You are on page 1of 7

REV.

Description

Date

S0

Release PVT

10/12/11

S1

1.Update Item 2.2 Load 1


2.Del Item 2.2 Load 9

11/09/11

00

Release P/M

12/05/11

DDCC-ChubgLi
Documeht is
released
2011.12.12
09:15:52
+08'00'

R
E
T
N
E
L
C IA
C NT
O
D DE
I
A
T NF
L
E
D CO

DESCRIPTION :

DELTA ELECTRONICS, INC. (Electrical Specification)


THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF DELTA
ELECTRONICS, INC. AND SHALL NOT BE REPRODUCED OR USED AS THE
BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES
WITHOUT PERMISSION.

Date

Drawn

Design (EE)

Design (ME)

12/05/11

File Name:

DF-PSLA4V-2R00.DOC

MODEL NO. :

DPS-200PB-176 C
DOCUMENT NAME. :

DPS-200PB-176 C
SHEET 1

REV.

00
OF 7

1. Input characteristics:
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9

Input voltage range: 90-264Vac, single phase.


Input normal voltage:100-240Vac.
Input frequency range: 47-63 Hz.
Input normal frequency: 50-60 Hz.
Max. Input AC current: 5Arms max. @ 115Vac ; 2.5Arms max. @230Vac full load.
Inrush current: At 90-265Vac, Max. Load condition Cold start & Hot start: no components damage.
Efficiency: 70% min. at input 220Vac and output full load.
Current harmonic: Meet EN61000-3-2 at 100Vac/50Hz or 230Vac/50Hz &input 75W to full load.
Power factor: PF0.9 during 110V& 220Vac/50Hz & full load.

2. Output characteristics:
2.1 Static output characteristics: (Table 1)

Output
voltage
+12V
+5V
+3.3V
+5VSB

R
E
T
N
E
L
C IA
C NT
O
D DE
I
A
T NF
L
E
D CO
Load range
Min.
Max.
0A
8A
0.3A
13A
0.3A
9A
0A
2A

Surge
10S
17A
28A
14A

Regulation
(%)
+5
- 5
+ 5
- 5
+ 5
- 5
+ 5
- 5

Ripple/Noise
120mV
50mV
50mV
50mV

Total maximum continue output power200W

Note: 1. Noise test: Noise bandwidth is from DC to 20MHz.

2. Add a 0.1uF capacitor in parallel with a 10uF tantalum capacitor at output connector
terminals for ripple & noise measurements.
3. Output voltage spec. is +/-10% during peak load.
2.2 Cross regulation load current is defined as follows:(Table 2)

DELTA ELECTRONICS, INC.


THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF DELTA
ELECTRONICS, INC. AND SHALL NOT BE REPRODUCED OR USED AS THE
BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES
WITHOUT PERMISSION.

Date

Drawn

Design (EE)

Design (ME)

12/05/11

File Name: DF-PSLA4V-2R00.DOC

DESCRIPTION:

(Electrical Specification)
MODEL NO.

DPS-200PB-176 C
REV.

DOCUMENT NO. :

ES-200PB-176 C
SHEET 2

00
OF

Load 0
Load 1
Load 2
Load 3
Load 4
Load 5
Load 6
Load 7
Load 8
Load 9
Load 10
Load 11
Load 12

+5V
0.3
0.5
0.3
0.3
10
13
5
28
5
0.3
10
1.5
6

+12V
0
0
8
1
6
8
17
5
5
0
0.25
0.25
10

+3.3V
0.3
8
0.3
9
2
9
5
5
14
8
2
10
2

5Vsb
0
0
0.2
0.2
0.2
2
1
1
1
0
0.2
0.2
0.2

R
E
T
N
E
L
C IA
C NT
O
D DE
I
A
T NF
L
E
D CO
Note: Load 6,7,8 is peak load.

2.3 Output characteristics:

2.3.1 Rise time: Any outputs rise from 10% to 90% of normal voltage should be within 0.1 to
20ms. and measured with CR mode or pure resistor.
2.3.2 Turn-on delay time: 500ms maximum at nominal line full load.(Remote on)
2.3.3 Hold up time: 8ms minimum for all outputs at 100Vac ,full load.
2.3.4 Overshoot: Any overshoot at turn on or turn off shall be less than 10% of the normal value.
2.4

Output dynamic load:


Output

De-coupling
Capacitors

+5V
+12V
+3.3V
+5Vsb

1000uF
1000uF
1000uF
350uF

Voltage limits. (V)


Max.
Min.
5.25
4.75
12.6
11.4
3.465
3.135
5.25
4.75

Load Change
30% Max. Load
50% Max. Load
30% Max. Load
10% Max. Load

Output voltages should remain within the regulation limits of section 2.1
Simultaneous load steps on the +12Vdc, +5Vdc, +3.3Vdc outputs.

DELTA ELECTRONICS, INC.


THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF DELTA
ELECTRONICS, INC. AND SHALL NOT BE REPRODUCED OR USED AS THE
BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES
WITHOUT PERMISSION.

Date

Drawn

Design (EE)

Design (ME)

12/05/11

File Name: DF-PSLA4V-2R00.DOC

DESCRIPTION:

(Electrical Specification)
MODEL NO.

DPS-200PB-176 C
REV.

DOCUMENT NO. :

ES-200PB-176 C
SHEET 3

00
OF

Load changing repetition rate of 1kHz to 10kHz, Slew rate: 0.1A/uS


AC input range at 90Vac~264Vac
3. Protections:
3.1 Over voltage protection: +5V: 6.5V max
+3.3V: 4.3V max
+12V: 15.6V max
+5Vsb: 6.5V max
3.2 Short circuit protection: A short circuit placed between DC return and output (Approximately 0.03
ohm) shall cause no damage and the main output shall shutdown and latch off, but only the +5VSB
shall recover automatically.
3.3 No load operation: No parts damaged on power supply.

R
E
T
N
E
L
C IA
C NT
O
D DE
I
A
T NF
L
E
D CO

3.4 The total power cant exceed 300W any time.


3.5 Over temperature protection: When operating conditions ambient exceeded rating, the Power
Supply shall shutdown and should recovered by AC/RC ON/OFF, if the fault condition is removed.
4. Production line test:

4.1 Dielectric withstand voltage: (10mA Cut-off current)


Primary to secondary: 1800Vac for 1 seconds.
Primary to safety ground: 1800Vac for 1 seconds.
4.2

Insulation resistance: Primary to safety ground: 500Vdc, 30M ohms min

4.3 Earth grounding test: 25A, 0.1 ohm maximum.

4.4 Leakage current: Shall not exceed 0.45mA /120Vac/60Hz and 0.75mA /240Vac/50Hz
5 Electromagnetic compatibility: .

a) Part 15, Sub-part J. Computing Devices Class B limits


b) CISPR22 Class B, 3DB margin.

6. Safety Requirement: This power supply is designed can meet the following spec.
a) TUV+CB
b) CCC

DELTA ELECTRONICS, INC.


THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF DELTA
ELECTRONICS, INC. AND SHALL NOT BE REPRODUCED OR USED AS THE
BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES
WITHOUT PERMISSION.

Date

Drawn

Design (EE)

Design (ME)

12/05/11

File Name: DF-PSLA4V-2R00.DOC

DESCRIPTION:

(Electrical Specification)
MODEL NO.

DPS-200PB-176 C
REV.

DOCUMENT NO. :

ES-200PB-176 C
SHEET 4

00
OF

c) CE
d) FCC
e) UL
f) CUL
g) C-TICK
h) PSE
i) BSMI
j) S-mark
7.

Environment:
7.1 Operating temperature: air temperature -10 to +55 .
7.2 PS-OFF operating temperature: air temperature +5 to +35

R
E
T
N
E
L
C IA
C NT
O
D DE
I
A
T NF
L
E
D CO

7.3 Operating relative humidity: 20% to 85% RH(non-condensing ).


7.4 Storage temperature: air temperature -20 to 70.

7.5 Storage relative humidity: 5% to 90% RH(non-condensing).

7.6 Altitude: operate properly at any altitude between 0 to 10,000 feet and storage: 50,000 feet
maximum.
7.7 Vibration: Non-operating 0.01g^2/Hz at 5Hz,sloping to 0.02g^2/Hz at 20Hz,and maintaining
0.02g^2/Hz from 20Hz to 500Hz.The area under the PSD curve is 3.13 Grms.The duration shall be
10 minutes
Per axis for all three axes on all samples.
7.8 Mechanical shock:Non-operating 50g,trapezoidal input;velocity change 170in/s.
Three drops on each of six faces are applied to each sample.
8. Power supply timeing

DELTA ELECTRONICS, INC.


THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF DELTA
ELECTRONICS, INC. AND SHALL NOT BE REPRODUCED OR USED AS THE
BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES
WITHOUT PERMISSION.

Date

Drawn

Design (EE)

Design (ME)

12/05/11

File Name: DF-PSLA4V-2R00.DOC

DESCRIPTION:

(Electrical Specification)
MODEL NO.

DPS-200PB-176 C
REV.

DOCUMENT NO. :

ES-200PB-176 C
SHEET 5

00
OF

AC
H

REM OTE

OFF

ON

OFF

ON

VH

VH

+5V
0V

R
E
T
N
E
L
C IA
C NT
O
D DE
I
A
T NF
L
E
D CO

T4

T2

PG
0V

T1

Note:

T3

(1) T1: Rise time (0.1ms<T1<20ms).

(2) T2: Power good signal turn on delay time (100ms<T2<500ms).


(3) T3: Power good signal turn off delay time (T31ms, at 100Vac 60Hz).
(4) T4: Power hold-on time (T48ms).
(5) Power good rise time 10ms.

(6) VH: +4.75V for +5V.


(7) When the supply is turned off for a minimum of 1 second and turned on, the power good signal
will be generated.

(8) Remote on/off control definition as below:

The power supply DC output (Exception of +5VSB) shall be enabled with an active low,
TTL-Compatible signal (PS_ON).The PS_ON# pin shall be pulled up to +5VSB via a 3Kohm
resistor within the power supply,+5VSB shall be on wherever AC power is present. When

DELTA ELECTRONICS, INC.


THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF DELTA
ELECTRONICS, INC. AND SHALL NOT BE REPRODUCED OR USED AS THE
BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES
WITHOUT PERMISSION.

Date

Drawn

Design (EE)

Design (ME)

12/05/11

File Name: DF-PSLA4V-2R00.DOC

DESCRIPTION:

(Electrical Specification)
MODEL NO.

DPS-200PB-176 C
REV.

DOCUMENT NO. :

ES-200PB-176 C
SHEET 6

00
OF

PS_ON# is pulled to TTL low the DC output and +5VSB are to be enabled . When PS_ON# is
pulled to TTL high or open-circuited, the DC output are to be disabled. The DC output enable
circuit shall be SEL V-compliant.
PS_ON
Active _Low
Active _high or Open Circuit

Remote ON/OFF Signal


Main Power Output
ON
OFF

+5VSB Outputs
ON
ON

9. Burn-in: At 455 , 100% load and 2 hours minimum.


10. M.T.B.F.: The MTBF shall be 100,000 hours minimum when operate at 35 ambient, 115Vac input
and maximum load.

R
E
T
N
E
L
C IA
C NT
O
D DE
I
A
T NF
L
E
D CO

11. Cap life calculation: Under 115Vac/230Vac/80%loading/ 50 AMB, life is more than 3years

DELTA ELECTRONICS, INC.


THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF DELTA
ELECTRONICS, INC. AND SHALL NOT BE REPRODUCED OR USED AS THE
BASIS FOR THE MANUFACTURE OR SELL OF APPARATUSES OR DEVICES
WITHOUT PERMISSION.

Date

Drawn

Design (EE)

Design (ME)

12/05/11

File Name: DF-PSLA4V-2R00.DOC

DESCRIPTION:

(Electrical Specification)
MODEL NO.

DPS-200PB-176 C
REV.

DOCUMENT NO. :

ES-200PB-176 C
SHEET 7

00
OF

You might also like