You are on page 1of 32

Worksheet for Concrete Design Mix

PROJECT: Repair / Rehab of MP Bldg. Mamburao Central School


LOCATION: Mamburao, Occidental Mindoro
CONTRACTOR: SUI GENERIS Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------3.02


Specific Gravity ----------------------2.69
Moisture Content ----------------------1.57
Absorption %
----------------------2.2
Unit Weight, kg/cu.m (loose)-------1560
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
34
2.82
1.46
2.15
1610

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02641 cu.m.

0.05508 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-1.58944
Corrected F.A.=,%
32.41056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

32.41056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02641
0.05508
0.01692

3.15
2.69
2.82
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.60
3.38
18.44

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
71.05
155.32
16.92

KG.
CU. FT.
CU. FT.
Liters
Checked by:

NILO HERNANDEZ
Project Material Engineer
Contractor

SALVADOR E. ABAD
Engineer III
Chief, MQC Section

40.00
70.60
154.25
18.44

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------3.02
Difference from Standard =
2.75 3.02
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

0.27
0.1

-0.1469722222

0.50%

0.27

1.35

Total Correction= -1.5894444444


Thus Correction for F.A., cu.m.=

34 +

-1.589444444 =

32.4105555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
70.60 KG
C.A.=
154.25 KG.
WATER=
18.44 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Repair of Kurtinganan B/R
LOCATION: Sta Cruz , Occidental Mindoro
CONTRACTOR: Mercedita Benasas Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------2.92


Specific Gravity ----------------------2.33
Moisture Content ----------------------1.51
Absorption %
----------------------1.37
Unit Weight, kg/cu.m (loose)-------1532
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
35
2.93
1.48
2.44
1573

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02600 cu.m.

0.05549 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-2.08944
Corrected F.A.=,%
31.91056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

31.91056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02600
0.05549
0.01692

3.15
2.33
2.93
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.40
3.61
18.40

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
60.59
162.58
16.92

40.00
60.68
161.02
18.40

KG.
CU. FT.
CU. FT.
Liters
Checked by:

JOHNNY ANOVA
Project Material Engineer
Contractor

SALVADOR E. ABAD
Engineer III
Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------2.92
Difference from Standard =
2.75 2.92
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

0.17
0.1

-0.1469722222

0.50%

0.17

0.85

Total Correction= -2.0894444444


Thus Correction for F.A., cu.m.=

34 +

-2.089444444 =

31.9105555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
60.68 KG
C.A.=
161.02 KG.
WATER=
18.40 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Const. Of MP Bldg. Gapasan
LOCATION: Magsaysay , Occidental Mindoro
CONTRACTOR: N.B. Garcia Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------2.66


Specific Gravity ----------------------2.4
Moisture Content ----------------------1.41
Absorption %
----------------------1.32
Unit Weight, kg/cu.m (loose)-------1540
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
35
2.86
1.44
2.72
1571

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02495 cu.m.

0.05655 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-3.38944
Corrected F.A.=,%
30.61056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

30.61056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02495
0.05655
0.01692

3.15
2.40
2.86
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.37
3.59
18.94

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
59.87
161.72
16.92

40.00
59.92
159.65
18.94

KG.
CU. FT.
CU. FT.
Liters
Checked by:

ANGELITA A. GARCIA
Project Material Engineer
Contractor

SALVADOR E. ABAD
Engineer III
Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------2.66
Difference from Standard =
2.75 2.66
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

-0.09
0.1

-0.1469722222

0.50%

-0.09

-0.45

Total Correction= -3.3894444444


Thus Correction for F.A., cu.m.=

34 +

-3.389444444 =

30.6105555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
59.92 KG
C.A.=
159.65 KG.
WATER=
18.94 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Repair of Cabacao Bridge Approach " B " Bagong Silang
LOCATION: Cabacao , Occidental Mindoro
CONTRACTOR: L.E. Samson Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------2.88


Specific Gravity ----------------------2.42
Moisture Content ----------------------1.35
Absorption %
----------------------1.34
Unit Weight, kg/cu.m (loose)-------1540
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
33
2.74
1.64
3.03
1640

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02584 cu.m.

0.05565 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-2.28944
Corrected F.A.=,%
31.71056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

31.71056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02584
0.05565
0.01692

3.15
2.42
2.74
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.43
3.24
19.03

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
62.54
152.48
16.92

40.00
62.54
150.36
19.03

KG.
CU. FT.
CU. FT.
Liters
Checked by:

RAYMUNDO MARQUEZ
Project Material Engineer

SALVADOR E. ABAD
Engineer III

Contractor

Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------2.88
Difference from Standard =
2.75 2.88
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

0.13
0.1

-0.1469722222

0.50%

= 0.13

= 0.65

Total Correction= -2.2894444444


Thus Correction for F.A., cu.m.=

34 +

-2.289444444 =

31.7105555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
62.54 KG
C.A.=
150.36 KG.
WATER=
19.03 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Const. Of MPB DPWH Compound
LOCATION: Mamburao, Occidental Mindoro
CONTRACTOR: R. ANIN JR. Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus
----------------------2.65
Specific Gravity
----------------------2.69
Moisture Content ----------------------1.25
Absorption %
----------------------2.2
Unit Weight, kg/cu.m (loose)-------1560
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
34
2.82
1.21
2.15
1610

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02490 cu.m.

0.05659 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-3.43944
Corrected F.A.=,%
30.56056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

30.56056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02490
0.05659
0.01692

3.15
2.69
2.82
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.50
3.46
19.06

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
66.99
159.58
16.92

40.00
66.36
158.08
19.06

KG.
CU. FT.
CU. FT.
Liters
Checked by:

REYNERIO ANIN JR.


Project Material Engineer
Contractor

SALVADOR E. ABAD
Engineer III
Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------2.65
Difference from Standard =
2.75 2.65
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

-0.1
0.1

-0.1469722222

0.50%

-0.1

-0.5

Total Correction= -3.4394444444


Thus Correction for F.A., cu.m.=

34 +

-3.439444444 =

30.5605555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
66.36 KG
C.A.=
158.08 KG.
WATER=
19.06 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Const. Of Pagbahan F/C Phase II
LOCATION: Sta Cruz , Occidental Mindoro
CONTRACTOR: Niwadis Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------2.89


Specific Gravity ----------------------2.42
Moisture Content ----------------------1.38
Absorption %
----------------------1.34
Unit Weight, kg/cu.m (loose)-------1540
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
33
2.74
1.56
3.03
1640

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02588 cu.m.

0.05561 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-2.23944
Corrected F.A.=,%
31.76056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

31.76056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02588
0.05561
0.01692

3.15
2.42
2.74
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.44
3.23
19.14

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
62.63
152.37
16.92

40.00
62.66
150.13
19.14

KG.
CU. FT.
CU. FT.
Liters
Checked by:

EMIGDIO SALES
Project Material Engineer
Contractor

SALVADOR E. ABAD
Engineer III
Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------2.89
Difference from Standard =
2.75 2.89
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

0.14
0.1

-0.1469722222

0.50%

0.14

0.7

Total Correction= -2.2394444444


Thus Correction for F.A., cu.m.=

34 +

-2.239444444 =

31.7605555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
62.66 KG
C.A.=
150.13 KG.
WATER=
19.14 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Const. Of Various S/B Sta Cruz
LOCATION: Sta Cruz , Occidental Mindoro
CONTRACTOR: Sui Generis Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------2.76


Specific Gravity ----------------------2.4
Moisture Content ----------------------1.38
Absorption %
----------------------1.19
Unit Weight, kg/cu.m (loose)-------1530
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
35
2.86
1.36
2.67
1546

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02535 cu.m.

0.05614 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-2.88944
Corrected F.A.=,%
31.11056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

31.11056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02535
0.05614
0.01692

3.15
2.40
2.86
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.41
3.62
18.91

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
60.85
160.56
16.92

40.00
60.96
158.45
18.91

KG.
CU. FT.
CU. FT.
Liters
Checked by:

NILO HERNANDEZ
Project Material Engineer
Contractor

SALVADOR E. ABAD
Engineer III
Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------2.76
Difference from Standard =
2.75 2.76
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

0.01
0.1

-0.1469722222

0.50%

= 0.01

= 0.05

Total Correction= -2.8894444444


Thus Correction for F.A., cu.m.=

34 +

-2.889444444 =

31.1105555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
60.96 KG
C.A.=
158.45 KG.
WATER=
18.91 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Const. Of Various S/B Magsaysay
LOCATION: Magsaysay , Occidental Mindoro
CONTRACTOR: Sui Generis Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------2.49


Specific Gravity ----------------------2.41
Moisture Content ----------------------1.52
Absorption %
----------------------1.01
Unit Weight, kg/cu.m (loose)-------1551
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
33
2.91
1.28
2.56
1585

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02425 cu.m.

0.05724 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-4.23944
Corrected F.A.=,%
29.76056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

29.76056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02425
0.05724
0.01692

3.15
2.41
2.91
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.34
3.66
18.76

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
58.45
166.57
16.92

40.00
58.75
164.43
18.76

KG.
CU. FT.
CU. FT.
Liters
Checked by:

NILO HERNANDEZ
Project Material Engineer

SALVADOR E. ABAD
Engineer III

Contractor

Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------2.49
Difference from Standard =
2.75 2.49
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

-0.26
0.1

-0.1469722222

0.50%

= -0.26

= -1.3

Total Correction= -4.2394444444


Thus Correction for F.A., cu.m.=

34 +

-4.239444444 =

29.7605555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
58.75 KG
C.A.=
164.43 KG.
WATER=
18.76 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Const. Of Various S/B San Agustin
LOCATION: San Jose , Occidental Mindoro
CONTRACTOR: Sui Generis Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------2.49


Specific Gravity ----------------------2.4
Moisture Content ----------------------1.52
Absorption %
----------------------1.16
Unit Weight, kg/cu.m (loose)-------1549
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
32
2.73
1.29
2.3
1564

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02425 cu.m.

0.05724 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-4.23944
Corrected F.A.=,%
29.76056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

29.76056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02425
0.05724
0.01692

3.15
2.40
2.73
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.33
3.49
18.29

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
58.21
156.26
16.92

40.00
58.42
154.68
18.29

KG.
CU. FT.
CU. FT.
Liters
Checked by:

NILO HERNANDEZ
Project Material Engineer

SALVADOR E. ABAD
Engineer III

Contractor

Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------2.49
Difference from Standard =
2.75 2.49
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

-0.26
0.1

-0.1469722222

0.50%

= -0.26

= -1.3

Total Correction= -4.2394444444


Thus Correction for F.A., cu.m.=

34 +

-4.239444444 =

29.7605555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
58.42 KG
C.A.=
154.68 KG.
WATER=
18.29 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Const. Of 2CL S/B Alitaytayin
LOCATION: San Jose , Occidental Mindoro
CONTRACTOR: N.B. Garcia Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------3.01


Specific Gravity ----------------------2.4
Moisture Content ----------------------1.42
Absorption %
----------------------1.16
Unit Weight, kg/cu.m (loose)-------1549
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
32
2.73
1.38
2.3
1564

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02637 cu.m.

0.05512 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-1.63944
Corrected F.A.=,%
32.36056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

32.36056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02637
0.05512
0.01692

3.15
2.40
2.73
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.45
3.36
18.14

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
63.29
150.48
16.92

40.00
63.46
149.09
18.14

KG.
CU. FT.
CU. FT.
Liters
Checked by:

ANGELITA GARCIA
Project Material Engineer

SALVADOR E. ABAD
Engineer III

Contractor

Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------3.01
Difference from Standard =
2.75 3.01
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

0.26
0.1

-0.1469722222

0.50%

= 0.26

= 1.3

Total Correction= -1.6394444444


Thus Correction for F.A., cu.m.=

34 +

-1.639444444 =

32.3605555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
63.46 KG
C.A.=
149.09 KG.
WATER=
18.14 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Const. Of 2 CL S/B Purnaga E/S
LOCATION: Magsaysay , Occidental Mindoro
CONTRACTOR: Sui Generis Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------2.63


Specific Gravity ----------------------2.41
Moisture Content ----------------------1.26
Absorption %
----------------------1.01
Unit Weight, kg/cu.m (loose)-------1551
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
33
2.91
1.2
2.56
1585

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02482 cu.m.

0.05667 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-3.53944
Corrected F.A.=,%
30.46056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

30.46056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02482
0.05667
0.01692

3.15
2.41
2.91
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.36
3.62
19.01

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
59.82
164.91
16.92

40.00
59.97
162.66
19.01

KG.
CU. FT.
CU. FT.
Liters
Checked by:

NILO HERNANDEZ
Project Material Engineer

SALVADOR E. ABAD
Engineer III

Contractor

Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------2.63
Difference from Standard =
2.75 2.63
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

-0.12
0.1

-0.1469722222

0.50%

= -0.12

= -0.6

Total Correction= -3.5394444444


Thus Correction for F.A., cu.m.=

34 +

-3.539444444 =

30.4605555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
59.97 KG
C.A.=
162.66 KG.
WATER=
19.01 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Const. Of 2 CL S/B Mabini E/S
LOCATION: San Jose, Occidental Mindoro
CONTRACTOR: Sui Generis Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------2.48


Specific Gravity ----------------------2.4
Moisture Content ----------------------1.35
Absorption %
----------------------1.16
Unit Weight, kg/cu.m (loose)-------1549
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
32
2.73
1.23
2.3
1564

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02421 cu.m.

0.05728 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-4.28944
Corrected F.A.=,%
29.71056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

29.71056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02421
0.05728
0.01692

3.15
2.40
2.73
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.33
3.49
18.48

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
58.11
156.37
16.92

40.00
58.22
154.70
18.48

KG.
CU. FT.
CU. FT.
Liters
Checked by:

NILO HERNANDEZ
Project Engineer

SALVADOR E. ABAD
Engineer III

Contractor

Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------2.48
Difference from Standard =
2.75 2.48
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

-0.27
0.1

-0.1469722222

0.50%

= -0.27

= -1.35

Total Correction= -4.2894444444


Thus Correction for F.A., cu.m.=

34 +

-4.289444444 =

29.7105555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
58.22 KG
C.A.=
154.70 KG.
WATER=
18.48 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Const. Of 2 CL S/BBarahan NHS
LOCATION: Sta Cruz , Occidental Mindoro
CONTRACTOR: Sui Generis Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------3.28


Specific Gravity ----------------------2.4
Moisture Content ----------------------1.38
Absorption %
----------------------1.19
Unit Weight, kg/cu.m (loose)-------1530
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
35
2.86
1.36
2.67
1546

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02747 cu.m.

0.05402 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-0.28944
Corrected F.A.=,%
33.71056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

33.71056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02747
0.05402
0.01692

3.15
2.40
2.86
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.52
3.48
18.82

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
65.93
154.50
16.92

40.00
66.06
152.47
18.82

KG.
CU. FT.
CU. FT.
Liters
Checked by:

NILO HERNANDEZ
Project Material Engineer

SALVADOR E. ABAD
Engineer III

Contractor

Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------3.28
Difference from Standard =
2.75 3.28
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

0.53
0.1

-0.1469722222

0.50%

= 0.53

= 2.65

Total Correction= -0.2894444444


Thus Correction for F.A., cu.m.=

34 +

-0.289444444 =

33.7105555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
66.06 KG
C.A.=
152.47 KG.
WATER=
18.82 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Const. Of Bubog B/R
LOCATION: San Jose , Occidental Mindoro
CONTRACTOR: N.B. Garcia Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

COARSE AGGREGATE, Lab. No.


Rounded ( x ) Angular ( )

Finess Modulus ----------------------2.63


Specific Gravity ----------------------2.4
Moisture Content ----------------------1.50
Absorption %
----------------------1.13
Unit Weight, kg/cu.m (loose)-------1540
Brand of Cement ----------------------- PORTLAND
Admixture
----------------------- NONE

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Compressive Strength
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

50
32
2.67
1.39
3.1
1566

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.111111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.0126984127 cu.m.

152.29
9.0(1000)

0.0169211111 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02962 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.081492 cu.m.

0.02482 cu.m.

0.05667 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-3.53944
Corrected F.A.=,%
30.46056
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER
SUMMARY:

30.46056 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02482
0.05667
0.01692

3.15
2.40
2.67
1.00

CEMENT=
F.A.=
C.A.=
WATER=

40.00
1.37
3.35
19.29

Prepared By:

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
59.57
151.31
16.92

40.00
59.80
148.72
19.29

KG.
CU. FT.
CU. FT.
Liters
Checked by:

ANGELITA GARCIA
Project Material Engineer

SALVADOR E. ABAD
Engineer III

Contractor

Chief, MQC Section

Computations :
Correction for Water:
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

= -4.71
152.29 kg

34
=

152.29
C.F. (40)

0.4230277778

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio= 0.423027778
Difference from Standard =
-0.57 0.4230277778 =
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

-0.14697222 =
0.05

-2.939444444

b) Fineness Modulus
Standard------------2.75
Given----------------2.63
Difference from Standard =
2.75 2.63
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

-0.12
0.1

-0.1469722222

0.50%

= -0.12

= -0.6

Total Correction= -3.5394444444


Thus Correction for F.A., cu.m.=

34 +

-3.539444444 =

30.4605555556

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
59.80 KG
C.A.=
148.72 KG.
WATER=
19.29 KG.

kg

Worksheet for Concrete Design Mix


PROJECT: Concreting of Roxas-Mansalay Road
LOCATION: Mansalay, Oriental Mindoro
CONTRACTOR: CAN Construction
PRELIMINARY DATA
FINE AGGREGATE, Lab. No.
Manufactured ( ) Natural ( x )

CPAR-G-1

COARSE AGGREGATE, Lab. No.


Rounded ( ) Angular (x )

Finess Modulus ----------------------2.30


Specific Gravity ----------------------2.84
Moisture Content ----------------------2.35
Absorption %
----------------------1.26
Unit Weight, kg/cu.m (loose)-------1212
Brand of Cement ----------------------- Republic
Admixture
----------------------- NONE

CPAR-G-2

Maximum Size,mm--------------------Abrasion Loss,% ----------------------Specific Gravity, SSD-----------------Moisture Content ----------------------Absorption %


----------------------Unit Weight, kg/cu.m (loose)-------Water Source
-----------------------

Design Specifications Requirements:


Class of Concrete
CLASS "A"
Flexural Strength
550 Psi (3.8 Mpa)
Proportion of Cement to Total aggregates by Weight:
Cement
1
Bag

Cement Factor, kgs/cu.m.---------Slump,mm--------------------------------

50
29
2.69
2.16
1.27
1856

9
50

Total Aggregates

Design Mix per Bag of Cement


Absolute Volume of Concrete, cu.m.= No. of Bags of Cement
Cement Factor

1
9

0.11111 cu.m.

Absolute Volume of Cement, cu.m.= Weight of Cement

40
3.15(1000)

0.01270 cu.m.

147.59
9.0(1000)

0.01640 cu.m.

Absolute Volume of Water + Cement = Abs. Vol. of Cement + Abs. Vol. of Water

0.02910 cu.m.

Absolute Volume of F.A. & C.A., cu.m.=Abs. Vol. of Concrete-Abs. Vol. of H2O & Cement

0.08201 cu.m.

0.02095 cu.m.

0.06106 cu.m.

Sp. Gr. Cement(Unit Wt. of H2O)

Absolute Volume of Water, cu.m.= Adjusted H2O Content


C.F. (Unit Wt. of H2O)

Correction on F.A. % Total Aggregates by Absolute Volume


F.A., %, from Table V =
34
Total Aggregate=
-8.45
Corrected F.A.=,%
25.55
Absolute Volume of F.A., Cu.m.=

Absolute Volume of C.A., Cu.m.=


Materials

CEMENT
F.A.
C.A.
WATER

25.55 x
100

(Abs. Vol. of F.A.& C.A)

Abs. Volume of F.A.& C.A. - Abs. Vol. of F.A.

Absolute Volume Sp. Gravity


cu.m.
0.01270
0.02095
0.06106
0.01640

Prepared By:

3.15
2.84
2.69
1.00

Unit Weight
Kg/cu.m.

Uncorrected Wt. Corrected Weight


Kg.
Kg.

1000
1000
1000
1000

40.00
59.51
164.25
16.40

Checked by:

Materials Engineer
Contractor

Submitted by:

Materials Engineer
Government

Project Engineer
Government

40.00
60.16
165.71
14.29

Computations : Remember if the designed slump, water-cement ratio and fineness modulus is lesser than the standard,
corection is in (-) but if the designed data is greater then the standard , the correction is (+)
Consider the following to obtain the adjusted water content:
a) Slump Correction
Standard------------Given-----------------

75
50

Difference from Standard=


-75 + 50
= -25
Each 25 mm increase or decrease in slump ( 3%) - from table of adjustment
-25 x 0.030=
-0.03
25
Correction=
-0.03 x
Therefore Adj. H2O Content =
Correction for F.A. % sand from Table V=
Consider the Following:
a) Adjusted Water Content
C.F. ( Wt. of Cement)

157

147.59
C.F. (40)

0.41

-0.16 =
0.05

-0.45
0.1

0.41 =

0.50%

= -0.45

= -2.25

Correction FM
Total Correction
Total Correction of FA=

-0.16

-3.2

b) Fineness Modulus
Standard------------2.75
Given----------------2.3
Difference from Standard =
2.75 +
2.3
Each 0.1 increase or decrease in fineness modulus (1/2%)
correction for F. M. =

-4.7

34

Standard Water-Cement Ratio= 0.57


Computed H2O -Cement Ratio=
0.41
Difference from Standard =
-0.57 +
Each 0.05 increase or decrease in water-cement ratio (+1%)
W =
C

= -4.71
147.59 kg

-5.45
-8.45

25.55

CORRECTED WEIGHT = UNCORRECTED WT. ( 1 + MC - ABSORPTION)


100
F.A. =
60.16 KG
C.A.=
165.71 KG.
WATER=
14.29 KG.

-3

Concrete Design Mix

Kg.
40.00
60.16
165.71
14.29

You might also like