You are on page 1of 190

13 /04/2014

SER

1
1.1
1. 1. 1

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

POWER TRANSFORMERS

33KV & 34.5 KV PRIMARY


Applicable Standards:

POWER TRANSFORMERS UP TO 30 MVA


ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ABB Bilbao

SPAIN-Bilbao

Yes

53-TMSS-01

Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.


Aug 2009, it is pre-qualified for Power Transformer up to 132kV,
100MVA as confirming to SEC specification # 53-TMSS-01, rev.0
with the following conditions:

All type, design, special & routine tests (including short


circuit test) as per SEC specifications/standards shall be carried
out on the first unit to be supplied to SEC in securing an order in
the presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.

Seven (7) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

ABB Elektrik Sanayi A.S. [previously ABB ESAS]

TURKEY-Istanbul

Yes

ABB TRANSIT OY

FINLAND

Yes

AREVA

GERMANY

Yes

BEST

TURKEY

Yes

Pre-Qualification & Participation for current & future SEC's


Projects subjected to the mutual agreement between SEC & ABB
dated 09 March 2009

Complete Type, Routine / Sample tests for first order & 10 Years
Warranty from the date of PAC is required.

Page 1 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
CG Electric Systems Zrt. (previously GANZ
Transelektro Electric Co., Ltd.)

FACTORY LOCATION
HUNGARY-Budapest

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD Letter 11-01981-1-03032301 dated July 11,
2011, it is pre-qualified for Power Transformers rated up to
132kV/100MVA as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following conditions:
All Type, Special & Routine tests as per SEC
Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the next unit to be supplied to SEC in an accredited Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer through their letter #
10513/10/CG dated July 04, 2011 and letter# 20338/12/CG
dated August 04, 2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 15, 2010.
Pre-Qualification & Participation for current & future SEC's
Projects subjected to the fulfillment of confirmation letter #
20342/12/CG dated August 14, 2012 by manufacturer.

CG POWER SYSTEMS

BELGIUM

Yes

CROMPTON GREAVES

INDIA

Yes

DAIHEN CORPORATION

JAPAN-OSAKA

Yes

FUJI Electric Co.

JAPAN--

Yes

HAWKER SIDDELEY

United Kingdom

Yes

HITACHI Ltd.

JAPAN--

Yes

HYOSUNG (HICO)

KOREA, Republic of-Changwon

Yes

HYUNDAI

KOREA, Republic of-Ulsan

Yes

SUSPENDED FOR SEC 2005 PROJECTS AND ONWARD

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

Page 2 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ILJIN Electric Co. Ltd.

FACTORY LOCATION
SOUTH KOREA--

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 12-03077-30504401 dated September 15,
2012, ILJIN ELECTRIC Co. Ltd - Korea is pre-qualified for Power
Transformers 33kV & 34.5kV rated up to 30MVA as conforming
to SEC Specification # 53-TMSS-01, Rev.0, with the following
conditions:
All Type, Routine and Special testes as per SEC
Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC of Power Transformers 33kV
and/or 34.5kV rated up to 30MVA in The Manufacturer's Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer ILJIN ELECTRIC Co.
Ltd. through their letter # IJ-20120725-01 dated July 25, 2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
the manufacturer ILJIN ELECTRIC Co. Ltd. through their letter #
IJ-20120628-01 dated June 28, 2012.

JEUMONT SCHNEIDER

FRANCE

Yes

KONCAR D&ST

Croatia/Hrvatska

Yes

Based on S&SD Letter 12-02568-30504401 dated September 17,


2012, it is pre-qualified for Power Transformers rated up to 33kV
& 34.5kV, 30MVA as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following conditions:
All Type, Special & Routine tests as per SEC
Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC in an accredited Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated 09 March 2006.

Page 3 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Liaoning - Efacec Electrical Equipment Co., Ltd
(LEEEC)

FACTORY LOCATION
CHINA-Liaoning Province

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
SUSPENDED for all SEC/National Grid SA ongoing and
forthcoming projects based on VP, Engineering letter #
13-07937-30504401 dated December 24, 2013.
The old remark before suspension was:
Based on S&SD Letter 12-01675-30504401 dated May 20, 2012.
It is prequalified for Power Transformers rated up to 30 MVA as
conforming to SEC Specification# 53-TMSS-01 with the following
condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by Liaoning - Efacec Electrical Equipment
Co., Ltd (LEEEC) through their letter # Nil dated April 18, 2012.

MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

PJSC Zaporozhtransformator (ZTR)

Ukraine-Zaporizhia

Yes

Based on S&SD letter# 13-07568-30504401 dated December


31, 2013, it is pre-qualified for Power Transformers rated up to
100 MVA, 132 kV as conforming to National Grid SA specification
# 53-TMSS-01, Rev.01, with the following conditions:
All Type, Special & Routine tests as per latest National Grid SA
Specifications/Standards & IEC requirements together (with
Thermal & Dynamic short-circuit calculations per IEC 60076-5)
shall be carried out on the next unit to be supplied to SEC/
National Grid SA in an Accredited Testing Laboratory in the
presence of three (3) National Grid SA Engineers & one (1)
National Grid SA approved Independent Inspection Agency (IIA)
Inspector. All costs of which shall be borne by the manufacturer.
This was confirmed in writing by the manufacturer through their
letter 1/115-2261 dated August 15, 2011.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
1/115-2266 dated August 15, 2011.

Page 4 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SC ELECTROPUTERE SA

FACTORY LOCATION
Romania-Craiova

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 11-002054-1-03032300
dated10/7/2011, it is prequalified for Power Transformer up to
132kV, 100MVA, as conforming to National Grid SA specification
# 53-TMSS-01, Rev.0 with the following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery in case of direct material supply order. This was
confirmed by SC Electroputere SA through letter 27500 dated
14/06/2010.

SCHNEIDER ELECTRIC

TURKEY-Kocaeli

Yes

SCHORCH

GERMANY

Yes

SIEMENS AG (NURNBERG)

GERMANY-NURNBERG

Yes

SIEMENS TRANSFORMERS AUSTRIA GMBH &


CO KG

AUSTRIA- WEIZ

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

WILSON TRANSF

AUSTRALIA-MELBOURNE

Yes

Previously "AREVA-Turkey", the name has been changed to


Schneider Electric-Turkey based on Schneider Electric letter #
MKT-18.01.11 dated 18/01/2010 and AREVA T&D letter # BF/BL
25.11.2010.

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total =

1.2
1. 2. 1

29

69 KV PRIMARY
Applicable Standards:

POWER TRANSFORMERS UP TO 67 MVA


ABB

SWITZERLAND

Yes

ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ABB Bilbao

SPAIN-Bilbao

Yes

53-TMSS-01

Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.


Aug 2009, it is pre-qualified for Power Transformer up to 132kV,
100MVA as confirming to SEC specification # 53-TMSS-01, rev.0
with the following conditions:

All type, design, special & routine tests (including short


circuit test) as per SEC specifications/standards shall be carried
out on the first unit to be supplied to SEC in securing an order in
the presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.

Seven (7) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

Page 5 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

ABB Elektrik Sanayi A.S. [previously ABB ESAS]

TURKEY-Istanbul

Pre-Qualified
Manufacturers
By SEC
Yes

ABB TRANSIT OY

FINLAND

Yes

AREVA

GERMANY

Yes

BEST

TURKEY

Yes

Complete Type, Routine / Sample tests for first order & 10 Years
Warranty from the date of PAC is required.

CG Electric Systems Zrt. (previously GANZ


Transelektro Electric Co., Ltd.)

HUNGARY-Budapest

Yes

Based on TS&SD Letter 11-01981-1-03032301 dated July 11,


2011, it is pre-qualified for Power Transformers rated up to
132kV/100MVA as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following conditions:

MANUFACTURER

FACTORY LOCATION

REMARKS
Pre-Qualification & Participation for current & future SEC's
Projects subjected to the mutual agreement between SEC & ABB
dated 09 March 2009

All Type, Special & Routine tests as per SEC


Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the next unit to be supplied to SEC in an accredited Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer through their letter #
10513/10/CG dated July 04, 2011 and letter# 20338/12/CG
dated August 04, 2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 15, 2010.
Pre-Qualification & Participation for current & future SEC's
Projects subjected to the fulfillment of confirmation letter #
20342/12/CG dated August 14, 2012 by manufacturer.
CG POWER SYSTEMS

BELGIUM

Yes

DAIHEN CORPORATION

JAPAN-OSAKA

Yes

EFACEC

PORTUGAL

Yes

FUJI Electric Co.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

HYOSUNG (HICO)

KOREA, Republic of-Changwon

Yes

Page 6 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
HYUNDAI

KOREA, Republic of-Ulsan

Pre-Qualified
Manufacturers
By SEC
Yes

ILJIN Electric Co. Ltd.

SOUTH KOREA--

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

Based on S&SD Letter 12-03077-30504401 dated September 15,


2012, ILJIN ELECTRIC Co. Ltd - Korea is pre-qualified for Power
Transformers 69kV rated up to 67 MVA as conforming to SEC
Specification # 53-TMSS-01, Rev.0, with the following
conditions:
All Type, Routine and Special testes as per SEC
Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC of Power Transformers 69kV
rated up to 67MVA in The Manufacturer's Testing Laboratory in
the presence of three (3) SEC Engineers & one (1) SEC
approved Independent Inspection Agency (IIA) Inspector. All
costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer ILJIN ELECTRIC Co.
Ltd. through their letter # IJ-20120725-01 dated July 25, 2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
the manufacturer ILJIN ELECTRIC Co. Ltd. through their letter #
IJ-20120628-01 dated June 28, 2012.

JEUMONT SCHNEIDER

FRANCE

Yes

KONCAR D&ST

Croatia/Hrvatska

Yes

Based on S&SD Letter 12-02568-30504401 dated September 17,


2012, it is pre-qualified for Power Transformers rated up to
69kV, 40MVA only as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following conditions:
All Type, Special & Routine tests as per SEC
Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC in an accredited Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated 09 March 2006.

Page 7 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Liaoning - Efacec Electrical Equipment Co., Ltd
(LEEEC)

FACTORY LOCATION
CHINA-Liaoning Province

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
SUSPENDED for all SEC/National Grid SA ongoing and
forthcoming projects based on VP, Engineering letter #
13-07937-30504401 dated December 24, 2013.
The old remark before suspension was:
Based on S&SD Letter 12-01675-30504401 dated May 20, 2012.
It is prequalified for Power Transformers rated up to 67 MVA as
conforming to SEC Specification# 53-TMSS-01 with the following
condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by Liaoning - Efacec Electrical Equipment
Co., Ltd (LEEEC) through their letter # Nil dated April 18, 2012.

MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

PJSC Zaporozhtransformator (ZTR)

Ukraine-Zaporizhia

Yes

Based on S&SD letter# 13-07568-30504401 dated December


31, 2013, it is pre-qualified for Power Transformers rated up
to100 MVA, 132 kV as conforming to National Grid SA
specification # 53-TMSS-01, Rev.01, with the following
conditions:
All Type, Special & Routine tests as per latest National Grid SA
Specifications/Standards & IEC requirements together (with
Thermal & Dynamic short-circuit calculations per IEC 60076-5)
shall be carried out on the next unit to be supplied to SEC/
National Grid SA in an Accredited Testing Laboratory in the
presence of three (3) National Grid SA Engineers & one (1)
National Grid SA approved Independent Inspection Agency (IIA)
Inspector. All costs of which shall be borne by the manufacturer.
This was confirmed in writing by the manufacturer through their
letter 1/115-2261 dated August 15, 2011.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
1/115-2266 dated August 15, 2011.

Page 8 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SC ELECTROPUTERE SA

FACTORY LOCATION
Romania-Craiova

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 11-002054-1-03032300
dated10/7/2011, it is prequalified for Power Transformer up to
132kV, 100MVA, as conforming to National Grid SA specification
# 53-TMSS-01, Rev.0 with the following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery in case of direct material supply order. This was
confirmed by SC Electroputere SA through letter 27500 dated
14/06/2010.

SCHNEIDER ELECTRIC

TURKEY-Kocaeli

Yes

Previously "AREVA-Turkey", the name has been changed to


Schneider Electric-Turkey based on Schneider Electric letter #
MKT-18.01.11 dated 18/01/2010 and AREVA T&D letter # BF/BL
25.11.2010.

Siemens AG (Dresden)

GERMANY-Dresden

Yes

based on TS&SD letter# 09-01501-03032301 dated 25th May


2009 , Siemens AG from Germany-Dresden for Power
Transformer up to 230kV, 200MVA as confirming to SEC
specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with the
following conditions:

All type, special & routine tests for each voltage class as
per SEC specifications/standards shall be carried out on the first
batch to be supplied to SEC in securing an order in the presence
of three (3) SEC engineers & one (1) approved independent
inspection agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

SIEMENS AG (NURNBERG)

GERMANY-NURNBERG

Yes

SIEMENS TRANSFORMERS AUSTRIA GMBH &


CO KG

AUSTRIA- WEIZ

Yes

TAMINI

ITALY

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

WILSON TRANSF

AUSTRALIA-MELBOURNE

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total =

1.3
1. 3. 1

30

110 KV TO 132 KV PRIMARY


Applicable Standards:

POWER TRANSFORMERS UP TO 100 MVA


ABB

SWITZERLAND

Yes

ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

53-TMSS-01

Page 9 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB Bilbao

FACTORY LOCATION
SPAIN-Bilbao

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.
Aug 2009, it is pre-qualified for Power Transformer up to 132kV,
100MVA as confirming to SEC specification # 53-TMSS-01, rev.0
with the following conditions:

All type, design, special & routine tests (including short


circuit test) as per SEC specifications/standards shall be carried
out on the first unit to be supplied to SEC in securing an order in
the presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.

Seven (7) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

ABB Elektrik Sanayi A.S. [previously ABB ESAS]

TURKEY-Istanbul

Yes

ABB TRANSIT OY

FINLAND

Yes

ALSTOM Grid

TURKEY-Gebze

Yes

AREVA

GERMANY

Yes

BEST

TURKEY

Yes

Pre-Qualification & Participation for current & future SEC's


Projects subjected to the mutual agreement between SEC & ABB
dated 09 March 2009
Previously AREVA T&D-Turkey [The name has been changed
based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].
Complete Type, Routine / Sample tests for first order & 10 Years
Warranty from the date of PAC is required.

Page 10 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
CG Electric Systems Zrt. (previously GANZ
Transelektro Electric Co., Ltd.)

FACTORY LOCATION
HUNGARY-Budapest

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD Letter 11-01981-1-03032301 dated July 11,
2011, it is pre-qualified for Power Transformers rated up to
132kV/100MVA as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following conditions:
All Type, Special & Routine tests as per SEC
Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the next unit to be supplied to SEC in an accredited Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer through their letter #
10513/10/CG dated July 04, 2011 and letter# 20338/12/CG
dated August 04, 2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 15, 2010.
Pre-Qualification & Participation for current & future SEC's
Projects subjected to the fulfillment of confirmation letter #
20342/12/CG dated August 14, 2012 by manufacturer.

CG POWER SYSTEMS

BELGIUM

Yes

CROMPTON GREAVES

INDIA

Yes

DAIHEN CORPORATION

JAPAN-OSAKA

Yes

EFACEC

PORTUGAL

Yes

FUJI Electric Co.

JAPAN--

Yes

HAWKER SIDDELEY

United Kingdom

Yes

HITACHI Ltd.

JAPAN--

Yes

HYOSUNG (HICO)

KOREA, Republic of-Changwon

Yes

HYUNDAI

KOREA, Republic of-Ulsan

Yes

SUSPENDED FOR SEC 2005 PROJECTS AND ONWARD.

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

Page 11 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Hyundai Heavy Industries Co. Bulgaria

FACTORY LOCATION
Bulgaria-Sofia

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 11-00438-03-03032301 dated
15/05/2011, it is prequalified for Power Transformers up to
132kV, 100MVA as confirming to SEC specification #
53-TMSS-01, Rev.0 with the following conditions:
All type, special, routine and sample tests as per SEC
specifications/standards
for Power Transformers up to 132kV, 100MVA shall be carried
out in case of contract award or SEC direct purchase order at
SEC approved independent laboratory or at manufacturers
testing laboratory in presence of three (3) SEC Engineers and
one (1) SEC approved independent inspection agency. All the
related costs for witnessing of the tests will be borne by the
manufacturer. This was confirmed by HHIBulgaria through
letter # D-0353 dated 20/08/2010.
Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed by
HHIBulgaria through letter # D-0355 dated 20/08/2010.

ILJIN Electric Co. Ltd.

SOUTH KOREA--

Yes

Based on S&SD Letter 12-03077-30504401 dated September 15,


2012, ILJIN ELECTRIC Co. Ltd - Korea is pre-qualified for Power
Transformers 110kV to 132kV rated up to 100MVA as
conforming to SEC Specification # 53-TMSS-01, Rev.0, with the
following conditions:
All Type, Routine and Special testes as per SEC
Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC of Power Transformers with
voltage class of 110kV or 115kV or 132kV rated up to 100MVA in
The Manufacturer's Testing Laboratory in the presence of three
(3) SEC Engineers & one (1) SEC approved Independent
Inspection Agency (IIA) Inspector. All costs of which shall be
borne by the manufacturer. This was confirmed in writing by the
manufacturer ILJIN ELECTRIC Co. Ltd. through their letter #
IJ-20120725-01 dated July 25, 2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
the manufacturer ILJIN ELECTRIC Co. Ltd. through their letter #
IJ-20120628-01 dated June 28, 2012.

JEUMONT SCHNEIDER

FRANCE

Yes

Page 12 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
KONCAR D&ST

FACTORY LOCATION
Croatia/Hrvatska

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 12-02568-30504401 dated September 17,
2012, it is pre-qualified for Power Transformers rated up to
110kV to 132kV, 40MVA only as conforming to SEC Specification
# 53-TMSS-01, Rev.0, with the following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project. This was confirmed in writing by the
manufacturer through their letter # Nil dated 09 March 2006.

Liaoning - Efacec Electrical Equipment Co., Ltd


(LEEEC)

CHINA-Liaoning Province

Yes

SUSPENDED for all SEC/National Grid SA ongoing and


forthcoming projects based on VP, Engineering letter #
13-07937-30504401 dated December 24, 2013.
The old remark before suspension was:
Based on S&SD Letter 12-01675-30504401 dated May 20, 2012.
It is prequalified for Power Transformers rated up to 100 MVA as
conforming to SEC Specification# 53-TMSS-01 with the following
condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by Liaoning - Efacec Electrical Equipment
Co., Ltd (LEEEC) through their letter # Nil dated April 18, 2012.

MITSUBISHI

JAPAN--

Yes

NISSIN ELECTRIC

JAPAN

Yes

PJSC Zaporozhtransformator (ZTR)

Ukraine-Zaporizhia

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Based on S&SD letter# 13-07568-30504401 dated December


31, 2013, it is pre-qualified for Power Transformers rated up to
100MVA, 132 kV as conforming to National Grid SA specification
# 53-TMSS-01, Rev.01, with the following conditions:
All Type, Special & Routine tests as per latest National Grid SA
Specifications/Standards & IEC requirements together (with
Thermal & Dynamic short-circuit calculations per IEC 60076-5)
shall be carried out on the next unit to be supplied to SEC/
National Grid SA in an Accredited Testing Laboratory in the
presence of three (3) National Grid SA Engineers & one (1)
National Grid SA approved Independent Inspection Agency (IIA)
Inspector. All costs of which shall be borne by the manufacturer.
This was confirmed in writing by the manufacturer through their
letter 1/115-2261 dated August 15, 2011.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
1/115-2266 dated August 15, 2011.

Page 13 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SC ELECTROPUTERE SA

FACTORY LOCATION
Romania-Craiova

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 11-002054-1-03032300
dated10/7/2011, it is prequalified for Power Transformer up to
132kV, 100MVA, as conforming to National Grid SA specification
# 53-TMSS-01, Rev.0 with the following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery in case of direct material supply order. This was
confirmed by SC Electroputere SA through letter 27500 dated
14/06/2010.

Siemens AG (Dresden)

GERMANY-Dresden

Yes

SIEMENS AG (NURNBERG)

GERMANY-NURNBERG

Yes

SIEMENS TRANSFORMERS AUSTRIA GMBH &


CO KG

AUSTRIA- WEIZ

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

WILSON TRANSF

AUSTRALIA-MELBOURNE

Yes

based on TS&SD letter# 09-01501-03032301 dated 25th May


2009 , Siemens AG from Germany-Dresden for Power
Transformer up to 230kV, 200MVA as confirming to SEC
specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with the
following conditions:

All type, special & routine tests for each voltage class as
per SEC specifications/standards shall be carried out on the first
batch to be supplied to SEC in securing an order in the presence
of three (3) SEC engineers & one (1) approved independent
inspection agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total =

1.4
1. 4. 1

33

230 KV PRIMARY
Applicable Standards:

POWER TRANSFORMERS UP TO 400 MVA


ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

53-TMSS-02

Page 14 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB Cordoba

FACTORY LOCATION
SPAIN-Cordoba

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter# 09-F011657/03-03032301 dated
August 16, 2009. It is pre-qualified for Power Transformer up to
380kV, 500MVA as confirming to SEC specification #
53-TMSS-02, rev.0 with the following conditions:
All type, design, special (exclude Short-Circuit Test) & routine
tests as per SEC Specifications/Standards together with Thermal
& Dynamic short-circuit calculations per IEC 60076-5 shall be
carried out on the first unit to be supplied to SEC in an
accredited Independent Testing Laboratory or in the
manufacturer's testing laboratory in the presence of three (3)
SEC Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # PPTR-002.2 dated February
14, 2009 and the submitted "Confirmation Letter" # Nil dated
November 18, 2008. [this condition has been modified based on
S&SD letter# 12-0395-01-30504001 dated February 12, 2012]
Seven (7) years extended warranty from the date of PAC of
the First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their
submitted "Guarantee/Warranty Certificate" # Nil dated May 25,
2009.

ALSTOM Grid

TURKEY-Gebze

Yes

AREVA

GERMANY

Yes

CG POWER SYSTEMS

BELGIUM

Yes

DAIHEN CORPORATION

JAPAN-OSAKA

Yes

FUJI Electric Co.

JAPAN--

Yes

HAWKER SIDDELEY

United Kingdom

Yes

HITACHI Ltd.

JAPAN--

Yes

Previously AREVA T&D-Turkey [The name has been changed


based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

Page 15 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

HYOSUNG (HICO)

KOREA, Republic of-Changwon

Pre-Qualified
Manufacturers
By SEC
Yes

HYUNDAI

KOREA, Republic of-Ulsan

Yes

ILJIN Electric Co. Ltd.

SOUTH KOREA--

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS
Based on TS&SD fax#09-F01255/02-03032301 dated 25th. July
2009, it is pre-qualified for Power Transformer up to 380kV,
500MVA as confirming to SEC specification # 53-TMSS-02, rev.0
with the following conditions:

All type, design, special & routine tests as per SEC


specifications/standards shall be carried out on the first batch to
be supplied to SEC in securing an order in the presence of three
(3) SEC engineers & one (1) approved independent inspection
agency Inspector.

Seven (7) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.
Based on S&SD Letter 12-03077-30504401 dated September 15,
2012, ILJIN ELECTRIC Co. Ltd - Korea is pre-qualified for Power
Transformers 230kV rated up to 166.7MVA only as conforming
to SEC Specification # 53-TMSS-02, Rev.0, with the following
conditions:
All Type, Routine and Special testes as per SEC
Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC of Power Transformers
230kV rated up to 166.7MVA only in The Manufacturer's Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer ILJIN ELECTRIC Co.
Ltd. through their letter # IJ-20120725-01 dated July 25, 2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
the manufacturer ILJIN ELECTRIC Co. Ltd. through their letter #
IJ-20120628-01 dated June 28, 2012.

MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Page 16 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

Siemens AG (Dresden)

GERMANY-Dresden

Pre-Qualified
Manufacturers
By SEC
Yes

SIEMENS AG (NURNBERG)

GERMANY-NURNBERG

Yes

SIEMENS TRANSFORMERS AUSTRIA GMBH &


CO KG

AUSTRIA- WEIZ

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

WILSON TRANSF

AUSTRALIA-MELBOURNE

Yes

UP TO 100 MVA ONLY

MANUFACTURER

FACTORY LOCATION

REMARKS
based on TS&SD letter# 09-01501-03032301 dated 25th May
2009 , Siemens AG from Germany-Dresden for Power
Transformer up to 230kV, 200MVA as confirming to SEC
specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with the
following conditions:

All type, special & routine tests for each voltage class as
per SEC specifications/standards shall be carried out on the first
batch to be supplied to SEC in securing an order in the presence
of three (3) SEC engineers & one (1) approved independent
inspection agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

Total =

1.5
1. 5. 1

19

380KV PRIMARY
Applicable Standards:

POWER TRANSFORMERS UP TO 500 MVA


ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

53-TMSS-02

Page 17 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB Cordoba

FACTORY LOCATION
SPAIN-Cordoba

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter# 09-F011657/03-03032301 dated
August 16, 2009. It is pre-qualified for Power Transformer up to
380kV, 500MVA as confirming to SEC specification #
53-TMSS-02, rev.0 with the following conditions:
All type, design, special (exclude Short-Circuit Test) & routine
tests as per SEC Specifications/Standards together with Thermal
& Dynamic short-circuit calculations per IEC 60076-5 shall be
carried out on the first unit to be supplied to SEC in an
accredited Independent Testing Laboratory or in the
manufacturer's testing laboratory in the presence of three (3)
SEC Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # PPTR-002.2 dated February
14, 2009 and the submitted "Confirmation Letter" # Nil dated
November 18, 2008. [this condition has been modified based on
S&SD letter# 12-0395-01-30504001 dated February 12, 2012]
Seven (7) years extended warranty from the date of PAC of
the First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their
submitted "Guarantee/Warranty Certificate" # Nil dated May 25,
2009.

ALSTOM Grid

TURKEY-Gebze

Yes

First Unit to be Type Tested in the presence of 3 SEC Engineers


& 1 SEC approved Independent Inspector; Extended Warranty of
Six years.
Previously AREVA T&D-Turkey [The name has been changed
based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].

AREVA

GERMANY

Yes

CG POWER SYSTEMS

BELGIUM

Yes

FUJI Electric Co.

JAPAN--

Yes

HAWKER SIDDELEY

United Kingdom

Yes

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

Page 18 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

HYOSUNG (HICO)

KOREA, Republic of-Changwon

Pre-Qualified
Manufacturers
By SEC
Yes

HYUNDAI

KOREA, Republic of-Ulsan

Yes

MITSUBISHI

JAPAN--

Yes

SIEMENS AG (NURNBERG)

GERMANY-NURNBERG

Yes

SIEMENS TRANSFORMERS AUSTRIA GMBH &


CO KG

AUSTRIA- WEIZ

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS
Based on TS&SD fax#09-F01255/02-03032301 dated 25th. July
2009, it is pre-qualified for Power Transformer up to 380kV,
500MVA as confirming to SEC specification # 53-TMSS-02, rev.0
with the following conditions:

All type, design, special & routine tests as per SEC


specifications/standards shall be carried out on the first batch to
be supplied to SEC in securing an order in the presence of three
(3) SEC engineers & one (1) approved independent inspection
agency Inspector.

Seven (7) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.
ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.


Total =

2
2.1
2. 1. 1

15

PAD MOUNTED DISTRIBUTION TRANSFORMERS

13.8 KV, 33KV & 34.5 KV PRIMARY


DIST. TRANSFORMERS UP TO 2 MVA

Applicable Standards:

ABB

Saudi Arabia-RIYADH

Yes

ALFANAR ELECTRICAL SYSTEMS

Saudi Arabia-RIYADH

Yes

51-TMSS-01

Based on TS&SD letter # 11-03272-03032301 dated


16/11/2011, it is prequalified for Station Service Transformer up
to 1.5MVA only as conforming to SEC/National Grid SA
specification # 51-TMSS-01, Rev.0 with the following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or from the date
of first delivery of direct material supply order. This was
confirmed by ALFANAR Electrical Systems (AES)Riyadh through
letter # Nil dated 09/04/2011.

FEDERAL TRANSFORMERS CO.

United Arab Emirates-ABU DHABI Yes

UP TO 1.5 MVA

KONCAR D&ST

Croatia/Hrvatska

UP TO 2.5 MVA. Complete Type, Routine / Sample tests for first


order & 10 Years Warranty from the date of PAC is required.

Yes

Page 19 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Saudi Federal Transformers L.L.C.

FACTORY LOCATION
Saudi Arabia-Riyadh

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letters# 12-01572-2-30504401 dated May 27,
2012 & 13-06464-1-30504401 dated December 11, 2013, it is
pre-qualified for Power Transformers rated up to 36KV & 2MVA
as confirming to SEC Specification # 51-TMSS-01, Rev.0, with
the following condition:
Ten (10) years extended warranty in respect of defects due to
design , manufacturing, installation and workmanship from the
date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material supply
order as confirmed through Saudi Federal Transformers L.L.C.,
Riyadh letter # SFTL/TES/545/2012 dated May 05, 2012.

SAUDI TRANSFORMERS CO.

Saudi Arabia-DAMMAM

Yes

United Transformers Electric Co. (UTEC)

Saudi Arabia-Riyadh

Yes

WESCOSA

Saudi Arabia-DAMMAM

Yes

UP TO 13.8 KV ONLY

UP TO 13.8 KV ONLY
Total =

3
3.1
3. 1. 1

PAD MOUNTED GROUNDING TRANSFORMERS UP TO 2 MVA

13.8 KV, 33KV & 34.5 KV PRIMARY


Applicable Standards:

GROUNDING TRANSFORMERS
*

---

Yes

ABB

United States

Yes

ABB

Saudi Arabia-RIYADH

Yes

ABB ( T& D)

ITALY

Yes

ABB SECHERON

SWITZERLAND-GENEVA

Yes

CG POWER SYSTEMS

BELGIUM

Yes

CROMPTON GREAVES

INDIA

Yes

HYOSUNG (HICO)

KOREA, Republic of-Changwon

Yes

HYUNDAI

KOREA, Republic of-Ulsan

Yes

52-TMSS-01
ALL APPROVED POWER TRANSFOREMER MANUFACTURERS,
EXCEPT DISTRIBUTION TRANSFORMER MANUFACTURERS ARE
ALSO ACCEPTABLE FOR GROUNDING TRANSFORMERS

SUSPENDED FOR SEC 2005 PROJECTS AND ONWARD

Total =

4
4.1

DRY TYPE TRANSFORMERS

36 KV PRIMARY

Page 20 of 190

SER
4. 1. 0

5
5.1
5. 1. 1

5.2
5. 2. 1

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

6.1
6. 1. 1

Pre-Qualified
Manufacturers
By SEC

REMARKS

Applicable Standards:

36 KV PRIMARY
ABB/AEIL

Saudi Arabia

Yes

SIEMENS

GERMANY

Yes

WESCOSA

Saudi Arabia-DAMMAM

Yes
Total =

Total =

Total =

COMPACT SUBSTATION

69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY


Applicable Standards:

UNIT SUBSTATION, 69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY


ABB (BBC SECHERON)

SWITZERLAND-GENEVA

Yes

CG POWER SYSTEMS

BELGIUM

Yes

110-132 KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY


Applicable Standards:

UNIT SUBSTATION, 110 - 132 KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY


ABB ( T& D)

FACTORY LOCATION

United States-N/A

Yes

REACTOR

OIL IMMERSED REACTORS


Applicable Standards:

33 KV TO 69 KV OIL IMMERSED REACTORS


ABB

SWEDEN

Yes

ALSTOM Grid

TURKEY-Gebze

Yes

AREVA_(ST. QUEN)

FRANCE-(ST. QUEN)

Yes

FUJI Electric Co.

JAPAN--

Yes

58-TMSS-01

Previously AREVA T&D-Turkey [The name has been changed


based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].
Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

Page 21 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

HITACHI Ltd.

JAPAN--

Pre-Qualified
Manufacturers
By SEC
Yes

HYUNDAI

KOREA, Republic of-Ulsan

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS
Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
Based on TS&SD Letters # 10-02438-02-03032301 dated August
31,2010 and 13-05782-1-30504401 December 11, 2013, it is
pre-qualified for Shunt Reactor as conforming to National Grid
SA specification # 58-TMSS-01, Rev.0 with the following
condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or from the date
of first delivery of direct material supply order and subsequently
reduced yearly in case of future project award. This was
confirmed by HHI Korea through letter # S370-1008-0182
dated 18/08/2010.

MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

PJSC Zaporozhtransformator (ZTR)

Ukraine-Zaporizhia

Yes

Based on S&SD letter# 13-07568-30504401 dated December


31, 2013, it is pre-qualified for Shunt Reactors rated up to 132
kV as conforming to National Grid SA specification #
58-TMSS-01, Rev.0, with the following conditions:
All Type, Special & Routine tests as per latest National Grid SA
Specifications/Standards & IEC requirements shall be carried out
on the first/next unit to be supplied to SEC/National Grid SA in
an Accredited Testing Laboratory in the presence of three (3)
National Grid SA Engineers & one (1) National Grid SA approved
Independent Inspection Agency (IIA) Inspector. All costs of
which shall be borne by the manufacturer. This was confirmed in
writing by the manufacturer through their letter 1/115-3553
dated December 14, 2011.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
1/115-3552 dated December 14, 2011.

SCHNEIDER ELECTRIC

TURKEY-Kocaeli

Yes

SIEMENS AG (NURNBERG)

GERMANY-NURNBERG

Yes

SIEMENS TRANSFORMERS AUSTRIA GMBH &


CO KG

AUSTRIA- WEIZ

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

Based on S&SD Letter 12-03420-30504401 dated October 02,


2012, Schneider Electric from Turkey-Kocaeli is pre-qualified for
Shunt Reactors up to 33kV only.

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.


Total =

12

Page 22 of 190

SER
6. 1. 2

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

Applicable Standards:

110 KV TO 132 KV REACTORS

REMARKS

58-TMSS-01

ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ALSTOM Grid

TURKEY-Gebze

Yes

AREVA_(ST. QUEN)

FRANCE-(ST. QUEN)

Yes

FUJI Electric Co.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

HYUNDAI

KOREA, Republic of-Ulsan

Yes

Based on TS&SD Letters # 10-02438-02-03032301 dated August


31,2010 and 13-05782-1-30504401 December 11, 2013, it is
pre-qualified for Shunt Reactor as conforming to National Grid
SA specification # 58-TMSS-01, Rev.0 with the following
condition:

Previously AREVA T&D-Turkey [The name has been changed


based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or from the date
of first delivery of direct material supply order and subsequently
reduced yearly in case of future project award. This was
confirmed by HHI Korea through letter # S370-1008-0182
dated 18/08/2010.
MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Page 23 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
PJSC Zaporozhtransformator (ZTR)

FACTORY LOCATION
Ukraine-Zaporizhia

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter# 13-07568-30504401 dated December
31, 2013, it is pre-qualified for Shunt Reactors rated up to 132kV
as conforming to National Grid SA specification # 58-TMSS-01,
Rev.0, with the following conditions:
All Type, Special & Routine tests as per latest National Grid SA
Specifications/Standards & IEC requirements shall be carried out
on the first/next unit to be supplied to SEC/National Grid SA in
an Accredited Testing Laboratory in the presence of three (3)
National Grid SA Engineers & one (1) National Grid SA approved
Independent Inspection Agency (IIA) Inspector. All costs of
which shall be borne by the manufacturer. This was confirmed in
writing by the manufacturer through their letter 1/115-3553
dated December 14, 2011.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
1/115-3552 dated December 14, 2011.

SIEMENS AG (NURNBERG)

GERMANY-NURNBERG

Yes

SIEMENS TRANSFORMERS AUSTRIA GMBH &


CO KG

AUSTRIA- WEIZ

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.


Total =

6. 1. 3

Applicable Standards:

230 KV OIL IMMERSED REACTORS

12

58-TMSS-01

ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ALSTOM Grid

TURKEY-Gebze

Yes

AREVA_(ST. QUEN)

FRANCE-(ST. QUEN)

Yes

FUJI Electric Co.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

Previously AREVA T&D-Turkey [The name has been changed


based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].

Page 24 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
HYUNDAI

FACTORY LOCATION
KOREA, Republic of-Ulsan

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD Letters # 10-02438-02-03032301 dated August
31,2010 and 13-05782-1-30504401 December 11, 2013, it is
pre-qualified for Shunt Reactor as conforming to National Grid
SA specification # 58-TMSS-01, Rev.0 with the following
condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or from the date
of first delivery of direct material supply order and subsequently
reduced yearly in case of future project award. This was
confirmed by HHI Korea through letter # S370-1008-0182
dated 18/08/2010.

MITSUBISHI

JAPAN--

Yes

SIEMENS AG (NURNBERG)

GERMANY-NURNBERG

Yes

SIEMENS TRANSFORMERS AUSTRIA GMBH &


CO KG

AUSTRIA- WEIZ

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.


Total =

6. 1. 4

Applicable Standards:

380 KV OIL IMMERSED REACTORS


ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ALSTOM Grid

TURKEY-Gebze

Yes

11

58-TMSS-01

Based on S&SD letter# 13-04034-2-30504401 dated September


12, 2013, it is pre-qualified for 380 kV Oil Immersed Shunt
Reactors as conforming to National Grid SA specification #
58-TMSS-01, Rev.0, with the following conditions:
All type/special, routine tests for 380 kV Oil Immersed Shunt
Reactors on one unit of each rating supplied to SEC shall be
conducted at Manufacturer's Testing Laboratory in presence of
three (3) SEC/National Grid SA engineers & one (1) SEC
approved independent inspection agency Inspector, all the
related costs for witnessing the tests will be borne by the
manufacturer. This was confirmed by Alstom Grid, Turkey
through their letter # Nil dated July 22, 2013.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed by Alstom Grid, Turkey through their letter # Nil dated
July 22, 2013.

AREVA_(ST. QUEN)

FRANCE-(ST. QUEN)

Yes

Page 25 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

FUJI Electric Co.

JAPAN--

Pre-Qualified
Manufacturers
By SEC
Yes

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

HYUNDAI

KOREA, Republic of-Ulsan

Yes

Based on TS&SD Letters # 10-02438-02-03032301 dated August


31,2010 and 13-05782-1-30504401 December 11, 2013, it is
pre-qualified for Shunt Reactor as conforming to National Grid
SA specification # 58-TMSS-01, Rev.0 with the following
condition:

MANUFACTURER

FACTORY LOCATION

REMARKS
Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or from the date
of first delivery of direct material supply order and subsequently
reduced yearly in case of future project award. This was
confirmed by HHI Korea through letter # S370-1008-0182
dated 18/08/2010.
MITSUBISHI

JAPAN--

Yes

SIEMENS AG (NURNBERG)

GERMANY-NURNBERG

Yes

SIEMENS TRANSFORMERS AUSTRIA GMBH &


CO KG

AUSTRIA- WEIZ

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.


Total =

6.2

AIR CORE SERIES REACTOR

6. 2. 1

230 KV AIR CORE SERIES REACTORS


*

Applicable Standards:
---

Yes

11

58-TMSS-02
ALL POWER TRANSFORMER AND OIL IMMERSED REACTOR
MANUFACTURERS ARE ACCEPTABLE TO SUPPLY AIR CORE
SERIES REACTORS FROM 13.8KV TO 230 KV

Page 26 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

TRENCH AUSTRIA GMBH

AUSTRIA-Leonding, Linz

Pre-Qualified
Manufacturers
By SEC
Yes

TRENCH CANADA

CANADA-Scarborough, Ontario

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS
Based on TS&SD letter 10-01317-1-03032301 dated May 10,
2010. TRENCH AUSTRIA GMBH is pre-qualified for Air Core
Series Reactors as confirming to SEC Specification 58-TMSS-02,
Rev.0 with the following conditions:
Extended Warranty: Seven (7) years Extended Warranty shall
be applicable for the Air Core Series Reactors to be supplied to
SEC by TRENCH AUSTRIA GMBH as confirmed through their
letter # NIL dated April 28, 2010.
Test Witnessing: Factory Tests on the first batch of Reactors to
be supplied to Contract # 10931162/00 and Contract #
10931163/00 for Dynamic Reactive Power Compensation
Projects in Central Operating Area shall be conducted in
presence of three (3) SEC Engineers and one (1) IIA Inspector,
under the sole expense of the Manufacturer as confirmed
through their Letter Letter # NIL dated April 28, 2010.
Based on TS&SD letter 10-01317-1-03032301 dated May 10,
2010. TRENCH CANADA is pre-qualified for Air Core Series
Reactors as confirming to SEC Specification 58-TMSS-02, Rev.0
with the following conditions:
Extended Warranty: Seven (7) years Extended Warranty shall
be applicable for the Air Core Series Reactors to be supplied to
SEC by TRENCH CANADA as confirmed through their letter # NIL
dated April 28, 2010.
Test Witnessing: Factory Tests on the first batch of Air Core
Series Reactors to be supplied to Contract # 20931030/00 for
Taif BSP & Kayber/Bawat S/S shall be conducted in presence of
three (3) SEC Engineers and one (1) IIA Inspector, under the
sole expense of the Manufacturer as confirmed through their
Letter # NIL dated April 27, 2010.
Free Replacement: TRENCH CANADA shall supply one
complete three phase set of Reactors (3 units) to SEC (Tabouk
City) free of charge as already confirmed through their letter #
NIL dated November 06, 2009.
Total =

6.3
6. 3. 1

AIR CORE REACTORS


Applicable Standards:

230 KV AIR CORE REACTORS


ALSTOM (T & D) BALTEAU SA (NV)

BELGIUM

Yes

Power Economy Middle East Co.

United Arab Emirates-Abu Dhabi

Yes

52-TMSS-02,58-TMSS-02

Limited to 34.5kV Only; First unit of 34.5kV Air Core Reactor


shall be type tested in an independent lab. in the presence of 3
SEC Engineers & 1 SEC Approved Independent Inspection
Agency; 10 years of Extended Warranty.
Total =

Page 27 of 190

SER

7
7.1
7. 1. 1

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

SWITCHGEARS

METAL CLAD SWITCHGEARS


Applicable Standards:

13.8 KV UP TO 34.5 KV
ABB ( T& D)

United States-N/A

32-TMSS-01

Yes

Page 28 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB/AEIL

FACTORY LOCATION
Saudi Arabia

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
For 33kV AIS:
classic ZS3 type with current rating up to 2500A@ 40C; CB type
VD43620-25(2000A), VD43612-25(1250A & 800A); ES type EK5,
3007N280.
For 13.8kV AIS:
The remark was modified based on S&SD Letter
13-01329-30504401 dated March 13, 2013.
13.8kV switchgear type UniGear ZS1 (CT on upper & lower
side of CB) with rated current of incomer, Bus Section, Bus Riser
3003A and 1756A, Out Going Feeder with rated current 924A
and 682A @ 40C, 60Hz, 25kA (3s).
Out Going Feeder (CT on lower side of CB) with rated current
991A and 648A @ 40C, 60Hz, 25kA (3s).
CB types (VD4 embedded pole): VD4 17.31-25 (interrupter
VG6), ABB Italy and VD4 17.16-25 (interrupter VG4/S), VD4
17.12-25 (interrupter VG4) & VD4 17.06-25 (interrupter VG4),
ABB, Italy.
Circuit breaker for Capacitor bank back to back switching
(BC2-630A); VD4 17.12-40 (interrupter VG6), HD4 17.12-25
(interrupter SF6), HD4 24.12-25 (interrupter SF6), and (BC2900A); HD4 17.16-25 (interrupter SF6) ABB, Italy.
All VD4 Poles and Interrupters are from ABB Calor Emg,
Germany (DECMS).
EL Operating Mechanism form ABB-SACE Italy (ITABB).
Earthing switch type EK6, ABB-EJF, Czech.
CT & VT: ABB-EJF, Czech or WTW make, Germany
Old version: Classic ZS1.
Based on S&SD Letter 12-03120-01-30504401 dated August 14,
2012, 13.8kV UniGear ZS1 AIS is pre-qualified for current rating
3600/4000A @ 40C, 60Hz with forced cooling, with the
following dimensions of the panels:
Incomer
(100017802595), VCB-VD4
1731-25,Interrupter-VG6
Bus section
(100017802595), VCB-VD4
1731-25,Interrupter-VG6
Bus riser
(80014002595)

ABB-CALOR EMAG

GERMANY-CALOR EMAG

Yes

Page 29 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

AEL -SIEMENS

Saudi Arabia-JEDDAH

Pre-Qualified
Manufacturers
By SEC
Yes

ALFANAR ELECTRICAL SYSTEMS

Saudi Arabia-RIYADH

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS
For 13.8kV AIS:
type 8BK20 with CB type 3AH.
for 33kV AIS:
type 8BT2 is not acceptable, as the VT is situated in a separate
compartment and connected by cable.
Based on TS&SD letter# 09-02613-01-03032301 dated 13th
September 2009, ALFANAR ELECTRICAL SYSTEMS from Saudi
Arabia-Riyadh for 13.8kV Switchgear type NES-H with degree
protection IP4X; vacuum CB (rating 3150A & 1250A) and ES
from LSIS (South Korea) - details of types are mentioned in the
TS&SD letter; as confirming to SEC specification # 32-TMSS-01,
rev.0 with the following condition:
Ten (10) years warranty from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order.
Based on S&SD Letter 11-01668-03032301 dated June 01,
2011, 13.8kV NES-H AIS is pre-qualified for current rating 4000A
@ 40C, 60Hz with forced cooling and 2906A @ 40C, 60Hz with
natural cooling with busbar dimension 3x100x10mm and with
the following dimensions of the panels:
Incomer
(100018802793),
VCB-LVB-17M-40D/301E2H, Interrupter-10403
Bus section
(100018802793),
VCB-LVB-17M-40D/301E2H, Interrupter-10403
Bus riser
(100018802793)

AREVA (MACON CEDEX 9)

FRANCE-(MACON CEDEX 9)

Yes

EFACEC

PORTUGAL

Yes

ELEKTROBUDOWA SA

Poland-Konin

Yes

based on TS&SD letter# 09-01092-03032301 dated 18th. April


2009 it is prequalified for for 13.8kV Air Insulated Switchgear
type D-17P with SCC of 25kA/3sec, degree of protection IP4X
and rated current of 3000A @ 40oC, 60Hz; CB type VD4 which
approved by SEC from ABB-Germany (3000A) & ABB-Italy
(2500A); ES type UMR from ELECTROBUDOWA SA-Poland as
confirming to SEC specification # 32-TMSS-01, rev.0 with Ten
(10) years warranty from the date of PAC of the Turnkey
project in case of contract award or date of delivery in case of
direct material supply order.

Page 30 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
EPS LTD. (GROUPE SCHNEIDER)

FACTORY LOCATION
Saudi Arabia-RIYADH

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
For 13.8kV AIS:
Pre-qualified since 24/02/1420H for 13.8kV SWG type MC-Set
with CB type LF3-3150-(2500A), LF2- 2500 (2000A), LF2-1250
(800A), LF2-630 (400A) and warranty of (7)years from
commissioning date of the first delivery for any onward project
or order in the first two years and then shall be (3)years from
PAC.
Based on S&SD Letter 12-02860-01-30504401 dated July 24,
2012, 13.8kV MC-Set AIS is pre-qualified for current rating
3600A @ 40C, 60Hz with forced cooling, with the following
dimensions of the panels:
Incomer
(90017002500), CB-LF3,
Interrupter-LF3-3150A
Bus section
(90017002500), CB-LF3,
Interrupter-LF3-3150A
Bus riser
(90017002500)
For 33kV AIS:
Based on TS&SD fax ref. #09-00073-2-03032301 dated
04/02/2009. Pre-Qualified for 34.5 kV SWG type
(F400NL)1250/2500 A @40C &60Hz with IP4X,SF6 CB type
SF2(France),ES type TFCM(France), & (10)years warranty.
Old version:
33kV AIS type F400G with current rating up to 2500A @ 40C
with CB type SF & SF2

FUJI Electric Co.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

KONCAR

Croatia/Hrvatska

Yes

LIMITED TO DTA ONLY; FOR CTA PREQUALIFICATION UNDER


PROGRESS

MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

POWER CON

United States

Yes

SWITCHGEAR NOT YET TYPE TESTED

S&C

United States

Yes

SIEMENS

United States

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

VA TECH

FRANCE

Yes

WESCOSA

Saudi Arabia-DAMMAM

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Page 31 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Total =

7. 1. 2

Applicable Standards:

110 KV TO 132 KV GIS


ABB

GERMANY

Yes

19

32-TMSS-02
Old Version:
145kV GIS type ELK-04 with CB type ELK-SW04, Hydraulic
spring mechanism; DS type ELK-TE0 (3 POS), MES type ELK-TE0
(3 POS)/ TE03-DR04; HES type ELK-EB03.
New Version:
Based on TS&SD letter # 11-00455-5-03032301 dated April 04,
2011, the new version 145kV GIS type ELK-04 with CB type
ELK-CB0 (Hydraulic Spring Mech. HMB-1), DS type
ELK-DE0-3POS, MES type ELK-DE0, HSES type ELK-ES0 (Motor
Spring Mech.) is pre-qualified as conforming to SEC specification
# 32-TMSS-02, Rev.01 with the following condition:
Ten (10) Years Extended Guarantee/Warranty from the date of
PAC of project (in case of contract award) and from date of
delivery for the direct material supply order. This was confirmed
in writing by ABB Germany via their letter # PTPH/GVS.Nb,
10_year-warranty.doc dated May 14, 2010.

ABB

SWITZERLAND

Yes

ALSTOM Grid AG

SWITZERLAND-Oberentfelden

Yes

New version:
Based on S&SD letter# 13-4433-01-30504401, dated 16 January
2013, it is pre-qualified for 145kV GIS type F35 with rated
current, 3150A @40C, 60Hz, CB type- F35-CB4 / Opr. Mech:
FK3-2 (spring charged), Line & Busbar DS-F35-DES-4/ Opr.
Mech: ME1-3, MES-F35-DES-4/ Opr. Mech: ME1-3,
HES-F35-EFZ/Opr. Mech:MF-3 (spring charged), CT-F35-CT4,
against specification # 32-TMSS-02, Rev.1 with the following
condition:
1. Eight (8) years extended warranty from the date of PAC of
the first turnkey project (in case of contract award) or from the
date of first delivery of direct material supply order. This was
confirmed through manufacturer lletter ref: Q1F35_210409
dated 21 April 2009.
Old Version:
145kV GIS type B65 with CB type B65-CB Motor spring
mechanism; DS type B65-DS; ES type B65-ES; HES type B65-EF.
Previously " Areva T &D AG, SWITZERLAND-Oberentfelden ", the
name has been changed to ALSTOM Grid AG, Oberentfelden,
Switzerland, based on ALSTOM Grid Letter # Nil dated July 11,
2012.

Page 32 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
FUJI Electric Co.

FACTORY LOCATION
JAPAN--

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
Old version:
145kV GIS type SDA5 (SDA514) with CB type BAK5, Hydraulic
mechanism.

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
New version: 145kV GIS type CFTA with CB type CFPT-120-40L,
FAR3 Motor spring mechanism; DS type CFL-120; ES type
CFL-120.
Old version: 145kV GIS type CFT with CB type CFPT-140-40L,
FAR3,C Pneumatic mechanism; DS type SFL-EA; HES type
SFGM-FA.

HYOSUNG (HICO)

KOREA, Republic of-Changwon

Yes

New Model approved on 10-04-2007, Model Type HSG-144A


145KV GIS with CB type HCSP-144A
Motor spring mechanism; DS type HDMO-144A; MES type
HDMO-144A, HES type HEMS-144A.
All Type and Design tests have been carried out completely &
accepted as mentioned in TS&SD letter#08-F02926-03032301
dated 22/11/2008.
Provide extended Guarantee/Warranty for Seven(7) Years from
the date of PAC
Old version: 145kV GIS type 145HGS40 with CB type
145HCB,145PL40; DS type 145SDSV/SDSH; MES type 145SESM;
HES type 145SESA

HYUNDAI

KOREA, Republic of-Ulsan

Yes

New version: 145kV GIS type 145SP-1 with CB type 145SP-K1


Motor spring mechanism; BDS type 145SP-3PS1; LDS type
145SP-3PS2; MES type 145-3PS2; HES type 145SP-LES2.
Old version: 145kV GIS type 145SP with CB type 145SP-K
Hydraulic mechanism; DS type 145SP-DS; MES type 145SP-ES;
HES type 145SP-LES

KONCAR

Croatia/Hrvatska

Yes

GIS & ADAPTORS; LIMITED TO DTA ONLY; FOR CTA


PREQUALIFICATION UNDER PROGRESS

Page 33 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
LS Industrial System Co.

FACTORY LOCATION
SOUTH KOREA-Cheongju

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter# 13-07921-2-30504401 dated January 06,
2014,it is pre-qualified for 145kV GIS type GESG-1440NHS with
rated current, 3150A, 60Hz, CB type- GEDB-1440NHS / Opr.
Mech. Type: GGA204155 (spring charged), LDS type- GESG
1440-ACSF/ Opr. Mech: Motor, BDS type-GESG 1440-ACSB /
Opr. Mech: Motor, MES type- GESG 1440-ACSB/ Opr. Mech:
Motor, HES type- GESG 1440-MSES /Opr. Mech: Motor spring &
CT- JK GIS, against specification # 32-TMSS-02, Rev.1 with the
following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated November 25, 2013.

MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.


New version 145kV GIS type 100GMKD with CB type
120-SFMT-40CJ; DS type 120GRD/GLD; MES type
120GRED/GRE; HES type 120 GRED/GRE-A.
Old version: 145kV GIS 120GMKM with CB type 120-SFMT-40,
Pneumatic mechanism; DS type 120-GR-20,
120-GL-20; MES type 120-GRE, 120-GREC; HES type 120-GREA.
Old version: 145kV GIS 100GMKD with CB type 120-SFMT-40CE
Motor spring mechanism; DS type 120GLD; HES type 120-GREA.

SIEMENS

FRANCE-GRENOBLE

Yes

New version:
145kV GIS type TH7m with CB type TH7m AF8ER(Motor spring);
BDS type CM002, CM003 (3-position); LDS type CM002, CM003
(2-position); MES type CM002,CM003; HES type CM002, CM003.
Old version: 145kV GIS type HEXABOLIC-TH7 with CB type
DTH7 Hydraulic mechanism; BDS type SITH7; LDS type ITH7, SI
TH7; ES type ST TH7.

SIEMENS

GERMANY

Yes

New version: 145kV GIS type 8DN8-II with CB type 8DN8 Motor
spring mechanism; DS type 8DN8; ES type 8DN8.
Old version: 145kV GIS type 8DN8 with CB type 8DN6(P1) Motor
spring mechanism; DS type 8DN8; ES type 8DN8.

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.


145kV GIS type with CB type GSPK-145AP; BDS type
KTM-120PW, DTM-120PW, DLM-120PW; LDS type KTM-120PW,
DTM-120PW; MES type EBM-120W; HES type EAP-120W.
Total =

7. 1. 3

230 KV -GIS

Applicable Standards:

13

32-TMSS-02

Page 34 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB

FACTORY LOCATION
SWITZERLAND

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter # 14-00064-30504101 dated January 26,
2014 and ABB Letter # PPHV-300GIS CH-05 dated February 02,
2014, the designation has been corrected to the following:
230 kV GIS Type: ELK-14/300 (1HC0071250M0040), Rated
current: 4000A, 40C, @ 60Hz, CB Type: ELK-SP14/300
(1HC0071250M0040) / Opr. Mech: HMB4 (1HC0071250M0040),
LDS & BDS Type: ELK-TK14/300 (1HC0071250M0040) / Opr.
Mech: BAC (1HC0071250M0040), MES Type: ELK-TK14/300
(1HC0071250M0040) / Opr. Mech: BAC (1HC0071250M0040),
HES Type: ELK-EB14/300 (1HC0071250M0040) / Opr. Mech:
BAE (1HC0071250M0040), CT Type: ELK-CN14/300
(1HC0071250M0040), Cable compartment Type: ELK-HK 14/300
(1HC0071250M0040).
Capacitor Bank Back to Back switching type test will be
performed when required in the project, confirmed by ABB letter
# PPHV-140120/GIS-1, dated 21-01-2014.
Old Designation:
230kV GIS Type: ELK-1, CB Type: ELK SP2-1.

ALSTOM Grid SAS

FRANCE-AIX-LES BAINS

Yes

SUSPENDED for all SEC/National Grid SA ongoing and


forthcoming projects based on VP, Engineering letter #
14-02361-1-30504401, dated March 26, 2014.
The old remark before suspension was:
230kV GIS type B105 with CB type B105-CB; DS type CLT
Previously "AREVA T&D FRANCE-(AIX-LES BAINS) ", the name
has been changed to ALSTOM Grid SAS-France based on
ALSTOM Grid-France letter # Nil, dated December 07, 2012.

FUJI Electric Co.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
230kV GIS type MFPT MFPTB-300-63L with CB type
MFPTB-300-63LA, HAR/MFTB-300-563L; BDS type FL-EA, LDS
type FMG-FA/FG.

MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Page 35 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SIEMENS

FACTORY LOCATION
GERMANY-Berlin

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter # 13-05708-1-30504401, dated October
10, 2013, it is pre-qualified for 245kV GIS type 8DN9 with rated
current, 3150A @40C, 60Hz, CB type- 8DN9-245kV-50kA/Opr.
Mech: spring charged, Line & Busbar DS-8DN9-245kV-50kA/Opr.
Mech: Motor, MES-8DN9-245kV-50kA/Opr. Mech: Motor,
HES-8DN9-245kV-50kA/Opr. Mech: spring charged, as
conforming to National Grid SA specification # 32-TMSS-02,
Rev.01, with the following conditions:
CB capability for Capacitor bank back to back switching
(BC1/BC2) is applicable for 145kV only.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by SIEMENS, Germany-Berlin through their
letter # Nil dated June 19, 2010.

SIEMENS

GERMANY-Berlin

Yes

Old Version

230kV GIS type 8DN40-8DN4 with CB 8DN401-8DN4; BDS


type 8DN4-8DQ1; LDS type 8DP4; MES type 8DN4; HES type
8DP4.

Based on SIEMENS letter# 30179023-A1 dated


02/05/2011, this type is already obsolete/phased out.
New Version
Based on TS&SD letter # 11-00267/01-03032301 dated
02/02/2011, it is pre-qualified for 300kV GIS type 8DN9, rated
current 4000A, short time current rating of 63kA, CB (Single
Break) type 8DN9-300-63-4000 with motor spring mechanism,
Busbar & line DS type 8DN9-300-63-4000 with motor drive
mechanism, MES type 8DN9-300-63-with motor drive
mechanism & HES type 8DN9-300-63-4000 with motor drive
mechanism as confirming to SEC specification #
32-TMSS-02,Rev.01, with the following conditions:

Ten (10) years extended warranty starting from project


"Safaniyah 380/230kV project" as confirmed through SIEMENS
letter # PQ_8DN9_02 dated 26/06/2010.

SIEMENS

FRANCE-GRENOBLE

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

This GIS shall only be used for 245kV, 63kA applications.

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.


Total =

7. 1. 4

380 KV - GIS

Applicable Standards:

32-TMSS-02

Page 36 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB

FACTORY LOCATION
SWITZERLAND

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter # 13-00748-30504101 dated November
06, 2013, it is pre-qualified for 380 kV GIS type ELK-3/420
(1HC0071250M0070) @ 4000A, 60Hz, CB type ELK-SP3/420,
Operating Mechanism-HMB8, Line & Busbar DS type
ELK-TK3/420, Operating Mechanism-ELK-BAC, MES type
ELK-TK3/420, Operating Mechanism-ELK-BAC, HES type
ELK-EB3 420, Operating Mechanism-ELK-BAE, CT type ELK-CN3,
Cable compartment type ELK-HK3 with following condition:
For CB, Capacitor bank back to back current switching
capability, the type test shall be performed when required for
the project as confirmed by ABB vide their letter # PPHV130701/GlS-1 , date July 01, 2013.

ALSTOM Grid SAS

FRANCE-AIX-LES BAINS

Yes

SUSPENDED for all SEC/National Grid SA ongoing and


forthcoming projects based on VP, Engineering letter #
14-02361-1-30504401, dated March 26, 2014.
The old remark before suspension was:
420kV GIS type T155 with CB type FB2T (Hydraulic Mech.)
Previously "AREVA T&D FRANCE-(AIX-LES BAINS) ", the name
has been changed to ALSTOM Grid SAS-France based on
ALSTOM Grid-France letter # Nil, dated December 07, 2012.

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
420kV GIS type 1FT

Page 37 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
HYOSUNG (HICO)

FACTORY LOCATION
KOREA, Republic of-Changwon

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 10-F-02299/02-03032301 dated
25/10/2010, it is pre-qualified for 420kV GIS type HSG 426A,
63kA, CB (Single Break) type HCHY 426A with Hydraulic
Mechanism, Busbar DS type HDMO 426A, Line DS type HDMO
426B,ES type HEMO 426A&H-ES type HEMS 426A as
confirming to SEC specification # 32-TMSS-02,Rev.01, with the
following conditions:

Supply one complete spare bay" free of charge" (for not


repeating the short circuit test of circuit breaker type HCHY
426A) on the first supply of 420kV GIS type HSG 426A to SEC.
This was confirmed in writing by Hyosung Corp (Korea) through
letter #Nil dated 28th December 2009.

Repeat/carry out the temperature rise test at 55C (it was


carried out before at 50C) of the main circuit on the first supply
of the 420kV GIS type HSG 426A to SEC. This was confirmed in
writing by Hyosung Corp (Korea) through letter #HS-420GIS100830-1 dated 30th August 2010.

Back to back switching tests for the capacitor bank shall be


conducted in an independent test laboratory whenever there is
project requirement. This was confirmed in writing by Hyosung
Corp (Korea) through letter #HS-420GIS-100830-1 dated 30th
August 2010.

Ten (10) years extended warranty for the proposed 420kV


GIS type HSG 426A from the date of PAC of the turnkey project
in case of contract award or date of delivery in case of direct
material supply order. This was confirmed in writing by Hyosung
Corp (Korea) through letter #HS-420GIS-100830-1 dated 30th
August 2010.

HYUNDAI

KOREA, Republic of-Ulsan

Yes

420 kV; 63kA; TYPE-550 SR; CB-550 SR-K (Single Break);


DS-550 DRM 1&2; ES-550 ERM; HES-550 LES; back to back
capacitor switching test for C.B. shall be done in independent
laboratory iin the presence of SEC Engineers whenever there is a
requirment for this test iin th PTS of forthcoming SEC projects.
- 10 Years extended warranty.

MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

SIEMENS

FRANCE-GRENOBLE

Yes

420kV GIS type YGII with CB type SPD; DS ype YGII

SIEMENS

United Kingdom-HEBBUM

Yes

Page 38 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
SIEMENS

GERMANY

Pre-Qualified
Manufacturers
By SEC
Yes

Siemens AG

GERMANY-Berlin

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS
New version: 550kV GIS typ 8DQ1 with CB type 8dQ1-P2; DS
type 8DQ1; ES type 8DQ1. with ten (10) years extended
warranty from the date of Provisional Acceptance Certificate
(PAC) of the Turnkey project (In case of contract award) and
from the date of delivery for the direct material supply order.
The guarantee/warranty shall cover all the cost of materials and
labor as per warranty/guarantee of materials and workmanship
and subsequently reduced yearly in case of future project award.
old version: 420kV GIS type 8DQ1 with CB type 8DQ1-T2,
DOUBLE BREAK, Hydraulic mechanism; DS type 8QD1
Based on S&SD letter# 14-00569-2-30504401 dated February
09, 2014,it is pre-qualified for 420KV GIS, type 8DQ1-6, 63KA,
Single Break with rated current 4000A, 60Hz, CB type-8DQ1
6-P1 (Single break)/ Opr. Mech. Type: Spring type (FA5), LDS
type- 8DQ1 6 DS / Opr. Mech: Motor, BDS type-8DQ1 6 DS /
Opr. Mech: Motor, MES type- 8DQ1 6 ES / Opr. Mech: Motor,
HES type- 8DQ1 6 HSES /Opr. Mech: Motor spring & CT- 8DQ1 6
against specification # 32-TMSS-02, Rev.1 with the following
condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer (Siemens
AG-Germany) through their letter # Nil dated May 30, 2012.

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.


Old virsion: 420kV GIS type GID with CB type GSR
400R2B/GSRK, DOUBLE BREAK, Hydraulic mechanism.
Total =

7. 1. 5

33 KV GIS

11

Applicable Standards:

Page 39 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SIEMENS

FACTORY LOCATION
GERMANY

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD Letter # 10-02461-02-03032301 dated
31/08/2010, it is pre-qualified for 36kV GIS type 8DA10,rated
current 2375A @ 40C, 60Hz and short time current rating of
25kA(3sec), CB type 3AH with interrupter type VS 30040 (40kA)
as confirming to SEC specification # 32-TMSS-03, Rev.0 with the
following conditions:
Capacitor bank back to back switching tests in case of non
availability of test report shall be conducted in an independent
testing laboratory in the presence of three (3) SEC engineers &
one (1) SEC approved independent inspection agency Inspector,
all the related costs for witnessing the tests will be borne by the
manufacturer, in case there is a need of capacitor bank
application. This was confirmed by Siemens through letter #
8DA10_PQR_R1 dated 25/08/2010.
Seven (7) years extended warranty for the proposed 36kV GIS
,type 8DA10 from the date of PAC of the turnkey project in case
of contract award or date of delivery in case of direct material
supply order. This was confirmed by Siemens trough letter #
8DA10_PQR_R1 dated 25/08/2010.
Total =

8
8.1
8. 1. 0

BATTERY EQUIPMENT

BATTERY LEAD ACID


Applicable Standards:

BATTERY LEAD ACID


BAE BERLINER BATTERIE FABRIK- G

GERMANY

Yes

C&D

United States

Yes

CEAC

FRANCE

Yes

ENERSYS S.A.R.L.

FRANCE--

Yes

EXIDE

United States

Yes

FIAMM

ITALY

Yes

GOULD (GNB)

United States

Yes

HOPPECKE

GERMANY

Yes

TOVARNA AKUMULATORSKIH BATERIJ

SLOVENIA

Yes

TUNGSTONE (HAWKER TUNGSTONE)

United Kingdom

Yes

VARTA

GERMANY

Yes

YUASA

JAPAN

Yes

46-TMSS-01

PREVIOUSLY KNOWN AS HAWKER S.A.R.L - FRANCE; FIVE


YEARS OF EXTENDED WARRANTY

Page 40 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Total =

8.2
8. 2. 0

BATTERY LEAD ACID, VALVE REGULATED LEAD ACID (VRLA)


Applicable Standards:

BATTERY LEAD ACID, VALVE REGULATED LEAD ACID (VRLA)


AEG Power Solutions SAS

FRANCE--

Yes

C&D

United States

Yes

CHLORIDE (HAWKER CHLORIDE)

United Kingdom

Yes

FIAMM

ITALY

Yes

GNB

United States

Yes

HAWKER LTD.

United Kingdom

Yes

HOPPECKE

GERMANY

Yes

SAB

GERMANY

Yes

SEC

United States

Yes

VARTA

GERMANY

Yes

YUASA EXIDE

United States

Yes

46-TMSS-04
originally was SAFT Power System SAS-France

Total =

8.3
8. 3. 0

12

11

BATTERY NICKEL CADMIUM (NiCD)


Applicable Standards:

BATTERY NICKEL CADMIUM (NiCD)

46-TMSS-06

ALCAD

SWEDEN

Yes

Emerson Network Power Industrial Systems

FRANCE-Lyon

Yes

EMISA

SPAIN

Yes

EXIDE

United States

Yes

FRIWO

GERMANY

Yes

MERGED WITH SAFT NIFE -SWEDEN

GAZ Gerate- und Akkumulatorenwerk Zwickau


GmbH

GERMANY-Zwickau

Yes

Based on TS&SD fax ref.#08-F02675/03-03032301 dated


10/01/2009. Pre-Qualified for Nicd Battery with this conditions:
-First batch shall be type tested in Independent Laboratory iin
presence of (3) SEC engineers & (1) independent inspector.
-(07) years warranty

GNB

United States

Yes

Previously "CHOLORIDE ", the name has been changed to


Emerson Network Power Industrial Systems - France based on
Emerson Network Power Industrial Systems letter # nill dated
12/04/2013.

Page 41 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
SAFT-NIFE

SWEDEN

Pre-Qualified
Manufacturers
By SEC
Yes

VARTA HAWKER

GERMANY

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS
370 TO 1390AH

Total =

8.4
8. 4. 1

BATTERY CHARGER
Applicable Standards:

BATTERY CHARGER

46-TMSS-02

AEG Power Solutions SAS

FRANCE--

Yes

Originally was SAFT Power System SAS-France

BENNING

FRANCE

Yes

Benning Elektrotechnik & Elektronik GmbH &


Co.kG.

GERMANY--

Yes

Previously "Theo-Benning-Germany", the name has been


changed to Benning Elektrotechnik & Elektronik GmbH & Co. KG
-Germany based on TS&SD/ESD letter # 11-00334-03032301
dated 30/01/2011.

BRAGA MORO

ITALY

Yes

Based on S&SD Letter 12-03794-01-30504401 dated November


18, 2012, Braga Moro- Italy is pre-qualified for Battery Chargers
125V DC as conforming to National Grid SA Specification #
46-TMSS-02, Rev.0, with the following conditions:
All Type, Routine and Special testes as per National Grid SA
Specifications/Standards together shall be carried out on the
First unit to be supplied to SEC/National Grid SA of Battery
Chargers 125V DC in an Independent Testing Laboratory in the
presence of three (3) SEC/National Grid SA Engineers & one (1)
SEC/National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by Braga
Moro-Italy. This was confirmed in writing by Braga Moro-Italy
through their letter # SEC Prequalification dated April 13, 2011.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
Braga Moro- Italy through their letter # SEC Prequalification
dated April 13, 2011.

C&D

United States

Yes

Page 42 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
CEG

ITALY-BIBIENA

Pre-Qualified
Manufacturers
By SEC
Yes

Emerson Network Power Industrial Systems

FRANCE-Lyon

Yes

Previously "CHOLORIDE ", the name has been changed to


Emerson Network Power Industrial Systems - France based on
Emerson Network Power Industrial Systems letter # nill dated
12/04/2013.

Emerson Network Power Industrial Systems

FRANCE-Lyon

Yes

Previously "AEES ", the name has been changed to Emerson


Network Power Industrial Systems - France based on Emerson
Network Power Industrial Systems letter # nill dated
12/04/2013.

EMISA (ELECTRO MERCANTIL INDUSTRIAL


S.A. SPAIN)

SPAIN

Yes

ERSKINE

United Kingdom

Yes

EXIDE

United States

Yes

GUTOR ELECTRONIC LTD.

SWITZERLAND

Yes

JESUS MARIA AGUIRRE SA (JEMA)

SPAIN-Lasarte-Oria

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS
Based on TS&SD letter# 09-F001363/02-03032301 dated 2nd.
May 2009 as confirming to SEC specifications # 46-TMSS-02,
rev.0 ; with the following conditions:
All tests shall be carried out on the first batch of Battery
Charger or UPS to be supplied to SEC in securing an order in the
manufacturer's testing laboratory in the presence of three (3)
SEC engineers & one (1) approved independent inspection
agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

Based on S&SD Letter 12-00193-030504001 dated January 17,


2012. It is prequalified for Battery Charger as conforming to SEC
Specification# 46-TMSS-02, Rev.0 with the following conditions:
All Type, Routine and Special testes shall be carried out on the
first batch of each types of Battery Chargers in an Independent
Testing Laboratory in the presence of three (3) SEC Engineers &
one (1) SEC approved Independent Inspection Agency (IIA)
Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # Nil dated June 17, 2011.
Ten (10) years extended warranty from the date of PAC of the
FIRST turnkey project in case of contract award or date of FIRST
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 17, 2011.

Page 43 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Statron AG

FACTORY LOCATION
SWITZERLAND-Maegenwil

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 12-03254-01-30504401 dated August 29,
2012, it is pre-qualified for Battery Chargers 125V DC (Models
BDT) as conforming to SEC Specification # 46-TMSS-02, Rev.0
with the following conditions:
All Type, Routine and Special testes shall be carried out on the
first batch of each types of Battery Chargers 125V DC in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer Statron AG through their letter # bm dated August
13, 2012.
Ten (10) years extended warranty in respect of defects due to
design, manufacturing, installation and workmanship from the
date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material supply
order as confirmed by the manufacturer Statron AG through
their letter # bm dated August 13, 2012.
Total =

8. 4. 2

Applicable Standards:

UPS, 5 THROUGH 100KVA


BRAGA MORO

ITALY

Yes

14

46-TMSS-03
Based on S&SD Letter 12-03794-01-30504401 dated November
18, 2012, Braga Moro- Italy is pre-qualified for UPS as
conforming to National Grid SA Specification # 46-TMSS-03,
Rev.0, with the following conditions:
All Type, Routine and Special testes as per National Grid SA
Specifications/Standards together shall be carried out on the
First unit to be supplied to SEC/National Grid SA of UPS in an
Independent Testing Laboratory in the presence of three (3)
SEC/National Grid SA Engineers & one (1) SEC/National Grid SA
approved Independent Inspection Agency (IIA) Inspector. All
costs of which shall be borne by Braga Moro-Italy. This was
confirmed in writing by Braga Moro-Italy through their letter #
SEC Prequalification dated April 13, 2011.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
Braga Moro- Italy through their letter # SEC Prequalification
dated April 13, 2011.

Page 44 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
CEG

ITALY-BIBIENA

Pre-Qualified
Manufacturers
By SEC
Yes

GUTOR ELECTRONIC LTD.

SWITZERLAND

Yes

JESUS MARIA AGUIRRE SA (JEMA)

SPAIN-Lasarte-Oria

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS
Based on TS&SD letter# 09-F001363/02-03032301 dated 2nd.
May 2009 as confirming to SEC specifications # 46-TMSS-03,
rev.0 ; with the following conditions:
All tests shall be carried out on the first batch of Battery
Charger or UPS to be supplied to SEC in securing an order in the
manufacturer's testing laboratory in the presence of three (3)
SEC engineers & one (1) approved independent inspection
agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.
Based on S&SD Letter 12-00193-030504001 dated January 17,
2012. It is prequalified for UPS up to 100kVA as conforming to
SEC Specification# 46-TMSS-03, Rev.0 with the following
conditions:
All Type, Routine and Special testes shall be carried out on the
first batch of each types of UPS up to 100kVA in an Independent
Testing Laboratory in the presence of three (3) SEC Engineers &
one (1) SEC approved Independent Inspection Agency (IIA)
Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # Nil dated June 17, 2011.
Ten (10) years extended warranty from the date of PAC of the
FIRST turnkey project in case of contract award or date of FIRST
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 17, 2011.

Page 45 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Statron AG

FACTORY LOCATION
SWITZERLAND-Maegenwil

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 12-03254-01-30504401 dated August 29,
2012, it is pre-qualified for UPS (S2000 series) as conforming to
SEC Specification # 46-TMSS-03, Rev.0 with the following
conditions:
All Type, Routine and Special testes shall be carried out on the
first batch of each types of UPS in an Independent Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer Statron AG through
their letter # bm dated August 13, 2012.
Ten (10) years extended warranty in respect of defects due to
design, manufacturing, installation and workmanship from the
date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material supply
order as confirmed by the manufacturer Statron AG through
their letter # bm dated August 13, 2012.
Total =

8. 4. 3

Applicable Standards:

BATTERY CHARGER, 48 VDC


AEG Power Solutions SAS

FRANCE--

Yes

BENNING

FRANCE

Yes

46-TMSS-02,46-TMSS-05
originally was SAFT Power System SAS-France

Page 46 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
BRAGA MORO

FACTORY LOCATION
ITALY

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
I. Prequalified for BATTERY CHARGER, 48 VDC (For Telecom
Applications).
II. Prequalified for DC-DC Converters, 48 Volts based on S&SD
Letter 12-03794-01-30504401 dated November 18, 2012 as
conforming to National Grid SA Specification # 46-TMSS-07,
Rev.0 with the following conditions:
All Type, Routine and Special testes as per National Grid SA
Specifications/Standards together shall be carried out on the
First unit to be supplied to SEC/National Grid SA of DC-DC
Converters, 48 Volts Output in an Independent Testing
Laboratory in the presence of three (3) SEC/National Grid SA
Engineers & one (1) SEC/National Grid SA approved
Independent Inspection Agency (IIA) Inspector. All costs of
which shall be borne by Braga Moro-Italy. This was confirmed in
writing by Braga Moro-Italy through their letter # SEC
Prequalification dated April 13, 2011.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
Braga Moro-Italy through their letter # SEC Prequalification
dated April 13, 2011.

COM 10 INTERNATIONAL PTY. LTD.

AUSTRALIA-ALPHA

Yes

SWITCH MODE RECTIFIERS / BATTERY CHARGERS ONLY FOR


TELECOM APPLICATION.

Emerson Network Power Industrial Systems

FRANCE-Lyon

Yes

Previously "CHOLORIDE ", the name has been changed to


Emerson Network Power Industrial Systems - France based on
Emerson Network Power Industrial Systems letter # nill dated
12/04/2013.

Emerson Network Power Industrial Systems

FRANCE-Lyon

Yes

- Previously "AEES ", the name has been changed to Emerson


Network Power Industrial Systems - France based on Emerson
Network Power Industrial Systems letter # nill dated
12/04/2013.

EMISA (ELECTRO MERCANTIL INDUSTRIAL


S.A. SPAIN)

SPAIN

Yes

- ACCEPTABLE FOR APPLICATIONS OTHER THAN TELECOM

Page 47 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
ERSKINE

United Kingdom

Pre-Qualified
Manufacturers
By SEC
Yes

EXIDE

United States

Yes

SCR TYPE ONLY

HAMMER & SIMMONS

United Kingdom

Yes

Statron AG

SWITZERLAND-Maegenwil

Yes

Based on S&SD Letter 12-03254-01-30504401 dated August 29,


2012, it is pre-qualified for Battery Chargers 48V DC (Models
BDT and MPS) as conforming to SEC Specification #
46-TMSS-02, Rev.0 & 46-TMSS-05, Rev.0, with the following
conditions:

MANUFACTURER

FACTORY LOCATION

REMARKS
Based on TS&SD letter# 09-F02210/03-03032301 dated 1st .
September 2009, ERSKIN System Ltd. (a division of Dale Power
Solution plc) from United Kingdom-Scarborough for 48V DC
battery Charger as confirming to SEC specification #
46-TMSS-05, rev.0 with the following conditions:

All type, design, special & routine tests as per SEC


specifications/standards shall be carried out on the first batch to
be supplied to SEC in securing an order in the manufacturer's
laboratory in the presence of three (3) SEC engineers & one (1)
approved independent inspection agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

All Type, Routine and Special testes shall be carried out on the
first batch of each types of Battery Chargers 48V DC in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer Statron AG through their letter # bm dated August
13, 2012.
Ten (10) years extended warranty in respect of defects due to
design, manufacturing, installation and workmanship from the
date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material supply
order as confirmed by the manufacturer Statron AG through
their letter # bm dated August 13, 2012.
T.D.I

United States

Yes

SWITCH MODE RECTIFIERS ONLY FOR TELECOM


APPLICATIONS
Total =

9
9.1
9. 1. 0

12

LV DISTRIBUTION PANELS

AC & DC DIST. PANELS


AC & DC DIST. PANELS

Applicable Standards:

31-TMSS-02

Page 48 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
ABB/AEIL

Saudi Arabia

Pre-Qualified
Manufacturers
By SEC
Yes

ALFANAR ELECTRICAL SYSTEMS

Saudi Arabia-RIYADH

Yes

EAST & WEST FACTORY

Saudi Arabia-DAMMAM

Yes

ELECTRICAL PANEL BOARD FACTORY/HAWA


TRADING

Saudi Arabia-DAMMAM

Yes

EPS LTD. (GROUPE SCHNEIDER)

Saudi Arabia-RIYADH

Yes

ETA-PCS

United Arab Emirates-DUBAI

Yes

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

MEMF-ETA Switchgear Manufacturing Company

Saudi Arabia-Riyadh

Yes

Based on TS&SD letter #11-F03210/01-03032301 dated


29/11/2011, it is pre-qualified for AC&DC Panels as confirming to
SEC specification # 31-TMSS-02, Rev.0 with the following
conditions:

MANUFACTURER

FACTORY LOCATION

REMARKS

All type, special, routine and sample tests as per SEC


specifications/standards shall be carried out on the first batch of
AC&DC Panels to be supplied to SEC in case of securing an order
in the presence of three (3) SEC Engineers & one (1) approved
independent inspection agency Inspector in an independent
testing laboratory. All the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by
MEMF-ETA Switchgear Manufacturing Company through letter #
Nil dated 14/02/2011.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed by
MEMF-ETA Switchgear Manufacturing Company through letter #
Nil dated 08/12/2010.
MOHAMMAD AL OJAIMI FACTORY

Saudi Arabia-RIYADH

Yes

MUSAID SWITCHGEAR

Saudi Arabia-RIYADH

Yes

REMAL

Saudi Arabia-DAMMAM

Yes

SIEMENS

Saudi Arabia-JEDDAH

Yes

Page 49 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Waha Electric Supply Co. of Saudi Arabia(WESCOSA)-Dammam

FACTORY LOCATION
Saudi Arabia-Dammam

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD Letter # 11-01751/01-03032301 dated
27/06/2011, it is pre-qualified for Auxiliary AC & DC Panels up to
132kV only as confirming to SEC specification # 31-TMSS-02,
Rev.0 with the following conditions:
All type, special, routine and sample tests as per SEC
specifications/standards shall be carried out on the first batch of
each type of Auxiliary AC&DC Panels to be supplied to SEC in
case of securing an order in the presence of three (3) SEC
engineers & one (1) approved independent inspection agency
Inspector in an independent testing laboratory. All the related
costs for witnessing the tests will be borne by the manufacturer.
This was confirmed by WESCOSA-Dammam through letter # Nil
dated 18/05/2010.
Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed by
WESCOSA-Dammam through letter # Nil dated 30/08/2010.

10

Total =

12

Total =

LOAD BREAK SWITCHES UPTO 34.5 KV & RING MAIN UNITS, 15 KV

10 . 1

LOAD BREAK SWITCHES UPTO 34.5 KV

10. 1. 0

LOAD BREAK SWITCHES UPTO 34.5 KV

10 . 2

RMU, 15 KV

10. 2. 0

RMU, 15 KV

Applicable Standards:

ABB/AEIL

Saudi Arabia

Yes

AREVA

FRANCE

Yes

EPS LTD. (GROUPE SCHNEIDER)

Saudi Arabia-RIYADH

Yes

FRITZ DRIESCHER

GERMANY

Yes

HITACHI

JAPAN

Yes

KONCAR

Croatia/Hrvatska

Yes

SIEMENS

GERMANY

Yes

Applicable Standards:
ABB

Saudi Arabia-RIYADH

Yes

AREVA

FRANCE

Yes

32-TMSS-07

Page 50 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

EPS LTD. (GROUPE SCHNEIDER)

Saudi Arabia-RIYADH

Pre-Qualified
Manufacturers
By SEC
Yes

FRITZ DRIESHER KG

GERMANY

Yes

GULF REYROLLE LTD

Saudi Arabia-DAMMAM

Yes

MERLIN GERIN

FRANCE

Yes

SAUDI LUCY

Saudi Arabia-AL KHOBAR

Yes

SIEMENS AG EVM

GERMANY-FRANKFURT

Yes

THE INTERNATIONAL ELECTRICAL PRODUCTS


CO.

Saudi Arabia-DAMMAM

Yes

W. LUCY

United Kingdom

Yes

MANUFACTURER

10 . 3

SPARE PARTS FOR RMU & EOS

10. 3. 0

SPARE PARTS FOR RMU & EOS

REMARKS

Total =

10

Total =

Applicable Standards:
CELLMEC

11

FACTORY LOCATION

BAHRAIN

Yes

NEUTRAL EARTHING RESISTORS UP TO 33 KV

11 . 1

NER, UP TO 33 KV

11. 1. 0

NER, UP TO 33 KV

Applicable Standards:
CRESSAL RESISTOR

United Kingdom

Yes

FURSE

United Kingdom

Yes

M.S.Resistances

FRANCE--

Yes

METAL DEPLOYE

FRANCE

Yes

NATIONAL

INDIA

Yes

57-TMSS-01

EXTENDED GUARANTEE / WARRANTY FOR 10 YEARS

Total =

12

BARE CONDUCTORS

12 . 1

TYPE ACAR / ACSR / AAAC

12. 1. 1

BARE CONDUCTOR, ACAR / ACSR / AAAC

Applicable Standards:

10-TMSS-01

Page 51 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
ALCOA

United States

Pre-Qualified
Manufacturers
By SEC
Yes

ALFANAR ELECTRICAL SYSTEMS

Saudi Arabia-RIYADH

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

Based on S&SD letter# 13-02020-01-30504401 dated July 30,


2013, it is pre-qualified for ACSR, ACAR and AAAC type Bare
Overhead Line Conductors conforming to National Grid SA
specification # 10-TMSS-01, Rev.01 with the following
conditions:
Only ACSR Condor Conductor 795kcmil (402.83mm) was
successfully type tested in accredited Kinectrics
Laboratory-Canada in the presence of SEC/National Grid SA
Engineers with acceptable results (Kinectrics Report #
K-419415-RC-0001-R01, dated 11th Feb 2013).
The first batch of ACAR and AAAC conductors to be supplied to
SEC/National Grid SA shall be type tested in an independent
accredited test laboratory in the presence of three (3)
SEC/National Grid SA Engineers & one (1) SEC/National Grid SA
approved independent inspection agency Inspector and all costs
pertaining to the tests shall be borne by the manufacturer.
Ten (10) years extended warranty from the date of Provisional
Acceptance Certificate (PAC) of the first turnkey project in case
of contract award or date of first delivery in case of direct
material supply order. This was confirmed in writing by the
manufacturer through their letter # C-PRQ-2013-02 dated June
17, 2013.

APAR Industries Ltd-NALAGARH

INDIA-NALAGARH

Yes

Based on TS&SD Letter # 10-01566-2-03032300 dated


14/06/2010, it is pre-qualified for Bar Conductors as confirming
to SEC specification # 10-TMSS-01, Rev.01 with the following
conditions:

The first batch of each type of conductors to be supplied to


SEC shall be type tested in an independent accredited test
laboratory in the presence of three (3) SEC engineers & one (1)
SEC approved independent inspection agency Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.
This has been confirmed in writing by the manufacturer, through
letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer; through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.

Page 52 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
APAR Industries Ltd-SILVASSA

FACTORY LOCATION
INDIA-SILVASSA

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Bar Conductors as confirming
to SEC specification # 10-TMSS-01, Rev.01
with the following conditions:

The first batch of each type of conductors to be supplied to


SEC shall be type tested in an independent accredited test
laboratory in the presence of three (3) SEC engineers & one (1)
SEC approved independent inspection agency Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.
This has been confirmed in writing by the manufacturer, through
letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer; through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.

MIDAL CABLE LTD.

BAHRAIN-MANAMA

Yes

OMAN CABLE INDUSTRIES

MUSCAT--

Yes

RIYADH CABLES

Saudi Arabia-RIYADH

Yes

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

SOUTHWIRE

United States

Yes

STERLITE (INDIA)

INDIA--

Yes

FIRST LOT OF EACH TYPE SHALL BE TYPE TESTED IN AN


INDEPENDENT LABORATORY PER 10-TMSS-01 & OTHER INTL.
STANDARDS, IN PRESENCE OF SEC ENGINEERS AND ALL COST
SHALL BE BORNE BY THE MANUFACTURER.10 YEARS
EXTENDED WARRANTY.

Based on TS&SD Letter # 10-F001691/01-03032301 dated June


19, 2010 and S&SD Letter 12-02686-1-30504401 dated July 23,
2012, it is pre-qualified for Bare Conductors types (ACAR, ACSR
& AAAC) as confirming to SEC Specification # 10-TMSS-01,
Rev.01 with the following condition:
ACAR, ACSR & AAAC conductors were successfully type tested
in accredited laboratory in the presence of SEC Engineers with
acceptable results.
Ten (10) years warranty from the date of PAC of the first
turnkey project in case of contract award or date of first delivery
in case of direct material supply order.
Total =

12 . 2

10

TYPE ACSR/AW

Page 53 of 190

SER
12. 2. 1

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

Applicable Standards:

BARE CONDUCTOR, ACSR/AW


ALCOA

United States

Yes

APAR Industries Ltd-NALAGARH

INDIA-NALAGARH

Yes

REMARKS

10-TMSS-01

Based on TS&SD Letter # 10-01566-2-03032300 dated


14/06/2010, it is pre-qualified for Bar Conductors as confirming
to SEC specification # 10-TMSS-01, Rev.01 with the following
conditions:

The first batch of each type of conductors to be supplied to


SEC shall be type tested in an independent accredited test
laboratory in the presence of three (3) SEC engineers & one (1)
SEC approved independent inspection agency Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.
This has been confirmed in writing by the manufacturer, through
letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer; through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.

APAR Industries Ltd-SILVASSA

INDIA-SILVASSA

Yes

Based on TS&SD Letter # 10-01566-2-03032300 dated


14/06/2010, it is pre-qualified for Bar Conductors as confirming
to SEC specification # 10-TMSS-01, Rev.01 with the following
conditions:

The first batch of each type of conductors to be supplied to


SEC shall be type tested in an independent accredited test
laboratory in the presence of three (3) SEC engineers & one (1)
SEC approved independent inspection agency Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.
This has been confirmed in writing by the manufacturer, through
letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer; through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.

JEDDAH CABLE CO.

Saudi Arabia-JEDDAH

Yes

MIDAL CABLE LTD.

BAHRAIN-MANAMA

Yes

OMAN CABLE INDUSTRIES

MUSCAT--

Yes

FIRST LOT OF EACH TYPE SHALL BE TYPE TESTED IN AN


INDEPENDENT LABORATORY PER 10-TMSS-01 & OTHER INTL.
STANDARDS, IN PRESENCE OF SEC ENGINEERS AND ALL COST
SHALL BE BORNE BY THE MANUFACTURER.10 YEARS
EXTENDED WARRANTY.

Page 54 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

RIYADH CABLES

Saudi Arabia-RIYADH

Pre-Qualified
Manufacturers
By SEC
Yes

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

SOUTHWIRE

United States

Yes

STERLITE (INDIA)

INDIA--

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

Based on TS&SD Letter # 10-F001691/01-03032301 dated


19/06/2010, it is pre-qualified for Bare Conductors type
(ACSR/AW) as confirming to SEC specification # 10-TMSS-01
Rev.01 with the following condition:

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.
Total =

12 . 3

GROUND WIRE

12. 3. 1

GROUND WIRE

Applicable Standards:
ALCOA

United States

Yes

APAR Industries Ltd-NALAGARH

INDIA-NALAGARH

Yes

10

10-TMSS-03

Based on TS&SD Letter # 10-01566-2-03032300 dated


14/06/2010, it is pre-qualified for Overhead Ground Wire (OGW)
of Aluminum Clad Steel (ACS) Type only as confirming to SEC
specification # 10-TMSS-03, Rev.0 with the following conditions:

The first batch of Aluminum Clad Steel (ACS) type to be


supplied to SEC shall be type tested in an independent
accredited test laboratory in the presence of three (3) SEC
engineers & one (1) SEC approved independent inspection
agency Inspector and all cost pertaining to the tests shall be
borne by the manufacturer. This has been confirmed in writing
by the manufacturer through letter # AIL/BRD/PQ/SEC/19 dated
22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.

Page 55 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
APAR Industries Ltd-SILVASSA

FACTORY LOCATION
INDIA-SILVASSA

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Overhead Ground Wire (OGW)
of Aluminum Clad Steel (ACS) Type only as confirming to SEC
specification # 10-TMSS-03, Rev.0 with the following conditions:

The first batch of Aluminum Clad Steel (ACS) type to be


supplied to SEC shall be type tested in an independent
accredited test laboratory in the presence of three (3) SEC
engineers & one (1) SEC approved independent inspection
agency Inspector and all cost pertaining to the tests shall be
borne by the manufacturer. This has been confirmed in writing
by the manufacturer through letter # AIL/BRD/PQ/SEC/19 dated
22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.

ECN CG SA

SPAIN

Yes

J-POWER SYSTEM CORP.

JAPAN

Yes

MIDAL CABLE LTD.

BAHRAIN-MANAMA

Yes

RIYADH CABLES

Saudi Arabia-RIYADH

Yes

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

SOUTHWIRE

United States

Yes

TREFILEUROPE

FRANCE

Yes
Total =

12 . 4

COPPER CLAD, STEEL GROUNDING CONDUCTOR & GROUNDING ROD

12. 4. 1

COPPER CLAD STEEL GROUNDING CONDUCTOR AND GROUNDING ROD

Applicable Standards:

ComScope Bimetals USA

United States-Statesville, NC

Yes

FM Sudafix

United Kingdom-Nottingham

Yes

FURSE

Saudi Arabia

Yes

GANSEC SHENGYUEAN WIRE & CABLE CO.


LTD.

CHINA

Yes

ILJIN CORP./JIWOONG ELECTRIC CO.

SOUTH KOREA

Yes

LTV COPPERWELD

United States

Yes

SAUDI ELECTRIC INDUSTRIES CO. LTD.

Saudi Arabia-JEDDAH

Yes

10

10-TMSS-05

Including Exothermic Welding and Grounding connectors.

Page 56 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Total =

12 . 5

COMPOSITE OPTICAL OH GROUND WIRE (OPGW)

12. 5. 1

OPGW

Applicable Standards:

10-TMSS-04

AFL TELECOMMUNICATIONS EUROPE LTD

United Kingdom--

Yes

PREVIOUSLY ALCOA FUJIKURA LTD (AFL).

AFL Telecommunications GmbH

GERMANY-Monchengladbach

Yes

EXTENDED GUARANTEE/WARRANTY FOR A PERIOD OF 10


YEARS.

BRUGG TELECOM AG

SWITZERLAND

Yes

CORNING CABLES (BICC)

United Kingdom-PRESCOT

Yes

DRAKA NK

FINLAND

Yes

FUJIKURA

JAPAN

Yes

FURUKAWA ELECTRIC CO. LTD.

JAPAN

Yes

Jiangsu Zhongtian Technology Co.Ltd (ZTT)


-China

CHINA-Nantong

Yes

Previously Draka Comteq Germany GmbH & KG.

Based on TS&SD Letter # 10-01654-03032301 dated June 05,


2010 and S&SD Letter 12-05204-1-30504401 dated February
04, 2013. It is prequalified for OPGW as conforming to National
Grid SA specification # 10-TMSS-04, Rev.0, with the following
conditions:
OPGW type ZTT 13.3mm & ZTT 17.3mm 48 fibers is
successfully type tested as per SEC/National Grid SA
requirements as mentioned below:
-KEMA witness report TIC 3170-12 for ZTT 13.3mm OPGW
-SECRI Type Test Report 12-2009-1 for ZTT 13.3mm OPGW
-KEMA witness report TIC 3171-12 for ZTT 17.3mm OPGW
-SECRI Type Test Report 12-2009-2 for ZTT 17.3mm OPGW
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or the date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 18, 2009.

Page 57 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
LS CABLES

FACTORY LOCATION
KOREA, Republic of

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 10-02583-03032301 dated
19/09/2010, it is pre-qualified for OPGW as confirming to SEC
specification # 10-TMSS-04,Rev.0, with the following conditions:

All type/design; routine/sample and special tests per SEC


material specification # 10-TMSS-04, Rev.0 of first batch of each
types of OPGW to be supplied to SEC shall be conducted in an
independent testing laboratory in the presence of three (3) SEC
engineers & one (1) SEC approved independent inspection
agency Inspector and all cost pertaining to the tests shall be
borne by Manufacturer. This was confirmed in writing by the
manufacturer through letter #Nil dated 24th December 2009.

Ten (10) years extended warranty for each types of OPGW


from the date of PAC of the turnkey project in case of contract
award or date of delivery in case of direct material supply order.
This was confirmed in writing by the manufacturer through letter
#Nil dated 24th December 2009.

PHILLIPS FITEL

CANADA

Yes

PIRELLI

ITALY

Yes

PRYSMIAN TELECOM

SPAIN

Yes

PREVIOUSLY "PIRELLI"

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

Based on TS&SD letter# 09-F00730/03-03032301 dated 24th


August 2009, Taihan Electric Wire Co. Ltd. from South
Korea-Anyang for OPGW as confirming to SEC specification #
10-TMSS-04, rev.0 with the following conditions:

All type, design, special & routine tests as per SEC


specifications/standards shall be carried out on the first batch to
be supplied to SEC in securing an order in the manufacturer's
laboratory in the presence of three (3) SEC engineers & one (1)
approved independent inspection agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.
Total =

12 . 6

HEAT RESISTANT ALUMINUM ALLOY CONDUCTOR

12. 6. 1

HEAT RESISTANT ALUMINUM ALLOY CONDUCTOR

Applicable Standards:

13

10-TMSS-06

FUJIKURA VISCAS CORP

JAPAN

Yes

IT IS A CONSORTIUM OF FUJIKURA & FURUKAWA. ONLY INVAR


CONDUCTORS PER CLAUSE 1.3 & 1.4 OF 10-TMSS-06. FIRST
LOT TO BE TYPE TESTED IN THE PRESENCE OF 3 SEC ENGRS
AND IIA INSPECTOR; EXTENDED WARRANTY FOR 10 YEARS.

J-POWER SYSTEM CORP.

JAPAN

Yes

Based on TS&SD letter# 09-00649-1-03032301 dated 28 March


2009 it is pre-qualified for GTACSR & GZTACSR.

Page 58 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
LS CABLES

FACTORY LOCATION
KOREA, Republic of

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 10-02584-03032301 dated
19/09/2010, it is pre-qualified for Heat Resistance Aluminum
Alloy Conductors, Gap& Non Gap type as confirming to SEC
specification # 10-TMSS-06,Rev.0, with the following conditions:

All type/design; routine/sample and special tests per SEC


material specification # 10-TMSS-06, Rev.0 of first batch of each
types of Heat Resistance Aluminum Alloy Conductors to be
supplied to SEC shall be conducted in an independent testing
laboratory in the presence of three (3) SEC engineers & one (1)
SEC approved independent inspection agency Inspector and all
cost pertaining to the tests shall be borne by Manufacturer. This
was confirmed in writing by the manufacturer through letter #Nil
dated 08th January 2010.

Ten (10) years extended warranty for each types of Heat


Resistance Aluminum Alloy Conductors from the date of PAC of
the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed in
writing by the manufacturer through letter #Nil dated 08th
January 2010.

Full time presence of LS-Korea expert during execution of


first order with Gap type conductor for guidance and training of
SEC/Contractor staff about installation of this type of conductor
as confirmed through LS letter # LS/LHJ-100526/00 dated 26th
May 2010.

Full technical support will be provided to SEC during


operation of Gap Conductors for minimum five (5) years period
from first project as confirmed through LS letter # LS/LHJ100526/00 dated 26th May 2010.
Total =

13

INSULATED CONDUCTOR CABLE (XLPE)

13 . 1

13.8 KV

13. 1. 1

XLPE CABLE 13.8 KV

Applicable Standards:

11-TMSS-04

Page 59 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ALFANAR ELECTRICAL SYSTEMS

FACTORY LOCATION
Saudi Arabia-RIYADH

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 13-05014-2-3050440 dated September
08, 2013, it is pre-qualified for Insulated Conductor Cable (XLPE)
as conforming to National Grid SA Specification # 11-TMSS-04,
Rev.0 with the following conditions:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery (in case of direct material supply order), as confirmed
through ALFANAR Electrical Systems, Riyadh letter # nil dated
March 10, 2013.
Type Tests have been successfully conducted in
KINETRIC-Canada in the presence of National Grid SA Engineers
on 1x630mm2 CU/XLPE/ATA/PVC 20/35 KV MV Cable during 9th
to 22nd April 2013. However, any MV Power Cable beyond cable
size of 630 mm2 to be supplied to SEC/National Grid SA shall
fully type tested at an accredited laboratory in the presence of
National Grid SA Engineers & third party inspector.

DUBAI CABLE CO.

United Arab Emirates-DUBAI

Yes

Including Joints & Terminations

ELSEWEDY EGYTECH CABLE CO.

EGYPT--

Yes

Including Joints & Terminations

JEDDAH CABLE CO.

Saudi Arabia-JEDDAH

Yes

Including Joints & Terminations

LS

KOREA, Republic of

Yes

PREVIOUSLY LG; Including Joints & Terminations

OMAN CABLE INDUSTRIES

MUSCAT--

Yes

Ref# is 08-02531/01-0303230 dated 08/11/2008


no accessories are pre-qualified

RIYADH CABLES

Saudi Arabia-RIYADH

Yes

Including Joints & Terminations

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

Including Joints & Terminations

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

Including Joints & Terminations


Total =

13 . 2

33 & 34.5 KV

13. 2. 1

XLPE CABLE 33 & 34.5 KV

Applicable Standards:

11-TMSS-04

Page 60 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ALFANAR ELECTRICAL SYSTEMS

FACTORY LOCATION
Saudi Arabia-RIYADH

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 13-05014-2-30504401 dated September
08, 2013, it is pre-qualified for Insulated Conductor Cable (XLPE)
as conforming to National Grid SA Specification # 11-TMSS-04,
Rev.0 with the following conditions:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery (in case of direct material supply order), as confirmed
through ALFANAR Electrical Systems, Riyadh letter # nil dated
March 10, 2013.
Type Tests have been successfully conducted in
KINETRIC-Canada in the presence of National Grid SA Engineers
on 1x630mm2 CU/XLPE/ATA/PVC 20/35 KV MV Cable during 9th
to 22 April 2013. However, any MV Power Cable beyond cable
size of 630 mm2 to be supplied to National Grid SA shall be fully
type tested at an accredited laboratory in the presence of
National Grid SA Engineers & third party inspector.

DAINICHI-NIPPON CABLES (MITSUBISHI)

JAPAN

Yes

Including Joints & Terminations

DEMIRER KABLO/SAUDI CABLE CO.

TURKEY--

Yes

Including Joints & Terminations

DUBAI CABLE CO.

United Arab Emirates-DUBAI

Yes

Including Joints & Terminations

ELSEWEDY EGYTECH CABLE CO.

EGYPT--

Yes

Including Joints & Terminations

FUJIKURA CABLES

JAPAN

Yes

Including Joints & Terminations

JEDDAH CABLE CO.

Saudi Arabia-JEDDAH

Yes

Including Joints & Terminations

J-POWER SYSTEM CORP.

JAPAN

Yes

Including Joints & Terminations

LS

KOREA, Republic of

Yes

PREVIOUSLY LG; Including Joints & Terminations

MKM

HUNGARY

Yes

Including Joints & Terminations

OMAN CABLE INDUSTRIES

MUSCAT--

Yes

Ref# is 08-02531/01-0303230 dated 08/11/2008


no accessories are pre-qualified

RIYADH CABLES

Saudi Arabia-RIYADH

Yes

Including Joints & Terminations

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

Including Joints & Terminations

SHOWA CABLE

JAPAN

Yes

Including Joints & Terminations

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

Including Joints & Terminations


Total =

13 . 3

XLPE CABLES 69 KV

13. 3. 1

XLPE CABLES 69 KV

Applicable Standards:
ALCATEL

FRANCE

Yes

15

11-TMSS-01
Including Joints & Terminations

Page 61 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

DAINICHI-NIPPON CABLES (MITSUBISHI)

JAPAN

Pre-Qualified
Manufacturers
By SEC
Yes

DEMIRER KABLO/SAUDI CABLE CO.

TURKEY--

Yes

Including Joints & Terminations

DRAKA NK

FINLAND

Yes

Including Joints & Terminations

ELSEWEDY EGYTECH CABLE CO.

EGYPT--

Yes

TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLE


TESTS AT SEC APPROVED INDEPENDENT LABORATORY IN
PRESENCE OF A REPRESENTATIVE OF 3RD PARTY INSPECTION
AGENCY & THREE ENGINEERS OF SEC FOR FIRST CONTRACT;
10 YEARS OF EXTENDED GUARANTEE/WARRANTY; FOR JOINTS
& TERMINATIONS ALSO;

FUJIKURA CABLES

JAPAN

Yes

Including Joints & Terminations

FURUKAWA ELECTRIC CO. LTD.

JAPAN

Yes

Including Joints & Terminations

JEDDAH CABLE CO.

Saudi Arabia-JEDDAH

Yes

Based on TS&SD letter # 10-02784-01-03032301 dated


24/10/2010, it is pre-qualified for 69kV, 1x630mm XLPE Power
Cable as confirming to SEC specification # 11-TMSS-01, Rev.0,
with the following condition:

MANUFACTURER

FACTORY LOCATION

REMARKS
Including Joints & Terminations

Ten (10) years extended warranty for the proposed 69kV,


1x630mm XLPE Power Cable from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed in
writing by Jeddah Cable Co. through letter #Nil dated 26th June
2006.
J-POWER SYSTEM CORP.

JAPAN

Yes

Including Joints & Terminations

MKM

HUNGARY

Yes

Including Joints & Terminations

NEXANS NORWAY AS

NORWAY

Yes

Including Joints & Terminations

PIRELLI KABEL AND SYSTEM GMBH

GERMANY-BERLIN

Yes

Including Joints & Terminations

RIYADH CABLES

Saudi Arabia-RIYADH

Yes

Including Joints & Terminations

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

Including Joints & Terminations

SUDKABEL

GERMANY-GERMANY

Yes

PREVIOUSLY ABB. Including Joints & Terminations


Total =

13 . 4

110KV TO 132 KV

13. 4. 1

XLPE CABLES 110 TO 132 KV

Applicable Standards:

15

11-TMSS-02

BRUGG

SWITZERLAND

Yes

Including Joints & Terminations

DAINICHI-NIPPON CABLES (MITSUBISHI)

JAPAN

Yes

Including Joints & Terminations

DEMIRER KABLO/SAUDI CABLE CO.

TURKEY--

Yes

Including Joints & Terminations

DRAKA NK

FINLAND

Yes

Including Joints & Terminations

Page 62 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

ELSEWEDY EGYTECH CABLE CO.

EGYPT--

Pre-Qualified
Manufacturers
By SEC
Yes

FUJIKURA

JAPAN

Yes

Including Joints & Terminations

FURUKAWA ELECTRIC CO. LTD.

JAPAN

Yes

Including Joints & Terminations

JEDDAH CABLE CO.

Saudi Arabia-JEDDAH

Yes

Based on TS&SD letter # 10-02784-01-03032301 dated


24/10/2010, it is pre-qualified for 132kV, 1x1200mm XLPE
Power Cable as confirming to SEC specification # 11-TMSS-02,
Rev.0, with the following condition:

MANUFACTURER

FACTORY LOCATION

REMARKS
TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLE
TESTS AT SEC APPROVED INDEPENDENT LABORATORY IN
PRESENCE OF A REPRESENTATIVE OF 3RD PARTY INSPECTION
AGENCY & THREE ENGINEERS OF SEC FOR FIRST CONTRACT;
10 YEARS OF EXTENDED GUARANTEE/WARRANTY; FOR JOINTS
& TERMINATIONS ALSO;

Ten (10) years extended warranty for the proposed 132kV,


1x1200mm XLPE Power Cable from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed in
writing by Jeddah Cable Co. through letter #Nil dated 26th June
2006.
J-POWER SYSTEM CORP.

JAPAN

Yes

Including Joints & Terminations

LS

KOREA, Republic of

Yes

PREVIOUSLY LG; Including Joints & Terminations

NEXANS NORWAY AS

NORWAY

Yes

Including Joints & Terminations

PIRELLI KABEL AND SYSTEM GMBH

GERMANY-BERLIN

Yes

Including Joints & Terminations

RIYADH CABLES

Saudi Arabia-RIYADH

Yes

Including Joints & Terminations

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

Not approved to supply the power cable 110/115KV , 132KV


with conductor cross section of 1X2500 mm,XLPE, as per
11-TMSS-02, Rev.01 for any SEC/ National Grid SA projects
based on S&SD letter# 13-02128-02-30504401 dated
November 25, 2013.

SUDKABEL

GERMANY-GERMANY

Yes

PREVIOUSLY ABB. Including Joints & Terminations

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

Including Joints & Terminations


Total =

13 . 5

230 K V

13. 5. 1

XLPE CABLE 230 K V

Applicable Standards:

16

11-TMSS-02

BRUGG

SWITZERLAND

Yes

Including Joints & Terminations; COMPLETE TYPE, SPECIAL &


ROUTINE TESTS FOR THE FIRST ORDER , ALSO 10 YEARS
WARRANTY FROM THE DATE OF PAC ARE REQUIRED

DAINICHI-NIPPON CABLES (MITSUBISHI)

JAPAN

Yes

Including Joints & Terminations

Page 63 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

DEMIRER KABLO/SAUDI CABLE CO.

TURKEY--

Pre-Qualified
Manufacturers
By SEC
Yes

FUJIKURA

JAPAN

Yes

Including Joints & Terminations

FURUKAWA ELECTRIC CO. LTD.

JAPAN

Yes

Including Joints & Terminations

J-POWER SYSTEM CORP.

JAPAN

Yes

Including Joints & Terminations

LS

KOREA, Republic of

Yes

PREVIOUSLY LG;
Including Joints & Terminations.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.

NEXANS NORWAY AS

NORWAY

Yes

Including Joints & Terminations

PIRELLI KABEL AND SYSTEM GMBH

GERMANY-BERLIN

Yes

Including Joints & Terminations

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

based on TS&SD letter# 09-01366-03032301 dated 10th. May


2009, it is pre-qualified as conforming to SEC specifications #
11-TMSS-02, rev.0 with the following conditions:

All type/design and routine/sample tests shall be carried


out on the first batch of 230kV XLPE power cable to be supplied
to SEC in securing an order in an independent testing laboratory
as per IEC/AEIC and SEC standards in the presence of three (3)
SEC engineers & one (1) approved independent inspection
agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

SUDKABEL

GERMANY-GERMANY

Yes

PREVIOUSLY ABB. Including Joints & Terminations

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

Including Joints & Terminations.


Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.

MANUFACTURER

FACTORY LOCATION

REMARKS
Including Joints & Terminations

Total =

13 . 6

380 KV

13. 6. 1

XLPE CABLE -380 KV

Applicable Standards:

12

11-TMSS-02

BRUGG

SWITZERLAND

Yes

Including Joints & Terminations; COMPLETE TYPE, SPECIAL &


ROUTINE TESTS FOR THE FIRST ORDER , ALSO 10 YEARS
WARRANTY FROM THE DATE OF PAC ARE REQUIRED

DAINICHI-NIPPON CABLES (MITSUBISHI)

JAPAN

Yes

Including Joints & Terminations

DEMIRER KABLO/SAUDI CABLE CO.

TURKEY--

No

Based on TS&SD letter 11-01374-03032301 dated April 27,


2011. It is DISQUALIFIED for 380KV XLPE Cable.

J-POWER SYSTEM CORP.

JAPAN

Yes

Including Joints & Terminations

Page 64 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
LS

KOREA, Republic of

Pre-Qualified
Manufacturers
By SEC
Yes

NEXANS

FRANCE

Yes

Including Joints & Terminations

NEXANS

NORWAY

Yes

Including Joints & Terminations

NKT

GERMANY

Yes

Including Joints & Terminations

PIRELLI

GERMANY-BERLIN

Yes

Including Joints & Terminations

SUDKABEL

GERMANY-GERMANY

Yes

PREVIOUSLY ABB. Including Joints & Terminations

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

Including Joints & Terminations.


Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.

VISCAS FUJIKURA

JAPAN

Yes

Including Joints & Terminations

MANUFACTURER

FACTORY LOCATION

REMARKS
PREVIOUSLY LG;
Including Joints & Terminations.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.

Total =

14

12

LOW-PRESSURE OIL FILLED (LPOF) CABLE

14 . 1

110 TO 132 KV

14. 1. 1

LPOF CABLE 110 KV TO 132 KV

Applicable Standards:

11-TMSS-03

ALCATEL CABLE

FRANCE

Yes

Including Joints & Terminations

CANADA WIRE

CANADA

Yes

Including Joints & Terminations

DAINICHI-NIPPON CABLES (MITSUBISHI)

JAPAN

Yes

Including Joints & Terminations

DATWYLER

United Kingdom

Yes

Including Joints & Terminations

FUJIKURA

JAPAN

Yes

Including Joints & Terminations

FURUKAWA ELECTRIC CO. LTD.

JAPAN

Yes

Including Joints & Terminations

J-POWER SYSTEM CORP.

JAPAN

Yes

Including Joints & Terminations

KABEL RHEYDT (AEG)

GERMANY

Yes

Including Joints & Terminations

KABEL WERK BRUGG AG

SWITZERLAND

Yes

Including Joints & Terminations

LS CABLES

KOREA, Republic of

Yes

PREVIOUSLY LG; Including Joints & Terminations

NEXAN(CORTALLIOD)

SWITZERLAND

Yes

Including Joints & Terminations

NEXANS NORWAY AS

NORWAY

Yes

Including Joints & Terminations

PIRELLI

ITALY

Yes

Including Joints & Terminations

Page 65 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

PIRELLI KABEL AND SYSTEM GMBH

GERMANY-BERLIN

Pre-Qualified
Manufacturers
By SEC
Yes

SHOWA CABLE

JAPAN

Yes

Including Joints & Terminations

SUDKABEL

GERMANY-GERMANY

Yes

PREVIOUSLY ABB. Including Joints & Terminations

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

Including Joints & Terminations

MANUFACTURER

FACTORY LOCATION

REMARKS
Including Joints & Terminations

Total =

14 . 2

230 KV

14. 2. 1

LPOF CABLE 230 KV

Applicable Standards:

11-TMSS-03

ALCATEL

FRANCE

Yes

Including Joints & Terminations

CANADA WIRE

CANADA

Yes

Including Joints & Terminations

DAINICHI-NIPPON CABLES (MITSUBISHI)

JAPAN

Yes

Including Joints & Terminations

FUJIKURA

JAPAN

Yes

Including Joints & Terminations

FURUKAWA ELECTRIC CO. LTD.

JAPAN

Yes

Including Joints & Terminations

J-POWER SYSTEM CORP.

JAPAN

Yes

Including Joints & Terminations

KABEL RHEYDT (AEG)

GERMANY

Yes

Including Joints & Terminations

NEXANS NORWAY AS

NORWAY

Yes

Including Joints & Terminations

PIRELLI KABEL AND SYSTEM GMBH

GERMANY-BERLIN

Yes

Including Joints & Terminations

SUDKABEL

GERMANY-GERMANY

Yes

PREVIOUSLY ABB. Including Joints & Terminations

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

Including Joints & Terminations.


Complete Type, Routine / Sample tests for first order.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.
Total =

14 . 3

380 KV

14. 3. 1

LPOF CABLE 380 KV

17

Applicable Standards:

11

11-TMSS-03

ALCATEL

FRANCE

Yes

Including Joints & Terminations

CANADA WIRE

CANADA

Yes

Including Joints & Terminations

DAINICHI-NIPPON CABLES (MITSUBISHI)

JAPAN

Yes

Including Joints & Terminations

FUJIKURA

JAPAN

Yes

Including Joints & Terminations

FURUKAWA ELECTRIC CO. LTD.

JAPAN

Yes

Including Joints & Terminations

Page 66 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

HITACHI CABLE LTD.

JAPAN

Pre-Qualified
Manufacturers
By SEC
Yes

J-POWER SYSTEM CORP.

JAPAN

Yes

Including Joints & Terminations

KABEL RHEYDT (AEG)

GERMANY

Yes

Including Joints & Terminations

LS CABLES

KOREA, Republic of

Yes

PREVIOUSLY LG;
Including Joints & Terminations.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.

MITSUBISHI CABLE INDUSTRIES LTD

JAPAN

Yes

Including Joints & Terminations

PIRELLI

ITALY

Yes

Including Joints & Terminations

PIRELLI GENERAL

United Kingdom

Yes

Including Joints & Terminations

PIRELLI KABEL AND SYSTEM GMBH

GERMANY-BERLIN

Yes

Including Joints & Terminations

SHOWA CABLE

JAPAN

Yes

Including Joints & Terminations

SIEMENS

GERMANY

Yes

Including Joints & Terminations

STANDARD TELEFON OG KABELFABRIK A/S

NORWAY

Yes

Including Joints & Terminations

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

Including Joints & Terminations.


Complete Type, Routine / Sample tests for first order.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.

MANUFACTURER

FACTORY LOCATION

REMARKS
Including Joints & Terminations

Total =

14 . 4

LINK BOX FOR U/G POWER

14. 4. 1

LINK BOX FOR U/G POWER

Applicable Standards:

17

12-TMSS-11

---

Yes

LINK BOX SUPPLIED / MANUFACTURED BY APPROVED POWER


CABLE MANUFACTURERS ARE ACCEPTABLE

AARTCO

Saudi Arabia-Al-Khobar

Yes

UP TO 230KV.

ABB

SWEDEN

Yes

AK POWER SOLUTONS PTY LTD

AUSTRALIA-Huntingwood, NSW

Yes

AL SHAHRANI EST.

Saudi Arabia-RIYADH

Yes

DEMIRER KABLO/SAUDI CABLE CO.

TURKEY--

Yes

FUJIKURA VISCAS CORP

JAPAN

Yes

Previously HAYCOLEC SWITCHGEAR PTY Australia-NSW [The


name has been changed to AK POWER SOLUTONS PTY LTDAustralia-Huntingwood, NSW based on S&SD/P&SFD letter #
13-07444-30504401 dated December 11, 2013 and based on AK
POWER SOLUTONS PTY LTD- Australia-NSW-Huntingwood Letter
# NG251113 dated November 25, 2013].

Page 67 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

J-POWER SYSTEM CORP.

JAPAN

Pre-Qualified
Manufacturers
By SEC
Yes

LS CABLES

KOREA, Republic of

Yes

PREVIOUSLY LG

MOHAMMAD AL OJAIMI FACTORY

Saudi Arabia-RIYADH

Yes

PAD MOUNTED STAINLESS STEEL BOXES AND UNDER GROUND


FIBER GLASS BOXES UP TO 132KV ACCEPTABLE. EXTENDED
GUARANTEE FOR 10 YEARS FOR THE FIRST SUPPLY AND IT
WILL BE REDUCED YEARLY IN CASE OF FUTURE PROJECT
AWARDS.

NEXANS

FRANCE

Yes

PIRELLI

GERMANY-BERLIN

Yes

Power and Telecommunication Equipments


Factory (P.T.E. Co.) (CEPCO)

Saudi Arabia-Jeddah

Yes

STEINER

GERMANY

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

Based on TS&SD fax ref# 09-00396-1-03032301 dated


17/02/2009 P.T.E is prequalified for Link Boxes rated up to
380kV.
* (10) years extended warranty.

Total =

14 . 5

SHEATH VOLTAGE LIMITERS (SVL)

14. 5. 0

SHEATH VOLTAGE LIMITERS (SVL)

14

Applicable Standards:
ABB

SWEDEN

Yes

AK POWER SOLUTONS PTY LTD

AUSTRALIA-Huntingwood, NSW

Yes

Previously HAYCOLEC SWITCHGEAR PTY Australia-NSW [The


name has been changed to AK POWER SOLUTONS PTY LTDAustralia- Huntingwood, NSW based on S&SD/P&SFD letter #
13-07444-30504401 dated December 11, 2013 and based on AK
POWER SOLUTONS PTY LTD- Australia-NSW-Huntingwood Letter
# NG251113 dated November 25, 2013].
Total =

14 . 6

EARTHING BONDING CABLE

14. 6. 0

EARTHING BONDING CABLE

Applicable Standards:
FUJIKURA VISCAS CORP

JAPAN

Yes

J-POWER SYSTEM CORP.

JAPAN

Yes

LS CABLES

KOREA, Republic of

Yes

PIRELLI

GERMANY-BERLIN

Yes

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

SAUDI MODERN CO. (RIYADH CABLES)

Saudi Arabia- RIYADH

Yes

PREVIOUSLY LG

Page 68 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Total =

15

FIBER OPTIC CABLE

15 . 1

NON-METALLIC FIBER OPTIC (F/O) CABLE & ACCESSORIES

15. 1. 0

NON-METALLIC FIBER OPTIC (F/O) CABLE & ACCESSORIES

Applicable Standards:

48-TMSS-02

AFL TELECOMMUNICATIONS EUROPE LTD

United Kingdom--

Yes

PREVIOUSLY ALCOA FUJIKURA LTD. (AFL)

ALCATEL

SWEDEN

Yes

B.V.TWENTSCHE KABELFABRIEK

NETHERLANDS- NAAKSBERGEN

Yes

BICC

United Kingdom

Yes

BRUGG TELECOM AG

SWITZERLAND

Yes

CORNING CABLES

United Kingdom-PRESCOT

Yes

DRAKA NK

FINLAND

Yes

ERICSON

SWEDEN

Yes

FUJIKURA LTD.

JAPAN

Yes

FURUKAWA

JAPAN

Yes

HITACHI

JAPAN

Yes

INDUSTRIAS ARRUTI

SPAIN

Yes

ONLY ACCESSORIES

LS

KOREA, Republic of

Yes

PREVIOUSLY LG

MIDDLE EAST OPTIC FIBER & CABLE


MANUFACTURING CO. (MEFC)

Saudi Arabia-RIYADH

Yes

MIDDLE EAST SPECIALIZED CABLE (MESC)

Saudi Arabia-Riyadh

Yes

NKF KABEL B.V.

NETHERLANDS

Yes

NOKIA

FINLAND

Yes

ACCESSORIES ONLY

ACCESSORIES ONLY

Page 69 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Oman Fiber Optic Cable Company

FACTORY LOCATION
Oman-Rusayl

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter# 10-00909-2-03032300 dated April 06,
2010. It is pre-qualified for Non Metallic Fiber Optic Cable per
SEC Specification 48-TMSS-02, Rev.0 with the following
conditions:
Type Test: The first batch of each type of Non Metallic Fiber
Optic Cable to be supplied to SEC shall be type tested per
relevant International and SEC Specifications in presence of
three (3) SEC Engineers and one (1) SEC approved IIA Inspector
and all cost pertaining to the test shall be borne by the
Manufacturer as confirmed through Letter# Nil dated September
12, 2009.
Extended Warranty: Ten (10) year Extended Warranty shall be
applicable for all supplies made by Oman Fiber Optic Cable
Company to SEC as confirmed through Letter# EU.SEC.PQ.01
dated June17, 2009.

OPTOKON

CZECH REPUBLIC-Jihlava

Yes

ONLY FOR THE FOLLOWING ACCESSORIES


1 Standard 19 rack (ROV Series) and 23" rack
2 Standard 19" rack Mount Fiber Optic Patch Panel type MCNP &
MFDC consisting of 12/24/36/48 Ports
3 Fiber Optic Wall Mount Box type MPIC consisting of
12/24/36/48 Ports
4 Fiber Storage Shelf type MFSS
5 Optical Pig Tails/Patch Chords equipped with FC/PC & E2000
Connectors

PIRELLI

ITALY

Yes

PRYSMIAN TELECOM

SPAIN

Yes

PREVIOUSLY "PIRELLI"

R & M Reichle & De-Massari AG

SWITZERLAND-Wetzikon

Yes

Based on S&SD Letter 13-02127-030504401 dated May 19,


2013, R & M Reichle & De-Massari AG, Wetzikon, Switzerland is
pre-qualified for "Accessories only" fiber optic and copper
passive components (Structure Cabling) as conforming to
National Grid SA specification # 01-TMSS-01, Rev.01, with the
following conditions:
Five (5) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by R
& M Reichle & De-Massari AG, Wetzikon, Switzerland through
their letter #Nill dated June 10, 2013.

RIYADH CABLES

Saudi Arabia-RIYADH

Yes

RIYADH TELEPHONE CABLES CO.

Saudi Arabia-RIYADH

Yes

Page 70 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SAUDI CABLE

FACTORY LOCATION
Saudi Arabia-JEDDAH

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 12-03896-30504401 dated November 10,
2012, SAUDI CABLE Co. - Saudi Arabia-Jeddah is pre-qualified
for Non-Metallic Fiber Optic Cable (F/O) Cable & Accessories as
conforming to SEC Specification # 48-TMSS-02, Rev.0, with the
following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or the date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 12, 2011.

SIEMENS

GERMANY

Yes

SUMITOMO

JAPAN-YOKOHAMA

Yes

TE Connectivity Ltd.

United States--

Yes

Based on S&SD Letter 12-03688-01-30504401 dated January


03, 2012. The name of the manufacturer has been changed
from ADC- United States to TE Connectivity Ltd.-United States.

TELECT

Poland-Wroclaw

Yes

based on TS&SD letter# 09-01095-03032301 dated 18th. April


2009 for the following accessories:
- Management Rack E-9000 series
- Distribution & Termination Unit LCX.
- Wall mounted unit LanLinxs.
Total =

16

29

PILOT WIRE CABLES & ACCESSORIES

16 . 0
16. 0. 0

Applicable Standards:

PILOT WIRE CABLES & ACCESSORIES

48-TMSS-01,48-TMSS-03,48-TMSS-04,48-TMSS-05

DEMIRER KABLO

TURKEY

Yes

CABLE & ACCESSORIES

GOLDSTAR CABLE

KOREA, Republic of

Yes

UP TO 100 PAIRS

JEDDAH CABLE CO.

Saudi Arabia-JEDDAH

Yes

KERPENWORK

GERMANY

Yes

CABLE & ACCESSORIES

LS CABLES

KOREA, Republic of

Yes

PREVIOUSLY LG

MIDDLE EAST SPECIALIZED CABLE (MESC)

Saudi Arabia-Riyadh

Yes

RIYADH CABLES

Saudi Arabia-RIYADH

Yes

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

SIEMENS

GERMANY

Yes

STEINER

GERMANY

Yes

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

CABLE & ACCESSORIES

Page 71 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Total =

17

11

SHIELDED CABLE FOR INSTRUMENTATION

17 . 0
17. 0. 0

Applicable Standards:

SHIELDED CABLE FOR INSTRUMENTATION


ALPHA

United States

Yes

AT & T

United States-NEW YORK

Yes

BELDEN

United States

Yes

MIDDLE EAST SPECIALIZED CABLE (MESC)

Saudi Arabia-Riyadh

Yes

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

Based on TS&SD fax ref.#08-02969-3-03032301 dated


07/01/2009. Pre-Qualified for Shielded Instrumentation &
Thermocouple Cables with this conditions:
-First batch shall be type, designe, special, acceptance & routine
tests in the factory test laboratory in presence of (3) SEC
engineers & (1) independent inspector.
-(10) years warranty

TEKAB Co. Ltd.

United Arab Emirates-Sharjah

Yes

APPROVED FOR CABLES WITHOUT METALLIC SHEATH; TYPE


TEST CERTIFICATE FROM INDEPENDENT LAB TO BE
SUBMITTED FOR 1ST ORDER; EXTENDED QUARANTEE FOR 10
YEARS.
Total =

18

POWER /OR CONTROL CABLE (0.6/1KV)

18 . 0
18. 0. 0

Applicable Standards:

POWER /OR CONTROL CABLE (0.6/1KV)


ALFANAR ELECTRICAL SYSTEMS

Saudi Arabia-RIYADH

Yes

BELDEN

United States

Yes

ELSEWEDY EGYTECH CABLE CO.

EGYPT--

Yes

JEDDAH CABLE CO.

Saudi Arabia-JEDDAH

Yes

11-TMSS-10
Based on TS&SD letter# 09-01432-03032301 dated 16th. May
2009 is pre-qualified for Low Voltage Power & Control Cables
0.6/1kV as conforming to SEC specifications # 11-TMSS-10,
rev.0 with the following conditions:

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.
based on TS&SD fax ref# 09-00303/01-03032301 dated
18/02/2009.

Page 72 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

JORDAN NEW CABLE COMPANY

JORDAN-AMMAN

Pre-Qualified
Manufacturers
By SEC
Yes

MIDDLE EAST SPECIALIZED CABLE (MESC)

Saudi Arabia-Riyadh

Yes

OMAN CABLE INDUSTRIES

MUSCAT--

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

Based on TS&SD letters # 10-02435-03032301 dated


06/09/2010 & 10-02611-03032301 dated 02/10/2010, it is
pre-qualified for LV Power& Control Cables (0.6/1kV) rating as
confirming to SEC specification # 11-TMSS-10,Rev.0, with the
following condition:

Ten (10) years extended warranty for the proposed LV


Power& Control Cables from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order. This was confirmed by Oman
Cables Industry through letter # Nil dated 21/08/2010.

RIYADH CABLES

Saudi Arabia-RIYADH

Yes

SAUDI CABLE

Saudi Arabia-JEDDAH

Yes

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

TEKAB Co. Ltd.

United Arab Emirates-Sharjah

Yes

Based on S&SD letter# 13-07588-30504401 dated December


11, 2013, it is pre-qualified for Power and/or Control Cable
Copper 600/1000 V Rating as conforming to National Grid SA
specification # 11-TMSS-10, Rev.01, with the following
conditions:
It is pre-qualified for All LV power & control cables with copper
conductor except clause 4.3.5 point a.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer TEKAB Co. Ltd, UAE
through their letter # 0580/SO/13 dated November 17, 2013.
Total =

19

11

CONDUCTOR FITTINGS/CABLE ACCESSORIES

19 . 1

CABLE SPLICE & TERMINATION KITS UP TO 132 KV

19. 1. 1

CABLE SPLICE & TERMINATION KITS UP TO 132 KV

Applicable Standards:

---

Yes

ABB

SWITZERLAND

Yes

BRUGG CABLE

SWITZERLAND

Yes

12-TMSS-10
APPROVED POWER CABLE MANUFACTURERS UP TO 132KV ARE
ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS
OF THE SAME RATING

Page 73 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

DAITWEILER

United Kingdom

Pre-Qualified
Manufacturers
By SEC
Yes

ELASTIMOLD

United States

Yes

FUJIKURA VISCAS CORP

JAPAN

Yes

G&W

United States

Yes

J-POWER SYSTEM CORP.

JAPAN

Yes

LS CABLES

KOREA, Republic of

Yes

NEXAN

SWITZERLAND

Yes

PFISTERER IXOSIL

SWITZERLAND

Yes

PIRELLI

GERMANY-BERLIN

Yes

RAYCHEM

GERMANY

Yes

RAYCHEM

Saudi Arabia-DAMMAM

Yes

TAIHAN ELECTRIC WIRE COMPANY

KOREA, Republic of

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

SUSPENDED FOR ALL ONGOING & FUTURE PROJECTS DUE TO


FREQUENT FAILURE & VERY POOR FOLLOWUP RESPONSE
FROM THE MANUFACTURER.
PREVIOUSLY LG

PREVIOUSLY SEFAG IXOSIL

LIMITED TO 69KV ONLY. UNDER THE GROUP OF TYCO

Total =

19 . 2

CABLE SPLICE & TERMINATION KITS UP TO 230 KV

19. 2. 1

CABLE SPLICE & TERMINATION KITS UP TO 230 KV

Applicable Standards:

---

Yes

ABB

GERMANY

Yes

12-TMSS-10
APPROVED 230 KV POWER CABLE MANUFACTURERS ARE ALSO
ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS
OF THE SAME RATING

Total =

19 . 3

CABLE SPLICE & TERMINATION KITS UP TO 380 KV

19. 3. 0

CABLE SPLICE & TERMINATION KITS UP TO 380 KV

Applicable Standards:

---

Yes

J-POWER SYSTEM CORP.

JAPAN

Yes

LS

KOREA, Republic of

Yes

15

12-TMSS-10
APPROVED 380 KV POWER CABLE MANUFACTURERS ARE ALSO
ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS
OF THE SAME RATING
PREVIOUSLY LG
Total =

Page 74 of 190

SER

20

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

CONNECTORS, OVERHEAD LINE COMPRESSION TYPE

20 . 0
20. 0. 0

Applicable Standards:

CONNECTORS, OVERHEAD LINE COMPRESSION TYPE


A SALVI & C SPA

ITALY-MILANO

Yes

ALCOA

United States

Yes

BURNDY

United States

Yes

CAROBENI

ITALY

Yes

DALEKOVOD PROIZVODNJA

Croatia/Hrvatska-Zagreb

Yes

12-TMSS-02

Based on TS&SD fax # 10-01179-03032301 dated April 20,


2010, this manufacturer is pre-qualified for Compression Type
Connectors for O/H T/L per 12-TMSS-02, Rev.0 with the
following conditions:
Each new design of Compression Type Connectors for O/H T/L
which has NOT been type tested/supplied to SEC before, shall be
type tested as per 12-TMSS-02.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order.
Previously DALEKOVOD Croatia.[The name has been changed
based on S&SD/P&SFD letter # 12-01292-30504401 dated April
10, 2012]

ELASTIMOLD

United States

Yes

HOMAC

United States

Yes

INDUSTRIAS ARRUTI

SPAIN

Yes

ISELFA

ITALY

Yes

Page 75 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Lorunser Austria GmbH

FACTORY LOCATION
SLOVAKIA-ML Production Myjava

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter# 13-062982-2-30504401 dated
December 04, 2013, it is pre-qualified for Substation Connectors
as conforming to National Grid SA specification # 12-TMSS-02
Rev. 01, with the following conditions:
Fresh type tests shall be conducted on any new type of
connectors (other than the six 6 types listed below) in the
presence of three (03) SEC/National Grid SA engineers and one
(01) SEC/National Grid SA approved independent inspection
agency (IIA) Inspector in an accredited laboratory and all cost
pertaining to these tests shall be borne by the manufacturer.
This was confirmed in writing by the manufacturer through their
letter # Nil dated November 02, 2009.
a. AL-T-Connector: 1AB012-002-031.
b. AL-Straight- Duplex Connector: 1FA017-012-008.
c. AL-Straight- Bundle Connector: 1FA080-033-001.
d. AL-T-Type Connector: 1FB101-002-002.
e. AL-Bus-Support: 1JB008-160-004.
f. AL-Welded-Flat Terminal: 1CB082-010-002.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated November 02, 2009.

MOSDORFER

AUSTRIA

Yes

PFISTERER

SWITZERLAND

Yes

PREVIOUSLY SEFAG AG

PFISTERER

SWEDEN

Yes

PREVIOUSLY SEFAG

SA_RA Energy, Construction, Trade and


Industry Co. Inc.

TURKEY-Ankara (Polatli Plant) &

Yes

Based on TS&SD fax ref.#09-00087-03032301 dated


11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure,
Line Hardware and Compression Type Connector for T/L O/H
upto 380kV except Space Damper upto 230kV with the following
conditions: -All tests shall be carried out in presence of (3) SEC
engineers. -(10) years warranty

SICAMEX

FRANCE-FEUGEROLLE &

Yes

SM-CI

FRANCE--

Yes

PREVIOUSLY AS FCI(SAAE), FRANCE.


Total =

16

Page 76 of 190

SER

21

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

INSULATORS

21 . 1

PORCELAIN INSULATORS

21. 1. 1

STATION POST INSULATOR PORCELAIN, UP TO 132 KV, 230 KV and 380 KV

Applicable Standards:

15-TMSS-01

DIELVE

ITALY

Yes

Approved Only Up To 132 KV Only

LAPP

GERMANY-ROSENTHAL

Yes

LAPP

United States

Yes

NGK

JAPAN

Yes

PPC INSULATORS

AUSTRIA

Yes

Based on TS&SD/ESD e-mail dated 07/07/2010 and PPC


Insulators (Austria) Letter # Nil dated 4th July 2010, it is
pre-qualified for Station Post Insulator Porcelain, up to 132kV,
230kV&380kV as confirming to SEC specification # 15-TMSS-01,
Rev.0 with the following conditions:
A) Type tests conducted in presence of SEC Engineers on
132kV-10.9KN (Drawing # 124-11740-132-101), 230kV-10.3KN
(Drawing # 124-11850-132-101) and 380kV-12KN (Drawing #
124-11860-132-101 & 124-11870-132-801) Insulators.
B) Any new type of Insulators (other than the types which are
mentioned in A) offered by PPC shall Type Tested in presence of
three (3) SEC Engineers and one (1) Approved Independent
Agency Inspector.
C) Ten (10) years warranty from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order.

SIEMENS

GERMANY

Yes

W.S.I

INDIA

Yes

Approved Only Up To 132 KV Only


Total =

21. 1. 2

Applicable Standards:

OHL PORCELAIN INSULATOR UP TO 380 KV


CERAMTEC

GERMANY-N/A

Yes

DIELVE

ITALY

Yes

LAPP

GERMANY-ROSENTHAL

Yes

NGK

JAPAN

Yes

SIEMENS

GERMANY

Yes

15-TMSS-02,15-TMSS-03

Page 77 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Total =

21. 1. 3

Applicable Standards:

LONG ROD PORCELAIN INSULATORS UP TO 380 KV


LAPP

GERMANY-ROSENTHAL

Yes

NGK

JAPAN

Yes

PPC INSULATORS (ELEKTROKERAMIK


SONNEBERG)

GERMANY

Yes

15-TMSS-04

Based on TS&SD/ESD e-mail dated 07/07/2010 and PPC


Insulators (ELEKTROKERAMIK SONNEBERG, Germany) Letter #
Nil dated 4th July 2010, it is pre-qualified for Long Rod Porcelain
Insulators up to 380kV as confirming to SEC specification #
15-TMSS-04, Rev.01 with the following conditions:
A) Type tests conducted in presence of SEC Engineers on
160KN:LG75/18+17/1450 (Drawing # 11134-339900-B) and
330KN: LG105/18+17/1545 (Drawing # 11134-621400-A)
Insulators.
B) Any new type of Insulators (other than the types which are
mentioned in A) offered by PPC shall Type Tested in presence of
three (3) SEC Engineers and one (1) Approved Independent
Agency Inspector.
C) Ten (10) years warranty from the date of PAC of the first
turnkey project in case of contract award or date of first delivery
in case of direct material supply order.

SIEMENS

GERMANY

Yes
Total =

21 . 2

OHL GLASS INSULATOR UP TO 380KV

21. 2. 0

OHL GLASS INSULATOR UP TO 380KV

Applicable Standards:

15-TMSS-02

SEDIVER

BRAZIL--

Yes

COMPLETE SAMPLE, TYPE & ROUTINE TESTS FOR THE FIRST


ORDER IS REQUIRED.

SEDIVER

ITALY

Yes

Complete Sample, Type & Routine Tests for the first order is
required.

Page 78 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SGD LA GRANJA VIDRIERIA, S.L.

FACTORY LOCATION
SPAIN-Segovia

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter# 13-07206-01-30504401 dated
November 09, 2013, it is pre-qualified for Glass Insulator as
conforming to National Grid SA specification # 15-TMSS-02 ,
Rev.01, with the following conditions:
Fresh type tests shall be conducted on each type of Insulators
per clause 5.1 of 15-TMSS-02 Rve.01 and relevant international
standards in the presence of three (03) SEC/National Grid SA
engineers and one (01) SEC/National Grid SA approved
independent inspection agency (IIA) Inspector in an
Independent laboratory and all cost pertaining to these tests
shall be borne by the manufacturer. This was confirmed in
writing by the manufacturer through their letter # Nil dated
November 08, 2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated November 08, 2012.
Total =

21 . 3

OHL COMPOSITE INSULATORS

21. 3. 1

OHL COMPOSITE INSULATORS UP TO 230KV

Applicable Standards:

E.B.REBOSIO S.r.L

ITALY

Yes

FCI (FURUKAWA COMPOSITE INSULATORS


LTD)

HUNGARY-BUDAPEST

Yes

LAPP

GERMANY-ROSENTHAL

Yes

MACLEAN POWER SYSTEM

United States-ILLINOIS

Yes

NGK LOCKE INC.

United States

Yes

15-TMSS-05
Up To 132 kV only. Complete Type, Routine / Sample tests for
first order & 10 Years Warranty from the date of PAC is required.

Page 79 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
PFISTERER SEFAG AG

FACTORY LOCATION
SWITZERLAND

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
It is pre-qualified for Composite Suspension & Tension insulators
up to 380 kV, Composite Line Post insulators up to 132 kV per
SEC Specification 15-TMSS-05, Rev.0 with the following
conditions based on TS&SD letter# 10-02374-03032301 dated
August 18, 2010:
A) Type Tests have been conducted in presence of SEC
Engineers on:
110KV, 120KN (Drawing # 138 206 -393A) and 160KN
(Drawing # 138 206 -667A) at 40 kA.
380KV, 160KN (Drawing # 138 206 -588BC) at 50kA.
However, the manufacturer shall perform the Power Arc Test
only at 63kA.
B) Any new type of Insulators (other than the types which are
mentioned in A) offered by PFISTERRER SEFAG AG
Switzerland shall be Type Tested in presence of three (3) SEC
Engineers and one (1) Approved Independent Agency Inspector.
C) Ten (10) years warranty from the date of PAC.

XIANGFAN GUOWANG

CHINA--

Yes

MOLDED DESIGN ONLY; UPTO 132KV ONLY; ALL THE


TYPE/SPECIAL / ROUTINE TESTS TO BE CARRIED OUT FOR
FIRST CONTRACT/PROJECT AT SEC APPROVED INDEPENDENT
LAB IN PRESENCE OF 3 SEC ENGRS & A THIRD PARTY
INSPECTOR APPROVED BY SEC; 10 YEARS EXTENDED
WARRANTY
Total =

21. 3. 2

OHL COMPOSITE INSULATORS UP TO 380KV

Applicable Standards:

15-TMSS-05

LAPP

GERMANY-ROSENTHAL

Yes

FIRST BATCH OF EVERY NEW TYPE OF 380KV INSULATOR TO


BE TYPE TESTED IN PRESENCE OF 3 SEC ENGINEERS AND ONE
SEC APPROVED INDEPENDENT INSPECTOR; EXTENDED
WARRANTY OF 10 YEARS

MACLEAN POWER SYSTEM

United States-ILLINOIS

Yes

*All type/design & special tests were performed for first batch at
Independent lab. in presence of SEC/IIA Inspectorbased on
TS&SD fax#09-F00306-030323001 dated 17/02/2009.
-Extended 10(ten) year guarantee/warranty is required.

Page 80 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
NGK LOCKE

FACTORY LOCATION
United States

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 10-F02356/02-03032301 dated
22/11/2010, it is pre-qualified for 380kV Composite Insulators
with the following conditions:

Manufacturer shall conduct/repeat the following tests on


the 380kV Composite Insulators 160kN, Cat.# 402-SL1370-SK95 using test series X (Note: Type tests using test series Y on
the 380kV Composite Insulators,160kN , Cat.# 402-SL1370-SK95 have already been conducted satisfactory by the
manufacturer in the presence of SEC engineers).
1. Power Arc Test (by using test series X) as per IEC 61467.
2. High Pressure Water Withstand Test followed by Electrical
Test and Verification of the Specified Mechanical Load (SML) as
per IEC 61109

Any new type of composite insulator (other than type Cat.


# 402-SL1370-SK-95) offered by NGK Locke Polymer Insulators
Inc.(USA) shall be subjected to all type, special ,sample and
routine tests as per SEC standards specifications in the presence
of three (03) SEC engineers & one (01) SEC approved
independent inspection agency(IIA) Inspector.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order.

PFISTERER SEFAG AG

SWITZERLAND

Yes

It is pre-qualified for Composite Suspension & Tension insulators


up to 380 kV, Composite Line Post insulators up to 132 kV per
SEC Specification 15-TMSS-05, Rev.0 with the following
conditions based on TS&SD letter# 10-02374-03032301 dated
August 18, 2010:
A) Type Tests have been conducted in presence of SEC
Engineers on:
110KV, 120KN (Drawing # 138 206 -393A) and 160KN
(Drawing # 138 206 -667A) at 40 kA.
380KV, 160KN (Drawing # 138 206 -588BC) at 50kA.
However, the manufacturer shall perform the Power Arc Test
only at 63kA.
B) Any new type of Insulators (other than the types which are
mentioned in A) offered by PFISTERRER SEFAG AG
Switzerland shall be Type Tested in presence of three (3) SEC
Engineers and one (1) Approved Independent Agency Inspector.
C) Ten (10) years warranty from the date of PAC.
Total =

22

LINE INSULATOR HARDWARE FITTINGS

Page 81 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

22 . 1

HARDWARE FITTINGS

22. 1. 0

HARDWARE FITTINGS

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

Applicable Standards:
A B CHANCE

United States-Centralia, MO

Yes

A SALVI & C SPA

ITALY-MILANO

Yes

ALCOA

United States

Yes

CAROBENI

ITALY

Yes

DALEKOVOD PROIZVODNJA

Croatia/Hrvatska-Zagreb

Yes

REMARKS

12-TMSS-01

Based on TS&SD fax # 10-01179-03032301 dated April 20,


2010, this manufacturer is pre-qualified for Line Hardware
except Spacer Dampers per 12-TMSS-01, Rev.0 with the
following conditions:
Each new design of hardware which has NOT been type
tested/supplied to SEC before, shall be type tested as per
12-TMSS-01.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order.
Previously DALEKOVOD Croatia.[The name has been changed
based on S&SD/P&SFD letter # 12-01292-30504401 dated April
10, 2012]

DAMP

ITALY

Yes

DERVAUX

FRANCE

Yes

INDUSTRIAS ARRUTI

SPAIN

Yes

ISELFA

ITALY

Yes

JOSLYN

United States

Yes

MOSDORFER GMBH

AUSTRIA-WEIZ

Yes

PFISTERER

SWEDEN

Yes

PREVIOUSLY SEFAG

PFISTERER

SWITZERLAND

Yes

PREVIOUSLY SEFAG AG

PREFORMED LINE PRODUCTS (PLP)

United States

Yes

SA_RA Energy, Construction, Trade and


Industry Co. Inc.

TURKEY-Ankara (Polatli Plant) &

Yes

SICAMEX

FRANCE-FEUGEROLLE &

Yes

Previously "SM-CI-France", the name has been change to


DERVAUX-France based on DERVAUX-France letter # Nil dated
13/10/2009.

Based on TS&SD fax ref.#09-00087-03032301 dated


11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure,
Line Hardware and Compression Type Connector for T/L O/H
upto 380kV except Space Damper upto 230kV with the following
conditions: -All tests shall be carried out in presence of (3) SEC
engineers. -(10) years warranty

Page 82 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

22 . 2

OBSTRUCTION MARKERS AND CONDUCTOR LIGHTING

22. 2. 0

OBSTRUCTION MARKERS AND CONDUCTOR LIGHTING

23

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

Applicable Standards:

BP SOLAR ARABIA LTD

Saudi Arabia

Yes

DERVAUX

FRANCE

Yes

OBSTA

FRANCE

Yes

P&R TECHNOLOGIES

United States

Yes

PFISTERER SEFAG

SWITZERLAND

Yes

SHIN SEONG IND CORP.

KOREA, Republic of

Yes

SM-CI

FRANCE--

Yes

TANA WIRE MARKER

United States

Yes

REMARKS
Total =

16

Total =

12-TMSS-03

PREVIOUSLY SEFAG AG

PREVIOUSLY AS FCI(SAAE), FRANCE.

LINE SUPPORT STRUCTURE

23 . 1

SUBSTATION STEEL STRUCTURE (LATTICED)

23. 1. 0

SUBSTATION STEEL STRUCTURE (LATTICED)


AL BABTAIN

Applicable Standards:
Saudi Arabia-RIYADH

20-TMSS-01

Yes

Page 83 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Al Yamamah Electric Powers Factory

FACTORY LOCATION
Saudi Arabia-Jeddah

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 11-03472-03032301 dated
09/01/2011, it is pre-qualified for Substation Steel Structure
(Latticed) up to 132kV as confirming to SEC specification #
20-TMSS-01, Rev.0 with the following conditions:

Any Substation Steel Structure (Latticed) of new design


proposed by Al-Yamamah Electric Power Towers Factory, Jeddah
(except for the pervious approved design and drawings
provided by SEC to the manufacturer) shall be subjected to
full-scale loading tests and other type, routine and special tests
as per SEC standards specifications and relevant International
Standards in the presence of three (03) SEC engineers & one
(01) SEC approved independent inspection agency (IIA)
Inspector and all cost pertaining to the tests shall be borne by
the manufacturer.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed in
writing by Al-Yamamah Electric Power Towers Factory, Jeddah
through letter # Nil dated 21st October 2009.

AL ZAMIL STEEL

Saudi Arabia-DAMMAM

Yes

AL-BABTAIN POWER&TELECOM CO.

EGYPT-N/A

Yes

FIRST LOT OF EACH TYPE OF STRUCTURE SHALL BE TYPE


TESTED IN AN INDEPENDENT LAB IN PRESENCE OF SEC
ENGINEERS; 10 YEARS EXTENDED WARRANTY.

Alfanar Steel

Saudi Arabia-Riyadh

Yes

Based on TS&SD letter# 08-1058/1-03032301 dated 25th May


2009 it is pre-qualified for Transmission Towers for projects up
to 132kV, Substation & Gantry Steel Structures up to 380kV and
Communications Tower for transmission sector as confirming to
SEC specification # 20-TMSS-01, rev.0 with the following
conditions:

All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in the manufacturer's testing laboratory in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

ARABIAN INTERNATIONAL CO.

Saudi Arabia-JEDDAH

Yes

Page 84 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Energya Steel Solution (Hesham Helal El
Sewedy & Partners for Steel Industries Co.)

FACTORY LOCATION
Saudi Arabia-Rabigh

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter# 09-2179/07-03032301 dated November
11, 2009, approval of Executive Directive for TS&SD letter#
09-02179/06-03032301 dated November 11, 2009 & based on
S&SD letter# 13-01978/01-30504401 dated June 10, 2013, it is
pre-qualified for Substation Steel Structures up to 380kV as
conforming to National Grid SA specification # 20-TMSS-01,
Rev.01 with the following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery in case of direct material supply order.

GEYARD FOR COMMERCE AND IMPORT CO.

Saudi Arabia-AL KHOBAR

Yes

HIDADA

Saudi Arabia-JEDDAH

Yes

KEC INTERNATIONAL LTD.

INDIA--

Yes

LARSEN & TOUBRO LTD.

INDIA-CHENNAI

Yes

NAJEM

Saudi Arabia

Yes

SA_RA Energy, Construction, Trade and


Industry Co. Inc.

TURKEY-Ankara (Polatli Plant) &

Yes

NAGPUR-BUTIPORI, JABALPUR, JAIPUR PLANTS ARE


ACCEPTABLE; ALL THE TESTS SHALL BE CARRIED OUT FOR
FIRST CONTRACT/PROJECT IN PRESENCE OF THREE (3) SEC
ENGINEERS; 10 YEARS OF EXTENDED WARRANTY.

Based on TS&SD fax ref.#09-00087-03032301 dated


11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure,
Line Hardware and Compression Type Connector for T/L O/H
upto 380kV except Space Damper upto 230kV with the following
conditions: -All tests shall be carried out in presence of (3) SEC
engineers. -(10) years warranty
Total =

23 . 2

T/L STEEL STRUCTURE (LATTICED) UP TO 380 KV

23. 2. 0

T/L STEEL STRUCTURE (LATTICED) UP TO 380 KV


AL BABTAIN

Applicable Standards:
Saudi Arabia-RIYADH

13

20-TMSS-01

Yes

Page 85 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Al Yamamah Electric Powers Factory

FACTORY LOCATION
Saudi Arabia-Jeddah

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter # 13-05834-30504401-01 dated
September 29, 2013 and letter # 12-0054-30504401 dated
January 10, 2012 Al-Yamamah Electric Power Towers Factory,
Jeddah is prequalified for Transmission Line Structures up to 380
kV as conforming to National Grid SA Specification #
20-TMSS-01, Rev.0 with the following conditions:
Any new transmission Line Structure (Latticed) designed by
Al-Yamamah Electric Power Towers Factory, Jeddah (except
other than previous approved design and drawings provided by
SEC/National Grid SA to the manufacturer) shall be subjected to
full scale loading tests and other type, routine & special tests as
per SEC/National Grid SA Standards Specifications and relevant
International Standards in the presence of three (03)
SEC/National Grid SA engineers and one (01) SEC/National Grid
SA approved independent inspection agency (IIA) Inspector and
all cost pertaining to these tests shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # Nil dated January 07, 2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated October 21, 2009 and letter # Nil dated January 07,
2012.

AL ZAMIL STEEL

Saudi Arabia-DAMMAM

Yes

AL-BABTAIN POWER&TELECOM CO.

EGYPT-N/A

Yes

FIRST LOT OF EACH TYPE OF STRUCTURE SHALL BE TYPE


TESTED IN AN INDEPENDENT LAB IN PRESENCE OF SEC
ENGINEERS; 10 YEARS EXTENDED WARRANTY.

Alfanar Steel

Saudi Arabia-Riyadh

Yes

Based on TS&SD letter# 08-1058/1-03032301 dated 25th May


2009 it is pre-qualified for Transmission Towers for projects up
to 132kV, Substation & Gantry Steel Structures up to 380kV and
Communications Tower for transmission sector as confirming to
SEC specification # 20-TMSS-01, rev.0 with the following
conditions:

All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in the manufacturer's testing laboratory in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

AL-SALAM INSDUTRIES AND TRADING


EST./ADVANCE TECHNOLOGIES.

Saudi Arabia-JEDDAH

Yes

ONE TRIAL PROJECT FOR 110/132 KV SHORT LINE.

ARABIAN INTERNATIONAL CO.

Saudi Arabia-JEDDAH

Yes

Page 86 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Energya Steel Solution (Hesham Helal El
Sewedy & Partners for Steel Industries Co.)

FACTORY LOCATION
Saudi Arabia-Rabigh

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter# 09-2179/07-03032301 dated November
11, 2009 & based on S&SD letter# 13-01978/01-30504401
dated June 10, 2013, it is pre-qualified for Transmission Line
Steel Structures and Communication Towers as conforming to
National Grid SA specification # 20-TMSS-01, Rev.01 with the
following conditions:
The approval will be initially restricted to the following items
only:
1. Transmission Towers for projects up to 132kV
2. Communication Towers for Transmission Sector
Any Transmission Line Structure (Latticed) of new design
proposed by ENERGYA Steel Solutions, Rabigh (except for the
pervious approved design and drawings provided by SEC/
National Grid SA to the manufacturer) shall be subjected to
full-scale loading tests and other type, routine and special tests
as per National Grid SA standards specifications and relevant
International Standards in the presence of three (3)
SEC/National Grid SA engineers & one (1) National Grid SA
approved independent inspection agency (IIA) Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery in case of direct material supply order.

HIDADA

Saudi Arabia-JEDDAH

Yes

KALPATARU Power Transmission Ltd.

INDIA-Gujarat

Yes

Based on TS&SD letter 09-00665/1-03032301 dated 16th. March


2009 for Galvanised Transmission line Lattice Steel Tower up to
380kV as conforming to SEC specifications # 20-TMSS-01, rev.0;
with the following conditions:

Ten (10) years extended warranty.

Improvement needs indicated in the plant survey report.

All the tests shall be carried out for first contract/project in


presence of three (3) sec engineers & independent Inspector.

KEC INTERNATIONAL LTD.

INDIA--

Yes

Only NAGPUR-BUTIPORI, JABALPUR & JAIPUR Plants are


acceptable.
Any new transmission line structure designed by KEC, India
shall be subjected to full-scale loading tests and other
type/routine/sample tests per SEC specifications in the presence
of three (3) SEC engineers and one (1) SEC approved
Independent Inspection Agency (IIA) inspector and all costs
pertaining to tests shall be borne by the manufacturer.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of delivery
in case of first direct material supply order.

Page 87 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

LARSEN & TOUBRO LTD.

INDIA-CHENNAI

Pre-Qualified
Manufacturers
By SEC
Yes

SA_RA Energy, Construction, Trade and


Industry Co. Inc.

TURKEY-Ankara (Polatli Plant) &

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

Based on TS&SD fax ref.#09-00087-03032301 dated


11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure,
Line Hardware and Compression Type Connector for T/L O/H
upto 380kV except Space Damper upto 230kV with the following
conditions: -All tests shall be carried out in presence of (3) SEC
engineers. -(10) years warranty
Total =

23 . 3

STEEL POLES, TUBULAR UP TO 230 KV

23. 3. 0

STEEL POLES, TUBULAR UP TO 230 KV

Applicable Standards:

AL BABTAIN

Saudi Arabia-RIYADH

Yes

Energya Steel Solution (Hesham Helal El


Sewedy & Partners for Steel Industries Co.)

Saudi Arabia-Rabigh

Yes

13

20-TMSS-02

Based on TS&SD Letter # 10-0331/06-03032301 dated


28/06/2010, it is pre-qualified for Steel Poles, Tubular up to
230kV as confirming to SEC specification # 20-TMSS-02. Rev.0
with the following conditions:

All Type, Routine and Special Tests including the load test
per SEC specification # 20-TMSS-02 and all relevant
International Standards shall be conducted on the first batch in
presence of three (3) SEC Engineers and one (1) SEC approved
independent inspection agency (IIA) Inspector and related cost
pertaining to the test shall be borne by Hesham Helal EL Sewedy
& Partners for Steel Industries Co.(Energya Steel Solutions) as
confirmed by manufacturer through letter # SEC/WK/100524
dated 24th May 2010.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order as confirmed by Hesham
Helal EL Sewedy & Partners for Steel Industries Co.(Energya
Steel Solutions) letter # SEC/WK/100524 dated 24th May 2010 .

HIDADA

Saudi Arabia-JEDDAH

Yes

PETIT JEAN

FRANCE

Yes

SUMMIT MANUFACTURING

United States-PA

Yes

TECHNOPALI

ITALY

Yes

VALMONT

United States

Yes
Total =

23 . 5

WOOD POLES
Page 88 of 190

METERIAL / EQUIPMENT
DESCRIPTION

SER
23. 5. 1

23. 5. 2

24

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

Applicable Standards:

WOOD POLES, ANSI CLASS HI H 3


ATLANTIC WOOD IND.

United States-GEORGIA

Yes

CAHABA PRESSURE TREATED FOREST


PRODUCT (NORTH PACIFIC GROUP)

United States-ALABAMA

Yes

COLFAX CREOSOTING CO

United States-LOUISIANA

Yes

KOPPERS INDUSTRIES

United States-PA

Yes

STALLWORTH TIMBER

United States-ALABAMA

Yes

STELLA JONES INC.

CANADA-NEW WESTMINSTER

Yes

TAYLOR LUMBER (NORTH PACIFIC GROUP)

United States-OREGON

Yes
Total =

Total =

Total =

Applicable Standards:

WOOD POLES, ANSI CLASS I - 4


ATLANTIC WOOD IND.

United States-GEORGIA

Yes

CAHABA PRESSURE TREATED FOREST


PRODUCT (NORTH PACIFIC GROUP)

United States-ALABAMA

Yes

COLFAX CREOSOTING CO

United States-LOUISIANA

Yes

KOPPERS INDUSTRIES

United States-PA

Yes

STALLWORTH TIMBER

United States-ALABAMA

Yes

STELLA JONES INC.

CANADA-NEW WESTMINSTER

Yes

TAYLOR LUMBER (NORTH PACIFIC GROUP)

United States-OREGON

Yes

GALVANIZED GUY WIRE (GROUNDING)

24 . 0

24. 0. 0

GALVANIZED GUY WIRE (GROUNDING)

Applicable Standards:

FLORIDA WIRE & CABLE

United States

Yes

JOSLYN

United States

Yes

SOUTHWIRE

United States

Yes

TREFILEUROPE

FRANCE

Yes

10-TMSS-02

Page 89 of 190

SER

25

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

RACEWAYS

25 . 1

METAL ENCLOSED BUS DUCT, 4.16 13.8 KV OR 34.5 KV

25. 1. 0

METAL ENCLOSED BUS DUCT, 4.16 13.8 KV OR 34.5 KV

Applicable Standards:

ABB ( T& D)

United States-N/A

Yes

UNIBUS

United States

Yes

WESCOSA

Saudi Arabia-DAMMAM

Yes
Total =

25 . 2

CABLE TRAY SYSTEMS

25. 2. 0

CABLE TRAY SYSTEMS

Applicable Standards:

24-TMSS-01

3M

United States-Minnesota

Yes

AB WIRE

SWEDEN-sweden

Yes

ABAHSAIN-COPE

Saudi Arabia- DHAHRAN

Yes

AL-AMAL CO.

Saudi Arabia-RIYADH

Yes

FOR LADDERS & ACCESSORIES ALSO; 10 YEARS OF EXTENDED


WARRANTY;

ALASHHOURY INDUSTRY

Saudi Arabia-Riyadh

Yes

Based on TS&SD letter # 11-0036/04-03032301 dated


06/06/2011, it's prequalified for Cable Trays & Cable Ladders as
conforming to SEC Specification # 24-TMSS-01, Rev.0 with the
following conditions:

Ten (10) years extended warranty from the date of PAC of


the first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed by Al-Ashouri Industries through letter # 2010/403/0003 dated 01/08/2010.

For any new design of Cable Trays or Cable Ladders


proposed by Al-Ashouri Industries (other than the test proven
SEC designs), Type, Special, routine and Sample test as per the
SEC standards/Specification shall be conduct on the first batch to
be supplied to SEC in presence of three (03) SEC Engineers in an
SEC approved independent test laboratory.

AL-MISBAH House for Steel Works

Saudi Arabia-Riyadh

Yes

Based on TS&SD letter 09-00509/1-03032301 dated 16th. March


2009 for Metallic Cable Tray Systems as conforming to SEC
specifications # 24-TMSS-01, rev.0; with the following
conditions:

Ten (10) years extended warranty.

Improvement needs indicated in the plant survey report

Page 90 of 190

SER

26

METERIAL / EQUIPMENT
DESCRIPTION

Saudi Arabia-JEDDAH

EFCOR

United States

Yes

ELECTROLINK Co. Ltd.

Saudi Arabia-Riyadh

Yes

HIDADA

Saudi Arabia-JEDDAH

Yes

MECSS - MID EAST CABLE SUPPORT


SOLUTIONS

Saudi Arabia- AL-KHOBAR

Yes

O-Z GEDNEY

United States

Yes

SAUDI ELECTRIC INDUSTRIES CO. LTD.

Saudi Arabia-JEDDAH

Yes

TOLARTOIS

FRANCE

Yes

WESCOSA

Saudi Arabia-DAMMAM

Yes

FACTORY LOCATION

REMARKS

based on TS&SD letter 09-00524/1-03032301 dated 16th. March


2009 for Metallic Cable Tray Systems as conforming to SEC
specifications # 24-TMSS-01, rev.0; with the following
conditions:

Eight (8) years extended warranty.

Improvement needs indicated in the plant survey report.

Total =

15

Total =

CONDUIT FITTINGS

26 . 1

DUCT SEALING UNITS

26. 1. 0

DUCT SEALING UNITS

27

ARABIAN INTERNATIONAL CO.

Pre-Qualified
Manufacturers
By SEC
Yes

MANUFACTURER

Applicable Standards:
AMIANTIT RUBBER IND. (ARIL)

Saudi Arabia-DAMMAM

Yes

UM- AL QUWAIN RUBBER INDUSTRIES

United Arab Emirates

Yes

23-TMSS-02

SWITCHES

27 . 1

DISCONNECT SWITCH, AIR BREAK, UP TO 380 KV

27. 1. 0

DISCONNECT SWITCH, AIR BREAK, UP TO 380 KV

Applicable Standards:

ABB ( T& D)

United States-N/A

Yes

ALPHA NIDAU

SWITZERLAND

Yes

30-TMSS-01

Page 91 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Alstom Grid S. p .A

FACTORY LOCATION
ITALY-Venice - Noventa di Piave

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter# 13-04035-02-30504401 dated July 22,
2013, it is pre-qualified for Disconnect Switches 420kV, 4000A
(S3CD, S3CDT & S3CD2T) only and Standalone Grounding
Switches (STB) 420kV, 63kA only as conforming to National Grid
SA specification # 30-TMSS-01, Rev.0, with the following
conditions:
All type/special and routine tests for Disconnect Switches
420kV, 4000A (S3CD, S3CDT & S3CD2T) only and Standalone
Grounding Switches (STB) 420kV, 63kA only shall be conducted
at in an Independent testing laboratory on one switch before
supplied to SEC system in the presence of three (3)
SEC/National Grid SA engineers & one (1) National Grid SA
approved independent inspection agency Inspector, all the
related costs for witnessing the tests will be borne by the
manufacturer. This was confirmed by Alstom Grid S. p .A, ITALY
through their letter # 323/11/C/RP.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by Alstom Grid S. p .A, ITALY through their
letter # 136/11/CO/RP.

AREVA

FRANCE

Yes

EFACEC

PORTUGAL

Yes

HAPAM

NETHERLANDS

Yes

SUSPENDED based on TS&SD letter 10-00402-03032301 dated


February 08, 2010

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

MG/EGIC

FRANCE

Yes

S&C

United States

Yes

SDCEM

FRANCE

Yes

SIEMENS

GERMANY

Yes

SOUTHERN STATES

United States

Yes

SOUTHERN STATES/ USA HAS ACQUIRED SIEMENS SWITCH


FACTORY
Total =

27 . 2

LV AUTO-TRANSFER SWITCH

27. 2. 0

LV AUTO-TRANSFER SWITCH

12

Applicable Standards:

Page 92 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
ALSTOM

FRANCE

Pre-Qualified
Manufacturers
By SEC
Yes

ASCO

United Arab Emirates

Yes

WESTINGHOUSE

United States

Yes

MANUFACTURER

27 . 3

PAD MOUNTED SF6/OIL SWITCH, 34.5 KV

27. 3. 0

PAD MOUNTED SF6/OIL SWITCH, 34.5 KV


FRITZ DRIESHER KG

28

FACTORY LOCATION

REMARKS

Total =

Total =

Applicable Standards:
GERMANY

Yes

LV PANELS & ENCLOSURES

28 . 1

RELAY & CONTROL PANEL

28. 1. 0

RELAY & CONTROL PANEL

Applicable Standards:

31-TMSS-01

ABB

SWEDEN

Yes

ABB/AEIL

Saudi Arabia

Yes

ACRASTYLE

United Kingdom

Yes

AEL -SIEMENS

Saudi Arabia-JEDDAH

Yes

ALFANAR ELECTRICAL SYSTEMS

Saudi Arabia-RIYADH

Yes

AREVA

United Kingdom

Yes

CRUINKSHANK & PARTNERS LTD.

United Kingdom

Yes

EPS LTD. (GROUPE SCHNEIDER)

Saudi Arabia-RIYADH

Yes

ETA-PCS

United Arab Emirates-DUBAI

Yes

It is pre-qualified for Relay & Control Panels as conforming to


SEC specification # 31-TMSS-01, Rev.0 with the following
condition:

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order.

JAL INTERNATIONAL

Saudi Arabia-KHOBAR

Yes

Up to 132kV only.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of delivery
in case of first direct material supply order.

Based on TS&SD letter# 09-01251-03032301 dated 03rd. May


2009 UP TO 380KV as confirming to SEC specification #
31-TMSS-01, rev.0 with Ten (10) years warranty from the date
of PAC of the Turnkey project in case of contract award or date
of delivery in case of direct material supply order.

Page 93 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
LS

KOREA, Republic of

Pre-Qualified
Manufacturers
By SEC
Yes

MEMF-ETA Switchgear Manufacturing Company

Saudi Arabia-Riyadh

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS
PREVIOUSLY LG
Based on S&SD Letter 13-03789-03-30504401 dated January
28, 2013. It is prequalified for Relay & Control Panel up to
132kV as conforming to National Grid SA specification #
31-TMSS-01, Rev.0, with the following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or the date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
META/12/AM dated March 23, 2011.

MOHD. AL-OJAIMI LTD.

Saudi Arabia-Riyadh

Yes

Extended warranty for 10 years.

PROTEA/AREVA T&D

FRANCE--

Yes

10 YEAR EXTENDED WARRANTY

REYROLLE LTD.

United Kingdom

Yes

SCHNEIDER H.V FACTORY

FRANCE-GRENOBLE

Yes

SIEMENS

GERMANY

Yes

System House Factory for Electric Panels (SEP)

Saudi Arabia-Riyadh

Yes

TIEPCO

Saudi Arabia-DAMMAM

Yes

VA TECH

Saudi Arabia-RIYADH

Yes

Based on TS&SD letter# 09-01500-03032301 dated May 25,


2009, 10-01055/02-03032301 dated May 03, 2010 & S&SD
Letter 12-03596-02-30504401 dated April 29, 2012. It is
prequalified for Relay & Control Panel up to 380kV as conforming
to SEC specification # 31-TMSS-01, Rev.0 with the following
condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or the date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated December 11, 2011.
ASSEMBLING UP TO 132KV ONLY, ENCLOSURES SHALL BE
PROCURED FROM MESCO (RIYADH)

Page 94 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
WESCOSA

FACTORY LOCATION
Saudi Arabia-DAMMAM

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 11-F02715-03032301 dated
17/09/2011, it is prequalified for Relay & Control Panels, 230kV
and above as confirming to SEC specification # 31-TMSS-01,
Rev.0 with the following conditions:
All type, special, routine and sample tests as per SEC
specifications/standards shall be carried out on the first batch of
Relay & Control Panels to be supplied to SEC, in case of securing
an order, in the presence of three (3) SEC Engineers & one (1)
approved Independent Inspection Agency Inspector in an
Independent Testing Laboratory. All the related costs for
witnessing the tests will be borne by the manufacturer. This was
confirmed by WESCOSA-Dammam through letter # Nil dated
16/06/2010.
Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed by
WESCOSA-Dammam through letter # Nil dated 05/10/2010.

28 . 2

ANNUNCIATOR SYSTEM

28. 2. 0

ANNUNCIATOR SYSTEM

29

Applicable Standards:
ABB SUBSTATION AUTOMATION OY

FINLAND

Yes

AMETEK POWER INSTRUMENTS

United States

Yes

FUJIKURA VISCAS CORP

JAPAN

Yes

J-POWER SYSTEM CORP.

JAPAN

Yes

LS

KOREA, Republic of

Yes

NEXANS

SWITZERLAND

Yes

PAN ALARM

United States

Yes

PIRELLI

GERMANY-BERLIN

Yes

RONAN ENGINEERING

United Kingdom

Yes

RTK ENGINEERING LTD.

United Kingdom

Yes

SIEMENS

GERMANY

Yes

STEINER

JAPAN

Yes

Total =

21

Total =

12

38-TMSS-05
SACO 16D3

PREVIOUSLY LG

ARRESTER, SURGE OR LIGHTNING

Page 95 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

29 . 1

SURGE ARRESTERS, STATION CLASS UP TO 380 KV

29. 1. 0

SURGE ARRESTERS, STATION CLASS UP TO 380 KV

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

Applicable Standards:

REMARKS

35-TMSS-01

ABB

SWEDEN

Yes

ABB HV TECHNOLOGIES

SWITZERLAND

Yes

AREVA

FRANCE

Yes

BOWTHORPE

United Kingdom

Yes

COOPER (MCGRAW-ED)

United States

Yes

ELPRO INTL. LTD

INDIA

Yes

Upto 132 kV Only - Complete Type, Routine / Acceptance tests


for first order & 10 Years Warranty from the date of PAC is
required.

FUJI Electric Co.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

JAPAN AE POWER SYSTEMS CORP.

JAPAN

Yes

MITSUBISHI

JAPAN--

Yes

OHIO BRASS

United States

Yes

SIEMENS

GERMANY

Yes

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

TRIDELTA

GERMANY

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total =

30

14

CIRCUIT BREAKER

30 . 1

DEADTANK SF6 BREAKER

30. 1. 1

DEADTANK SF6 BREAKERS, 69 KV

Applicable Standards:
ABB ( T& D)

United States-N/A

Yes

AREVA

United States-CHARLEROI

Yes

37-TMSS-01

SUSPENDED for all SEC/National Grid SA ongoing and


forthcoming projects based on VP, Engineering letter #
13-01705-30504401 dated March 23, 2013.

Page 96 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

FUJI Electric Co.

JAPAN--

Pre-Qualified
Manufacturers
By SEC
Yes

GE-HITACHI HVB

United States-GEORGIA

Yes

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

SIEMENS

GERMANY-Berlin

Yes

Based on S&SD Letter 12-2202-01-30504401 dated July 24,


2012, it is pre-qualified for Dead Tank Circuit Breaker type 3AP1
DT 72.5KV & 145KV as conforming to National Grid SA
Specification # 37-TMSS-01, Rev.0 with the following
conditions:

MANUFACTURER

FACTORY LOCATION

REMARKS
Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

CB type 3AP1 DT 72.5KV & 145KV is not capable for Reactor


and Capacitor bank back to back switching as confirmed by
Siemens through their letter# E T HP CB B SL/MTH dated April
27, 2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed by
Siemens through their letter# E T HP CB B SL/MTH, dated
December 18, 2012.
TOSHIBA CORPORATION, T&D

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.


Total =

30. 1. 2

DEADTANK SF6 BREAKERS,110 - 132 KV

Applicable Standards:

ABB

SWITZERLAND

Yes

ABB ( T& D)

United States-N/A

Yes

37-TMSS-01

Page 97 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
AREVA T&D Inc.-USA

FACTORY LOCATION
United States-Charleroi

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
SUSPENDED for all SEC/National Grid SA ongoing and
forthcoming projects based on VP, Engineering letter #
13-01705-30504401 dated March 23, 2013.
The old remark before suspension was:
Based on TS&SD letter # 10-02708-02-03032301 dated
25/10/2010, it is pre-qualified for 145kV Dead Tank Circuit
Breaker type DT1-145FK, 40KA, 2000A as confirming to SEC
specification # 37-TMSS-01, Rev.0, with the following condition:
Ten (10) years extended warranty for the proposed 145kV
Dead Tank Circuit Breaker type DT1-145FK from the date of PAC
of the turnkey project in case of contract award or date of
delivery in case of direct material supply order. This was
confirmed in writing by AREVA T&D, Inc-USA through letter #Nil
dated 6th March 2009.

FUJI Electric Co.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

GE-HITACHI HVB

United States-GEORGIA

Yes

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

SIEMENS

GERMANY-Berlin

Yes

Based on S&SD Letter 12-2202-01-30504401 dated July 24,


2012, it is pre-qualified for Dead Tank Circuit Breaker type 3AP1
DT 72.5KV & 145KV as conforming to National Grid SA
Specification # 37-TMSS-01, Rev.0 with the following
conditions:
CB type 3AP1 DT 72.5KV & 145KV is not capable for Reactor
and Capacitor bank back to back switching as confirmed by
Siemens through their letter# E T HP CB B SL/MTH dated April
27, 2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed by
Siemens through their letter# E T HP CB B SL/MTH dated
December 18, 2012.

SIEMENS

United States

Yes

CB type 3AP1 DT 72.5KV & 145KV is not capable for Reactor


and Capacitor bank back to back switching as confirmed by
Siemens through their letter# E T HP CB B SL/MTH dated April
27, 2012.

Page 98 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
TOSHIBA CORPORATION, T&D

FACTORY LOCATION
JAPAN--

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
Total =

30. 1. 3

Applicable Standards:

DEADTANK SF6 BREAKERS, 230 KV


ABB ( T& D)

United States-N/A

Yes

AREVA

United States-CHARLEROI

Yes

10

37-TMSS-01

SUSPENDED for all SEC/National Grid SA ongoing and


forthcoming projects based on VP, Engineering letter #
13-01705-30504401 dated March 23, 2013.
The old remark before suspension was:
Type DT1-245 F3; 10 years of extended warranty; di-electric
test, riv test, continuous current temperature rise test @ 2500 A,
60Hz is to be carried out in the first batch in the presence of 3
SEC engineers and 1 IIA inspector.

30 . 2

SF6, LIVE TANK

30. 2. 1

LIVE TANK, 69 KV SF6 BREAKER

FUJI Electric Co.

JAPAN--

Yes

GE-HITACHI HVB

United States-GEORGIA

Yes

HITACHI Ltd.

JAPAN--

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

MITSUBISHI

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

TOSHIBA CORPORATION, T&D

JAPAN--

Yes

ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Applicable Standards:
ABB

SWEDEN

Yes

ABB

SWITZERLAND

Yes

ABB SWITCHGEAR AB

SWEDEN-LUDUVIKA

Yes

AREVA

SWITZERLAND-OBERENTFELDEN Yes

AREVA_FRANCE,VILLEUR BANNE

FRANCE-,VILLEUR BANNE

Yes

SIEMENS

GERMANY

Yes

Originally JAPAN AE POWER SYSTEM CORP and subsequent


change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

Total =

Total =

37-TMSS-02

Page 99 of 190

SER
30. 2. 2

30. 2. 3

30. 2. 4

31

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

Applicable Standards:

LIVE TANK, 110 - 132 KV SF6 BREAKER


ABB

SWEDEN

Yes

AREVA

GERMANY

Yes

AREVA_FRANCE,VILLEUR BANNE

FRANCE-,VILLEUR BANNE

Yes

SIEMENS

GERMANY

Yes

Applicable Standards:

LIVE TANK, 230 KV SF6 BREAKER


ABB

SWEDEN

Yes

AREVA_FRANCE,VILLEUR BANNE

FRANCE-,VILLEUR BANNE

Yes

SIEMENS

GERMANY

Yes

REMARKS

37-TMSS-02

Total =

Total =

Total =

Total =

37-TMSS-02

Applicable Standards:

CIRCUIT SWITCHER, 69 230 KV


S&C

CANADA

Yes

S&C

United States

Yes

SIEMENS

GERMANY

Yes

SUPERVISING EQUIPMENT, TELEMETERING EQUIPMENT

31 . 1

LINE TRAP

31. 1. 0

LINE TRAP

31 . 2

LINE TUNER

31. 2. 0

LINE TUNER

Applicable Standards:
HAEFELY-TRENCH ELECTRIC

SWITZERLAND

Yes

HAEFELY-TRENCH ELECTRIC

CANADA

Yes

Applicable Standards:
ABB HV TECHNOLOGIES

SWITZERLAND

38-TMSS-01

38-TMSS-02

Yes

Page 100 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Total =

31 . 3

CCVT AND/OR COUPLING CAPACITOR CARRIER

31. 3. 1

CCPD/CCVT, 69KV UP TO 380 KV

Applicable Standards:
ABB

SWEDEN

Yes

ABB HV TECHNOLOGIES

SWITZERLAND

Yes

Electrotecnica Arteche

SPAIN-Mungia

Yes

38-TMSS-08,50-TMSS-02

Based on S&SD Letter 12-03192-02-30504001 dated February


19, 2012, it is pre-qualified for CVT Capacitor Voltage
Transformer up to 132 kV only as confirming to SEC
Specification # 50-TMSS-02 Rev.0 with the following conditions:
All Type, Routine and Special testes shall be carried out on the
first batch of CVT Capacitor Voltage Transformer up to 132 kV
only in an Independent Testing Laboratory in the presence of
three (3) SEC Engineers & one (1) SEC approved Independent
Inspection Agency (IIA) Inspector. All costs of which shall be
borne by the manufacturer. This was confirmed by the
manufacturer through their letter # Nil dated April 28, 2011G
and October 07, 2011G.
The complete tests in one (1) sample of Nynas Nytro 10 XN
Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.

GE

United States

Yes

HAEFELY-TRENCH ELECTRIC

FRANCE

Yes

HAEFELY-TRENCH ELECTRIC

CANADA

Yes

HAEFELY-TRENCH ELECTRIC

SWITZERLAND

Yes

KONCAR INSTRUMENT TRANSFORMERS INC.

Croatia/Hrvatska--

Yes

Limited up to 132kV only. All Type, Special, Routine tests per


SEC Standards and IEC to be performed at KONCAR-Electrical
Institute Inc. as independent and accredited testing laboratory.
Extended guarantee/warrenty for 10 years.
Page 101 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
NISSIN

JAPAN

Pre-Qualified
Manufacturers
By SEC
Yes

PASSONI & VILLA

ITALY

Yes

PFIFFNER

SWITZERLAND

Yes

Based on TS&SD letter# 09-01105-03032301 dated 24th June


2009, it is pre-qualified for CT & CVT rated up to 380kV as
confirming to SEC specification # 50-TMSS-01, rev.0 & #
50-TMSS-02, rev.0 respectively with the following conditions:

All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in an independent testing laboratory in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

RITZ

United States

Yes

TYPE TEST REQUIRED IN FIRST SUPPLY

TRENCH ITALIA

ITALY-N/A

Yes

PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO)

MANUFACTURER

FACTORY LOCATION

REMARKS

Total =

31 . 4

REMOTE TERMINAL UNIT (RTU)

31. 4. 0

REMOTE TERMINAL UNIT (RTU)

Applicable Standards:
ABB

GERMANY

Yes

AREVA

FRANCE

Yes

EFACEC Sistemas de Elctronica, S.A

PORTUGAL-Maia

Yes

13

38-TMSS-03
RTU-560, SPIDER 200,232 & 233

Based on TS&SD letter# 09-01819-03032301 dated 23rd June


2009, it is prequalified for for RTU type CLP500 as confirming to
SEC specification # 38-TMSS-03, rev.0 with the following
condition:
Ten (10) years warranty from the date of PAC of the first
turnkey project in case of contract award or date of first delivery
in case of direct material supply order.

FOXBORO

AUSTRALIA

Yes

GE HARRIS

CANADA

Yes

HARRIS D20

Global Energy Technologies Ltd.

United Arab Emirates-Dubai

Yes

Ten (10) years extended warranty.


Microsol XCell SCADA RTU System

HARRIS CORPORATION

United States-MELBOURNE,

Yes

HARRIS MICROPLEX 5000

JAL INTERNATIONAL

Saudi Arabia-KHOBAR

Yes

ASSEMBLING ONLY

LSIS

KOREA, Republic of--

Yes

SEVEN (7) YEARS EXTENDED WARRANTY.

MICROSOL LTD.

Ireland-DUBLIN

Yes

MICROSOL

Page 102 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
SAT

AUSTRIA

Pre-Qualified
Manufacturers
By SEC
Yes

SIEMENS

GERMANY

Yes

SIEMENS (LANDYS) - TELEGYR

United States-SAN JOSE, CA

Yes

VA TECH

AUSTRIA

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

TELEGYR 5700

Total =

31 . 5

SEQUENCE OF EVENTS RECORDER

31. 5. 0

SEQUENCE OF EVENTS RECORDER

Applicable Standards:

38-TMSS-04

ABB

GERMANY

Yes

RTU 560

GE HARRIS

CANADA

Yes

HARRIS D20

Global Energy Technologies Ltd.

United Arab Emirates-Dubai

Yes

Ten (10) years extended warranty.


Microsol XCell SOE RTU System

JAL INTERNATIONAL

Saudi Arabia-KHOBAR

Yes

SOE RECORDING SYSTEM AND INTERFACE & CONTROL


CABINET/MARSHALING PANELS

LSIS

KOREA, Republic of--

Yes

SEVEN (7) YEARS EXTENDED WARRANTY.

MICROSOL LTD.

Ireland-DUBLIN

Yes

MICROSOL

RONAN ENGINEERING

United States-LOS ANGELES, CA

Yes

X500E/1000
Total =

31 . 6

TRANSDUCERS

31. 6. 1

FREQUENCY TRANSDUCERS

31. 6. 2

14

Applicable Standards:
ALSTOM

United States

Yes

ISKRA MIS

SLOVENIA-KRANJ

Yes

ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT


EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.
Total =

Total =

Applicable Standards:

TAP POSITION TRANSDUCERS


AREVA

United Kingdom

Yes

Page 103 of 190

SER
31. 6. 3

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

Applicable Standards:

TRANSDUCERS
CEWE INSTRUMENTS AB

SWEDEN

Yes

ENERDIS

FRANCE

Yes

LSIS

KOREA, Republic of--

Yes

TILLQUIST

SWEDEN

Yes

TYCO ELECTRONICS (UK) Ltd - CROMPTON


INSTRUMENTS

United Kingdom--

Yes

SEVEN (7) YEARS EXTENDED WARRANTY.

Based on TS&SD Letters (08-F00975/01-03032301 dated June


04, 2008), (10-F00230/01-03032301 dated February 03, 2010)
& (11-F03017/01-03032301 dated October 16, 2011). Integra
1560 is prequalified for Transducers as confirming to SEC
Specification # 40-TMSS-02, Rev.0 with the following condition:
Five (05) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order. This was
confirmed by TYCO Electronic UK through their letter #
INT-SEC-06 dated January 03, 2008 and its Amendment dated
November 21, 2011.
Total =

31. 6. 4

Applicable Standards:

WATTHOURS/VARHOURS TRANSDUCERS
ISKRA MIS

SLOVENIA-KRANJ

Yes

MITSUBISHI ELECTRIC

JAPAN

Yes

SCIENTIFIC COLUMBUS

United States

Yes

ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT


EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.

Total =
31. 6. 5

Applicable Standards:

VOLTAGE TRANSDUCERS
ABB (ASEA INC.)

CANADA-MONTREAL

Yes

AREVA

United Kingdom

Yes

ISKRA MIS

SLOVENIA-KRANJ

Yes

TRANSDATA

United States

Yes

ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT


EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.

Total =

Page 104 of 190

SER
31. 6. 6

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

Applicable Standards:

WATTS/VARS TRANSDUCERS
ABB (ASEA INC.)

CANADA-MONTREAL

Yes

AREVA

United Kingdom

Yes

ISKRA MIS

SLOVENIA-KRANJ

Yes

TRANSDATA

United States

Yes

ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT


EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.

Total =

31 . 7

PROTECTIVE RELAYS

31. 7. 1

TRANSMISSION LINE PROTECTIVE RELAYS 380/132/115/110kV

Applicable Standards:

Page 105 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB

FACTORY LOCATION
SWEDEN---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
RED 670
Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6X0-D1
A-BA-XE
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
4CT+4VT+12BIs+12BOs
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
RED 670
Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6X0-D1
A-CA-XE
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Page 106 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Hardware:
4CT+4VT+12BIs+12BOs
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
RED 670
Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6B6-D1
A-BA-XE
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
RED 670
Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6B6-D1
A-CA-XE
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N

Page 107 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS

Page 108 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Alstom

FACTORY LOCATION
United Kingdom---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
MiCOM P546
Ordering Code:
P54631NH7M0710M
Built In Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
4CT+4VT+12BIs+12BOs
8CT+4VT+16BIs+16BOs
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
MiCOM P546
Ordering Code:
P54631NK7M0710M
Built In Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Page 109 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Hardware:
4CT+4VT+12BIs+12BOs
8CT+4VT+16BIs+16BOs
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS

Page 110 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
GE

FACTORY LOCATION
CANADA---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
L90
Ordering code:
L90-K03-HKH-F8L-H6L-L6U-W7K(*)
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
4CT+4VT+12BIS+12BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
L90
Ordering code:
L90-K03-HKH-F8L-H6L-L6U-W73(*)
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:

Page 111 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
4CT+4VT+12BIS+12BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
L90
Ordering code:
L90-K05-HKH-F8L-H6L-L8N-N6D-S67-U67-W7K(*)
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
L90
Ordering code:
L90-K05-HKH-F8L-H6L-L8N-N6D-S67-U67-W73(*) (*) CH2 to be
attenuated to fit SDH
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision

Page 112 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS

Page 113 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SEL

FACTORY LOCATION
United States---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
SEL 411L
Ordering code:
0411L1X6X1C7CDXH5C424XX
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
27/59/59N
50BF
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
SEL 411L
Ordering code:
0411L1X6X1C7CEXH5C424XX
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
27/59/59N
50BF
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS

Page 114 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Siemens

FACTORY LOCATION
GERMANY---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
7SD522
Ordering code:
7SD5221-5CB99-9HK0+L0S+M0H+N7A
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:
4CT+4VT+12BIS+12BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS
Relay Type:
7SD522
Ordering code:
7SD5221-5CB99-9HK0+L0S+M0J+N7A
Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator
Hardware:

Page 115 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
4CT+4VT+12BIS+12BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS
Total =

31. 7. 2

POWER TRANSFORMER PROTECTION RELAYS 380/132/115/110kV

Applicable Standards:

Page 116 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB

FACTORY LOCATION
SWEDEN---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
RED 670
Ordering code:
RET670*1.2-B30X00-A02D03E01P01-B1X-C-B-KB-B-B3B3-D1A-X
E
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
2-WINDING:
14xCT(Ph)+4xCT(Gnd)
3-WINDING:
16xcontact inputs
8xcontact outputs
IEC 61850 2-ports
Relay Type:
RET 670
Ordering code:
RET670*1.2-B40X00-A01A02D04E01P01-B1X-C-B-KB-B-B3B3-D1
A-XE
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O

Page 117 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
3-WINDING:
14xCT(Ph)+4xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports

Page 118 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Alstom Grid

FACTORY LOCATION
United Kingdom-Stafford

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
MiCOM P 643
Ordering code:
P64332NA6M0040K
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instantaneous Diff
50/51PH&GR all windings
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC Supply Supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
2-WINDING:
9xCT (Ph) + 4xCT (Gnd)
3-WINDING:
16xcontact inputs
8xcontact outputs
IEC 61850 2-ports
Relay Type:
MiCOM P 643
Ordering code:
P64532NA6M0040K
Built in Functions:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instantaneous Diff
50/51PH&GR all windings
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24

Page 119 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
74 DC Supply Supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
3-WINDING:
15xCT(Ph)+3xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports

Page 120 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
GE Multilin

FACTORY LOCATION
CANADA-Markham

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
T 60
Ordering code:
T60-K22-HKH-F8F-H6L-M8N-PXX-U8N-WXX
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
2-WINDING:
15xCT(Ph)+5xCT(Gnd)
8xcontact inputs
4xcontact outputs
3-WINDING:
IEC 61850 2-ports
Relay Type:
T 60
Ordering code:
T60-K22-HKH-F8F-H6L-M8N-P6T-U8N-WXX
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24

Page 121 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE
Hardware:
3-WINDING:
15xCT(Ph)+5xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports

SEL

United States

Yes

Relay Type:
SEL487E
Ordering code:
0487E3X648XXC2X4H624XXX
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
60
DFR/SOE
Hardware:
2-WINDING:
8xcontact inputs
4xcontact outputs
3-WINDING:
15xCT(Ph)+3xCT(Gnd)
IEC 61850 2 ports

Page 122 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Siemens

FACTORY LOCATION
GERMANY---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
7UT6
Ordering code:
7UT6331-5EB92-1BC1+L0S
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
CT Super (All windings)
60
DFR/SOE
Hardware:
2-WINDING:
9xCT(Ph)+4xCT(Gnd)
3-WINDING:
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports
Relay Type:
7UT6
Ordering code:
7UT6351-5EB92-1BC1+L0S
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24

Page 123 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
74 DC supply supervision.
CT Super (All windings)
60
DFR/SOE
Hardware:
3-WINDING:
12xCT(Ph)+4xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports

Page 124 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ZIV

FACTORY LOCATION
SPAIN-Madrid

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
IDV
Ordering code:
8IDVK4F22Z104SKL
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67N/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout Coil Supervision.
CT Super (All windings)
60
DFR/SOE
Hardware:
2-WINDING:
9xCT(Ph)+2xCT(Gnd)
8xcontact inputs
4xcontact outputs
3-WINDING
IEC 61850 2 ports
Relay Type:
IDV
Ordering code:
8IDVD4F22Z904VKL
Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67N/67N(All windings)
50 BF
49T
74 DC supply supervision.
74 Lockout Coil Supervision.
CT Super (All windings)
DFR/SOE

Page 125 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Hardware:
3-WINDING:
12xCT(Ph)+2xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports
Total =

31. 7. 3

Double BUS-BAR Single CB 132/115/110 kV Relays

Applicable Standards:

Page 126 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB

FACTORY LOCATION
SWEDEN

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
REB500 CU
Ordering code:
REB500-CU03-V76-S30-P0-B0-CA3-CB3
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
CT Supervision
Intertrip facility
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
CU: 8BIs+8BOs
24 PU connected to CU
IEC 61850, 2-PORTS
Relay Type:
REB500 CU
Ordering code:
REB500-CU03-V76-S50-P0-B0-CA3-CB3
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
CT Supervision
Intertrip facility
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
CU: 8BIs+8BOs
48 PU connected to CU
IEC 61850, 2-PORTS
Relay Type:
REB500 PU
Ordering code:
REB500-BU03-C2-A40-P0-F1-BB2-IO0-R0-OC0-BFP1-EFP1-PD0DR0-L0-T0+1MRB150073R0052
Built in Function:
50BF: stage1
50BF: stage2

Page 127 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
End fault protection with Interntrip or Dead Zone
HMI
DFR/SOE
Hardware:
PU: 4CT+16BIS+12BOS

Alstom

United Kingdom---

Yes

Relay Type:
MICOM P740 PU
Ordering code:
P74137NA6M0510K
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage2
CT Supervision
Intertrip facility
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
CU: 8BIS+8BOS
24 PU connected to CU
IEC 61850, 2-PORTS
Relay Type:
MICOM P740
Ordering code:
P74331NA6M0510K
Built in Function:
50BF: stage1
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
HMI
DFR/SOE
Hardware:
PU: 4CT+16BIs+12BOS
IEC 61850, 2-PORTS

Page 128 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SIEMENS

FACTORY LOCATION
GERMANY-Berlin

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
7SS52x CU
Ordering code:
7SS5220-4AB92-1CA0+L0R
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage1
50BF: stage2
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
CU: 8BIs+8BOs
24 PU connected to CU
IEC 61850, 2-PORTS
Relay Type:
7SS52x CU
Ordering code:
7SS5220-4AB92-1FA0+L0R
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage1
50BF: stage2
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
CU: 8BIs+8BOs
48 PU connected to CU
IEC 61850, 2-PORTS

Page 129 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Relay Type:
7SS52x PU
Ordering code:
7SS5231-5CA01-1AA1
*BO=6 with double contact
Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage1
50BF: stage2
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
Selective Zone tripping and blocking
HMI
DFR/SOE
Hardware:
PU: 4CT+16BIs+12BOS
Total =

31. 7. 4

33kV Plain OH Feeder + UG + Incomer Relays

Applicable Standards:

Page 130 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB

FACTORY LOCATION
SWEDEN

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
REL 670
Ordering code:
REL670*1.2-A31X00-H07P01-B1X-AX-KB-B-B6X0-D1A-XX-XE
Built in Function:
Control & MIMIC
21 P&GD
50N/51 P&G
67P/67N
49 Thermal Overload
Phase unbalance 46
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
16 BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 131 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SEL

FACTORY LOCATION
United States---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
SEL421
Ordering code:
04214611XC2X43224XXXX
Built in Function:
Control & MIMIC
21 P&GD
50N/51 P&G
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
15BI+23 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 132 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SIEMENS

FACTORY LOCATION
GERMANY-Berlin

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
7SA6x
Ordering code:
7SA6311-5BB92-2DM4+L0S
*with 20BI+09BO
**ONLY 67N
Built in Function:
Control & MIMIC
21 P&GD
50N/51 P&G
67N
49 Thermal Overload
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
16 BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
Total =

31. 7. 5

13.8kV Plain OH Feeder + UG + Incomer Relays

Applicable Standards:

Page 133 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB

FACTORY LOCATION
FINLAND

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
REF615
Ordering code:
HBFJAEAGNEA1BAA1XE
Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
16BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 134 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
GE Multilin

FACTORY LOCATION
SPAIN--

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
F650
Ordering code:
F650-NFD-F2G1-HI-6E
Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
16BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 135 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
NR Electric Co. Ltd

FACTORY LOCATION
CHINA-Nanjing

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter# 13-07186-1-30504401 dated December
23, 2013, it is pre-qualified for 13.8 kV Plain OH Feeder + UG +
Incomer Relays, with the following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award and subsequently
reduced yearly in case of future project award . This was
confirmed in writing by the manufacturer through their letter #
NR-SEC-20110829-CL2 dated August 29, 2011.
Relay Type:
PCS 9611
Ordering code:
PCS-9611-A1C-1B1B3A3A2A
Built in Function:
Control & Mimic
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase unbalance 46
Under Current 37
27/59
Auto reclosure 79
50BF
Trip Circuit Supervision 74TC
Inrush Blocking
Under / over frequency 81
CT Supervision
60 (VT Fuse Supervision )
Sensitive earth element function
Second harmonic detection
DFR / SOE
Hardware:
16 BI+ 07 BO
3CT(Ph) + 1CT(GD)+3VT
IEC 61850, 2-Optical Ports PRP

Page 136 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SCHNEIDER ELECTRIC (Telemecanique)

FACTORY LOCATION
FRANCE--

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
Sepam-80
Ordering code:
SEP888S84J33TNTLA
Along with Ordering Code, following optional modules needs to
be ordered..
1. MES120 (59715) #2 nos.
2. ACE850F0 interface module (59659) # 2 no.
3. ACE850 communication cable (CCA614) # 2 no.
Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
14BI+6 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 137 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SEL

FACTORY LOCATION
United States

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
SEL-451
Ordering code:
04515611XC2X4H244XXXX
Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
16BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 138 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Siemens

FACTORY LOCATION
GERMANY---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
7SJ64
Ordering code:
7SJ6411-5EB92-1FG1+L0S
Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE
Hardware:
15BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
Total =

31. 7. 6

13.8kV and 33kV Capacitor Bank Relays

Applicable Standards:

Page 139 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB

FACTORY LOCATION
SWEDEN

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
REC670
Ordering code:
1MRK 002 814-AC
Built in Function:
27P
50/51 P&G
Undercurrent
50_2
59B&59N
59_2
Harmonic Overload
60P&N
87V phase&neutral
67 P&G
67_2
60 VT Supervision
DFR/SOE
Hardware:
6CT+6VT+16BIs+24BOs
IEC 61850,2-PORTS

GE Multilin

CANADA-Markham

Yes

Relay Type:
C70
Ordering code:
C70-K03-HKH-F8N-H6D-M8V-P67-U6D-W67
Built in Function:
27P
50/51 P&G
Undercurrent
50_2
59B&59N
59_2
Harmonic Overload
60P&N
87V phase&neutral
67 P&G
67_2
60 VT Supervision
DFR/SOE
Hardware:
6CT+6VT+16BIs+20BOs
IEC 61850,2-PORTS

Page 140 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SEL

FACTORY LOCATION
United States

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
SEL487V
Ordering code:
0487V0X6111XC2X4H424XXX
Built in Function:
27P
50/51 P&G
Undercurrent
50_2
59B&59N
59_2
Harmonic Overload
60P&N
87V phase&neutral
67 P&G
67_2
60 VT Supervision
DFR/SOE
Hardware:
6CT+6VT+15BIs+23BOs
IEC 61850,2-PORTS
Total =

31. 7. 7

Tripping and Lockout Relay

Applicable Standards:

Page 141 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Alstom

FACTORY LOCATION
United Kingdom---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
MVAJ
Ordering code:
MVAJ101RA0802A
Standard Specification :
Self Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)
Note-Withdrawable from Case
Relay Type:
MVAJ
Ordering code:
MVAJ105RA0802A
Standard Specification :
Hand & Electrical Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)
Note-Withdrawable from Case

Page 142 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ELECTRO-SWITCH

FACTORY LOCATION
United States

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
LOR
Ordering code:
LOR/HR-7810F
Standard Specification :
Hand & Electrical Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)
Relay Type:
LOR
Ordering code:
LOR/SR-7868FD
Standard Specification :
Self Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)

Page 143 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Siemens

FACTORY LOCATION
GERMANY---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
TR
Ordering code:
TR241-7PG1524-1JC60-1AF0
Standard Specification :
Hand & Electrical Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)
Note-Withdrawable from Case

Relay Type:
TR
Ordering code:
TR212-7PG1521-2JC60-1AF0
Standard Specification :
Self Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)
Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)
Note-Withdrawable from Case
Total =

Page 144 of 190

SER
31. 7. 8

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

Applicable Standards:

Short Cable - all voltage levels


ABB

SWEDEN

Yes

Relay Type:
RED670
Ordering code:
RED670*1.2-B32X00-C24P02-B1X-C-B-KB-B-B6X0-D1AX-AAXXXX
-XE
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (6CT+6VT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 850nm, CH-2 850nm (up to 3km)
IEC 61850 -2 Ports
Relay Type:
RED670
Ordering code:
RED670*1.2-B32X00-C24P02-B1X-C-B-KB-B-B6X0-D1AX-BBXXXX
-XE
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (6CT+6VT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1310nm, CH-2 1310nm (up to 80km)
IEC 61850 -2 Ports

Page 145 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Alstom Grid

FACTORY LOCATION
United Kingdom-Stafford

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
MiCOM P543
Ordering code:
P54331NA7M0610M
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (5CT+4VT)
Binary Inputs 16 Inputs
Binary Outputs 14
CH-1 820nm, CH-2 820nm (up to 1km)
IEC 61850 -2 Ports
Relay Type:
MiCOM P543
Ordering code:
P54331NC7M0610M
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (5CT+4VT)
Binary Inputs 16 Inputs
Binary Outputs 14
CH-1 1300nm, CH-2 1300nm (up to 50km)
IEC 61850 -2 Ports

Page 146 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
GE

FACTORY LOCATION
CANADA---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
L90
Ordering code:
L90-K03-HKH-F8L-H6G-L6T-N67-S67-W77
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 820nm, CH-2 820nm (up to 1km)
IEC 61850 -2 Ports
Relay Type:
L90
Ordering code:
L90-K03-HKH-F8L-H6G-L6T-N67-S67-W2B
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1300nm, CH-2 1300nm (up to 24km)
IEC 61850 -2 Ports

Page 147 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SEL

FACTORY LOCATION
United States

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
SEL411L
Ordering code:
0411L1X6X1C7CCXH5C424XX (2KM)
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (6CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 820nm, CH-2 820nm (up to 1km)
IEC 61850 -2 Ports
Relay Type:
SEL411L
Ordering code:
0411L1X6X1C7DDXH5C424XX (24KM)
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (6CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1300nm, CH-2 1300nm (up to 24km)
IEC 61850 -2 Ports

Page 148 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Siemens

FACTORY LOCATION
GERMANY---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
7SD52
Ordering code:
7SD5221-5CB99-9CJ0+L0S+M0A+N0A
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 820nm, CH-2 820nm (up to 1.5km)
IEC 61850 -2 Ports
Relay Type:
7SD52
Ordering code:
7SD5221-5CB99-9CJ0+L0S+M0G+N0G
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision
Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1300nm, CH-2 1300nm (up to 24km)
IEC 61850 -2 Ports
Total =

31. 7. 9

High Impedance BBP for all levels

Applicable Standards:

Page 149 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB

FACTORY LOCATION
SWEDEN---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
REC670
Ordering code:
REC670*1.2-A30X00-A02C31P02-B1-AA-KB-B-B6X0-D1A-XXX-XE
Built in Function:
87 3-Phase High Z Differential
(based on Voltage)
50/51N
Internal CT Bus Wire Supervision
(based on voltage )
74TC Trip circuit Supervision
External Stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
6I+6U
24BO
16BI
IEC 61850,2-Optical Ports (PRP)
Relay Type:
REB650
Ordering code:
1MRK006520-AD
Built in Function:
87 3-Phase High Z Differential
(based on Voltage)
50/51N
Internal CT Bus Wire Supervision
(based on voltage )
74TC Trip circuit Supervision
External Stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
6I+4U
27BO
18BI
IEC 61850,2-Optical Ports (PRP)

Page 150 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Alstom Grid

FACTORY LOCATION
United Kingdom-Stafford

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
MCAG
Ordering code:
MCAG34VCD*****A
Built in Function:
87 3-Phase High Z Differential (Current Base)
External CT Bus Wire Supervision
External stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
3 CT Inputs
2 Output Contacts
Relay Type:
MCAG
Ordering code:
MCAG14SSD**** *A
Built in Function:
87 3-Phase High Z Differential
(Current Base)
External CT Bus Wire Supervision
External Stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
1 CT Phase Inputs
2 Output Contacts
Relay Type:
MFAC
Ordering code:
MFAC34V1B*0001A
Built in Function:
87 3-Phase High Z Differential
(Based on Voltage)
External CT Bus Wire Supervision
Internal Stabilizing Resistor
External Metrosil
External CT Shorting

Page 151 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Hardware:
3 elements / phases voltage based
2 Output Contacts
Relay Type:
MFAC
Ordering code:
MFACI4S1B*0001A
Built in Function:
87 3-Phase High Z Differential.
(Based on Voltage)
External CT Bus Wire Supervision
Internal Stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
1 elements / phases voltage based
4 Output Contacts

SIEMENS

GERMANY

Yes

Relay Type:
7SJ64
Ordering code:
7SJ6411-5EB92-1FE0+L0S
Built in Function:
87 3-Phase High Z Differential
(based on current)50/51N
Internal CT Bus Wire Supervision
(based on current )
74TC Trip circuit Supervision
External Stabilizing Resistor
External Metrosil
External CT Shorting
Hardware:
4 CT Inputs
13BO
15BI
IEC 61850, 2-Optical Ports (PRP)
Total =

31. 7. 10

Auxiliary Relays

Applicable Standards:

Page 152 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB

FACTORY LOCATION
SWEDEN---

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Relay Type:
RXMVB2
Ordering code:
RK 251 204-AP (125V DC)
RK 251 204-AN (110v DC)
Built in Function:
CT Shorting
Hardware:

Alstom

United Kingdom---

Yes

Relay Type:
MVTP31
Ordering code:
MVTP31V1CB0751E
Built in Function:
CT Supervision
Hardware:

SIEMENS

GERMANY

Yes

Relay Type:
AR 901
Ordering code:
7PG1110-7AE10-0AF0
Built in Function:
CT Shorting
Hardware:
Total =

31 . 8

TERMINAL BLOCK

31. 8. 0

TERMINAL BLOCK

Applicable Standards:

31-TMSS-06

Page 153 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Connectwell industries Pvt. Ltd.

FACTORY LOCATION
INDIA-Dombivli

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter# 13-07512-030504401 dated December
09, 2013, it is pre-qualified for terminal blocks as conforming to
National Grid SA specification # 31-TMSS-06, Rev.0 with the
following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer Connectwell industries
Pvt. Ltd., India through their letter # Nil dated November 27,
2012.

ENTRELEC

FRANCE

Yes

PHOENIX

GERMANY

Yes

WEIDMULLER

GERMANY

Yes

Wieland Electric GmbH

GERMANY-Bamberg

Yes

Based on S&SD letter# 13-05908-30504401 dated December


04, 2013, it is pre-qualified for terminal blocks as conforming to
National Grid SA specification # 31-TMSS-06, Rev.0 with the
following condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer Wieland Electric GmbH,
Germany-Bamberg through their letter # Bamberg dated July
20, 2012.

31 . 9

FAULT RECORDERS

31. 9. 0

FAULT RECORDERS

Total =

Total =

Applicable Standards:
AMETEK (ROCHESTER)

United States

Yes

QUALITROL HATHAWAY

NORTHERN IRELAND

Yes

31 . 10

DYNAMIC SYSTEM MONITORING EQUIPMENTS

31. 10. 0

DYNAMIC SYSTEM MONITORING EQUIPMENTS

Applicable Standards:

DIgSILENT GmbH

GERMANY

Yes

POWER TECHNOLOGY INC. (PTI)

United States

Yes

38-TMSS-06

Page 154 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
QUALITROL HATHAWAY

FACTORY LOCATION
NORTHERN IRELAND

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 12-03055-01-30504401 dated August 26,
2012, it is pre-qualified for Dynamic System Monitoring (DSM) as
conforming to SEC Specification # 38-TMSS-06, Rev.0 with the
following conditions:
All Factory tests shall be carried out on the first batch of
Dynamic System Monitoring (DSM) as per 38-TMSS-06, Rev.0 in
the presence of three (3) SEC Engineers. All costs related to the
tests shall be borne by the manufacturer. This prequalification
requirement was confirmed by Qualitrol-Hathaway, Belfast North
Ireland U.K in writing through their letter # Nil dated July 27,
2012.
Ten (10) years extended warranty in respect of defects due to
design , manufacturing, installation and workmanship from the
date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material supply
order as confirmed by Qualitrol-Hathaway, Belfast North Ireland
U.K through their letter # Nil dated May 18, 2010.
Total =

31 . 11

SUBSTATION AUTOMATION SYSTEM

31. 11. 0

SUBSTATION AUTOMATION SYSTEM

Applicable Standards:

Page 155 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB Automation Co. Ltd.

FACTORY LOCATION
Saudi Arabia-Riyadh

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter# 14-00953-1-30504401 dated February
27, 2014, ABB Automation Co. Ltd., Riyadh is pre-qualified for
integration and testing of SAS systems for substations rated up
to 230kV against specification # TES-P-107.01, Rev.00 with the
following conditions:
Type test shall be conducted on The SAS System as per
National Grid SA Specifications/Standards, IEC61850 Edition2,
and latest amendments of IEC in an accredited laboratory in
presence of three (03) SEC/National Grid SA engineers and one
(01) National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer by ABB-Riyadh through their letter #
PSN/SAS/0709/08/2013 dated July 09, 2013.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by ABB Automation Co. Ltd., Riyadh through
their letter # PSN/SAS/0110 dated January 28, 2012.
Bay Controller Unit (BCU) shall be type
REC670*1.2-B30X00-P02-B1X-BE-KB-B-B6X0-D1AD1D1D1-XXXXE.
All the protection IEDs shall be as per section 31.7 National
Grid SA list of technically acceptable manufacturers.
Station Computer, Gateway, EWS and OWS shall be from
Advantech Taiwan.
SAS network shall be provided with SAS oriented Industrial
type Ethernet Switches per SEC/National Grid SA approved list.
Software shall be Micro SCADA.

Page 156 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ABB Switzerland Ltd.( Global SAS Center)

FACTORY LOCATION
SWITZERLAND-Baden

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter# 14-00953-1-30504401 dated February
27, 2014, ABB Switzerland Ltd.( Global SAS Center), Baden,
Switzerland is pre-qualified for Engineering, integration and
testing of SAS systems for substations up to 380 kV against
specification # TES-P-107.01, Rev.00 with the following
conditions:
Type test shall be conducted on The SAS System as per
National Grid SA Specifications/Standards, IEC61850 Edition2,
and latest amendments of IEC in an accredited laboratory in
presence of three (03) SEC/National Grid SA engineers and one
(01) National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by the
manufacturer.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by ABB Switzerland Ltd. ( Global SAS
Center), through their letter # Nil dated April 29, 2012.
Bay Controller Unit (BCU) shall be type
REC670*1.2-B30X00-P02-B1X-BE-KB-B-B6X0-D1AD1D1D1-XXXXE.
All the protection IEDs shall be as per section 31.7 National
Grid SA list of technically acceptable manufacturers.
Station Computer, Gateway, EWS and OWS shall be from
Advantech Taiwan.
SAS network shall be provided with SAS oriented Industrial
Ethernet Switches per SEC/National Grid SA approved list.
Software shall be Micro SCADA.

Page 157 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ALSTOM Grid AG

FACTORY LOCATION
Saudi Arabia-Al-Khobar

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD letter# 14-00832-2-30504401 dated February
27, 2014, ALSTOM Grid AG France Montpelier/ U.K Stafford
with integration and testing facility in Al-Khobar, KSA is
pre-qualified for substations rated up to 380 kV against
specification # TES-P-107.01, Rev.00 with the following
conditions:
Type test shall be conducted on The SAS System as per
National Grid SA Specifications/Standards, IEC61850 Edition2,
and latest amendments of IEC in an accredited laboratory in
presence of three (03) SEC/National Grid SA engineers and one
(01) National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer by ALSTOM Grid AG France, U.K through their
letter SAS/TSSD/2014/WR1201-1 dated January 12, 2014.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by ALSTOM Grid AG France Montpelier &
U.K Stafford for Substation Automation System through their
letter # RN-2012-03-11SAS dated March 4, 2012 for SAS and
from ALSTOM integration facility through their letter # SAS/
TSSD/2014/2012/WR0202-2 dated March 5, 2012.
Bay Controller Unit (BCU) type MICOM C264 from ALSTOM
U.K Stafford is with ordering code
AGC264MB116910012X-Y-Z-PRP.
All the protection IEDs shall be as per section 31.7 National
Grid SA list of technically acceptable manufacturers.
SAS software - DS Agile,
SAS network shall be provided with SAS oriented Industrial
type Ethernet Switches per SEC/National Grid SA approved list.
SAS OI Server is provided with Advantech IPC (Taiwan),
SCADA gateway and IEC/IEC GTW is provided with Advantech
IPC(Taiwan), Workstation OI Viewer is provided with Advantech
IPC(Taiwan), EW is provided with Advantech IPC(Taiwan).

Page 158 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
SEL U.S.A

FACTORY LOCATION
Saudi Arabia-S.E.P - Riyadh

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on the S & SD letter# 14-01257-30504401 dated 23
March 2014, Schweitzer Engineering Laboratory (SEL) -U.S.A is
prequalified for Substation Automation System (SAS) with
Integration and Testing of SAS to be performed only by (SEL), at
System House Factory for Electric Panels (SEP) Riyadh K.S.A up
to 380KV subject to the following:
1. Type Tests: The manufacturer has confirmed to perform the
required type tests in Independent Testing laboratories- KEMA
as per SEC/National Grid SA requirements , IEC 81650 Edition 2
standards in the presence of three (3) SEC/National Grid SA
Engineers and one (1) Independent Inspector through reference
letter # SEL/SAS/08/2013.
2. Guarantee/Warranty: The manufacturer has agreed to give
guarantee/ warranty to SEC/National Grid SA for the proposed
Substation Automation System (SAS) from SEL U.S.A with
Integration & Testing facility at SEP Riyadh K.S.A in respect of
the defects due to design, manufacturing, installation and
workmanship for a period of ten (10) years , This was confirmed
in writing by the manufacturer through their letter ref: nil dated
February 18, 2013.
3. Bay Controller Unit (BCU) type SEL 451 from SEL U.S.A is
with ordering code 04515611XC2X4H64444X1.
4. All the protection IEDs shall be as per section 31.7 National
Grid SA list of technically acceptable manufacturers.
5. Station Computer (FESC) SEL-3355, Gateway SEL -3355,
EWS: SEL-3355, OWS: SEL-3355.
6. Software: Survalent Technology EMEA from U.S.A - the
software shall comprise of Survalent packages (Scada Manager,
Scada Explorer, and Worldview Professional).
7. SAS network shall be provided with SAS oriented Industrial
type Ethernet Switches per SEC/National Grid SA approved list.
Total =

32

METERS

32 . 1

KILOWATT HOUR METER (ENERGY METER)

32. 1. 0

KILOWATT HOUR METER (ENERGY METER)

Applicable Standards:

40-TMSS-02

Page 159 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ELSTER

FACTORY LOCATION
United States

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
PREVIOUSLY ABB (T &D)
Based on S&SD Letter 12-00932-1-30504401 dated March 25,
2012, it is pre-qualified for A3RAQ, A1860RALC and
A1860RAL meters as confirming to SEC Specification #
40-TMSS-02, Rev.0 with the following condition:
A3RAQ meters with configuration ZD3D44F00LD-16,
ZD3E44F00LD-16, ZD3D46000LD-16.
A1860RALC meters with configuration ZE3KM4CF5LK-EL.
A1860RAL meters with configuration ZE3KM4CF0LH-EL.
Free Supply of Meter Type A3RAQ: Five (5) Revenue Meters
Type A3RAQ shall be supplied free of cost to SEC as confirmed
through ELSTER letter # L1-ST12-001 dated January 21, 2012.
Five (5) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through ELSTER letter # NIL dated 12-01-2012.

GEC MEASUREMENT

United Kingdom

Yes

ISKRA MIS

SLOVENIA-KRANJ

Yes

SIEMENS

GERMANY

Yes

TYCO ELECTRONICS (UK) Ltd - CROMPTON


INSTRUMENTS

United Kingdom--

Yes

ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT


EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.
Based on TS&SD Letters (08-F00975/01-03032301 dated June
04, 2008), (10-F00230/01-03032301 dated February 03, 2010)
& (11-F03017/01-03032301 dated October 16, 2011). Integra
(1530, 1540, &1630) are prequalified for Digital Metering
Devices (NOT FOR BULK ENERGY METERS) as confirming to SEC
Specification # 40-TMSS-02, Rev.0 with the following condition:
Five (05) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order. This was
confirmed by TYCO Electronic UK through their letter #
INT-SEC-06 dated January 03, 2008 and its Amendment dated
November 21, 2011.
Total =

32 . 2

AMMETER, VOLTMETER, MW, MVAR

32. 2. 0

AMMETER, VOLTMETER, MW, MVAR

Applicable Standards:
AREVA

FRANCE

Yes

CELSA

ITALY

Yes

40-TMSS-02

Page 160 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
CEWE

SWEDEN--

Pre-Qualified
Manufacturers
By SEC
Yes

ENTES

TURKEY-ISTANBUL

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

Based on TS&SD letter # 10-F2298/03-03032301 dated


02/10/2010, it is pre-qualified for Digital Ammeter type
(EPM-34) and Digital Voltmeter type (EVM-35) as conforming to
SEC specification # 40-TMSS-02, Rev.0 with the following
condition:

ENTES (Turkey) has agreed to give SEC a


Guarantee/Warranty on the proposed digital meters for a period
of two (02) years and eight (08) years (for maintenance) for
total of ten (10) years from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order.

ISKRA MIS

SLOVENIA-KRANJ

Yes

ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT


EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.

SCHNEIDER ELECTRIC

CANADA--

Yes

DIGITAL POWER METERS TYPE ION 6200 (0.5% ACCURACY


CLASS); 10 YEARS EXTENDED WARRANTY

TYCO ELECTRONICS (UK) Ltd - CROMPTON


INSTRUMENTS

United Kingdom--

Yes

Based on TS&SD Letters (08-F00975/01-03032301 dated June


04, 2008), (10-F00230/01-03032301 dated February 03, 2010)
& (11-F03017/01-03032301 dated October 16, 2011). Integra
(1530, 1540, &1630) are prequalified for Digital Metering
Devices as confirming to SEC Specification # 40-TMSS-02, Rev.0
with the following condition:
Five (05) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order. This was
confirmed by TYCO Electronic UK through their letter #
INT-SEC-06 dated January 03, 2008 and its Amendment dated
November 21, 2011.
Total =

32 . 3
32. 3

AUTOMATIC METER READING (AMR) SYSTEM


AUTOMATIC METER READING (AMR) SYSTEM

Applicable Standards:

40-TMSS-03

ADVANCE ELECTRONICS CO., LTD.

Saudi Arabia-Riyadh

Yes

Based on approval of Executive Directive for TS&SD Letter #


08-1105-03032301 dated 20/10/2008, it is pre-qualified for
Energy Meters Type (ADDAD-4) & Quality Meters Type
(SEL-734).

ALps Technologies

FRANCE-ANNECY-LE-VIEUX

Yes

Based on TS&SD letter# 09-F00181/03-03032301 dated 06th.


April 2009 with (5) years warranty from the date of PAC

Page 161 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Electro Industries / GaugeTech

FACTORY LOCATION
United States-New York

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 13-00862/03-030504401 dated April 20,
2013, Electro Industries/ GaugeTech, New York, USA is
pre-qualified for Power Quality Meters type NEXUS 1500 as
conforming to National Grid SA specification # 40-TMSS-03,
Rev.0, with the following conditions:
Product Support: Continuous supply and product support of
Power Quality Meters type NEXUS 1500 to all SEC/National Grid
SA approved AMR Manufacturers for a minimum period of ten
(10) years shall be ensured as confirmed through their letter #
Nil dated January 01, 2012.
Product Demo: EIG Tech USA in coordination with their Local
Agent (Ideal Technical Solutions, Riyadh) shall demonstrate the
hardware and software capability and the features of NEXUS
1500 Power Quality Meters during the proposed Live Demo of
the AMR system to be conducted on the first order in presence
of SEC/National Grid SA Engineers as already confirmed through
item # 8 of ITS letter # L1-NG01-J13-006 dated February06,
2013.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
Electro Industries /Gauge Tech -New York, USA through their
letter # L1-NG01-J13-004 dated January 29, 2013.

ELSTER

United States

Yes

Based on S&SD Letter 12-00932-1-30504401 dated March 25,


2012, it is pre-qualified for A1884RALNC meters as confirming
to SEC Specification # 40-TMSS-03, Rev.0 with the following
conditions:
A1884RALNC meters with configuration ZE3KM4C4FLP-01
[ This Meter is approved for Revenue Meter Application only ].
Five (5) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through ELSTER letter # NIL dated 12-01-2012.

Page 162 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Ideal Technical Solutions (ITS)

FACTORY LOCATION
Saudi Arabia-Riyadh

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
AMI
Based on S&SD Letter 14-00090-1-30504401 dated January 09,
2014, it is pre-qualified for Advance Metering Infrastructure
(AMI) systems as conforming to National Grid SA Specification #
40-TMSS-03, Rev. 01 with the following conditions:
- Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery in case of direct material supply order as confirmed
through Ideal Technical Solutions (ITS), KSA, Riyadh letter
#W1-NG01-J14-001 dated January 01,2014 and
Letter#L1-NG01-J14-001 dated December 03, 2013.
- System Demo: Live Demo of the AMI System will be conducted
in presence of SEC/National Grid SA Engineers on the first
system to be manufactured in SEP factory already confirmed
through Ideal Technical Solutions (ITS), KSA, Riyadh letter
#L1-NG01-J14-002, dated January 06,2014.
AMR
Based on S&SD Letter 13-00971-1-30504401 dated May 15,
2013, it is pre-qualified for AMR system as conforming to
National Grid SA Specification # 40-TMSS-03, Rev.0 with the
following conditions:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award)or date of first
delivery in case of direct material supply order as confirmed
through Ideal Technical Solutions (ITS), KSA, Riyadh letter #
W1-NG01-J13-001 dated January 08, 2013 and L1-ST12-020
dated December 03, 2012.
System Demo: Live Demo of the AMR System will be
conducted in presence of SEC/National Grid SA Engineers on the
first system to be manufactured in SEP factory already confirmed
through item # 8 of letter # L1-NG01-J13-006, dated February
06, 2013.
ITS Integration & Test Facility: as per item# 3.a of ITS letter#
L1-NG01-J13-003 dated January 26, 2013.
Total =

33
33 . 1

CAPACITOR

SHUNT CAPACITOR

Page 163 of 190

SER
33. 1. 0

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

Applicable Standards:

SHUNT CAPACITOR
ABB

SWEDEN

Yes

REMARKS

43-TMSS-01
Based on TS&SD Letter # 10-00269-03032301 dated
24/01/2010, it is pre-qualified for Shunt Capacitor Banks as
confirming to SEC specification # 43-TMSS-01, rev.0 with the
following condition:
Seven (7) years warranty from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order.

ALSTOM Grid Ltd.

FINLAND-Tampere

Yes

Previously " Nokian Capacitors Ltd. Finland", the name has


been changed to Areva T&D Ltd. Finland based on TS&SD/ESD
Letter # 10-00145-03032301 dated January 16, 2010 and Areva
T&D Ltd.-Finland Letter # Nil dated January 04, 2010, then the
name has been changed again to ALSTOM Grid Ltd. Finland
based on Dept Mgr, S&SD E-mail dated February 26, 2012 and
ALSTOM Grid Ltd. letter # RN-2012-02-18 dated February 18,
2012.

COOPER (MCGRAW-ED)

United States

Yes

General Electric Energy-CPQP

United States-New York

Yes

Based on TS&SD fax ref.#08-F0623/01-03032301 dated


02/12/2008.
Pre-Qualified for Capacitor Bank (13.8kV through 380kV) with
this conditions:
-First batch shall be type test in an independent laboratory in
presence of (3) SEC engineers & (1) independent inspector.
-(10) years warranty

SAMWAH CAPACITOR CO. Ltd

KOREA, Republic of-Yongin-Si,

Yes

Based on TS&SD Letter # 11-02016/01-03032301 dated


06/07/2011, it is pre-qualified for Substation Type 13.8kV to
36kV Only Shunt Capacitor Banks as confirming to SEC
specification # 43-TMSS-01, Rev.0 with the following conditions:
All type, special, routine and sample tests as per SEC
specifications/standards shall be carried out on the first batch of
each type of capacitor bank (Substation Type 13.8kV to 36kV
Only Shunt Capacitor Banks) in case of securing an order in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector in an independent
testing laboratory. All the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by
SAMWAHA through letter # Nil dated 12/03/2010.
Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed by
SAMWAHA through letter # Nil dated 12/03/2010.

Page 164 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
VISHAY ELECTRONICS

FACTORY LOCATION
CZECH REPUBLIC-BLATNA

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD Letter # 10-F01787/03-03032301 dated
18/08/2010, it is pre-qualified for Shunt Capacitor Banks as
confirming to SEC specification # 43-TMSS-01, Rev.0 with the
following condition:
Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed by the
manufacturer as per submitted guaranty/warranty certificated
dated 28/05/2010G.

34

Total =

ELECTRONIC COMPONENTS

34 . 1

MODULAR PHOTOVOLTAIC POWER SUPPLY SYSTEMS

34. 1. 0

MODULAR PHOTOVOLTAIC POWER SUPPLY SYSTEMS


NEST OY/NAPS

35

Total =

Applicable Standards:
FINLAND

Yes

INSTRUMENT TRANFORMERS

35 . 1

33 & 34.5 KV CTS

35. 1. 0

33 & 34.5 KV CTS

Applicable Standards:
ABB ( T& D)

United States-N/A

Yes

ABB EJF

CZECH REPUBLIC

Yes

50-TMSS-01

Page 165 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Electrotecnica Arteche

FACTORY LOCATION
SPAIN-Mungia

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for 33 kV & 34.5 kV Current
Transformers (CTs) as confirming to SEC Specification #
50-TMSS-01 Rev.0 with the following conditions:
All Type, Routine and Special testes shall be carried out on
the first batch of 33 kV & 34.5 kV Current Transformers (CTs) kV
in an Independent Testing Laboratory in the presence of three
(3) SEC Engineers & one (1) SEC approved Independent
Inspection Agency (IIA) Inspector. All costs of which shall be
borne by the manufacturer. This was confirmed by the
manufacturer through their letter # Nil dated April 28, 2011G.
The complete tests in one (1) sample of Nynas Nytro 10 XN
Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.

GE

United States

Yes

KONCAR INSTRUMENT TRANSFORMERS INC.

Croatia/Hrvatska--

Yes

All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.

KUHLMAN ELECTRIC CORPORATION

United States

Yes

RING/SPLIT CORE TYPE

KWK MESWANDLER

GERMANY

Yes

RING TYPE

MEMF

Saudi Arabia-RIYADH

Yes

TS&SD letter# 09-00918-03032301 dated 29 March 2009 it is


prequalified for CT up to 36kV with the following conditions:
TYPE TEST SHALL BE DONE AT AN INTL. TESTING LAB IN
PRESENCE OF 3RD PARTY INSPECTOR;
EXTENDED GUARANTEE/ WARRANTY FOR 10 YEARS FROM
PAC.

PFIFFNER

SWITZERLAND

Yes

RING/SPLIT CORE TYPE

SADTEM

FRANCE

Yes

RING/SPLIT CORE TYPE & BLOCK TYPE CTs UP TO 36kV.

SIEMENS

United States

Yes

STE

ITALY

Yes

RING/SPLIT CORE TYPE

Page 166 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS
Total =

35 . 2

69KV CTS

35. 2. 0

69KV CTS

Applicable Standards:
ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ALSTOM (T & D) BALTEAU SA (NV)

BELGIUM

Yes

ALSTOM Grid

United States-Waynesboro

Yes

12

50-TMSS-01

Type test required in first supply; 10 Years Warranty from the


date of PAC is required.
Previously RITZ- United States [The name has been changed
based on S&SD/P&SFD letter # 13-06262-30504401 dated
December 02, 2013].

AREVA

United Kingdom

Yes

E. PFIFFNER

SWITZERLAND

Yes

Electrotecnica Arteche

SPAIN-Mungia

Yes

Based on S&SD Letter 12-03192-02-30504001 dated February


19, 2012, it is pre-qualified for 69 kV Current Transformers
(CTs) as confirming to SEC Specification # 50-TMSS-01 Rev.0
with the following conditions:
All Type, Routine and Special testes shall be carried out on the
first batch of 69 kV Current Transformers (CTs) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated April 28, 2011G.
The complete tests in one (1) sample of Nynas Nytro 10 XN
Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.

Page 167 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
GE

United States

Pre-Qualified
Manufacturers
By SEC
Yes

HAEFELY-TRENCH ELECTRIC

SWITZERLAND

Yes

HAEFELY-TRENCH ELECTRIC

FRANCE

Yes

KONCAR INSTRUMENT TRANSFORMERS INC.

Croatia/Hrvatska--

Yes

All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.

KUHLMAN ELECTRIC CORPORATION

United States

Yes

RING/SPLIT CORE TYPE

KWK MESWANDLER

GERMANY

Yes

RING TYPE

NISSIN

JAPAN

Yes

PFIFFNER

SWITZERLAND

Yes

RING/SPLIT CORE TYPE

SADTEM

FRANCE

Yes

RING/SPLIT CORE TYPE

SIEMENS

United States

Yes

STE

ITALY

Yes

RING/SPLIT CORE TYPE

TRENCH ITALIA

ITALY-N/A

Yes

PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL


TYPE

MANUFACTURER

FACTORY LOCATION

REMARKS

Total =

35 . 3

110 - 132 KV CTS

35. 3. 0

110 - 132 KV CTS

Applicable Standards:
ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ALSTOM (T & D) BALTEAU SA (NV)

BELGIUM

Yes

ALSTOM Grid

United States-Waynesboro

Yes

19

50-TMSS-01

Type test required in first supply;10 Years Warranty from the


date of PAC is required.
Previously RITZ- United States [The name has been changed
based on S&SD/P&SFD letter # 13-06262-30504401 dated
December 02, 2013].

AREVA

United Kingdom

Yes

Page 168 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Electrotecnica Arteche

FACTORY LOCATION
SPAIN-Mungia

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for 110 132 kV Current
Transformers (CTs) as confirming to SEC Specification #
50-TMSS-01 Rev.0 with the following conditions:
All Type, Routine and Special testes shall be carried out on the
first batch of 110 132 kV Current Transformers (CTs) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated April 28, 2011G.
The complete tests in one (1) sample of Nynas Nytro 10 XN
Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.

HAEFELY-TRENCH ELECTRIC

SWITZERLAND

Yes

HAEFELY-TRENCH ELECTRIC

FRANCE

Yes

KONCAR INSTRUMENT TRANSFORMERS INC.

Croatia/Hrvatska--

Yes

All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.

KUHLMAN ELECTRIC CORPORATION

United States

Yes

RING/SPLIT CORE TYPE

KWK MESWANDLER

GERMANY

Yes

RING TYPE

NISSIN

JAPAN

Yes

PFIFFNER

SWITZERLAND

Yes

RING/SPLIT CORE TYPE

SADTEM

FRANCE

Yes

RING/SPLIT CORE TYPE

STE

ITALY

Yes

RING/SPLIT CORE TYPE

TRENCH ITALIA

ITALY-N/A

Yes

PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL


TYPE
Total =

16

Page 169 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

35 . 4

230KV CTS

35. 4. 0

230KV CTS

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

Applicable Standards:
ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ALSTOM (T & D) BALTEAU SA (NV)

BELGIUM

Yes

ALSTOM Grid

United States-Waynesboro

Yes

REMARKS

50-TMSS-01

Type test required in first supply;10 Years Warranty from the


date of PAC is required.
Previously RITZ- United States [The name has been changed
based on S&SD/P&SFD letter # 13-06262-30504401 dated
December 02, 2013].

AREVA

United Kingdom

Yes

HAEFELY-TRENCH ELECTRIC

SWITZERLAND

Yes

HAEFELY-TRENCH ELECTRIC

FRANCE

Yes

KUHLMAN ELECTRIC CORPORATION

United States

Yes

RING/SPLIT CORE TYPE

KWK MESWANDLER

GERMANY

Yes

RING TYPE

NISSIN

JAPAN

Yes

PFIFFNER

SWITZERLAND

Yes

RING/SPLIT CORE TYPE

SADTEM

FRANCE

Yes

RING/SPLIT CORE TYPE

STE

ITALY

Yes

RING/SPLIT CORE TYPE

TRENCH ITALIA

ITALY-N/A

Yes

PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL


TYPE
Total =

35 . 5

380KV CTS

35. 5. 0

380KV CTS

Applicable Standards:
ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ALSTOM (T & D) BALTEAU SA (NV)

BELGIUM

Yes

14

50-TMSS-01

Page 170 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ALSTOM Grid

FACTORY LOCATION
United States-Waynesboro

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Type test required in first supply;10 Years Warranty from the
date of PAC is required.
Previously RITZ- United States [The name has been changed
based on S&SD/P&SFD letter # 13-06262-30504401 dated
December 02, 2013].

AREVA

United Kingdom

Yes

HAEFELY-TRENCH ELECTRIC

FRANCE

Yes

HAEFELY-TRENCH ELECTRIC

SWITZERLAND

Yes

KUHLMAN ELECTRIC CORPORATION

United States

Yes

RING/SPLIT CORE TYPE

KWK MESWANDLER

GERMANY

Yes

RING TYPE

NISSIN

JAPAN

Yes

PFIFFNER

SWITZERLAND

Yes

Based on TS&SD letter# 09-01105-03032301 dated 24th June


2009, it is pre-qualified for CT & CVT rated up to 380kV as
confirming to SEC specification # 50-TMSS-01, rev.0 & #
50-TMSS-02, rev.0 respectively with the following conditions:

All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in an independent testing laboratory in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

SADTEM

FRANCE

Yes

RING/SPLIT CORE TYPE

STE

ITALY

Yes

RING/SPLIT CORE TYPE

TRENCH ITALIA

ITALY-N/A

Yes

PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL


TYPE
Total =

36

14

POTENTIAL TRANSFORMER

36 . 1

33 & 34.5 KV POTENTIAL TRANSFORMERS

36. 1. 0

33 & 34.5 KV POTENTIAL TRANSFORMERS

Applicable Standards:

ABB ( T& D)

United States-N/A

Yes

ABB EJF

CZECH REPUBLIC

Yes

ALSTOM (T & D) BALTEAU SA (NV)

BELGIUM

Yes

AREVA

United Kingdom

Yes

50-TMSS-03

Page 171 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

E. PFIFFNER

SWITZERLAND

Pre-Qualified
Manufacturers
By SEC
Yes

Electrotecnica Arteche

SPAIN-Mungia

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

Based on S&SD Letter 12-03192-02-30504001 dated February


19, 2012, it is pre-qualified for 33 kV & 34.5 kV Potential
Transformers (PT) as confirming to SEC Specification
#50-TMSS-03 Rev.0 with the following conditions:
All Type, Routine and Special testes shall be carried out the
complete tests in one (1) sample of Nynas Nytro 10 XN Mineral
Oil on the first batch of 33 kV & 34.5 kV Potential Transformers
(PT) in an Independent Testing Laboratory in the presence of
three (3) SEC Engineers & one (1) SEC approved Independent
Inspection Agency (IIA) Inspector. All costs of which shall be
borne by the manufacturer. This was confirmed by the
manufacturer through their letter # Nil dated April 28, 2011G.
The complete tests in one (1) sample of Nynas Nytro 10 XN
Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.

GE

United States

Yes

HAEFELY-TRENCH ELECTRIC

FRANCE

Yes

HAEFELY-TRENCH ELECTRIC

SWITZERLAND

Yes

KONCAR INSTRUMENT TRANSFORMERS INC.

Croatia/Hrvatska--

Yes

All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.

Page 172 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
MEMF

FACTORY LOCATION
Saudi Arabia-RIYADH

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 12-00694-030504401 dated March 03,
2012. It is prequalified for Medium Voltage Resin Cast Indoor,
Potential Transformers with the following conditions:
This approval is restricted to Resin Cast, Indoor Potential
Transformers with accuracy class including 0.5/3P (0.5%) rated
up to 36kV. Any other accuracy class including 0.2/3P (0.2%)
will be considered only after submitting Type Test Reports
(acceptable to the Company) from Independent Laboratory as
confirmed by MEMF through Letter # NIL dated February 13,
2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or the date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated October 24, 2011.

NISSIN

JAPAN

Yes

SADTEM

FRANCE

Yes

SIEMENS

GERMANY

Yes

BLOCK TYPE PTs UP TO 36kV.

Total =

36 . 2

69 KV POTENTIAL TRANSFORMERS

36. 2. 0

69 KV POTENTIAL TRANSFORMERS

Applicable Standards:
ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ALSTOM (T & D) BALTEAU SA (NV)

BELGIUM

Yes

ALSTOM Grid

United States-Waynesboro

Yes

14

50-TMSS-03

Type test required in first supply;10 Years Warranty from the


date of PAC is required.
Previously RITZ- United States [The name has been changed
based on S&SD/P&SFD letter # 13-06262-30504401 dated
December 02, 2013].

AREVA

United Kingdom

Yes

E. PFIFFNER

SWITZERLAND

Yes

Page 173 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Electrotecnica Arteche

FACTORY LOCATION
SPAIN-Mungia

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for 69 kV Potential Transformers
(PT) as confirming to SEC Specification #50-TMSS-03 Rev.0 with
the following conditions:
All Type, Routine and Special testes shall be carried out the
complete tests in one (1) sample of Nynas Nytro 10 XN Mineral
Oil on the first batch of 69 kV Potential Transformers (PT) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated April 28, 2011G.
The complete tests in one (1) sample of Nynas Nytro 10 XN
Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.
Ten (10) years extended warranty from the date of PAC of
the first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.

HAEFELY-TRENCH ELECTRIC

SWITZERLAND

Yes

HAEFELY-TRENCH ELECTRIC

FRANCE

Yes

KONCAR INSTRUMENT TRANSFORMERS INC.

Croatia/Hrvatska--

Yes

NISSIN

JAPAN

Yes

All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.

Total =

36 . 3

110 - 132 KV POTENTIAL TRANSFORMERS

36. 3. 0

110 - 132 KV POTENTIAL TRANSFORMERS

Applicable Standards:

ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ALSTOM (T & D) BALTEAU SA (NV)

BELGIUM

Yes

11

50-TMSS-02,50-TMSS-03

Page 174 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
ALSTOM Grid

FACTORY LOCATION
United States-Waynesboro

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Type test required in first supply;10 Years Warranty from the
date of PAC is required.
Previously RITZ- United States [The name has been changed
based on S&SD/P&SFD letter # 13-06262-30504401 dated
December 02, 2013].

AREVA

United Kingdom

Yes

Electrotecnica Arteche

SPAIN-Mungia

Yes

Based on S&SD Letter 12-03192-02-30504001 dated February


19, 2012, it is pre-qualified for 110 132 kV Potential
Transformers (PT) as confirming to SEC Specification #
50-TMSS-03 Rev.0 with the following conditions:
All Type, Routine and Special testes shall be carried out the
complete tests in one (1) sample of Nynas Nytro 10 XN Mineral
Oil on the first batch of 110 132 kV Potential Transformers
(PT) in an Independent Testing Laboratory in the presence of
three (3) SEC Engineers & one (1) SEC approved Independent
Inspection Agency (IIA) Inspector. All costs of which shall be
borne by the manufacturer. This was confirmed by the
manufacturer through their letter # Nil dated April 28, 2011G.
The complete tests in one (1) sample of Nynas Nytro 10 XN
Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.

HAEFELY-TRENCH ELECTRIC

SWITZERLAND

Yes

HAEFELY-TRENCH ELECTRIC

FRANCE

Yes

KONCAR INSTRUMENT TRANSFORMERS INC.

Croatia/Hrvatska--

Yes

NISSIN

JAPAN

Yes

All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.

Page 175 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
PFIFFNER Instrument Transformers Ltd

FACTORY LOCATION
SWITZERLAND-Hirschthal

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 11-01326-02-03032301 dated
04/12/2011, it is pre-qualified for Inductive Voltage
Transformers from 110kV up to 230kV as confirming to SEC
specification # 50-TMSS-03, Rev.0 with the following conditions:

All type, special, routine and sample tests as per SEC


specifications/standards shall be carried out on the first unit of
Inductive Voltage Transformers to be supplied to SEC in case of
securing an order in the presence of three (3) SEC Engineers &
one (1) approved independent inspection agency Inspector in an
independent testing laboratory or at the manufacturers testing
laboratory. All the related costs for witnessing the tests will be
borne by the manufacturer. This was confirmed by PFIFFNER
Instrument Transformers Ltd through letter # P/900-17052011
dated 17 May 2011.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed by
PFIFFNER Instrument Transformers Ltd through letter # P/90025112010 dated 22 March 2011.
Total =

36 . 4

230 KV POTENTIAL TRANSFORMERS

36. 4. 0

230 KV POTENTIAL TRANSFORMERS

Applicable Standards:

ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ALSTOM (T & D) BALTEAU SA (NV)

BELGIUM

Yes

ALSTOM Grid

United States-Waynesboro

Yes

11

50-TMSS-02,50-TMSS-03

Type test required in first supply;10 Years Warranty from the


date of PAC is required.
Previously RITZ- United States [The name has been changed
based on S&SD/P&SFD letter # 13-06262-30504401 dated
December 02, 2013].

AREVA

United Kingdom

Yes

HAEFELY-TRENCH ELECTRIC

SWITZERLAND

Yes

HAEFELY-TRENCH ELECTRIC

FRANCE

Yes

MESWANDLER

GERMANY

Yes

NISSIN

JAPAN

Yes

Page 176 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
PFIFFNER Instrument Transformers Ltd

FACTORY LOCATION
SWITZERLAND-Hirschthal

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter # 11-01326-02-03032301 dated
04/12/2011, it is pre-qualified for Inductive Voltage
Transformers from 110kV up to 230kV as confirming to SEC
specification # 50-TMSS-03, Rev.0 with the following conditions:

All type, special, routine and sample tests as per SEC


specifications/standards shall be carried out on the first unit of
Inductive Voltage Transformers to be supplied to SEC in case of
securing an order in the presence of three (3) SEC Engineers &
one (1) approved independent inspection agency Inspector in an
independent testing laboratory or at the manufacturers testing
laboratory. All the related costs for witnessing the tests will be
borne by the manufacturer. This was confirmed by PFIFFNER
Instrument Transformers Ltd through letter # P/900-17052011
dated 17 May 2011.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed by
PFIFFNER Instrument Transformers Ltd through letter # P/90025112010 dated 22 March 2011.
Total =

36 . 5

380 KV POTENTIAL TRANSFORMERS

36. 5. 0

380 KV POTENTIAL TRANSFORMERS

Applicable Standards:

ABB

SWEDEN

Yes

ABB ( T& D)

United States-N/A

Yes

ALSTOM (T & D) BALTEAU SA (NV)

BELGIUM

Yes

ALSTOM Grid

United States-Waynesboro

Yes

10

50-TMSS-02,50-TMSS-03

Type test required in first supply;10 Years Warranty from the


date of PAC is required.
Previously RITZ- United States [The name has been changed
based on S&SD/P&SFD letter # 13-06262-30504401 dated
December 02, 2013].

AREVA

United Kingdom

Yes

HAEFELY-TRENCH ELECTRIC

SWITZERLAND

Yes

HAEFELY-TRENCH ELECTRIC

FRANCE

Yes

NISSIN

JAPAN

Yes
Total =

37

INSULATING OIL

Page 177 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

37 . 1

MINERAL OIL FOR ELECTRICAL APPARATUS

37. 1. 1

MINERAL OIL FOR ELECTRICAL APPARATUS

FACTORY LOCATION

Applicable Standards:

54-TMSS-01

---

Yes

CT, PT, POWER TRANSFORMER MANUFACTURERS CAN


PROCURE OIL MEETING ALL THE REQUIREMENTS OF
APPLICABLE STANDARD FROM ANY REPUTED OIL
MANUFACTURERS.

APAR INDUSTRIES LTD

INDIA-RABLE-NEW MUMBAI

Yes

Based on TS&SD letter # 11-00152-1-03032301 dated


22/01/2011, it is pre-qualified for Uninhibited Naphthenic
Mineral Insulating Oil type POWEROIL TO 1020 (60U) as
conforming to SEC specification # 54-TMSS-01, Rev.01 with the
following condition:

Five (5) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order.

CHEMTRADE/MOBIL OIL CO. LTD.

Saudi Arabia-YANBU

Yes

NYNAS

SWEDEN

Yes

PETROMIN CORPORATION (Petrolube)

Saudi Arabia-Jeddah

Yes

SAVITA

INDIA

Yes

SHELL

FRANCE

Yes

INSULATING OIL FOR LOW PRESSURE OIL FILLED (LPOF) CABLES

37. 2. 0

INSULATING OIL FOR LOW PRESSURE OIL FILLED (LPOF) CABLES

39 . 1

REMARKS

37 . 2

39

Pre-Qualified
Manufacturers
By SEC

Previously "PETROLUBE", the name has been change to


PETROMIN CORPORATION (Petrolube) - Saudi Arabia based on
PETROMIN CORPORATION letter # Nil dated 30/06/2010.

Total =

Total =

Applicable Standards:

ATOFINA CHEMICALS

United States

Yes

DIELECTRIC SYSTEM INC.

United States

Yes

FURAKAWA CABLES

JAPAN-FUJIKURA

Yes

INDOPOL

FRANCE-LAVERA

Yes

SIEMENS

GERMANY

Yes

TELECOMMUNICATION EQUIPMENT

FIBER OPTIC COMMUNICATION TERMINAL EQPT.

Page 178 of 190

SER
39. 1. 0

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

Applicable Standards:

FIBER OPTIC COMMUNICATION TERMINAL EQPT.


ABB

SWEDEN

Yes

ABB

SWITZERLAND

Yes

ALCATEL

FRANCE

Yes

REMARKS

48-TMSS-06

Based on TADD letter# 09-0576-030225, SCADA letter#


SOCW/DIV/97 and Telecomunication Dep. letter#
09-136-03040001.

Page 179 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
Alcatel-Lucent-ShangHai Bell Alcatel Co.Ltd(ASB)

FACTORY LOCATION
CHINA-ShangHai

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD letter #10-03519/03-03032301 dated
17/04/2011, it is pre-qualified for Fiber Optic Communication
Terminal type Optenix1660SM with the following conditions:

The first batch of each type of Optenix 1660SM to be


supplied to SEC shall be Type/Special & Routine/Sample tested
in an independent testing laboratory in the presence of three (3)
SEC engineers & one (1) SEC approved independent inspection
agency Inspector and all cost pertaining to the tests shall be
borne by Manufacturer. This was confirmed in writing by the
Alcatel-Lucent (ASB)-China through letter # ALU/172/SI/2010
dated 12/12/2010.

Ten (10) years extended warranty for the offered Optenix


1660SM from the date of PAC of the first turnkey project in case
of contract award or date of first delivery in case of direct
material supply order. This was confirmed in writing by A by the
Alcatel-Lucent (ASB)-China through letter # ALU/170/SI/2010
dated 12/12/2010.

Alcatel-lucent (ASB)-China has confirmed that after the


successful resolution of the prequalification process,
configuration as well as the drawings and details of the Trial Link
to be installed in SEC Network shall be submitted for SEC review
and approval. The places and dates of Trail Link installation will
be sent to the manufacturer.
----------------------------------------------------------------------Based on TS&SD letter # 11-03458/02-03032301 dated
03/12/2011, it's prequalified for Fiber Optics Terminal Equipment
1511MAX Series conforming to SEC Specification # 48-TMSS-06
Rev.0 with the following conditions:

Type, Special, sample & routine tests shall be conducted on


the first batch of 1511MAX Series to be supplied to SEC, in the
presence of three (3) SEC Engineers & one (1) SEC approved
independent inspection agency Inspector in an independent
testing laboratory. All the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by Alcatel
Lucent (ASB) Shanghai China through response letter #
ALU/25/SI/2011 dated 30/01/2011 and letter # Nil dated
27/04/2011.

Ten (10) years extended warranty from the date of PAC of


the first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed by Alcatel Lucent (ASB) Shanghai China through
letter # Nil dated 30/01/2011.

Page 180 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

Alcatel-lucent (ASB)-China has confirmed that after the


successful resolution of the prequalification process,
configuration as well as the drawings and details of the Trial Link
to be installed in SEC Network shall be submitted for SEC review
and approval. The places and dates of Trail Link installation will
be sent to the manufacturer.

Amwaj Telecommunication Manufacturing Co.

Saudi Arabia-Riyadh

Yes

Based on TS&SD letter # 11-F01302/03-03032301 dated


28/05/2011, it is prequalified for Telecommunication & Fiber
Optic Passive Products (Frame, Box, Rack, etc.) with the
following conditions:
All type, special, routine and sample tests as per SEC
specifications/standards
for Telecommunication & Fiber Optic Passive Products (Frame,
Box, Rack, etc.), shall be carried out in case of contract award or
SEC direct purchase order at SEC approved independent
laboratory in presence of three (3) SEC Engineers and one (1)
SEC approved independent inspection agency. All the related
costs for witnessing of the tests will be borne by the
manufacturer. This was confirmed by Amwaj Telecom MFG. Co.
letter dated 09/06/2010.
Seven (7) years extended warranty from the date of PAC of
the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed by
Amwaj Telecom MFG. Co. letter dated 09/06/2010.

AT & T (LUCENT TECHNOLOGIES)

United States

Yes

FUJITSU

JAPAN

Yes

GE Industrial System

CANADA-Ontario

Yes

Based on TADD letter# 09-0297-030225 dated 28th March


2009; (Note: GE Industrial System, Canada has bought only the
Lentronics business from Nortel, Canada that manufactures
TN1U SHD Fiber Optic Terminal Equipment and MUX)

Page 181 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER
HUAWEI TECHNOLOGIES CO.LTD.

FACTORY LOCATION
CHINA-Shenzhen

Pre-Qualified
Manufacturers
By SEC
Yes

REMARKS
Based on TS&SD Letter # 10-F01736/02-03032301 dated
18/08/2010, it is pre-qualified for Communication Transmission
Equipment (OSN Series:1500,2500,3500,7500,9500 and
iManager T2000NMS) with the following conditions:

All type/design, special & routine tests (for the first batch of
proposed Communication Transmission Equipment (OSN Series
and NMS) to be supplied to SEC shall be conducted in an
independent testing laboratory in the presence of three (3) SEC
engineers & one (1) SEC approved independent inspection
agency Inspector, the relevant cost of which shall be borne by
manufacturer. This was confirmed by the manufacturer as per
Huawei letter # 70917174/MRK/SEC dated 26/04/2010G.

Ten (10) years extended warranty for the proposed


Communication Transmission Equipment (OSN Series and NMS)
from the date of PAC of the turnkey project in case of contract
award or date of delivery in case of direct material supply order.
This was confirmed by the manufacturer as per Huawei letter #
70917174/MRK/SEC dated19/02/2008G.

NIPPON ELECTRIC CO. LTD.

JAPAN-TOKYO

Yes

NOKIA

FINLAND

Yes

NORTEL

CANADA

Yes

PHILIPS

HOLLAND

Yes

SIEMENS

GERMANY

Yes

TELETTRA

FRANCE

Yes

39 . 2

FIBER OPTIC LOW DENSITY EQPT.

39. 2. 0

FIBER OPTIC LOW DENSITY EQPT.

39 . 3

Total =

15

Total =

Applicable Standards:
ABB INFOCOM LTD.

FRANCE-TURGI

Yes

LICOM

United States

Yes

PRISM

CANADA

Yes

SIEMENS

GERMANY

Yes

POWER LINE CARRIER EQPT.

Page 182 of 190

SER
39. 3. 0

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

Applicable Standards:

POWER LINE CARRIER EQPT.


ABB

SWEDEN

Yes

ABB INFOCOM LTD.

FRANCE-TURGI

Yes

AREVA

FRANCE

Yes

GENERAL ELECTRIC CO.

United States-LYNCHBURG,

Yes

NERA

NORWAY

Yes

SIEMENS

GERMANY

Yes
Total =

39 . 4

TELE PROTECTION SYSTEM (TPS)

39. 4. 0

TELE PROTECTION SYSTEM (TPS)

39 . 5

CABLE ISOLATION EQPT.

39. 5. 0

CABLE ISOLATION EQPT.

Applicable Standards:
ABB

SWEDEN

Yes

AREVA

FRANCE

Yes

DIMAT

SPAIN-Barcelona

Yes

SIEMENS

GERMANY

Yes

Based on TS&SD Letters# 09-01439-2-03032301 dated 7th July


2009 & 10-00845-1-03032301 dated April 04, 2010. It is prequalified for Tele-protection Equipment type TPU-1 with the
following conditions:
Five (5) years Extended Warranty.

Total =

Total =

Total =

Applicable Standards:
POSITRON INDUSTRIES

CANADA-MONTREAL

39 . 6

PABXS TELEPHONE SETS, COMMUNICATION CABLES AND ACCESSORIES

39. 6. 1

CABLING ACCESSORIES

Yes

Applicable Standards:
RAYCHEM

United States-CA

Yes

Page 183 of 190

SER
39. 6. 2

39. 6. 3

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

ALCATEL NV

FRANCE-PARIS

Yes

AT & T

United States-NEW YORK

Yes

NORTHERN TELECOM

CANADA

Yes

PHILIPS

HOLLAND

Yes

SIEMENS

GERMANY

Yes

CANADA

VF INTERFACE EQPT.

39. 7. 0

VF INTERFACE EQPT.

39 . 8

DC POWER SYSTEMS

39. 8. 0

DC POWER SYSTEMS

Total =

Total =

Total =

Total =

Total =

Yes

Applicable Standards:

TELEPHONE EQUIPMENT PABXS AND ACCESSORIES


ERICSON

REMARKS

Applicable Standards:

PABXS TELEPHONE SETS, KEY SYSTEMS

39 . 7

Pre-Qualified
Manufacturers
By SEC

Applicable Standards:

PABXS TELEPHONE SETS, COMMUNICATION CABLES AND ACCESSORIES

MITEL CORP.

39. 6. 4

FACTORY LOCATION

SWEDEN

Yes

Applicable Standards:
ABB INFOCOM LTD.

SWITZERLAND-TURGI

Yes

TELLABS INC.

United States-N/A

Yes

Applicable Standards:
EXIDE CORP.

United States-PA

Yes

HARMER & SIMMONS

United Kingdom-ESSEX

Yes

LORAIN PRODUCTS INTERNATIONAL SALES

United States-LOARIN

Yes

SAFT POWER SYSTEMS SAS

FRANCE

Yes

Previously SAFT-NIFE

Page 184 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

39 . 9

TEST EQUIPMENT

39. 9. 0

TEST EQUIPMENT

MANUFACTURER

FACTORY LOCATION

Pre-Qualified
Manufacturers
By SEC

REMARKS

Applicable Standards:
ACTERNA

United States

Yes

ANDO ELECTRIC CO. LTD

JAPAN-TOKYO

Yes

HEWLETT PACKARD CO.

United States

Yes

IFR

United States-N/A

Yes

PHILIPS

United Kingdom-CAMBRIDGE

Yes

ROHDE & SCHWARZ

GERMANY-N/A

Yes

TREND

SPAIN

Yes

WANDEL & GOLTERMAN GMBH CO.

WEST GERMANY

Yes

39 . 10

TEST EQUIPMENT (FIBER OPTIC RELATED)

39. 10. 0

TEST EQUIPMENT (FIBER OPTIC RELATED)


ANRITSU CORPORATION

39 . 11

TEST EQUIPMENT (RADIO RELATED)

39. 11. 0

TEST EQUIPMENT (RADIO RELATED)

JAPAN-TOKYO

Yes

United Kingdom-N/A

Yes

TEST EQUIPMENT (RADIO/PAGING RELATED)


NEC

Total =

Total =

Applicable Standards:
United States-SOLON

39. 12. 0

Total =

Yes

MARCONI

TEST EQUIPMENT (RADIO/PAGING RELATED)

Applicable Standards:

BIRD

39 . 12

Total =

Applicable Standards:
United States

Yes

Page 185 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

39 . 13

RADIO/PAGING EQUIPMENT (MOBILE FIXED)

39. 13. 0

RADIO/PAGING EQUIPMENT (MOBILE FIXED)

Yes

GE/ERICSON

United States-N/A

Yes

GLENAYRE

CANADA- BC

Yes

KENWOOD

United States-CALIFORNIA

Yes

MOTOROLA

United States-SCHAMBURG IL

Yes

NEC

United States

Yes

NOKIA

FINLAND

Yes

PHILIPS

United Kingdom-CAMBRIDGE

Yes

39. 14. 0

RADIO/PAGING EQUIPMENT (ACCESSORIES)

39. 15. 0

UHF RADIO

REMARKS

Applicable Standards:
Saudi Arabia-AL-KHOBAR

RADIO/PAGING EQUIPMENT (ACCESSORIES)

UHF RADIO

Pre-Qualified
Manufacturers
By SEC

ELECTRONIA

39 . 14

39 . 15

FACTORY LOCATION

Total =

Total =

Applicable Standards:

ALLEN

United States-DALLAS TEXAS

Yes

ANDREW

United States- IL

Yes

ANTENNA SPECIALIST (AS)

United States- DALLAS TEXAS

Yes

CELWAVE

United States

Yes

DECIBEL

United States-DALLAS TEXAS

Yes

FLEXWELL

United States-N/A

Yes

JAYBEAM

United Kingdom- NORTHAMPTON Yes

RADIO SPARES (RS)

United Kingdom-NORTHANTS

Yes

Applicable Standards:
ALCATEL

FRANCE

Yes

ASCOM

United Kingdom

Yes

SIMOCO

United Kingdom

Yes

Page 186 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

39 . 16

HIGH DIGITAL SUBSCRIBER LINE (HDSL)

39. 16. 0

HIGH DIGITAL SUBSCRIBER LINE (HDSL)

REMARKS

Yes

NOKIA

FINLAND

Yes

NORTEL

CANADA

Yes

39. 17. 0

PAX (TELEPHONE EXCHANGE)

Total =

Total =

Total =

Total =

Applicable Standards:
SWEDEN

PAX (TELEPHONE EXCHANGE)


Applicable Standards:
ALCATEL

FRANCE

Yes

NORTEL

CANADA

Yes

SIEMENS

GERMANY

Yes

FIRE PROTECTION SYSTEM

40 . 1

FM 200 SYSTEM

40. 1. 1

GAS CYLINDERS & ACCCESSORIES

40. 1. 2

Pre-Qualified
Manufacturers
By SEC

ABB

39 . 17

40

FACTORY LOCATION

Applicable Standards:
DUEPOINT

United States

Yes

GREAT LAKES

United States

Yes

Applicable Standards:

EQUIPMENT

Yes

Based on TS&SD Letter # 10-2425/02-03032301 dated


31/08/2010, it is pre-qualified for HFC227ea system (FM 200) as
confirming to SEC specification # TES-B-106.05.

ANSUL

United States

Yes

LOCAL AGENT AL-BILAD

CHEMETRON

United States

Yes

LOCAL AGENT HEBA

FENWAL

United States

Yes

LOCAL AGENT ENERGY HOUSE

Page 187 of 190

SER

METERIAL / EQUIPMENT
DESCRIPTION
FIGGIE

United States

Pre-Qualified
Manufacturers
By SEC
Yes

FIKE

United States

Yes

FIREATER

United States

Yes

HYGOOD

United States

Yes

KIDDE

United States

Yes

Minimax

GERMANY-Bad Oldesloe

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

Based on S&SD Letter 12-02704-02-30504001 dated February


19, 2012. It is pre-qualified for Fire Protective Signaling Panel as
conforming to SEC Specification # 90-TMSS-01 Rev.0 with the
following condition:
All Type, Routine and Special testes shall be carried out on the
first batch of Fire Protective Signaling Panel in an Independent
Testing Laboratory in the presence of three (3) SEC Engineers &
one (1) SEC approved Independent Inspection Agency (IIA)
Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # Nil dated January 09, 2011.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Minimax-Germany letter # NIL dated January 09, 2011.

Siemens Building Technologies

40 . 2

WATER SPRAY SYSTEM

40. 2. 1

DELUGE VALVE, SPRAY NOZZLE, ALARM VALVE AND SPRINKLERS

40 . 3

United States-Buffalo Grove

Yes

Based on TS&SD Letter # 10-2425/02-03032301 dated


31/08/2010, it is pre-qualified for HFC227ea system (FM 200) as
confirming to SEC specification # TES-B-106.05, Rev.0
Total =

11

Total =

Applicable Standards:

GRINNEL

United States

Yes

RELIABLE

United States

Yes

SPRAYSAFE

United States

Yes

VIKING

United States

Yes

WATTS

United States

Yes

LOCAL AGENT AL-BILAD

LOCAL AGENT AL-BILAD

CARBON DIOXIDE (CO2) SYSTEM

Page 188 of 190

SER
40. 3. 1

METERIAL / EQUIPMENT
DESCRIPTION

MANUFACTURER

FACTORY LOCATION

CARDOX

United States

Yes

LOCAL AGENT HEBA

CHEMETRON

United States

Yes

LOCAL AGENT HEBA

FIKE

United States

Yes

...

HYGOOD

United States

Yes

KIDDE

United States

Yes

40 . 4

FIRE FIGHTING WATER PUMPS

40. 4. 1

FIRE WATER PUMPS & ACCESSORIES

FOAM SYSTEM

40. 5. 1

FOAM SYSTEM & ACCESSORIES

40 . 6

FIRE EXTINGUISHER

40. 6. 1

PORTABLE / MOBILE

REMARKS

Applicable Standards:

GAS CYLINDERS & ACCCESSORIES

40 . 5

Pre-Qualified
Manufacturers
By SEC

LOCAL AGENT ENERGY HOUSE


Total =

Total =

Total =

Applicable Standards:

AURORA

United States

Yes

LOCAL AGENT SAUDI PUMP >= 500 GPM

FAIRBANK MORSE

United States

Yes

LOCAL AGENT SAUDI PUMP >=500GPM

FLOWAY

United States

Yes

ITT

United States

Yes

PEERLESS

United States

Yes

PETTERSON

United States

Yes

REDDY BUFFALOU

United States

Yes

WORTHINGTON

United States

Yes

LOCAL AGENT SAUDI PUMP >=500GPM

LOCAL AGENT SAUDI PUMP >=500GPM

Applicable Standards:
ANGUS

United Kingdom

Yes

CHEMGUARD

United States

Yes

LOCAL AGENT NAFISCO

NATIONAL FOAM

United States

Yes

LOCAL AGENT HEBA

Applicable Standards:

Page 189 of 190

SER

40. 6. 2

40. 6. 3

40. 6. 4

METERIAL / EQUIPMENT
DESCRIPTION
HEBA

Saudi Arabia

Pre-Qualified
Manufacturers
By SEC
Yes

SFFECO

Saudi Arabia

Yes

MANUFACTURER

FACTORY LOCATION

REMARKS

ANSUL

United States

Yes

LOCAL AGENT AL-BILAD >=5 LBS

KIDDE

United States

Yes

>=5 LBS

SENTRY

United States

Yes

LOCAL AGENT AL-BILAD >=5 LBS

ANSUL

United States

Yes

LOCAL AGENT AL-BILAD >=2 LBS

SENTRY

United States

Yes

LOCAL AGENT AL-BILAD >=2 LBS

40. 7. 1

EQUIPMENT & ACCESSORIES

Total =

Total =

Applicable Standards:

PORTABLE FIRE EXTINGUISHER, WATER TYPE

FIRE DETECTION AND ALARM SYSTEM

Total =

Applicable Standards:

PORTABLE FIRE EXTINGUISHER, DRY CHEMICAL TYPE

40 . 7

Applicable Standards:

PORTABLE FIRE EXTINGUISHER, CO2 TYPE

SENTRY

Total =

United States

Yes

LOCAL AGENT AL-BILAD >=2.5 LBS

Applicable Standards:
AUTOCALL (GRINNEL)

United States

Yes

EDWARDS

CANADA

Yes

MIRETONE

United States

Yes

NOTIFIRE

United States

Yes

LOCAL AGENT -NAFISCO

Siemens Building Technologies Fire Safety

United States-New Jersey

Yes

Originaly was PYROTRONICS from USA.


Local Agents are: Siemens Building Technologies (SBT) &
SASEEQ

SIMPLEX

United States

Yes

LOCAL AGENT NAFISCO

THORN

United Kingdom

Yes

LOCAL AGENT AL-BILAD

Total =

Page 190 of 190

You might also like