You are on page 1of 14

SHD

SEKO HYDRAULIC DRIFTER

1. DEC. 2011

SEKO DRILL CO., LTD.


150-885 35-2 801 / Zip. 150885 #801, BaekSang B/D, Youido-Dong, 35-2 Yongdeungpo-Ku, Seoul, Korea / Tel. 82-2-784-4420 Fax. 82-2-784-4421
http://www.vibrationhammer.com / info@vibrationhammer.com
Table of Contents

1 DEFINITION & PHOTO

2 ADVANTAGE

3 SPECIFICATION

4 CHARACTERISTIC

5 COMPARISON

6 R&D OVERVIEW

7 CONTACT
1. DEFINITION & PHOTO

SEKO HYDRAULIC DRIFTER (SHD 38)

- SEKOs self-developed model


- For 38 size drifter joint
- The state of art HYDRAULIC DRIFTER
- Apply accurate DRILL TECHNOLOGY
- Easier and more detail
- Cost-effective PISTON
- Easing hitting fatigue / noise / vibration emission
- Easy control
- Stable & Accumulate DRILL performance
1. DEFINITION & PHOTO
1. DEFINITION & PHOTO
2. ADVANTAGE

The advantage of SHD


Noise Low noise but accurate hitting
Power Similar to the power of SUSAN SP3, but 30% faster

Nitrogen pressure ACC gas pressure


High (47kg/cm2) low (4kg/cm2)
Hydraulic pressure The varying of hydraulic pressure is low
(max. 165kg/cmm2)
Repelling power The low vibration help an operator not to get tired
because the drifter is stable. Moreover, you can save
the fuel and there are no doubt of sub line loss.
Temperature The oil pressure is hardly going up to 65 degree in
spite of long time operation.
3. SPECIFICATION

Unit SHD 38
Weight 200
Hitting frequency Blow/min 2500~3100
Hitting energy kgf.m 40
Hitting Equipment
Flow l/min 75~90
Operation Pressure Kgf/cm2 125~160

High Pressure Kgf/cm2 47


ACC
Low Pressure Kgf/cm2 4

Rotation Frequency RPM 0~220

Rotation Power kgf.m Max. 60


Rotation Equipment
Flow l/min 70

Operation Pressure Kgf/cm2 Max. 140

Air Consumption in 7bar m3/min 4


4. CHARACTERISTIC

1) ACCUMULATOR (LARGE CAPACITY)


- Reinforced packing to protect oil leakage.
- Identify high pressure with low pressure.
(Enable to connect low pressure with high
pressure if urgent)
- Efficient design by varying external form.
- Easy connect each bodies with screw.

2) REAR COVER (COST EFFECTIVE)

- Shorter length but larger capacity than before


- Internal air drain design
- Cost-effective application
4. CHARACTERISTIC

3) CONTROL VALVE (UNIQUE CIRCUIT DEVELOPMENT)


- The circuit of control valve , cylinder body are different from the
existing (SOOSAN, FURUKAWA, etc.)
- Exclusive high efficient control valve system
(Not to hit up & down side in the valve housing)
(No bolt broken & burning problem)
- Keep existing advantages but get rid of most problems.
- Preparing the patent
- Independent valve system with guide in the valve box

4) PISTON (CREATIVE DESIGN)


- Creative design
- Exact center of gravity
(accurate hitting performance)
- Efficient hitting method
(hitting part hit the head of Rods exactly)
4. CHARACTERISTIC

5) FRONT COVER (EASY FLUSHING)


- Varying circuit for easy flushing
- Remove the notch
- The reinforcement of wear resistance
(use special material in bearing)

6) THE OTHERS
- Modularizing supplies
- The FRONT COVER parts are standard and
compatible with FRONT COVER to get easy.
- Use authentic PACKER seal kit
(Seal kits attached VALVE HOUSING & CYLINDER are upgraded
for durability.)
- Competitive external form design
(Simple, smooth, effective) (Adjustment for proper ratio)
(The top of motor moved on upper side)
5. COMPARISON

SANDVIK
SEKO EVERDIGM JUNJIN
(TAMROCK)
FURUKAWA

Model SHD 38 ED-100 JET-7,8 HL600 HD709

Operation
100~175 100~180 100~170 100~190 100~175
Pressure
Hitting
Rock Drill 43~50HZ 43~50HZ 40~50HZ 38~47HZ 40~50HZ
Frequency

Hitting Power 17.5KW 16KW 16KW 16KW 17.2KW

Weight 200KG 200KG 200KG 210KG 185KG

Diameter
64~102 64~102 76~100 66~102 64~89
of Bit

T38,T45 T32,T38 T38,T45


Drill Screw T38,T45 T38,T45
T51 T45 (T51)

Length
30,503,660 30,503,660 30,503,660 3660 3660
of Rod
6. R&D OVERVIEW

- The control valve of drifter will have 2 kinds of model (internal


type, external type) which is same form but different capacity.

- Rotation gear will be designed clutch type.

- The connection flushing part to hitting part will be designed 2


types.

- Damping housing will be applied to improve labor pain and


hitting power.
7. CONTACT

seko@sekodrill.com (salesio)
http://www.sekodrill.com

SEKO QR Code
Thank you

SEKO DRILL CO., LTD.


150-885 35-2 801 / Zip. 150885 #801, BaekSang B/D, Youido-Dong, 35-2 Yongdeungpo-Ku, Seoul, Korea / Tel. 82-2-784-4420 Fax. 82-2-784-4421
http://www.vibrationhammer.com / info@vibrationhammer.com

You might also like