Professional Documents
Culture Documents
Mounting Accessories
Type 84...
85...
Probe
Magnetic base
with foil
Mounting Method
Magnetic base
Accessory Type
8400_000-281e-06.14
Probe
Adhesive mounting
base
Direct adhesive
mounting
Advantages
Disadvantages
Quick measurement
Lower accuracy
Isolated stud
mounting base
Stud mounting
Remarks
Magnetic base
Adds considerably to
mass loading, lowers
resonant frequency
Limited to ferromagnetic
materials
Adhesive mounting
base
8440K0x, 8466K01,
8434, 8436, 8438, ...
Adhesive wax
Limited temperature
range; not suitable for
larger sensors
Adhesive cement
Adhesive, Permabond
(cyanoacrylate), hot melt,
Epoxy
8400K0x
Control mounting
torque; use Silicone
grease
Mounting stud
Control mounting
torque; use Silicone
grease
Page 1/7
This information corresponds to the current state of knowledge. Kistler reserves
the right to make technical changes. Liability for consequential damage resulting
from the use of Kistler products is excluded.
2006 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
Kistler is a registered trademark of Kistler Holding AG.
Types 8402 ... 8453 are used to form a rigid connection between the accelerometer and the test object and are machined
from Beryllium Copper or Stainless Steel for high strength and
high modulus of elasticity coupled with high elastic limits. They
are available in different thread sizes; with English and Metric
threads at opposite ends or as a thread converting insert.
Caution: Always ensure that the stud does not contact the
bottom of the threaded hole. Always follow the recommended
mounting torque provided for each accelerometer in its corresponding instruction manual to prevent any damage to the
sensor base.
Mounting Studs
Type
THD. X
THD. Y
Material
8402
7,1
2,5
2,5
10-32
10-32
BeCu
8404
7,1
2,5
2,5
10-32
10-32
17-4 PH
8044
8406
5,8
2,0
2,0
10-32
10-32
BeCu
8076K
Type
THD. X
THD. Y
Material
8410
6,4
3,3
2,0
-28
10-32
BeCu
8411
10,4
6,6
2,8
M6
10-32
BeCu
8416
6,6
3,3
2,3
10-32
5-40
8763, 8766A250/500
8418
7,1
3,8
2,3
M6
5-40
8763, 8766A250/500
8421
12,2
7,5
3,0
M8
-28
BeCu
8203A, 8712A
8430K03
6,9
3,6
2,3
10-32
6-32
BeCu
8766A50, 8766A050/100
8451
8,8
5,1
2,8
M5
10-32
BeCu
8453
9,8
3,8
5,1
-28
M5
BeCu
8712
Stud Converters
8400_000-281e-06.14
Type
THD. X
THD. Y
Material
8414
9,5
8,1
-28
10-32
8076K, 8484
8414E
9,5
8,1
-28
M5
8484
5,5
3,4
10-32
5-40
8486
5,5
3,4
10-32
M3
Y (THD)
Type
THD. X
THD. Y
Material
8412
9,5
-28
Hex
8712A, 8076K
8763
8420
9,5
5-40
Hex
8414M03
8,9
-28
4-40
VascoMax 300
Page 2/7
This information corresponds to the current state of knowledge. Kistler reserves
the right to make technical changes. Liability for consequential damage resulting
from the use of Kistler products is excluded.
2006 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
Kistler is a registered trademark of Kistler Holding AG.
multiple locations are to be measured using only one accelerometer. Recommended mounting torque is provided in each
particular sensor data sheet or instruction manual.
Type
THD. X
Material
8434
4,8
12,4
11,2
5-40
Al. Anod.
8730, 8763
8436
4,8
15,7
14,2
10-32
Al. Anod.
8438
7,9
21,1
19,1
-28
Al. Anod.
8076K
Type
THD. X
Material
800M157
2,5
6,4
11,1
10-32
Al. Anod.
8688A
800M158
2,5
5,1
9,4
5-40
Al. Anod.
8640A
8440K01
5,2
8,0
12,7 Hex
5-40
Al. Anod.
8763A, 8766A250/500
8440K02
5,7
9,0
19,1 Hex
6-32
Al. Anod.
8766A50
C
A
8440K03
5,0
8,3
14,3 Hex
10-32
Al. Anod.
8440K04
5,0
8,3
15,7 Hex
6-32
Al. Anod.
8766A050/100
8466K01
6,4
10,2
22,2 Hex
10-32
Al. Anod.
8395A
Type
THD. X
THD. Y
Material
8400K01
3,4
11,6
12,7 Hex
10-32
10-32
Al. Anod.
8400K02
6,0
12,4
19,1 Hex
10-32
6-32
Al. Anod.
8766A50
8400K03
5,5
12,8
19,1 Hex
10-32
M6
Al. Anod.
8400K04
5,2
12,3
12,7 Hex
5-40
M6
Al. Anod.
8766A250/500, 8763
8400K05
5,9
13,3
19,1 Hex
6-32
M6
Al. Anod.
8766A50
8400K06
5,3
11,4
12,7 Hex
10-32
5-40
Al. Anod.
8766A250/A500, 8763
Type
THD. X
THD. Y
Material
8466K02
6,4
8,9
22,2 Hex
10-32
10-32
Al. Anod.
8395
X
A
C
Y
D
X
C
A
D
Y
B
8400_000-281e-06.14
Type
A (thickness)
THD. X
THD. Y
Material
8464K01
7,6
21,6
25,4
4-40
Al. Anod.
8315A
8464K02
7,6
21,6
25,4
4-40
10-32
Al. Anod.
8315A
Type
A (thickness)
Diam. X
Material
800M144
4,8
15,9
15,9
4-40
Al. Anod.
8793A, 8794A
X
C
Page 3/7
This information corresponds to the current state of knowledge. Kistler reserves
the right to make technical changes. Liability for consequential damage resulting
from the use of Kistler products is excluded.
2006 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
Kistler is a registered trademark of Kistler Holding AG.
Type
THD. X
Wt (grams)
Material
8502
25,4
25,4
25,4
25,4
10-32
117
8504
14,5
14,5
14,5
14,0
10-32
20
8506
28,7
28,7
28,7
29,2
-28
158
8203
8510
14,5
14,5
14,5
14,2
5-40
19
8730
8514
17,3
17,3
17,3
18,3
10-32
35
8524
11,2
11,2
11,2
10-32
2.8
Al. Anod.
8774A, 8274
8526
11,2
11,2
11,2
2.8
Al. Anod.
8776A, 8276
Type
THD. X
8522
26,9
26,9
26,9
15,0
4-40
Weight
Material
(grams)
Mounting
Screws
28
4-40 x 7/16"
Al. Anod.
8315A
Al. Anod.
8330B
Recommended
Sensor Types
A
10-32 x 1/2"
8530K01
39,6
39,6
39,6
25,4
4-40
74
4-40 x 7/16"
-28 x 1/2"
Type
A (thickness)
Diam. X
Diam. Y
Material
8466K04
4,6
25,4
43,9
3,2
5,2
Al. Anod.
A (thickness)
THD. X
THD. Y
Diam. Z
Material
8464K04
5,7
27,0
31,7
10-32
4-40
3,2
Al. Anod.
8400_000-281e-06.14
Type
8450A
7,6
12,7
11,2
THD. X
5-40
Y
C
X Z
Holding
Force
(N)
Weight
Max.
temp.
(C)
Material
(grams)
26,7
1,25
170
8763, 8730
8452A
11,2
17,8
15,9
10-32
55
19
260
KIG4662
B-4
10,9
18,0
12,7
10-32
55
17
80
St. Stl.
KIG4662
B-1
10,9
18,0
12,7
6-32
55
17
80
St. Stl.
8714B
KIG4662
B-5
9,9
11,9
9,9
M2.5
55
80
St. Stl.
8765, 8705
KIG4662
B-6
5,8
9,4
7,1
5-40
20
80
St. Stl.
8730, 8640
Page 4/7
2006 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
Kistler is a registered trademark of Kistler Holding AG.
THD. X
Holding
Force
(N)
Weight
Max.
temp.
(C)
Material
(grams)
8456
11,2
24,9
-28
135
57
170
17-4 PH
St. Stl.
8203
KIG4662
B-3
14,0
18,0
10-32
50
16
80
St. Stl.
8702, 8705
KIG4662
B-2
14,0
18,0
-28
50
16
80
St. Stl.
8752
B
Type
THD. X
Holding
Force (N)
Weight
102
8458
26,9
47,2
-28
180
Type
THD. X
8466K03
6,4
8,9
Type
THD. X
Material
(grams)
Holding
Force
(N)
Material
100
8395A
Holding
Force
(N)
Material
X
C
A
D
800M159
2,5
6,3
11,1
10-32
40
17-4 PH
St. Stl.
8688A
800M160
2,5
5,1
9,4
5-40
30
17-4 PH
St. Stl.
8640A
C
A
D
Type
A (thickness)
THD.X
Holding
Force (N)
Material
Recommended Sensor
Types
8464K03
7,6
21,6
25,4
4-40
100
17-4 PH
8315A
St. Stl.
A
B
8400_000-281e-06.14
Page 5/7
This information corresponds to the current state of knowledge. Kistler reserves
the right to make technical changes. Liability for consequential damage resulting
from the use of Kistler products is excluded.
2006 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
Kistler is a registered trademark of Kistler Holding AG.
Mounting Clips
Provide a convenient way to install single-axis, cube shaped
accelerometers on a test structure. Attached using adhesive,
they find use in large multichannel modal measurements.
Type
Material
8474
19,6
17,8
18,5
Engineering
thermoplastic
8772A
Type
Material
800M156
16,5
16,5
Polycarbonate
8640A
800M155
20,1
20,1
Polycarbonate
8688A
8400_000-281e-06.14
Page 6/7
This information corresponds to the current state of knowledge. Kistler reserves
the right to make technical changes. Liability for consequential damage resulting
from the use of Kistler products is excluded.
2006 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
Kistler is a registered trademark of Kistler Holding AG.
Adhesives
Mounting Area
Ambient Temperature
Availability
smooth,
polished
Room Temp.
Manufacturer
rough
Temperature Range
Solvent
Kistler
Temporary/Removeable
Synthetic wax/Petro wax
Not required
up to 150 C
up to 180 C
refer to manufacturer
instructions
Adhesive,
Henkel Teroson,
UHU GmbH
MEK (1)
refer to manufacturer
instructions
Adhesive,
Henkel Teroson,
UHU GmbH
MEK (1)
up to 65 C approx.
Adhesive,
Henkel Teroson,
UHU GmbH
up to 120 C approx.
Adhesive,
Henkel Teroson,
UHU GmbH
55 C ... 180 C
Fixed/Removeable/Permanent
Super glue, liquid
Permanent
Epoxy resin, 2 components
(1): MEK is the abbreviation for Methyl-ethyl-ketone. In order to ensure safe usage, please refer to the "Safety" data sheet mentioned in [3].
8400_000-281e-06.14
A (length)
1378
63,5
8778, 8278
Literature:
[1] Special print ref 20.305, "Acceleration Mounting Considerations," www.kistler.com
[2] Special print ref 20.407, "Frequency Response Limits for Low Impedance Accelerometers," www.kistler.com
[3] Safety data sheet according to Regulation (EC) No. 1907/2006, www.merckmillipore.com
Page 7/7
This information corresponds to the current state of knowledge. Kistler reserves
the right to make technical changes. Liability for consequential damage resulting
from the use of Kistler products is excluded.
2006 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
Kistler is a registered trademark of Kistler Holding AG.