVD,
documentation on CD/DVD, 2 languages (English, German)
2 languages (English, German) Type of delivery:
Type of delivery: License key memory stick,
License key memory stick, Certificate of License incl. terms
Certificate of License incl. terms and conditions, SIMATIC WinCC
and conditions, SIMATIC WinCC Data Medium Package V7.0 + SP3
Data Medium Package V7.0 + SP3 and CD "WinCC/TeleControl Option
and CD "WinCC/TeleControl Option V7.0 + SP3"
V7.0 + SP3"
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/TeleControl
More information
For an overview of the complete performance range on the Technical Support (Hotline):
Internet, visit:
https://support.industry.siemens.com/My/ww/en/requests
Service & Support:
https://support.industry.siemens.com/cs/?lc=en-WW
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/User Archives
Overview Function
Input of parameter sets (e.g. operating parameters of a
machine) in WinCC, storage of the sets in the user archive,
and forwarding to the automation level
Continuous acquisition of production parameters by the
automation system and forwarding of the parameters to
WinCC at the end of the shift
Acquisition of batch data
Specification of production parameters
Management of warehousing data
WinCC user archives are created and assigned data in a user-
friendly way using a dedicated editor. Special ActiveX controls
are used for displaying data from the user archives at runtime.
Data sets and fields from user archives are linked to the process
via direct tag linking.
3 Import and export functions support read-in/out of data via ex-
ternal applications (e.g. MS Excel). Freely selectable filter crite-
Option for SIMATIC WinCC for managing data sets in user ria allow clear representation of data sets.
archives that contain related data.
WinCC and its automation partners (e.g. a SIMATIC S7 WinCC provides functions for free organization of the data stor-
controller) write these data sets and exchange them if age in the user archives that affect archives, data sets and fields.
required. Archives can thus be generated, opened, closed, or reset, and
data sets or field contents can be read, written or overwritten.
A license is only required for the server (or single-user
system). Sequence archives can accommodate batch data, shift produc-
tion data, or also product quality data, and meet legal obliga-
The WinCC/User Archives option can also be used tions for verification thanks to gap-free recording.
in the context of the WinCC/WebNavigator
(see also WinCC/WebNavigator option).
Ordering data Article No.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/WebNavigator
Overview
WinCC
WinCC SCADA client WinCC WinCC
SCADA clients + web server web client web client
Internet
LAN
WinCC server
(max. 18)
3
PROFINET
PROFIBUS
G_ST80_XX_00599
S7-300
S7-1500
S7-400
Option for SIMATIC WinCC for operator control and monitoring Highlights:
of plants via the Internet, in-house intranet or LAN Installation of the Web server - in distributed systems - also on
Configuration from: a WinCC Client;
- a Web server with the SIMATIC WinCC software as a single- - Access to as many as 18 subordinate WinCC stations
user, client or server version and a Web client that enables (servers) possible
operator control and monitoring of a current WinCC project - Web clients offer common views of data on various WinCC
via an Internet browser with ActiveX support. The WinCC Servers
basic system does not have to be installed on the client - If you are using WinCC/Redundancy, the Web clients will
computer. It is also possible to use the Web client without also transfer via the subordinate WinCC servers (requires
Microsoft Internet Explorer. WebNavigator server to be installed on the WinCC Client
Licensing: (RT128) )
- A license is required in order to use the Web server. The - Separating the Web functionality from the WinCC data
number of clients with simultaneous access is licensed. servers makes the overall system safer and more scalable in
- Licenses are available for access to the Web server by 1, 3, respect of load. Integrated user management with WinCC:
5, 10, 25, 50, 100 or 150 clients. The configured WinCC operator authorizations are taken into
- Low-priced WebNavigator diagnostics licenses are account on the Web client.
available for the remote diagnostics via multiple, distributed Access to WebNavigator server from the WebNavigator
Web servers. TIA Portal series of products
Access to user archives
VB scripts are supported in the same way as the new objects
and RT functions in WinCC V7.x
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/WebNavigator
Benefits
Operator control and monitoring across long distances and on
different platforms (PC, local panel, mobile PDA)
Large configurations with up to 150 operator stations
Fast updating rates thanks to event-driven communication
Optimally tailored clients for operating and monitoring,
analysis, service and diagnostics
Acceptance of configuration data for the Web, generally
without changes
Minimum maintenance costs thanks to centralized software
administration
High security standards and availability
- Increased security due to separation of WinCC server and
Web server (Web server in secure environment)
- Support for commonly used security mechanisms (routers,
firewalls, proxy servers)
- Access authorization and user administration
Printing from WinCC Controls in the WebNavigator Client and
WinCC RT Viewer. The printer is specified by the settings in the
Web Navigation interface and WinCC RT Viewer
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/WebNavigator
Design Function
Licenses for the WebNavigator The Web Configurator (Wizard) makes setting up and configur-
ing a WebNavigator Server very easy. WinCC process screens
The WebNavigator Client software can be installed as many to be visualized via the Internet are created as usual using
times as required without the need for a license. WinCC Graphics Designer. Under normal circumstances the
Server-based licensing; project can be worked on locally without modification. The Web
a license is required in order to use the WebNavigator Server. Publishing Wizard optimizes the screens for transmission and
Licenses are available for simultaneous access to the Web display on the Internet. A standard browser is all that is required
server by 1, 3, 10, 30, 100 Clients (countable licenses for V7.4) to display WinCC process screens on the Web Client. The MS In-
or 1, 3, 5, 10, 25, 50, 100, 150 Clients (for V7.3). ternet Explorer is used depending on the WebNavigator version
Diagnostics Client licensing; used (tip: start the Internet Explorer in full-screen mode with the
for optimum-cost access by one or a small number start parameter "-k").
of WebNavigator Clients to multiple Web servers The operator on the Web Client is integrated in the central
(for diagnostics, for example). This client license provides WinCC user administration and can operate and monitor the
guaranteed access to Web servers at any time. In respect of system according to the configured access rights.
function there is no difference compared with regular The WebNavigator supports all standard security mechanisms
WebNavigator Clients and the two can be mixed. that can be used for applications on the Internet, e.g. routers,
WebNavigator Clients can: firewalls and proxy servers. 3
Access a number of different web servers or New in V7.4
Access data on a number of higher-level WinCC stations WinCC/WebNavigator V7.4 allows access to process pictures
simultaneously via a remote Web server with the following Web viewers:
- Internet Explorer as of V10 (32-bit)
On the server side, only one WebNavigator Diagnostics Server - WinCC ViewerRT
license or, alternatively, one Standard WebNavigator license is
required. WinCC ViewerRT supports load balancing
Alternatively, a number of WebNavigator Servers with the same Log output on the Web client
WinCC project can be combined to create a "server farm". This Specify central Web settings for the STEP 7 multiproject.
means that it is possible for several hundred Web clients to have
access to the same database. The service ensures that the cli-
ents accessing are distributed evenly across all servers. If a
server fails the Web client is automatically forwarded to the next
available server.
In order to use this functionality you will need to install a Web
Load Balancing license on the Web servers involved. Each Load
Balance package contains 2 licenses.
An inexpensive expansion option for Web Load Balancing
is available for redundant WinCC stations on which the
WebNavigator is also installed. For this purpose, you need to in-
stall a Web Load Balancing Step Up license on the web servers
involved. Each Step Up package contains 2 licenses.
Thin Client solutions
The WebNavigator can also run under Windows Server 2003 or
Windows Server 2008 terminal services. A Windows Server 2003
or Windows Server 2008 (or higher) operating system is re-
quired. This makes it possible to connect SIMATIC Thin Clients
as visualization stations to WinCC, for example.
For this purpose, the Windows terminal services must be in-
stalled on the PC on which the Web client is installed. A Windows
Server 2003 or Windows Server 2008 (or higher) operating sys-
tem is required. Up to 25 thin clients can be connected to one
terminal server.
Applications:
Mobile devices
Handhelds
Rugged on-site visualizations
Hybrid configuration
WebNavigator and DataMonitor clients can be mixed in a single
system.
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/WebNavigator
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/WebUX
Overview
WinCC
+ WebUX server
PROFINET 3
G_ST80_XX_00603
PROFIBUS
S7-1500 S7-300
The option WinCC/WebUX permits mobile, platform and No installation on the client is required for using the WebUX.
browser-independent operator control and monitoring via the WinCC/WebUX can be used independent of the industrial
Internet or the in-house intranet or LAN. sector, for example in service for the acknowledgment of alarm
messages, in quality assurance for monitoring important pro-
WinCC/WebUX is delivered with the WinCC Basic system. duction data, or in management for obtaining a quick overview
Following installation, the WinCC basic system operates as of key production figures.
WinCC/WebUX server.
The WebUX Server itself does not require a basic license. Clients
The pictures for the WinCC/WebUX are created using the WinCC that are simultaneously logged into the server are licensed.
Graphic Designer. The WinCC picture is stored in the corre- Regarding licensing, it is differentiated between Monitor clients
sponding format in the project through the picture property (only reading) and Operate clients (reading and writing of
Web-capable. Using the service platform IIS (Internet values). WinCC/WebUX can be used immediately due to a free
Information Server), the files are provided for the Internet. Monitor client that is included in the WinCC Basic package.
Benefits
WinCC Engineering Line management and plant operator
Fast configuration with WinCC Graphics Designer Mobile operator control and monitoring using commercially
No expensive training required due to the use of WinCC available mobile devices
standard tools Uniform look and feel both on the mobile devices and on the
Can be used without complex additional configuration on the WinCC station
client Secure communication via HTTPS und SSL certificates
Maintenance, servicing and IT No entry costs since the Monitoring client is included in the
WinCC basic package
No WinCC-specific installation on the clients required
Flexible licensing due to additive, Floating Client licenses
No WinCC-specific maintenance at the data terminal
equipment required Secured plant data as a basis for decision-making
The WinCC/WebUX Server version and version of the mobile Highlights
clients do not have to be the same Can be used on HTML5-capable and SVG-capable data
Standard user authorizations on the client suffice terminal equipment without installation on the client
HMI Software
SCADA system SIMATIC WinCC V7
SIMATIC WinCC options
WinCC/WebUX
HMI Software
WinCC add-ons and partner management
Introduction
Overview
Premium Add-ons for Connectivity:
PM OPEN IMPORT system software
enables the WinCC flexible archives to be automatically read
into the WinCC system.
CC PM OPEN IMPORT system software
Win d-on
ad offers a flexible, low-cost solution for exporting current
CC CC process data and archive data from WinCC into freely struc-
Win tion Win tion turable text files.
op op
CC
Win ic SW PM OPEN TCP/IP system software
a s
b C, RT offers a low-cost solution for connecting computer systems
R
(PPS, laboratory, logistics and quality management systems,
CC etc.) to the automation and process control level.
Win d-on
ad CONNECT ALARM Historian system software
CC
Win tion permits the flexible importing of messages and alarms from
op WinCC and WinCC flexible into the SIMATIC IT Historian.
TOP Server
is a proven OPC data integration platform with a large number
3
CC of OPC device drivers.
Win d-on
ad TOP Server UCON
G_ST80_XX_00175
HMI Software
WinCC add-ons and partner management
Introduction
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
Overview Benefits
SIMATIC WinCC Open Architecture is a SCADA system for visu- Efficient engineering and flexible plant expansion
alizing and operating processes, production flows, machines - Object orientation
and plants in all industrial sectors. - Unlimited number of data points
- Mass engineering
SIMATIC WinCC OA is built consistently on object-oriented - Multilingual with UTF-8 support
structures. Due to this consistent and well-considered use of ob-
ject-oriented structures, from process images to the database, Object-oriented data model
the engineering costs improve for SIMATIC WinCC OA custom- - Mapping of setpoint values and measured values for a
ers. physical plant object onto a structured data point
- Data point comprises a tree structure with data point
Distributed systems enable the connection of up to 2 048 auton- elements
omous SIMATIC WinCC Open Architecture systems via a single - The individual process values are mapped onto the data
network. Each subsystem can be configured either as single- point elements
user or multi-user system, each of which may be redundant or - Any number of data points can be instanced from one
non-redundant. defined data point structure (data point type), e.g. 20 pumps
of the same type.
Current version: SIMATIC WinCC Open Architecture V3.14 - Data point types can be embedded in other data point types,
3
Runs under: which enables more complex plant objects to be generated
Windows 10 (64-bit) (e.g. one pump station comprises 2 pumps).
Windows 8.1 Enterprise/Professional (64-bit) - Graphical plant symbols can be linked with a data point
type. They only need to be drawn once, but can be used for
Windows 7 Ultimate/Enterprise/Professional SP1 (64-bit) all instances of the linked type.
Windows 7 Ultimate SP1 (64-bit) (released for IPC 227E / 277E - Savings in engineering outlay.
only) Freely scalable
Windows Server 2012 R2 (64-bit) - From a small single-user system up to a networked,
Windows Server 2008 R2 (64-bit) redundant high-end system
- Distributed systems of up to 2 048 servers
Red Hat Enterprise Linux 7.1 (64-bit)
Platform-independent
OpenSUSE 13.2 (64-bit) - Available for Windows, Linux, iOS and Android
CentOS 7.1 (64-bit) Native 64-bit support
VMWare ESXi Version 6 - More system memory is usable, due to native 64-bit support
Note: - This means that larger data quantity structures per server
can be processed
Native 64-bit support. Maximum fail-safety and availability
- Hot standby redundancy
- Disaster recovery system
- SIL3 certification according to IEC 61508
Platform for customized solutions
- Quick and easy implementation of new processes
- Swift adaptation of the control and visualization of the plant
to current market requirements
- Company-internal programming and in-house develop-
ments enable independence and protection of intellectual
property
- Structure of standardized solutions permits continuous use
- Support of brand-labeling
- Individual brand names for OEM developments
Openness thanks to comprehensive driver and interface
options:
- SIMATIC S7 TCP/IP, Modbus TCP/IP, Ethernet/IP,
SNMP, BACnet, OPC DA Client & Server,
OPC A&E Client & Server, OPC UA Client & Server (DA, AC),
SSI driver, IEC 60870-5-101, -104, DNP3, SINAUT, IEC
61850/61400, RK512, TLS, Teleperm M, API, Cerberus
Seamless traceability of system states by means of
high-performance archiving:
- Data archiving in value archives (internal database format)
- Data archiving in an Oracle database
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
Design (continued)
WinCC OA Manager Task
Data Manager (DB) The Data Manager (DB) represents the link to data- Visualization, Operation
UI UI UI
base. On one hand, it involves the parameterization User- User- User- UI = Runtime
data of an application that is to be stored in such a interface interface interface GEDI = Graphical Editor
database. On the other hand, it involves the histori- Editor Runtime Runtime PARA = Data base Editor
cal recording of changes in values or alarms. If a
user wishes to query historical data at a later date,
then the Data Manager completes this request and
not the database itself. Processing, Control
CTRL API
Control Manager WinCC OA has numerous options for implementing Control API Control = Script language
manager manager Manager
(CTRL) your own algorithms and processing. The two most API = Application
important are the internal language control (CTRL) Programming
and the general application programming interface Interface
(API).
Control is an extremely powerful scripting language.
Process Image, History
The processing is interpretative, so that no compila- DB EV CON
tion is required. The syntax is almost identical with Database Event Connect. Event manager = Communication
ANSI-C, with some modifications for simplification. Manager manager to other and Alarming
This is a fully developed, procedural high-level lan-
guage with multi-threading (= quasi-parallel pro-
cessing of individual programs; the system itself
systems Data manager, = History
RDB
3
carries out the processing check). The language
G_ST80_XX_00463
offers a comprehensive function library for tasks of Process interface
the control and visualization technology. Control can D D D
Driver Driver Driver Driver: PLC, field busses, DDC,
be used as a stand-alone process (Control Man- Telemetry/RTU, special drivers
ager), for animation and user interface design or for
standardized, data object-oriented processing
functions.
The API (WinCC OA API) represents the most
powerful form of functional expansion. It is config- A WinCC OA System consists of function-specific units, the managers
ured as a C++ class library and allows the software
developer to implement individual functions as an
independent, additional manager (forecast system, For special tasks such as redundancy, management for
simulation, tools, proprietary databases, etc. ). distributed systems, web server, reporting, simulation, COM
User Interface The interface to the user is created by the User etc., further managers are available.
Manager (UI) Interface Manager (UI). This comprises a graphics
editor (GEDI), a database editor (PARA) or the
The powerful configuration functions contribute to a reduction of
general user interface of the application (Vision engineering and training overheads and lead to increased
module). The User Interface serves to display flexibility and operational reliability.
values, issue commands or track alarms in the
alarm list. Trends and reports are also usually part
of the UI. From a programming viewpoint, the user
interaction in WinCC OA is completely isolated from
the background processing this is merely a view
of the data of the current process image or the
history.
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
Design (continued)
Special functions Task Special functions Task
Access to external The database interfaces offer the possibility of SMS Allows the sending and receiving of text messages
databases access to external databases. with WinCC OA.
Under Windows, the link is established via the ADO
Standard. ADO (ActiveX Data Objects) is an inter- Encryption of panels Allows your panels or scripts to be encrypted,
face developed by Microsoft for vendor-indepen- and CTRL scripts/ thereby protecting your knowledge and work.
dent access to data sources of all types, primarily libraries
databases. The data source for ADO is an OLE DB Script Wizard Easy-to-use tool that simplifies the creation of
Provider, although ODBC-compatible databases animated, graphical plant symbols, which saves
can also be addressed via an internal wrapper. time during engineering.
In Linux, the Qt library is used as an interface to
relational databases. Access in this case is either Simple Symbols Basic package of plant symbols that have been
direct via the native DB-API or via ODBC. created using the script wizard. These can be
adapted quickly and easily to the specific require-
Application The API offers a series of functions that enable ments of the customer.
Programming WinCC OA to be extended with special managers.
Interface (API) A manager means a program that communicates Easy Faceplates Simple parameter assignment of predefined pop-up
with the system by via a protocol defined by windows that display details of the associated plant
WinCC OA. symbol. Without any additional drawing outlay,
3 COM (Component
Object Model)
This is a specification for the development of
modular software components that can be used by
several standard functions per object can be
activated for the detail view (alarm display, trend
display, measured value table, setpoint value table,
each COM-compatible application. COM compo- address table, notes).
nents can easily be integrated into such applica-
tions and can even be removed from an application Drag and Draw Several representative graphical objects can be
during runtime. COM components can be pro- defined and configured for each plant object in the
grammed in a host of different languages, even data model (data point type). These are pre-config-
though C++ is usually used for this purpose. The ured and need only be moved to the panel via
specifications OLE, ActiveX and DirectX are based drag-and-drop when the plant pictures are drawn.
on the COM technology. This saves valuable time during engineering.
Control expansion Expansion that allows C++ functions to be added to Distributed systems Permits the coupling of two or more autonomous
the programming language. (see the diagram WinCC OA systems via a network. Each subsystem
below) of a distributed system can be configured either as
Panel topology/ Generation of panel hierarchies/topologies in a single-user or multi-user system, each of which
summation signal existing or new projects and automatic creation of may be redundant or non-redundant. A sub-system
summation signals of the alarm data points that are in this context means a server on which an Event
located in the panels of the topology. Manager is running, whereby in case of redundancy
Redundancy The failure safety in a redundant system is imple- both redundantly operating servers are considered
(see figure below) mented by means of hot standby. Hot standby is a as one system.
hardware-independent solution for high availability.
This is a safety concept that consists of two inter-
connected server systems. Both servers are con-
stantly in operation and are subject to the same
functional loading (but only one server is ever
active; the second compares the data with the pri-
mary unit at runtime). On the failure of one unit, an
"on-the-fly changeover" takes place and the previ-
ously passive server assumes the leading role. This
guarantees access to data or functions at all times.
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
Design (continued)
Operator station 1 Operator station 2
UI UI
User- User-
interface interface
RuntimeE Runtime
Server 1 Server 2
Message direction
CTRL
Control
CTRL
Control
3
manager manager
EV
Event
manager Event DB
DB REDU REDU
Database Redundancy Redundancy manager Database
manager manager manager manager
G_ST80_XX_00479
D D
Driver Driver
The diagram shows a detailed representation of the two In the case of redundant operation, the UIs of both operator
computers Server 1 and Server 2. Server 1 is in the management stations are connected to both Event Managers, however only
mode (active) and Server 2 is in hot standby mode (passive). the data of the active system is displayed on both UIs. The Event
Manager of the passive system is restricted exclusively to
communication with the Event Manager of the active system for
comparison of the process data (it sends no data to the
connected UIs or it discards messages from the drivers this
can be seen in the figure with the switches on the UIs or on the
passive Event Manager).
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
Integration
Integration in automation solutions Protocol Description
SIMATIC WinCC Open Architecture is an open SCADA system S-bus The WinCC OA S-bus driver is used to link SAIA
with comprehensive drivers and flexible options for connection PCD control devices to WinCC OA projects. Client
to other external systems. mode of the SAIA S-Bus driver is used. Communi-
cation is carried out using the UDP; the serial
Depending on the communications protocol and the bus version of the protocol is not supported.
physics used, specific drivers are used in each case: Serial: RK512/3964R Is used for interfacing a PLC via the 3964R/RK512
Serial protocols: RK512, 3964R, etc. protocol
Ethernet: Industrial Ethernet (S7), Modbus TCP Cerberus Cerberus is a fire, intrusion and gas alarm system.
The Cerberus driver guarantees communication
(OpenModbus), Ethernet IP (AB), etc. to and from the central fire alarm systems and
Telecontrol systems: SINAUT, SSI (Ethernet), building security facilities in the event a fire, gas
IEC 61850/61400, IEC 60870-5-101, IEC 60870-5-104, etc. or intruder alarm.
Vendor-independent interfaces: OPC UA, etc. SSI Is used for the interfacing of SAT remote control
systems. The data is exchanged via the LAN
In SIMATIC WinCC Open Architecture, several drivers can be (Ethernet, IEEE 802.3); the frame formats used are
3 operated in parallel. These can be of the same type or also of the SSI formats defined by SAT. The SK 1703 tele-
control components with a suitable communica-
different types. It is possible in a SIMATIC WinCC Open tion card (KE/ET) are supported.
Architecture system, for example, to establish connections via
the S7 protocol to a SIMATIC controller, via IEC 60870-5-104 to IEC 60870-5-101, -104 IEC drivers are standardized telecontrol drivers
that can process proprietary frames. IEC stands
a telecontrol system, and via OPC DA to any OPC server at the for International Electrotechnical Commission, the
same time. international standardization committee for
electrical engineering.
Coupling overview IEC 60870-5-104 for data exchange via TCP/IP
IEC 60870-5-101 for serial connection
Protocol Description
IEC 61850/61400 IEC 61850 Client and IEC 61400 Client defines an
S7 TCP/IP TCP/IP driver for Siemens Industrial Ethernet architecture for satisfying the requirements of
electrical substation automation. It defines a data
OPC Client Compatibility with specifications DA 1.0 and model and the communication services for inter-
(Data Access) 2.05a action with and between the elements of a substa-
Connection to inproc, local or remote server tion, such as power supply units, circuit-breakers,
Connection with up to 20 servers at the same protective devices etc. A description language
time and a system configuration language (SCL) have
Monitoring of the connection to the server and been defined for technical purposes.
automatic reconnection if the connection is
interrupted. DNP3 The DNP3 (Distributed Network Protocol 3) driver
Address browsing if supported by the server. is an open, rugged and modern protocol which
Benefits of the CALL-R functionality for CALL-R exhibits characteristics and strengths similar to
servers (simplified parameter assignment) the IEC driver. The transfer of any number of
frames with different data types takes place
OPC Server Corresponds to Data Access 2.05a specification between the WinCC OA System (Master) and the
(Data Access) (reading/writing of online values). remote stations (Slave).
Is to be started as a manager just like other
drivers. SINAUT SINAUT (SIemens Network AUTomation) is a
The provided DPEs (server -> client) can be eas- communication protocol for automated monitoring
ily and quickly defined via data point groups. and control of remote process stations on the
DPEs can be declared as readable (read-only basis of SIMATIC S7. Communication takes place
access is permitted; Group OPCRead) or as writ- via TCP/IP.
able items (Group OPCWrite).
Clients can browse the WinCC OA OPC Server SNMP Manager & Agent SNMP (Simple Network Management Protocol) is
hierarchically. a protocol for monitoring network elements
(servers, workstations, routers, switches, hubs,
OPC Alarms & Events OPC Alarms & Events (abbreviated to OPC A&E) etc.) and their functions.
is, in addition to Data Access, a further standard SNMP Manager supports SNMP V1, V2, and V3
for performing central alarm management on a SNMP Agent supports SNMP V1 and V2
cross-vendor basis. OPC A&E is used to ensure
the link to other control systems and the display of BACnet over IP driver BACnet (Building Automation and Control Net-
alarms/events in a hierarchical system. works) is a standardized protocol for building
automation and has been set by the ASHRAE
OPC Historical Data OPC Historical Data Access (OPC HDA) is used (American Society of Heating, Refrigerating and
Access to exchange archived process data. This is in Air-conditioning Engineers) as a guideline to pro-
contrast to the OPC Data Access (OPC DA) vide a uniform and cross-company standard for
specification that deals with real-time data. data communication within and between building
automation systems.
OPC UA The OPC UA client supports the OPC UA stan-
(Unified Architecture) dards Data Access and Alarms & Conditions (AC) The BACnet Standard 2004 is supported in accor-
and Historical Access (HA). dance with the PIC list (see product documenta-
tion)
Modbus TCP Modbus/TCP is based on the serial Modbus
protocol, which was adapted for TCP/IP. The Further drivers on request or via C++ API
Modbus/TCP driver can be used simultaneously
for Modbus/TCP or UNICOS.
Ethernet/IP Ethernet/IP is used for communication with
several PLC generations and families from
Rockwell Automation / Allen Bradley. The protocol
is part of the application layer and is based on the
standard TCP/IP network protocol.
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
Technical specifications
Type SIMATIC WinCC Open Architecture V3.14 Type SIMATIC WinCC Open Architecture
Operating system Windows 10 (64-bit) Functionality/quantity
Windows 8.1 Enterprise/Professional (64-bit) structure
Windows 7 Ultimate/Enterprise/Professional Number of messages 150,000 2)
with SP1 (64-bit) Message text System-limited 1)
Windows 7 Ultimate SP1 (64-bit) (number of characters)
(released for IPC 227E / 277E only)
Message archive System-limited 1)
Windows Server 2012 R2 (64-bit)
Process values per 1 process value + up to 32 alarm associated
Windows Server 2008 R2 (64-bit)
message values per message
Red Hat Enterprise Linux 7.1 (64-bit)
Constant load of 500/s 2)
OpenSUSE 31.2 (64-bit) messages, max.
CentOS 7.1 (64-bit)
Message burst, max. 15,000/10 s every 5 min 2)
VMWare ESXi Version 6
Archives
PC hardware requirements 1)
3
Archive data points Max. 250,000 per server 2)
Processor type Intel Pentium or equivalent
Archive types < 20 parallel logs, different retention period for
Minimum Intel Pentium IV 1.6 GHz (or better)2)3) each log
Recommended Client: Intel Pentium IV/Core2/i3, 2 GHz2)3) Data storage format Oracle or file system
Server: Intel Core i3 CPU Dual, 3 GHz2)
Server large system4): Intel(R) Core(TM) i5/i7 Measured values per Server/single-user station: 7,000/s 2) 3)
CPU Dual / Quad, 3 GHz2)3) second, max.
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
SIMATIC SIMATIC
WinCC Open Architecture WinCC Open Architecture
system software V3.14 system software V3.14
WinCC OA core components WinCC OA Server
WinCC OA Server
WinCC OA Server unlimited V3.14 6AV6351-1HP31-4AA0
Language/script versions: De, En;
with license for: License for server (without operator
station licenses), with unlimited I/O,
WinCC OA single-user station 6AV6351-1HA31-4AA0 alerting, extended trend, historical
500 I/O V3.14 recording, S7 driver,
License for single operator station SSL encryption, OPC client,
with up to 500 I/O (bit, integer), OPC server, OPC UA client,
alerting, extended trend, WinCC OA Web server and one
historical recording, S7 driver, WinCC OA OPERATOR 1 Device
SSL encryption, OPC client, License
OPC server, OPC UA client, WinCC OA dongle V3.14 6AV6351-1AH31-4AA0
WinCC OA Web server and one
WinCC OA OPERATOR 1 Device Hardware dongle for USB port for
3
License. Cannot be expanded with operation with a hardware-indepen-
multiple operator stations or dent license attached to the dongle,
add-ons. which can also extend the
hardware-linked license of the
WinCC OA Server I/O V3.14 operator station or server on a
License for server (without operator temporary basis.
station licenses), alerting, WinCC OA on data medium 6AV6351-1AX31-4AA0
extended trend, historical
recording, S7 driver, WinCC OA Software DVD current
SSL encryption, OPC client, version on disk
OPC server, OPC UA client, WinCC OA for Nanobox 128 I/O 6AV6351-1KA31-4AA0
WinCC OA Web server and one
Runtime License for SIMATIC
WinCC OA OPERATOR 1 Device
Nanobox (Win 7 Ultimate SP1
License 64-bit) with max. 128 I/O, including
WinCC OA Server 1,000 I/O 6AV6351-1HB31-4AA0 one operator station, distributed
V3.14 With a max. of 1,000 I/O systems option, S7 driver,
of any type SSL encryption, OPC client,
WinCC OA Server 3,000 I/O 6AV6351-1HC31-4AA0 OPC server, OPC UA client,
V3.14 With a max. of 3,000 I/O RDB option, WinCC OA Web server
of any type as well as a choice of one other
WinCC OA Server 5,000 I/O 6AV6351-1HD31-4AA0 driver. This package cannot be
V3.14 With a max. of 5,000 I/O expanded with other WinCC OA
of any type options. The use of this license is
WinCC OA Server 10,000 I/O 6AV6351-1HE31-4AA0 exclusively restricted to the
V3.14 With a max. of 10,000 I/O approved Nanoboxes (restrictions
of any type on the hardware side can be
viewed in the online help).
WinCC OA Server 15,000 I/O 6AV6351-1HF31-4AA0
V3.14 With a max. of 15,000 I/O WinCC OA for Nanobox 512 I/O 6AV6351-1KB31-4AA0
of any type Runtime License for SIMATIC
WinCC OA Server 25,000 I/O 6AV6351-1HG31-4AA0 Nanobox (Win 7 Ultimate SP1
V3.14 With a max. of 25,000 I/O 64-bit) with max. 512 I/O, including
of any type 1 user interface, one operator
WinCC OA Server 50,000 I/O 6AV6351-1HH31-4AA0 station, distributed systems option,
V3.14 With a max. of 50,000 I/O S7 driver, SSL encryption,
of any type OPC client, OPC server,
WinCC OA Server 75,000 I/O 6AV6351-1HJ31-4AA0 OPC UA client, RDB option,
V3.14 With a max. of 75,000 I/O WinCC OA Web server as well as a
of any type choice of one other driver, and
HTTP server.
WinCC OA Server 100,000 I/O 6AV6351-1HK31-4AA0 This package cannot be expanded
V3.14 With a max. of 100,000 I/O with other WinCC OA options.
of any type Further options and drivers are
WinCC OA Server 150,000 I/O 6AV6351-1HL31-4AA0 available. The use of this license is
V3.14 With a max. of 150,000 I/O exclusively restricted to the
of any type approved Nanoboxes (restrictions
WinCC OA Server 200,000 I/O 6AV6351-1HM31-4AA0 on the hardware side can be
V3.14 With a max. of 200,000 I/O viewed in the online help).
of any type
WinCC OA Server 250,000 I/O 6AV6351-1HN31-4AA0
V3.14 With a max. of 250,000 I/O
of any type
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
3
available. The use of this license is number of simultaneously active
exclusively restricted to the clients is counted.
approved Nanoboxes (restrictions
on the hardware side can be WinCC OA 25 Client V3.14 6AV6351-1CR31-4AA0
viewed in the online help). 25 operator station licenses with all
WinCC OA for Nanobox 4 096 I/O 6AV6351-1KE31-4AA0 server operator station functional-
ities. Client licenses can be
Runtime License for SIMATIC installed on multiple PCs - only the
Nanobox (Win 7 Ultimate SP1 number of simultaneously active
64-bit) with max. 4 096 I/O, clients is counted.
including one operator station,
distributed systems option, S7 WinCC OA 50 Client V3.14 6AV6351-1CS31-4AA0
driver, SSL encryption, OPC client, 50 operator station licenses with all
OPC server, OPC UA client, server operator station functional-
RDB option, WinCC OA Web server ities. Client licenses can be
as well as a choice of one other installed on multiple PCs - only the
driver. This package cannot be number of simultaneously active
expanded with other WinCC OA clients is counted.
options. The use of this license is
exclusively restricted to the WinCC OA 100 Client V3.14 6AV6351-1CT31-4AA0
approved Nanoboxes. (Hardware 100 operator station licenses with
restrictions can be found in the all server operator station function-
online help.) alities. Client licenses can be
installed on multiple PCs - only the
number of simultaneously active
clients is counted.
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
3
Client for iOS or Android
development license for server,
WinCC OA 10 Mobile Client 6AV6351-1JR31-4AA0 graphic editor with symbol catalog,
License for 10 WinCC OA Mobile user-friendly script development
Clients for iOS or Android language, alerting, extended trend,
and historical recording. Requires
WinCC OA 25 Mobile Client 6AV6351-1JS31-4AA0 corresponding server license.
License for 25 WinCC OA Mobile
Clients for iOS or Android WinCC OA Para Remote V3.14 6AV6351-1EQ31-4AA0
Client, parameterization and
WinCC OA 50 Mobile Client 6AV6351-1JT31-4AA0 development license for remote
License for 50 WinCC OA Mobile access to server including graphic
Clients for iOS or Android editor with symbol catalog, user-
friendly script development
WinCC OA 100 Mobile Client 6AV6351-1JU31-4AA0 language, alerting, extended trend,
License for 100 WinCC OA Mobile and historical recording.
Clients for iOS or Android
WinCC OA API interface gen. 6AV6351-1EK31-4AA0
WinCC OA OPERATOR V3.14
mobile app Application programming interface
Permits operation and visualization for the integration of customer-
of a WinCC OA installation via specific managers or drivers. One
iPhone and iPad. Over a secured license is required for each
SSL connection, measured values development workstation. We
and alarms can be retrieved, as strongly recommend the participa-
well as commands and acknowl- tion in a Certified WinCC OA
edgements sent. Navigation takes Developer Workshop when ordering
place in list form or map-supported. this product for the first time.
The configuration is carried out in
an intuitive wizard. Each device WinCC OA Custom Driver V3.14 6AV6351-1EL31-4AA0
must be assigned its own, fixed Extends a WinCC OA server license
license. with the option of communication
with a customer-specific driver. One
WinCC OA OPERATOR 1 device 6AV6352-1DK31-4AA0 license is required for each
License for 1 device customer-specific driver.
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture V3.14
More information
Further information can be found in the Internet at:
http://www.siemens.com/wincc-open-architecture
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture Add-ons
Overview
SIMATIC WinCC Open Architecture is a SCADA system for Current version: SIMATIC WinCC Open Architecture V3.14
visualizing and operating processes, production flows, runs under:
machines and plants in all industrial sectors. Windows 10 (64-bit)/Windows 8.1 Enterprise/Professional
SIMATIC WinCC OA is built consistently on object-oriented (64-bit)
structures. Due to this consistent and well-considered use of Windows 7 Ultimate/Enterprise/Professional SP1 (64-bit)
object-oriented structures, from process images to the data- Windows Embedded Standard 7 (64-bit)
base, the engineering costs improve for SIMATIC WinCC OA (released for IPC 227E / 277E only)
customers.
Windows Server 2012 R2 (64-bit)
Distributed systems enable the connection of up to
2 048 autonomous SIMATIC WinCC Open Architecture systems Windows Server 2008 R2 (64-bit)
via a single network. Each subsystem can be configured either Red Hat Enterprise Linux 7.1 (64-bit)
as single-user or multi-user system, each of which may be OpenSUSE 13.2 (64-bit)
redundant or non-redundant.
CentOS 7.1 (64-bit)
VMWare ESXi Version 6
3 Note:
Native 64-bit support.
Function
SIMATIC WinCC Open Architecture add-ons
The universal WinCC Open Architecture basic software is the
basis for modular expansions. These functional expansions are
available in the form of WinCC Open Architecture add-ons.
WinCC OA
server (multi-user system)
OPC UA (TCP)
WinCC OA
server
(stand-alone
system)
WinCC OA
System communication TCP
system 1
operator station
S7 Industrial Ethernet (TCP)
WinCC OA
server (redundant)
operator station
G_ST80_XX_00480
operator station
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture Add-ons
Function (continued)
Add-ons Task Add-ons Task
BACnet BACnet provides an integrated BACnet-compliant Communication Stands for modern alarm management/remote
online/offline engineering solution for building Center alerting and communication using the latest
automation technology, including object library. standards and various media. The Communication
Designed for heating, ventilation and Center creates synergies by using the various inter-
air-conditioning, lighting control and safety systems. faces for remote alerting via the control system.
Text message and email media are covered with the
S7 AdvancedLib The S7 AdvancedLib (AdvS7) is an industry-inde- Communication Center.
object library pendent object library that permits the use and
visualization of objects from the process control VIDEO Enables the integration of a video management
system (e.g.: drives, valves, regulators, motors, (see figure below) system in WinCC OA. Through the combination of
etc.) in a project with WinCC OA and S7. In addition SCADA and video monitoring in one system, the
to the WinCC OA and AdvS7 license, the use of costs for separate video interfaces and the addi-
S7 AdvancedLib requires the use of the relevant tional expense of maintenance and operation can
library on the SIMATIC side. be saved, and the period of training for operating
personnel can also be reduced.
Maintenance package Includes the following functions: Operating hours
counter, operating cycle counter and maintenance HTTP server For displaying WinCC OA data via Intranet and
log. Web.
Scheduler Permits the creation, parameterization and
management of time programs that allow the time
Authentication via
Kerberos
A WinCC OA system can be exposed to a variety of
attacks. An unauthorized WinCC OA System could 3
and event-driven triggering of specific actions. set up a connection to the distribution manager or
hackers could try to manipulate WinCC OA
Recipes WinCC OA recipes allow setpoints or commands for messages. Secure authentication has been devel-
certain data point elements to be sent simultane- oped to prevent such attacks. The authentication
ously. Based on "recipe types", which define the based on Kerberos enables each WinCC OA com-
quantity of the assigned data point elements, ponent to verify the identity of another component.
recipes are created that send their values to the WinCC OA servers can verify the identity of the cli-
data point elements upon activation. ents and clients can verify the identity of the serv-
GIS Viewer With the help of this viewer, standardized cards of a ers. In addition, Kerberos ensures that messages
geo-information system (GIS) can be fully are not modified during their transmission (capture-
integrated in WinCC OA. Furthermore, it is possible replay attacks are prevented). Furthermore, it is also
to display all WinCC OA objects in the cards. possible to send messages in encrypted form.
Reporting Web-based reporting is implemented using the AMS (Advanced For the effective planning, administration, imple-
standardized Simple Object Access Protocol Maintenance Suite) mentation and monitoring of maintenance work and
(SOAP) reporting interface. Reporting tools from faults. The processes are evaluated by means of
third-party suppliers can thus be used with no statistics and reports are communicated.
additional effort. The BIRT templates that are also Web client From a technical standpoint, the WinCC OA Web
provided, as well as the predefined reporting data, Client is a plug-in that is downloaded via the web
further simplify the reporting. browser (which is used on the client computer) and
Web-capable reporting interface (SOAP): a WinCC OA UI Manager is then displayed embed-
- ECLIPSE BIRT (large number of reporting ded in the HTML page. No WinCC OA installation on
templates for ECLIPSE BIRT are also supplied) the client computer is required, except for the
- Crystal Reports required web client plug-ins.
- SIMATIC Information Server
- Microsoft Excel Ultralight Client UX A "thin client" that is suitable for plant access via a
Online values, history PC workstation and a browser. Access is possible
Support of compressed data, SQL, alarms via a standard Web browser without the need for
Diagnostic tools any additional installations.
Audit trail
WinCC OA Permits operation and visualization of a WinCC OA
Excel report Powerful report generator directly in Microsoft OPERATOR installation via iPhone and iPad. Process data, plant
Excel. Templates can be created easily and directly availability, and plant status can all be displayed.
in Excel. If a report has to be created over a defined Location filtering provides a rapid overview of all
period of time, the system accesses the template spatially distributed systems including summation
and automatically completes it with data from the alarms.
WinCC OA process database. Reports can also be
created, printed and saved on a time-controlled Disaster Recovery This system expands the simple redundancy to
basis, without any need for user access. The Excel System include a second redundant system, to which the
Report fully supports compression structures (see figure below) system can switch over in the event of a fault (e.g.
(AC - archive compression) of WinCC OA. fire or explosion in the building of the primary sys-
tem). By means of this additional local redundancy,
the highest level of system stability is obtained.
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture Add-ons
Function (continued)
Video workstation
Monitor 1
control panel
mouse
keyboard video monitor 1
joystick
3
encoder
TCP/IP Control commands
connection Cameras or
decoder crossbars
network
video recorder
G_ST80_XX_00481
WInCC OA
server
WinCC OA WinCC OA
hot-standby hot-standby
active system passive active system passive
server (A) server (B) server (A) server (B)
G_ST80_XX_00482
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture Add-ons
3
environment consisting of WinCC implementation of production
OA BACnet browser, WinCC OA management systems. The frame-
EDE-Tool + EDE file interface work offers functions for recording
(requires the WinCC OA and evaluating production and
engineering license) batch-related quality data. This item
(max. 5 000 objects per server). is not available as a product but
only in combination with consulting
WinCC OA GIS 6AV6352-1DC31-4AA0 and additional testing overhead.
GIS viewer for displaying ESRI
Shapes Files. One license is WinCC OA topology package 6AV6352-1EB31-4AA0
required for each UI. Can be used The topology package is an
in WinCC OA Client and Web Client. application framework enabling the
Maps are not included. topological coloring of network
Dynamization performed using views. A qualitative statement is
Ctrl scripting. made regarding which parts of a
network are directly connected to
WinCC OA S7 AdvancedLib 6AV6352-1DD31-4AA0 which infeed units in a connection
Runtime license for using the object established by switching elements.
library WinCC OA S7 AdvancedLib, Only available in combination with
coordinated with the SIMATIC consulting and additional testing
object library also supplied, which overhead.
is free of charge until revoked.
License required for each server. WinCC OA ACAS 6AV6352-1EC31-4AA0
The PLC section of this library is the WinCC OA Advanced Command
intellectual property of Siemens AG Authority Suite framework for
- a software sublicense contract to managing and visualizing authority
this effect must be signed and settings. The license includes the
returned before the SIMATIC Object management panel and panel
Library can be obtained. expansions for alarm, horn and
acknowledgement functions. This
WinCC OA Maintenance 6AV6352-1DE31-4AA0 item is not available as a sole
Maintenance management for product, only in combination with
recording operating hours, consulting and additional testing
switching cycles, alarm handling overhead.
and notepad function. License
required for each server. WinCC OA APM 6AV6352-1ED31-4AA0
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture Add-ons
HMI Software
SCADA System SIMATIC WinCC Open Architecture
SIMATIC WinCC Open Architecture Add-ons
More information
Additional information is available on the Internet at:
http://www.siemens.com/wincc-open-architecture
HMI Software
SIMATIC ProAgent process diagnostics software
SIMATIC ProAgent
Overview Benefits
SIMATIC ProAgent Integral component of Totally Integrated Automation (TIA):
increases productivity, minimizes the engineering outlay,
The software options package for fast, targeted process fault reduces the lifecycle costs
diagnosis that ProAgent:
provides plant and machine personnel with optimized support - Provides optimum support for plant and machine personnel
with troubleshooting and fault rectification, in respect of troubleshooting and fault rectification
increases the plant availability, and - Increases plant availability
- Reduces downtimes
reduces downtimes.
No further configuration overhead for diagnostics functionality
Process error diagnosis software for quick and precise Frees up PLC capacity with regard to memory and program
diagnosis of faults/errors in plants and machines for execution time
SIMATIC S7 and SIMATIC HMI No special operator know-how is required thanks to clearly
Standardized diagnostics concept for various comprehensible indication of the cause of error
SIMATIC components:
optimum interaction of STEP 7 engineering tools and Application
3 SIMATIC HMI
Standardized user interface
Increased productivity is being achieved more and more by
cutting costs. In this context, the focus is increasingly on main-
tenance. The emphasis here is on rectifying faults as quickly and
efficiently as possible. Ideally, the operating personnel should
also perform part of the maintenance tasks. The operating per-
sonnel are on-site, they are familiar with the procedures and can
intervene quickly. This saves time and reduces costs. It is pre-
cisely here that ProAgent can assist operating personnel in iden-
tifying faults quickly, in particular in the automotive and machine
tool industries.
In the event of a process fault, process fault diagnosis with
SIMATIC ProAgent will provide information about the location
and cause of that fault and support personnel with trouble-
STEP 7 shooting.
The ProAgent solution has been optimized specifically for use
with SIMATIC S7-300/S7-400 and SIMATIC WinAC. It can be
used in combination with the S7-PDIAG, S7-GRAPH and
S7-HiGraph1) STEP 7 engineering tools. The ProAgent option
G_ST80_XX_00367
STEP 7
G_ST80_XX_00581
HMI Software
SIMATIC ProAgent process diagnostics software
SIMATIC ProAgent
Function
Context-sensitive diagnostics initiation due to process error Message display
message
All of the existing process messages are shown in the message
Output of operands with symbols and comment display. Context-sensitive branching to other diagnostic dis-
Switching is possible between LAD, STL and signal list plays is also possible with a selected message. The operating
Supporting fault rectification with direct process access when personnel can also take the message directly from the erroneous
using the motion display operands and react immediately without having to perform any
other operations on the HMI device. WinCC flexible permits this
Output of the faulty operands directly in the message function on the Windows CE-based devices TP/OP/MP 270/277,
including address, symbol and comment1) MP 370/377, and on PC Runtime systems. The function is
Consistency test in RT: available as of version 6.0 for WinCC/ProAgent.
Inconsistent diagnostic units are marked with icons. This
permits quick locating of faults regarding configured data in
the commissioning phase.
Direct, unit-related entry point in the diagnostic display from
user displays by using ProAgent functions
Unit or message-related entry to STEP 7 (LAD/STL/FD editor,
S7-GRAPH, HW CONFIG (upon system error messages)), 3
supported fully automatically 2)
Unit or message-related entry to STEP 7), supported fully
automatically3)
Graphic display of step sequences (overview display)4)
1)
In combination with TP/OP/MP 270/277, MP 370/377, C7 636, WinCC/
ProAgent as of V6.0, and WinCC flexible/ProAgent
2)
WinCC/ProAgent as of V5.5 and as of WinCC flexible 2007/ProAgent on PC
RT
3)
Only WinCC/ProAgent as of V5.5
4)
As of WinCC flexible 2007/ProAgent, WinCC/ProAgent as of V5.6 in combi-
nation with S7-GRAPH as of V5.1 (OCX is delivered as of S7-GRAPH 5.1)
Unit overview
Standardized user interface with standard displays The units overview displays all technological units and the
Message display respective sub-units (system/machine components) in table
form. In this display, the user is able to recognize, for example,
Unit overview which operating mode or which status the respective unit is in.
Diagnostics detail display The operating mode can be changed by the user if required.
Motion display Faulty units are marked with attributes.
Sequencer operating display
The displayed image contents are related to the previously
selected units or messages. This means that the proper. context-
sensitive diagnostics display can be called up based on a
message or a selected technological unit.
HMI Software
SIMATIC ProAgent process diagnostics software
SIMATIC ProAgent
Function (continued)
Diagnostics detail display Sequencer operating display
The diagnostic detail display shows the faulty operands at the The sequencer operating display supports sequencer control.
time of origination of a process error. As an option, current status This makes functions such as initializing and acknowledging
information can also be displayed. The diagnostics results are sequencers, activating/deactivating individual steps and
either displayed in a ladder diagram (LAD), statement list (STL), operating mode settings possible analog to the status/control in
or in a clearly arranged signal list overview. The output of the S7-GRAPH. The steps are output to a list with step number/
operands depends on the display format with symbols and com- name. Attributes for identifying an active/faulty step give the
ments from the S7 symbol table. Only the operands that cause operating personnel an overview of the current status of the step
the fault are displayed and marked with a highlighted attribute. sequence.
Switching to a display that calls up the current status of all
operands in the controller is also possible.
The motion display is used for supported fault rectification. Every WinCC flexible /ProAgent and WinCC/ProAgent1) also offer
motion line contains a comment line that describes the motion capabilities for graphic monitoring and sequencer diagnostics.
(e.g. x-axis), two actions for implementing the motion, response This gives the user the ability to monitor active/faulty steps as
concerning the actuation of a motion and information on the well as the fault cause, e.g. faulty transition conditions,
respectively achieved end positions (max. 16). simultaneously on the HMI device.
HMI Software
SIMATIC ProAgent process diagnostics software
SIMATIC ProAgent
Technical specifications
WinCC/ProAgent WinCC flexible /ProAgent
Interfaces
Can be used in conjunction with SIMATIC S7: SIMATIC S7:
programmable controllers: S7-300/S7-400; WinAC S7-300/S7-400; WinAC
Types of connection SIMATIC S7 Protocol Suite: SIMATIC S7 Protocol Suite:
MPI, PROFIBUS DP, Industrial Ethernet, TCP/IP MPI, PROFIBUS DP,
PROFINET IO, Industrial Ethernet, TCP/IP
Display units
Standard images for: Standard displays for easy embedding in user displays,
example project for MP 377
Number of languages for 3 (de/en/fr) 5 (de/en/fr/it/es)
online language selection
Functionality
Modification of HMI diagnostics data WinCC/ProAgent V6.0 and higher No
management in RT
Unit overview Yes Yes 3
Message display Yes Yes
Sequencer operating display Yes Yes
Diagnostics detail display Yes Yes
Display Yes/Yes/Yes Yes/Yes/Yes
STL/LAD/signal list
Display of operands with symbol and Yes Yes
comment
Criteria analysis When fault occurs/current status/can be archived When fault occurs/current status
Motion display
Number of viewable movements 6 6
Directions of motion 2 2
Number of viewable end positions 16 16
per movement
Documentation
In electronic format de/en/fr; included in scope of delivery de/en/fr/it/es; included in scope of delivery
Requirements
HMI software WinCC V7.0 SP3 WinCC flexible 2008
(ProAgent V7.0 SP3)
Operating system: WinCC/ProAgent V7.0 + SP2: WinCC flexible / ProAgent 2008 + SP2:
Configuration Windows Professional SP3, Windows 7 (32-bit) Ultimate, Windows XP SP3,
Business, and Enterprise Windows 7 Professional,
Ultimate, Enterprise
Operating system WinCC/ProAgent V7.0 + SP2: WinCC flexible/ProAgent for SIMATIC Panels:
Runtime Windows XP Professional SP3, WinCC flexible / ProAgent for WinCC flexible Runtime:
Windows 7 (32-bit) Ultimate, Business and Enterprise, Windows XP SP3,
Windows 2003 Server SP2, Windows 2008 Server SP2 Windows 7 Professional, Ultimate, Enterprise
STEP 7 V5.4 SP4 and higher V5.3 and higher
S7-GRAPH V5.3 SP6 and higher V5.2 + SP3 and higher
S7-PDIAG V5.3 SP3 and higher V5.1 and higher
S7-HiGraph No V5.3 and higher
Type of delivery CD-ROM / Runtime license Runtime license
(one license is required for each
target hardware)
HMI Software
SIMATIC ProAgent process diagnostics software
SIMATIC ProAgent