Professional Documents
Culture Documents
Flow sheets:
Main equipment as pumps, tanks, engines, heat exchangers, AHU and also some
main valves are indicated as rectangular blocks/valves in order to visualize the
principle of the system.
Only major pipe lines and line sizes, diameter only, are showed.
Only main capacities for equipment are indicated example as: pump flow, heat
exchangers cooling capacity, compressors flow/pressure, and volume of
receivers/tanks.
Pipes and Ducts with valves and equipment developed from flow diagrams or
after agreed list. Includes all pipes except minor pipes as drains or similar.
Developed P&ID and D&ID with valves and equipment more developed from
Design Level 1. Includes all pipes except minor drain lines in systems
Approximately pressure drop and heat load calculation followed up and critical
system as ballast/fire water calculation more developed.
Equipment sizing based on makers list vendors with Largest equipment sizing
principle
P&ID completely tagged i.e. equipment, instruments and valves are tag
numbered. Instrument included in vendor delivered unit is not included or
tagged.
Material list developed with line numbers for pipes, valves and special
equipments (strainers, flow meters etc.).
Design briefs/basis includes description of system with control in such way that it
is a base for the operational manual.
END