You are on page 1of 15

ACMV SYSTEM OVERVIEW

Required ACMV
Comfort System
Level Design

The System Design shall be based on


the required comfort level or
condition

ACMV SYSTEM OVERVIEW

Apart from typical office and residential


purposes, special ACMV is also required
for:
Manufacturing processes
Operation theatres (hospitals)
Sensitive equipment

Each has different requirement in the


conditions of air.

1
ACMV SYSTEM OVERVIEW

TYPES OF AC SYSTEM

Water-Cooled System
Suitable for large system, where
energy need to be transferred in a
long distance

Air-Cooled System
Better for small system

2
Why water?

Liquid system is preferred because water with


high specific heat density can carry greater
quantity of energy per unit volume than air

Cp (air) = 1.006 kJ/kg.K (at 30C)


Cp (water) = 4.183 kJ/kg.K (at 30C)

To transport water can use small system like


pipe, as compared to air which require (large)
ducting

TYPES OF AC SYSTEM
Water-Cooled System

AIR Heat WATER Heat REFRIGERANT

Most common system in large scale operation.

Example: Commercial center, Office Buildings

3
TYPES OF AC SYSTEM
Some Users of Water-Cooled System:

New UTP Campus Academic Building


Casuarina Parkroyal Hotel
KLCC Twin Tower
Hospital Besar Ipoh
Kinta City
KL Sentral
Super Kinta What
about
Jame'Asr Hassanil Bolkiah Mosque GDC?

TYPES OF AC SYSTEM
Air-Cooled System

AIR Heat REFRIGERANT

Very common in small scale operation like


houses and small rooms. Could be economical
in some large buildings, depending on the type
of building occupation.

4
TYPES OF AC SYSTEM
Air-Cooled System

Examples: Window Unit

Lecture rooms
House
Small Office
Hotel Seri Malaysia

AIR-COOLED SYSTEMS

Air-Cooled
Split Units are examples
of Air-cooled system.

The AC systems for UTP


Main Hall and the Multi-
Purpose Hall are
examples of large Air-
Cooled Systems.

Systems can be
centralized or individuals.

What are the pros and cons?

5
TYPES OF AC SYSTEM

Water Cooled System

WATER-COOLED SYSTEM OVERVIEW

CWS COOLING
CHILLER TOWER
CWR

Ducting

CHWS
AHU Room Space
CHWR

6
WATER-COOLED SYSTEM OVERVIEW

GDC
CWS COOLING
CHILLER TOWER
CWR

HX

Ducting
CHWS
AHU Room Space
CHWR

WATER-COOLED SYSTEM OVERVIEW


AIR HANDLING UNITS

A heat exchanger
equipment to cool air
using chilled water in
tubes.

7
WATER-COOLED SYSTEM OVERVIEW
AIR HANDLING UNITS

More even air


distribution of air
through the cooling coil

Heat from motor.

Usually longer. Why?

Typical AHU Configurations

WATER-COOLED SYSTEM OVERVIEW

CHILLER SYSTEM

A refrigeration system that produces


cold fluids (cold water or air) as part
of the Air-Conditioning process.

There are many types of chillers available

In most cases refrigerants are used. Examples are


R-134a, R-12 (environmentally harmful)

8
WATER-COOLED SYSTEM OVERVIEW
THE HEAT IN THE
CHILLER CONDENSER
MUST BE REMOVED
CWR CWS FROM THE SYSTEM

To Cooling Tower
CONDENSER

COMPRESSOR

EVAPORATOR
CHWS CHWR How does
To AHUs it look
Like for
Air-Cooled
BASIC CHILLER SYSTEM System?

WATER-COOLED SYSTEM OVERVIEW

COOLING TOWER SYSTEM

9
ACMV SYSTEM OVERVIEW
COOLING TOWER SYSTEM
Required to remove heat from the water-cooled condenser (in chiller)

Warm condenser water (CWS) is pumped from the chiller to the


cooling tower.

The water is sprayed


from the top of the
tower.

Air is drawn/sucked
from the bottom of the
cooling tower (counter-
flow heat exchange).

The use of fins helps increasing the heat transfer to the atmosphere.

Comparison

Air-Cooled System Water-Cooled System

Can be operated individually at small System (with chillers) must be


areas; e.g. if at night only a small operated in full even if only to serve a
room requires AC, then only one or small area, and thus may consume
two ACSU is required, and thus save large energy in such a situation.
energy.

Not suitable for operation in large Suitable for operation in large areas
areas or ones that require long or ones that requires long
transportation of cool air because transportation of cool air because
very large ducts will be required water can carry more energy than air.
(lower density than water)

10
Considerations in design

In any design, the following aspects must be considered:

 Compliance to technical specifications; i.e codes,


standards, by-laws etc.
 Practicality of design: by considering
 System efficiency
 Ease of maintenance
 Operational issues
 Track record
 Cost effectiveness
 Time limitation
 Space limitation

ENERGY REGULATIONS

Malaysia is yet to have specific regulation on the use of energy in


buildings. So far only have policies/ guidelines are available:

ELECTRICITY SUPPLY ACT 1990

ELECTRICITY REGULATIONS 1994

GUIDELINES FOR ENERGY EFFICIENCY


(Ministry of Science, Technology and Environment)

CODE OF PRACTICE ON ENERGY EFFICIENCY AND USE OF


RENEWAL ENERGY FOR NON- RESIDENTIAL BUILDINGS

UNIFORM BUILDING BY-LAWS (UBBL)

ENERGY COMMISSION (SURUHANJAYA TENAGA)

11
Uniform Building By-Laws

Part III Space, Light and Ventilation


Part IX 3rd Schedule Interpretation & ASHRAE Stds

Part I: Preliminary
Part II: Submission of Plans for Approval
Part III: Space, Light & Ventilation
Part IV: Temporary Works In Connection With Building Operations
Part V: Structural Requirements
Part VI: Constructional Requirements
Part VII: Fire Requirements
Part VIII: Fire Alarms, Fire Detection, Fire Extinguishment & Fire Fighting Access
Part IX: Miscellaneous (1st - 10th schedule)

UBBL:
PART III: Space, Light and Ventilation

12
UBBL:
PART III: Space, Light and Ventilation

By-Law No. 40:


Air Wells (Natural ventilation)

UBBL:
PART III: Space, Light and Ventilation

By-Law No. 41:


Mechanical Ventilation Air-Conditioning

13
UBBL:
PART III: Space, Light and Ventilation

By-Law No. 41:


Mechanical Ventilation Air-Conditioning

UBBL:
Third Schedule

cmm: cubic meter of


air per minute

14
UBBL:
Third Schedule

END

15

You might also like