Professional Documents
Culture Documents
Mobile Plant
Prestart Checklist
Verify Check
Address:
City/Suburb:
Phone:
Verify Check
SWL
Crane Chart
Plant Model:
Date:
CAB
Verify Check
Cleanliness
Seat
Operator Restraint
Instruments & Labelling
Levers / Controls
Pedals
ROPS AS2294
Windows / Wipers / Washers
Rear View Mirrors
Plant Owner:
December 4, 2000
WARNING DEVICES
Horn
Amber Flashing Beacon
Reversing Alarm
Verify Check
Verify Check
Verify Check
Serial No.:
Exhaust
Pivots
Connecting Rods
Safety Pins
(no excessive wear)
Signature:
Date:
Verify Check
Engine Guarding
Verify Check
Verify Check
Plant to conform to manufacturers specifications and HSE Regs.
Plant Operator is to provide daily checksheets to Plant Group on
a weekly basis
Where applicable, Personal Protective Equipment must be worn.
Plant Log Book Detailing service history in accordance with
Manufacturers specifications should be written legibly in
English.
Contractor must produce proof of competence of operator, e.g.,
Certificate of Competence, Licence, Detailed Log Book
SWL
Quick Hitch
Safety Pins
(where applicable)
Verify Check
SWL
Hydraulics
Rams
Verify Check
Hoses
Connections
(check for excessive
wear, leaks and creep)
KEEP CLEAR
Verify Check
Connecting Rods
& Safety Pins
Travelling Hitch
Hydraulics
Verify Check
Verify Check
Tyres
Wheels
Brakes
Park Brake
Position:
Date:
HSE-INSP-0002
Issue No.: 1
Plant Make:
Form:
Verify Check
Stabilisers
Verify Check
Handrails
Steps
Verify Check
Rams
Hoses
Connections
(check for excessive wear,
leaks and creep)
Instructions:
Verify Box to be ticked by Owner / Supplier / Operator prior to arrival onsite.
Check Box to be ticked after visual inspection by HSE Department
This is to certify that the plant being supplied conforms to the relevant HSE Legislation, and the requirements as detailed above. HSE Department will assess this Pre-start Checklist to ensure the supplier has verified compliance to HSE Legislative requirements and, to
register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. HSE Management will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant HSE Legislation.