Professional Documents
Culture Documents
,limited
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
Printer
Model:UV210C
Thanks for purchasing our A4
UV flatbed printer
UV210C.This user manual will guide you how to use it. Please
make sure you read and full understand this manual before your installation and using. Please keep this manual well for
your reference in emergency.
Index
Chapter 1 The package List
Chapter 2 The A4 LED UV printer introduction
Chapter 3 The preparation work before opening the machine
Chapter 4 The preparation work before printing
Chapter 5 The detail Process of printing object
Chapter 6 The note matters and trouble shooting
Chapter 7 The machine warranty
Chapter 8 The machine specification
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
Note:
1.Please put the uv bottles on the bottle bracket or same height place .
2.Please open the
printer cover
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
Notes :
1.Due to it is first time to use the printer, please check whether
carry out the printing task . Please check following for checking whether there is water circulation.
A. you can touch the water tube and feel the water is moving
B. The indicator light will be on during the UV lamp is working
2. Please add the water when there is not enough water in the water tank .
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
Notes:
1. Please feed the different color uv ink corresponding the color bottle .
2. Since uv white ink is very easy blocked,so please shake the white ink bottle everyday before using.
3. If you do not use the uv printer more than one week, please use the cleaning linquid to cleaning the printhead .
4. You can use both Y,K,M,C,LM,LC and Y,K,M,C,W,W ink type. If you use Y,K,M,C,W,W ink type, please put the W,W into the
LM, LC place.
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
Please pull the platform to the front position completely , then open the general power of the machine ,and then open
the power of the printer , the printer will be in self-checking process. When do self-checking process, the printer power
button will be green flash, print head
will move right and left .After self-checking ,the printer power button will keep in
long green light state . When the printer power button is in long green light state , the machine is in normal state
(Sometimes if both the ink button and paper button is flash , please do not worry.It is normal situation .please close the
power of printer and open the power again )
The
Note:
Please do machine self-checking before it start working every day .
Note: if the printer driver that we give that you cant be installed successfully, you can to download it from epson
website:www..epson.com or you contact us freely.
power cleaning
in Maintenance
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
Note : The printer should be done the power cleaning only under the following situation :
A. The first time to fill the ink for the machine , you can do the power cleaning for
tube quickly.
B. When the print head clog seriously , you can do the power cleaning .
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
4.3.2 Method two : print head ink transmitting from the waste ink pipe.
Generally speaking , when you finished the print head cleaning , the ink will flow into the print head completely . If not ,you can
try the following method to transmit ink into the print head easily.
1. Transmit the ink by syringe without needle as following.
2.After suction ink with syringe, we should do head cleaning 1-2 times to feed the print head with ink.
4.3.3 Method three: print head ink transmitting from ink sac.
Generally speaking , when you finished the power cleaning , the ink will flow into the ink sac completely . If
not ,you can try the following method to transmit ink into the ink sac easily .Before doing method two,please
make sure the following.
AIf the printer is already turn on, please turn off the power switch firstly.
BTurn on the total power when the print head cartridge dont move.
CTurn off the total power immediately while the print head cartridge move out from the side. .
DAt this time, the print head cartridge is not lock, you can easily move it back and forth
by hand
Now lets start method two as following.
1Transmit the ink by hand with syringe as following.
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
2.after suction ink to the ink sac, we should do head cleaning 1- 2 times to feed the print head with ink.
in Maintenance
Click Print
3) To compare the printed nozzle checking line and the nozzle line in your computer as following picture
Print the nozzle checking line, if
every color line is complete, that
means you can print the picture
normally.
Note:
When the machine can be used normally, but there is broken nozzle checking line, please do the head
cleaning,
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
Chapter 5 The detail process of the media printing via RIP software
The Acro RIP software is convenient to adjust the printing position as well as it can adjust its printing ink volume according with
customers request. It is very simply operation.
The RIP is included by two parts, one is RIP driver (CD), the other is software dog(USB) .
Due to this software is a direct drive and modify printer system core program, some security software and anti-virus software w
ill protect the core program of software make the software can not be installed , so we need turn off the safety procedures and
anti-virus program before installing the software .This Acro RIP 8.2 can be used for in windows XP, 2000,vista and windows 7,
windows8,windows 10.
Following it is the process of operation.
Step1. Install the driver of the RIP software
(It will have the driver for RIP in our CD or we can send its driver via email ) or
Step2 after finishing the installation, you can see two icons
is used for light color product printing with M,Y,K,C,LM,LC ink type..
is used for dark color product printing with M,Y,K,C,W,W ink type..
or
in your desktop .
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
Step 4 Click file and then choice open to put the picture to the RIP software,and click the icon
in
,appear following.
Step5
, click
INK Chnnel:
If there is white ink in the CISS, or there just have
Y M C K, no other inks, you must choose the color
pattern for Y K W W M C
Ink Limit is allowed to adjust by
yourself ,usually 50% is the same effect as without
software
If you find the print design of a single color
slants deep or shallow, you can set up in a single
color area
,click
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
Paper Sizemean the printer size , please set as
the red circle
Output Position refers to the print position that
the material printed on the platform, please remember
the width and height of printing ,we will make this as
origin of coordinates
Following is we Take
Step 7 Because there is a distance between the UV light and the print head, the movement scope of the
print head working is limited to whole printed scope .This will cause the images between this distance can
not be UV light irradiation ,Which means can not be curing . So we must artificially expand the scope of print head
movement .We need draw a vertical bar near the picture left side 3cm, do as the following picture (the
operating sequence from 1 to 7)
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
,click
Step 9 : After the picture setup well, adjust the height of the platform ( it will be the suitable height which the platform does not touch
the limited bar , keep about 2MM during the print head and platform ) , then pull the platform to the rear of the machine completely
Step 10:
picture
,click
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
Step 11:
after white ink task finished, you can print color ink ,as followings
Step 12 After click the print in the computer , the print head will start to print and the platform will move to front automatically , the
power of the printer button will green and flash , finished the printing task , the platform will stop in the front completely , the power
of printer will be keep green light .
Note:if you want to print emboss effect picture, you can set the parameter as following suggest :
smooth effect,no striping on the picture
DPI 2880*1440,ink amount 40% color is a litter light
smooth effect,a little striping on the picture
DPI is 2880*1440 ink amount 50% color is good
smooth effect, no striping on the picture
DPI 2880*2880 ,ink amount 50%color is good
emboss effect:
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
image. We had helped you do the limited board before we send the
cargo out. It is the best height to be printed objects from the nozzle, when the print tray just can pass the limit board
7.You had better add sewing machine oil on the track that the print head move back and forth,in order to reduce
resistance,otherwise it will happen flash red when start the machine ;Whats more,we should add oil on the track that the print
tray go through, if the track resistance is big,the tray will not move, it will affect the print precision too.
8.Because the white ink is easy to precipitate, it is best for customer to shake the white ink for several minutes before using the
machine everyday.If you dont use the machine for a long time ,please shake the white ink for several minutes and suction the
white ink from the ink sac again(the way please see Suction Ink),the ink that suction out can put back into the bottle and
continue use,after suction the ink ,you should do head cleaning again.
9.The UV ink will curing when come across the UV-light, so please dont lay the machine on the place where can be shined.
10.Attention of choosing picture.
A.No matter the pictures from the Internet or the customer offer, you must determine the clarity of the picture,poor clarity will
cause poor print quality. Generally speaking, we should provide more than 300dpi to get good quality .
B.When we need to print pictures, it is best for us to design the picture the same size as material printed by PhotoShop (or AI),
please dont directly modify the size in the AcroRIP, otherwise the picture will widen or lengthen, the picture will be
disproportionately.
C.disproportionately you can study the PS on networkStudy website:http://www.duote.com/tech/photoshop/
NOTE: you just need do the strong cleaning in the following cases:
1).you can do strong cleaning when first time to use the machine , so that you can suction the ink to the pipe and print Head fast.
2).when the print head is a little clogging,you can do strong cleaning.
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
11.Check the water cooling pump regularly: UV LED is cooled by the water,please check whether there is
month.
12.Ink reset . when the Ink light keep flash and computer reminds that there will be no ink,we need do ink reset.Please kindly
note it is no relation with the actual ink amount, just have relation with chip count capacity,We can do ink reset when the Ink
light flash advanced, also can do it when the light in long red state .All types of printer need to do ink reset on the market, it is
not the machines problem, please dont worry.Please use the ink reset software for ink reset.
13.Waste ink reset. when the Ink light and paper light flash one after one. we need do waste ink reset by software.
Print size
Print Speed
Print Height
Height adjustment
1.5 picoliter of 90 / per color inkjet hole slightly * 6 = 540 color spray holes
User definable Up to 5760 x 1440 dpi
User definable up to A4: 21*30cmwith led on :16*30cm
55 seconds/A4 of full-color photo
0-7.5cm
Via one knob to adjustment
Warranty
Printer certification
CE ,FCC,RoHS certification
Ink Consumption
Y/K/LC/LM/M/C (it just can print light materials when all the ink is color)
Y/K/W/W/M/C (it can print light and dark materials when there have white
ink)
15 ml per SQM printed area
Printing software
using computer automatic cleaning function "printer properties maintenance - nozzle cleaning"
Printer consumable
UV ink
www.multiflatbedprinter.com
multi@multiflatbedprinter.com
PRINTER CONNECTIVITY
Power supply
Interface
cooling system
Water cooling
Operating Systems
Operating Temperature
0 to 35 (50 to 95 F)
Operating Humidity
20% to 80%
WEIGHTS, DIMONSION
Printer Dimensions
Package dimensions
Package include
60*46*35cm,30kgs
78*57*45cm ,38kgs ,wooden case
Printer ,Driver CD ,USB cable, power cable,instructions