You are on page 1of 18

CORE-CHENNAI-ENGG/CORE

TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

Closing Date/Time: 24/10/2016 15:00

Dy. Chief Engineer Railway Electrifcation Chennai acting for and on behalf of The President of India invites ETenders against Tender No RE-MS-CIVIL-2016-02 Closing Date/Time 24/10/2016 15:00 Hrs. Bidders will be
able to submit their original/revised bids upto closing date and time only. Manual offers are not allowed against
this tender, and any such manual offer received shall be ignored.
Contractors are allowed to make payments against this tender towards tender document cost and earnest money
only through only payment modes available ON IREPS portal LIKE net banking, debit card, credit card etc.
Manual payments through Demand draft, Banker cheque, Deposit receipts, FDR etc. are not allowed.
1. NIT HEADER
Proposed construction of AC Loco Trip Shed with Retaining wall at Mangalore Junction in

Name of Work

Palghat Division of Southern Railway.

Tender Type

Open

Bidding System

Single Packet System

Tender Closing Date Time

24/10/2016 15:00

Date Time Of Uploading Tender

20/09/2016 13:39

Pre-Bid Required

No

Pre-Bid Query Date Time

Not Applicable

Advertised Value

40094580.10

Tendering Section

DRAWING1

Bidding Style

[ Decision at Schedule level ]

Bidding Unit

Earnest Money (Rs.)

350480.00

Validity of Offer ( Days)

90

Tender Doc. Cost (Rs.)

10960.00

Period of Completion

12 Months

Bidding Start Date

10/10/2016

2. SCHEDULE
S.No.

Item

Item Qty

Qty Unit Unit Rate

Basic Value

Escl.(%)

Amount

Bidding Unit

Code
Schedule A-1 (USSOR Items - General)

19883522.74

Please see Item Breakup for details.


1

10985371.68

81.00

Above/
Below/Par

19883522.74

Item Description:- List of items which are covered by S.Rly USSOR 2011 applicable to PGT Division with all
correction slips issued upto date

S.No.

Item

Item Qty

Qty Unit

Unit Rate

Basic Value

Escl.(%)

Amount

Bidding Unit

Code
Schedule A -2 (USSOR Items - Supply of Earth)

4044988.00

Please see Item Breakup for details.


02

2234800.00

81.00

Above/
Below/Par

4044988.00

Item Description:- List of items which are covered by S.Rly USSOR 2011 applicable to PGT Division with all
correction slips issued upto date

S.No.

Item

Item Qty

Qty Unit

Unit Rate

Basic Value

Escl.(%)

Amount

Bidding Unit

Code
Schedule B -USSOR Items (Cement)
Please see Item Breakup for details.
03

5077842.11
3430974.40

48.00

Above/
Below/Par

5077842.11

Item Description:- List of items which are covered by S.Rly USSOR 2011 applicable to PGT Division with all
correction slips upto date

Page 1 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02
S.No.

Item

Item Qty

Closing Date/Time: 24/10/2016 15:00

Qty Unit

Unit Rate

Basic Value

Escl.(%)

Amount

Bidding Unit

Code
Schedule C -USSOR Items (Steel)

9699927.25

Please see Item Breakup for details.


04

6689605.00

45.00

Above/
Below/Par

9699927.25

Item Description:- List of items which are covered by S.Rly USSOR 2011 applicable to PGT Division with all
correction slips upto date

S.No.

Item Code Item Qty

Qty Unit

Unit Rate

Basic Value

Escl.(%)

Amount

Bidding
Unit

Schedule D -List of items which are not covered by S.Rly USSOR 2011 applicable to PGT

1388300.00

Division with all correction slips upto date


NS-1

60

Metre

150

9000.00

At Par

9000.00

Rs.

Item Description:- Dismantling the existing BG track consisting of 90R / 52 / 60 Kg or any other section of rails
01

as exists at site over PSC or any other type of sleepers including opening the track up to bottom of sleeper,
clearing and levelling the site for laying new track, leading and stacking the released materials duly crossing the
track wherever necessary at locations along the cess and accessible by road without causing hindrance/
infringement to train movement with all lead and lift with contractor-s tools and plants and labour incl. crossing of
tracks in yard wherever necessary as directed by the Engineer -in -charge.
NS-2

400

Metre

238

95200.00

At Par

95200.00

Rs.

Item Description:- Linking and laying BG track on bank / cutting with 90 R / 52/ 60 Kg or any other section of rails
02

over sleeper of PSC with M+4 sleeper density to gauge, cross level and alignment and three packing with Rly-s
Stone ballast to required standard and sectioning the ballast as required. Leading P.way materials from stacks
with in a radius of 1 Km at Station yard and also crossing the tracks wherever required and as directed by the
Engineer - in - charge with all lead and lift. [All labour and tools and consumables shall be at contractor-s cost.]
NS-3

Set

63000

189000.00

At Par

189000.00

Rs.

Item Description:- Assembling and insertion UNDER LINE BLOCK [if required] of 90R/ 52 kg 1 in 8 1/2 points
and crossings as per RDSO drawings on the sleepers in position duly leading materials to site of work from
stacks with in a radius of 1 km of station yard cleaning and levelling the site, spreading in alignment placing of rails
in position to correct gauge and alignment, fixing of distance blocks, check blocks, insulated gauge, tie plates
03

greasing of pandrol clips etc., Contractor may have to use his own crane, fuel, lorry, crew and labour duly keeping
PSC sleepers to correct spacing, squaring, correct throw of switches both left/ right hand and as directed by
Engineer - in - charge and linking the same with existing track including initial manual packing duly rectifying the
alignment of longitudinal and cross level to enable to train movement at a restricted speed of 20 Kmph duly
engaging a Blacksmith during inserting of Pt and X-ing and ensuring proper setting of Pt and Xing to the
satisfaction of the S and T department officials at site and as directed [ All labour, tools and consumables lead and
lift by the contractor]
NS-4

04

Set

6300

18900.00

At Par

18900.00

Rs.

Item Description:- Attending two rounds of manual packing of BG points and crossings in stages with Railways
stone ballast to the required cushion including lifting and final packing and sectioning the ballast to the standard
profile and attending the alignment, gauge and cross level etc., and as directed by the Engineer - in-charge. [All
labour and tools to be supplied and consumables will be by the contractor]
NS-5

Set

20000

20000.00

At Par

20000.00

Rs.

Item Description:- Laying new BG trap switch with stock rails, tongue rail, PSC/ sleepers with all fittings including
fixing point box with pullrods insulated and packing the same to the required standard including connecting with the
existing track on either end including fixing of insulated gauge tie plate duly engaging a Blacksmith during inserting
of Pt and X-ing and ensuring proper setting of Pt and Xing to the satisfaction of the S and T department personnel
at site and as directed by the Engineer-in-Charge with all lead and lift etc., complete. [ All labour tools and plants
05

are to be supplied by contractor. P.way materials will be issued free by the Railways.]
Page 2 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

NS-6
06

Closing Date/Time: 24/10/2016 15:00

Set

2600

10400.00

At Par

10400.00

Rs.

Item Description:- Construction of fouling point to the required shape and size in brick masonry in CM1:4 mix
including. plastering in CM 1:5 mix and white washing the same with 2 coats over initial coat including. painting
required letters and nos. with approved quality of paint and as directed by the Engineer-in-charge with all lead and
lift [All labour and materials incl. cement by the contractor]
NS-7

07

600

cum

1447

868200.00

At Par

868200.00

Rs.

Item Description:- Supply of 50 mm hard stone [machine crushed] ballast incl. Collection from quarries outside
Railway limits and stacking the same with in Rly. limits at nominated site for measurement as directed by the
Engineer - in - charge with all lead and lift. [All lead and lift labour tools and plants by the contractors own cost]
NS-8

08

600

cum

172

103200.00

At Par

103200.00

Rs.

Item Description:- Leading and dumping the railways ballast as specified below from the stacks available over
the levelled formation to proper level and gradient for laying of tracks, Points and crossings including crossing of
tracks with all lead and lift etc., complete and as directed by the Engineer - in -charge. [All labour and tools and
plants by the contractor.]
NS-9

Set

23000

69000.00

At Par

69000.00

Rs.

Item Description:- Fixing of Railways heavy duty buffer stop as per drawing No. DRG. BE 49/ GL with
09

contractors men, materials, tools, plant etc., without causing any damage including with all lead and lift, crossing of
track if any and leading of buffer at specified locations in the yard and painting two coats with enamel paint for iron
work and red enamal paint with two coats for woodeen sleeper as directed by the Engineer-in-charge. [All labour
and tools and plants by the contractor. Heavy Duty Buffer stop with all fittings. gusset plate and wooden sleeper
will be supplied by Railways]
NS-10

10

60

Per Track
Metre

90

5400.00

At Par

5400.00

Rs.

Item Description:- Laying 52/ 60 kg/ 90R rails to correct line and level fixed with MS bearing plates [ERC Type] at
600 mm centres and anchoring the same with 20mm dia rag bolt/ anchor bolt 300 mm long to RCC block/ CC
apron as ahown in the plan and also as directed by the Engineer-in-charge. [All labour and materials by contractor
except rails and its fittings, bolts and bearing plates]

3. ITEM BREAKUP
Schedule Schedule A-1 (USSOR Items - General)
Item- 1
S No.

List of items which are covered by S.Rly USSOR 2011 applicable to PGT Division with all correction slips issued
upto date
Item

Description of Item

Unit

Qty

Rate

Amount

No
Earth work in excavation as per approved drawings and
dumping at embankment site or spoil heap, within railway
land, including 50m lead and 1.5m lift, the lead to be
measured from the centre of gravity of excavation to centre
of gravity of spoil heap: the lift to be measured from natural
ground level and paid for in layers of 1.5m each, including
incidental work, as per specifications-in

Page 3 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

Closing Date/Time: 24/10/2016 15:00

011011 All kinds of soils

cum

620.00

103.32

64058.40

011070 Extra for every additional lift of 1.5m or part thereof, after cum

10.00

9.97

99.70

620.00

10.30

6386.00

20.00

23.00

460.00

20.00 2314.74

46294.80

the initial 1.5m, for earth work in all soils


3

012010 Extra over item 011010 for excavation in foundations for cum
buildings and bridges to cover dressing to neat dimension
and plumbing sides etc. Note : Dressing under this item is
payable for the total quantity of excavation in foundation and
not partly

012040 Filling, watering and ramming earth in 15 cm layers in floors cum


and foundations with surplus earth from foundations
including 50m lead and 1.5m lift

012050 Supplying and filling sand in plinth and under floors including cum
watering, ramming, consolidating and dressing complete
Earthwork in cutting (Classified) in formation, trolley
refuges, side drains, level crossing approaches, platforms,
catch water drains, diversion of nallah & finishing to required
dimension and slopes to obtain a neat appearance to
standard profile inclusive of all labour, machine and
materials and removing & leading all cut spoils either to
make spoil dumps beyond 10m. from cutting edge or for
filling in embankment with all leads within the section limit,
lifts, ascent, descent, loading, unloading, all taxes/royalty,
clearance of site and all incidental charges, bailing &
pumping out water if required, etc., complete as per
directions of the Engineer-in-Charge. The work is to be
executed as per Latest / updated edition of "Guidelines for
Earthwork in Railway Projects" issued by RDSO, Lucknow.
Cut trees shall be property of Railways and to be deposited
in the railway godown unless specified otherwise in the
Special conditions of contract

013111 In all conditions and classifications of soil except rock

cum

021140 Leading miscellaneous materials such as iron work, rails, MT

400.00

139.73

55892.00

100.00

116.57

11657.00

200.00

221.29

44258.00

18000.00

9.93

178740.00

fitting & fastenings, pipes, wooden logs, stones over


pitching stone size, RCC/PCC beams / slabs etc. and all
similar articles (each individual article or bundle being not
more than 3.5 metres long in the longest direction) including
picking up unloading and stacking, lead upto 50m.
8

021150 Leading miscellaneous materials such as iron work, rails, MT


fittings & fastenings, pipes, wooden logs, stones over
pitching stone size, RCC/PCC beams / slabs etc and all
similar articles (each individual article or bundle being not
more than 3.5 metres long in the longest direction) including
all loading, unloading and stacking, lead over 500m and upto
10 km. Note : Lead under this item is payable when the
same exceeds 500m.

021151 Additional lead for every subsequent km or part thereof, MT/Km


over 10 km and upto 100 km over item no. 021150.

Page 4 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02
10

Closing Date/Time: 24/10/2016 15:00

021160 Leading miscellaneous materials such as iron work, rail, MT

100.00

118.22

11822.00

100.00

236.52

23652.00

8500.00

11.66

99110.00

24.00

857.91

20589.84

50.00 3021.12

151056.00

307.00 2888.71

886833.97

50.00 2628.37

131418.50

15.00 3204.94

48074.10

pipes, wooden logs, stones over pitching stone size,


RCC/PCC beams / slabs etc and all similar articles (each
individual article or bundle being more than 3.5 metres long
in the longest direction) including picking up and stacking,
lead upto 50m.
11

021170 Leading miscellaneous materials such as iron work, rails, MT


pipes, wooden logs, stones over pitching stone size,
RCC/PCC beams / slabs etc. and all similar articles (each
individual article or bundle being more than 3.5 metres long
in the longest direction) by truck, trailor, etc including all
loading, unloading and stacking, lead over 500m and upto
10 km. Note : Lead under this item is payable when the
same exceeds 500m.

12

021171 Additional lead for every subsequent km or part thereof, MT/Km


over 10 km and upto 100 km over item no. 021170

13

021510 Hiring of JCB Machine (in good working condition) for Hour
leveling and dressing ground / dismantling structures
including disposal of debris through dumpers etc. with
contractor's labour, JCB machine, machine operator, fuel,
etc. The contractor shall arrange road permit for vehicle for
all the States of operation, as per instructions of engineer incharge and vehicle shall not be more than three years old.
Payment shall be made for actual working hours at site.
Providing and laying in position cement concrete of
specified proportion excluding cost of cement, centering
and shuttering - All works upto Plinth level :

14

031011 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm cum


nominal size)

15

031012 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm cum


nominal size)

16

031013 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40mm cum


nominal size)
Providing and laying cement concrete, up to plinth in
retaining walls, walls (any thickness) including attached
plasters, columns, pillars, posts, struts, buttresses, string
or lacing courses, parapets, coping, bed blocks, anchor
blocks, plain window sills, fillets etc, excluding the cost of
cement and of shuttering, centering.

17

031023 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm cum


nominal size)
Providing and laying cement concrete 1:2:4 in damp-proof
course (1 cement : 2 sand : 4 graded stone aggregate
12.5mm nominal size - excluding the cost of cement and
including providing, fixing and removal of forms.

18

032051 25mm thick

Sqm

Page 5 of 18

30.00

135.38

4061.40

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

Closing Date/Time: 24/10/2016 15:00

Providing and laying in position M 20 Grade concrete for


reinforced concrete structural elements but excluding cost
of centering, shuttering, reinforcement and Admixtures in
recommended proportion (as per IS:9103) to accelerate,
retard setting of concrete, improve workability without
impairing strength and durability as per direction of Engineer
in charge
19

041011 All work upto plinth level, including raft foundation of cum

1020.00 3426.21 3494734.20

washable aprons, HS tank, pile cap, footings of FOB, and


Platform shelter etc.
20

041012 All work in buildings above plinth level upto floor two level.

cum

240.00 3690.00

885600.00

Centering and shuttering including strutting, propping etc.


and removal of form for :
21

042011 Foundations, footings, bases of columns, raft foundation of Sqm

300.00

144.80

43440.00

plasters, Sqm

1600.00

247.20

395520.00

042013 Suspended floors, roofs, landings, balconies, FOB slabs, Sqm

100.00

244.27

24427.00

girders, Sqm

220.00

206.61

45454.20

Sqm

320.00

326.50

104480.00

80.00

171.30

13704.00

12.00

618.61

7423.32

cum

1.00 4742.25

4742.25

cum

80.00 4815.89

385271.20

washable aprons, Pile caps, Footings of FOB etc.


22

042012 Walls

(any

thickness)

including

attached

buttresses, plinth and string courses etc.


23

walkway slabs and access platform


24

042014 Lintels,

beams,

plinth

beams,

bed

blocks,

bressumers and cantilevers


25

042015 Columns, pillars, , posts and struts


Centering and shuttering including strutting, propping etc.
and removal of form for special shapes

26

042025 Edges of slabs and beams in floors and walls under 20 cm Metre
wide

27

042029 Weather shade, Chajjas, corbels etc. including edges

Sqm

Providing, hoisting and fixing in position upto floor two level


M20 Grade precast RCC work including setting in cement
mortar 1:3 (1 cement : 3 coarse sand) and finishing smooth
with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand)
on exposed surfaces complete including cost of centering,
shuttering, finishing, Admixtures in recommended proportion
(as per IS:9103) to accelerate, retard setting of concrete,
improve workability without impairing strength and durability,
excluding cost of cement and steel reinforcement, as per
approved plan & direction of Engineer incharge.
28

043014 In Shelves, cantilevers, chajjas, sunshades etc.


Brick work with non-modular (FPS) bricks of class
designation 7.5 in foundation and plinth in :

29

051018 Cement mortar 1:6 (1 cement : 6 coarse sand)

30

051040 Extra over item 051010 & 051020 for brick work in cum

70.00

171.68

12017.60

superstructure beyond plinth level upto floor two level :


Half brick masonry with bricks of class designation 7.5 in
foundations and plinth in :
31

051182 Cement mortar 1:4 (1 Cement : 4 coarse sand)

Sqm

2.00

562.23

1124.46

32

051190 Extra for half Brick masonry in superstructure above plinth Sqm

2.00

47.55

95.10

level upto floor two level


Page 6 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

Closing Date/Time: 24/10/2016 15:00

Add or deduct from rates of brickwork when the bricks


specified or permitted to be used by Engineer are of Class
designation other than 7.5
33

057103 Deduct for Class designation 5

cum

80.20 -126.19

-10120.44

cum

101.00 2810.01

283811.01

cudm

900.00

148.81

133929.00

Sqm

15.00 3243.17

48647.55

Sqm

8.00 2947.18

23577.44

Sqm

8.00

Random rubble masonry with hard stone in foundation and


plinth including levelling up with concrete as per
specifications, upto plinth level with :
34

061013 Cement mortar 1:6 (1cement: 6coarse sand)


Providing wood work in frames of doors, windows,
clerestory windows and other frames and trusses, wrought,
framed and fixed in position :

35

071011 Second class teak wood


Providing and fixing panelled/glazed or panelled and glazed
shutters for doors, windows and clerestory windows
including ISI marked black enamelled M.S. butt hinges with
necessary screws excluding, panelling/glazing which will be
paid for separately

36

072012 Second class teak wood, 30mm thick


Providing and fixing panelling/glazing or panelling and
glazing in panelled/ glazed or panelled and glazed shutters
for doors, windows and clerestory windows (Area of
opening for panel inserts excluding portion inside grooves
or rebates to be measured). Panelling/glazing for panelled/
glazed or panelled and glazed shutters 25mm to 40mm
thick

37

072021 Second class teak wood.15mm thick


Providing and fixing paneling and/or glazing in panelled
and/or glazed shutters for doors, windows and clerestory
windows (Area of opening for panel inserts excluding
portion inside grooves or rebates to be measured).
Panelling/glazing for panelled/ glazed or panelled and glazed
shutters 25mm to 40mm thick

38

072037 Glazing with float glass panes 4mm thick (10kg/sqm)

455.73

3645.84

16.80 1595.34

26801.71

Providing and fixing to IS: 2202 Part-1 marked flush door


shutter decorative type, core of block board construction
with frame of 1st class hard wood and well matched teak
3ply veneering with vertical grains or cross bands and face
veneers on both faces of shutters
39

072142 30mm thick including ISI marked stainless steel butt hinges Sqm
with necessary screws

40

072170 Extra for providing lipping with 2nd class teak wood battens Sqm

16.80

82.39

1384.15

270.00

75.97

20511.90

25mm minimum depth on all edges of shutters (over all area


of door shutters to be measured)
Providing and fixing M.S. grills of required pattern in frames
of windows etc. with M.S. flats, square or round bars etc. all
complete
41

074232 Fixed to opening/ wooden frames with rawl plugs screws Kg


etc.

Page 7 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02
42

Closing Date/Time: 24/10/2016 15:00

074280 Providing 40x5mm flat iron hold fast 40cm long including Each

96.00

69.99

6719.04

Each

8.00

167.77

1342.16

fixing to frame with 10mm diameter bolts, nuts and wooden


plugs

and

embeddings

in

cement

concrete

block

30x10x15cm 1:3:6 mix (1cement: 3coarse sand: 6graded


stone aggregate 20mm nominal size)
Providing and fixing M.S. sliding door bolts generally
conforming to IS: 281, bright satin finish or black stone
enamelled with nuts and screws etc. complete of size
43

075052 250x16 mm
Providing and fixing M.S. tower bolts generally conforming
to IS:204 (Part I) with necessary screws etc. complete of
size.

44

075061 250x10 mm

Each

16.00

71.04

1136.64

45

075064 100x10 mm

Each

72.00

34.28

2468.16

Providing and fixing M.S. door handles with necessary


screws etc. complete.
46

075072 100mm

Each

8.00

12.71

101.68

47

075073 75mm

Each

36.00

10.05

361.80

Providing and fixing MS hooks and eyes


48

075085 100mm

Each

36.00

5.69

204.84

49

077330 Providing and fixing chromium plated brass 100mm mortice Each

8.00

708.71

5669.68

Each

6.00

80.93

485.58

Each

4.00

66.95

267.80

Each

4.00

56.90

227.60

Each

8.00

35.19

281.52

latch and lock with 6 levers and a pair of lever handles with
necessary screws etc. complete (best make of approved
quality)
Providing and fixing ISI marked aluminium butt hinges ISI
marked anodised (anodic coating not less than grade AC 10
as per IS: 1868) transparent or dyed to required colour or
shade with necessary screws etc. complete
50

078016 75x63x4mm
Providing and fixing aluminium tower bolts ISI marked
anodised (anodic coating not less than grade AC 10 as per
IS: 1868) transparent or dyed to required colour or shade
with necessary screws etc. complete

51

078035 100x10mm
Providing and fixing aluminium handles ISI marked anodised
(anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade with
necessary screws etc. complete

52

078062 100mm
Providing and fixing aluminium hanging floor door stopper
ISI marked anodised (anodic coating not less than grade
AC 10 as per IS: 1868) transparent or dyed to required
colour and shade with necessary screws etc. complete

53

078071 Single rubber stopper

Page 8 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02
54

Closing Date/Time: 24/10/2016 15:00

078130 Providing and fixing factory made P.V.C. door frame of size Metre

11.40

400.21

4562.39

3.20

838.33

2682.66

Kg

9900.00

54.25

537075.00

50x47mm with a wall thickness of 5mm, made out of


extruded 5mm rigid PVC foam sheet mitered at corners and
joined with 2 Nos. of 150mm long brackets of 15x15mm
M.S. square tube, the vertical door profiles to be reinforced
with 19x19mm M.S. square tube of 19 gauge, EPDM rubber
gasket weather seal to be provided through out the frame.
The door frame to be fixed to the wall using M.S. screws of
65/100mm

size

complete

as

per

manufacturers

specification and direction of Engineer-in-Charge


55

078180 Providing and fixing to existing door frame 24mm thick Sqm
factory made PVC door shutters made of styles and rails of
a PVC hollow section of size 59mm x 24mm with a wall
thickness 2mm0.2mm. The styles and rails mitered cut
and joined at corners by means of M.S. galvanized /plastic
brackets of size 75mm x 220mm having wall thickness
1.0mm/solid and fix with stainless steel screws. The styles
of shutter reinforced by inserting galvanized M.S. tube of
size 19mm x 19mm with a wall thickness1mm0.1mm. The
lock rail made out of 'H' section, PVC hollow section of size
100mm x 24mm with a wall thickness 2mm0.2mm, fixed to
shutter styles by means of plastic/galvanized M.S. 'U'
cleats. The shutter frame filled with a PVC multi-chambered
panel of size 20 x 200mm with a wall thickness
1mm0.1mm. The panels filled vertically and tie bar at two
places by inserting horizontally 0.6mm galvanized M.S. rod
and fastened with nuts and washers
Structural steel work in single section including cutting,
bending, straightening, drilling, rivetting, bolting, hoisting,
fixing in position, including applying a priming coat of
approved steel primer, complete - upto 6m height above GL

56

081011 In RSJ, tees, angles and channels


Structural steel work welded in built up sections, trusses
and framed work, girders, stagings, racks, etc including
cutting, bending, straightening, hoisting, fixing in position,
including applying a priming coat of approved steel primer,
complete - upto 6m height above GL

57

081031 In RSJ, tees, angles and channels

Kg

17250.00

67.59 1165927.50

58

081140 Supplying and fixing lewis/ holding down bolts of approved Kg

1500.00

58.36

87540.00

400.00

123.51

49404.00

design with nuts and washers complete


Cement concrete flooring 1:2:4 (1cement: 2coarse sand:
4graded stone aggregate) finished with a floating coat of
neat cement including cement slurry, but excluding the cost
of nosing of steps etc. complete
59

092011 25mm thick with 12.5mm nominal size stone aggregate

Page 9 of 18

Sqm

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

Closing Date/Time: 24/10/2016 15:00

Providing and fixing Ist quality ceramic tiles conforming to


Group B-III (Ceramic Wall Tiles) of IS:15622 of
manufacturers approved by railway in all colours, shades,
and design as approved by the Engineer-in-Charge in
skirting, risers of steps and dado over 12mm thick bed of
cement mortar 1:3 (1cement: 3coarse sand) including
pointing in white cement mixed with pigment of matching
shade complete
60

095012 200x300 mm

Sqm

300.00

471.84

141552.00

095021 Of Group B-II Clause 5.1 (for abrasion resistance) of Sqm

20.00

512.51

10250.20

100.00

772.01

77201.00

1100.00

581.93

640123.00

18.00 1958.26

35248.68

Providing and fixing ceramic tiles conforming to IS:15622 of


manufacturers approved by railway in all colours, shades,
design and abrasion resistance class as approved by the
Engineer-in-Charge in floors and landings over 20mm thick
bed of cement mortar 1:4 (1cement: 3coarse sand)
including pointing in white cement mixed with pigment of
matching shade complete
61

IS:15622 (Ceramic Floor Tiles) of size 300x300mm


62

095026 Of Group B-I-a of IS : 15622 (Vitrified tiles) of size above Sqm


400x400mm upto 600x600 mm

63

101080 Supply & installation of precoated galvanized iron profile Sqm


sheets (size, shape and pitch of corrugation as approved
by Engineer-in-charge) 0.50mm +/- 5% total coated
thickness (TCT) thick Zinc coating 120gsm as per IS:277 in
240mpa steel grade, 5-7microns epoxy primer on both side
of the sheet and polyester top coat 15-18 microns. Sheet
should have protective guard film of 25 microns minimum to
avoid scratches while transportation and should be supplied
in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling / self
tapping screws of size (5.5 x 55mm) with EPDM seal or
with polymer coated J or L hooks, bolts and nuts 8mm
diameter with bitumen and G.I. limpet washers or with G.I.
limpet washers filled with white lead complete upto any pitch
in horizontal/vertical or curved surfaces excluding the cost
of purlins, rafters and trusses and including cutting to size
and shape wherever required
Providing & fixing machine made UV stabilised fiberglass
reinforced plastic sheet roofing upto any pitch including
fixing with polymer coated 'J' or 'L' hooks, bolts and nuts
8mm dia. G.I. plain/bitumen washers complete but excluding
the cost of purlins, rafters, trusses etc. The sheets shall be
manufactured out of 2400 TEX panel rovigs incorporating
minimum 0.3% Ultra-violet stabilizer in resin system under
approximately 2400 psi and hot cured. They shall be of
uniform pigmentation and thickness without air pockets and
shall conform to IS 12866. The sheets shall be opaque or
translucent, clear or pigmented, textured or smooth as
specified

64

103091 2mm thick corrugated / 2mm thick Profile Sheets

Page 10 of 18

Sqm

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02
65

Closing Date/Time: 24/10/2016 15:00

104050 Providing and laying pressed clay tiles (as per approved Sqm

100.00

395.07

39507.00

100.00

465.54

46554.00

Metre

12.00

184.41

2212.92

pattern 20mm nominal thickness and of approved size) on


roofs jointed with cement mortar 1:4 (1cement: 4coarse
sand) mixed with 2% integral water proofing compound laid
over a bed of 20mm thick cement mortar 1:4 (1cement:
4coarse sand) and finished neat complete
66

104060 Lime concrete terracing on roofs average thickness 10cm Sqm


laid to fall with 25mm nominal size brick aggregate and 50%
lime mortar 1:2 (1lime putty: 2surkhi) rammed and finished
with gur and belgiri treatment complete including rounding of
junctions with parapet wall complete - upto floor two level
Providing and fixing on wall face unplasticised - Rigid PVC
single socketed rain water pipes conforming to IS: 13592
Type A including jointing with seal ring conforming to IS:
5382 leaving 10mm gap for thermal expansion.

67

108162 110mm dia.


Providing and fixing on wall face unplasticised - PVC
moulded bend and shoe for unplasticised-Rigid PVC rain
water pipes conforming to IS:13592 Type A including jointing
with seal ring conforming to IS:5382 leaving 10mm gap for
thermal expansion

68

108182 Bend 87.5o, 110mm dia bend

Each

4.00

204.99

819.96

69

108184 Shoe (Plain), 110mm dia shoe

Each

4.00

187.72

750.88

70

108200 Providing and fixing to the inlet mouth of rain water pipe cast Each

4.00

77.31

309.24

Sqm

305.00

96.19

29337.95

Sqm

235.00

148.78

34963.30

Sqm

320.00

86.26

27603.20

Sqm

135.00

9.24

1247.40

115042 New work (two or more coats of distemper) over and Sqm

290.00

61.79

17919.10

320.00

42.91

13731.20

60.00

23.15

1389.00

750.00

20.15

15112.50

iron grating 15cm dia and weighing not less than 440 grams
12 mm cement plaster of mix 71

111012 1:6 (1cement: 6fine sand)


20 mm cement plaster of mix

72

111062 1:6 (1cement: 6coarse sand)


Pointing on stone work with cement mortar 1:3 (1cement:
3fine sand)

73

114041 Flush/ Ruled pointing


White washing with lime to give an even shade

74

115011 New work (three or more coats)


Distempering with oil bound washable distemper of
approved brand and manufacture to give an even shade

75

including priming coat with distemper primer


76

115110 Finishing walls with water proofing cement paint of required Sqm
shade two or more coats on new work applied @ 3.84
Kg/10 sqm
Applying Priming Coat :

77

121011 With ready mixed pink or grey primer of approved brand Sqm
and manufacture on woodwork (hard and soft wood)

78

121013 With ready mixed red oxide zinc chromate primer of Sqm
approved brand and manufacture on steel galvanized
iron/steel works

Page 11 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

Closing Date/Time: 24/10/2016 15:00

Painting with synthetic enamel paint of approved brand and


manufacture to give an even shade
79

121051 Two or more coats on new work

Sqm

810.00

49.59

40167.90

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)


pipes, having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings including
fixing the pipe with clamps at 1.00m spacing in This includes
jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the
same including testing of joints complete as per direction of
Engineer-in-Charge. Concealed work including cutting
chases and making good the walls etc.
80

131092 20mm nominal outer dia. Pipes

Metre

5.00

154.19

770.95

81

131093 25mm nominal outer dia. Pipes

Metre

5.00

175.24

876.20

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)


pipes, having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings. This
includes jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling and testing of joints
complete as per direction of Engineer-in-Charge. External
work
82

131105 40mm nominal outer dia. Pipes

Metre

100.00

213.55

21355.00

83

131107 62.50mm nominal outer dia. Pipes

Metre

10.00

689.38

6893.80

Metre

25.00 1246.80

31170.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)


Large diameter pipes, having thermal stability for hot & cold
water supply including all CPVC plain & brass threaded
fittings. This includes jointing of pipes & fittings with one step
CPVC solvent cement, trenching, refilling and testing of
joints complete as per direction of Engineer-in-Charge.
External work (higher dia)
84

131122 100mm nominal outer dia. Pipes


Providing and fixing G.I. pipes complete with G.I. fittings and
clamps, including cutting and making good the walls etc.
Internal work - Exposed on wall

85

131132 20 mm dia. nominal bore

Metre

15.00

177.91

2668.65

86

131133 25 mm dia. nominal bore

Metre

30.00

251.79

7553.70

Metre

50.00

240.13

12006.50

Each

1.00

241.53

241.53

Each

3.00

264.89

794.67

Providing and fixing medium grade G.I. pipes complete with


G.I. fittings including trenching and refilling etc. External
Work
87

131153 25 mm dia. nominal bore


Providing and fixing PP-R Brass Ball Valve fusion welded,
having thermal stability for hot & cold water supply and
testing of joints complete as per direction of engineer in
charge

88

131192 25mm Ball Valve


Providing and fixing brass bib cock of approved quality

89

132011 15 mm nominal bore

Page 12 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

Closing Date/Time: 24/10/2016 15:00

Providing and fixing ball valve (brass) of approved quality


complete high or low pressure with plastic floats complete :
90

132042 20 mm nominal bore

Each

1.00

294.67

294.67

Each

3.00

300.03

900.09

Each

2.00

37.50

75.00

1000.00

7.21

7210.00

2.00 7521.67

15043.34

1.00 3550.36

3550.36

1.00 4992.95

4992.95

Providing and fixing gun metal non-return valve of 25 mm


nominal bore approved quality (screwed end)
91

132051 Horizontal
Providing and fixing PTMT grating of approved quality and
colour

92

134052 Circular type 125 mm nominal dia with 25mm waste hole

93

136150 Providing and placing on terrace/staging (at all heights) Litre


polyethylene water storage tank ISI : 12701 marked with
cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but
without fittings and the base support for tank
Constructing brick masonry manhole in cement mortar 1:4
(1cement: 4coarse sand) R.C.C. top slab with 1:2:4
(1cement: 2coarse sand: 4graded stone aggregate 20mm
nominal size), foundation concrete 1:4:8 mix (1cement:
4coarse sand: 8graded stone aggregate 40mm nominal
size) inside plastering 12mm thick with cement mortar 1:3
(1cement: 3coarse sand) finished with floating coat of neat
cement and making channels in cement concrete 1:2:4
(1cement: 2coarse sand: 4graded stone aggregate 20mm
nominal size) finished with a floating coat of neat cement
complete as per standard design

94

143011 Inside size 90x80cm and 45cm deep including C.I. cover Each
with frame (light duty) 455x610mm internal dimensions total
weight of cover and frame to be not less than 38kg (weight
of cover 23kg and weight of frame 15kg). With F.P.S. bricks
class designation 7.5
Providing and fixing water closet squatting pan (Indian type
W.C. pan) with 100mm sand cast iron P or S trap, 10litre
low level white P.V.C. flushing cistern with manually
controlled device (handle lever) conforming to IS : 7231,
with all fittings and fixtures complete including cutting and
making good the walls and floors wherever required

95

151011 White Vitreous China Orissa pattern W.C. pan of size Each
580x440-mm with integral type foot rests
Providing and fixing white vitreous china flat back or wall
corner type lipped front urinal basin of 430x260x350mm and
340x410x265mm sizes respectively with automatic flushing
cistern , with standard flush pipe and C.P. brass spreaders
with brass unions and G.I. clamps complete, including
painting of fittings and brackets, cutting and making good
the walls and floors wherever required

96

151042 Range of two urinal basins with 10 litre white P.V.C. Each
automatic flushing cistern

Page 13 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

Closing Date/Time: 24/10/2016 15:00

Providing and fixing wash basin with C.I./ M.S. brackets,


15mm C.P. brass pillar taps, 32mm C.P. brass waste of
standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever required
97

151074 white vitreous china flat back wash basin size 550x400mm Each

1.00 1526.94

1526.94

with single 15mm C.P. brass pillar tap


98

152090 Providing and fixing 100mm sand cast iron grating for gully, Each

2.00

18.65

37.30

trap
Supplying, fitting and fixing cowls to vent pipes :
99

153232 Wire cowls for pipes of size 100/150 mm dia.

Each

1.00

100.47

100.47

100

153410 Providing and fixing Towel rail (C.P.)brass15 mm dia x 600 Each

1.00

282.97

282.97

2.00

499.68

999.36

15.00

203.23

3048.45

50.00

324.49

16224.50

10.00

767.52

7675.20

cum

20.00

444.52

8890.40

cum

100.00

530.45

53045.00

mm long having approx. wt.500 gm


101

153640 Providing and fixing 10 cm inlet and 5 cm outlet S.C.I. floor Each
trap of self cleansing design with S.C.I. screwed down or
hinged grating with or without vent arm complete, including
cost of cutting and making good the walls and floors

102

154010 Providing and fixing 110mm dia PVC soil, waste and vent Metre
pipes including jointing and cost of spun yarn and sand etc.
complete
Demolishing plain cement concrete including disposal of
material within 50m lead

103

181022 Mix leaner than 1:2:4 with coarse aggregate larger than cum
20mm

104

181030 Demolishing R.C.C. work including cutting and stacking of cum


steel bars and disposal of unserviceable material within 50m
lead.

(Extra

payment

for

scraping,

cleaning

and

straightening of bars to be made separately)


Demolishing brick work including stacking of serviceable
material and disposal of unserviceable material within 50m
lead
105

182013 In cement mortar


Demolishing stone rubble masonry including stacking of
serviceable material and disposal of unserviceable material
within 50m lead

106

182033 In cement mortar

Total

10985371.68

Schedule Schedule A -2 (USSOR Items - Supply of Earth)


Item- 1
S No.

List of items which are covered by S.Rly USSOR 2011 applicable to PGT Division with all correction slips issued
upto date
Item

Description of Item

Unit

Qty

Rate

Amount

No

Page 14 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02
1

Closing Date/Time: 24/10/2016 15:00

013120 Earthwork in filling in embankment, guide bunds, around cum

8000.00

248.88 1991040.00

buried type abutments, bridge gaps, trolley refuges, rain


bunds if provided, platforms etc. with earth excavated from
outside

railway

boundary

entirely

arranged

by

the

contractor at his own cost as per RDSO's latest guidelines


and specifications and special condition of contract
including all leads, royalty, lifts, ascents, descents, crossing
of nallahs or any other obstructions. The rates shall include
all dressing of bank to final profile, demarcation and setting
out of profile, site clearance, removing of shrubs, roots of
vegetations growth, heavy grass, benching of existing slope
of old bank, all handling/re-handling. taxes, octroi and
royalty etc. as a complete job. Cut trees shall be property of
railways and to be deposited in the railway godown unless
specified otherwise in the Special conditions of contract
2

013130 Extra for

mechanical compaction of earth/blanketing cum

8000.00

30.47

243760.00

material filled in embankment with contractor's rollers of


suitable capacity, type and size to achieve specified density
as per specification, testing as per IS codes incl. cost of
water, T&P consumable material and all labour as a
complete job. The work is to be executed as per Latest
edition of "Guidelines for Earthwork in Railway Projects"
issued by RDSO, Lucknow
Total

2234800.00

Schedule Schedule B -USSOR Items (Cement)


Item- 1
S No.

List of items which are covered by S.Rly USSOR 2011 applicable to PGT Division with all correction slips upto
date
Item

Description of Item

Unit

Qty

Rate

Amount

No
1

252040 Ordinary Portland Cement grade-43

MT

529.66 5290.00 2801901.40

252050 Pozzolana Portland Cement (fly ash)

MT

121.56 5175.00
Total

629073.00
3430974.40

Schedule Schedule C -USSOR Items (Steel)


Item- 1
S No.

List of items which are covered by S.Rly USSOR 2011 applicable to PGT Division with all correction slips upto
date
Item

Description of Item

Unit

Qty

Rate

Amount

No
Supplying Reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and
binding all complete.
1

045016 Thermo-Mechanically Treated bars

Kg

126100.00

53.05 6689605.00
Total

6689605.00

4. ELIGIBILITY CONDITIONS
Standard Financial Criteria
S.No. Description

Confirmation Remarks Documents


Required

Page 15 of 18

Allowed Uploading

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

Closing Date/Time: 24/10/2016 15:00

Total Contract amount received during the last THREE financial years and in
the current financial year: Should be a minimum of 150% of the advertised
1

value. The tenderer has to produce attested copies of certificates from the No

No

employer/client, audited balance sheet duly certified by the Charted

Allowed
(Mandatory)

Accountant etc., with the tender documents.

Standard Technical Criteria


S.No. Description

Confirmation Remarks Documents


Required

Allowed Uploading

Should have completed in the last THREE financial years (i.e. current year
and three previous financial years): They should have satisfactorily completed
1

one similar single work for a minimum value of 35% of advertised tender value No

No

of work in the last THREE financial (i.e. current year and three previous

Allowed
(Mandatory)

financial years) upto the date of opening of tender.


1.1

Defination of Similar Work :- Civil Engineering Works including building works

No

No

Not Allowed

5. COMPLIANCE
S.No. Description

Confirmation Remarks Documents


Required

Allowed Uploading

Following Annexures duly filled in and signed are to be uploaded online only
prior to Closing of Tender. Original copy of all the documents are to be
submitted to the office of the Chief Project Director (Civil Engineering branch),
1

Railway Electification, Periyar E.V.R.Salai, Egmore, Chennai - 600008, within 7 No

No

Not Allowed

days whenever demanded by the Railway, Otherwise, Railway reserves the


rights to Accept or Reject such tender or offer without any reference to Bidder.
Annexures are available in pdf format at 'Documents' Tab of this tender.
1.1
1.2
1.3
1.4
1.5

The Proforma for Bid submission shall be submitted as per Annexure - I

No

No

No

No

Details of Works presently on hand of the Tenderer to be filled in Annexure- III No

No

The details of the works completed by the tenderer during the last three years
to be filled in Annexure-II

The details regarding Employment of Railway Officer(s) with the tenderer to be


filled in Annexure- IV
List of the Arbitration cases of the Tenderer during last Five years to be filled
in Annexure-V.

No

No

No

No

No

No

Allowed
(Mandatory)
Allowed
(Mandatory)
Allowed
(Mandatory)
Allowed
(Mandatory)
Allowed
(Mandatory)

NEFT MANDATE FORM. All Payments to the agency (including the refund of
1.6

the Earnest Money of the unsuccessful bidder preferably) will be remitted


through NEFT. The Tenderer is required to submit Bank details and Account

Allowed
(Mandatory)

No. etc. in Annexure-VI.

General Instructions
S.No. Description

Confirmation Remarks Documents


Required

Page 16 of 18

Allowed Uploading

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

Closing Date/Time: 24/10/2016 15:00

CORRIGENDUM NOTICE ON IREPS: No separate notice will be published in


the news papers for corrigendum, if any, in the tender. The bidders should
1

ensure before submitting their offer that any corrigendum is available for this No

No

Not Allowed

No

No

Not Allowed

which tenderers can submit their offer. No corrigendum will be issued during No

No

Not Allowed

tender in the ireps website. For the purpose of corrigendum in the tender, NIT
period is split as under:
ADVERTISEMENT PERIOD: Time during which all information pertaining to
1.1

tender shall be available but offers can not be submitted. The bidders can view
all information of the tender during this period; but can not submit their offers.
Corrigendum, if required, will be issued during this period.
OFFER SUBMISSION PERIOD: Fifteen days prior to closing of tender, during

1.2

this period.

Undertakings
S.No. Description

1
2

Confirmation Remarks Documents


Required

Allowed Uploading

No

No

Not Allowed

No

No

Not Allowed

No

No

Not Allowed

the ruling terms for deciding the inter-se ranking, and any such condition No

No

Not Allowed

No

No

Not Allowed

No

No

Not Allowed

No

No

Not Allowed

I/ We have visited the works site and I / We am / are aware of the site
conditions.
I/We have read the conditions of tender attached hereto and agree to abide by
said conditions.
I/We offer to do the work for CPD/RE/MS, at the rates quoted in the attached
schedule and hereby bind myself/ourselves to complete the work in all
respects within the period of completion stipulated in the tender document,
from the date of issue of letter of acceptance of the tender. The amount as

stipulated in the tender document is remitted online in IREPS portal as Earnest


Money. Full value of the earnest Money shall stand forfeited without prejudice
to any other right or remedies in case my/our Tender is accepted and if: (a)
I/We do not execute the contract documents as stipulated in performance
guarantee clause of GCC as detailed in general instructions. (b) I/We do not
commence the work within seven days after receipt of orders to that effect.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if
any, quoted by us in the relevant fields of the Financial Bid page will only be

having financial repercussions, if quoted by us anywhere else including


attached documents shall not be considered for deciding inter-se ranking
5

However, Railways shall have the right to incorporate any such condition
quoted by us, in the contract, at their discretion, if contract is placed on us.
I/we have deposited full earnest money and tender document cost as
stipulated for the tender, through online modes as permitted in IREPS
application through multiple banks net banking, debit and credit card and I/we

have uploaded scanned copies of mandatory credentials such as experience,


turn over certificates and other documents as applicable. All documents
related to Partnership deed/Joint venture/ Consortium/ MOU, duly signed by
the notary public, should be uploaded at the time of submission of bid, failing
which offer will be summarily rejected.
I/we agree that until a formal agreement is prepared and executed,

acceptance of this tender shall constitute a binding contract between us


subject to modifications, as may be mutually agreed to between us and
indicated in the letter of acceptance of my/our offer for this work

Page 17 of 18

Run Date Time: 20/09/2016 13:40:30

CORE-CHENNAI-ENGG/CORE
TENDER DOCUMENT
Tender No: RE-MS-CIVIL-2016-02

Closing Date/Time: 24/10/2016 15:00

I/We also hereby agree to abide by the Indian Railways Standard General
Conditions Of Contract, with all correction slips up-to-date and to carry out the
8

work according to the Special Conditions of Contract and Specifications of


materials and works as laid down by Railway in the annexed Special

No

No

Not Allowed

No

No

Not Allowed

Conditions/Specifications, Schedule of Rates with all correction slips up to date


for the present contract
9

I/We also agree to keep this tender open for acceptance for a period of 90
days from the date fixed for closing the same

6. Documents attached with tender


S.No.

Document Name

Document Description

GeneralConditionsofContract2014.pdf

GCC 2014

GCCAMENDMENTUPTO01.09.2016.pdf Amendments to GCC

Annexures_1.pdf

Annexures

CHECKLIST.pdf

Check list

INSTRUCTIONSTOTENDERERS.pdf

Instructions to tenderers

SpecialConditionsofContract.pdf

Special conditions of contract

Signed By: RAJAKUMAR KUPPIAH


Designation : Dy.CERE

Page 18 of 18

Run Date Time: 20/09/2016 13:40:30

You might also like