Professional Documents
Culture Documents
1.
2.
3.
4.
5.
6.
7.
8.
9.
24. To enter Service mode (Ciphering Info) Battery status (ADC, RSSI reading) :
*#0228#
Display IMEI. IMEI (International Mobile Equipment Identity) is a unique 15digit number assigned to all cellular devices. We can use this number to block a
mobile phone from being used by another person or phone company if it has
been lost or stolen.
Use this to displays your Samsung handset's IMEI Number IMEI (International
Mobile Equipment Identity) is a unique 15-digit number assigned to all cellular
devices. We can use this number to block a mobile phone from being used by
another person or phone company if it has been lost or stolen.. The same code
works from all other GSM handsets.
Type *#06#
Enter the service menu on newer phones like Galaxy S III
Type *#0*#
Show Software Version.
Use this to Show Software Version of your handset.
Type *#9999#
Show Software Version (instructions).
Use this to Show Software Version (instructions) of your handset.
Type *#0837#
Show Serial Parameters.
Use this to the Show Serial Parameters of your handset.
Type *#0001#
Activates the smiley when charging.
Use this to Activate the smiley when charging on your handset.
Type *#9125#
LCD Contrast.
Type *#0523#
Battery status (capacity, voltage, temperature).
Type *#9998*228#
Program status.
Type *#9998*246#
Test Vibrator - Flash the screen light during 10 sec and vibration activated.
Type *#9998*842#
Vocoder Reg - Normal, Earphone or Carkit.
Type *#9998*862#
Diag.
Type *#9998*872#
Reset On Fatal Error.
Type *#9998*947#
Last/Chk.
Type *#9998*999#
Yann debug screen (Debug Screens).
Type *#9998*9266#
Software version.
Type *#9998*9999#
Changes serial parameters (s=?, f=0.1, t=0.1).
Type *0001*s*f*t#
Phone information
Battery information
Battery history
Usage statistics
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
* Google account settings stored in your phone
* System and application data and settings
* Downloaded applications
It'll NOT remove:
* Current system software and bundled applications
* SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on
"Reset phone" button. So you get a chance to cancel your operation.
*2767*3855# - Think before you give this code. This code is used for factory
format. It'll remove all files and settings including the internal memory storage.
It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you
remove the battery from the phone. So think twice before giving this code.
APIs and OAuth 2.0, but has since then expanded to cover a large variety of
Google's services, allowing applications to easily communicate with the services
through common means, being internally referred to as simply GMS. As of
January, 2014, it has been downloaded more then one billion times on Android
devices.
*#*#759#*#* - Access Google Partner setup (Rlz debug interface).
*#872564# - USB logging control
*#9900# - System dump mode
*#*#97#*#* - Language and Keyboard settings
*#*#46*#*# - Reset Sim
*#301279# - HSDPA HSDPA means High Speed Downlink Packet Access
and is a technique used in the UMTS mobile communication system, the
download speeds of currently 3.6 Mbit/s to 7.2 Mbit/s. HSUPA is developed
commercially since 2007 in Germany. High Speed Downlink Packet Access
(HSDPA, 3.5G, 3G + or UMTS broadband) is a data transmission method of the
cellular standards UMTS, which was defined by the 3rd Generation Partnership
Project. The method enables DSL-like data rates in mobile networks. HSDPA is
available in Germany, among others by the network operators Vodafone, E-Plus,
O2, and telecom and in Switzerland by Swisscom, Sunrise and Orange. In Austria
operate the A1, T-Mobile, Orange and Three HSDPA networks./HSUPA HSUPA
means High Speed Uplink Packet Access and is a technique used in the UMTS
mobile communication system, the upload speeds up to 5.8 Mbit/s. High Speed
Uplink Packet Access (HSUPA) is a transmission method of the UMTS mobile
radio standard that allows higher data rates in the uplink and reduces the round
trip time (often referred to as ping). HSUPA Category 6 were up to 5.76 Mbit / s
and category 9 (Release 9) up to 23 Mbit / s can be achieved. HSUPA is part of
Release 9 of UMTS. Control Menu
*#7465625# - View phone lock status
*#*#273283*255*663282*#*#* - This code opens a File copy screen where
you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#* - This code can be used to enter into Service mode. You
can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
GSM codes
Type the code and press send button.
Cancel:#43#
Check:*#43#
Restore PIN by PUK: In mobile devices, the PIN acts like a password
preventing other people from gaining unauthorized access to your device. This is
a numeric code which must be entered each time the device is started (unless
the PIN security feature is turned off). A PUK code is required if a GSM SIM card
was locked after entering the wrong PIN code three times in a row. Entering a
wrong PUK code ten times in a row disables the SIM card permanently.
**04*PUK*PIN*PIN#
Restore PIN2 by PUK2:
**042*PUK2*PIN2*PIN2#
International Mobile Equipment Identity (IMEI):*#06#
Type code and press the green key!
Caller's ID: *#30#
My caller ID: *#31#
Answering number: *#76#
My ID on ans: *#77#
Type*#61# and press call - Check redirection status.
Cancel all redirections:##002# ;
*43# to activate call waiting, to deactivate#43#.
If your phone doesn't have incoming call barringand outgoing call barring, You
can try this.
For outgoing call barring dial *33*barcode*# and pres OK.
To deactivate it dial #33#barcode*#.
On any phone on any network type in **43# to enable conference calls. You can