Professional Documents
Culture Documents
Carry out the assigned project making initial estimates, then using the Lewis-Matheson technique and finally
comparing the results obtained when simulated on HYSIS. [25%].
Project #
1
Group
Objective
Design a distillation column to recover 95% of
acrylonitrile in the distillate. The feed to the column
contains 95.2 mol % acrylonitrile, 0.1 mol % hydrogen
cyanide and 4.7 mol % water at a temperature and
pressure of 58 C and 1 bar, respectively.
Design a distillation column to recover 99% of methane
in the distillate and 98% ethylene in the bottoms. The
feed to the column contains 7 mol % methane, 56 mol
% ethylene and 37 mol % ethane at a temperature and
pressure of -160 C and 37 bar, respectively.
Design a distillation column to recover 98% of vinyl
acetate in the distillate. The feed to the column contains
20 mol% acetic acid, 20 mol% water, and 60 mol%
vinyl acetate at a temperature and pressure of 95 C and
2.4 bar, respectively.
Design a distillation column to recover 98% of water.
The feed to the column contains 4.5mol% ethanol,
86.3mol% methanol and 9.2%mol water at a
temperature and pressure of 60 C and 1 bar,
respectively.
Design a distillation column to recover 99% of
methanol in the distillate.
Feed: 6 mol % methanol, 30 mol % water and 64 mol%
acetic acid T: 100 C and P: 3 bar.