Professional Documents
Culture Documents
Screening Specialists
Introduction
Today, W.S. TYLER CANADA is part of the family owned Haver Group and
the only company in the world capable of supplying all aspects of the renowned
screening circle. The screening circle is a given necessity for any customer that
aims to separate his products according to size. The screening circle contains the
following components:
W.S.Tyler Canada TYCAN
For planning, designing, engineering and manufacturing complete Screening Solutions, W.S. TYLER CANADA is always the
right partner. Our decades of experience in providing all aspects of the screening circle ensure that you are receiving:
2
Eccentric Shaft Systems
(4-bearing Technology)
The N-
CLASS
The TYCAN N-Class into the shaft in form
is commonly used as of single eccentricity,
a primary screen tar- allowing for equip-
geted at increasing the ment operation with
throughput and the ef- consistent amplitude,
ciencies of the primary independent of the load
crusher in very heavy fed to the screen.
duty and aggressive
environments. Capable Due to the constant
of handling particles as dynamic operating
big as 78 x 39 x 39 conditions and conse-
and screening at cut quently the very high
sizes of to 12 it is G-Forces generated by
ideal for very demand- the technical principle
ing industries such of the vibrating screen,
as mining or crushed product particles are
stone. consistently launched
out of the classication
This operation prin- openings of the media
ciple consists of the creating a self-cleaning
use of a shaft and four effect, which minimiz-
bearings. The vibra- es material clogging
tion motion is worked and pegging.
N-CLASS in a typical layout
PRINCIPAL CHARACTERISTICS:
Consistent amplitude
Constant dynamic, load independent operating
conditions,
Adjustable frequency
Dry and humid classication
Cuts of up to approximately 12
High classication capacity and better classica-
tion efciencies
Use of perforated plates up to 4 with conical
opening as classication media
Allows for various classication deck congura-
tions
Allows for the classication of viscous and
sticky products
Does not transmit vibrations into the structure
Width of up to 8 ft.
Length of up to 22 ft
Optional full or partial dust enclosure
Allows for immediate stoppage (either by elec-
tric brake or by reversal) eliminating residual
vibrations
3
Double Eccentric Shaft Systems
(4-bearing Technology)
The F-CLASS
The TYCAN F-CLASS is the
number one vibrating screen for
classication in the heavy mining,
mineral and crushed stone indus-
tries. The positive circle-throw
motion of the F-CLASS is devel-
oped by a counterbalanced double
eccentric shaft, which is supported
by four double spherical roller
screen bearings. Rubber mount-
ing units dynamically balance by
isolating the vibrating body from
the stationary base frame. The
shaft is supported on the base by
side arm assemblies that are also
isolated on rubber mounting units.
TYCAN F-CLASS in a typical layout
The F-CLASS free oating action
permits the shaft to nd its natural
center of rotation without strain or
thrust on the bearings. This feature
minimizes maintenance and down-
time and prolongs the life of the
bearings.
PRINCIPAL
CHARACTERISTICS:
Consistent amplitude
Constant dynamic, load inde- F-CLASS
pendent operating conditions model 900
Adjustable frequency at speeds
of 750 to 1050 RPM
Dry and humid classication
Solid HUCK bolted con-
struction
Hands Free tube housing
assembly for easy bearing
exchange
Allows for various classica-
tion deck congurations of up
to 3 decks
Allows for the classication of
viscous and sticky products
Does not transmit vibrations
into the structure Counterbalanced
Installed at angles of 15 to 25 double eccentric
degrees shaft assembly
Width of up to 8 ft (2500mm)
Length of up to 24 ft
(7500mm)
Optional full or partial dust
enclosure
Optional ball tray for classica-
tion of ne and sticky material
4
Concentric Shaft Systems
(Two-bearing Technology)
The T-CLASS
The TYCAN T-CLASS vibrating screen with eld
proven features makes it a versatile performer. It
is designed to be a rugged dependable vibrating
screen for use in the screening of a wide variety of
materials.
Hands Free
Tube Assembly
5
Horizontal Screening Systems
The L-CLASS
The TYCAN L-CLASS is L-CLASS model 6x16
designed to operate horizon-
tally and is engineered for (2000mm x 5000mm) 1D
various service applications.
Its a superior performer in
sizing, washing, conveying,
and dewatering of materi-
als of intermediate cut size.
The L-CLASS is ideal for
wet or dry applications and
meets demand in existing or
planned plants where head-
room is limited.
6
Horizontal Screening Systems
The XL-
CLASS
Todays markets have friendly lubrication via
increasingly been oil the demand for avail-
demanding higher ability is addressed by
production rates in form bearing lifetimes as high
of bigger machines as as 50,000 hours (applica-
well as superior machine tion dependant).
availability. Traditional
shaft driven technology
reaches its limitations Not only does the XL-
at a determined width Class set new standards
due to the mechanical in its drive principle but XL-CLASS 8 x 20 (2400mm x 6000mm) 2D
deection of the shaft also in its body design.
resulting in unaccept- Enabling forces of more
able bearing lifetimes. than 5g (application
TYCANs solution to the dependant) the XL-Class
markets demands and the is engineered using state
technological limitations of the art Finite Ele-
of the shaft technol- ment Analysis technol-
ogy is the exciter driven ogy (FEA). FEA enables
XL-Class. The exciter structural calculations by
is a completely incased simulating the machines
drive unit consisting of dynamic behavior in form
short shafts supported by of a 3D model.
closely positioned bear-
ings. Mounted on a spe-
cially designed over head The results of the simula-
bridge the exciter tech- tion allow the determina- XL-CLASS 8 x 24 (2400mm x 7500mm) 1D dewatering
nology allows TYCANs tion of resulting tensions
XL-Class to be built at and natural frequencies to
widths in excess of 8ft assure a technologically Traditionally developed construction materials such
addressing the market optimized and economi- for the mining indus- as sand, crushed stone
need for bigger machines. cally sound design. tries such as copper and and aggregates due to its
Due to carefully chosen iron ore the XL-Class is impressive payback and
bearing sizes in combina- also nding its way into maintenance friendliness.
tion with maintenance
PRINCIPAL CHARACTERISTICS:
Driven by oil lubricat- Allows for various clas-
ed, easily interchange- sication deck congura-
able exciter units tions of up to 3 decks
Bearing lifetime of up Can be installed of 15
to 50,000 (application degrees
dependant) Width in excess of 14 ft
Adjustable frequency at (4000mm)
speeds of 750 to 1050 Length in excess of 36 ft
RPM (11000mm)
Versatility in stroke by
weight additions to the
XL-CLASS Exciter Technology exciter counterweight
7
Horizontal Screening Systems
The XL-CLASS
Banana
Certain applications call for versatil-
ity in changeability of screening
surface angles. TYCAN answers this
market demand with the XL-Class
Custom Slope Deck, designed to
provide high yield and efciency in
screening.
Drive system:
8
De-Watering Systems
The D-CLASS
The TYCAN D-Class was mainly
conceived for the iron ore industry
in order to minimize the per-
centage of water residue in the
product, enabling a substantial
improvement in the handling,
transport and piling up of ore.
9
High Speed Screening Systems
10
Fine Screening Systems
FINELINE System
Feeding
H-CLASS V85 4x15
(1200mm x 4500mm)
Screening Media
PRINCIPAL CHARACTERISTICS:
Simple and modular design
Higher screening capacity (t/m2/h) when Adjustable
compared with traditional screens Inclination
Higher classication efciencies
Dry classication
Drive by means of vibrating motors
Adjustable frequency, amplitude and incli-
nation
Static screen box, avoiding the transmission
of vibration into the structure Vibrating
Overow Motor
Allows for quick and easy change of the
screening media
Low energy consumption
Reduced maintenance
Enclosed for dust collection
Cuts between 0.1 and 5 mm
Allows for congurations of 1 or 2 classi-
cation decks
Modules up to 6 ft wide x 5 ft long Underow
11
Engineered Media
12
Vibrating Feeding Systems: V-Feeders
TYCAN vibrating feeders and feeding and distribu- The drive is designed to may be congured openly
are used in many and tion of materials to the use two vibrating motors or enclosed to ensure dust
various applications, one vibrating screens. with opposite rotation collection.
of which is the withdraw- directions. Depending on
al of product from silos the necessity, the feeders
Model UF Model UF R
Model UF with
support frame
Model UF A
13
Hydro - Clean
Before Afterwards
ADVANTAGES:
Highest cleaning results possible
Lowest water consumption available
No tool wearing water jet
The water jet reaches directly the material to be
washed
The drum is coated with PUR-standard screens
Optimum material adaptation
1- Input material; 4- Washing chamber;
2- Washing rotor; 5- Material output conveyor;
3- High pressure nozzle; 6- Contaminated water.
14
Pelletizing Systems
15
Extraordinary Solutions
King-Sized Screens
For customers that demand the answer to extraordinary prob- HBL Latinoamericana team
lems, TYCAN has the solution. Those projects are designed on
the highest technical criterias and the most modern technology.
16
Extraordinary Solutions
Engineered to Application
L-CLASS
X2-400
8 x 24
(2400mm x
7500mm)
3D
T-CLASS
CD1102
Grizzly
17
Services
18
Services
Vibration Analysis
19
www.wstyler.com
225 Ontario Street P.O. Box 3006