You are on page 1of 2

Catalog

Number
Notes

FEATURES & SPECIFICATIONS

Type

INTENDED USE The PROTEON SL LED luminaire offers commercial building owners, retailers and
institutions an innovative, continuous-row solution that better utilizes light to emphasize areas of focus
while reducing energy. Using custom optics, the luminaire can provide unparalleled uniformity and achieve
a horizontal-to-vertical light ratio not attainable through previous technologies.
CONSTRUCTION Extruded housing and heat sink made from 6063-T5 aluminum allows for superior
thermal management to reduce both LED and driver temperatures. Clear anodized finish is standard to resist
scratching, corrosion and provide refined appearance. The joiners and modules are made from die-cast, zinc
alloy which reduces electro-magnetic interference (EMI) and offers improved thermals over alternative
materials. Joiners and modules are painted with baked enamel; five-stage iron phosphate pre-treatment
ensures superior adhesion.

LED Linear Luminaire

PTNSL

OPTICS Proprietary lensing engineered using precision-molded acrylic. The lenses work together
with die-formed reflectors utilizing highly reflective WhiteOptic coating to improve light on task. Optical
patterns range from aisle-specific to open area distributions. Pixelation is eliminated through the use of
lenticular ribs on each lens in combination with semi-diffuse overlay inside the optical chamber.
ELECTRICAL L70 at 60,000 hours. Thermally protected, high-efficiency driver(s) standard with 0-10V
dimming down to 10%. Each 4 or 8 rail contains one driver. LED light engine features OSRAM Duris E5 .25W
LEDs which use mating connectors to eliminate wiring inside optical chamber.
LISTINGS CSA listed to U.S. and Canadian safety standards (UL 1598 and C22.2NO.250.0-08). For use
in damp locations. US patents pending. Suitable for ambient temperatures from +5C (+41F) to +40C
(+105F). DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC
qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which
versions are qualified.
WARRANTY 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

CONFIGURATIONS

NOTE: Actual performance may differ as a result of end-user environment and application.

LENGTH

NOMINAL LUMENS

WATTAGE

Approximately equivalent

4'

3,500

40

2/32T8 or 1/54T5HO

8'

7,300

81

4/32T8 or 2/54T5HO

All values are design or typical values, measured under laboratory conditions at 25 C.
Specifications subject to change without notice.

ORDERING INFORMATION
PTNSL

OSR2

Series
PTNSL4
PTNSL8

Example: PTNSL AD2 MVOLT OSR2 41K 80CRI DSPD

Lead times will vary depending on options selected. Consult with your sales representative.

4'
8'

Distribution

Voltage

AD1
AD2
ND
WD

MVOLT
120
208
240
277

Aisle, 17 off center


Aisle, 24 off center
Narrow area
Wide area

Driver
MVOLT
120V
208V
240V
277V

OSR2

Osram driver,
dims to 1%

Color temperature

Color rendering index

35K
41K
50K

80CRI

3500 K
4100 K
5000 K

Options
CRE
CRM
PLR1G
PLR22G
PLR1LVG

80CRI

Joiner finish
Continuous row, end, one end cap
included
Continuous row, middle, no end caps
included
Single-circuit through wire
Two-circuit alternating, through wire
Single-circuit through wire, low voltage

PLR22LVG
PLR2ALVG
PLR2BLVG
GLR
CS95BL

Alternating two-circuit through wire, low voltage


Two-circuit through wire, with A circuit
connected to driver
Two-circuit through wire, with B circuit
connected to driver
Internal fast-blow fuse1
Cord no plug, black2

CS12BL
CS2BL
UPL2
NES7
E7W
PTNSLBRG XXX

277V twist-lock, black


120V straight plug, black1,2
Up light, non-dimming3
Occupancy/sensor 1,4,5
Emergency battery pack4
Bridge system for
continuous row mounting 6
1,2

DSPD
DNA
DWH

Textured
dark gray
Natural
aluminum
White

Notes
1
2

Accessories: Order as separate catalog number.


AFAC120
ZAC120
ZACFP120
ZACFPD120
ZAC240
ZACFP240
ZACFPD240
TGCLP
PTNSL SBL46 XXX

Adjustable aircraft cable, 120" 7


One adjustable aircraft cable with canopy, 120" 7
One adjustable aircraft cable with feed (3 conductor) and canopy, 120" 7
One adjustable aircraft cable with feed (5 conductor) and canopy, 120" 7
One adjustable aircraft cable with canopy, 240" 7
One adjustable aircraft cable with feed (3 conductor) and canopy, 240" 7
One adjustable aircraft cable with feed (5 conductor) and canopy, 120" 7
T-grid clips 8
Straight blade louver 6

Replacement parts
DPTNSL4
DPTNSL4
DPTNSL4
DPTNSL4

AD1
AD2
ND
WD

Aisle, 17 off center 9


Aisle, 24 off center 9
Narrow area 9
Wide area 9

3
4
5
6
7
8
9

Must specify voltage.


All cords are 16/3, 6' black. If plug is included voltage must
be specified. Other configurations available, consult factory.
White cords available, replace BL with W. (EX. CS93W).
Only available in 8' with LP835 and LP841.
Requires some field assembly. 120 or 277 volt only. Available as
a factory option only.
Available with 8' unit only.
XXX denotes color (EX. PTNSL SBL46 DNA).
Bracket spacing for PTNSL4 min. 28", max.44"; for PTNSL8 min.
48", max. 88".
Compatible with ZAC120, ZACFP120, ZAC240 and ZACFP240.
PTNSL4 two lenses per fixture; PTNSL8 four lenses per fixture.

INDUSTRIAL PTNSL

PROTEON SL LED
Dimensions
All dimensions are in inches (centimeters) unless otherwise noted.
Specifications subject to change without notice.

3-3/8
(8.6)
50-3/4
(128.9)

3-3/8
(8.6)

3-3/8
(8.6)
96-3/4
(245.7)

3-3/8
(8.6)

Light Distributions

AD1

ND

AD2

WD

Photometrics
See www.lithonia.com

PTNSL

INDUSTRIAL:

One Lithonia Way Conyers, GA 30012

Phone: 800-315-4963

www.lithonia.com

2012-2016 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/15/16

You might also like