Professional Documents
Culture Documents
Membrane Chemistry:
Membrane Type:
Fiber Support Chemistry:
Nominal Pore Size:
Outside Fiber Diameter:
Potting Material:
Module Frame Material:
Permeate Collection Tube Material:
Storage Solution:
Proprietary PVDF
PVDF-1 braided hollow fiber for outside-in operation
Polyester
0.03 m
0.1 inch (2.6 mm)
Proprietary epoxy compound
316 Stainless Steel
PVC, PN 10 and PE manifolds
Glycerin
PRODUCT
SPECIFICATIONS
Model
PSH 300
PSH 600
PSH 1800
OPERATING &
DESIGN
INFORMATION*
Temperature Range:
Maximum Filtration Transmembrane Pressure:
Maximum Backflush Transmembrane Pressure:
Allowed Instantaneous Air Flow Rates:
PSH 300 and PSH 600 models:
PSH 1800 model:
Allowable pH Range for Cleaning
Maximum Allowed Total Chlorine @ 95F (35C) or Lower:
Maximum Allowed Total Chlorine @ 95F (35C) or Lower:
Maximum Allowed Total Chlorine Contact:
Part Number
PUR-PSH37-8
PUR-PSH37-16
PUR-PSH41-44
41 - 104F (5 - 40C)
9 psi (0.6 bar)
9 psi (0.6 bar)
0.016 0.034 scfm/ft2 (0.30 - 0.63 Nm3/hr.m2)
0.015 0.030 scfm/ft2 (0.27 - 0.55 Nm3/hr.m2)
2.0 10.5
1,000 ppm @ pH 8 or higher during backflush
2,000 ppm @ pH 8 or higher during recovery cleaning
500,000 ppm-hrs cumulative
NOMINAL
DIMENSIONS &
WEIGHT*
Model
PSH 300
PSH 600
PSH 1800
L
Inches (mm)
35.67
65.43
88.35
(906)
(1,662)
(2,244)
W
Inches (mm)
H
Inches (mm)
Dry Weight
Pounds (kg)
35.16
(893)
35.16
(893)
69.10 (1,755)
93.82
95.35
99.61
700
(320)
1,300
(590)
3,090 (1,400)
(2,384)
(2,422)
(2,530)
CONNECTIONS
Permeate
Model
Type
PSH 300
PSH 600
PSH 1800
Flange
Flange
Pipe
Type
Air
Flange
Flange
Pipe
PURON HOLL
P
LOW FIBER MODULES
P 600
PSH
PSH 1800
M
Module
Transp
port and Storag
ge Conditions:
Storage of PURON
S
N Modules
S
Storage
of PURON
N modules shouldd be carried out att ambient temperaature
(441 to 77F / 5 to 25C). Extended exposure to UV source musst be
a
avoided.
The PURON modules must not be stored forr longer than 3 moonths
o site.
on
T
Transport
of PURO
ON Modules
T
Transport
of PU
URON modules should be carrried out at ambient
teemperature (23 too 113F / -5 to 45C).
W
When
the PURON
N modules are beeing transported by
b ship , the PUR
RON
m
module
should bee placed in seawoorthy packaging and
a stored at ambient
teemperature, provided that such tem
mperature is between 23 and 113F
F (-5
a 45C).
and
Dry-up Protection
D
O
Once
the PURON hollow fiber moddule has been com
mmissioned with an
a
a
aqueous
medium, itt should never be stored
s
dry. If the membrane plant is not
n
o
operated
for 7 dayys or less, the moodule may be keppt wet by keeping it
s
submerged
in the biiomass, provided thhe following conditions are met:
The biomass is healthy and is aerated and the recirculation of biomass
over the membraane chamber is funcctioning properly.
The module is fully submerged in thhe biomass.
The module aerration is switched on every 30 minuutes for a period of 1
minute to assuree mixing of sludge innside the module.
PSH
H 300
The information containned in this publication iss believed to be accuraate and reliable, but is not to be construed ass implying any warrantyy or guarantee of perfoormance. We assume no responsibility,
T
obligation or liability for results obtained or dam
mages incurred throughh the application of the information contained herein. Refer to Standdard Terms and Conditiions of Sale and Perforrmance Warranty
d
documentation
for additiional information
The STY
YLIZED K and KOCH
HKLEEN trademarkss are registered in thhe US and other countries; the FLOW LINES DESIGN is reggistered in the US; and
PURO
ON is a registered traademark of Koch Meembrane Systems, GmbH
G
in Germany and
a other countries.
Koch Membranee Systems, Inc. is a Koch
K
Chemical Techhnology Group, LLC company.
2011 Koch Membrane Syystems, Inc. All rightss reserved worldwide.
0
06/11
Rev. 11-2