Metal Jacketed Gaskets
Metal Jacketed Gaskets, asthe name suggests, consist of a metallic outer shell with either a metallic or non-metallic compressed fiber
filler. The filler material gives the gasket resilience, while the metal jacket protects the filler and resists pressures, temperatures and
‘A wide range of materials are available to suit specific temperature and corrosive conditions.
Metallic: Soft Iron Nickel Nou-Metullic: Compressed Fiber Millboard
Carbon Steel Aluminum PTFE
Stainless Stecl Brass. Flexicarb*
Inconel” Copper Ceramic
Monel* (Other materials on request)
Metal Jacketed Gaskets are available in a wide range of sizes and configurations. They are traditionally used for heat exchanger appli-
cations, pumps, and valves, however the resilience and recovery properties of these gaskets are limited. Metal Jacketed Gaskets require
‘smooth flange surface finishes, high bolt loads, and flange flatness in order to seal effectively
‘When pass partition bars are required, itis sufficient to use a gasket with a welded pass bar construction, as opposed to an inte-
ral pass bar construction, Jacketed gaskets standard tolerances:
+1182" )-0 401-1192"
+118" )-0 40/-116"
If leakage occurs across the pass With a welded pass bar arrange- Due to the high bolt loads required
partition bar, dhe fluid will Tow ment dhe Muid is retained by the 1 seat metal jacketed gaskets,
‘long the length of the pass bar primary seal at the inner diameter _designers often incorporate stress
arrangements, and dhen Mow ww dhe of the gasket, Thus the primary raising nubbins on dhe Mange seal-
‘outer diameter of the gasket being seal maintains its function, provid- ing face, the principle being that the
retained only by de secondary seal. ing w seal of higher imeyrty ‘majority of the applied bolt load is
‘The intermediate part of the gasket ‘acting on a relatively small propor-
does very little ( effect the sealing tion of dhe yasket surface area, thus
capabilities of the gasket. high surface stresses result. It is
‘esertial hat the gasket iy installed
‘with the smooth side toward the
nubbin.