This document contains self-assessment questions about telecommunication networks and systems. It covers topics like:
1. The main subsystems that make up a telecommunication network.
2. The differences between fixed networks like PSTN and mobile networks like PLMN.
3. Processes involved in developing a PCM signal from analog signals like filtering, sampling, quantization, encoding and line coding.
4. Components and functions of electronic switching systems and stored program control exchanges.
This document contains self-assessment questions about telecommunication networks and systems. It covers topics like:
1. The main subsystems that make up a telecommunication network.
2. The differences between fixed networks like PSTN and mobile networks like PLMN.
3. Processes involved in developing a PCM signal from analog signals like filtering, sampling, quantization, encoding and line coding.
4. Components and functions of electronic switching systems and stored program control exchanges.
This document contains self-assessment questions about telecommunication networks and systems. It covers topics like:
1. The main subsystems that make up a telecommunication network.
2. The differences between fixed networks like PSTN and mobile networks like PLMN.
3. Processes involved in developing a PCM signal from analog signals like filtering, sampling, quantization, encoding and line coding.
4. Components and functions of electronic switching systems and stored program control exchanges.
1. A telecommunication network may therefore be considered as a system consisting of 3
interacting subsystems.(2,3,4) 2. The fixed networks are known as PSTN.. and the mobile networks are as PLMN 3. PSTN stands forPublic switched telephone network.and PLMN stands forpublic land mobile network . 4. STM1 can accomate____63_________32 Mbps streams_(64 /63 /16 ) 5. PABX is access------------network (access/distribution /core) 6. NGN. is a packet-based network that can use multiple transport network technologies (PSTN/NGN) 7. To develop a PCM signal from several analogue signals, the following processing steps are required: Filtering ,Sampling, Quantization , Encoding, Line Coding.( digitization , Quantization) 8. Define the processes involved in developing a PCM signal. Filtering ,Sampling, Quantization Encoding & Line Coding 9. The duration of one frame is 125 micro.. and of one time slot is 3.9 micro sec. 10. Any changes in facilities require addition of hardware and/or large amount of wiring change in Electronic Exchange.(T/F) F
Theory SELF ASSESSMENT QUESTIONS W2/1
1) SPC stands for STORED PROGRAMME CONTROL. 2) Signaling Interface is one of the basic block of SPC Exchange .(T/F) True 3) There are two types of electronic switching system. TIME. division and Space Division. 4) Explain the acronym BORSCHT B-Battery feed O-overload protection, R-Ringing, S-Supervision of loop status,C=coding H- Hybrid,T-Connection to test unit 5) Marker..performs physical setup and release of paths through the switching network, under the control of CC.(scanner / Marker) 6) Initially, all signaling between automatic exchanges was (decadic/DTMF)decadic 7) Centralized battery at the exchange normally is (-48/+52) -48 v 8) CAS stands for channel associated signalling 9) The connection frame in a local exchange on which local cable pairs and exchange equipment are terminated for inter connecting.(DP/MDF) MDF 10) In cold standby the downtime is greater than in hot standby.(T/F)T
Theory SELF ASSESSMENT QUESTIONS W2/2
1. Each subscriber is identified by a Directory Number.. and a Terminal Equipment Number. 2. Subscriber's priority for service during congestion can be one of the data describing subscriber characteristics.(T/F) T 3. The creation of an individual subscriber line involves issuing a man-machine command, after the line has been connected at MDF .( T/F) T 4. Whenever there is any change in the subscriber's line characteristics the existing data can be modified..through a command. 5. The minimum period of safe custody will be 3months in BSNL Network.. 6. Shifts on all India basis is not allowed .(T/F) F 7. List the three types of Call forwarding.: Immediate, OnBusy,On No Reply 8. Traffic Restrictions in the Outgoing Directions can allow a subscriber to prevent all outgoing calls .(T/F) T 9. In a Three Party Conference Service the subscriber can switch between the first and second connection .(T/F) T 10. The malicious call identification (MCI) feature allows the destination . of malicious calls to be identified. ( origin/destination)