You are on page 1of 5

Set

Time 1h 15 min

1.0

What are the factors affecting duty of irrigation?

2.0

What are the steps involve for finding crop water requirement of rice?

3.0What are the components of canal irrigation system (only sketch)

3
2

4.0
Following corrected values were computed from Khoslas curves in a barrage placed on
permeable foundation.
[8]
U/S sheet pile
Intermediate pile
D/S sheet pile

E1
= D1 = 90%,
100%,
E2 = 80%, D2 = 70%,
E3 = 55%, D3 = 45%,

C1 = 85%,
C2 = 65%,
C3 = 0%,

Distance between the U/S and intermediate piles is (roll no /4) m and that between the
intermediate and D/S piles is (roll no /3) m. Assuming that the floor is horizontal
throughout, draw the HGL for the subsoil flow. If the net head is (Roll no / 10) m,
determine the thickness of D/S floor at a distance of 20m and 30m away from the
intermediate sheet pile. Assume G for the floor material equal to 2.2. The symbols has
usual meanings.
5.0

An irrigation canal carrying a discharge of Roll no m 3/s has to be constructed in alluvial


soil. If the mean diameter of the soil is Roll no/100 mm, design a suitable section and bed
slope of such a canal.
5

Set

Time 1h 15 min

1.0

Define cropping Pattern and list out the factor affecting in cropping pattern.

2.0

What are the steps involve for finding crop water requirement of wheat ?

3.0

What are the components of canal irrigation system (only sketch)

4.0
Following corrected values were computed from Khoslas curves in a barrage placed on
permeable foundation.
[8]
U/S sheet pile
Intermediate pile
D/S sheet pile

E1
= D1 = 90%,
100%,
E2 = 80%, D2 = 70%,
E3 = 55%, D3 = 45%,

C1 = 85%,
C2 = 65%,
C3 = 0%,

Distance between the U/S and intermediate piles is (roll no /4) m and that between the
intermediate and D/S piles is (roll no /3) m. Assuming that the floor is horizontal
throughout, draw the HGL for the subsoil flow. If the net head is (Roll no / 10) m,
determine the thickness of D/S floor at a distance of 20m and 30m away from the

intermediate sheet pile. Assume G for the floor material equal to 2.2. The symbols has
usual meanings.
5.0

An irrigation canal carrying a discharge of Roll no m 3/s has to be constructed in alluvial


soil. If the mean diameter of the soil is Roll no/100 mm, design a suitable section and bed
slope of such a canal.
5

Set

Time 1h 15 min

1.0

What are the factors influencing for the selection of irrigation method?

2.0

What are the steps involve for finding crop water requirement of maize?

3.0

What are the components of canal irrigation system (only sketch)

4.0
Following corrected values were computed from Khoslas curves in a barrage placed on
permeable foundation.
[8]
U/S sheet pile
Intermediate pile
D/S sheet pile

E1
= D1 = 90%,
100%,
E2 = 80%, D2 = 70%,
E3 = 55%, D3 = 45%,

C1 = 85%,
C2 = 65%,
C3 = 0%,

Distance between the U/S and intermediate piles is (roll no /4) m and that between the
intermediate and D/S piles is (roll no /3) m. Assuming that the floor is horizontal
throughout, draw the HGL for the subsoil flow. If the net head is (Roll no / 10) m,
determine the thickness of D/S floor at a distance of 20m and 30m away from the
intermediate sheet pile. Assume G for the floor material equal to 2.2. The symbols has
usual meanings.
4.0An irrigation canal carrying a discharge of Roll no m 3/s has to be constructed in alluvial soil. If
the mean diameter of the soil is Roll no/100 mm, design a suitable section and bed slope of
such a canal.
5

Set

Time 1h 15 min

1.0

What are the factors influencing for the selection of irrigation method?

2.0

What are the steps involve for finding crop water requirement of maize?

3.0

What are the components of canal irrigation system (only sketch)

4.0
Following corrected values were computed from Khoslas curves in a barrage placed on
permeable foundation.
[8]

U/S sheet pile


Intermediate pile
D/S sheet pile

E1
= D1 = 90%,
100%,
E2 = 80%, D2 = 70%,
E3 = 55%, D3 = 45%,

C1 = 85%,
C2 = 65%,
C3 = 0%,

Distance between the U/S and intermediate piles is (roll no /4) m and that between the
intermediate and D/S piles is (roll no /3) m. Assuming that the floor is horizontal
throughout, draw the HGL for the subsoil flow. If the net head is (Roll no / 10) m,
determine the thickness of D/S floor at a distance of 20m and 30m away from the
intermediate sheet pile. Assume G for the floor material equal to 2.2. The symbols has
usual meanings.
5.0An irrigation canal carrying a discharge of Roll no m 3/s has to be constructed in alluvial soil. If
the mean diameter of the soil is Roll no/100 mm, design a suitable section and bed slope of
such a canal.
5

3.0

Derive the relation between R, q, f by lacey equation.

3.0

Design a canal to carry a discharge of 20 cumecs, using Laceys theory.

Take silt factor = 1.5 and side slope is 0.5:1.


An irrigation canal carrying a discharge of Roll no m 3/s has to be constructed in alluvial soil. If the
mean diameter of the soil is Roll no/100 mm, design a suitable section and bed slope of such a
canal. 4

1. Following corrected values were computed from Khoslas curves in a barrage placed on
permeable foundation.
[8]
U/S sheet pile
Intermediate pile
D/S sheet pile

E1
= D1 = 90%,
100%,
E2 = 80%, D2 = 70%,
E3 = 55%, D3 = 45%,

C1 = 85%,
C2 = 65%,
C3 = 0%,

Distance between the U/S and intermediate piles is (roll no /4) m and that between the
intermediate and D/S piles is (roll no /3) m. Assuming that the floor is horizontal
throughout, draw the HGL for the subsoil flow. If the net head is (Roll no / 10) m,
determine the thickness of D/S floor at a distance of 20m and 30m away from the
intermediate sheet pile. Assume G for the floor material equal to 2.2. The symbols has
usual meanings.

The consumptive use for a given crop is 90mm. Determine the field irrigation requirement if the
effective rainfall and the irrigation efficiency in the area are 15mm and 60% respectively.

An irrigation canal carrying a discharge of 40 m3/s has to be constructed in alluvial soil. If the
mean diameter of the soil is 0.5 mm, design a suitable section and bed slope of such a canal.

The banks of an irrigation channel conveying a flow of 10.0 m 3/s are well protected with a
masonry structure with side slope as 0.5:1 (H:V). The canal has to pass through the medium
having mean particle as 5 cm. If the bed slope of the canal is 1:2000, find the stable bed width.
Draw the sketch of the designed section. Assume that roughness is same along the whole
perimeter of the section.

Design a regime canal in alluvial soil to convey a discharge of 68 m 3/sec. The average size of
particles along the canal alignment is 0.05mm.

The banks of an irrigation channel conveying a flow of 12.0 m 3/s are well protected with a
masonry structure with side slope as 0.5:1 (H:V). The canal has to pass through the medium
having mean particles as 4 cm. If the bed slope of the canal is 1:2000, find the stable bed width.
Draw the sketch of the designed section. Assume that the roughness is same along the whole
perimeter of the section.

You might also like