Professional Documents
Culture Documents
Course Number
Version
113-25U10 ADT
08.0
Task(s)
Taught(*) or
Supported
Task Number
Course Title
Task Title
Individual
Reinforced
Task(s)
113-580-1055 (*)
Task Number
Task Title
113-630-1008
113-587-1004
113-587-4003
113-630-3001
Knowledge
Knowledge Id
Title
113-K-10002
113-K-10005
113-K-10007
113-K-10008
113-K-10010
113-K-10011
113-K-10023
113-K-10032
113-K-10098
113-K-10012
Skill
Skill Id
113-S-10035
Title
Taught
Required
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Taught
Required
Yes
Administrative/
Academic
Hours
Yes
1 hr
35 mins
Conference/Demonstration
Yes
2 hrs
10 mins
Practical Exercise (Hands-On)
Yes
2 hrs
5 mins
Conference/Discussion
________________________________________________________________________
Total Hours:
6 hrs
0 mins
Test Lesson
Number
Hours
Lesson Number
None
Prerequisite
Lesson(s)
Lesson Number
Lesson Title
None
Training
Material
Classification
Security Level: This course/lesson will present information that has a Security Classification of:
U - Unclassified.
Foreign
Disclosure
Restrictions
References
Number
Title
113-00347
None
Date
01 Jun 2005
01 Apr 2002
01 Mar 1991
22 Dec 2000
01 Mar 2005
15 Aug 2005
01 Nov 2002
01 Apr 2001
Additional
Information
Instructor
Requirements
One primary instructor, 25U/CIV/MIL SME, certified in accordance with TRADOC Regulation 350-70 and Fort Gordon
Regulation 350-2. One assistant instructor, 25U/CIV/MIL SME.
Support
Personnel
Requirements
Additional
Support
Personnel
Requirements
None
Student
Ratio
Name
None
Qty
Man
Hours
Equipment
Required
for Instruction
ID - Name
Student
Ratio
1430-01-446-5321 - ANTENNA
1:1
TRANSCEIVER
2320-01-346-9317 - Truck Utility:
0:0
Heavy Variant HMMWV 4x4
10000 GVW W/E: M1097
4920-01-132-6145 - Mission Data
1:1
Loader: AN/GYQ-40
5120-00-010-7913 - Screwdriver,
0:0
Flat Tip
5120-00-052-3873 - Wrench,
0:0
Adjustable
5810-01-497-3703 - DTD FILL
1:1
CABLE
5810-01-517-3587 - Transfer
1:1
Unit, Cryptographic Key:
AN/PYQ-10(C)
5820-01-451-8248 - Radio Set:
1:1
AN/VRC-87F(C)
5820-01-502-4040 - Vehicle
1:1
Radio Set: AN/VSQ-2D(V)1
5825-01-526-4783 - Navigation
1:1
Set: Satellite Signals AN/PSN13(A)
5830-01-C16-2663 - Podium
0:0
Lectern: MP42-T Lectern
5985-00-556-9202 - DUMMY
0:0
LOAD,ELECTRICAL
6130-01-223-0267 - POWER
1:1
SUPPLY
6625-01-094-5646 - Radio Test
1:1
Set: AN/PRM-34
6625-01-C02-1132 - Multimeter
1:1
6730-01-C02-3126 - Projector:
0:0
Proxima M2+
7010-01-587-7479 - Computer
0:0
System: Digital
7021-01-C10-6739 - Computer,
0:0
Micro Lap-Top Portable AC:
Toughbook CF-29 Panasonic
7021-01-D17-1200 - Computer,
0:0
Personal Workstation: Optiplex
790 Sff Dell
7025-01-482-9882 - PC
0:0
Whiteboard
7110-01-573-6557 - Chair,
1:1
Rotary, Black
7125-00-090-0859 0:0
CABINET,STORAGE
(Note: Asterisk before ID indicates a TADSS.)
Instructor
Ratio
Spt
1:1
No
No
0:0
Yes
No
0:0
No
No
0:0
Yes
No
0:0
Yes
No
0:0
No
No
1:2
No
0:0
No
No
0:0
No
No
0:0
No
No
0:0
Yes
No
0:0
No
1:1
No
0:0
No
0:0
0:0
Yes
Yes
2
1
No
No
0:0
Yes
No
0:0
No
0:0
No
0:0
Yes
No
1:1
No
No
0:0
Yes
No
Qty
Exp
No
Materials
Required
Instructor Materials:
1. Instructor lesson plan package
2. Visitors lesson plan package
3. DA Form 5988-E. DA PAM 738-750
5. AN/UYK-128 (FBCB2) Hardware
6. TM 11-5825-283-10
7. TM 11-5825-291-13
8. TM 11-5820-1172-10
9. TM 11-7010-326-10
10. TM 11-7010-326-20
11. TM 11-7010-326-20&P
12. TM 11-5825-283-20&P
13.TB 11-7010-326-10-1
14. TB 11-5820-1172-10
15. SB 11-131-2
16. Quick Reference Guide Simple Key Loader (AN/PYQ-10(C))
17. Industrial Standard Professional Computer 19. SINCGARS
Student Materials:
1. Student handout 25U1B13.
2. Black ball point pen (provided by student)
3. Black led pencil (provided by student)
Classroom,
Training Area,
and Range
Requirements
Ammunition
Requirements
ID - Name
Quantity
17120
General Instruction Building
Student
Ratio
1:32
DODIC - Name
Exp
None
Student
Ratio
Setup
Mins
10
Instruct
Ratio
Cleanup
Mins
10
Spt
Qty
Instructional
Guidance
NOTE: Before presenting this lesson, instructors must thoroughly prepare by studying this
lesson and identified reference material.
NOTE: SAFETY: Accidents are an unacceptable impediment to Army missions, readiness, morale and resources.
Decision makers at every level will employ risk management approaches to effectively preclude unacceptable risk to the
safety of personnel and property affiliated with this course. Risk assessments have been conducted for all the lessons
in this POI IAW FM 5-19.
The residual risk is "Low."
1. The instructor must ensure training facilities, training devices; equipment and all other required resources are
available and operational prior to scheduled training.
2. Instructors/trainers serve as role models. They are directly in contact with the students and represent the command
in the presentation of the instruction. Instructors must be technically competent and professional in demeanor. Each
instructor must:
(a) Ensure classroom is available and properly setup.
(b) Stress safety at all times, it is paramount.
(c) Ensure that each student has all references and resources.
(d) Ensure that all slides are accurate and in proper sequence.
3. Manage the training and maintain an environment conducive to student learning.
4. To access information about lessons learned, visit the following website: http://www.signal.army.mil/lessonslearned/
5. Suggestions to improve this training document are welcomed. Mark (red-line) a copy of this document and submit it
to Training Development through your supervisor.
NOTE: Informthe students that the terminology contained in the document does not exactly represent the current
terms/functions with how the Army is operating today. Many terms (not the mission/tasks) have changed within the last
year or two; however, the manuals are the latest we have in the system. If appropriate, ask if there is anyone in class
who has insight on the current terms/procedures. If so, have them interject their knowledge to assist with keeping the
information current and relevant. The Signal Center will update the references/material as soon as the doctrine
becomes available.
Proponent Lesson
Plan Approvals
Name
Rank
Position
Date
Jennifer Gray
Not available
Approver
01 May 2013
Conference/Discussion
Signal instructor (1:16/0)
5 mins
Large Group Instruction
The Opposing Force (OPFOR) will continue to present new and different challenges for U.S. forces. The Operating
Environment (OE) is constantly changing, and it is important for U.S. military personnel to keep pace with real-world
developments. As a Signal Support Systems Specialist, you will be entrusted with the responsibility to install the FBCB2
system. The knowledge that you will acquire in this course will help you carry out those responsibilities to the highest
standards while maintaining OE awareness.
Terminal
Learning
Objective
NOTE. Inform the students of the following Terminal Learning Objective requirements.
At the completion of this lesson, you [the student] will:
Action:
Conditions:
Standards:
Install Force XXI Battle Command Brigade and Below (FBCB2) system for operation in
accordance with applicable technical manuals while maintaining OE awareness.
Safety
Requirements
Students will be reminded of the Army Safety Program and its relationship to their conduct and performance at all times.
All aspects of safety will be considered, to include equipment, electrical shock, wet floors, lifting and carrying
equipment, running up and down stairs, horseplay, or anything else that could result in death and/or injury. Handle, use,
store, and dispose of hazardous materials and hazardous waste (e.g., chemicals, cleaning solvents, contaminated
materials, etc.) in accordance with the Material Safety Data Sheets (MSDS), unit SOP requirements, and all federal,
state, local, and Army regulations.
Risk Assessment
Level
Environmental
Considerations
Instructional
Lead-in
1. The Digital Battlefield is being developed and is changing as we speak. With smaller, faster and cheaper
communications systems emerging everyday, we must stay abreast of how each new system will impact our mission.
2. This lesson will provide you with the fundamental skill to understand and operate the FBCB2 JCR System. You will
be provided the opportunity to initialize the FBCB2 for operation, identify functional screen components and user
functionalities, introduction to the Secure Mission Data Loader and Security functions.
Method of Instruction:
Instr Type(I:S Ratio/Qty):
Time of Instruction:
Instructional Strategy:
Media Type:
Other Media:
Security Classification:
Conference/Discussion
Signal instructor(1:16/0)
0 hrs 45 mins
Large Group Instruction
PowerPoint Presentation
Unassigned
This course/lesson will present information that has a
Security Classification of: U - Unclassified.
(3) Tactical Services Gateway (TSG): The major hardware components of an FBCB2-TSG system
include a DELL Ruggedized Laptop and a DC power supply. The TSG provides bridges from lower to upper
TI networks, dynamic IP addresses, Situational Awareness (SA) and Communication and Control (C2)
services.
Show Slide 5 (Backwards Compatibility and Interoperability) AND VG Message Descriptions
(4) JCR provides a more streamlined network structure to allow secure and non-secure platforms to
communicate on a common network. This is accomplished through the use of three JCR products: FBCB2BFT (JCR), Tactical Services Gateway (TSG) and Blue Force Training Network Operations Center (BGN).
FBCB2-BFT (JCR) includes all FBCB2 6.4/6.5 capabilities, a simplified dataset and flattened lower Tactical
Internet (TI), USMC and JCR Log. The TSG provides bridges from lower to upper TI networks, dynamic IP
addresses, Situational Awareness (SA) and Command and Control (C2) services. The BGN provides the
bridge between Satellite-based FBCB2-BFT and Terrestrial-based FBCB2-EPLRS systems, also the bridge
between security domains, (SBU and SECRET), management of celestial network and TSG like functions.
(5) JCR software is designed for maximum interoperability and backward compatibility with previous
FBCB2/BFT software. The table provided on the accompanying viewgraph details these capabilities.
(6) JCR addresses the interdependencies of the 6.4/6.5 software release(s). In the previous release
(6.4/6.5) the software, database, network and hardware were all dependant on each other. The key to JCR
was to remove these dependencies. The FBCB2 6.4/6.5 database system is similar to a phone book, loaded
for every FBCB2 based platform by Div/BCT. This makes the database hard to generate, update and
distribute.
Show Slide 6 (Operation Concepts)
b. Operation Concepts
(1) IP address: JCR dynamically assigns IP addresses. This reduces the amount of planning required for
IP address assignment.
(2) Simplified Data Sets: JCR flattens the network structure so that all units use a common network. The
TOC serves as the access point to the network backbone (WIN-T). JCR also divorces the network from a
hierarchy so that UTO changes do not require network reconfigurations. JCRs simplified dataset is easier to
plan for.
(3) Platform Configuration: Platform configurations are loaded into a local dataset. Platforms are not
required to have other platform configurations.
(4) Platform: There is no longer a direct dependency between platform and role name.
Show Slide 7 (SDSA)
(5) Self Descriptive SA (SDSA): Datasets in JCR are dynamically updated using Self-Descriptive
Situational Awareness (SDSA). Once the Soldier obtains his role and initializes the system, FBCB2/BFT
(JCR) populates the address book and makes it easier to obtain other Platforms roles through the network.
New to JCR, SDSA is the primary mechanism by which information about JCR platforms (platforms that are
broadcasting on the network) is disseminated and updated. Each platform publishes information about itself
to the rest of the community upon login to the network and as often as every four hours for Terrestrial or
upon changes to system information for BFT systems. Updates are broadcast by the BGN every 6 hours.
The information contained in SDSA consists of things such as Unit Reference Number (URN), role name,
map symbology, Internet Protocol (IP) address, and classification. Combined, these elements allow the
platform to populate their local dataset as opposed to loading a preconfigured dataset via the Mission Data
Loader (MDL). When platforms receive an SDSA message, the data is used to populate each platforms
local dataset with the information contained in the SDSA message. In addition, platforms can receive
10
information about another unknown platform by hooking on the platforms icon once noticed on the network
and requesting platform information to populate your address book versus waiting for the network to
distribute it.
c. Security
Show Slide 8 (PED architecture)
(1) JCR uses Type 1 encryption to allow FBCB2/BFT systems to access the secure side of the network.
The Type 1 encryption device is a KGV-72 Platform Encryption Device (PED) and is placed between the
Satellite Transceiver and the Processor Unit to encrypt/decrypt all message traffic to/from the platform to the
JCR Tactical network. The KGV-72 PED uses the JOSEKI Key, Traffic Encryption Key (TEK) and Key
Encryption Key (KEK) to encrypt and decrypt BFT message traffic. The benefits of this encryption allow the
system to process, transmit and receive SECRET data, and Army Battle Command Systems (ABCS) are
fully interoperable with FBCB2-BFT (JCR).
Show Slide 9 (FBCB2-BFT (JCR) System architecture)
d. FBCB2-BFT (JCR) System architecture
(1) The BFT-2 network is faster at disseminating information from one platform to another platform
because the BFT-2 network acts through data reflection. The BFT-2 Satellite Transceiver transmits
information from the platform to the satellite and then down to the Satellite Ground Stations (SGS). From
there, SA and Command and Control (C2) are sent back out to platforms in the same area of operation
through SGS reflection (SGS must be set to reflection mode). Platforms on other beams receive SA and C2
information passing from the SGS to the BGN and then back through the SGS, up the satellite, and then
down to the platforms. The process of SGS reflection removes the necessity of sending information through
the BGN while still copying the messages to them, greatly increasing the speed of network traffic.
(2) The US ARMY and USMC Terrestrial units connect to Upper TI through the TSG/Joint Tactical
Common Workstation (JTCW). FM Radios link to ELPRS nets to connect all vehicles. The EPLRS networks
are then linked through the TOC TSGs to the BGN which connects to the L-Band side of the network.
(3) BGN Tactical Service Gateways provide the bridge(s) between the L-Band side of the network and
the Terrestrial radio equipped side of the network. The BGN provides the inter-operability between the ABCS
and the lower TI for JCR.
(4) The BGN provides the bridge between the Satellite Transceiver based and Terrestrial radio equipped
FBCB2 (JCR) vehicles. It also provides the management of the celestial network and bridges the security
domains (SBU and SECRET).
e. CENTRIX
Show Slide 10 (CENTRIX)
(1) The Armys Secret Domain Network (SIPR) is only certified and designed for supporting US Army
Forces information systems. The International Security Assistance Force (ISAF) Joint Command (IJC) has
mandated the use of a new domain in OEF in order to enable coalition forces to share a Common
Operational Picture (COP) with the US Forces. The new domain is referred to as CENTRIXS-ISAF or CX-I.
The transition of systems to the CX-I domain is not immediate and will happen regionally over time.
(2) FBCB2 systems intended for use on the CX-I network will require a specialized patch that reflects the
classification level. The visual indicator that the system is operating on the CX-I domain is the
SECRET//REL to USA, ISAF, NATO classification banner at the top of the FBCB2 operations screen as
shown.
f. Controls and Indicators for AN/UYK-128(V3):
Show Slide 11 (Controls and Indicators)
11
(1) Display Unit: The DU is a ruggedized Liquid Crystal Display (LCD) display panel with a touch screen
and a keyboard interface. It features a high-brightness capability for operation in full sunlight. The DU
receives power, video, and system status inputs from the processor via the W2 cable. It contains a built-in
USB hub that allows you to disconnect the KU while the DU is powered up. This permits an SecureMDL
device to be connected to the DU at J2, in place of the Keyboard Unit (KU), to download dataset updates
and Mission Data Sets (MDSs). If the DU overheats, automatic sensors lower the setting of the power mode
and dim the display. The vehicle configuration determines the location of the DU mount. The mounting can
be up to 31 ft from the Processor Unit (PU).
(a) The DU has touch screens approximately 12 inches across diagonally and has a Control Indicator
Panel (CIP), containing a row of 10 function keys and three sets of status LEDs, on the left vertical edge of
the display. The DU has a Bezel Keypad with a row of eight buttons at the bottom of the display.
(2) Display Unit Controls and Indicators Panel: The DU has ten control buttons and three sets of light
emitting diode (LED) status indicators. Ten CIP buttons are arranged in a vertical column along the left side
of the display. Some of these buttons have two functions, as indicated by two labels. The top label indicates
the function that is activated by simply pushing the button. The bottom label indicates the function that is
activated by first pressing the function (FCN) button (last button in the row) and then pressing and holding
the labeled button. The CIP controls, when fully functional, include:
(a) PWR: Controls DC power to both the PU and DU.
(b) BRT+/LED+: Increases brightness of the display/LEDs.
1 The BRT+ function increases the brightness of the display.
2 The LED+ function increases the brightness of the status LEDs.
(c) BRT-/LED-: Decreases brightness of display/LEDs.
1 The BRT- function decreases the brightness of the display.
2 The LED- function decreases the brightness of the status LEDs.
(d) BLK OUT/LAMP: Shuts off the display and the status indicators when it is necessary to keep from
revealing a unit's position at night.
1 In BLK OUT, the display is still powered up and the system functions are not affected.
2 The LAMP test function turns on all LEDs to verify they work.
(e) ESC/F1: Closes the Start menu action.
(f) RT/LT Arrows: Moves the screen cursor to the right/left.
1 The RIGHT TAB STOP function moves the screen cursor to the last tab stop on the right.
2 The LEFT TAB STOP function moves the cursor to the last tab stop on the left.
(g) UP/LT Arrows: Moves the screen cursor up/to the left.
1 The UP TAB function moves the screen cursor up one full line.
2 The LEFT TAB function moves the screen cursor one tab stop left.
(h) DN/RT Arrows: Moves the screen cursor down/to the right.
1 The DOWN TAB function moves the screen cursor down one full line.
2 The RIGHT TAB function moves the screen cursor one tab stop right.
Show Slide 12 (Controls and Indicators (contd))
(i) ENT/SPACE: Executes selected screen option (ENT); Moves text to the right one space
(SPACE).
(j) FCN: Accesses the secondary functions of the selected button, when pressed, while selecting any
of the other buttons.
(k) LED Status Indicators: Displays the status of three key system functions: power (PWR), display
12
(DISP), and Central Processing Unit (CPU). Three sets of LED status indicators are located along the righthand edge of the CIP. Each set has three color-coded indicators: Green (Good), Amber (Degraded), and
Red (Failure). Additional status information is indicated by a steady or blinking LED. LED brightness is
adjustable from full bright to full dark by holding the FCN button and pressing the LED+ or LED- button
simultaneously. Possible status indications for each function include:
(l) PWR Status:
1 Green Power on, no problems detected.
2 Blinking Green Heater on.
3 Amber - Power supply output voltage out of acceptable range (PU power).
5 Red - Loss of vehicle power, running on internal battery. DU will operate at reduced brightness.
6 Blinking Red Input power out of acceptable range (vehicle power).
(m) DISP Status:
1 Green DU Ok.
2 Blinking Green Heater on.
3 Amber Temperature warning, degraded display operation.
4 Blinking Amber Communication error (problem at the DU).
5 Red Overheat, DU shut down or failure.
6 Blinking Red Built-in Test (BIT) failure detected.
(n) CPU Status:
1 Green PU Ok.
2 Blinking Green Heater on.
3 Amber Temperature warning, degraded display operation.
4 Blinking Amber Communication error (no message from PU).
5 Red PU shut down or failure.
6 Blinking Red Power-On-Self-Test (POST) problem.
(o) Function Keys and 8-Button Bezel Keypad: The function keys are located at the top of the KU,
and the 8-Button Bezel Keypad is located along the bottom of the display on the DU. There are three
different labeling schemes for the various versions of the Bezel Keypad (various versions not shown). The
following are corresponding labels for each key and the software functions each button controls.
Short cut from KU with OPS main screen opened:
1 F1 - Nav Control
2 F2 Filters
3 F3 - Combat Messages
4 F4 Messages
5 F6 Admin
6 F7 Apps
7 F8 Help
8 F12Create a Mayday Message
Alt Functions from DU or KU with OPS main screen opened:
(p) ALT + F1 Combat Mode: functions as a three-way toggle switch (1-OPS function bar closes, 2Overview Map Control Window and CPS close, and 3-All reopen). When selected, the OPS Function Bar
closes so that the area of the SA map covered by the footprint of the OPS Function Bar can be viewed.
(q) Processing Unit (PU): Provides storage and data processing functions for JCR. It also contains
an audio printed circuit board (PCB) that can drive an outboard speaker or an operator headset for voice
13
communications. An SVGA video adapter built into the motherboard generates the video display for the
DU. The video adapter can provide screen resolutions up to 800 x 600 pixels.
The JV5 PU has a thicker outer casing with molded cooling fins. It has an access door with two snap locks
to secure it at each end. The JV5 PU supports both the DB20 RHDDC (located top left side) and the DB32
RHDDC (located lower right side). The Battery Tray is located to the left of the DB32 RHDDC slot and has
an LCD display built into the front panel. The POST LED indicator is located to the right of the LCD display
and the push button for accessing the LCD display is to the right of the POST LED indicator.
(r) Keyboard Unit (KU): There are two types of KUs that are fielded. Each keyboard key is backlit
for nighttime visibility. The backlighting is adjustable using two brightness keys. Both keyboards approximate
a standard keyboard layout. The pointing devices and associated action keys are built into the keyboards.
The following are the KU controls:
1 KU Basic Keys: Each KU has a full set of number, letter, and punctuation keys that are
arranged in the same pattern as a standard QWERTY keyboard.
2 KU Function Keys: The function keys F3 and F12 are operational when the OPS main screen
is displayed.
3 Backlighting: The KU keys are backlit to make their labels visible at night. The backlight
adjusts keys for the KU. Adjust the lighting of the keyboard from no-visible-backlight to maximum backlight
by holding down the BRT key. To decrease the backlighting of the keys, hold down the BRT key, and to
increase the backlighting, hold down the BRT+ key.
NOTE: For the KU itself, the backlighting is adjustable in six increments, from no backlight to maximum
backlight. When selected, the BLK OUT button on the Controls and Indicators Panel will override any
keyboard backlighting adjustment/setting.
4 Pointing Device: The KU pointing device duplicates the functions of a mouse device. It
consists of a movable pointer and three keys located below it. The pointing device moves the cursor on the
DU screen. The left key selects an object or executes a function. The center key on the three-key device (or
the left and right keys together on the two-key device) is used to move selected files from one folder to
another.
NOTE: Cursor movement occurs by applying pressure on the edges of the pointer button. Applying more
pressure on the pointer button causes the speed of the cursor to increase. Applying pressure on the left side
of the pointer button moves the cursor to the left. Applying pressure on the right side of the pointer button
moves the cursor to the right. Applying pressure on the upper part of the pointer button moves the cursor up,
and applying pressure on the lower part of the pointer button moves the cursor down.
5 Shift Key: The shift key enables entry of uppercase letters or punctuation marks (for example,
Shift + 2 = @, Shift + 7 = &, and Shift + A = A, etc).
6 Alt Keys: When pressed in conjunction with the F1 KU function key, the left Alt key provides
another way to perform the same functions as using the 8-Button Bezel Keypad. The right Alt key does not
perform any function.
(s) Gumball Status Indicators: The gumball status indicators (total of three or four, depending on
configuration) show the current state of all externally connected devices. Status is displayed using a
communications antenna gumball for signal strength and three separate device gumballs using letters and
color for device condition.
1 Color Indications:
a Green: OPERATIONAL or GO. Indicates equipment is configured or the connection between
the AN/UYK-128(V) and the equipment is active, equipment passed all tests, and the equipment is able to
14
support operations.
b Amber: DEGRADED. Indicates equipment is configured or the connection is active but did
not pass all internal tests. The equipment is operational but may provide limited usability.
c Red: NO GO. Indicates equipment is configured but connection failed, or the connection is
active but failed internal FBCB2-BFT (JCR) tests. The equipment is not usable to support operations
d White: NOT TESTED: Indicates equipment is configured or the connection is active but not
tested. This is the state when FBCB2-BFT (JCR) first starts up. After an internal FBCB2-BFT (JCR) test is
performed, the status will change to Green, Red or Amber.
e Black: NOT CONFIGURED. Indicates that FBCB2-BFT (JCR) does not show that this
equipment is available.
2 Signal Quality Indicator (Satellite): The Signal Quality Indicator is the last status indicator
located at the far left of the OPS screen marquee. Represented by the signal strength and automatically
detects status between the Satellite Transceiver and the L-Band satellite. Full signal strength of four bars is
shown if transceiver is in an operational state.
3 Local Comm Gumball Status Indicator: The Local Comm gumball status indicator is located
at the top of the OPS screen on the left of the marquee to the left of the GPS status indicator. Selecting the
Local Comm gumball opens the status window, which helps the operator determine the FBCB2-BFT status
or FBCB2-EPLRS status.
a LOCAL COMM: GO (GREEN indication). Under normal operations, the green status
indicates communications has been established.
b LOCAL COMM: DEGRADED (AMBER indication). An amber status indicates
communications have been lost. The operator must move the platform. (Normal indication for FBCB2EPLRS.)
c LOCAL COMM: NO GO (RED indication): After second and third attempts to find hardware,
a red status indicator may appear, indicating it is unable to establish communication.
d LOCAL COMM: NOT TESTED (White indication). A White status indicator indicates that the
communication device is configured or the connection is active but not tested. This is the state when JCR
first starts up. After the system performs an internal system test, the status will change to Green, Red, or
Amber, as appropriate.
e LOCAL COMM: NOT CONFIGURED (Black indication). A Black status indicator indicates
that a communication device is not available.
4 Global Positioning System (GPS) Gumball Status Indicator: The GPS gumball status
indicator is located at the top of the OPS screen on the left of the marquee to the right of the Local Comm
status indicator.
a GPS: GO (GREEN indication). The green status indicator indicates communication is
established with GPS satellites.
b GPS: DEGRADED (AMBER indication). An amber status indicator indicates status check
(TIME, HEADING, and POSITION). It also means that communications with GPS is degraded, and the
operator should check DAGR settings and verify satellite and Line of Sight (LOS) when the DAGR antenna
is unobstructed.
c GPS: NO GO (RED indication). After the second and third attempt to find hardware, a red
status indicator may appear, indicating the system is unable to establish communications with GPS.
d GPS: NOT TESTED (White indication). A White status indicator indicates that the GPS
device has not been tested. After the system performs an internal system test, the status will change to
15
16
Check on Learning:
Check on Learning:
1. What two programs are combined to form JCR?
Answer: Army FBCB2-BFT and US Army Movement Tracking System
(MTS)
2. How is JCR made to be secure?
Answer: JCR uses a Type 1 encryption device called a KGV-72
Platform Encryption Device (PED)
3. What does a blinking amber LED indicate on the Processing unit (PU)?
Answer: Communication error (no message from PU)
Review Summary:
TLO - LSA 2.
Method of Instruction:
Instr Type(I:S Ratio/Qty):
Time of Instruction:
Instructional Strategy:
Media Type:
Other Media:
Security Classification:
Conference/Demonstration
Signal instructor(1:16/0)
0 hrs 30 mins
Large Group Instruction
PowerPoint Presentation
Unassigned
This course/lesson will present information that has a
Security Classification of: U - Unclassified.
17
NOTE: You have previously learned the DAGR startup procedures in the previous lesson. You will reiterate
your understanding by bringing the DAGR into full operation.
Again, the DAGR provides real-time velocity, navigation, and timing information in a stand-alone receiver
configuration. The DAGR is used by JCR to send platform location information (PLI) through the Lower
Tactical Internet (LTI), including a keypad for controls and an LCD display that presents text, graphics, and
operational indicators.
NOTE: Now that the DAGR has been properly started, you will start up the Satellite Transceiver.
b. Perform Satellite Transceiver startup procedures:
Show Slide 16 (Start Up Satellite Transceiver)
Ensure Satellite Transceiver is connected prior to powering up the AN/UYK-128(V)3.
(1) Switch system circuit breaker on PMA switchbox to ON.
NOTE: For Satellite Transceiver startup, the switch is located on the Power Module Assembly
(PMA)/Switchbox.
(2) Your next step in powering up the system is to start up and login to the AN/UYK-128(V)3 without a
UTO preloaded.
c. Perform AN/UYK-128(V)3 startup/login procedure:
(1) Ensure startup and initialization of DAGR and Satellite Transceiver peripheral components are
complete.
(2) One of the Lessons Learned from OEF/OIF is that following the proper startup/shutdown procedures
is highly critical to successful operations. The correct sequence must be followed.
NOTE: If the system is preloaded with a UTO, refer to TM-11-7010-326-10.
Show Slide 17 (AN/UYK-128(V)3 Startup/Login)
(3) Set circuit breaker/toggle switch (CB-1) on PU to ON.
(4) Select and hold Display Unit (DU) [PWR] switch for up to four (4) seconds and release after Green
PWR Light Emitting Diode (LED) illuminates.
(a) Green PWR, DISP and CPU LEDs cycle in sequence.
(b) Startup continues automatically until the DU displays the Session Manager screen with the Task
bar on the bottom, and the Login dialog box opens.
NOTE: If this is the initial configuration of your system, you will first be prompted to calibrate your touch
screen.
(5) Type password in Password text box.
NOTE: The password is case sensitive. Asterisks are displayed as the password is typed followed by a
blinking cursor in the Password text box. If an incorrect password is entered, the Bad Password dialog box
opens. Select OK and re-enter the password. After three unsuccessful login attempts, the system displays a
warning notice that the maximum login attempts has been exceeded. If the system aborts the login process,
contact the Security Officer/S6.
(6) Select OK. Password Expiration Message dialog box may open if expiration date is within range.
Select OK to close this message. Login dialog box closes and Product Configuration dialog box opens.
d. Conduct UTO load procedures:
NOTE: The Operator will have to perform the Unit Task Organization (UTO) Load procedure only if the UTO
is missing. It is recommended this procedure be taught at the end of the course during another lesson.
(1) The Unit Task Organization (UTO) files should already be loaded onto the SecureMDL for transfer to
the AN/UYK-128(V)3. The UTO files consist of a metadata file and a zipped file (i.e., .tar). The UTO transfer
process is conducted on initial startup of the system or if you have returned to master.
18
Again, the UTO transfer process is conducted on initial startup of the system, if the system is returned to
master, or upon receipt of a new hard drive. Without a UTO load, your system cannot be properly
configured for a role.
CAUTION: It is CRITICAL that you follow the steps to load a UTO EXACTLY or else you will be unable to
role your platform and will be required to re-image the hard drive.
e. Perform Product Configuration:
Show Slide 18 (Product Configuration)
NOTE: There are several reasons why the role may need to be configured for initial startup. For example, a
new hard drive reloaded with JCR software will be configured for a generic role so it would have to be reconfigured.
(1) It is imperative for the operator to know the types of equipment that their vehicle is equipped with for
the system to be properly configured.
(2) Select FBCB2 JCR.
(3) Select OK. Product Configuration dialog box closes and Network Selection dialog box opens.
(4) Select BFT2.
(5) Select OK. Network Selection dialog box closes and L-Band Device Selection dialog box opens.
(6) Select Platform Encryption Device.
(7) Select OK. L-Band Device Selection dialog box closes, and Configure Platform Settings dialog box
opens.
(8) Select Select Platform Type option.
(9) Select Apply.
(10) Select OK. Configure Platform Settings dialog box closes, and Restart Required dialog box displays
the message: Your changes require a restart. Click to reboot or shutdown now.
(11) Select Reboot. System reboots and Login dialog box opens.
f. Configure role for initial startup:
NOTE: Refer back to the notes you took on how to configure your role once the UTO has been loaded inorder to configure your role for BFT usage.
(1) An operator must be cleared with the appropriate SECRET clearance in order to load operational
keys on the KGV-72 PED.
(2) Ensure FBCB2-BFT is operational and configured for KGV-72 PED. If loading the keys individually
without profile the KEK must be loaded prior to loading TEK.
(3) Any PED Status Change dialog box messages will appear on the DU. All other functions are reflected
on SKL. All LED indications are on the KGV-72 PED.
(4) Mode Switch Off and Mode Switch Z are spring loaded on the KGV-72 PEDlift up on knob and twist
to proper location.
Show Slide 19 (Start Up KGV-72 PED)
g. Start up KGV-72 PED
(1) Lift and turn Mode Switch on KGV-72 PED from Off to Run. PED Status Change dialog box opens
on DU and displays the message: Mode changed to Run!
NOTE: KGV-72 PED LED status light should be solid Red, start flashing Red and then Green/Amber
indicating KGV-72 PED has not authenticated to RHDDC.
(2) If not authenticated or on initial start up, the PED Status Change dialog box opens on DU with the
message: Communicator Authentication failure! Select OK to close.
(3) Select OK on DU. PED Status Change dialog box closes.
19
(4) Installing crypto keys does not create a classified DAGR. When classified mission data (e.g.,
waypoints) is stored, the DAGR is classified at the same level as the classified mission data.
h. Load DAGR with Operational Keys Using the SKL
NOTE: Refer back to the notes you took on how to load the DAGR with operational key using the SKL.
(1) This is the preferred method for loading keys. Display or have each student should perform the
procedure to start up the load KGV-72 PED Operational Black Keys with profile on their Simulators.
(2) The profile is the TEK and KEK packaged together so that they will be loaded as one function.
(3) Ensure KGV-72 PED is in the RUN position and LED is flashing Green/Amber.
NOTE: LED status light will go from a flashing Green/Amber to a flashing Green to indicate that the KGV-72
PED has successfully authenticated with the RHDDC when the Mode Switch is changed to ADMIN. The
flashing Green LED status light indicates that the KGV-72 PED requires operational keys to be loaded.
CAUTION: Any previously loaded operational keys (KEK or TEK) will be lost when the KGV-72 PED Mode
Switch is changed to ADMIN and it is connected to a different platform.
(4) Turn Mode Switch on KGV-72 PED from RUN to ADMIN. PED Status Change dialog box opens on
DU and displays the message: Mode changed to Admin!
NOTE: The DU will display a PED Status Change dialog box for every Mode Switch turn. There are two
methods for acknowledging the PED Status Change dialog boxes: each may be closed as they open on the
DU, or they can remain open through the key load procedure, and be closed in succession at the completion
of the key load.
(5) Select OK on DU. PED Status Change dialog box closes.
(6) Verify LED is flashing Green.
(7) Turn Mode Switch on KGV-72 PED from ADMIN to FILL. PED Status Change dialog box opens on
DU and displays the message: Mode changed to Fill!
(8) Select OK on DU. PED Status Change dialog box closes.
(9) Connect SKL keyfill cable to SKL Fill Port.
(10) Connect SKL keyfill cable to KGV-72 PED J1 Fill port.
(11) Press and hold (approximately 4 seconds) SKL Power Push Button (upper top right). SKL powers
on, LED is illuminated, and Logon dialog box opens.
(12) Press screen brightness on SKL (bottom left and right buttons) to adjust backlighting to desired
brightness. SKL screen becomes visible and Logon dialog box opens.
NOTE: It may take several minutes for the Logon dialog box to open. The User ID and Password for the SKL
are unique per device.
(13) Type appropriate User ID in User ID text box.
(14) Type appropriate password in Password text box.
(15) Select OK on SKL. Progress dialog box opens and closes, and Startup Information dialog box will
open.
(16) Select OK. Startup Information dialog box closes. SKL User Access Software (UAS) desktop will
display.
(17) Select the Keys tab.
(18) Select plus sign (+) to expand folder. Verify correct KEK short title.
(19) Select plus sign (+) to expand folder. Verify correct TEK short title.
(20) Select Eqs tab. A list of equipment is displayed.
(21) Select equipment KGV-72 Prime on SKL.
(22) Select LOAD (upper right-hand corner) on SKL. LOAD ECU Wizard displays message: Listing
20
21
NOTE: An hourglass displays briefly and then disappears when the Green LED at the top of the SKL is no
longer illuminated.
CAUTION: The Green LED on the SKL must turn off before powering down the SKL to prevent possible
database corruption.
(42) Press and hold SKL Power Push Button until countdown appears on the screen.
i. Change System Classification
Show Slide 20 (System Classification)
(1) The students should perform the following procedure on their system. Inform students that this is not
generally an Operator task since it requires the Admin password to complete.
NOTE: Once an FBCB2/BFT (JCR) system possesses the SECRET classification banner, the RHDDC is
now classified SECRET. In order to declassify the RHDDC, an approved purge station must be utilized.
(2) Select Start > FBCB2 > SysAdmin
(3) Type password in Enter Password text box.
(4) Select Continue. System Administration Dialog dialog box opens.
(5) Select Configure System tab.
(6) Select Configure System Classification. System Classification dialog box opens.
(7) Select SECRET. Security check dialog box opens and displays a message: Changing the
classification level will result in a higher security level. Once this is done, the system classification cannot
return to the lower classification level. Are you sure you want to do this?
(8) Select OK. Security Check dialog box closes. System Classification changes to SECRET.
(9) Select Exit. System Classification Dialog dialog box closes.
(10) Select Close. System Administration Dialog dialog box closes. The classification banner on the
OPS screen changes from green UNCLASSIFIED to red SECRET.
(11) You are finished with your initial equipment preparation. Now you must shut down the system. Begin
with the FBCB2-BFT (JCR) computer.
NOTE: Unless otherwise directed to a VG or simulation, perform these procedures using a live FBCB2-JCR
system.
j. Perform AN/UYK-128(V)3 shutdown procedure:
Show Slide 21 (AN/UYK-128(V)3 Shutdown Procedures)
CAUTION: Do not shut off power to the PU without first following the system shutdown procedure. Failure to
comply may cause loss of program data or damage to the PU.
CAUTION: Leaving the PU circuit breaker/switch set to ON will enable the battery pack to continuously
charge as long as external DC power is available. This could possibly result in a dead vehicle battery if left in
this condition over an extended time period.
(1) Select Start > Shut Down > Shut Down. Shutdown confirmation dialog box displays message: Do
you really want to SHUT DOWN the system?
(2) Select Yes. System closes all applications and shuts down. System is shut down when screen goes
blank.
(3) Set CB-1 power switch on PU to OFF position.
SCENARIO: The computer is shutdown, so now move on to the satellite transceiver and power it down.
k. Perform Satellite Transceiver shutdown procedure:
(1) Switch system circuit breaker on PMA/S1 switchbox to OFF. Satellite transceiver shuts down.
NOTE: For satellite transceiver shutdown, the switch is located on the Power Module Assembly
(PMA)/Switchbox.
22
Check on Learning:
Check on learning:
1. What is the proper order for the shutdown procedure?
Answer: AN/UYK-128(V)3;Satellite Transceiver: KGV-72 PED; DAGR
2. Does installing crypto keys make a DAGR classified?
Answer: No. When classified mission data is stored, the DAGR is
classified at the same level as the classified mission data.
Review Summary:
TLO - LSA 3.
Method of Instruction:
Instr Type(I:S Ratio/Qty):
Time of Instruction:
Instructional Strategy:
Media Type:
Other Media:
Security Classification:
Conference/Demonstration
Signal instructor(1:16/0)
0 hrs 30 mins
Large Group Instruction
Training Device
Unassigned
This course/lesson will present information that has a
Security Classification of: U - Unclassified.
SCENARIO: In preparation for the PCI you must be able to identify the various start menu functions.
Show Slide 23(Start Menu)
a. Access Start Menu:
(1) Select Start from main screen. Start menu opens.
The Start menu displays a vertical menu to provide access to various user functions other than OPS. We will
only cover the areas that pertain to the 25U Signal Support System Specialist:
(a) Help: Accesses the Help functions. Selecting this option displays a submenu with two options:
1 Show Software Version: Displays software information. Selecting this option opens Version
Viewer dialog box and displays software versions and system classifications.
2 Main Help: Displays list of help topics. Selecting this option allows viewing of help topics
through the Table of Contents structure, searching for any keywords through the Index feature, finding the
meaning of abbreviations used within the system through the Glossary feature, and doing a Quick Search on
any word or phrase.
(b) Platform Encryption Device Manager (FBCB2-BFT2 with KGV-72 PED only): Controls the
23
interface between the JCR, the Satellite Transceiver, and the Platform Encryption Device (PED). Selecting
this option displays a submenu with four options:
1 Show Info: Displays detailed information about the KGV-72 PED.
2 Set Up: Sets up the data rates and configurations for the KGV-72 PED.
3 Key Management: Displays key information and activates and deletes keys.
4 Advanced: Accesses the advanced tools for the KGV-72 PED.
(c) Transceiver Manager: The Transceiver Manager Tools dialog box offers the following functions:
Show Info and Advanced.
1 Show Info: Allows you to view your transceivers current status.
2 Advanced:
a Zeroize Transceiver: Deletes the transceivers transmission encryption key.
b Set Transmit Inhibit (Aviation Only): Disables outbound message traffic.
(d) GPS/SAASM Control:
(2) Management Utility: Displays status and current configuration of GPS receiver, including: current
platform position, altitude, heading, speed, figure of merit (FOM), time figure of merit (TFOM), number of
visible satellites, signal strength, coordinate system in use, elevation hold settings, and key status.
(3) Zeroize Utility: Provides the capability to Zeroize GPS receiver. This action will remove all key
information.
NOTE: The Zeroize utility does not provide a countdown to abort. Once the Zeroize Data and Mission Keys
dialog box displays the message, Warning: This action will permanently delete the mission and data keys
from your GPS. Are you sure you wish to proceed? Selecting Yes will immediately Zeroize the key.
Selecting No will abort the process.
(a) ROC-V: Recognition of Combat Vehicles (ROC-V) helps train operators to identify combat
vehicles in day view as well as their thermal signatures. Through the use of virtual sight controls, operators
learn to effectively adjust their thermal image to find targets and bring out their thermal ID cues.
(b) Settings: Provides the ability to modify several settings on FBCB2-BFT (JCR). For example, you
may need to adjust audio or screen brightness settings to enforce noise or light discipline during operations.
Selecting the Settings option displays a submenu with the following six options.
(4) Keyboard: Sets keyboard auto repeat ON or OFF. When keyboard repeat is ON, holding down a key
repeatedly inputs associated character until key is released.
INSTRUCTOR NOTE: Keyboard repeat OFF is recommended setting.
(a) Mouse: Sets mouse movement settings. Adjusts mouse acceleration settings from Slow to Fast
and distance before mouse accelerates from Short to Long using horizontal slider bars. Numerical values
display above slider bars. Set back to factory default settings by selecting Default. For example, you may
want to use a slower mouse setting to account for vehicle movement over rough terrain.
(b) Configure Taskbar: Configures Marquee Scroll Rates for Warnings and System alerts and sets
Local Time Zone for platform.
(c) TouchScreen Calibration: Realigns hardware touch-sensitive display sensors with the software
touch sensor screen addresses.
(5) Open Office: Allows the SECRET user to access the Open Office application. Open Office can be
used to create document, spreadsheets and presentations.
(6) FBCB2: Displays vertical submenu to provide access to various functionality based upon system
configuration and user role, including:
(a) Screen Image Utility: Captures and prints window and screen shots. For example, you may need
24
25
26
1 Zoom Control: the arrows allow the user to move the map either up, down, right or left,
depending on the directional arrow selected. The plus symbols zoom in on a location while the minus symbol
zooms out. The sliding arrow on the scale indicates the level of zoom on the visible map.
2 Pan Box: a small window that shows in more detail the currently displayed map screen. This
feature is not typically used in TIGR Co-Host as it significantly slows the system.
3 Scale: indicates the scale being used for the map and changes with the zooming in/out of the
map.
a Location: indicates the coordinates for the visible maps center.
b Layers: enables the user to hide/show icons, pictures and/or drawings on the currently
displayed map. A checkmark in the box next to the label indicates that the layer is visible on the map.
4 Hide/Show Arrows
a Left arrows: four collapsible arrows that control whether the following areas are visible or
hidden: TIGR menu title bar, map zoom controls, pan box and the scale, center location, and layers controls.
b Right arrow: a collapsible arrow that controls whether the search results are visible or
hidden.
Show Slide 27 (TIGR Co-Host Search Tab Overview)
(d) Search Tab
1 Find: the Type, Source, and Range dropdowns allow for the specification of criteria to be used
in the search.
2 Area Search: selecting the Area Search button limits the returned results to a specific area
and enables searching for specific information within an area of interest.
3 Route Search: selecting the Route Search button limits the returned results to a route area
and enables searching for specific information along a planned route.
4 More: The more option, when clicked, displays an additional row of search criteria that allow
for the conducting of an advanced search. The additional search criteria fields displayed are:
a Containing the word: use this field to enter specific search criteria not available through
provided search options.
b With Any Category: use the dropdown to limit search results to a specific category.
c In any Unit: use this dropdown to limit search results to a specific unit.
NOTE: Equipment must be in the following condition to perform this procedure:
NOTE: User is logged in as Secret User on Secret system and has an account for the TIGR Co-Host.
NOTE: The SecureMDL Device connects to the J2 on the DU therefore all entries must be done via Touch
Screen with Virtual Keyboard. It is assumed that the SecureMDL has been initialized, personnel performing
the procedure have been properly cleared and briefed, and has a password and contains the TIGR Co-Host
SneakerNet files.
NOTE: It is important to remember that this data is un-correlated and may not be completely reliable
intelligence. Care and discretion must be used when evaluating and inputting data to maintain as accurate
information as possible.
NOTE: JCR is operating in the background while TIGR Co-Host is running and JCR Situational Awareness
(SA) is not visible; however, the FIPR is still visible.
Show Slide 28 (Import SneakerNet Files)
b. Import SneakerNet Files
(1) Disconnect keyboard cable from J2 connection on the DU.
(2) Connect SecureMDL to the JCR system through the J2 connection on the DU.
27
(3) Select Start > FBCB2 > PFF Management. Personal File Folder Manager dialog opens.
(4) Select SecureMDL Device in the Source Pane by double tapping the screen quickly. Enter
SecureMDL Device Password dialog box opens.
(5) Type appropriate password.
(6) Select OK. System performs a virus scan, Enter SecureMDL Device Password dialog box closes
and displays files in the directory tree under the SecureMDL Device Folder.
(7) Select the SneakerNet file from the directory tree. (SneakerNet is viewed by the JCR system as two
separate files, one with a .001 identifier to distinguish them).
(8) Select My_Documents in the Destination Pane.
(9) Select -> to copy the SneakerNet file to destination.
(10) Repeat steps g. to h. for all SneakerNet files to be copied.
(11) Select Close. Personal File Folder Manager dialog box closes.
(12) Disconnect the SecureMDL Device.
(13) Select Start > TIGR. TIGR Mozilla Firefox opens
(14) Type user name in User Name field.
(15) Type appropriate password in Password field
(16) Select Login.
(17) Select TIGR Start menu at top of screen.
(18) Select Admin >SneakerNet. Admin SneakerNet Import and Export window opens with three tabs:
Export SneakerNet, Import SneakerNet, and Troubleshooting.
(19) Select Import SneakerNet Tab.
(20) Select Browse.
(21) Select SneakerNet file from the File Upload Directory Pane. File will display automatically in the
Selected Files Pane.
(22) Select Done.
(23) Select Start. The page at http://localhost says: Dialog Box displays "Importing sneaker net job
placed on the queue".
NOTE: If your file is encrypted, you will be prompted to enter a password to continue.
(24) Select OK.
(25) Select the x in the upper right corner of the Admin SneakerNet Import and Export window to close
dialog box.
(26) Connect keyboard cable through J2 connection.
Show Slide 29 (Export SneakerNet Files)
Display imported events
(1) Select TIGR menu > Admin > SneakerNet. SneakerNet Import and Export dialog box displays.
(2) Select Import SneakerNet tab.
(3) Select Browse. Upload Select SneakerNet File dialog box opens.
(4) Select required SneakerNet file from pff_temp_folder. Selected file appears in Selected Files pane.
(5) Select Done. Upload Select SneakerNet File dialog box closes and selected file appears in text box
on the Import SneakerNet tab.
(6) Select Start. The page at http://localhost says dialog box opens.
NOTE: If your SneakerNet file has been encrypted, you will need to enter a password to continue to decrypt
the file.
(7) Select OK.
28
29
(6) Using the arrow, expand the Range dropdown. Field defaults to Anytime.
(7) Select Anytime.
(8) Select the Search button. Search results are displayed in the Search Results window.
To perform an Advanced search for an Event:
(1) Select the More option to type in a custom search string. Additional criteria fields display below.
(2) In the Containing the words field, enter search string IED.
(3) Click the Category field.
(4) Select a Category. Select Hostile Actions.
(5) Click the Unit field.
(6) Select Unit.
(7) Select the Search button. Search results are displayed in the Search Results window.
Show Slide 32 (TIGR Co-Host Search Results Overview)
The Search Results window, which displays returned results from an executed search, contains several
buttons and option menus that allow you to perform additional functions.
NOTE: If no results have been returned on an executed search, the Search Results window will have no
results listed.
(1) Show All/Hide All: shows/hides the returned search results in the window.
(2) Clear: selecting the clear button clears the returned search results from the window.
(3) Options: a dropdown that provides additional options for the search results. This dropdown allows
you to zoom/center on all of the results when viewed on the map, save the search results, and export the
results to a CSV file.
(4) Per Page: a dropdown that allows you to control the number of search results displayed within the
window. The numbers appearing to the right of the dropdown are the page number links.
To save search results:
NOTE: To save a search, you must have first successfully executed a search and the search results screen
must be visible.
(1) In the Search Results window, select the Options dropdown.
(2) Select Save This Search. The New Saved Search window appears.
(3) Enter a name for the saved search.
(4) Click the Make this my Startup Search checkbox to have this search load on startup.
(5) Select Save.
(6) The Search Status window appears indicating the search was successful.
INSTRUCTOR NOTE: The students should perform the procedure to export TIGR Co-Host Data to a
SecureMDL on their systems.
NOTE: Equipment must be in the following condition to perform this procedure:
User is logged in as Secret User on Secret system and has an account for the TIGR Co-Host.
The SecureMDL Device connects to the J2 on the DU therefore all entries must be done via Touch Screen
with Virtual Keyboard.
Show Slide 33 (Export TIGR Co-Host Data)
To Export TIGR Co-Host Data to a Secure MDL
(1) Ensure TIGR is running and you are logged into the system.
(2) Disconnect keyboard cable from J2 connection on the DU.
(3) Connect SecureMDL to the JCR system through the J2 connection on the DU.
(4) Select Admin >SneakerNet. Admin SneakerNet Import and Export window opens with three tabs:
30
31
7 Select Map as the data entry method for Location using drop-down arrow.
INSTRUCTOR NOTE: Have the operators select Map and select a location on the map.
8 Select less than 25 for Quality option.
9 Type course, 110 degrees, in Course text box.
10 Type speed, 10 kilometers per hour, into Speed text box.
11 Type elevation, 2030 feet, in Elevation text box.
NOTE: Altitude is used only for airborne platforms.
12 Select Apply.
NOTE: Once course and speed have been entered (either manually or supplied by the GPS), an arrow
indicating your current course will appear underneath your own SA icon.
Show Slide 35 (Misc Platform Functions)
l. Perform Misc Platform functions:
The Misc tab displays radio device information and allows configuration of the Medical Evacuation
(MEDEVAC) settings. Requestors Call Sign and MEDEVAC Voice Net ID must be set to create a
MEDEVAC message.
(1) Ensure Admin dialog box is open.
(2) Select Platform tab.
(3) Select Misc subtab.
(4) Type RENEGADE6 in Requestors Call Sign text box.
(5) Type 345 MEDEVAC Voice Net ID text box.
(6) Select Encrypted in Voice Net Text Mode area.
(7) Type 225 in Voice Net ID text box.
(8) Select Apply.
m. Set Local Display/Messages options:
The Local tab is used to set display and message settings per your units Digital SOP and as required by
tactical situations. The Reminder Dialog, Chembio Auto Send, Engagement Auto Send, and Call for Support
Auto Send settings can be set to On or Off depending hardware configuration and availability.
(1) Ensure Admin dialog box is open.
(2) Select Local tab.
(3) Select Display/Messages subtab.
(4) Select appropriate options:
(a) Select On for Reminder Dialog option to enable system to send periodic reminders that are set up
through Apps functionality. If reminder setting is set to Off, the user will not be notified at the time a periodic
reminder is set to occur.
(b) Select On for Chembio Auto Send option to enable system to send Chembio message types
automatically.
(c) Select On for the Engagement Auto Send option to enable system to send Engagement
Report/BDA message types automatically.
(d) Select On for Call For Support Auto Send option to enable system to send Call for Support Auto
Send message types automatically. This feature only works for those platforms that have a SMART system
installed.
(e) Select number of seconds (3 through 10) to scroll Warnings in marquee by using Warnings dropdown arrow.
(f) Select number of seconds (3 through 10) to scroll System Alerts by using System Alerts drop-
32
down arrow.
(g) Select a local time zone by using Local Time Zone drop-down arrow.
(5) Select Apply.
Show Slide 36 (Own SA Setting)
n. Select Own SA settings.
Own tab is used to control the reporting mode for own position report. There are three reporting modes:
Auto, Manual, and Off. Each mode controls how own position report is transmitted per your units Digital
SOP and as required by tactical situations.
(1) Ensure Admin dialog box is open.
(2) Select SA tab.
(3) Select Own subtab.
(4) Select appropriate options:
(a) Select Reporting Mode. Options include Auto, Manual, or Off.
1 In Auto mode, the dissemination of own position is based on two filters, time and motion that
can be configured within SysAdmin.
2 Manual mode allows position to be set manually, and it will override any system-generated
position (e.g., GPS data). The system will retain and disseminate the manually-set position to the network. A
visual indicator appears in grid coordinate area.
3 Off mode will not disseminate position to the network; however, the own position icon will
remain in SA map display and will continue to receive/display system-generated position in SA map display
only. Any previously disseminated position reports will remain on any systems that received your position
until the icon ages out. A visual indicator appears in grid coordinate area.
(b) Select Hide SA Configuration to hide own position from displaying on other platforms. Hide SA
Configuration dialog box opens with the option to Auto-Unhide or Hide and to determine Hide Settings.
1 Select appropriate option for Unhide When System Destroy Message Sent.
NOTE: Yes option will automatically display own local position icon on all other platforms when a Destroy
System message is sent. No option will keep own local position hidden after a destroy message is sent.
2 Select appropriate option for Unhide when Mayday Message is Sent.
NOTE: Yes option will automatically display own position icon on all other platforms when a Mayday
message is sent. No option will keep your position hidden after a Mayday message is sent.
3 Select appropriate option for Hide Options:
NOTE: The Hide Options option specifies if own system should always be displayed, always hidden, or
conditionally hidden.
a Select Display Always option so all platforms can see your position on their SA display
map.
b Select Hide Always so no other platform can see your position on their SA display map.
c Select Conditional Hide to allow Hide Settings to be configured (e.g., Display on Selected,
Display on SOF (Special Operations Forces), and Display when in Proximity).
4 Select Display on Selected check box(es) of Hide Settings area to apply conditional hide
settings. This selection(s) is/are only active when the Conditional Hide option is selected.
a Select Selected Roles. Hide SA Selected Roles dialog box opens.
b Select Add Role. Select Roles dialog box opens.
c Select appropriate roles.
d Select OK. Select Roles dialog box closes.
33
34
35
36
degrees around a point selected on the map screen for a determined radius.
(d) Color Units by UTO: Allows the user to specify a color for a selected unit based on the UTO. If
the colors for the upper and lower echelons are specified, the color for the lower echelon is displayed.
(e) Commanders View: Allows the commander to quickly assess his/her combat readiness status,
and logistics personnel to assess the units that require priority of support. This functionality also provides
headquarters personnel immediate access to the latest updates from forward units without having to request
it via a message or FM Radio.
(f) Configure Slant Report: Allows a commander to select a list of primary combat vehicles that a unit
has under its control.
(g) Convoy Patrol Group Manager: Enables the establishment and maintenance of CPG information.
(h) Status and Logistics Reporting: Provides the ability to Add or Remove the units receiving the
Status and Logistics Reporting.
(2) Create Periodic Reminders:
This feature allows the creation of periodic reminders. Reminders can be set for notification for a single
event, daily, weekly, monthly, or floating. We will discuss the procedure to set a one-time reminder.
(3) Identify Friendly SA Status:
This functionality displays the age (currency) of position report data for all platforms in own unit, or
subordinates (if applicable).
NOTE: Friendly SA Status will report subordinate units only.
NOTE: Data displayed in the Friendly SA Status dialog box includes (a) Currency Color Indicator, (b) Total
Platforms, (c) Report Generated On, (d) Name, (e) Delta, (f) Last Report, (g) Location, (h) Hook, (i) Center
On, and (j) Refresh:
Show Slide 41 (Status Function)
r. Access Status function:
The operational status of the GPS (DAGR), Terrestrial or Satellite Communications, and other peripheral
equipment is indicated by the Gumballs at the top left of the marquee of the OPS Display Screen.
NOTE: The Gumballs serve as a hyperlink to the Status dialog box. The Status dialog box allows the user to
access the (a) Systems, (b) SA, and (c) General tabs:
(1) Systems tab: Displays information about the platforms communication and GPS status.
(2) SA (situational awareness) tab: Displays information about the status of your terrestrial-based or
satellite-based networks and SA counts.
(3) General tab: Displays information about disk utilization.
s. Identify system status:
The Systems tab group is used to view the communication status of the GPS and local communication
devices. The status of the device is listed as Go or No Go.
NOTE: The list of devices and interfaces described vary based on the platform role and configuration. There
is a subfolder for each communication device used with FBCB2-BFT (JCR).
t. Identify LOCAL COMM status levels for FBCB2-BFT2 configuration:
The LOCAL COMM status applies to the FBCB2-BFT2. It provides an indication of how the KGV-72 PED
and Satellite Transceiver are functioning.
(1) BFT2:
(a) Go: Under normal operations, the green status indicates established communications.
(b) Degraded: Amber status indicates lost communications or operator action required to move the
platform.
37
(c) No Go: After the second and third attempt to find hardware, a red status may appear, indicating
communication could not be established or operator action is required to check power, check cable, or to
reboot the system.
(d) Not Tested: A white status indicates that the connection to the satellite has not been tested. For
example, if a FBCB2-JCR system is configured for BFT2 but not connected to the transceiver.
(2) KGV-72:
(a) Go: Indicates that keys have been filled, the KGV-72 PED has been authenticated to the RHDDC
and is able to communicate and disseminate information from the Satellite Transceiver.
(b) No Go: KGV-72 PED is not authenticated with the RHDDC and is not communicating with the
Satellite Transceiver.
(c) Identify GPS status levels:
GPS folder reflects status of DAGR as indicated by color of gumball on Classification/Status bar. A gumball
is either Green or Red, indicating Go or No Go.
NOTE: Opening the GPS folder shows the associated subcomponents and corresponding status of each.
The GPS folder contains the (a) Time, (b) Heading, and (c) Position:
1 Time: Displays the Time Figure of Merit (TFOM) quality.
2 Heading: Displays the quality of the heading received from the GPS.
3 Position: Displays the Figure of Merit (FOM) quality.
u. Identify Situational Awareness (SA):
The SA function is used to give the user information on the Current SA server, the Broadcast net, SA net
member count. The server has connectivity and status on TI location quality. This connectivity will be
indicated by the ability to see the net members and other friendly icons. SA area lists total number of known
Friendly and Observed SA positions (icons) and displays average age for each.
(1) Current SA Server: Indicates SA server for FBCB2-BFT (JCR) (either self, or an EPLRS server in
network (i.e., Platoon Leader or In progress)).
(2) Frequency ID: Example: 123 Frequency is composed of three numbers for hopset of ASIP radio.
(3) SA Net Member Count: Number of clients connected to same SA server.
(4) Server Connectivity: Represents reporting and communications status of FBCB2-BFT (JCR) on a
specific network to assigned server. The color of server connectivity indicates:
(a) Green: Operational
(b) Amber: Degraded
(c) Red: Not Reporting
(d) White: Not Tested
(5) TI Location Quality: Identifies if platform has interfaced with TI. If the gumball is Not Tested (W), only
SA of self will be received. The gumball must be Green (G) to be in the TI to receive all SA being populated.
The color coding indicates the same information as the color coding for server connectivity.
(6) Net Member: Indicates network member identification based on platforms in dataset that are
assigned in same NET as operational system. This is the role names of the platforms in the NET.
(7) Currency: Represents reporting and communications status of FBCB2-BFT (JCR) on a specific
network. Currency reflects the user-defined friendly SA settings information. Currency displays one of the
following based on last time the listed system updated its position:
(8) Loc Quality: The location quality is based on quality of GPS location when position report was last
updated. This would be reflected with Good, Degraded, or Unknown.
(9) Orig. DTG: The Originator Date Time Group indicates when a certain Net Members position report
38
39
40
Check on Learning:
Check on learning:
1. The Platform Encryption Device manager controls which interface?
A. Zeroize Utility
B. Satellite Transceiver
C. Management Utility
Review Summary:
TLO - LSA 4.
Method of Instruction:
Instr Type(I:S Ratio/Qty):
Time of Instruction:
Instructional Strategy:
Media Type:
Other Media:
Security Classification:
a. Explanation to students.
(1) Ask check questions throughout the practical exercise.
(2) Prepare shop training area prior to class
(3) Use the solution sheet to track each students progress during the practical exercise.
(4) If a student completes all the requirements of the practical exercise by the allotted time, assign
additional tasks that reinforce learning activity.
(5) All students must complete the requirements of the practical exercise in allotted time.
(6) During this practical exercise you will demonstrate your skills and ability to initialize the FBCB2 and
perform various operational procedures.
(7) When you complete the exercise evaluate your performance.
(8) Do you have any questions pertaining to this PE?
(9) If you have no (more) questions, you may start your exercise by following the directions on your
practical exercise.
41
b. Application by students.
(1) Perform the listed activity to the best of your ability as directed.
Check on Learning:
Review Summary:
TLO - LSA 5.
Method of Instruction:
Instr Type(I:S Ratio/Qty):
Time of Instruction:
Instructional Strategy:
Media Type:
Other Media:
Security Classification:
Conference/Discussion
Signal instructor(1:8/0)
1 hr 0 min
Large Group Instruction
PowerPoint Presentation
Unassigned
This course/lesson will present information that has a
Security Classification of: U - Unclassified.
42
(5) Type appropriate name in Folder/File Name text box. Type SPOT Reports.
(6) Select OK. Enter File/Folder Name dialog box closes. SPOT Reports folder appears under Saved
folder.
NOTE: After folder is created, it can be renamed, moved, or deleted.
(7) Have students create additional folders named OVERLAYS, REPORTS and REDCON at this time for
use later in the course.
SCENARIO: There are several ways to speed up sending messages. One way is to set up message
address groups which you will do next.
c. Create address group:
(1) The Address Groups function is used to set up and manage groups of message addressees. Groups
can be added, renamed, or deleted, and individual addresses within groups can be added or deleted.
Changes to address groups that have been previously associated with a message will not be carried over to
that message. Changes to a previous messages address group must be manually entered.
(2) Each platform may have one or more predefined user address groups. A platforms role determines
which groups exist and the addresses in each group. The address groups consist of groups that the platform
belongs to by doctrine, groups that the platforms echelon owns, and groups that the platforms parent
organization owns.
(3) Ensure Messages dialog box is open.
(4) Select Address Groups in folder pane.
(5) Select Add Group. Enter Group Name dialog box opens.
NOTE: Naming conventions need to be standardized within a unit to prevent confusion. This is usually
established in a units Standard Operating Procedure (SOP), which can encompass folder names,
messages, and overlay names. The naming conventions should recognize the fact that using a different mix
of upper-, lower-, or mixed-case letters for the same folder or file name will produce another document.
(6) Type name of new group in Group Name text box. Type TOC.
(7) Select OK. Enter Group Name dialog box closes, and new folder displays in right pane of Messages
dialog box under User Address Groups.
d. Add addressee to group:
(1) Select appropriate folder in right pane. Select TOC.
(2) Select Add Addressee. Select Platform dialog box opens.
(3) Select appropriate options in Criteria pane.
(a) Select 3-CPS for Corps.
(b) Select 4-ID for Division.
(c) Select 4-BCT-1-AD for Brigade.
(d) Select 4-BN-6-IN for Battalion.
NOTE: The platform designations that display in the Matches list can be limited to Top Units, as applicable,
by selecting the Top Units feature. This list can also be limited by selecting the Platforms, Units, or All filter
options. In addition, all matches in the list can be chosen by selecting the Select All features.
(4) To select multiple addresses individually, hold the Ctrl key while selecting. To select a block of
multiple addresses, hold the Shift key. To select all addresses, select Select All. Hold the Ctrl key and
select desired addresses to select multiple non-consecutive addresses.
(5) Select TOC-4BN6IN-4BCT1AD in the Matches field.
(6) Select OK. Select Platform dialog box closes.
NOTE: The steps for deleting an addressee or folder are basically the same. When a folder is deleted, all
43
44
your units Digital SOP. You begin the tactical roadmarch to your new Area of Responsibility (AOR) based
out of FOB Fenty. Along the route your vehicle gunner spots a possible IED in the road. You are out of FM
communications range with both the Forward Staging Base you just left and FOB Fenty. You quickly send a
SPOT report with your FBCB2-BFT (JCR) system.
Show Slide 47 (SPOT Report)
g. Create SPOT Report:
(1) The SPOT Report message is used to report enemy/friendly activity. It is used to report essential
information covering events or conditions that may have an immediate and significant effect on current
planning and operations. When the report is transmitted, the system will automatically display an icon at the
reported location on the Situational Awareness (SA) display.
(2) The SPOT Report will broadcast an icon to all platforms on the Tactical Internet (TI) with just one
addressee selected. Those that need to receive the Spot Report message in the FIPR queue in addition to
the default addressees must be addressed.
(3) There are three Quick Send buttons to create SPOT Report messages for IEDs, Vehicle Born IEDS,
and Dismounted Personnel. SPOT Reports can also be created by selecting Access Message Manager
Dialog from the OPS main screen.
NOTE: The procedures below demonstrate reporting a suspected IED via a SPOT report. The report will
contain only what the operator observes so not all fields are used in this instance. Cover unused fields in the
report as necessary.
(4) Select Create spot report for IED from OPS main screen. User is directed to select a grid location
from the map.
(5) Select grid location (42SXD 2584 1097) of the suspected IED on the map. Combat Messages
window opens to the SPOT report tab, with these fields filled by default based on the grid selection:
(a) Line 2: Activity: Stationary
(b) Line 3 Location*: 42SXD 2584 1097
(c) Line 5 Time/Observed DTG: Time message was created
(d) Line 6 Equipment 1: IED
(e) Affiliation: Hostile
(6) Select Affiliation option. Select Hostile.
NOTE: The SPOT report can be sent without any additional inputs at this point. If additional information
needs to be included, populate the additional fields before sending.
(7) Select Comments. SPOT Comments dialog box opens.
(8) Type comments in Enter Comments text box. Type Suspected IED spotted on south side of
road.
NOTE: The plus (+) sign that is displayed adjacent to Comments in the dialog box indicates comments have
been entered.
h. Send SPOT Report:
(1) Select Send. Addressee Availability dialog box may open.
NOTE: The Addressee Availability screen only appears if units addressed in the message have a reporting
status other than Current.
(2) Message addresses display with a color-coded background that represents their reporting status
based on the current SA settings:
(a) Lime Green: Current
(b) Olive Green: Stale
45
46
NOTE: If you have not pre-addressed MEDVAC messages during your initial setup, you will have to select
Action button to address the message. Otherwise, you will receive an error message stating Send failed
No Addressee selected.
k. Prepare and send a Fire Mission Message
SCENARIO: After the chlorine gas attack, you continue the roadmarch. The convoy stops a little while later.
You receive a radio call from the convoy commander that another unit close by is receiving mortar fire. Your
vehicle gunner then reports he can see an enemy mortar team on a distant hill. You prepare an indirect fire
mission.
(1) Select Call for Fire message quick send (CFF). Combat Messages dialog box opens to the Fire
Mission and CFF tabs.
(2) Select Adjust Fire in Mission option.
(3) Select At My Command in Method of Control option.
(4) Select Mortar in Equipment: (Target) option.
(5) Type 1 in the text box adjacent to Equipment: (Target) option.
(6) Type 42SXD 31535 13688 in Target Location.
(7) Select the Time of Target option.
NOTE: Time of Target is only available when Type of Mission options is Timed Time on Target.
(8) Select Send to send message.
SCENARIO: You successfully engaged the enemy mortar team and once again move out. As you continue
through Jalalabad, you begin to have issues with your FM communications, even within the convoy. You
then hear a beeping sound and notice your BFT screen is flashing a number in the FIPR box.
Show Slide 49 (Message Retrieval)
l. Access messages in FIPR queue:
(1) The Flash, Immediate, Priority, and Routine (FIPR) Precedence Message Notification queue displays
the number of received messages by precedence. A Flash message is the highest priority message in the
FIPR queue, followed by Immediate, Priority, and then Routine. Upon creation, the sender selects the level
of precedence for a message. For example, MAYDAY and Call for Fire messages will always be preset as a
Flash message by default. When an incoming message has been received, the appropriate FIPR button will
highlight black and flash, providing a visual indicator that a message has been received. Once all unread
messages have been read, the FIPR button will return to solid gray. In addition, an audible alarm of short
duration will sound. Audible alarms are best heard through Combat Vehicle Crews (CVCs). In normal
operating conditions with vehicles running and without CVCs, the alarms, most likely, will not be heard.
(2) A plus (+) sign on a precedence button indicates one or more messages requiring an OR. (The
exception is a Field Order, which does not allow for an OR. OR is available to the sender when the message
is being addressed through Message Addressing; however, the recipient is not able to respond using the OR
function.)
(3) Select FIPR with number 2 to access a message.
NOTE: The message listing has five columns: Sent DTG, Msg Type, Originator, OR, and A (Secret systems
only). The Sent DTG column provides the date and time that a message was sent. The Message Type
column indicates the type of message; for free text messages, the subject is also displayed. The Originator
column identifies who sent the message. The OR column will return an acknowledgement message to the
sender when the receiver selects the appropriate response: Have Complied, Cant Comply, or Will Comply.
The A column indicates that the message contains an attachment by displaying a Y. This column is blank if
the message does not contain an attachment.
47
(4) To sort messages, select column heading. The messages are sorted and displayed in descending
order. Select column heading again to display in ascending order.
m. Access Warning messages:
NOTE: Ensure that an unresolved Warning/Alert message has been created prior to this procedure.
(1) When the system receives potential life threatening warning messages and/or system alerts, the
Warnings Marquee, located adjacent to the classification banner at the top of the OPS main screen, displays
the number of unresolved warning messages and system alerts. The number of unresolved warning
messages (W) and system alerts (A) is indicated by numbers in parentheses in the marquee.
(2) Select Warnings Marquee on OPS main screen. Warning and Alerts scrolling marquee opens.
(3) Selecting the Warning Marquee will open the scroll window if it is not opened and will close the scroll
window if it is open.
NOTE: The scrolling marquee only appears if there are unresolved Warning messages or System Alerts.
The marquee is divided into 2 columns and 2 rows (one row for Warning messages and another row for
System Alert messages). The first column lists the warning types (i.e., Warnings and System Alerts), and the
second column displays and scrolls through each unresolved warning and system alert according to the
scroll rate setting. All warnings and alerts will display continually in the scroll window until they are resolved.
(4) Explain what causes a warning message and list several safety radius limits.
Safety Radius:
Message Type
(in meters)
NBC1
Chemical
500m
Obstacle/NBC1
Biological
500m
Obstacle/NBC1/STRIKE WARN
Nuclear
1000m
Enemy Buildings
1500m
Enemy Equipment
4000m
1500m
Obstacle Report
Minefield Anti-Tank
500m
Striking Warning
Conventional
1000m
Threat Warning
Anti-Aircraft Artillery
4000m
NOTE: The Warnings tab displays a listing of unresolved Warning messages. It includes the Title, DTG, and
Originator for each message listed.
(5) To update list to reflect any new incoming messages, select Refresh.
SCENARIO: Due to the poor FM communications area you are traveling in, you begin to receive several
messages from the convoy commander and FOB Fenty which you must process.
Show Slide 50 (Access received messages)
n. Access received messages:
NOTE: Send a Free Text message, which requires an OR, to the class.
(1) The procedures outlined in this learning activity are identical for all four message precedences: Flash,
Immediate, Priority, and Routine.
(2) Select flashing FIPR message with plus (+) sign. .
NOTE: This enables the viewing and reading of all messages from the commander first. The Message Type
column only gives the type of message that is received, except for Free Text messages, which will have a
subject.
(3) Display Msg.
NOTE: A Y indicates a response is required; an R indicates response given; and a blank field indicates no
48
OR required.
o. Message Reply
(1) Select OR message.
(2) Select Compliance option: Will Comply.
NOTE: If Cant Comply is selected, select the reason for noncompliance using the Compliance Code dropdown arrow.
(3) Type response in Response text box. (50 character maximum)
NOTE: The operator response is noted in the Messages dialog boxs OR column as an R.
SCENARIO: You arrived at FOB Fenty and have begun conducting operations in the area. On todays
mission you have another platoon operating with you dismounted. You must send up position reports for
them on your BFT to ensure situational awareness for the TOC and other units.
Show Slide 51 (Position Report)
p. Create Position Report:
(1) A Position Report message is used to report friendly unit location data outside of the automated Blue
Force Tracking SA reporting process. It broadcasts a blue icon, from the loaded dataset onto the SA. This
message can be of critical importance with the limited fielding of FBCB2-BFT (JCR) in some units.
(2) Multiple blue icons, representing units within the dataset without a fully functioning system, can be
placed onto the SA with a single Position report. A Position report can be saved to a Quick Send button,
updated, and re-sent whenever necessary, which could be invaluable in the prevention of fratricide and
which gives a truer picture of the common operational picture (COP). This differs from a friendly Spot Report,
which places an unknown blue icon on the SA.
(3) To update a friendly position for platforms or roles in the dataset, prepare and send a Position Report.
A friendly SA message will display with the details of the platform reported. To update a friendly position for
platforms not in the dataset, prepare and send a friendly SPOT Report. An unknown blue icon will display on
the screen.
(4) In any given area of operations (AO), there can be non-digitized vehicles as well as deployed
dismounts. Use the Position Report and the SPOT Report to maintain the Common Operating Picture (COP)
for those elements that are not equipped to report digitally.
NOTE: When creating a Position Report, all text box labels bolded black with an asterisk are required fields
that must contain data. Also, the type of acknowledgment for this report cannot be selected, and the report
will not appear in recipient(s) Inbox. Instead, it moves the position icon to the newly reported position.
(5) Select Access Message Manager Dialog
(6) Select New Message.
(7) Select Reports
(8) Select Position Report
(9) Select Create Msg
(10) Select Unit option:
(a) Select criteria: Company: A-4-BN-6-IN
(b) Select 1-A-4-BN-6-IN in unit Matches area.
NOTE: The platform/unit designations that auto populate the Matches list can be limited to Top Units, as
applicable, by selecting Top Units. This list can also be limited by selecting the Platforms, Units, or All filter
option. In addition, all matches in list can be chosen by selecting Select All.
(11) If the correct match is not displayed, use the Search feature. Type all or part of the platform/unit
identifier in the Search text box in Lookup area and select Search.
49
50
(a) Chat Pane: The chat pane displays all the shared information from all members of that chat room.
The shared information includes when each member enters, leaves, and each message sent. Each invitation
sent will also be displayed in the chat pane. The action a role takes in response to the invitation is also
displayed in the chat pane.
(b) Members List Pane: Displays a list of all roles that have been invited to that chat room. All
invitees will be listed in the members list pane. Each invitee will be displayed according to the following:
1 Members that have accepted an invitation will be displayed in black font at the top of the list.
2 Roles that have not accepted an invitation will be displayed in red font at the bottom of the list.
NOTE: Roles that have rejected an invitation will not be displayed.
(c) Text box: Type a message in the text box.
(d) Leave: Select Leave to leave that chat room.
(e) Invite: Invite other members from the established buddy list. If an invitation is not accepted by a
role, it still counts against the allowed sixteen participants until rejected.
s. Create a buddy list:
(1) Select the Buddy List tab.
(2) Select Modify Buddy List. Buddy List dialog box opens.
(3) Select Add. Select Platform dialog box opens.
(4) Select role(s) to be entered on the buddy list from the Select Platform dialog box.
NOTE: To delete a role from the buddy list, highlight the role to delete and select Remove.
(5) Select OK. The selected role(s) will be added to the Buddy List dialog box.
(6) Select OK. Buddy list dialog box closes and Status, Name and Alias display for all buddy roles.
t. Create a chat room:
(1) Select the Chat Rooms tab on the Chat Manager dialog box.
(2) Select New Room. New Chat Room dialog box opens.
(3) Enter a unique name for the chat room.
NOTE: Chat Room names are limited to 16 characters and can be letters, numbers and periods only.
(4) Select OK. The new tab will display the name of the chat room. The name of the chat room and the
creators role will be displayed in the Active Rooms pane on the Chat Rooms tab.
u. Invite roles to a chat room.
(1) Select the tab for a chat room that you created.
(2) Select Invite. The Message Addressing dialog box will open.
(3) Select the Message Addressees tab.
(4) Select Master Addressee. Select Platform dialog box opens.
(5) Select role(s) to invite to chat room.
(6) Select OK. Roles display in the Message Addressee list pane.
(7) Select OK. The role will be listed in the member list pane, and an invite will be displayed in the
recipients Pending Invites pane, and the Chat button on the invitees OPS screen will flash.
v. Enter a Chat Room.
(1) Enter a Chat Room for the first time:
(a) Select Chat Rooms tab.
(b) Select the invite in the Pending Invites pane.
(c) Select Accept. The <name of chat room> tab will be displayed.
(d) Select the tab <name of chat room>.
(2) Re-Enter a Chat Room:
51
52
changing the color of the members' icons. It also allows direct messaging to the CPG leader.
(2) Select Apps from OPS main screen. Apps dialog box opens, displaying a list of applications.
(3) Select Convoy Patrol Group Manager in list of applications.
(4) Select Execute. CPG Manager Dialog dialog box opens.
bb. Create Convoy Patrol Group:
(1) Select Create/Edit tab.
(2) Select Create New in CPG pane. Cursor moves to Name text box in CPG Info pane, and system
displays Creator information in same pane.
(3) Type RENEGADE PATROL 001 in Name text box in CPG Info pane.
NOTE: The Creator information that is displayed includes the Role and ID of the CPG creator. The CPG
creator is allowed to remove CPG members.
(4) Select NOW in Effective DTG text box.
(5) Type estimated expiration date and time of 2 hours past time indicated in Effective DTG text box in
Estimated Dissolution DTG text box.
NOTE: The Dissolution DTG is for estimation and planning purposes only. The CPG will remain active until it
is terminated by the user.
(6) A status indicator below the Estimated Dissolution DTG text box displays the current status of the
CPG. The three status indicators that appear after the CPG message is sent are (a) Active, (b) Pending, and
(c) Overdue. These indicators are based on the Effective DTG:
(a) Active: CPG has been saved and effective DTG has elapsed.
(b) Pending: Effective DTG has not passed.
(c) Overdue: CPG has not been sent and effective DTG has elapsed.
cc. Select units for convoy:
(1) A CPGC is created by assigning units from the Unit Task Organization (UTO) tree (left side of pane)
and adding them to the CPG Member area (right side of pane). To select a role from the tree, drill-down to
open the appropriate folder.
(2) Select :4ID > 4-BCT-1-AD >4-BN-6-IN > A-4-BN-6-IN > 1-A-4-BN-6-IN > CDR-A-4-BN6IN4BCT1AD from UTO tree to add yourself to the CPG. Add >> function is activated.
(3) Select Add >>. You are added to CPG member area.
NOTE: A unit can be removed from the CPG member area in the same manner by selecting the unit for
removal in the CPG member area and selecting << Remove.
(4) Repeat steps c(1) and c(2) to add the 1st Platoon Leader as well as 1st and 2nd Squads to the CPG
(using the same folder path:
(a) PL-1-A-4-BN6IN-4BCT1AD
(b) SQD1-1-A-4-BN6IN-4BCT1AD
(c) SQD2-1-A-4-BN6IN-4BCT1AD.)
(5) Select PL-1-A-4-BN6IN-4BCT1AD in CPG Member area to assign the Platoon Leader as convoy
leader.
(6) Select Set Leader. System displays PL-1-A-4-BN6IN-4BCT1AD as new convoy leader in Leader
area of CPG Info pane.
NOTE: The convoy leader can also be selected from the UTO tree. When Set Leader is selected, the system
moves the selected role in the UTO tree to the CPG member area. To assign a new leader, select the
desired role and select Set Leader. The updated leader name appears in the CPG Info pane above.
(7) Select CDR-A-4-BN6IN-4BCT1AD in CPG member area to assign a convoy monitor.
53
(8) Select Set Monitor. System places an asterisk before CDR-A-4-BN6IN-4BCT1AD to indicate you
will serve as convoy monitor.
(9) To change the convoy monitor, select the current monitor in the CPG member area and Select Set
Monitor. The asterisk before the selected monitor is removed. Select the appropriate role in the CPG
member area and again select Set Monitor. An asterisk is placed before selected role to indicate that it will
serve as convoy monitor.
NOTE: A convoy can only have one leader, but it can have more than one monitor.
dd. Send message to convoy members:
(1) Once you have completed the CPG Dialog Box and assigned the Leader and Monitor, activate the
convoy by selecting Send.
(2) Select Send. Addressee Availability dialog box may open with the members of the CPG displayed
as addressees.
(3) Select Send. Addressee Availability dialog box closes. CPG Manager Dialog dialog box reappears.
ee. Monitor Convoy Patrol Group(s):
NOTE: The Monitor tab displays the CPG Summary Info that provides a listing of all CPGs that the user is a
part of, the user is the creator of, or the user has been assigned to monitor. The information provided in the
table includes the convoy color, the convoy name, the convoy status, the start DTG, the assigned leader,
and the associated alias, if applicable.
(1) The Convoy Color feature is used to assign the local color setting for the selected CPG. When a
convoy color is assigned, the CPG map icons will be highlighted with the local color setting assigned through
this feature for quick identification of CPG members on the map display.
(2) Ensure CPG Manager Dialog dialog box is open.
(3) Select Monitor tab.
(4) Set convoy color:
(a) Select active CPG in CPG Summary Info table.
NOTE: Convoy icon color can only be assigned to active CPGs.
(b) Select Convoy Color option.
(c) Select Apply. Selected color displays in Convoy Color column of table, and CPG map icons are
highlighted with selected color.
(d) Verify color was updated on SA Map background.
NOTE: Set the Convoy Color option to None to remove the color setting.
(5) Center on Leader:
NOTE: When selected, the Center on Leader feature centers the map display to the leader of a selected
CPG.
(a) Select convoy in CPG Summary Info table.
(b) Select Center-On Leader. Map display centers to selected convoys leader.
(6) Update CPG Summary Info table:
(a) Select Refresh. The list of CPGs is updated to accommodate changes from incoming messages,
if applicable.
(b) Select Close. The CPG Manager Dialog dialog box closes and the convoy is active.
ff. Terminate Convoy Patrol Group setting
(1) Select Apps from OPS main screen. Apps dialog box opens, displaying a list of applications.
(2) Select Convoy Patrol Group Manager in list of applications.
(3) Select Execute. CPG Manager Dialog dialog box opens.
54
55
strategic and tactical uses for this tool. The Circular Line of Sight (CLOS) feature can be used to quickly
determine line-of-sight and dead-space 360 degrees around a point selected on the map screen for a
determined radius.
(1) The CLOS tool function uses terrain elevation data and does not take into account vegetation or
man-made structures
(2) The CLOS tool is limited in its application; therefore, it should not replace a detailed map
reconnaissance. One of the limitations is that the shaded area is based strictly on the observers elevation.
The algorithm used to calculate what is visible assumes a flat LOS trajectory and does not take into account
that the observer can possibly see what is at a higher or lower elevation. For example, an observer is on a
hilltop, which is 800 meters in elevation looking across a valley to a ridgeline that is 1200 meters in elevation.
The CLOS tool only portrays LOS 800 meters up the distant ridgeline. The remaining 400 meters in elevation
displays as a shaded area of the Circular LOS, thus presenting an incomplete picture.
(3) This illustration may be helpful in explaining this CLOS limitation, and it is applicable to LOS
limitations as well.
(4) Multiple CLOS range fans may be developed and displayed. The system uses the color black for the
center point and range fan for those CLOS not currently being edited, but the shaded colors remain the
same.
(5) Ensure OPS main screen is displayed.
(6) Select Apps from OPS main screen. Apps dialog box opens.
(7) Select Circular Line of Sight (CLOS) from list of applications.
(8) Select Execute. CLOS Dialog dialog box opens.
56
Check on Learning:
Check on learning:
1. What function button(s) access the messaging function?
Answer: F3 - Combat Messages or F4 Messages
2. What does FIPR stand for and what is its function?
Answer: Flash, Immediate, Priority, and Routine (FIPR); displays the
number of received messages by precedence.
3. What is The Convoy Patrol Group (CPG)?
Answer: a flexible grouping function that allows vehicles to observe
other vehicles in your convoy or patrol movements during a combat or
resupply mission.
Review Summary:
TLO - LSA 6.
Method of Instruction:
Instr Type(I:S Ratio/Qty):
Time of Instruction:
Instructional Strategy:
Media Type:
Other Media:
Security Classification:
a. Explanation to students.
(1) Ask check questions throughout the practical exercise.
(2) Prepare shop training area prior to class
(3) Use the solution sheet to track each students progress during the practical exercise.
(4) If a student completes all the requirements of the practical exercise by the allotted time, assign
additional tasks that reinforce learning activity.
(5) All students must complete the requirements of the practical exercise in allotted time.
57
(6) During this PE, you will practice operational functions on the FBCB2 JCR system.
(7) Do you have any questions pertaining to this PE?
(8) If you have no (more) questions, you may start your exercise by following the directions on your PE.
b. Application by students.
(1) Perform the required tasks.
(2) Notify instruction upon completion.
c. Evaluation. During the latter part of the PE evaluate each student to ensure they have the ability to
operate the FBCB2 JCR System.
Check on Learning:
Review Summary:
TLO - LSA 7.
Method of Instruction:
Instr Type(I:S Ratio/Qty):
Time of Instruction:
Instructional Strategy:
Media Type:
Other Media:
Security Classification:
Conference/Demonstration
Signal instructor(1:16/0)
0 hrs 25 mins
Large Group Instruction
Actual Equipment
Unassigned
This course/lesson will present information that has a
Security Classification of: U - Unclassified.
58
(3) Commander, Security Officer (SO), or Information Assurance (IA) officer must appoint authorized
individuals (Operator/FSR), in writing, who can write data from FBCB2 systems to a SecureMDL. A list of
authorized personnel will be maintained for accountability by the Security Officer. The Operator/FSR must
sign a copy of the procedures to acknowledge responsibility for following the handling procedures correctly.
Show Slide 62 (SecureMDL Security Procedures) Contd
(4) To write data, the authorized individual takes the SecureMDL to a designated FBCB2 system to
perform the write operation. The authorized individual must have a second cleared individual to witness the
operation and verify that the specific files are written to the SecureMDL.
59
(14) Select Continue. First Security Officer Applications dialog box closes and second Security Officer
Applications dialog box opens.
(15) Use the > button on the top right to scroll the tabs until SecureMDL Mgmt tab is displayed.
(16) Select Initialize Initialize SecureMDL Device dialog box opens.
(17) Enter a password (8 characters minimum) into the Enter Password text box.
(18) Enter the same password into the Confirm Password text box.
(19) Select OK. A second Initialize SecureMDL Device dialog box displays message: The SecureMDL
Device has successfully been initialized.
(20) Select OK. Initialize SecureMDL Device dialog boxes close.
(21) Select Close. Security Officer Applications dialog box closes.
(22) Disconnect the SecureMDL Device.
(23) Connect keyboard cable through J2 connection on the DU.
d. Change Password for the Secure MDL
(1) Disconnect keyboard cable from J2 connection on the DU.
(2) Connect SecureMDL to the JCR system through the J2 connection on the DU.
(3) Select Start > FBCB2 > Security. Security Officer Applications password dialog box opens.
(4) Select fbcbsecur.
(5) Type in appropriate password in the Enter Password text box.
(6) Select Continue. First Security Officer Applications dialog box closes and second Security Officer
Applications dialog box opens.
(7) Use the > button on the top right to scroll the tabs until SecureMDL Mgmt tab is displayed.
(8) Select Change Password Change SecureMDL Device Password dialog box opens.
(9) Enter Current password into Current Password text box.
(10) Enter a new password (8 characters minimum) into the New Password text box.
(11) Enter the same password into the Confirm Password text box.
(12) Select OK. A second Change SecureMDL Device Password dialog box displays message: The
Password Change was successful.
(13) Select OK. Change SecureMDL Device Password dialog boxes close.
(14) Select Close. Security Officer Applications dialog box closes.
(15) Disconnect the SecureMDL Device.
(16) Connect keyboard cable through J2 connection on the DU
e. Create an Open Office Document:
(1) Select Start > Open Office > Text Document. A new Open Office document opens.
(2) Create file.
NOTE: This might be used to create a patrol log for daily use.
f. Save file:
(1) Select File > Save As. Save As dialog box opens.
(2) Type desired name of file.
(3) Select Save. Save As dialog box closes.
(4) Select File > Exit. Text document closes.
g. Export an Open Office Document from JCR Vehicle:
(1) Disconnect keyboard cable from J2 connection on the DU.
(2) Connect SecureMDL to the JCR system through the J2 connection on the DU.
60
(3) Select Start > FBCB2 > PFF Management. Personal File Folder Manager dialog box opens.
(4) Select SecureMDL Device from the Destination Pane by quickly double tapping SecureMDL Device
from the directory. Enter SecureMDL Device Password dialog box opens.
(6) Select OK. System performs a virus scan, 'Enter SecureMDL Device Password' dialog box closes
and displays files in the directory tree under the SecureMDL Device Folder.
(8) Verify SecureMDL Device from the Destination Pane is still selected.
(10) Select Close. Personal File Folder Manager dialog box closes.
NOTE: Operators should exchange SecureMDL devices at this time to perform this procedure.
(2) Connect SecureMDL to the JCR system through the J2 connection on the DU.
(3) Select Start > FBCB2 > PFF Management. Personal File Folder Manager dialog box opens.
(4) Select SecureMDL Device from the Source Pane by quickly double tapping SecureMDL Device from
the directory. Enter SecureMDL Device Password dialog box opens.
(6) Select OK. System performs a virus scan, 'Enter SecureMDL Device Password' dialog box closes
and displays files in the directory tree under the SecureMDL Device Folder.
61
NOTE: Imported files must be opened using the appropriate Open Office application.
(10) Select Close. Personal File Folder Manager dialog box closes.
NOTE: Soldiers should perform all of the procedures in this LSA on their system. Ensure that messages
have been saved and sent and data is available when the Soldiers create a message Mission Data Set.
i. Re-initialize SecureMDL:
(2) Connect SecureMDL to the JCR system through the J2 connection on the DU.
(3) Select Start > FBCB2 > Mission Data Load > Mission Data Loader. Mission Data Loader Dialog
box opens.
(5) Select SecureMdlDevice from Copy From Source option. Enter SecureMDL Device Password
dialog box opens.
(6) Enter a known incorrect password in the Enter Password text field.
(7) Select OK. SecureMDL Device Password dialog box displays "If found, please return to: 'user
information.' Incorrect password entered. Please try again.
(9) Enter a known incorrect password in the Enter Password text field.
(10) Select OK. SecureMDL Device Password dialog box displays "If found, please return to: 'user
information.' Incorrect password entered. (X) remaining attempts before your IronKey resets and all its data
is permanently lost."
NOTE: The number of remaining attempts will be displayed where the (X) is located in the message.
62
(12) Enter a known incorrect password in the Enter Password text field.
(13) Select OK. SecureMDL Device Password dialog box displays "If found, please return to: 'user
information.' Incorrect password entered. Please try again. For security purposes, you must physically
unplug your IronKey from your computer before trying again."
NOTE: This note will appear after every third incorrect attempt.
(16) Connect SecureMDL to the JCR system through the J2 connection on the DU.
(17) Repeat steps 4 through 15, as necessary, until known incorrect password has been entered 11
times.
(18) Enter a known incorrect password in the Enter Password text field.
(19) Select OK. SecureMDL Device Password dialog box displays "Incorrect password has been
entered 11 consecutive times. The device has been reset and must be initialized before use. Please ask
the Security Officer to initialize it."
(22) Select Start > FBCB2 > Security. Security Officer Applications Dialog box opens.
NOTE: If teaching the Operator or Maintainer you must enter the Security Officer password for the student.
(25) Select Continue. Security Officer Application Dialog box closes and reopens.
(26) Select right arrow at top of screen to scroll tabs to SecureMDL Mgmt tab.
63
NOTE: Password is case sensitive, must be 8 characters long and can be alpha-numeric.
(30) Select OK. A second Initialize SecureMDL Device Dialog box opens and displays the message "The
SecureMDL Device has successfully been initialized."
(31) Select OK. Both Initialize SecureMDL Device dialog boxes close.
(34) You must be familiar with and follow Information Security, Physical Security, Personnel Security,
and Key Safeguarding principles.
(35) IA is the process of ensuring that authorized users have access to authorized information at the
authorized time. AR 25-2 establishes responsibilities, policies, and procedures for assuring information
security across FBCB2-BFT and FBCB2-EPLRS network.
(1) AR 380-5 establishes the policy for classification, downgrading, declassification, and safeguarding of
information requiring protection in the interest of national security.
k. Personnel Responsibilities:
(1) You must maintain accountability of classified documents and media in your possession at all times.
You are accountable for all FBCB2-BFT (JCR) system components and should immediately report any
missing or destroyed system components to the Chain of Command. S2 Security Officer must verify the
users of Secret mission data have appropriate security clearances and are authorized to access the
classified information IAW AR 380-5.
(1) An unkeyed KGV-72 PED is a Controlled Cryptographic Item (CCI) and must be safeguarded,
shipped, stored, handled, and reported IAW DA Pamphlets 380-5, 25-380-2 and AR 380-40.
64
(2) Once a KGV-72 PED is installed to a system and the system classification is changed to SECRET,
the system cannot connect again to the Unclassified BFT Network.
(3) You must be cleared with the appropriate SECRET clearance in order to load operational keys on
the KGV-72 PED. The KGV-72 PED encrypts/decrypts FBCB2-BFT data. Load, handle, and safeguard the
keys for the KGV-72 PED IAW DA Pamphlet 25-380-2 and AR 380-40. Properly cleared personnel must
safeguard sensitive and classified information IAW AR 380-5, AR 190-13 and AR 25-2.
(1) Destruction of Army electronics materiel to prevent enemy use shall be in accordance with Technical
Manual 750-244-2.
(2) Once a FBCB2 (JCR) system possesses the SECRET classification banner, the HDD is now
classified SECRET. In order to declassify the HDD, an approved purge station must be utilized.
SCENARIO: During operation Regulars Strike you receive reports of the enemy attempting to gather
intelligence on the FBCB2-BFT by taking photographs of the screen and actually acquiring a system by
capturing a platform. You must be prepared to safeguard your system by using the screen lock feature,
responding to authentication and if necessary zeroize or destroy the system.
SCENARIO: You must dismount your vehicle and leave your system unattended for a few moments.
Activate and deactivate the screen lock function.
(1) When the screen lock is activated, the system maintains the current users logged in operational
status in the background, displays a Screen Lock login dialog box, denies access to an unauthorized user,
and allows the user to log back in or to logout. It should be activated any time the Soldier needs to leave the
immediate area and is out of sight of the DU. It can be activated from any screen.
NOTE: If the logout option is chosen, the system will allow a new user to login. If the user logs back in, the
system immediately resumes operations.
(1) The Screen Lock login dialog box can be activated by the user from any screen. To deactivate the
screen lock, the user will need to log back into the system using the login screen.
65
NOTE: If an unsuccessful login attempt is made, a warning message displays the message: Bad
password entered! If three unsuccessful login attempts are made, a warning dialog box displays the
message: "Number of login attempts exceeded. Please contact your security officer. Login aborted." Should
this happen, screen will lock up and no more login attempts will be allowed. You can log out and attempt to
login in again or contact the Security Officer.
SCENARIO: During Operation Regulars Strike you receive an authentication without lockout message.
Respond to the message.
(1) The operator has the choice to authenticate or to cancel a re-authentication request if it is sent
without lockout. An authentication success message is sent back to the Tactical Operations Center (TOC). If
the operator is in the middle of a battle or cannot authenticate for some other reason, the operator can select
the CANCEL button. This will send a message back to the TOC that the authentication request was
cancelled. If the operator does not press either button within 10 minutes, the Re-Authentication Required
screen will close, and the platform can continue to operate. The FIPR application stores the flash message
that initiated the alert.
(2) When a Re-authentication Without Lockout message is received, an alert tone sounds and the ReAuthentication Required screen displays.
(1) If the TOC suspects a unit may have been compromised, it can send an authentication request
message with lockout to that platform. An alert tone sounds and the Re-authentication Required screen
displays. The CANCEL button will be removed, and the platform will have to authenticate or face having their
FBCB2-BFT system remotely disabled.
(2) To authenticate, the operator must enter a valid unit or individual password and then select the
AUTHENTICATE button. An authentication success message will be sent to the Tactical Operations Center.
The operator should also contact the TOC as soon as possible by FM radio or other means.
(3) If the operator does not respond within 10 minutes, the dialog box closes and the platform is locked
out of the FBCB2-BFT system.
66
SCENARIO: Your vehicle is severely damaged during Operation Regulars Strike and must be left behind
with ISAF personnel left guarding it. Zeroize the KGV-72 PED.
(1) There are two methods in which to zeroize the KGV-72 PED, one using the KGV-72 PED equipment
and the other method using the PED Manager JCR software.
(2) Zeroize removes all encryption keys and deletes all system presets and configuration settings to
default values. Encryption/decryption operations are not possible until encryption keys are reloaded.
CAUTION: Accidental use of Zeroize may make the KGV-72 PED device inoperable for mission
requirements.
(3) Lift up and turn Mode Switch to Z position. KGV-72 PED device will immediately begin to zeroize all
operational keys.
NOTE: If the mode switch is moved to Z while the KGV-72 PED device has no power source connected to
the Power port, the device will zeroize the next time it is powered on.
(1) Select Start > Platform Encryption Device Manager. PED Manager dialog box opens.
(2) Select Advanced. PED Manager Advanced Tools dialog box opens.
(3) Select Zeroize Operational Keys. Confirm Zeroize Keys dialog box opens. You must confirm that
you want to zeroize the operational keys. Do you want to continue?
(4) Select Continue. Time remaining dialog box opens. Operational key countdown begins with a
countdown timer that displays the remaining time. Two options are now available: NOW and CANCEL. Allow
the countdown to continue or select NOW. Zeroize PED dialog box opens to confirm the PED has been
zeroized.
SCENARIO: Your vehicle is severely damaged during Operation Regulars Strike and must be left behind
with ISAF personnel left guarding it. Zeroize the keys on the satellite transceiver.
67
(1) This action will delete the satellite transceiver's transmission encryption key. The Satellite
Transceiver's transmission key must be zeroized if the security of the communications network is in danger
of being compromised.
NOTE: Explain that with a KGV-72 PED there is limited functionality for the operator on the Transceiver
Management Tool such as Show Info and Advanced functions.
(2) Select Start > Transceiver Manager. Transceiver Manager Tools dialog box opens. The transceiver
serial number and current security state are displayed in the third paragraph of text in the dialog box.
NOTE: Once selected, Initializing warning message opens. Once initialization has occurred, access to the
Transceiver Manager Tools dialog box is provided. If the initialization was not successful, a second
message, the Transceiver Manager Initialization dialog box appears. The initialization issue will need to be
corrected to continue. Select OK to close the message.
(3) Record Satellite Transceiver serial number as displayed in Transceiver Manager Tools dialog box.
(4) Select Advanced. Transceiver Manager Advanced Tools dialog box opens with only four options:
Zeroize Transceiver, Set Transmit Inhibited (Aviation Only), Close, and Help.
(5) Select Zeroize Transceiver. Confirm Zeroize Transceiver dialog box displays the message "You
must confirm that you want to zeroize the transceiver. Do you want to continue?"
(6) Select Continue. Time Remaining dialog box displays the message: Transceiver [serial number] will
be zeroized in ..." A countdown timer completes the sentence and displays the remaining time. Two options
are now available: NOW and CANCEL.
(7) Allow countdown to complete, or select NOW to stop timeout and immediately zeroize Satellite
transceiver. Time Remaining dialog box closes.
(9) Select Close. Transceiver Manager Advanced Tools dialog box closes.
SCENARIO: Your vehicle is severely damaged during Operation Regulars Strike and must be left behind
with ISAF personnel left guarding it. Zeroize the DAGR.
68
NOTE: DO NOT ALLOW THE STUDENTS TO PHYSICALLY ENABLE THE DESTROY FBCB2
FUNCTIONS DURING THIS CONFERENCE.
(1) Destroy makes the system inoperable and should be used if the KGV-72 PED is in IMMINENT
danger of being captured by the enemy.
CAUTION: There is no field method to restore a destroyed KGV-72 PED. It must be returned to the
Electronic Maintenance Facility (ELM).
(2) Select Start > Platform Encryption Device Manager. PED Manager dialog box opens.
(3) Select Advanced. PED Manager Advanced Tools dialog box opens.
(4) Select Destroy PED. Confirm Destroy dialog box opens. Warning!! You must confirm that you want
to destroy the Platform Encryption Device. This action is not recoverable. Do you want to continue?
(5) Select Continue. Time Remaining dialog box opens with the message: Platform Encryption Device
[Serial Number} will be destroyed in..." A countdown timer completes the sentence and displays the
remaining time. Two options are now available: NOW and CANCEL. Allow the countdown to continue or
select NOW. PED Keys are destroyed.
SCENARIO: Your vehicle is severely damaged during Operation Regulars Strike and must be left behind
with no one guarding it. Destroy the AN/UYK-128(V)3 computer system.
NOTE: The Destroy System function disables the systems ability to operate. All processes are immediately
stopped and the following actions occur:
(2) The satellite transceiver and KGV_72 PED firmware, and RHDDC are overwritten.
NOTE: There are 15 seconds to cancel the destroy procedure. There is an active Countdown field on the
System Disable Countdown dialog box.
NOTE: DO NOT ALLOW THE STUDENTS TO PHYSICALLY ENABLE THE DESTROY FBCB2
FUNCTIONS DURING THIS CONFERENCE.
Check on Learning:
Check on learning:
1. What are the primary components of a SecureMission Data Loader
(MDL)?
69
Answer: A COTS USB flash drive with Iron Key and an adapter
2. How many times can an incorrect password be entered before a
SecureMDL is reset?
Answer: 11
Review Summary:
TLO - LSA 8.
Learning Step / Activity TLO - LSA 8. Mission Data Loader and Security
Functions PE
Method of Instruction:
Instr Type(I:S Ratio/Qty):
Time of Instruction:
Instructional Strategy:
Media Type:
Other Media:
Security Classification:
a. Explanation to student.
(1) During this practical exercise you will demonstrate your ability to perform various security procedures.
(2) When you feel confident that you have met the standard, ask your instructor to evaluate your
performance.
(3) Do you have any questions pertaining to this PE?
(4) If you have no (more) questions, you may start the PE.
b. Application by student.
(1) Execute a Screen Lock.
(2) Zeroize the KGV-72 PED.
(3) Destroy the AN/UYK-128(V)3 computer system.
c. Evaluation - During the practical exercise, evaluate each student to ensure they have the ability to
perform the required operations under the conditions and to the standard specified in the learning objective.
NOTE: The standard is met when all deficiencies are corrected IAW TM 11-7010-326-20, all shortcomings
are documented, or if the equipment has a major deficiency beyond unit maintenance level, it is evacuated
to a higher maintenance level.
Check on Learning:
Review Summary:
Conference/Discussion
Signal instructor (1:16/0)
5 mins
Large Group Instruction
Determine if the students have learned the material presented by soliciting student questions and explanations. Ask the
students questions and correct misunderstandings.
Review/
Summary
During this lesson you have demonstrated the ability to operate the FBCB2 JCR System. In doing so, we initalized the
FBCB2 for operation and identified functional screen components and user functionalities. You wer introduced to the
Secure Mission Data Loader and Security functions. Do you have any questions?
71
NOTE: The student will complete a hands-on examination to evaluate knowledge in 11325U1B15. Refer student to the Individual Student Assessment Plan.
Feedback
Requirements
72
Media Name
None
A-1
Media Type
B-1
Title
Identify Functional Areas and Components of the Digital Battlefield and FBCB2
PE
Lesson
Number/Title
Security Classification
Unclassified
Introduction
Motivator
During this practical exercise, you will demonstrate your ability to perform operational procedures for FBCB2.
The FBCB2 System is deployed down to company level and uses the tactical internet as its transport. As a Signal
Support System Specialist, you will be responsible for maintenance of the equipment that comprises the FBCB2
system, your knowledge and understanding of this system will ensure that your unit will continue to communicate in a
constantly changing Operating Environment (OE).
Terminal
Learning
Objective
NOTE. Inform the students of the following Terminal Learning Objective requirements.
At the completion of this lesson, you [the student] will:
Action:
Conditions:
Standards:
Install Force XXI Battle Command Brigade and Below (FBCB2) system for operation in
accordance with applicable technical manuals while maintaining OE awareness.
Safety
Requirements
Students will be reminded of the Army Safety Program and its relationship to their conduct and performance at all
times. All aspects of safety will be considered, to include equipment, electrical shock, wet floors, lifting and carrying
equipment, running up and down stairs, horseplay, or anything else that could result in death and/or injury. Handle,
use, store, and dispose of hazardous materials and hazardous waste (e.g., chemicals, cleaning solvents, contaminated
materials, etc.) in accordance with the Material Safety Data Sheets (MSDS), unit SOP requirements, and all federal,
state, local, and Army regulations.
Risk Assessment
Level
None
Environmental
Considerations
Evaluation
Performance examination 25U1B15 will be administered for this lesson. This examination will be conducted at the
conclusion of this lesson.
C-1
Instructional
Lead-in
During this practical exercise, you will demonstrate your ability to Perform Operational Procedures for FBCB2 Display
Process Screen. The knowledge you will acquire during this practical exercise will help you carry out those
responsibilities to the highest standards while maintaining OE awareness
Resource
Requirements
Instructor Materials:
1. FBCB2 hardware
2. TM 11-7010-326-10 and -20
3. Installation Kit
4. Multimeter AN/PSM-45(*)
5. TK-101/G
6. SB 11-131-2
7. DA-5988-E
8. Slides
Student Materials:
1. FBCB2 hardware
2. TM 11-7010-326-10 and -20
3. Installation Kit
4. Multimeter AN/PSM-45(*)
5. SB 11-131-2
6. DA-5988-E
Special
Instructions
NOTE: Before presenting this lesson, instructors must thoroughly prepare by studying this lesson and identified
reference material.
NOTE: The instructor must ensure training facilities, training devices, equipment and all other required resources are
available and operational prior to scheduled training.
NOTE: Inform students that they have 2 hours to complete this exercise.
NOTE: Inform students that they may use their notes and student handouts during the PE.
NOTE: Inform students when working with electronic equipment remember to obey all CAUTIONS, WARNINGS and
NOTES to prevent injuries to yourself and damage to equipment.
Procedures
C-2
_____GO_____NO/GO
3. Report your platform location manually:
a. Select SA tab.
b. Select Own subtab if applicable.
c. Select Manual from Reporting Mode pane.
d. Select Apply.
e. Select Platform tab.
f. Select Location subtab.
g. Select data entry method for Location using drop-down arrow. (i.e. 14R PV 20666 47811)
h. Select Quality option.
i. Type course, in degrees, in Course text box.
j. Type speed, in kilometers per hour, into Speed text box.
k. Type elevation, in feet, in Elevation text box.
l. Type altitude, in feet, in Altitude text box (when required).
m. Select Apply.
_____GO_____NO/GO
SHUT DOWN
_____GO_____NO/GO
PE2: FBCB2 OPERATIONS
Soldier Procedures: The following practical exercises test your knowledge of the procedures for creating and editing
reports and for processing messages.
1. You are preparing your FBCB2-BFT (JCR) for future combat operations. Create an Address Group and name it A
Company. Select the commander track, command post, and XO track from 1st CAV Div, 4th BCT, 2nd BN, 12th CAV,
A Company as the addressees.
_____GO_____NO/GO
2. Set your default message addressing for a SPOT report using the 2-12 CAV OCPOF Operations CP and S3 section.
_____GO_____NO/GO
3. You are about to leave the FOB for a mission when the platoon leaders wingmans FBCB2-BFT (JCR) system goes
down. Create a friendly position report, assign it to a quick send button, and name it POSR. Select the A company CP
as the default addressee. Select A company, 1st platoon, platoon leader wingman as the unit, and select Map in the
Unit Location tab. Select a location on the map screen near your present location.
_____GO_____NO/GO
4. While on a mounted patrol, your unit discovers an IED. Prepare an IED SPOT Report. The location is 42SXD 2663
1121. DTG is NOW, Affiliation is Hostile, and activity is stationary.
_____GO_____NO/GO
5. After moving out from the IED site your patrol encounters a minefield, south of the main route. Create an Obstacle
Report for the minefield. It is hostile, your unique designation is APACHE001, time is NOW, location grids are 42SXD
24916 10649, 42SXD 24958 10478, 42SXD 25097 10535, and 42SXD 25080 10692.
The minefield is active, consisting of anti-personnel mines designed to disrupt enemy movement. Follow-on units will
not be endangered if they stay on the prescribed route. Save your report as Obstacle_(your name). If there is no
REPORTS folder, create one as you save the message.
_____GO_____NO/GO
6. Send a Free Text message to the A company CP. Subject is RECON Status. Message is 1st platoon is REDCON
1.
C-3
_____GO_____NO/GO
Soldier Procedures: The following practical exercises test your knowledge of the various JCR navigation, line-of-sight,
and reporting applications.
1. You are preparing to conduct a mounted presence patrol. Create a Convoy Patrol Group with the following
information:
a. The name is CPG 001
b. DTG is NOW, set the dissolution DTG for one hour later
c. Your unit is 1st platoon, A company, 2-12 CAV, 4th BCT, 1st Cav Div. Your convoy members will be the platoon
leader, the platoon leader wingman, and the platoon sergeant. Set yourself as the Leader and the platoon leader as the
Monitor.
_____GO_____NO/GO
2. Now you must create and send the route to your patrol (Land Route Report).
a. Create the route on your display map by entering the six points below:
(1) 42SXD 30782 10019
(2) 42SXD 28776 09618
(3) 42SXD 28645 10472
(4) 42SXD 28716 10685
(5) 42SXD 29489 11408
(6) 42SXD 29894 12057
(7) Create a folder called CPG. Save your route as CPG Route 001.
b. Send your route to the convoy members as well as the company CP.
_____GO_____NO/GO
Soldier Procedures: The following practical exercises test your knowledge of constructing overlays.
1. Your unit is preparing to conduct an offensive operation. You have been tasked to assist in creating a current
operational overlay. Create a boundary, two main supply routes (MSRs), and two phase lines.
a. Create an Overlay folder if one doesnt exist. Save your file as Overlay 001.
b. Hint: under 2525B select Tactical Graphics, C2 General Maneuver
c. The boundary points are:
(1) 42SXD 31316 11902
(2) 42SXD 29565 12158
(3) 42SXD 28486 11773
(4) 42SXD 27439 11636
(5) DTG is NOW and the unique designation is 2-12 CAV.
d. MSR Striker grids are:
(1) 42SXD 30774 10045
(2) 42SXD 29888 09738
(3) 42SXD 29660 09810
(4) 42SXD 28789 09593
(5) 42SXD 28732 10441
(6) 42SXD 27215 10982
(7) 42SXD 27456 11622
(8) DTG is NOW and the unique designation is STRIKER.
e. MSR Paladin grids are:
(1) 42SXD 28646 10495
C-4
Feedback
Requirements
NOTE: When you are finished, have an instructor verify your work.
NOTE: Secure all tools and equipment and wait for further guidance from you instructor.
C-5
SOLUTION FOR
PRACTICAL EXERCISE 113-25U1B12R PE1
PE1: Initialize the FBCB2 for Operation
Soldier Procedures: Soldier completed the start up procedures for the FBCB2-JCR, performed the listed actions, and shutdown procedures for the
system and the instructor verified that you have successfully completed the required procedures.
STARTUP
_____GO_____NO/GO
1. Verify Soldier set MEDEVAC Call Sign and Voice Net ID as:
a. MEDEVAC Requestor Call Sign: BlackJack6
b. Plain Text Voice Net ID: 55025
2. Verify Soldier changed Medevac Call Sign and Voice ID:
a. Ensure Admin dialog box is open.
b. Selected Platform tab.
c. Verified location data if automatically provided.
_____GO_____NO/GO
3. Verify Soldier reported platform location manually:
a. Selected SA tab.
b. Selected Own subtab if applicable.
c. Selected Manual from Reporting Mode pane.
d. Selected Apply.
e. Selected Platform tab.
f. Selected Location subtab.
g. Selected data entry method for Location using drop-down arrow. (i.e. 14R PV 20666 47811)
h. Selected Quality option.
i. Typed course, in degrees, in Course text box.
j. Typed speed, in kilometers per hour, into Speed text box.
k. Typed elevation, in feet, in Elevation text box.
l. Typed altitude, in feet, in Altitude text box (when required).
m. Selected Apply.
_____GO_____NO/GO
SHUT DOWN
_____GO_____NO/GO
PE2: FBCB2 OPERATIONS
Soldier Procedures: The following practical exercises test your knowledge of the procedures for creating and editing reports and for processing
messages.
1. You are preparing your FBCB2-BFT (JCR) for future combat operations. Verify Soldier created an Address Group and named it A Company.
Selected the commander track, command post, and XO track from 1st CAV Div, 4th BCT, 2nd BN, 12th CAV, A Company as the addressees.
_____GO_____NO/GO
2. Verify Soldier set the default message addressing for a SPOT report using the 2-12 CAV OCPOF Operations CP and S3 section.
_____GO_____NO/GO
3. You are about to leave the FOB for a mission when the platoon leaders wingmans FBCB2-BFT (JCR) system goes down. Verify Soldier created a
friendly position report, assigned it to a quick send button, and named it POSR. Select the A company CP as the default addressee. Selected A
company, 1st platoon, platoon leader wingman as the unit, and selected Map in the Unit Location tab. Selected a location on the map screen near
your present location.
C-6
_____GO_____NO/GO
4. While on a mounted patrol, your unit discovers an IED. Verify Soldier prepared an IED SPOT Report. The location is 42SXD 2663 1121. DTG is
NOW, Affiliation is Hostile, and activity is stationary.
_____GO_____NO/GO
5. After moving out from the IED site your patrol encounters a minefield, south of the main route. Verify Soldier created an Obstacle Report for the
minefield. It is hostile, your unique designation is APACHE001, time is NOW, location grids are 42SXD 24916 10649, 42SXD 24958 10478, 42SXD
25097 10535, and 42SXD 25080 10692.
The minefield is active, consisting of anti-personnel mines designed to disrupt enemy movement. Follow-on units will not be endangered if they stay
on the prescribed route. Verify Soldier saved the report as Obstacle_(your name). Verify Soldier created a "REPORTS" folder and saved the
message.
_____GO_____NO/GO
6. Verify Soldier sent a Free Text message to the A company CP. Subject is RECON Status. Message is 1st platoon is REDCON 1.
_____GO_____NO/GO
Soldier Procedures: The following practical exercises test your knowledge of the various JCR navigation, line-of-sight, and reporting applications.
1. You are preparing to conduct a mounted presence patrol. Verify Soldier created a Convoy Patrol Group with the following information:
a. The name is CPG 001
b. DTG is NOW, set the dissolution DTG for one hour later
c. Your unit is 1st platoon, A company, 2-12 CAV, 4th BCT, 1st Cav Div. Your convoy members will be the platoon leader, the platoon leader
wingman, and the platoon sergeant. Verify Soldier set themselves as the Leader and the platoon leader as the Monitor.
_____GO_____NO/GO
2. Verify Soldier created and sent the route to your patrol (Land Route Report).
a. Created the route on the display map by entering the six points below:
(1) 42SXD 30782 10019
(2) 42SXD 28776 09618
(3) 42SXD 28645 10472
(4) 42SXD 28716 10685
(5) 42SXD 29489 11408
(6) 42SXD 29894 12057
(7) Created a folder called CPG. Saved their route as CPG Route 001.
b. Sent the route to the convoy members as well as the company CP.
_____GO_____NO/GO
Soldier Procedures: The following practical exercises test your knowledge of constructing overlays.
1. Your unit is preparing to conduct an offensive operation. You have been tasked to assist in creating a current operational overlay. Verify Soldier
created a boundary, two main supply routes (MSRs), and two phase lines.
a. Created an Overlay folder if one doesnt exist. Saved the file as Overlay 001.
b. Hint: under 2525B select Tactical Graphics, C2 General Maneuver
c. The boundary points are:
(1) 42SXD 31316 11902
(2) 42SXD 29565 12158
(3) 42SXD 28486 11773
(4) 42SXD 27439 11636
(5) DTG is NOW and the unique designation is 2-12 CAV.
d. MSR Striker grids are:
(1) 42SXD 30774 10045
C-7
C-8
Media Name
None
D-1
Media Type